ZH
RU
ES

Mechanical strength

Mechanical strength, Total:245 items.

In the international standard classification, Mechanical strength involves: Fuels, Agricultural machines, implements and equipment, Cases. Boxes. Crates, Construction materials, Fibre optic communications, Paper and board, Transformers. Reactors, Wood, sawlogs and sawn timber, Road engineering, Electrical wires and cables, Non-metalliferous minerals, Headgear. Clothing accessories. Fastening of clothing, Components for electrical equipment, Resistors, Insulating materials, Metalliferous minerals, Bottles. Pots. Jars, Electrical accessories, Industrial automation systems, Ceramics, Rubber and plastics products, Aerospace electric equipment and systems, Coals, Road vehicle systems, Insulating fluids, Passenger cars. Caravans and light trailers, Pipeline components and pipelines, Iron and steel products, Commercial vehicles, Furniture, Road vehicles in general, Products of the chemical industry, On-board equipment and instruments, Electromechanical components for electronic and telecommunications equipment.

CZ-CSN, Mechanical strength

CSN 34 1070 Cast.18-1972 Mechanical strength test of cords
CSN 44 1327-1988 Bituminous coke. Determination of mechanical strength according micum test
CSN 66 8223-1975 Testiag of tlie mechanical strengtb of electric detonators
CSN 44 1328-1970 Drum Test for Mechanical Strength of Coke (Irsid)
CSN 65 4812-1969 Determination of size and mechanical strength of granules in fertilizers
CSN 35 8071 Cast.13-1988 Variable resistors. Testing method of mechanical strength of operating shaft

Society of Automotive Engineers (SAE), Mechanical strength

SAE TS372-1-1990 TS372 Mechanical Strength of Rear Accessories

RU-GOST R, Mechanical strength

GOST 21289-1975 Coal briquettes. Methods for the determination of mechanical strength
GOST ISO 6534-1995 Gasoline chain saws. Hand-guards. Mechanical strength
GOST 26838-1986 Wooden boxes and roof boardings. Standards of mechanical strength
GOST 13525.6-1968 Paper and board. Method for determination of reducing mechanical strenght under heating
GOST R 55014-2012 Power transformers. Tests for mechanical strength of tanks
GOST 15634.2-1970 Magnet wire. Method of the insulation abrasion test
GOST 18132-1972 Peat briquetts and semibriquetts. Method for determination of mechanical strength
GOST 19609.22-1989 Concentrated kaolin. Method for determination of mechanical flexural strength
GOST 27647-1988 Veriable resistors. Test method of mechanical strength of lead screw
GOST 14340.10-1969 Enamelled round winding wires. Method of the insulation abrasion test
GOST 19575-1984 Iron ores, agglomerates and pellets. Method for determination of reduction strength
GOST 21284-1993 Bentonite clay for fine and building ceramics. Method for the determination of mechanical bending strength
GOST 15490-1970 Brown coals, hard coals, anthracite and thermoanthracite. Methods for determination of mechanical strength
GOST 21284-1975 Bentonite clay for fine and building ceramics. Method for the determination of mechanical strength in dry state during flexure
GOST R 50219-1992 Bentonite clay for fine and building ceramics. Method for the determination of mechanical strength
GOST 20784-1975 Manganese ore concentrates and agglomerates. Methods of sampling and sample preparation for mechanical strength determination
GOST R ISO 7641-1-1993 Road vehicles. Caravans and light trailers. Calculation of the mechanical strength of the steel drawbar

GOSTR, Mechanical strength

GOST 21289-2018 Coal briquettes. Methods for determination of mechanical strength
GOST EN 527-3-2016 Office furniture. Work tables and desks. Part 3. Methods of test for the determination of the stability and the mechanical strength of the structure

