ZH
RU
ES
super microscope objective
super microscope objective, Total:265 items.
In the international standard classification, super microscope objective involves: Optical equipment, Screw threads, Fasteners, Optics and optical measurements, Geology. Meteorology. Hydrology, Welding, brazing and soldering, Vocabularies, Optoelectronics. Laser equipment, Linear and angular measurements, Water quality, Products of the textile industry, Testing of metals, Animal feeding stuffs, Hydraulic fluids, Protection against crime, Analytical chemistry, Insulating fluids, Surface treatment and coating, Iron and steel products, Microbiology, Aerospace fluid systems and components, Coals, Fluid power systems, Ceramics, Textile fibres, Mechanical testing, Electrical equipment for working in special conditions.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, super microscope objective
- GB/T 2609-2015 Microscopes.Objectives
- GB/T 2609-2006 Microscope.Objectives
- GB/T 2609-1996 Microscope--Objectives
- GB 2609-1981 Object lens for microscopes series
- GB/T 22056-2008 Microscopes-Marking of objectives and eyepieces
- GB/T 2985-1999 Biological microscope
- GB/T 2985-2008 Biological microscope
- GB/T 22055.2-2008 Microscopes-Screw threads for objectives and related nosepieces-Part 2:Screw thread type M25×0.75mm
- GB/T 22055.1-2008 Microscopes-Screw threads for objectives and related nosepieces-Part 1:Screw thread type RMS(4/5in×1/36in)
- GB/T 6462-2005 Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method
- GB/T 6462-1986 Metallic and oxide coatings--Measurement of coating thickness--Microscopical method
- GB/T 19267.6-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 6: Scanning electron microscopy
- GB/T 28044-2011 General guide of detection method for nanomaterial biological effect by transmission electron microscope (TEM)
- GB/T 17507-1998 General specification of thin biological standards for X-Ray-Ray EDS microanalysis in electron microscope
- GB/T 18873-2002 General specification of transmission electron microscope(TEM)--X-ray energy dispersive spectrum(EDS) quantitative microanalysis for thin biological specimens
- GB/T 18873-2008 General guide of transmission electron microscope (TEM)-X-ray energy dispersive spectrometry (EDS) quantitative microanalysis for thin biological specimens
- GB/T 17361-2013 Microbeam analysis.Identification of authigenic clay mineral in sedimentary rock menthod by scanning electron microscope and energy dispersive spectrometer
- GB/T 19267.6-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 6:Scanning electron microscope/X ray energy dispersive spectrometry
- GB/T 17507-2008 General specification of thin biological standards for X-ray EDS microanalysis in transmission electron microscope
- GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
Korean Agency for Technology and Standards (KATS), super microscope objective
Japanese Industrial Standards Committee (JISC), super microscope objective
British Standards Institution (BSI), super microscope objective
- BS ISO 19012-2:2010 Optics and photonics. Designation of microscope objectives. Chromatic correction
- BS ISO 19012-2:2013 Microscopes. Designation of microscope objectives. Chromatic correction
- BS ISO 8038:2013 Microscopes. Screw threads for objectives and related nosepieces
- BS ISO 19012-1:2013 Microscopes. Designation of microscope objectives. Flatness of field/Plan
- BS ISO 8578:2012 Microscopes. Marking of objectives and eyepieces
- BS 7012-15:1997 Light microscopes - Marking of objectives and eyepieces
- BS ISO 19012-3:2015 Microscopes. Designation of microscope objectives. Spectral transmittance
- BS ISO 21073:2019 Microscopes. Confocal microscopes. Optical data of fluorescence confocal microscopes for biological imaging
- BS 7012-4.1:1998 Light microscopes - Specification for microscope objective and nosepiece screw threads - Screw thread type RMS (4/5 in x 1/36 in)
- 23/30444981 DC BS ISO 19012-4. Microscopes. Designation of microscope objectives - Part 4. Polarization characteristics
- 18/30339977 DC BS ISO 21073. Microscopes. Confocal microscopes. Optical data of fluorescence confocal microscopes for biological imaging
- BS 7011 Sec.2.1:1989 Consumable accessories for light microscopes. Slides. Specification for dimensions and optical properties
- BS EN 50353:2001 Insulating oil - Determination of fibre contamination by the counting method using a microscope
- BS ISO 5061:2002 Animal feeding stuffs - Determination of castor oil seed husks - Microscope method
- BS EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- BS EN ISO 1463:2021 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- BS EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Test methods for wavefront aberrations
- 20/30395419 DC BS EN ISO 1463. Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- BS DD CEN/TS 843-6:2004 Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Guidance for fractographic investigation
- BS EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermoehl technique)
- PD ISO/TS 22292:2021 Nanotechnologies. 3D image reconstruction of rod-supported nano-objects using transmission electron microscopy
- BS ISO 17751:2007 Textiles - Quantitative analysis of animal fibres by microscopy - Cashmere, wool, speciality fibres and their blends
- BS ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
American National Standards Institute （ANSI), super microscope objective
