ZH
RU
ES

Authentic packaging material testing

Authentic packaging material testing, Total:414 items.

In the international standard classification, Authentic packaging material testing involves: Packaging materials and accessories, Sensory analysis, Materials and articles in contact with foodstuffs, Freight distribution of goods, Food products in general, Protection against dangerous goods, Packaging and distribution of goods in general, Testing of metals, Sterilization and disinfection, Aerospace fluid systems and components, Analytical chemistry, Wastes, Sacks. Bags, Fluid power systems, Equipment for petroleum and natural gas industries, Products of the chemical industry, Dentistry, Milk and milk products, Hospital equipment, Powder metallurgy, Medical sciences and health care facilities in general, Construction materials, Fluid storage devices, Radiation protection, Tobacco, tobacco products and related equipment, Paper products, Adhesives, Rubber and plastics products, Environmental protection, Road engineering, Spools. Bobbins, Electrical wires and cables, Quality, Processes in the food industry, Measurement of force, weight and pressure, Protection of and in buildings, Laboratory medicine, Air quality, Organic chemicals, Metrology and measurement in general, Graphical symbols, Radiation measurements, Printed circuits and boards.

AT-ON, Authentic packaging material testing

ONORM A 5510-1981 Sensory testing of packaging materials and packages for food products
ONORM A 5550-1978 determination of filling rate of packages;volume stable means of packaging; contents marked to weight
OENORM EN ISO 8222/A1:2021 Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) - Correction of two typographical errors (ISO 8222:2020/DAM 1:2021) (Amendment)
ONORM IEC 264-4-1:1992 Packaging of winding wires - Methods of test - Plastic delivery spools made from thermoplastic material Conditionnement des fils de bobinage - Methodes d'essai - Bobines de livraison plastiques, faites de materiaux thermoplastique

German Institute for Standardization, Authentic packaging material testing

DIN 10050-9:1973 Testing of butter wrappers; determination of transmission
DIN 10050-7:1973 Testing of butter wrappers, determination of water soluble components of the surface of the wrapper contacting butter
DIN 10955:2004 Sensory analysis - Testing of packaging materials and packages for foodstuffs
DIN 10050-4:1973 Testing of butter wrappers; determination of resistance against delamination
DIN 55540-1 Bb.1:1979 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
DIN 55542-2:2021-10 Packaging test - Determination of capacity for means of packaging, cylindrical tubes
DIN EN 14477:2004-06 Packaging, Flexible packaging material - Determination of puncture resistance - Test methods; German version EN 14477:2004
DIN 55529:2012-09 Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
DIN 55529:2005 Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
DIN 55529:2012 Packaging - Determining the sealed-seam strength of sealings made of flexible packaging material
DIN 55404:2014 Packaging test - Method of test for determining the pattern repeat of flexible packaging materials
DIN 55404:2020 Packaging test - Method of test for determining the pattern repeat of flexible packaging materials
DIN SPEC 91441:2019-12 Packaging - Test method for determination of the peel strength of sealable packaging materials
DIN EN 15507:2009 Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades; English version of DIN EN 15507:2009-02
DIN 50157-2:2008 Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices
DIN 55533:2005 Packaging testing - Integral test method for packagings made of films or foils for leakage using a flexible test chamber with tracer gas
DIN 6127:2023-02 Packaging test - Determination of the application weight of adhesives, printing inks, etc. in packaging materials
DIN 55540-1 Beiblatt 1:1979 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
DIN 55540-1 Beiblatt 1:1979-01 Testing of packaging; determining the filling ratio of prepacks; form relating to coefficients of variation for the density of the packaged material and for the package for adhesives and allied products
DIN 55534:2006-08 Testing of taste transfer from packages and packaging materials through the head space using water as the test medium
DIN EN 15507:2018 Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades; German version EN 15507:2017
DIN 55543-3:1985 Testing of packaging; methods of test for plastic sacks; determination of the strenght of longitudinal seams
DIN 58953-6:2016 Sterilization - Sterile supply - Part 6: Microbial barrier testing of packaging materials for medical devices which are to be sterilized
DIN 58953-6:2010 Sterilization - Sterile supply - Part 6: Microbial barrier testing of packaging materials for medical devices which are to be sterilized
DIN EN ISO 12807:2021-05 Safe transport of radioactive materials - Leakage testing on packages (ISO 12807:2018); German version EN ISO 12807:2021
DIN EN ISO 11607-1/A1:2022-08 Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems - Amendment 1 (ISO 11607-1:2019/DAM 1:2022); German and English version EN ISO 11607-1:2020/prA1:2022 / Note: Date o...
DIN EN 14045:2003-06 Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions; German version EN 14045:2003