Professional Standard - Forestry, Mechanical strength

LY/T 1166-1995 Chainsaw hand guard mechanical strength
LY/T 1166-2011 Forestry machinery.Portable chain-saw hand-guards.Mechanical strength
LY/T 1166-2015 Forestry Machinery Portable Chainsaw Hand Guard Mechanical Strength
LY/T 1578-2000 Portable chain-saws.Chain catcher.Dimensions and mechanical strength

BE-NBN, Mechanical strength

NBN 813-04-1969

YU-JUS, Mechanical strength

JUS N.A5.042-1979 Compliance of resistance against mechanical strength. Tumbting barrel
JUS B.H8.379-1982 Solid mineral fuels. Coal briguettes. Determination of mechanical strength on metallic plate
JUS N.A5.041-1987 Verification mechanical strength resistance ageinst impact. Impact-test apparatus
JUS B.H8.376-1982 Solid mineral fuels. Coal briguettes. Methods for the determination of mechanical strength
JUS N.A5.044-1988 Verification mechanical strength resistance against inpact. Sprlng-operate? impact-te?t apparatvs

Association Francaise de Normalisation, Mechanical strength

NF U34-116:1993 Portable chain-saws. Hand-guards. Mechanical strength.
NF U34-116*NF ISO 6534:2011 Forestry machinery - Portable chain-saw hand-guards - Mechanical strength
NF P98-534:1991 ROAD TRAFFIC SIGNS. SP TYPE TRAFFIC SIGNS. MECHANICAL RESISTANT TEST.
NF U34-111*NF ISO 10726:2020 Portable chain-saws - Chain catcher - Dimensions and mechanical strength
NF G91-103:1990 Fermetures auto-agrippantes - Caractéristiques de résistance mécanique - Méthodes d'essai.
NF EN IEC 61631:2020 Méthode d'essai pour la résistance mécanique des noyaux en oxydes magnétiques
NF U34-111:1994 Portable chain-saws. Chain catcher. Dimensions and mechanical strength.
NF H35-078:2016 Bottling industry - Glass bottles for carbonated beverages - Mechanical strength
NF T76-309-4*NF EN 17333-4:2020 Characterisation of one component foam - Part 4 : mechanical strength
NF C93-633*NF EN IEC 61631:2020 Test method for the mechanical strength of cores made of magnetic oxides
NF U34-116/A1*NF ISO 6534/A1:2013 Forestry machinery - Portable chain-saw hand-guards - Mechanical strength - Amendment 1
NF C93-352*NF EN 61631:2005 Test method for the mechanical strength of cores made of magnetic oxides
NF EN 16014:2011 Quincaillerie d'ameublement - Résistance mécanique et endurance des mécanismes de verrouillage
NF EN 16337:2013 Quincaillerie d'ameublement - Résistance mécanique et capacité de charge des supports d'étagère
NF M03-046:1983 Solid mineral fuelscoke (greater than 20 mm size). Determination of mechanical strength.
NF H35-078:2007 Bottling industry - Glass bottles - Containers for carbonated beverages - Mechanical strength requirements.
NF P21-359:1995 Structural timber. Grading. Requirements for machine strength graded timber and grading machines.
NF EN ISO 17831-1:2016 Biocombustibles solides - Détermination de la résistance mécanique des granulés et des briquettes - Partie 1 : granulés
NF EN 17869:2023 Quincaillerie d'ameublement - Méthodes d'essai pour détermination de la résistance mécanique et rigidité de ferrures d'assemblage de corps de meuble
NF R41-115-1:1989 Road vehicles. Caravans and light trailers. Calculation of the mechanical strength of the drawbar. Part 1 : steel drawbars.
NF EN 1915-2/IN1:2010 Matériels au sol pour aéronefs - Exigences générales - Partie 2 : exigences de stabilité et de résistance mécanique, calculs et méthodes d'essai
NF EN 1915-2+A1:2010 Matériels au sol pour aéronefs - Exigences générales - Partie 2 : exigences de stabilité et de résistance mécanique, calculs et méthodes d'essai
NF D62-044-3:2003 Office funiture - Works tables and desks - Part 3 : methodds of test for the determination of the stability and the mechanical strengh of the structure.
NF L54-002-420*NF EN 2591-420:2006 Aerospace series - Elements of electrical and optical connection - Test methods - Part 420 : mechanical strength of rear accessories
NF EN 2591-420:2006 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 420 : tenue mécanique des accessoires arrière
NF EN 12516-4/IN1:2018 Robinetterie industrielle - Résistance mécanique des enveloppes - Partie 4 : méthode de calcul relative aux enveloppes d'appareils de robinetterie en matériaux métalliques autres que l'acier
NF EN 12516-4+A1:2018 Robinetterie industrielle - Résistance mécanique des enveloppes - Partie 4 : méthode de calcul relative aux enveloppes d'appareils de robinetterie en matériaux métalliques autres que l'acier
NF EN 15828:2010 Quincaillerie d'ameublement - Résistance mécanique et endurance des charnières et de leurs composants - Compas et charnières pivotant sur un axe horizontal
NF C93-400-7-2*NF EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2 : impact Tests (free connectors)- Test 7b : mechanical strength impact
NF T70-763-7*NF EN 13763-7:2004 Explosives for civil uses - Detonators and relays - Part 7 : determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Mechanical strength