American Society of Mechanical Engineers (ASME), super microscope objective
Professional Standard - Machinery, super microscope objective
机械工业部, super microscope objective
International Organization for Standardization (ISO), super microscope objective
- ISO 8038:2013 Microscopes.Screw threads for objectives and related nosepieces
- ISO 8578:2012 Microscopes - Marking of objectives and eyepieces
- ISO 19012-2:2013 Microscopes - Designation of microscope objectives - Part 2: Chromatic correction
- ISO/DIS 19012-4 Microscopes — Designation of microscope objectives — Part 4: Polarization characteristics
- ISO 21073:2019 Microscopes — Confocal microscopes — Optical data of fluorescence confocal microscopes for biological imaging
- ISO 19012-1:2011 Microscopes - Designation of microscope objectives - Part 1: Flatness of field/Plan
- ISO 19012-1:2013 Microscopes.Designation of microscope objectives .Part 1: Flatness of field/Plan
- ISO 19012-3:2015 Microscopes - Designation of microscope objectives - Part 3: Spectral transmittance
- ISO 8038:2011 Microscopes — Screw threads for objectives and related nosepieces
- ISO 8038:1985 Optics and optical instruments; Microscopes; Screw thread for objectives
- ISO 8578:1997/Cor 1:2002 Optics and optical instruments - Microscopes - Marking of objectives and eyepieces; Technical Corrigendum 1
- ISO 19012-2:2009 Optics and photonics - Designation of microscope objectives - Part 2: Chromatic correction
- ISO 8038-2:2001 Optics and optical instruments - Screw threads for microscope objectives and related nosepieces - Part 2: Screw thread type M25 x 0,75 mm
- ISO 19012-1:2007 Optics and photonics - Designation of microscope objectives - Part 1: Flatness of field/Plan
- ISO 5061:2002 Animal feeding stuffs - Determination of castor oil seed husks - Microscope method
- ISO 14880-1:2001/Cor 1:2003 Microlens array - Part 1: Vocabulary; Technical Corrigendum 1
- ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
- ISO 1463:1973 Title missing - Legacy paper document
- ISO 1463:1982 Metallic and oxide coatings; Measurement of coating thickness; Microscopical method
- ISO 1463:2003 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- ISO 14880-1:2001/Cor 2:2005 Optics and photonics - Microlens arrays - Part 1: Vocabulary; Technical Corrigendum 2
- ISO 14880-1:2016 Optics and photonics - Microlens arrays - Part 1: Vocabulary and general properties
- ISO 4407:1991 Hydraulic fluid power; fluid contamination; determination of particulate contamination by the counting method using a microscope
- ISO 14880-2:2006 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations
- ISO 17751:2007 Textiles - Quantitative analysis of animal fibres by microscopy - Cashmere, wool, speciality fibres and their blends
- ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties
- ISO/TS 22292:2021 Nanotechnologies — 3D image reconstruction of rod-supported nano-objects using transmission electron microscopy
国家市场监督管理总局、中国国家标准化管理委员会, super microscope objective
- GB/T 22056-2018 Microscopes—Marking of objectives and eyepieces
- GB/T 35098-2018 Microbeam analysis—Transmission electron microscopy—Morphological identification method of plant viruses by transmission electron microscopy
RU-GOST R, super microscope objective
- GOST 3469-1991 Mikroscopes. Screw threads for objectives. Dimensions
- GOST 11200-1975 Objectives and body-tubes of the microscopes. Attaching dimensions
American Society for Testing and Materials (ASTM), super microscope objective
- ASTM E210-63(2005) Standard Specification for Microscope Objective Thread
- ASTM E210-63(2010) Standard Specification for Microscope Objective Thread
- ASTM E2382-04 Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
- ASTM D1245-84(2003) Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM E2228-10 Standard Guide for Microscopic Examination of Textile Fibers
- ASTM E2382-04(2012) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
- ASTM D1245-84(1999) Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D1245-84(2007) Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D1245-17 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM E2142-08 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
- ASTM E3060-16 Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy
- ASTM D1245-08 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D1245-11 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy
- ASTM D5596-94 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
- ASTM D5596-03 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
- ASTM D5596-03(2009) Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
- ASTM E2142-08(2015) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
- ASTM E2142-08(2023) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
- ASTM C1322-02a Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
- ASTM C1322-02 Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
- ASTM E2142-01 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
Association Francaise de Normalisation, super microscope objective
- NF S10-500*NF ISO 21073:2020 Microscopes - Confocal microscopes - Optical data of fluorescence confocal microscopes for biological imaging
- NF ISO 21073:2020 Microscopes - Microscopes confocaux - Données optiques des microscopes confocaux à fluorescence pour l'imagerie biologique
- NF S10-132-1:2005 Microlens array - Part 1 : vocabulary.