DIN EN ISO 10893-9:2020 Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011 + Amd 1:2020) (includes Amendment A1:2020)
DIN 50162:1978 Testing of clad steels; determination of shear strength between cladding metal and parent metal in shear test
DIN EN 14048:2003-03 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer; German version EN 14048:2002
DIN ISO 20370:2012-10 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content (ISO 20370:2009)
DIN ISO 2965:2021-01 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability - Determination of air permeability (ISO 2965:2019)
DIN EN 14047:2003-03 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide; German version EN 14047:2002
DIN EN 1720:1998 Adhesives for paper and board, packaging and disposable sanitary products - Determination of dispersability; German version EN 1720:1998
DIN EN 1719:1998 Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack; German version EN 1719:1998
DIN EN ISO 3386-1:2015 Polymeric materials, cellular flexible - Determination of stress-strain characteristics in compression - Part 1: Low-density materials (ISO 3386-1:1986 + Amd 1:2010) (includes Amendment A1:2010)
DIN 55543-4:1985 Testing of packaging; methods of test for plastic sacks; determination of the shrinkage of polyethylene films
DIN 53757:1977 Testing of plastics articles; determination of the behaviour by stacking by long-time-test, boxes for transport and storage
DIN ISO 2965:2021 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability - Determination of air permeability (ISO 2965:2019)
DIN ISO 2965:2012 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability - Determination of air permeability (ISO 2965:2009)
DIN EN 60264-4-1:2011-11 Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials (IEC 60264-4-1:1997 + A1:2009); German version EN 60264-4-1:2010 / Note: DIN EN 60264-4-1 (1995-11) remains valid alongside this standard until 2...
DIN EN 15534-1:2018 Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products (includes Amendment A1:2017)
DIN ISO 20369:2012 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content (ISO 20369:2009)
DIN 10370:1998 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content
DIN 10259:1998 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content
DIN ISO 12219-8:2019-01 Interior air of road vehicles - Part 8: Handling and packaging of materials and components for emission testing (ISO 12219-8:2018)
DIN 55465-2:1992 Packaging made from paper or polyethylene for waste; bags with a nominal capacity up to 50 l, shapes, dimensions, requirements, tests
DIN EN ISO 8222:2020 Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) (ISO 8222:2020)
DIN EN ISO 16148:2020 Gas cylinders - Refillable seamless steel gas cylinders and tubes - Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing (ISO 16148:2016 + Amd 1:2020) (includes Amendment :2020)
DIN EN ISO 9863-1:2020 Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2016 + Amd.1:2019) (includes Amendment A1:2019)
DIN 58953-6:2023-04 Sterilization - Sterile supply - Part 6: Microbial barrier testing of packaging materials for medical devices which are to be sterilized / Note: Date of issue 2023-03-17*Intended as replacement for DIN 58953-6 (2016-12).
DIN 58953-6:2016-12 Sterilization - Sterile supply - Part 6: Microbial barrier testing of packaging materials for medical devices which are to be sterilized
DIN 58953-6:2023-11 Sterilization - Sterile supply - Part 6: Microbial barrier testing of packaging materials for medical devices which are to be sterilized
DIN ISO 20370:2012 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content (ISO 20370:2009)
DIN EN ISO 15148:2018 Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion (ISO 15148:2002 + Amd 1:2016) (includes Amendment :2016)
DIN EN ISO 8222:2022-04 Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) (ISO 8222:2020 + Amd 1:2022); German version EN ISO 8222:2020 + A1:2022
DIN 32567-3:2014-10 Production equipment for microsystems - Determination of the influence of materials on the optical and tactile dimensional metrology - Part 3: Derivation of correction values for tactile measuring devices
DIN ISO 20369:2012-10 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content (ISO 20369:2009)
DIN EN 438-2:2019 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties (includes Amendment A1:2018)
DIN EN 62022:2008 Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles (IEC 62022:2004, modified); German version EN 62022:2007
DIN ISO 12219-8:2019 Interior air of road vehicles - Part 8: Handling and packaging of materials and components for emission testing (ISO 12219-8:2018)
DIN EN 868-10:2019-03 Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods; German version EN 868-10:2018
DIN EN 16523-2:2019 Determination of material resistance to permeation by chemicals - Part 2: Permeation by potentially hazardous gaseous chemicals under conditions of continuous contact (includes Amendment A1:2018)
DIN EN 868-5:2019-03 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods; German version EN 868-5:2018
DIN EN 60264-4-2:2004-10 Packaging of winding wires - Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools (IEC 60264-4-2:1992 + A1:2003); German version EN 60264-4-2:1994 + A1:2004 / Note: DIN EN 60264-4-2 (1995-11) remai...
DIN EN 868-9:2019-03 Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods; German version EN 868-9:2018