GB/T 2006-2008 Method for determination of mechanical strength of coke
GB/T 2006-1994 Coke for metallurgy--Determination of mechanical strength
GB/T 25988-2010 Road vehicles.Towing vehicle coupling device to tow caravans or light trailers.Mechanical strength test
GB/T 24186-2009 High strength abrasion resistant steel plates for construction machine

SE-SIS, Mechanical strength

SIS SS-ISO 6534:1992 Portable chain-saws — Hand-guards — Mechanical strength
SIS SS-ISO 10 726:1992 Portable chain-saws — Chain catcher — Dimensions and mechanical strength
SIS SS 18 71 80-1990 Biofuels and peat — Determination of mechanical strength for pellets
SIS SMS 2508-1974 Refrigerators and freezers for household use. Testing of mechanical strength of shelves
SIS SS 18 71 75-1990 Peat — Determination of mechanical strength of sod peat

RO-ASRO, Mechanical strength

STAS SR ISO 6534:1996 Portable chain-saws - Hand-guards - Mechanical strength
STAS 5156-1974 CEMENTS Detemination of mechanical strengths on plastic mortars
STAS 8823-1980 Transport pallets METAL BOX-PALLETS Determination of mechanical strengths
STAS 5118/14-1975 Packages DETERMINATION OF THE INFLUENCE OF HIGH AND LOW TEMPERATURES UPON PHYSICAL AND, MECHANICAL STRENGTHS
STAS 9265-1973 PIT COAL COKE AND BROWN COAL Determination of mechanical strength in drumby IRSID method
STAS 1275-1988 Tests of concretes TESTS OF HARDENED CONCRETE Determination of mechanical strengthes
STAS SR 13184-1994 Uniform specification for the homologation of high capacity road vehicles for passengers service, as regarding mechanical strength of superstructure
STAS 10208-1975 ICE-HOCKEY STICKS Test ol strength to mechanical stresses
SR 7182-3-1994 Furniture. Tables. Assessment of strength to mechanical loads
SR 7182-7-1994 Furniture. Beds. Assessment of strength to mechanical loads