- NF A91-110:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method.
- NF A91-110*NF EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
- NF A91-110:1995 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method.
- NF T90-379*NF EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Uterm？hl technique)
- NF S10-132-2*NF EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Part 2 : test methods for wavefront aberrations
- NF EN 15204:2006 Qualité de l'eau - Norme guide pour le dénombrement du phytoplancton par microscopie inversée (méthode Utermöhl)
- NF S10-132-1:2016 Optics and photonics - Microlens arrays - Part 1 : vocabulary and general properties
- NF G07-142:2009 Textiles - Quantitative analysis of animal fibres by microscopy - Cashmere, wool, speciality fibres and their blends.
- NF S10-132-4*NF EN ISO 14880-4:2006 Optics and phonotics - Microlens arrays - Part 4 : test methods for geometrical properties.
Military Standards (MIL-STD), super microscope objective
Group Standards of the People's Republic of China, super microscope objective
National Metrological Technical Specifications of the People's Republic of China, super microscope objective
Guangdong Provincial Standard of the People's Republic of China, super microscope objective
KR-KS, super microscope objective
- KS B ISO 8578-2016 Optics and optical instruments－Microscopes－Marking of objectives and eyepieces
- KS B ISO 19012-1-2016 Optics and photonics－Designation of microscope objectives－Part 1：Flatness of field/Plan
- KS B ISO 8038-2-2023 Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces — Part 2: Screw thread type M25 × 0.75 mm
- KS B ISO 8038-1-2023 Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces — Part 1: Screw thread type RMS(4/5 in × 1/36 in)
HU-MSZT, super microscope objective
Professional Standard - Water Conservancy, super microscope objective
CZ-CSN, super microscope objective
- CSN 72 1084-1974 Methodics of pyrogenic microscopy of anorganic substances
- CSN 75 7711-1987 Water Quality Microscopical biological qualitative and quantitative analysis
- CSN 75 7712-1998 Water quality - Biological analysis - Determination of bioseston
Association of German Mechanical Engineers, super microscope objective
Professional Standard - Commodity Inspection, super microscope objective
- SN/T 0297-1993 Rules for inspection of biologicalmicroscop for export
- SN/T 3129.2-2013 Rules for the inspection of optical instruments for import and export.Part 2:Biological microscopes
国家进出口商品检验局, super microscope objective
- SN 0297-1993 "Export Biological Microscope Inspection Regulations"
PT-IPQ, super microscope objective
- NP 452-1986 Microbiologie alimentaire. Laits. Examen microscopique du sédlment
Shanxi Provincial Standard of the People's Republic of China, super microscope objective
- DB14/T 1965-2019 Technical Regulations for Microscopic Determination of Density of Woven Fabrics
IN-BIS, super microscope objective
SE-SIS, super microscope objective
- SIS 11 11 11-1974 Methods for assessing the slag inclusion content in steel. Microscopic methods
- SIS SMS 2953-1971 Measurement of metal and oxide coating thicknesses by microscopic examination of cross-sections
RO-ASRO, super microscope objective
- STAS 5949-1980 DRTRRMINATION OF NON-METALIC STEELS Microscopie method
- STAS 1456/2-1974 Steels for rolling bearings DETERMINATION OF BANDED CARBIDES Microscopical method
- STAS 7856-1967
- SR ISO 4407:1991 Hydraulic fluid power -Fluid contamination - Determinatidn of particulate contamination by the counting method using a microscope
Taiwan Provincial Standard of the People's Republic of China, super microscope objective
- CNS 2910-2008 Microscopic testing method for non-metallic inclusions in steel
- CNS 2910-1986 Microscopic Testing Method for the Non-Metallic Inclusions in Steel
Danish Standards Foundation, super microscope objective
- DS/ISO 5061:2002 Animal feeding stuffs - Determination of castor oil seed husks - Microscope method
- DS/ISO 1463:1983 Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
- DS/EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermöhl technique)
- DS/EN ISO 1463:2021 Metallic and oxide coatings – Measurement of coating thickness – Microscopical method (ISO 1463:2021)
农业农村部, super microscope objective
- NY/T 3002-2016 Microscopy method for detection of animal-derived components in feed
Professional Standard - Construction Industry, super microscope objective
- JG/T 70-1999 Microscope count method for solid particle filth in oil liquid
Professional Standard - Public Safety Standards, super microscope objective
- GA/T 1659-2019 Forensic Science Cashmere Fiber Inspection Biomicroscopy
- GA/T 1936-2021 Forensic Science Chemical Fiber Evidence Cross Section Shape Examination Microscopy
- GA/T 909-2010 Collecting and packaging method for trace evidence-Gunshot residue(SEM/EDS examination)