HU-MSZT, Authentic packaging material testing

Professional Standard - Agriculture, Authentic packaging material testing

303药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4002 Determination of packaging materials by infrared spectroscopy

海关总署, Authentic packaging material testing

SN/T 5232-2019 Testing of modified atmosphere packaging of fresh-cut products made of food contact materials

Association Francaise de Normalisation, Authentic packaging material testing

NF EN 14477:2004 Emballage - Matériaux d'emballage souples - Détermination de la résistance à la perforation - Méthodes d'essai
NF EN ISO 13274:2013 Emballages - Emballages de transport pour marchandises dangereuses - Essais de compatibilité des matières plastiques pour emballages et GRVs
NF H34-082*NF EN 14477:2004 Packaging - Flexible packaging material - Determination of puncture resistance - Test methods.
NF EN ISO 11607-1/A11:2022 Emballages des dispositifs médicaux stérilisés au stade terminal - Partie 1 : exigences relatives aux matériaux, aux systèmes de barrière stérile et aux systèmes d'emballage - Amendement A11
NF M08-005/A1*NF EN ISO 8222/A1:2022 Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) - Amendment 1 : correction of two typographical errors
NF H00-112:2009 Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades.
NF S98-051-9:2009 Packaging materials for terminally sterilized medical devices - Part 9 : uncoated nonwoven materials of polyolefines - Requirements and test methods.
NF EN 14045:2003 Emballage - Évaluation de la désintégration des matériaux d'emballage lors d'essais à usage pratique dans des conditions de compostage définies
NF EN IEC 62244:2021 Instrumentation pour la radioprotection - Portiques de détection des rayonnements (RPM) installés pour la détection du trafic illicite de matières radioactives et nucléaires
NF E48-041:1995 Hydraulic fluid power. Multiple lip packing sets. Methods for measuring stock heights.
NF EN 14048:2003 Emballage - Détermination de la biodégradabilité aérobie ultime des matériaux d'emballage dans un milieu aqueux - Méthode de mesure de la demande d'oxygène dans un respiromètre fermé
NF EN 14047:2003 Emballage - Détermination de la biodégradabilité aérobie ultime des matériaux d'emballage dans un milieu aqueux - Méthode par analyse du dioxyde de carbone libéré
NF S98-051-2:2009 Packaging materials for terminally sterilized medical devices - Part 2 : sterilization wrap - Requirements and test methods.
NF H60-148*NF EN 14048:2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
NF H60-147*NF EN 14047:2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxyde
NF V37-010*NF ISO 2965:2020 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability - Determination of air permeability
NF EN 62694:2017 Instrumentation pour la radioprotection - Détecteur de rayonnement de type sac-à-dos (BRD) pour la détection du trafic illicite des matières radioactives
NF S98-051-6:2009 Packaging materials for terminally sterilized medical devices - Part 6 : paper for low temperature sterilization processes - Requirements and test methods.
NF M08-005*NF EN ISO 8222:2020 Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials)
NF S98-051-5:2009 Packaging for terminally sterilized medical devices - Part 5 : sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods.
NF S98-051-10:2009 Packaging for terminally sterilized medical devices - Part 10 : adhesive coated nonwoven materials of polyolefines - Requirements and test methods.
NF A03-003:1994 Metallic materials. Tensile test. Part 3 : calibration of force proving instruments used for the verification of uniaxial testing machines.
NF EN 868-10:2018 Matériaux et systèmes d'emballage pour les dispositifs médicaux stérilisés au stade terminal - Partie 10 : matériaux non tissés à base de polyoléfines enduits d'adhésif - Exigences et méthodes d'essai
NF EN 868-9:2018 Matériaux et systèmes d'emballage pour les dispositifs médicaux stérilisés au stade terminal - Partie 9 : matériaux non tissés à base de polyoléfines, non enduits - Exigences et méthodes d'essai
NF V37-010:2009 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability - Determination of air permeability.
NF X43-408-8*NF ISO 12219-8:2018 Interior air of road vehicles - Part 8 : handling and packaging of materials and components for emission testing
NF ISO 12219-8:2018 Air intérieur des véhicules routiers - Partie 8 : manutention et emballage des matériaux et des composants pour les essais d'émissions
NF V37-070*NF ISO 20370:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content
XP ISO/TS 21975:2020 Nanotechnologies - Films nanocomposites polymères pour emballages alimentaires avec des propriétés barrières - Spécification des caractéristiques et méthodes de mesure
NF C19-109*NF EN IEC 62244:2021 Radiation protection instrumentation - Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials
NF EN 60264-4-2/A1:2004 Conditionnement des fils de bobinage - Partie 4-2 : méthodes d'essai - Conteneurs faits de matériau thermoplastique pour bobines de livraison à fût de forme conique
NF EN IEC 62401:2019 Instrumentation pour la radioprotection - Dispositifs individuels d'alarme aux rayonnements pour la détection du trafic illicite des matières radioactives
NF D25-101-6*NF EN 1186-6:2003 Materials and articles in contact with foodstuffs - Plastics - Part 6 : test methods for overall migration into olive oil using a pouch.
NF T76-402*NF EN 1721:1999 Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of rolling ball tack.
NF C19-111*NF EN 62022:2008 Installed monitors for the control and detection of gamma radiations contained in recyclable or non recyclable materials transported by vehicles
NF T76-315:2012 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature.
NF T76-315*NF EN 12703:2016 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
NF EN IEC 63121:2021 Instrumentation pour la radioprotection - Systèmes mobiles montés sur véhicules pour la détection du trafic illicite des matières radioactives

PL-PKN, Authentic packaging material testing

PN O79119-1974 Packaging materials Determination of flexual rigidity
PN O79118-1985 Flexible packaging materials Determination of the coefficients of friction
PN O79112-1964 Packaging materials. Method of sensoric. Determination of odour permeability
PN O79114-1987 Packing materials and packings Determination of odour and taste penetration of direct contact
PN E04160-19-1992 Electric cables Methods of testing Evaluation of coverage density of braid and wrapping

Danish Standards Foundation, Authentic packaging material testing

DS/EN 14477:2004 Packaging - Flexible packaging material - Determination of puncture resistance - Test methods
DS/EN 14045:2003 Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
DS/EN ISO 15912/A1:2011 Dentistry - Casting investments and refractory die materials - Amendment 1: Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials
DS/ISO 20370:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content
DS/EN 14048:2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
DS/ISO 20369:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content
DS/EN ISO 3325/A1:2002 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1: Precision statement
DS/EN 14047:2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
DS/EN 60264-4-1:2011 Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials
DS/EN 62244:2011 Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders
DS/EN IEC 62244:2021 Radiation protection instrumentation – Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials

Lithuanian Standards Office , Authentic packaging material testing

LST EN 14477-2004 Packaging - Flexible packaging material - Determination of puncture resistance - Test methods
LST EN 14045-2003 Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
LST EN ISO 15912:2007/A1:2011 Dentistry - Casting investments and refractory die materials - Amendment 1: Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials (ISO 15912:2006/Amd.1:2011)
LST EN 14048-2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
LST EN 14047-2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
LST EN ISO 3325:2002/A1:2003 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1: Precision statement (ISO 3325:1996/Amd. 1:2001)
LST EN 60264-4-1-2011 Packaging of winding wires -- Part 4-1: Methods of test - Delivery spools made from thermoplastic materials (IEC 60264-4-1:1997 + A1:2009)

AENOR, Authentic packaging material testing

UNE-EN 14477:2004 Packaging - Flexible packaging material - Determination of puncture resistance - Test methods
UNE-EN 14045:2003 Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions.
UNE-ISO 2965:2011 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having an oriented permeable zone -- Determination of air permeability
UNE-EN ISO 3325/A1:2002 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1: Precision statement. (ISO 3325:1996/Amd. 1:2001)
UNE-EN 14048:2003 Packaging. Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium. Method by measuring the oxygen demand in a closed respirometer.
UNE-EN 14047:2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide.