International Organization for Standardization (ISO), Mechanical strength

ISO 6534:1992 Portable chain-saws; hand-guards; mechanical strength
ISO 6534:2007 Forestry machinery - Portable chain-saw hand-guards - Mechanical strength
ISO 6534:2023 Forestry machinery — Portable chain-saw hand-guards — Mechanical strength
ISO 13912:2005 Structural timber - Machine strength grading - Basic principles
ISO 13912:2017 Structural timber - Machine strength grading - Basic principles
ISO 556:1980 Coke (greater than 20 mm in size); Determination of mechanical strength
ISO 556:2020 Coke (greater than 20 mm in size) — Determination of mechanical strength
ISO 10726:2020 Portable chain-saws — Chain catcher — Dimensions and mechanical strength
ISO 6534:2007/Amd 1:2012 Forestry machinery - Portable chain-saw hand-guards - Mechanical strength; Amendment 1
ISO 10726:1992 Portable chain-saws; chain catcher; dimensions and mechanical strength
ISO 7641:2012 Road vehicles - Trailers up to 3,5 t - Calculation of the mechanical strength of steel drawbars
ISO 3853:1994 Road vehicles - Towing vehicle coupling device to tow caravans or light trailers - Mechanical strength test
ISO 7641-1:1983 Road vehicles; Caravans and light trailers; Calculation of the mechanical strength of the drawbar; Part 1 : Steel drawbars

British Standards Institution (BSI), Mechanical strength

BS EN 17333-4:2020 Characterisation of one component foam - Mechanical strength
BS ISO 6534:2007+A1:2012 Forestry machinery. Portable chain-saw hand-guards. Mechanical strength
BS ISO 6534:2023 Forestry machinery. Portable chain-saw hand-guards. Mechanical strength
BS ISO 10726:2020 Portable chain-saws. Chain catcher. Dimensions and mechanical strength
22/30446416 DC BS ISO 6534. Forestry machinery. Portable chain-saw hand-guards. Mechanical strength
BS EN IEC 61631:2020 Test method for the mechanical strength of cores made of magnetic oxides
BS ISO 556:2020 Coke (greater than 20 mm in size). Determination of mechanical strength
BS EN 61631:2001 Test method for the mechanical strength of cores made of magnetic oxides
19/30365456 DC BS ISO 556. Coke (greater than 20 mm in size). Determination of mechanical strength
19/30394521 DC BS EN IEC 61631. Test method for the mechanical strength of cores made of magnetic oxides
18/30372473 DC BS EN 17333-4. Characterization of One Component Foam (OCF). Part 4. Mechanical strength
BS EN 2591-420:2006 Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories
BS ISO 7641:2012 Road vehicles. Trailers up to 3,5 t. Calculation of the mechanical strength of steel drawbars
BS EN 12256:1998 Plastic piping systems - Thermoplastic fittings - Test method for mechanical strength or flexibility of fabricated fittings
BS AU 210-1:1987 Drawbars for caravans and light trailers - Method of calculation for the mechanical strength of steel drawbars
BS EN 527-3:2003 Office furniture - Work tables and desks - Methods of test for the determination of the stability and the mechanical strength of the structure
BS EN 13763-7:2003 Explosives for civil uses - Detonators and relays - Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures
17/30345395 DC BS ISO 2100-420. Aerospace elements of electrical and optical connection. Test methods. Part 420. Mechanical strength of rear accessories
BS EN 60512-16-20:1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Mechanical tests on contacts and terminations. Test 16t. Mechanical strength (wired termination of solderless connections)

