ZH
RU
ES

The main spectrophotometer

The main spectrophotometer, Total:499 items.

In the international standard classification, The main spectrophotometer involves: Lighting, Optics and optical measurements, Products of the chemical industry, Water quality, Raw materials for rubber and plastics, Metalliferous minerals, Non-ferrous metals, Coals, Road engineering, Surface treatment and coating, Ferroalloys, Medical equipment, Analytical chemistry, Tobacco, tobacco products and related equipment, Ferrous metals, Inorganic chemicals, Leather technology, Non-metalliferous minerals, Graphic technology, Air quality, Testing of metals, Fertilizers, Paints and varnishes, General methods of tests and analysis for food products, Organic chemicals, Pulps, Fruits. Vegetables, Microprocessor systems, Optoelectronics. Laser equipment, Lamps and related equipment, Optical equipment, Metrology and measurement in general, Petroleum products in general, Solar energy engineering, Terminology (principles and coordination), Particle size analysis. Sieving, Ceramics, Glass, Fuels, Vibrations, shock and vibration measurements, Wastes, Plastics, Fibre optic communications, Non-destructive testing, Nuclear energy engineering, Dentistry, Radiation measurements, Spices and condiments. Food additives, Lubricants, industrial oils and related products, Geology. Meteorology. Hydrology, Thermodynamics and temperature measurements, Refractories, Textile fibres, Internal combustion engines for road vehicles, Diagnostic, maintenance and test equipment.

CU-NC, The main spectrophotometer

NC 90-13-21-1984 Metrological Assurance. Spectrophotometers. Reference Dissolutions for the Verification of Spectrophotometers
NC 33-70-1987 Oil Industry. Determination of Naphtalenic Hydrocarbon Content in Turbofuels. Spectrophotometer Method
NC 10-66-1988 Metallurgy. Determination of Nickel in Steels and Castings Photometric and Gravimetric Methods
NC 20-06-20-1987 Medical Sciences. Photometric Determination of Calcium in Human Serum. Method of Chemical Analysis
NC 20-06-22-1987 Medical Sciences. Photometric Determination of Cholesterols Linked to High Density Lipoproteins. Method of Chemical Analysis
NC 20-06-21-1987 Medical Sciencies. Photometric Determination of Cholesterols in Human Serum. Method of Chemical Analysis

German Institute for Standardization, The main spectrophotometer

DIN 5032-7:1985 Photometry; classification of illuminance meters and luminance meters
DIN 5032-7:2017 Photometry - Part 7: Classification of illuminance meters and luminance meters
DIN 67520:2008 Retro-reflecting materials for traffic safety - Photometric minimum requirements for retro-reflective sheetings
DIN 5032-7:2016 Photometry - Part 7: Classification of illuminance meters and luminance meters
DIN 58963-2:1983-11 Optical cells for photometric measurements; precision rectangular spectrophotometric cells; dimensions, requirements
DIN 58963-3:1993-11 Optical cells for photometric measurements; disposable rectangular spectrophotometric cells; dimensions, requirements
DIN 58960-3:1988-05 Photometers for analytical tests; concepts for characterisation of technical properties for absorption photometers
DIN 5032-7:2017-02 Photometry - Part 7: Classification of illuminance meters and luminance meters
DIN 58960-3:1988 Photometers for analytical tests; concepts for characterisation of technical properties for absorption photometers
DIN 58960-4:1991-01 Photometer for analytical tests; requirements for the description of technical data for the user
DIN 58737-1:1997-09 Production in optical engineering - Spindles - Part 1: Spindles with fitting thread; inactive for new design
DIN EN 17871:2022 Glass in building - Spectrophotometric characteristics of glass products - Validation procedure for calculation tool; German and English version prEN 17871:2022
DIN EN 17871:2022-12 Glass in building - Spectrophotometric characteristics of glass products - Validation procedure for calculation tool; German and English version prEN 17871:2022 / Note: Date of issue 2022-11-18
DIN 58737-1:1997 Production in optical engineering - Spindles - Part 1: Spindles with fitting thread; inactive for new design
DIN EN ISO 9342-1:2022-07 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO/DIS 9342-1:2022); German and English version prEN ISO 9342-1:2022 / Note: Date of issue 2022-0...
DIN 20610:1994 Lighting of mine locomotives; position lamps; design features, photometric requirements
DIN EN ISO 9342-1:2005-08 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005); German version EN ISO 9342-1:2005 / Note: To be replaced by DIN EN ISO 9342-1 (2022-07).
DIN EN ISO 9342-2:2006-02 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005); German version EN ISO 9342-2:2005
DIN 58960-1:1988-05 Photometers for analytical tests; used physical-chemical basic processes
DIN 20609:1993 Lighting of mine locomotives; head lamps; design features, photometric requirements, meters and measurements
DIN 58960-1:1988 Photometers for analytical tests; used physical-chemical basic processes
DIN EN 15063-1:2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method; English version of DIN EN 15063-1:2007-01
DIN EN ISO 9342-1:2023-10 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023); German version EN ISO 9342-1:2023
DIN ISO 17714:2008 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics (ISO 17714:2007);English version of DIN ISO 17714:2008-06
DIN EN 15063-1:2015 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method; German version EN 15063-1:2014
DIN 25482-2 Bb.1:2000 Detection limit and decision threshold for ionizing radiation measurements - Part 2: Counting measurements by spectrometry, neglecting the influence of sample treatment; comments and examples

BE-NBN, The main spectrophotometer

NBN T 03-414-1983 Aluminium oxide primarily used for the production of aluminium - Determination of calcium content - Naphthalhydroxamic acid spectrophotometric method
NBN T 03-411-1983 Aluminium oxide primarily used for the production of aluminium - Determination of sodium content - Flame emission spectrophotometrie method
NBN T 03-418-1983 Aluminium oxide primarily used for the production of aluminium - Determination of fluorine content - Alizarin complexone and lanthanum chloride spectrophotometric method
NBN T 03-420-1983 Aluminium oxide primarily used for the production of aluminium - Determination of boron content - Curcumine spectrophotometric method
NBN T 03-419-1983 Aluminium oxide primarily used for the production of aluminium - Determination of phosphorus content - Reduced phosphomolybdate spectrophotometric method
NBN T 03-410-1983 Aluminium oxide primarily used for the production of aluminium - Determination oi silica content - Reduced molybdosilicate spectrophotometric method
NBN T 03-466-1983 Sodium fluoride primarily used for the production of aluminium - Determination of silica content - Reduced molybdosilicate spectrophotometric method
NBN T 03-416-1983 Aluminium oxid primarily used for the production of aluminium - Determination of zinc content - PAN photometric method
NBN T 03-404-1983 Aluminium oxide primarily used for the production of aluminium - Determination of iron content - 1,10-Phenanthroline photometric method
NBN T 03-465-1983 Sodium fluoride primarily used for the production of aluminium - Détermination of iron content - 1,10-phenanthroline photometric method
NBN T 03-406-1983 Aluminium oxide primarily used for the production of aluminium - Determination of titanium content - Diantipyrylmethane photometric method
NBN T 03-412-1983 Aluminium oxide primarily used for the production of aluminium - Determination of vanadium content - ff-Benzoyl-tf-phenylhydroxylamine photometric method