SG-SPRING SG, Authentic packaging material testing

SS 323 Pt.D1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part D1 : Assessment Of Odour From Packaging Materials Used For Foodstuff
SS 323 Pt.A1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part A1 : Determination Of Thickness
SS 323 Pt.B3-1987 Methods Of Test For Flexible Plastic Packaging Materials Part B3 : Determination Of Transparency
SS 323 Pt.E2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part E2 : Determination Of Gas Permeability Characteristics
SS 323 Pt.C3-1987 Methods Of Test For Flexible Plastic Packaging Materials Part C3 : Determination Of Initial Tear Resistance
SS 323 Pt.C4-1987 Methods Of Test For Flexible Plastic Packaging Materials Part C4 : Determination Of Openability
SS 323 Pt.B2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part B2 : Determination Of Specular Gloss
SS 323 Pt.C1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part C1 : Determination Of Tensile Properties
SS 323 Pt.G1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part G1 : Determination Of Printability
SS 323 Pt.0-1987 Methods Of Test For Flexible Plastic Packaging Materials Part 0 : General Introduction
SS 323 Pt.F1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part F1 : Determination Of Heat Seal Strength
SS 323 Pt.B1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part B1 : Determination Of Haze And Luminous Transmittance Of Transparent Plastics
SS 323 Pt.D4-1987 Methods Of Test For Flexible Plastic Packaging Materials Part D4 : Determination Of Resistance Of Grease And Oil
SS 323 Pt.E1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part E1 : Determination Of Water Vapour Transmission
SS 323 Pt.D3-1987 Methods Of Test For Flexible Plastic Packaging Materials Part D3 : Determination Of Residual Solvent
SS 323 Pt.F2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part F2 : Determination Of Unrestrained Linear Thermal Shrinkage
SS 323 Pt.C2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part C2 : Determination Of Impact Resistance (By Falling Weight Method)
SS 323 Pt.C5-1987 Methods Of Test For Flexible Plastic Packaging Materials Part C5 : Determination Of Static And Kinetic Coefficients Of Friction
SS 323 Pt.A2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part A2 : Determination Of Density By The Density-Gradient Technique
SS 323 Pt.D2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part D2 : Determination Of Odour Resistance/ Taint From Environment
SS 323 Pt.D6-1987 Methods Of Test For Flexible Plastic Packaging Materials Part D6 : Determination Of Residual Styrene Monomer In Polystyrene By Gas Chromatography

CZ-CSN, Authentic packaging material testing

CSN 77 0341-1976 Testing of thermal endurance of strained packaging materials
CSN 77 0338-1989 Method of determination of protective efficiency of plastic packaging materials and packages against optical radiation
CSN 77 0333-1985 Determination of gas permeability of packaging materials. Interferometric method
CSN 77 1313-1990 Laminated package materials. Determination method of coherence between layers
CSN 77 0850-1986 Packaging dispersive adhesives. Determi- nation of the volume of foam
CSN 77 0336-1987 Determination of organic vapours permeability of plastic packaging materials. Interferometric method
CSN 77 0226-1987 Determination of effect to organoleptic properties of foodstuffs. Sensory evaluation test.
CSN 77 0854-1987 Dutermination of the influonce of the packaging adhcsives on the corosion of the metal materials
CSN 77 0312-1982 Testing of the influence of fluid fillings on the weld strength of thermoplastic and combined packaging materials
CSN IEC 264-4-1:1994 Packaging of winding wires. Part 4: Methods of test. Section One: Delivery spools made from thermoplastic material
CSN 66 6403 Zb-1983
CSN 66 6345-1988 Additives for polymer materials DINI- TROSOPENTAMETYLENETETRA- MIN. Test methods, packing, marking, transport and storage

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Authentic packaging material testing

GB/T 5009.178-2003 Determination of formaldehyde for food packaging material
GB/T 19789-2005 Packaging material.Test method for oxygen gas permeability characteristics of plastic film and sheeting.Coulometric sensor
GB/T 21928-2008 Determination of phthalate esters in food plastic packaging materials
GB/T 41704-2022 Test methods of cathode materials for lithium ion battery—Determination of magnetic impurities content and residual alkali content
GB/T 13477.4-2002 Test method for building sealants Part 4: Determination of extrudability of one-component sealants
GB/T 5009.101-2003 Determination of antimony in polyester resin and products for food containers and packaging materials
GB/T 13120-1996 Method for determination of antimony in polyester resin and products for food containers and packaging materials
GB/T 5009.122-2003 Determination of residual ethylidene dichloride in polyvinyl chloride resin and product for food container and packaging material
GB/T 23243-2009 Determination of perfluorooctane sulfonates (PFOS) in the food packaging material.High performance liquid chromatography-tandem mass spectrometry

United States Navy, Authentic packaging material testing

NAVY MIL-STD-3010 C-2013 TEST PROCEDURES FOR PACKAGING MATERIALS AND CONTAINERS

British Standards Institution (BSI), Authentic packaging material testing

BS EN 14477:2004 Packaging - Flexible packaging material - Determination of puncture resistance - Test methods
BS EN 15507:2008 Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
BS EN 15507:2017 Tracked Changes. Packaging. Transport packaging for dangerous goods. Comparative material testing of polyethylene grades
BS 3177:1959 Method for determining the permeability to water vapour of flexible sheet materials used for packaging
BS EN 14048:2002 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
BS EN 14047:2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
BS EN 14047:2002 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
BS ISO 2965:2019 Tracked Changes. Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability. Determination of air permeability
BS ISO 12219-8:2018 Interior air of road vehicles - Handling and packaging of materials and components for emission testing
BS PD CR 13695-1:2000 Packaging — Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment Part 1: Requirements for measuring and verifying the four heavy metals presen
BS ISO 20370:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content
17/30352083 DC BS EN 62244. Radiation protection instrumentation. Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials
BS ISO 20369:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content
BS EN 60264-4-2:1995 Packaging of winding wires. Methods of test. Containers made from thermoplastic material for taper barrelled delivery spools
BS EN IEC 62244:2021 Tracked Changes. Radiation protection instrumentation. Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials
BS ISO 11513:2019 Tracked Changes. Gas cylinders. Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene). Design, construction, testing, use and periodic inspection
BS EN 868-9:2018 Tracked Changes. Packaging for terminally sterilized medical devices. Uncoated nonwoven materials of polyolefines. Requirements and test methods
BS EN 61158-3-2:2014+A1:2019 Tracked Changes. Packaging for terminally sterilized medical devices. Sealable pouches and reels of porous materials and plastic film construction. Requirements and test methods