Korean Agency for Technology and Standards (KATS), Mechanical strength

KS B ISO 6534:2018 Forestry machinery — Portable chain-saw hand-guards — Mechanical strength
KS B ISO 6534:2014 Forestry machinery — Portable chain-saw hand-guards — Mechanical strength
KS B ISO 6534:2005 Portable chain-saw-Hand-guards-Mechanical strength
KS C IEC 61631-2006(2021) Test method for the mechanical strength of cores made of magnetic oxides
KS C 2001-1998 Test method of thermal life evaluation of solid electrical insulating materials by mechanical strength
KS C IEC 61631:2006 Test method for the mechanical strength of cores made of magnetic oxides
KS C IEC 61631-2006(2016) Test method for the mechanical strength of cores made of magnetic oxides
KS B 6961-2021 Test methods for mechanical strength of service robots —Part 1: Load test
KS B 6961-2007 Test methods for mechanical strength of service robots-Part 1:Load test
KS B 6961-2016 Test methods for mechanical strength of service robots－Part 1：Load test
KS B 6962-2016 Test methods for mechanical strength of service robots－Part 2：Drop and torsion test
KS B 6962-2021 Test methods for mechanical strength of service robots —Part 2: Drop and torsion tests
KS C 2001-1998(2018)
KS B 6962-2007 Test methods for mechanical strength of service robots-Part 2:Drop and torsion test
KS R 4083-1-2016 Road vehicles ? Caravans and light trailers ? Calculationof the mechanical strength of the drawbar ? Part 1 : Steel drawbars
KS R ISO 3853-2017(2022) Road vehicles－Towing vehicle coupling device to tow caravans or light trailers－Mechanical strength test
KS R 4083-1-2001 Road vehicles ? Caravans and light trailers ? Calculationof the mechanical strength of the drawbar ? Part 1 : Steel drawbars
KS R 4083-1-2001(2011) Road vehicles?Caravans and light trailers?Calculationof the mechanical strength of the drawbar?Part 1 : Steel drawbars
KS R ISO 3853:2017 Road vehicles－Towing vehicle coupling device to tow caravans or light trailers－Mechanical strength test

KR-KS, Mechanical strength

KS B ISO 6534-2018 Forestry machinery — Portable chain-saw hand-guards — Mechanical strength
KS B ISO 6534-2018(2023) Forestry machinery — Portable chain-saw hand-guards — Mechanical strength
KS R ISO 3853-2017 Road vehicles－Towing vehicle coupling device to tow caravans or light trailers－Mechanical strength test

American National Standards Institute （ANSI), Mechanical strength

ANSI/EIA/TIA 455-185:1991 Strength of Coupling Mechanism Fiber Optic Interconnecting Devices
ANSI/TIA/EIA 455-185-1991 Strength of Coupling Mechanism Fiber Optic Interconnecting Devices

BELST, Mechanical strength

STB 2504-2017 Peat fuel briquettes. Method for determination of mechanical strength

VN-TCVN, Mechanical strength

TCVN 5226-1990 Coke ( greater than 20mm ).Determination of mechanical strength

AENOR, Mechanical strength

UNE 32018:2012 Coke. Determination of mechanical strength. MICUM e IRSID Index.
UNE 80116:1986 TEST METHODS OF CEMENTS. PHYSICAL ANALYSIS. MECHANICAL STRENGTH DETERMINATION OF QUICKLY-SETTING NATURAL CEMENTS
UNE 26249:1998 ROAD VEHICLES. TOWING VEHICLE COUPLING DEVICE TO TOW CARAVANS OR LIGHT TRAILERS. MECHANICAL STRENGTH TEST.
UNE-EN 12256:1999 PLASTICS PIPING SYSTEMS - THERMOPLASTICS FITTINGS - TEST METHOD FOR MECHANICAL STRENGTH OR FLEXIBILITY OF FABRICATED FITTINGS
UNE 26483-1:1999 ROAD VEHICLES. CARAVANS AND LIGHT TRAILERS. CALCULATION OF THE MECHANICAL STRENGTH OF THE DRAWBAR. PART 1: STEEL DRAWBARS.
UNE-EN 13763-7:2004 Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures

未注明发布机构, Mechanical strength

DIN EN IEC 61631:2022 Test method for determining the mechanical strength of (IEC 61631:2020)
BS EN 519:1995(1998) Structural timber — Grading — Requirements for machine strength graded timber and grading machines
BS AU 210-1:1987(2000) Drawbars for caravans and light trailers — Part 1 : Method for calculation of the mechanical strength of steel drawbars

ZA-SANS, Mechanical strength

SANS 520:2007 Coke (greater than 20 mm in size) - Determination of mechanical strength