International Organization for Standardization (ISO), The main spectrophotometer

ISO 2865:1973 Aluminium oxide primarily used for the production of aluminium; Determination of boron content; Curcumin spectrophotometric method
ISO 1617:1976 Aluminium oxide primarily used for the production of aluminium; Determination of sodium content; Flame emission spectrophotometric method
ISO 2829:1973 Aluminium oxide primarily used for the production of aluminium; Determination of phosphorus content; Reduced phosphomolybdate spectrophotometric method
ISO 2828:1973 Aluminium oxide primarily used for the production of aluminium; Determination of fluorine content; Alizarin complexone and lanthanum chloride spectrophotometric method
ISO 3430:1976 Sodium fluoride primarily used for the production of aluminium; Determination of silica content; Reduced molybdosilicate spectrophotometric method
ISO 2865:1973/Cor 1:1991 Aluminium oxide primarily used for the production of aluminium — Determination of boron content — Curcumin spectrophotometric method — Technical Corrigendum 1
ISO/TS 23031:2020 Graphic technology — Assessment and validation of the performance of spectrocolorimeters and spectrodensitometers
ISO 2072:1981 Aluminium oxide primarily used for the production of aluminium; Determination of zinc content; PAN photometric method
ISO 805:1976 Aluminium oxide primarily used for the production of aluminium; Determination of iron content; 1,10- Phenanthroline photometric method
ISO 3429:1976 Sodium fluoride primarily used for the production of aluminium; Determination of iron content; 1,10- Phenanthroline photometric method
ISO 1232:1976 Aluminium oxide primarily used for the production of aluminium; Determination of silica content; Reduced molybdosilicate spectrophotometric method
ISO 1618:1976 Aluminium oxide primarily used for the production of aluminium; Determination of vanadium content; N-Benzoyl-N-phenylhydroxylamine photometric method
ISO 9342-1:2023 Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Reference lenses for focimeters used for measuring spectacle lenses
ISO/FDIS 9342-1 Optics and optical instruments — Test lenses for calibration of focimeters — Part 1: Reference lenses for focimeters used for measuring spectacle lenses
ISO 21501-3:2019 Determination of particle size distribution — Single particle light interaction methods — Part 3: Light extinction liquid-borne particle counter
ISO 900:1977 Aluminium oxide primarily used for the production of aluminium; Determination of titanium content; Diantipyrylmethane photometric method
ISO 21501-2:2019 Determination of particle size distribution — Single particle light interaction methods — Part 2: Light scattering liquid-borne particle counter
ISO/TS 18621-21:2020 Graphic technology - Image quality evaluation methods for printed matter - Part 21: Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
ISO/TS 18621-21:2023 Graphic technology — Image quality evaluation methods for printed matter — Part 21: Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
ISO 16063-11:1999 Methods for the calibration of vibration and shock transducers - Part 11: Primary vibration calibration by laser interferometry
ISO 20903:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Methods used to determine peak intensities and information required when reporting results
ISO 17714:2007 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
ISO 9337-1:1999 Contact lenses - Determination of back vertex power - Part 1: Method using focimeter with manual focusing

YU-JUS, The main spectrophotometer

JUS H.B8.612-1979 Ahtminium oxide primarily used for the production of aluminium. Determimtion of boron content - Curcumin spectrophotometric method
JUS H.B8.605-1979 Ahaninium oxide primarily med for the production of alumimum. Determinatton of sodium content. Flame emission spectrophotometric method
JUS H.B8.604-1979 Ahiminium oxide primarily used for the production of aluminium. Determination of silicon content. Reduced molybdosilicate spectrophotometric method
JUS H.B8.611-1979 Ahiminium oxide primarily used for the production of aluminium. Determination of phosphorus content - Reduced phosphomofybdate spectrophotometric method
JUS H.B8.610-1979 Ahiminium oxide primarify used for the production of ahiminium. Determimtion of fluorine content - Alizarin complexoneand lanthanum chbride spectrophotometric method
JUS H.B8.615-1979 Aluminium oxide primarily used for the production of aluminium. Determination of titanium content. Diantipyry lmethane photometric method
JUS H.B8.606-1979 Aluminium oxide primarily used for the production of aluminium. Determination ofvanadium content. N-Benzoyl-N-phenylhydroxy lamine photometric method

Korean Agency for Technology and Standards (KATS), The main spectrophotometer

KS M ISO 2865-2003(2018)
KS M ISO 1617-2003(2013) Aluminium oxide primarily used for the production of aluminium ― Determination of sodium content-flame emission spectrophotometric method
KS M ISO 3430-2007(2012) Sodium fluoride primarily used for the production of aluminium－Determination of silica content－Reduced molybdosilicate spectrophotometric method
KS M ISO 2829-2002(2012) Aluminium oxide primarily used for the production of aluminium－Determination of phosphorus content－Reduced phosphomolybdate spectrophotometric method
KS E ISO 7834:2012 Iron ores-Determination of arsenic content-Molybdenum blue spectrophotometric method
KS M ISO 1232-2003(2018)
KS M ISO 3430:2007 Sodium fluoride primarily used for the production of aluminium-Determination of silica content-Reduced molybdosilicate spectrophotometric method
KS M ISO 3430:2013 Sodium fluoride primarily used for the production of aluminium－Determination of silica content－Reduced molybdosilicate spectrophotometric method
KS M 5506-2011(2021) Testing method for infrared reflectance (from spectrophotometric date)
KS M ISO 2072-2002(2012) Aluminium oxide primarily used for the production of aluminium－Determination of zinc content－PAN photometric method
KS M ISO 6382:2004 General method for determination of silicon content－Reduced molybdosilicate spectrophotometric method
KS M ISO 3429:2007 Sodium fluoride primarily used for the production of aluminium－Determination of iron content－1,10－phenanthroline photometric method
KS M ISO 3429:2017 Sodium fluoride primarily used for the production of aluminiumDetermination of iron content-1,10-Phenanthroline photometric method
KS M ISO 3429-2017(2022) Sodium fluoride primarily used for the production of aluminiumDetermination of iron content-1,10-Phenanthroline photometric method
KS E ISO 4691:2010 Iron ores－Determination of titanium－Diantipyrylmethane spectrophotometric method
KS M ISO 1618-2002(2012) Aluminium oxide primarily used for the production of aluminium－Determination of vanadium content－N－Benzoyl－N－phenylhydroxylamine photometric method
KS M ISO 900-2003(2008) Aluminium oxide primarily used for the production of aluminium－Determination of titanium content－Diantipyrylmethane photometric method
KS M ISO 6685:2004 Chemical products for industrial use－General method for determination of iron content－1, 10－Phenanthroline spectrophotometric method
KS X ISO 14981-2003(2008) Graphic technology－Process control－Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use
KS E ISO 7990:2002 Manganese ores and concentrates－Determination of total iron content－Titrimetric method after reduction and sulfosalicylic acid spectrophotometric method
KS I ISO 17714:2009 Meteorology-Air temperature measurements-Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
KS B ISO 16063-13:2018 Methods for the calibration of vibration and shock transducers — Part 13: Primary shock calibration using laser interferometry
KS D ISO 11437-1:2012 Nickel alloys-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 1:General requirements and sample dissolution