European Committee for Standardization (CEN), Authentic packaging material testing

EN 14477:2004 Packaging - Flexible packaging material - Determination of puncture resistance; Test methods
EN 15507:2008 Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
EN 15507:2017 Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
PD CEN/TR 13695-2:2004 Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment - Part 2: Requirements for measuring and verifying dangerous substances present in packa
EN ISO 11607-1:2020/prA1 Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems - Amendment 1 (ISO 11607-1:2019/DAM 1:2022)
EN 868-9:2009 Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods
EN 14047:2002 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide
EN 14048:2002 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer
prEN 2002-4-1978 Test methods for metallic materials; part 4: calibration of dynamometric calibration devices; aerospace series
EN 12062:1997 Non-destructive examination of welds General rules for metallic materials Includes amendments A1:2002 and A2:2003
EN 12062:1997/AC1:2003 Non-destructive examination of welds General rules for metallic materials Includes amendments A1:2002 and A2:2003
EN 1719:1998 Adhesives for paper and board, packaging and disposable sanitary products - Tack measurement for pressure sensitive adhesives - Determination of loop tack
EN 868-5:2009 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
EN 15051-2:2013+A1:2016 Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method
EN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection
EN ISO 24817:2017 Petroleum@ petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design@ installation@ testing and inspection

Professional Standard - Commodity Inspection, Authentic packaging material testing

SN/T 3881-2014 Determination of arsenic,barium,cadmium, chromium,mercury,lead,selenium, stibium in packing materials for import and export.ICP-MS method
SN/T 1724-2006 Phytosanitary procedure of Bursaphelenchus xylophilus (Steiner & Buhrer) Nickle for entry coniferous raw woods, wood products and wood packing materials
SN/T 3006-2011 Determination of volatile organic compounds in printing inks used for packaging materials.Gas chromatography method
SN/T 3949-2014 Plastic package.Determination of harmful material bisphenol A.Conjuction of antigen and antibody method
SN/T 4148-2015 Determinaiton of volatile organic compounds(VOCs) in packing materials- Static headspace gas chromatography
SN/T 2277-2009 Food contact materials.Determination of diaminomethylbezen for packaging material.Gas chromatography/mass spectrometry

American Society for Testing and Materials (ASTM), Authentic packaging material testing

ASTM F3039-23 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
ASTM F2251-03 Standard Test Method for Thickness Measurement of Flexible Packaging Material
ASTM F2251-13(2018) Standard Test Method for Thickness Measurement of Flexible Packaging Material
ASTM F303-78(1996) Standard Practices for Sampling Aerospace Fluids from Components
ASTM F3039-13 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
ASTM F3039-15 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
ASTM F303-08(2016) Standard Practices for Sampling for Particles in Aerospace Fluids and Components
ASTM F2251-03e1 Standard Test Method for Thickness Measurement of Flexible Packaging Material
ASTM F2251-03(2008) Standard Test Method for Thickness Measurement of Flexible Packaging Material
ASTM F2251-13 Standard Test Method for Thickness Measurement of Flexible Packaging Material
ASTM F2251-13(2023) Standard Test Method for Thickness Measurement of Flexible Packaging Material
ASTM F1884-04 Standard Test Method for Determining Residual Solvents in Packaging Materials
ASTM F1884-98 Standard Test Method for Determining Residual Solvents in Packaging Materials
ASTM F1884-04(2011) Standard Test Method for Determining Residual Solvents in Packaging Materials
ASTM F1884-04(2023) Standard Test Methods for Determining Residual Solvents in Packaging Materials
ASTM F1884-04(2018) Standard Test Methods for Determining Residual Solvents in Packaging Materials
ASTM C1174-97 Standard Practice for Prediction of the Long-Term Behavior of Waste Package Materials Including Waste Forms Used in the Geologic Disposal of High-Level Nuclear Waste
ASTM F2228-02(2007) Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO₂ Tracer Gas Method
ASTM F2228-13(2021) Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
ASTM F2228-13 Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
ASTM F1929-15 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
ASTM D3666-07ae1 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
ASTM D3666-09 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
ASTM D3666-11 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
ASTM D3666-13 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
ASTM D3666-16 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
ASTM F2228-02 Standard Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO₂ Tracer Gas Method
ASTM E2833-12(2018) Standard Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction Activities and Materials Used in Construction, Including Special Inspection
ASTM E2833-12 Standard Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction Activities and Materials Used in Construction, Including Special Inspection
ASTM F1277-95 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
ASTM C1363-05 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C1363-11 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM F1929-12 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
ASTM F1277-02 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
ASTM F2638-18 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
ASTM F2638-07 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
ASTM F1277-02(2009) Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
ASTM F2638-12e1 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
ASTM F2638-22 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
ASTM F2638-12 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier

(U.S.) Ford Automotive Standards, Authentic packaging material testing

FORD FLTM AS 002-1-2001 DETERMINATION OF VOLATILE CORROSION INHIBITOR IN PACKAGING MATERIALS
FORD FLTM AS 002-01-2001 DETERMINATION OF VOLATILE CORROSION INHIBITOR IN PACKAGING MATERIALS

ES-UNE, Authentic packaging material testing

UNE-EN 15507:2018 Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
UNE-EN ISO 12807:2021 Safe transport of radioactive materials - Leakage testing on packages (ISO 12807:2018) (Endorsed by Asociación Española de Normalización in March of 2021.)
UNE-EN ISO 8222:2021/A1:2022 Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) - Amendment 1: Correction of two typographical errors (ISO 8222:2020/Amd 1:2022)
UNE-EN ISO 8222:2021 Petroleum measurement systems - Calibration - Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) (ISO 8222:2020)
UNE-EN IEC 62244:2021 Radiation protection instrumentation - Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials (Endorsed by Asociación Española de Normalización in March of 2021.)
UNE-EN IEC 62401:2019 Radiation protection instrumentation - Alarming personal radiation devices (PRDs) for the detection of illicit trafficking of radioactive material (Endorsed by Asociación Española de Normalización in November of 2019.)
UNE-EN 868-5:2019 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
UNE-EN 868-9:2019 Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods

国家市场监督管理总局、中国国家标准化管理委员会, Authentic packaging material testing

GB/T 19789-2021 Packaging material—Test method for oxygen gas permeability characteristics of plastic film and sheeting—Coulometric sensor
GB/T 41347-2022 Test method for flex durability of flexible packaging material

Anhui Provincial Standard of the People's Republic of China, Authentic packaging material testing

DB34/T 2993-2017 Determination of fluorescent whitening agents in food paper packaging materials by high performance liquid chromatography
DB34/T 2433-2015 Determination of Photoinitiators in Plastic Packaging Materials by Gas Chromatography-Tandem Mass Spectrometry
DB34/T 1767-2012 Determination of benzophenone and 4-methylbenzophenone residues in plastic food packaging materials
DB34/T 2565-2015 Determination of dimethyl isophthalate in plastic food packaging materials by gas chromatography-mass spectrometry
DB34/T 1995-2013 Determination of Dioctyl Isophthalate in Food Plastic Packaging Materials by Gas Chromatography-Mass Spectrometry
DB34/T 1532-2011 Determination of Diallyo(o-)phthalate in food plastic packing materials Gas Chromatography-Mass Spectrometry method
DB34/T 1996-2013 Determination of residues of dibutylhydroxytoluene and butylated hydroxyanisole in food plastic packaging materials
DB34/T 1994-2021 Determination of migration of di(2-ethyl)hexyl isophthalate in food plastic packaging materials by gas chromatography-mass spectrometry
DB34/T 1994-2013 Determination of migration of di(2-ethyl)hexyl isophthalate in food plastic packaging materials by gas chromatography-mass spectrometry
DB34/T 1769-2021 Determination of Migration of Diaminotoluene Substances in Composite Food Packaging Materials by Liquid Chromatography-Mass Spectrometry/Mass Spectrometry

RU-GOST R, Authentic packaging material testing

GOST R 51864-2002 Packagings. Testing methods of handle fastening strength
GOST 32828-2014 Milk and milk products in consumer packaging from combined materials. The method of the package chemical stability determination
GOST R 51295-2014 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability. Determination of air permeability
GOST 32827-2014 Milk and milk products in consumer packaging from combined materials. The method of formaldehyde migration determination
GOST R ISO 17511-2006 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of values assigned to calibrators and control materials
GOST R 51521-1999 Refrigerants, propellants, production in aerosol packing and polymer materials. Test methods of ozone destroying substances
GOST R 8.742-2011 State system for ensuring the uniformity of measurements. Measuring installations of 1-st class of moisture content in firm substances and materials. Verification procedure

International Organization for Standardization (ISO), Authentic packaging material testing

ISO 11607-1:2019/FDAmd 1 Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems — Amendment 1
ISO 11513:2019 Gas cylinders — Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) — Design, construction, testing, use and periodic inspection
ISO 11513:2011 Gas cylinders - Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene) - Design, construction, testing, use and periodic inspection
ISO 20369:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of citrate content
ISO 2965:2019 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability — Det
ISO 20370:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products - Determination of acetate content
ISO 8222:2020/Amd 1:2022 Petroleum measurement systems — Calibration — Volumetric measures, proving tanks and field measures (including formulae for properties of liquids and materials) — Amendment 1: Correction of two typogr

YU-JUS, Authentic packaging material testing

JUS H.P8.094-1988 Testing ofpesticides. Simazine, technical. Determination of material soluble in n-hexane
JUS H.M8.114-1982 Testing of accessory materials for rubber industr/. Determination of pour density of pelleted carbon black

VN-TCVN, Authentic packaging material testing

TCVN 6946-2001 Materials used as cigarette paper, filter plug wrap and filter joining paper including materials having an oriented permeable zone.Determination of air permeability

SAE - SAE International, Authentic packaging material testing

SAE J2989-2018 Handling and Packaging of Materials and Components for Emissions Testing
SAE AIR4827B-2016 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier

Hebei Provincial Standard of the People's Republic of China, Authentic packaging material testing