German Institute for Standardization, Mechanical strength

DIN 51717:2016-04 Testing of solid fuels - Determination of mechanical strength of coke
DIN EN 17333-4:2020 Characterisation of one component foam - Part 4: Mechanical strength
DIN EN 17333-4:2020-07 Characterisation of one component foam - Part 4: Mechanical strength; German version EN 17333-4:2020
DIN EN 61631:2002 Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2001); German version EN 61631:2001
DIN EN IEC 61631:2022-12 Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2020); German version EN IEC 61631:2020 / Note: DIN EN 61631 (2002-08) remains valid alongside this standard until 2023-06-11.
DIN EN 12256:1998 Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings; German version EN 12256:1998
DIN EN 2591-420:2007 Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories; German and English version EN 2591-420:2006
DIN EN 527-3:2003 Office furniture - Work tables and desks - Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure; German version EN 527-3:2003
DIN EN 2591-420:2007-11 Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories; German and English version EN 2591-420:2006 / Note: Applies in conjunction with DIN EN 2591-100 (2006-08).
DIN EN 13763-7:2004-02 Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures; German version EN 13763-7:2003 / Note: To be replaced by DIN EN 13763-7 (2021-06).
DIN EN 13763-7:2004 Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures; German version EN 13763-7:2003

ES-UNE, Mechanical strength

UNE-EN IEC 61631:2020 Test method for the mechanical strength of cores made of magnetic oxides (Endorsed by Asociación Española de Normalización in August of 2020.)
UNE-EN 17333-4:2020 Characterisation of one component foam - Part 4: Mechanical strength
UNE-EN 2591-420:2006 Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories (Endorsed by AENOR in January of 2007.)
UNE-EN 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact (Endorsed by AENOR in April of 2012.)

Taiwan Provincial Standard of the People's Republic of China, Mechanical strength

CNS 11120-1984 Method of Test for Mechanical Strength of Coke (Greater Than 20 mm in Size)

ES-AENOR, Mechanical strength

International Electrotechnical Commission (IEC), Mechanical strength

IEC 61631:2020 Test method for the mechanical strength of cores made of magnetic oxides
IEC 61631:2020 RLV Test method for the mechanical strength of cores made of magnetic oxides
IEC 61631:2001 Test method for the mechanical strength of cores made of magnetic oxides
IEC 60512-7-2:2011 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact

Danish Standards Foundation, Mechanical strength

DS/EN 61631:2002 Test method for the mechanical strength of cores made of magnetic oxides
DS/EN 2591-420:2006 Aerospace series – Elements of electrical and optical connection – Test methods – Part 420: Mechanical strength of rear accessories
DS/EN 12256:1998 Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
DS/EN 527-3:2003 Office furniture - Work tables and desks - Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure
DS/EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
DS/EN 13763-7:2004 Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures

European Committee for Electrotechnical Standardization（CENELEC）, Mechanical strength

EN IEC 61631:2020 Test method for the mechanical strength of cores made of magnetic oxides
EN 61631:2001 Test Method for the Mechanical Strength of Cores Made of Magnetic Oxides
EN 60512-7-2:2012 Connectors for electronic equipment - Tests and measurements Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact

CEN - European Committee for Standardization, Mechanical strength

PREN 17333-4-2018 Characterization of One Component Foam (OCF) - Part 4: Mechanical strength

Lithuanian Standards Office , Mechanical strength

LST EN 61631-2002 Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2001)
LST EN 12256-2002 Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
LST EN 2591-420-2006 Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories
LST EN 527-3-2003 Office furniture - Work tables and desks - Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure
LST EN 13763-7-2004 Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures

PL-PKN, Mechanical strength

PN-EN IEC 61631-2021-02 E Test method for the mechanical strength of cores made of magnetic oxides (IEC 61631:2020)
PN E06313-1988 Selection of insulators for overhead lines and substations regarding mechanical strength
PN E06300-15-1990 Electrical appliances for household use and similar purposes General requirements and tests procedures Mechanical strength

Electronic Components, Assemblies and Materials Association, Mechanical strength

ECA EIA-364-98-1997 TP-98 Housing Locking Mechanism Strength Test Procedure for Electrical Connectors