Standard Association of Australia （SAA）, The main spectrophotometer

AS 2723:1984 Waters - Determination of uranium (VI) - Spectrophotometric method
AS 1050.19:1988 Methods for the analysis of iron and steel - Determination of nickel content - Spectrophotometric method
AS 1050.17:1988 Methods for the analysis of iron and steel - Determination of copper content - Spectrophotometric method
AS 3550.1:1988 Methods for the analysis of waters - Determination of dissolved sulphide - Spectrophotometric method
AS ISO 9342.1:2017 Optics and optical instruments — Test lenses for calibration of focimeters, Part 1: Test lenses for focimeters used for measuring spectacle lenses
AS 2365.1.1:1990 Methods for the sampling and analysis of indoor air - Determination of nitrogen dioxide - Spectrophotometric method - Treated mesh/passive tube sampling procedures
AS 2365.1.2:1990 Methods for the sampling and analysis of indoor air - Determination of nitrogen dioxide - Spectrophotometric method - Treated filter/passive badge sampling procedures
AS/NZS 3580.12.1:2015 Methods for sampling and analysis of ambient air, Method 12.1: Determination of light scattering — Integrating nephelometer method
AS/NZS 1680.3:2017 Interior and workplace lighting, Part 3: Measurement, calculation and presentation of photometric data
AS 2503.6:2007 Refractories and refractory materials - Chemical analysis - Refractories, refractory mortars and silicate materials - Determination of major and minor elements - Wavelength dispersive X-ray fluorescence spectrometry using lithium borate fusion

TR-TSE, The main spectrophotometer

TS 752-1969 CHEMICAL ANALYSIS OF ZINC PHOTOMETRIC DETERMINATION OF IRON
TS 749-1969 ALUMINIUM OXIDEPRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM DETERMINATION OF IRON CONTENT 1,10 — PHENANTHROLINE PHOTOMETRIC METHOD
TS 3617-1981 SODIUM FLUORIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — DETERMINATION OF SILICA CONTENT — REDUCED MOLYBDOSILICATE SPECTROPHOTOMETRIC METHOD
TS 1147-1973 AL.UMINTUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM DETERMINATION OF SILICA CONTENT SPECTROPHOTOMETRIC METHOD AS THE REDUCED SILICOMOLYBDATE COMPLEX
TS 1893-1975 ALUMINIUM OXIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — DETERMINATION OF FLUORINE CONTENT — AL?ZAR?N COMPLEXONE AND LANTHANUM CHLORIDE SPECTROPHOTOMETRIC METHOD
TS 3616-1981 SODIUM FLUORIDE PRIMARILY USED FOR THE PRODUCTION OF ALUMINIUM — DETERMINATION OF IRON CONTENT — 1,10 — PHENANTROLINE PHOTOMETRIC METHOD
TS 1098-1972 ALUMINIUM OXIDE PRIMARILY USED FOR THE PROD?CTION OF ALUMINIUM DETERMINATION OF TITANIUM CONTENT TIRON PHOTOMETRIC METHOD

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The main spectrophotometer

GB/T 34323-2017 Carbon black—Determination of light transmittance of water dispersion—Spectrophotometer method
GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces

Association Francaise de Normalisation, The main spectrophotometer

NF A20-425:1984 Iron ores. Spectrophotometric determination of chromium.
NF A20-421:1984 Iron ores. Spectrophotometric determination of vanadium.
NF A20-426:1984 Iron ores. Spectrophotometric determination of nickel.
NF A06-404:1975 Chemical analysis of lead. Spectrophotometric determination of bismuth.
NF A06-588:1970 Chemical analysis of aluminium. Spectrophotometric determination of vanadium.
NF A06-410:1976 Chemical analysis of lead. Spectrophotometric determination of antimony.
NF A06-408:1979 Chemical analysis of lead. Spectrophotometric determination of arsenic.
NF A06-401:1975 Chemical analysis of lead. Spectrophotometric determination of copper.
NF A06-835:1973 Zinc for galvanizing purposes. Spectrophotometric determination of aluminium.
NF A10-954:1972 Chemical analysis of ferro-vanadium. Spectrophotometric determination of phosphorus.
NF A06-405:1974 Chemical analysis of lead. Spectrophotometric determination of bismuth.
NF A10-813:1972 Chemical analysis of ferro-tungsten. Spectrophotometric determination of tin.
NF A06-612:1976 Chemical analysis of magnesium. Spectrophotometric determination of copper.
NF A20-401:1985 Iron ores. Determination of phosphorus content. Spectrophotometric method.
NF A20-423:1986 Iron ores. Determination of titanium content. Spectrophotometric determination.
NF A06-087:1966 Chemical analysis of manganese ores. Spectrophotometric determination of cobalt.
NF A06-094:1962 Chemical analysis of manganese ores. Spectrophotometric determination of titanium.
NF A06-095:1966 Chemical analysis of manganese ores. Spectrophotometric determination of vanadium.
NF A06-103:1969 Chemical analysis of manganese ores. Spectrophotometric determination of phosphorus.
NF A06-107:1970 Chemical analysis of manganese ores. Spectrophotometric determination of copper.
NF A06-823:1967 Chemical analysis of zinc alloys. Spectrophotometric determination of iron.
NF A06-827:1968 Chemical analysis of zinc alloys. Spectrophotometric determination of titanium.
NF A10-904:1972 Chemical analysis of ferro-vanadium. Spectrophotometric determination of phosphorus.
NF A21-104:1976 Chemical analysis of chromium ores. Determination of phosphorus. Spectrophotometric method.
NF A06-303:1962 Chemical analysis of steel and cast iron. Spectrophotometric determination of manganese.
NF A10-104:1986 Chemical analysis of ferro-silicon. Determination of phosphorus content. Spectrophotometric method.
NF A10-504:1986 Chemical analysis of silico-chromium. Determination of phosphorus content. Spectrophotometric method.
NF A10-404:1986 Chemical analysis of ferro-chromium. Determination of phosphorus content. Spectrophotometric method.
NF A10-204:1986 Chemical analysis of ferro-manganese. Determination of phosphorus content. Spectrophotometric method.
NF A20-402:1985 Iron ores. Determination of phosphorus content. Molybdenum blue spectrophotometric method.
NF A06-622:1984 Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of manganese.
NF A06-624:1984 Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of zirconium.
NF A06-563:1971 Chemical analysis of aluminium alloys. Spectrophotometric determination of antimony
NF A06-568:1971 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of tin.
NF A06-571:1964 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of iron.
NF A06-574:1966 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of titanium
NF A06-576:1966 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of manganese.
NF A06-582:1959 Chemical analysis of aluminium and aluminium alloys. Colorimetric determination of zirconium.
NF A06-586:1965 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of boron.
NF A06-713:1970 Chemical analysis of copper and its alloys. Spectrophotometric determination of silicon.
NF A06-714:1968 Chemical analysis of copper and its alloys. Spectrophotometric determination of aluminium.
NF A06-716:1970 Chemical analysis of copper and copper alloys. Spectrophotometric determination of manganese.
NF A06-802:1971 Chemical analysis of zinc and its alloys. Spectrophotometric determination of tin.
NF A06-569:1972 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of tin.
NF A06-613:1976 Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of copper.
NF A06-616:1981 Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of nickel.
NF A06-717:1983 Chemical analysis of copper and copper alloys. Spectrophotometric determination of arsenic.
NF A06-583:1984 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of bismuth.
NF A06-584:1984 Chemical analysis of aluminium and aluminium alloys. Spectrophotometric determination of berrylium.
NF A06-606:1984 Chemical analysis of magnesium and magnesium alloys. Spectrophotometric determination of iron.
NF T20-002:1966 Standard plan for methods of chemical analysis by flame emission spectrophotometry.
NF A06-323:1987 Chemical analysis of steels. Determination of nitrogen content. Molecular absorption spectrophotometric method.
NF A06-089:1966 Chemical analysis of manganese ores. Spectrophotometric and volumetric determination of chromium.
NF A06-804:1968 Chemical analysis of zinc and its alloys. Spectrophotometric determination of cadmium.
NF A06-313:1987 Chemical analysis of steel and cast iron. Determination of titanium content. Spectrophotometric method.
NF A10-304:1986 Chemical analysis of silico-manganese. Determination of phosphorus content. Spectrophotometric method.
NF A06-374*NF EN ISO 13900:2002 Steel - Determination of boron content - Curcumin spectrophotometric method after distillation
NF A06-800:1968 Chemical analysis of zinc and its alloys. Spectrophotometric determination of copper (cuprazon method).
NF T20-253:1968 Chemical analysis of hydrochloric, nitric and sulphuric acids. Spectrophotometric determination of iron.
NF A06-390*NF EN ISO 10714:2002 Steel and iron - Determination of phosphorus content - Phosphovanadomolybdate spectrophotometric method.
NF A20-420*NF ISO 3886:1987 Iron ores. Determination of manganese content. Periodate spectrophotometric method.
NF A20-427:1985 Iron ores. Determination of copper content. 2,2'-biquinolyl spectrophotometric method.
NF A06-320*NF EN 10178:1989 Chemical analysis of ferrous materials. Determination of niobium in steels. Spectrophotometric method.
NF A06-356:1992 Chemical analysis of ferrous materials. Determination of bore in steel. Spectrophotometric method.
NF A06-088:1966 Chemical analysis of manganese ores. Spectrophotometric and gravimetric determination of nickel.
NF A06-371:1984 Chemical analysis of steel. Molecular absorption spectrophotometric determination of zirconium (after separation by extraction).
NF A08-331*NF EN ISO 10700:1995 Steel and iron. Determination of manganese content. Flame atomic absorption spectrophotometric method.
NF A06-347:1986 Chemical analysis of steel and cast iron. Determination of tin. Molecular absorption spectrophotometric method.
NF A06-337:1983 Chemical analysis of steel and cast iron. Determination of molydbenum content. Molecular absorption spectrophotometric method.
NF A06-311:1987 Chemical analysis of steel and cast iron. Determination of cobalt content. Molecular absorption spectrophotometric method.
NF A06-345:1987 Chemical analysis of steel and cast iron. Determination of vanadium content. Molecular absorption spectrophotometric method.
NF A06-308:1985 Chemical analysis of steel and cast iron. Determination of nickel content. Molecular absorption spectrophotometric method.
NF A06-407:1975 Chemical analysis of lead. Spectrophotometric determination of arsenic.
NF A20-415:1984 Iron ores. Determination of silicon content. Reduced molybdosilicate spectrophotometric method.
NF A22-410:1986 Manganese ores. Determination of arsenic content. Spectrophotometric and volumetric determinations.
NF A06-328:1987 Steel and cast iron. Determination of chromium content. Diphenylcarbazide spectrophotometric method.
NF T20-355:1978 Potassium chloride for industrial use. Determination of sodium content.flame emission spectrophotometric method).
NF X43-013:1977 Atmospheric pollution.determination of the concentration by mass ofsulphur dioxide, in the ambient air.analysis by the thorin spectrophotometric method.
NF A06-352*NF EN 10212:1995 Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method.
NF A06-373*NF EN 10179:1989 Chemical analysis of ferrous materials. Determination of nitrogen (trace amounts) in steels. Spectrophotometric method.
NF A20-424*NF ISO 4691:1986 Iron ores. Determination of titanium content. Diantipyrylmethane spectrophotometric method.
NF EN ISO 8598-1:2014 Optique et instruments d'optique - Frontofocomètres - Partie 1 : instruments pour cas généraux
NF A06-841-4*NF EN 12441-4:2003 Zinc and zinc alloys - Chemical analysis - Part 4 : determination of iron in zinc alloys - Spectrophotometric method
NF A11-101:1983 Chemical analysis of ferroniobium. Determination of niobium content gravimetric method. Determination of tantalum content. Spectrophotometric method.
NF EN IEC 62471-7:2023 Sécurité photobiologique des lampes et des appareils utilisant des lampes - Partie 7 : sources de lumière et luminaires qui émettent principalement un rayonnement visible
NF A06-341-2*NF EN ISO 4829-2:2016 Steel - Determination of total silicon content - Reduced molybdosilicate spectrophotometric method - Part 2 : silicon contents between 0,01% and 0,05 %
NF EN ISO 9342-2:2006 Optique et instruments d'optique - Verres étalons pour l'étalonnage des frontofocomètres - Partie 2 : verres étalons pour frontofocomètres utilisés pour le mesurage des lentilles de contact
NF A06-341-2:1990 Steel and cast iron. Determination of total silicon content. Reduced molybdosilicate spectrophotometric method. Part 2 : silicon contents between 0,01 and 0,05 per cent.
NF A22-405*NF ISO 7990:1986 Manganese ores and concentrates. Determination of total iron content. Titrimetric method after reduction and sulfosalicylic acid spectrophotometric method.
NF C42-710:1988 Photometers. Determination of metrological characteristics, classification according to the latter, calibration, check of the main characteristics liable to vary with time.
NF C74-350/A11*NF EN 60601-2-50/A11:2012 Medical electrical equipment - Part 2-50 : particular requirements for the basic safety and essential performance of infant phototherapy equipment
NF A06-341-1*NF EN ISO 4829-1:2018 Steelsand cast iron - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 1 : silicon contents between 0,05 % and 1,0 %
NF A06-341-1:1990 Steel and cast iron. Determination of total silicon content. Reduced molybdosilicate spectrophotometric method. Part 1 : silicon contents between 0,05 and 1,0 per cent.
NF EN 62788-1-4:2017 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 1-4 : Encapsulants - Mesurage du facteur de transmission optique et calcul du facteur de transmission photonique à pondération solaire, de l'indice de jaunisse...
NF C57-105-1-1*NF EN IEC 61215-1-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1 : special requirements for testing of crystalline silicon photovoltaic (PV) modules
NF C57-105-1-1*NF EN 61215-1-1:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1 : special requirements for testing of crystalline silicon photovoltaic (PV) Modules
NF C57-788-1-4*NF EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules - Part 1 -4 : Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
NF EN 16584-3:2017 Applications ferroviaires - Conception destinée à l'usage par les PMR - Exigences générales - Partie 3 : caractéristiques optiques et de friction
NF G06-030:1973 Textiles. Tests of fibres. Method of determining the quantity of cysteic acid contained in hydrolysates of wool by electrophoresis on paper and spectrophotometry.
NF EN 61215-1-3:2017 Modules photovoltaïques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 1-3 : exigences particulières d'essai des modules photovoltaïques (PV) au silicium amorphe à couches minces
NF EN IEC 61215-1-1:2021 Modules photovoltaïques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 1-1 : exigences particulières d'essai des modules photovoltaïques (PV) au silicium cristallin
NF EN IEC 61215-1-3:2021 Modules photovoltaïques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 1-3 : exigences particulières d'essai des modules photovoltaïques (PV) au silicium amorphe à couches minces
NF C57-788-1-4/A1*NF EN 62788-1-4/A1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4 : encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
NF C57-105-1-3*NF EN 61215-1-3:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3 : special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
NF EN 61215-1-2:2017 Modules photovoltaïques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 1-2 : exigences particulières d'essai des modules photovoltaïques (PV) au tellurure de cadmium (CdTe) à couches minces
NF EN IEC 61215-1-2/A1:2022 Modules photovoltaïques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 1-2 : exigences particulières d'essai des modules photovoltaïques (PV) au tellurure de cadmium (CdTe) à couches minces
NF EN IEC 61215-1-2:2021 Modules photovoltaïques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 1-2 : exigences particulières d'essai des modules photovoltaïques (PV) au tellurure de cadmium (CdTe) à couches minces
NF EN IEC 60335-2-113/A11:2023 Appareils électrodomestiques et analogues - Sécurité - Partie 2-113 : exigences particulières pour les appareils destinés aux soins cosmétiques et esthétiques comportant des lasers et des sources de lumière de forte intensité
NF EN IEC 60335-2-113:2023 Appareils électrodomestiques et analogues - Sécurité - Partie 2-113 : exigences particulières pour les appareils destinés aux soins cosmétiques et esthétiques comportant des lasers et des sources de lumière de forte intensité
NF C42-711:1989 Luminance meters. Determination of metrological characteristics, classification according to the latter, calibration, check of the main characteristics liable to vary with time.
NF R10-025-1:1996 Road vehicles. Measurement of the opacity of exhaust gas from compression ignition (diesel) engines. Part 1 : standard (reference) opacimeter.
NF C57-105-1-2*NF EN 61215-1-2:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
NF C57-105-1-3*NF EN IEC 61215-1-3:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3 : special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
NF C57-105-1-2*NF EN IEC 61215-1-2:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2 : special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules

Indonesia Standards, The main spectrophotometer

SNI 13-4119-1996 Determination of phosphorus in ash from coal using spectrophotometer
SNI 06-7129-2005 Test methods of chromium (IV) content in leather by spectrophotometers
SNI 13-6590-2001 The determination for arsenic content in minerals by spectrophotometric
SNI 19-7119.1-2005 Ambient atmospheres - Part 1: Test methods of ammonia (NH3) content by indophenols using spectrophometers
SNI 13-6180-1999 Procedure for optimization of flame Atomic Absorption Spectrophotometer (AAS)
SNI 13-6345-2000 Determination of trace elements in coal and coke ash by atomic absorpsion spectrophotometer
SNI 19-7117.19-2009
SNI 06-6989.30-2005 Water and wastewater - Part 30: Test methods of ammonia content with spectrophotometers by phenates
SNI 06-6989.35-2005 Water and waste water - Part 35: Test methods of dissolved aluminium (Al) content by spectrophotometers with eriochrome cyanine R
SNI 6989.66-2009
SNI 6989.65-2009
SNI 7117.18-2009
SNI 19-7117.6-2005 Exhaust gas emissions - Stationary sources - Part 6: Test methods of ammonia (NH3) content by indophenol methods using spectrophotometers
SNI 6989.67-2009
SNI 06-6989.31-2005 Water and waste water - Part 31: Test methods of phosphate content by spectrophotometers with acid ascorbic
SNI 19-6670-2002 Determination of heavy metal content in solid waste by lithium metaborate fusion in an atomic absorption spectrophotometers (AAS)
SNI 03-4151-1996 Test methods for phosphate content in light sediment by hydrogen chloride using spectrophotometer apparatus in ammonium molybdat manuver
SNI 19-7117.5-2005 Exhaust gas emissions - Stationary sources - Part 5: Test methods of nitrogen oxides by phenol dissulphonic acid (PDS) using spectrophotometers
SNI 19-7117.3.1-2005 Exhaust gas emissions - Stationary sources - Part 3: Sulphur oxides (SOx) - Section 1: Turbidimetry test methods using spectrophotometers
SNI 19-7119.5-2005 Ambient atmospheres - Part 5: Test methods of index sulphates content by PbO2 candle media and turbidimetry using spectrophotometers
SNI 7854-2013 Metode pengujian kadar logam tembaga (Cu), seng (Zn), besi (Fe) dalam daging, telur, susu, dan olahannya dengan menggunakan Spektrofotometer Serapan Atom (SSA)
SNI 19-7117.8-2005 Exhaust gas emissions - Stationary sources - Part 8: Test methods of hydrogen chloride (HCl) content by mercury thiocyanate using spectrophotometers
SNI 06-6989.51-2005 Water and waste water - Part 51: Test methods of anionic surfactant content with spectrophotometers by methylene blue
SNI 7853-2013 Metode pengujian kadar logam berat timbal (Pb) dan kadmium (Cd) dalam daging, telur, susu, dan olahannya dengan menggunakan Spektrofotometer Serapan Atom (SSA)