- GA/T 1522-2018 Forensic Science Shooting Residue Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, super microscope objective
- GB/T 33834-2017 Microbeam analysis—Scanning electron microscopy—Scanning electron microscope analysis of biological specimens
- GB/T 34168-2017 Test method of gold and silver nanoparticle materials biological effect by transmission electron microscope
- GB/T 33839-2017 Methods of transmission electron microscope for biological specimen containing carbon nanomaterials involving biological effect
German Institute for Standardization, super microscope objective
- DIN ISO 8038-2:2006 Optics and optical instruments - Microscopes - Screw threads for objectives and related nosepieces - Part 2: Screw thread type M 25 x 0,75 mm (ISO 8038-2:2001);English version of DIN ISO 8038-2:2006
- DIN ISO 8038-1:2006 Optics and optical instruments - Microscopes - Screw threads for objectives and related nosepieces - Part 1: Screw thread type RMS (4/5 in x 1/36 in) (ISO 8038-1:1997);English version of DIN ISO 8038-1:2006
- DIN EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003); German version EN ISO 1463:2004
- DIN 58959-4:1997 Quality management in medical microbiology - Part 4: Requirements for investigations using light microscopes
- DIN 58943-32:1995 Medical microbiology - Diagnosis of tuberculosis - Part 32: Detection of mycobacteria by microscopic methods
- DIN EN 15204:2006-12 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermöhl technique); German version EN 15204:2006
- DIN 58959-4:1997-06 Quality management in medical microbiology - Part 4: Requirements for investigations using light microscopes / Note: To be replaced by DIN 58959-6 Beiblatt 2 (2021-08, t).
- DIN EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2006); English version of DIN EN ISO 14880-2:2007-03
Professional Standard - Environmental Protection, super microscope objective
- HJ 1215-2021 Determination of water quality phytoplankton filter membrane-microscopic counting method
- HJ 1216-2021 Determination of water quality phytoplankton 0.1 ml counting frame-microscopic counting method
AENOR, super microscope objective
- UNE 32301:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MICROSCOPICALLY THE REFLECTANCE OF VITRINITE.
- UNE-EN ISO 1463:2005 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
- UNE-EN 15204:2007 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Uterm？hl technique)
European Committee for Standardization (CEN), super microscope objective
- EN ISO 14880-1:2019 Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO 14880-1:2019)
- EN ISO 14880-1:2005 Optics and photonics - Microlens array - Part 1: Vocabulary
- EN ISO 1463:1994 Metallic and Oxide Coatings - Measurement of Coating Thickness - Microscopical Method (ISO 1463 : 1982)
- EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
- EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
- EN ISO 14880-2:2006 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations
- EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Uterm?hl technique)
ZA-SANS, super microscope objective
- SANS 144:1982 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
YU-JUS, super microscope objective
- JUS C.A6.031-1990 Metal11c and oxid coatlngs. tteasurement of coatlng thickness. Hicroscopical method
PL-PKN, super microscope objective
- PN C05551-1987 Water and waste water Determination of the phytoplankton ?uantity by using the inverted microscope
ES-UNE, super microscope objective
- UNE-EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
Society of Automotive Engineers (SAE), super microscope objective
- SAE AS598-2012 Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
未注明发布机构, super microscope objective
- SAE AS598A-2081 Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
SAE - SAE International, super microscope objective
- SAE AS598A-2018 Aerospace Microscopic Sizing and Counting of Particulate Contamination for Fluid Power Systems
GOSTR, super microscope objective
- GOST R 57868-2017 Polymer composites. Identification of polymer layers and inclusions by infrared microscopy
Lithuanian Standards Office , super microscope objective
- LST EN ISO 1463:2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)
- LST EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
- LST EN 15204-2007 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermöhl technique)
AT-ON, super microscope objective
- OENORM EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
CH-SNV, super microscope objective
- SN EN ISO 1463:2021 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2021)
Standard Association of Australia （SAA）, super microscope objective
- AS 1766.3.10:1994 Food microbiology Method 3.10:Examination for specific products - Liquid milks - Direct microscopic count
NO-SN, super microscope objective
- NS 1181-1979 Metal and oxide coating - Measurement of thickness by microscopical examination of cross-sections