DB13/T 2190.1-2015 Determination of total migration in water environment simulants of plastic packaging materials
DB13/T 2190.2-2015 Determination of specific migration of BHA and BHT in water environment simulants of plastic packaging materials
DB13/T 1081.17-2009 Food packaging materials and plastic products - Part 17: Determination of carbonyl chloride content
DB13/T 1081.8-2009 Plastics for food packaging materials and products - Part 8: Determination of isocyanate content
DB13/T 1081.9-2009 Determination of specific migration of vinyl acetate in food packaging materials and products
DB13/T 1081.4-2009 Plastics for food packaging materials and products - Part 4: Determination of 1,3-butadiene content
DB13/T 1081.6-2009 Food packaging materials and plastic products - Part 6: Determination of vinylidene chloride content
DB13/T 1081.20-2009 Plastics for food packaging materials and products - Part 20: Determination of epichlorohydrin content
DB13/T 1081.3-2009 Plastics for food packaging materials and products - Part 3: Determination of specific migration of acrylonitrile
DB13/T 1081.13-2009 Plastics for food packaging materials and products - Part 13: Determination of specific migration of bisphenol A
DB13/T 2190.3-2015 Determination of migration of benzene series in water environment simulants of plastic packaging materials by gas chromatography
DB13/T 2190.14-2015 Determination of migration of acrylonitrile in water environment simulants of plastic packaging materials by gas chromatography
DB13/T 1081.2-2009 Plastics for food packaging materials and products - Part 2: Determination of specific migration of terephthalic acid
DB13/T 1081.10-2009 Plastics for food packaging materials and products - Part 10: Determination of specific migration of acrylamide
DB13/T 1081.15-2009 Plastics for food packaging materials and products - Part 15: Determination of specific migration of 1,3-butadiene
DB13/T 1081.12-2009 Plastics for food packaging materials and products - Part 12: Determination of specific migration of m-xylylenediamine
DB13/T 1081.5-2009 Plastics for food packaging materials and products - Part 5: Determination of specific migration of vinylidene chloride
DB13/T 2190.10-2015 Determination of vinyl acetate migration in water environment simulants of plastic packaging materials by gas chromatography
DB13/T 2190.5-2015 Determination of bisphenol A migration in water environment simulants of plastic packaging materials by high performance liquid chromatography
DB13/T 1081.28-2009 Plastics for food packaging materials and products - Part 28: Determination of specific migration of 1,1,1-trimethylolpropane
DB13/T 1081.29-2009 Plastics for food packaging materials and products - Part 29: Determination of the specific migration of 16 polycyclic aromatic hydrocarbons
DB13/T 1081.22-2009 Food packaging materials and plastic products - Part 22: Determination of ethylene oxide and propylene oxide content
DB13/T 1081.25-2009 Plastics for food packaging materials and products - Part 25: Determination of specific migration of 4-methyl-1-pentene
DB13/T 2190.11-2015 Determination of melamine migration in water environment simulants of plastic packaging materials by high performance liquid chromatography
DB13/T 2190.13-2015 Determination of migration of acrylamide in water environment simulants of plastic packaging materials by high performance liquid chromatography
DB13/T 1081.11-2009 Plastics for food packaging materials and products - Part 11: Determination of the specific migration of 11-aminoundecanoic acid
DB13/T 1081.7-2009 Plastics for food packaging materials and products - Part 7: Determination of the specific migration of ethylene glycol and diethylene glycol
DB13/T 1081.31-2009 Plastics for food packaging materials and products - Part 31: Determination of the specific migration of 23 primary aromatic amines
DB13/T 1081.1-2009 Plastics for Food Packaging Materials and Products Part 1: Guidelines for Determination of Migration and Content of Chemical Substances
DB13/T 1081.21-2009 Plastics for food packaging materials and products - Part 21: Determination of specific migration of ethylenediamine and hexamethylenediamine
DB13/T 2190.6-2015 Determination of the migration of azodicarbonamide in water environment simulants of plastic packaging materials by high performance liquid chromatography
DB13/T 2190.7-2015 Determination of migration of terephthalic acid in water environment simulants of plastic packaging materials by high performance liquid chromatography
DB13/T 2190.9-2015 Determination of m-xylylenediamine migration of water environment simulants in plastic packaging materials by high performance liquid chromatography
DB13/T 1081.26-2009 Food packaging materials and plastic products - Part 26: Determination of specific migration of 1-octene and tetrahydrofuran
DB13/T 1081.30-2009 Plastics for food packaging materials and products - Part 30: Determination of the specific migration of six phthalates
DB13/T 1081.24-2009 Plastics for food packaging materials and products - Part 24: Determination of specific migration of maleic acid and maleic anhydride
DB13/T 2190.12-2015 Determination of the migration of 1,1,1-trimethanolpropane in water environment simulants of plastic packaging materials by gas chromatography-mass spectrometry
DB13/T 1081.23-2009 Plastics for food packaging materials and products - Part 23: Determination of specific migration of formaldehyde and hexamethylenetetramine
DB13/T 1081.16-2009 Plastics for food packaging materials and products - Part 16: Determination of specific migration of caprolactam and caprolactam salts
DB13/T 1081.19-2009 Plastics for food packaging materials and products - Part 19: Determination of specific migration of 2-(N,N-dimethylamino)ethanol
DB13/T 1081.27-2009 Plastics for food packaging materials and products - Part 27: Determination of specific migration of 2,4,6-triamino-1,3,5-triazine (melamine)
DB13/T 2190.8-2015 Determination of migration of phthalates in water environment simulants of plastic packaging materials by gas chromatography-mass spectrometry
DB13/T 1081.14-2009 Plastics for food packaging materials and products - Part 14: Determination of specific migration of 3,3-bis(3-methyl-4-hydroxyphenyl)-2-indolinone
DB13/T 2190.4-2015 Determination of specific migration quantities of antimony, arsenic, barium, cadmium, lead, mercury and selenium in water environment simulants of plastic packaging materials by inductively coupled plasma mass spectrometry

PT-IPQ, Authentic packaging material testing

NP 1393-1976

ET-QSAE, Authentic packaging material testing

ES 409-2000

IN-BIS, Authentic packaging material testing

未注明发布机构, Authentic packaging material testing

BS 7539:1992(1999) Methods for test for Determination of properties of cushioning materials for package design purposes
BSI Flex 6228:2022 Plastic packaging – Assessment of recycled content within polyethylene terephthalate (PET) virgin material and recyclate blended packaging materials produced from mechanical recycling methods – Speciﬁcation and test methods
DIN EN 868-1:1997 Packaging materials and systems for medical devices which are to be sterilized — Part 1: General requirements and test methods

Fujian Provincial Standard of the People's Republic of China, Authentic packaging material testing

DB35/T 1850-2019 Determination of carcinogenic dyes in plastic packaging materials by liquid chromatography-tandem mass spectrometry

Standard Association of Australia （SAA）, Authentic packaging material testing

ISO 11607-1:2019/Amd 1:2023 Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems — AMENDMENT 1: Application of risk management
AS 1079.5:2003 Packaging of items (sterile) for patient care - Single-use, non-woven wrapping materials - For goods undergoing sterilization in health care facilities

Professional Standard - Pharmaceutical Packaging, Authentic packaging material testing

YBB 0041-2004 Test methods for clean room to produce pharmaceutical packaging materials
YBB 00412004-2015 Test methods for clean rooms (areas) of pharmaceutical packaging material production plants

Group Standards of the People's Republic of China, Authentic packaging material testing