RO-ASRO, The main spectrophotometer

STAS SR ISO 1232:1995 Aluminium oxide primarily used for the production of aluminium -Determination of silica content - Reduced molybdosilicate spectrophotometric method
STAS SR ISO 805:1995 Aluminium oxide primarily used for the production of aluminium -Determination of iron content - 1,10 - Phenanthroline photometric rnethod
STAS SR ISO 900:1996 Aluminium oxide primarily used for the production of aluminium -Determination of titanium content - Diantipyrylmethane photometric method

British Standards Institution (BSI), The main spectrophotometer

PD ISO/TS 23031:2020 Graphic technology. Assessment and validation of the performance of spectrocolorimeters and spectrodensitometers
20/30394351 DC BS ISO 23946. Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for optical properties of ceramic phosphors for white light emitting diodes using a Gonio-spectrofluorometer
BS ISO 23946:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test methods for optical properties of ceramic phosphors for white light-emitting diodes using a gonio-spectrofluorometer
BS ISO 21501-3:2019 Determination of particle size distribution. Single particle light interaction methods - Light extinction liquid-borne particle counter
22/30454072 DC BS EN 17871. Glass in building. Spectrophotometric characteristics of glass products. Validation procedure for calculation tool
21/30441328 DC BS EN IEC 62471-7. Photobiological safety of lamps and lamp systems - Part 7. Light sources and luminaires primarily emitting visible radiation
BS ISO 21501-2:2019 Determination of particle size distribution. Single particle light interaction methods - Light scattering liquid-borne particle counter
BS ISO 16063-11:1999 Methods for the calibration of vibration and shock transducers - Primary vibration calibration by laser interferometry
BS ISO 16063-11:2001 Methods for the calibration of vibration and shock transducers - Primary vibration calibration by laser interferometry
BS 7020 Sec.5.2:1993 Analysis of iron ores. Methods for the determination of silicon content. Reduced molybdosilicate spectrophotometric method
22/30406184 DC BS EN ISO 9342-1. Optics and optical instruments. Test lenses for calibration of focimeters - Part 1. Reference lenses for focimeters used for measuring spectacle lenses
19/30385918 DC BS ISO 21501-3. Determination of particle size distribution. Single particle light interaction methods. Part 3. Light extinction liquid-borne particle counter
BS ISO 21501-4:2018+A1:2023 Determination of particle size distribution. Single particle light interaction methods - Light scattering airborne particle counter for clean spaces
19/30385915 DC BS ISO 21501-2. Determination of particle size distribution. Single particle light interaction methods. Part 2. Light scattering liquid-borne particle counter
BS PD ISO/TS 18621-21:2020 Graphic technology. Image quality evaluation methods for printed matter. Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
BS ISO 17714:2007 Meteorology. Air temperature measurements. Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
PD IEC TR 61547-1:2020 Equipment for general lighting purposes. EMC immunity requirements. Objective light flickermeter and voltage fluctuation immunity test method
PD ISO/TS 18621-21:2023 Graphic technology. Image quality evaluation methods for printed matter. Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers
PD IEC/TR 62627-03-01:2011 Fibre optic interconnecting devices and passive components. Reliability. Design of an acceptance test for fibre pistoning failure of connectors during temperature and humidity cycling. Demarcation analysis
21/30419440 DC BS ISO 21501-4 AMD1. Determination of particle size distribution. Single particle light interaction methods. Part 4. Light scattering airborne particle counter for clean spaces
BS 7442 Sec.4.2:1994 Rubber or plastics covered rollers. Requirements. Classification by surface finish
BS ISO 20903:2011 Surface chemical analysis. Auger electron spectroscopy and X-ray photoelectron spectroscopy. Methods used to determine peak intensities and information required when reporting results
BS ISO 16740:2005 Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide
BS ISO 24585-2:2023 Graphic technology. Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application. Requirements for decorative surfaces
BS EN IEC 61215-1-3:2021 Terrestrial photovoltaic (PV) modules. Design qualification and type approval. Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules

RU-GOST R, The main spectrophotometer

GOST R 53466-2009 Optics and optical equipment. Medical thermographs. General technical requirements. Methods of measuring the major parameters
GOST 20903-1975 The rectangular fused silica cells for the spectrophotometers. Basic dimensions. Technical requirements
GOST 32984-2014 Solid mineral fuel. Determination of major and minor elements in ash by X-ray fluorescence spectrometric method
GOST R 8.657-2009 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure
GOST 8.229-2013 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Verification procedure
GOST 8.229-1981 State system for ensuring the uniformity of measurements. Infrared spectrophotometers. Methods and means of verification
GOST 33092-2014 Petroleum products. Test method for color by the automatic tristimulus spectrophotometer
GOST 23116.0-1983 Cadmium of high purity. General requirements for methods of spectral analysis
GOST 27173-1986 Detector sets of ionizing radiations for spectrometry. General technical specification
GOST R 54730-2011 Food common salt. Measurement (determination) of potassium-ion mass fraction by flame-photometric method
GOST R 57080-2016 Medical electrical equipment. H-Ray Bone Densitometer (Absorptiometer). Technical requirements for governmental purchases

American Society for Testing and Materials (ASTM), The main spectrophotometer

ASTM E2729-09 Standard Practice for Rectification of Spectrophotometric Bandpass Differences
ASTM E388-04(2009) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ^,
ASTM E958-93(2005) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E1866-97(2021) Standard Guide for Establishing Spectrophotometer Performance Tests
ASTM E388-04 Standard Test Method for Wavelength Accuracy of Spectral Bandwidth Fluorescence Spectrometers
ASTM E388-72(1998) Standard Test Method for Spectral Bandwidth and Wavelength Accuracy of Fluorescence Spectrometers
ASTM E2175-01(2021) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E2867-14(2019) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM D6122-99 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
ASTM D6122-01 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
ASTM D6122-09 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM E2056-04 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E958-93(1999) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E925-83(1994)e1 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E2175-01 Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E2175-01(2008) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM E2175-01(2013) Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
ASTM D4085-93(1997) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM UOP262-99 Phenols and Thiophenols in Petroleum Products by Spectrophotometry
ASTM D6122-06 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM D6122-06e1 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
ASTM D1685-00 Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry
ASTM D1685-05 Standard Test Method for Traces of Thiophene in Benzene by Spectrophotometry
ASTM D4085-93(2003) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM E925-09(2022) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
ASTM E2222-02 Standard Practice for Host Computer Communication with Spectrometers for Color Measurements
ASTM E2222-02(2007) Standard Practice for Host Computer Communication with Spectrometers for Color Measurements
ASTM E2867-14(2023) Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
ASTM D4085-93(2021) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM D4085-93(2008) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM E1164-12 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D4085-93(2013) Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM E2056-00 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E387-84(1995)e1 Standard Test Method for Estimating Stray Radiant Power Ratio of Spectrophotometers by the Opaque Filter Method
ASTM E387-04 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E387-04(2009) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E925-09(2014) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
ASTM E275-08 Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM E2056-04(2010) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E2056-04(2016) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E275-08(2022) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM E387-04(2022) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E387-04(2014) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method
ASTM E275-08(2013) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
ASTM UOP549-81 Sodium in Petroleum Distillates by Flame Emission, Using an Atomic Absorption Spectrophotometer
ASTM E2108-10 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
ASTM E158-86(1996)e1 Standard Practice for Fundamental Calculations to Convert Intensities into Concentrations in Optical Emission Spectrochemical Analysis (Withdrawn 2004)
ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
ASTM D6756-10 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
ASTM D4326-01 Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence
ASTM D4326-97 Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence
ASTM D4326-04 Standard Test Method for Major and Minor Elements in Coal and Coke Ash By X-Ray Fluorescence
ASTM D7058-19 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM D7058-04(2014) Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
ASTM D6122-10 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-13 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-15 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM G138-03 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM G138-06 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
ASTM D3124-98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
ASTM D6756-02 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D6756-10(2015) Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM D7757-12 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D6756-09 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D6756-17 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM C715-90(2006) Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM C715-90(2011)e1 Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis
ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
ASTM D8496-23 Standard Test Method for Determination of Hydroquinone (HQ) Content in Vinyl Acetate Monomer (VAM) Using Ultraviolet-Visible (UV-Vis) Spectrophotometer
ASTM D6748-22 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
ASTM D6748-02a(2012) Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)
ASTM D6748-02a(2007) Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