FI-SFS, Mechanical strength

NORDEST NT FIRE 020-1985 SMALL CHIMNEYS:HEAT INSULATION, TIGHTNESS AND MECHANICAL STRENGTH AT ELEVATED TEMPERATURES

Professional Standard - Machinery, Mechanical strength

JB/T 8133.13-1999 Test method for physical-chemical properties of electrical carbon product.Mechanical strength of carbon pile
JB/T 8133.13-2013 Test method for physical-chemical properties of electrical carbon product.Part 13:Mechanical strength of carbon plie

PT-IPQ, Mechanical strength

NP 2827-2.29-1991 Basic environmental testing procedures Part 2: Tests Test Eb and guidance:Bump
NP 2827-2.37-1991 Basic environmental testing procedures Part 2: Tests Test Fdc: Random vibration wide band. Reproductibility low
NP 2827-2.35-1991 Basic environmental testing procedures Part 2: Tests Test Fdc: Random vibration wide band. Reproductibility high
NP 2827-2.36-1991 Basic environmental testing procedures Part 2: Tests Test Fdc: Random vibration wide band. Reproductibility médium
NP EN 12256-2000 Plastics piping systems Thermoplastics fittings Test method for mechanical strength or flexibility of fabricated fittings

European Committee for Standardization (CEN), Mechanical strength

prEN 519-1991 Structural timber; grading; requirements for machine strength, graded timber and grading machines
EN 12256:1998 Plastics piping systems - Thermoplastics fittings - Test method for mechanical strength or flexibility of fabricated fittings
EN 527-3:2003 Office furniture - Work tables and desks - Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure
EN 2591-420:2006 Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories
EN 2591-420:2001 Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 420: Mechanical Strength of Rear Accessories
EN 13763-7:2003 Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures

VE-FONDONORMA, Mechanical strength

Group Standards of the People's Republic of China, Mechanical strength

T/SZAS 5-2018 Power lithium-ion battery application—Biaxial stretched separator Part2：Mechanical strength
T/SZAS 2-2018 Power lithium-ion battery application—Uniaxial stretched separator Part2：Mechanical strength
T/SSEA 0041-2019 High-strength wear-resistant steel plate for mining machinery

Professional Standard - Ferrous Metallurgy, Mechanical strength

YB/T 4547-2016 The technical specification of online automatic sampling, sample preparation, particle size analysis and the determination of mechanical strength for coke

工业和信息化部, Mechanical strength

YB/T 4849-2020 Technical specifications for online automatic sampling, sample preparation, particle size analysis and mechanical strength determination of pellets

IT-UNI, Mechanical strength

UNI 6130-1972

Professional Standard - Commodity Inspection, Mechanical strength

SN/T 1797.9-2008 Technical regulation on safety and sanitation for inspection of iron ore-Part 9:Mechanical strength for quality evaluation

Japanese Industrial Standards Committee (JISC), Mechanical strength

JIS T 0330-2:2012 Bioceramics -- Part 2: Testing method for mechanical strength of porous calcium phosphate bioceramics
JIS C 5402-7-2:2019 Connectors for electronic equipment -- Tests and measurements -- Part 7-2: Impact tests (free connectors) -- Test 7b: Mechanical strength impact

American Society for Testing and Materials (ASTM), Mechanical strength

ASTM A1108-17 Standard Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams

Aerospace, Security and Defence Industries Association of Europe (ASD), Mechanical strength

ASD-STAN PREN 2591-420-2005 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 420: Michanical Strength of Rear Accessories (Edition P 1)
ASD-STAN PREN 2591-D20-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D20 - Mechanical Strength of Rear Accessories (Issue P 1)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Mechanical strength

PREN 2591-420-2005 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 420: Michanical Strength of Rear Accessories (Edition P 1)
PREN 2591-D20-1992 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part D20 - Mechanical Strength of Rear Accessories (Issue P 1)