T/FDCA 001-2021 Determination of migratable fluorescent whitening agents in cosmetic packaging materials
T/CSIQ 78008-2020 Determination of nonyl phenol in food packaging plastic materials— Liquid chromatography-mass chromatography method
T/SDAQI 078-2023 Food packaging plastic materials and products—Determination of migration of 1-Hexene—Headspace gas chromatography method
T/SDAQI 080-2023 Food packaging plastic materials and products—Determination of migration of isophthalic acid—High-performance liquid chromatography
T/SDAQI 079-2023 Food packaging plastic materials and products— Determination of oleic amide and erucic amide—Gas chromatography mass spectrometry
T/SDAQI 081-2023 Food packaging plastic materials and products—Determination of content and migration of Rhodamine B—High-performance liquid chromatography

ES-AENOR, Authentic packaging material testing

UNE 53-366-1985

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Authentic packaging material testing

GB/T 13477.4-2017 Test method for building sealants—Part 4：Determination of extrudability of one-component sealants

API - American Petroleum Institute, Authentic packaging material testing

API STD 976-2018 Refractory Installation Quality Control - Inspection and Testing of AES/RCF Fiber Linings and Materials (FIRST EDITION)

CU-NC, Authentic packaging material testing

NC 97-92-1987 Packaging. Determination of Water-Steam Transmission Coefficient for Flexible Materials by the Gravimetric Method. Testing Method

Korean Agency for Technology and Standards (KATS), Authentic packaging material testing

KS B ISO 11513-2012(2022) Gas cylinders－Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging(excluding acetylene)－Design, construction, testing, use and periodic inspection
KS C IEC 62022-2012(2017) Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles
KS H ISO 2965:2021 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability —Dete
KS B ISO 7500-1:2003 Metallic materials-Verification of static uniaxial testing machines-Part 1:Tension/compression testing machines-Verification and calibration of the force-measuring system
KS B ISO 7500-1:2013 Metallic materials－Verification of static uniaxial testing machines－Part 1：Tension/compression testing machines－Verification and calibration of the force-measuring system
KS H ISO 20369:2012 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products－Determination of citrate content
KS H ISO 20370-2012(2017) Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products－Determination of acetate content
KS H ISO 2965-2014(2019) Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability — Det
KS H ISO 20369-2012(2017) Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products－Determination of citrate content
KS H ISO 20370-2012(2022) Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products－Determination of acetate content
KS H ISO 20369-2012(2022) Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products－Determination of citrate content
KS H ISO 20370:2012 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products－Determination of acetate content
KS B ISO 11513-2012(2017) Gas cylinders－Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging(excluding acetylene)－Design, construction, testing, use and periodic inspection
KS B ISO 11513:2022 Gas cylinders — Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging(excluding acetylene) — Design, construction, testing, use and periodic inspection
KS C IEC 62022-2012(2022) Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles

KR-KS, Authentic packaging material testing

KS H ISO 2965-2021 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability —Dete
KS B ISO 11513-2022 Gas cylinders — Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging(excluding acetylene) — Design, construction, testing, use and periodic inspection

CENELEC - European Committee for Electrotechnical Standardization, Authentic packaging material testing

EN 60079-29-2:2007 Explosive atmospheres - Part 29-2: Gas detectors - Selection@ installation@ use and maintenance of detectors for flammable gases and oxygen (Incorporating Corrigendum December 2007)
EN 60811-3-1:1995 Insulating and Sheathing Materials of Electric Cables Common Test Methods Part 3: Methods Specific to PVC Compounds Section 1: Pressure Test at High Temperature Tests for Resistance to Cracking (Incorporates Amendment A1: 1996)

IT-UNI, Authentic packaging material testing

AGMA - American Gear Manufacturers Association, Authentic packaging material testing

2000-A88 ERTA-1989 Gear Classification and Inspection Handbook Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents)
2000-A88 ERTA-1990 Gear Classification and Inspection Handbook Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents)
2000-A88 ERTA-1992 Gear Classification and Inspection Handbook Tolerances and Measuring Methods for Unassembled Spur and Helical Gears (Including Metric Equivalents)

CEN - European Committee for Standardization, Authentic packaging material testing

EN 868-5:2018 Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods

International Electrotechnical Commission (IEC), Authentic packaging material testing

IEC 60264-4-1:1997/AMD1:2009 Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials
IEC 62244:2019 Radiation protection instrumentation - Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials
IEC 62022:2004 Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles
IEC 61249-2-43:2016 Materials for printed boards and other interconnecting structures - Part 2-43: Reinforced base materials clad and unclad - Non-halogenated epoxide cellulose paper/woven E-glass reinforced laminate she

American National Standards Institute （ANSI), Authentic packaging material testing

ANSI/ASTM E2833:2012 Practice for Certification Bodies that Certify Personnel Engaged in Inspection and Testing of Construction Activities and Materials Used in Construction, Including Special Inspection

Sichuan Provincial Standard of the People's Republic of China, Authentic packaging material testing

DB51/T 1940-2014 Determination of the migration of plasticizers in plastic packaging materials in oily foods by gas chromatography-mass spectrometry

AT-OVE/ON, Authentic packaging material testing

OVE EN IEC 62244:2020 Radiation protection instrumentation - Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials

The American Road & Transportation Builders Association, Authentic packaging material testing

AASHTO HM-23 PT I-2003 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part I: Specifications 23rd Edition; Includes Part IA and Part IB
AASHTO HM-23 PT I HDBK-2003 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part I: Specifications 23rd Edition; Includes Part IA and Part IB
AASHTO HM-23 PT II-2003 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part II Tests 23rd Edition; Includes Part IIA and Part IIB
AASHTO HM-23 PT II HDBK-2003 Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part II: Tests 23rd edition; Includes Part IIA and Part IIB

European Committee for Electrotechnical Standardization（CENELEC）, Authentic packaging material testing

EN 62022:2007 Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles

Professional Standard - Medicine, Authentic packaging material testing

YY/T 1432-2016 Test method for determination of heatsealability of flexible webs of medical devices as measured by seal strength