IN-BIS, The main spectrophotometer

Yunnan Provincial Standard of the People's Republic of China, The main spectrophotometer

DB53/T 355-2011 Determination of Lead and Cadmium in Cigarette Mainstream Smoke by Atomic Absorption Spectrophotometry
DB53/T 498-2013 Determination of main chemical constituents of tobacco and tobacco products Near-infrared diffuse reflectance spectrometry

Professional Standard - Non-ferrous Metal, The main spectrophotometer

YS/T 739-2010 Determination of cryolite rate and main components of electrolyte-X-ray fluorescence spectrometric analysis method

PL-PKN, The main spectrophotometer

PN C04052-1965 Petroleum produc?s Spectrophofomeiric determination of aroma?ic hydrocarbons in gasoline
PN-EN 62788-1-4-2017-02/A1-2021-07 E Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength

Illuminating Engineering Society of North America, The main spectrophotometer

IESNA LM-78-2007 Method for Total Luminous Flux Measurement of Lamps Using an Integrating Sphere Photometer

Group Standards of the People's Republic of China, The main spectrophotometer

T/GXAF 0013-2023 Complex fertilizers—Determination of Alginate Oligosaccharides—Spectrophotometry
T/GDCKCJH 052-2021 Performance requirements and test method for optoelectronic integrated test instrument with integrating sphere
T/GZTPA 0005-2020 Determination of the main chemical constituents in Guizhou green tea by Near-infrared diffuse reflectance spectroscopy

Japanese Industrial Standards Committee (JISC), The main spectrophotometer

JIS M 8215-2:2006 Iron ores -- Determination of manganese content -- Periodate spectrophotometric method
JIS K 0145:2002 Surface chemical analysis -- X-ray photoelectron spectrometers -- Calibration of energy scales
JIS K 0400-67-20:1998 Water quality -- Determination of selenium -- Atomic absorption spectrometric method (hydride technique)
JIS B 9623:2002 Graphic technology -- Process control -- Optical, geometrical and metrological requirements for reflection densitometers for graphic arts use
JIS K 0148:2005 Surface chemical analysis -- Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy

国家质量监督检验检疫总局, The main spectrophotometer

SN/T 4675.24-2016 Spectrophotometric method for determination of Forintschock index of export wines

European Committee for Standardization (CEN), The main spectrophotometer

EN 14937-1:2006 Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method
EN ISO 9342-1:2023 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2023)
FprEN ISO 9342-1 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Reference lenses for focimeters used for measuring spectacle lenses (ISO/FDIS 9342-1:2023)
EN ISO 9337-1:2000 Contact Lenses - Determination of Back Vertex Power - Part 1: Method Using Focimeter with Manual Focusing ISO 9337-1:1999

Professional Standard - Agriculture, The main spectrophotometer

NY/T 1373-2007 Determination of Sulfite in Edible Fungus Distill under Nitrogen with the Method of Spectrophotometer
水产品质量安全检验手册 1.2.4.2-2005 Chapter 1 General introduction Section 2 Analytical methods for aquatic product inspection 4. Physical and chemical analysis methods (2) Atomic absorption spectrophotometer method

International Electrotechnical Commission (IEC), The main spectrophotometer

IEC 62471-7:2023 Photobiological safety of lamps and lamp systems - Part 7: Light sources and luminaires primarily emitting visible radiation
IEC TR 61282-14:2016 Fibre optic communication system design guides - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants
IEC TR 61282-14:2019 RLV Fibre optic communication system design guides - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants
IEC TR 61282-14:2019 Fibre optic communication system design guides - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants
IEC TR 61282-10:2013 Fibre optic communication system design guides - Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude
IEC TR 62627-04:2012 Fibre optic interconnecting devices and passive components - Part 04: Example of uncertainty calculation: Measurement of the attenuation of an optical connector
IEC 61215-1-1:2021 RLV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
IEC 61215-1-1:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
IEC 61215-1-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
IEC 62788-1-4:2016/AMD1:2020 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC 62788-1-4:2016+AMD1:2020 CSV Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness
IEC TR 61282-10:2013/COR1:2013 Fibre optic communication system design guides - Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude
IEC TR 61547-1:2020 Equipment for general lighting purposes - EMC immunity requirements - Part 1: Objective light flickermeter and voltage fluctuation immunity test method
IEC TR 61547-1:2020 RLV Equipment for general lighting purposes - EMC immunity requirements - Part 1: Objective light flickermeter and voltage fluctuation immunity test method
IEC 61215-1-3:2022 Amendment 1 - Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
IEC 61215-1-3:2021 RLV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
IEC 61215-1-3:2021+AMD1:2022 CSV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
IEC 61215-1-3:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
IEC 61215-1-2:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
IEC 61215-1-3:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
IEC 61215-1-2:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
IEC 61215-1-2:2022 Amendment 1 - Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV)
IEC 61215-1-2:2021+AMD1:2022 CSV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
IEC 61215-1-2:2021 RLV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules

ES-UNE, The main spectrophotometer

UNE-EN IEC 62471-7:2023 Photobiological safety of lamps and lamp systems - Part 7: Light sources and luminaires primarily emitting visible radiation (Endorsed by Asociación Española de Normalización in May of 2023.)
IEC 62471-7:2023/COR1:2023 Corrigendum 1 - Photobiological safety of lamps and lamp systems - Part 7: Light sources and luminaires primarily emitting visible radiation
UNE-EN IEC 62471-7:2023/AC:2023-07:2023 Photobiological safety of lamps and lamp systems - Part 7: Light sources and luminaires primarily emitting visible radiation (Endorsed by Asociación Española de Normalización in August of 2023.)
UNE-EN 61215-1-1:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
UNE-EN IEC 61215-1-1:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
ISO 24585-2:2023 Graphic technology — Multispectral imaging measurement and colorimetric computation for graphic arts and industrial application — Part 2: Requirements for decorative surfaces
UNE-EN IEC 61215-1-3:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
UNE-EN IEC 61215-1-3:2022/A1:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
UNE-EN 62788-1-4:2017 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
UNE-EN 62788-1-4:2017/A1:2021 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
UNE-EN IEC 61215-1-2:2022/A1:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
UNE-EN IEC 61215-1-2:2022 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules

European Committee for Electrotechnical Standardization（CENELEC）, The main spectrophotometer

EN IEC 62471-7:2023/AC:2023-07:2023 Photobiological safety of lamps and lamp systems - Part 7: Light sources and luminaires primarily emitting visible radiation
EN IEC 62471-7:2023 Photobiological safety of lamps and lamp systems - Part 7: Light sources and luminaires primarily emitting visible radiation
EN 60601-2-50:2009 Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment (Incorporates Amendment A11: 2011)
EN IEC 61215-1-1:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
EN 61215-1-1:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) Modules
EN 62788-1-4:2016 Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
EN IEC 61215-1-3:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
EN 61215-1-3:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
EN 61215-1-2:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules
EN IEC 61215-1-2:2021 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The main spectrophotometer

GB/T 9468-2008 General requirements for the photometry and goniophotometry of luminaries
GB/T 25968-2010 Test methods of solar transmittance and solar absorptance of materials by spectrophotometer
GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
GB/T 14634.2-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 2:Determination of emission dominantpeak and chromaticity
GB/T 23649-2009 Graphic technology.Process control.Optical,geometrical and metrological requirements for reflection densitometers for graphic arts use

AT-ON, The main spectrophotometer

ONORM M 6610-2000 Water analysis - Photometric determination of dissolved silicate

ES-AENOR, The main spectrophotometer

UNE 36-317 Pt.2-1989

未注明发布机构, The main spectrophotometer

BS EN ISO 9342-1:2023 Optics and optical instruments — Test lenses for calibration of focimeters Part 1 : Reference lenses for focimeters used for measuring spectacle lenses

Danish Standards Foundation, The main spectrophotometer

DS/EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses
DS/EN ISO 9342-2:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses
DS/EN 15063-2:2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method
DS/ISO 21501-4:2007 Determination of particle size distribution - Single particle light interaction methods - Part 4: Light scattering airborne particle counter for clean spaces
DS/IEC/TR 61282-10:2013 Fibre optic communication system design guides - Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude
DS/EN 62788-1-4:2020 Measurement procedures for materials used in photovoltaic modules – Part 1-4: Encapsulants – Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength
DS/EN IEC 61215-1-3:2021 Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
DS/EN IEC 61215-1-4:2021 Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1-4: Special requirements for testing of thin-film Cu(In,GA)(S,Se)₂ based photovoltaic (PV) modules
DS/EN IEC 61215-1-2:2021 Terrestrial photovoltaic (PV) modules – Design qualification and type approval – Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules

ZA-SANS, The main spectrophotometer

NRS 052-2-1-1999 Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 1: Test procedures for photovoltaic modules
SANS 408:2007 Coal and coke - Analysis and testing - Higher rank coal ash and coke ash - Major and minor elements - Wavelength dispersive X-ray fluorescence spectrometric method
SANS 16063-11:2008 Methods for the calibration of vibration and shock transducers Part 11: Primary vibration calibration by laser interferometry
NRS 052-2-5-1999 Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 5: Test procedures for luminaires
NRS 052-2-3-1999 Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 3: Test procedures for regulators
NRS 052-2-4-1999 Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 4: Test procedures for inverters
NRS 052-2-2-1999 Photovoltaic systems for use in individual homes Part 2: Test procedures for main components Section 2: Test procedures for batteries
SANS 414:2006 Coal and coke - Analysis and testing - Higher rank coal ash and coke ash - Major and minor elements - Acid digestion/flame atomic absorption spectrometric method

Lithuanian Standards Office , The main spectrophotometer

LST EN 15063-2-2007 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method
LST EN ISO 9342-1:2005 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005)
LST EN ISO 9342-2:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005)

AENOR, The main spectrophotometer

UNE-EN 15063-2:2008 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method
UNE-EN ISO 9342-1:2006 Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005)
UNE-EN ISO 9342-2:2007 Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005)
UNE-EN 61215-1-3:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules
UNE-EN 61215-1-2:2017 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules

GOSTR, The main spectrophotometer

GOST R 56980.1-2020 Photovoltaic modules. Design qualification for technical requirements. Part 1. Test requirements
GOST R 58648.2-2019 Photovoltaic module. Performance testing and energy rating. Part 2. Determination of spectral sensitivity, characteristics dependence on the incidence angle and coefficients for calculating the operating temperature

Professional Standard - Commodity Inspection, The main spectrophotometer

SN/T 1599-2005 Determination of Main Components in Coal Ash by Inductively Coupled Plasma-Atomic Emission Spectrometry

Professional Standard - Energy, The main spectrophotometer

NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, The main spectrophotometer

SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

Professional Standard - Medicine, The main spectrophotometer

YY/T 1807-2022 Rapid non-destructive testing of main components in metal materials for dental restorations Hand-held X-ray fluorescence spectrometer method (semi-quantitative method)

Underwriters Laboratories (UL), The main spectrophotometer

UL 61730-2 CRD-2022 UL Standard for safety Photovoltaic (PV) Module Safety Qualification – Part 2: Requirements for Testing - Section / Paragraph Reference: 10.17, 10.17DV DR Subject: Requirements for PV fire types 41-49, UL 61730-2
UL 8750 CRD-2011 UL Standard for Safety Light Emitting Diode (LED) Equipment for Use in Lighting Products - Section / Paragraph Reference: Supplement SA (NEW) Subject: Supplemental Requirements For Light-emitting-diode Packages (Edition 1: November 17@ 2009)

BELST, The main spectrophotometer

STB 8058-2017 System for ensuring uniformity of measurements of the Republic of Belarus. Ultraviolet-visible-nearinfrared spectrophotometers. Methods of verification

KR-KS, The main spectrophotometer

KS B ISO 16063-13-2018 Methods for the calibration of vibration and shock transducers — Part 13: Primary shock calibration using laser interferometry

National Association of Corrosion Engineers (NACE), The main spectrophotometer

NACE RP0178-2003 Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to Be Lined for Immersion Service

Defense Logistics Agency, The main spectrophotometer

DLA MIL-STD-1678-1 CHANGE 1-2011 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (Part 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS) (PART 1 OF 5 PARTS)
DLA MIL-STD-1678-1 B-2013 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (Part 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS) (PART 1 OF 6 PARTS)