ZH
RU
ES
Carbon Calibration Curve
Carbon Calibration Curve, Total:117 items.
In the international standard classification, Carbon Calibration Curve involves: Nuclear energy engineering, Quality, Noise with respect to human beings, Radiocommunications, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Analytical chemistry, Radiation measurements, Electromagnetic compatibility (EMC), Metrology and measurement in general, Test conditions and procedures in general, Telecommunications in general, Environmental testing, Electrical engineering in general, Vibrations, shock and vibration measurements, Measurement of fluid flow, Semiconducting materials, Optics and optical measurements, Road vehicles in general, TEXTILE AND LEATHER TECHNOLOGY, Diagnostic, maintenance and test equipment, Reinforced plastics, Power transmission and distribution networks, Linear and angular measurements, Fluid power systems, Non-destructive testing, Testing of metals, Flexible drives and transmissions, Edible oils and fats. Oilseeds, Paint coating processes.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Carbon Calibration Curve
- GB/T 15247-2008 Microbeam analysis.Electron probe microanalysis.Guidelines for determining the carbon content of steels using calibration curve method
- GB/T 15247-1994 Electron probe quantitative analysis method of carbon in carbon steel and low alloy steel--Sensitivity curve method (detection limit method)
- GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration
- GB/T 25185-2010 Surface chemical analysis.X-ray photoelectron spectroscopy.Reporting of methods used for charge control and charge correction
ESDU - Engineering Sciences Data Unit, Carbon Calibration Curve
- ESDU 83044-1983 Plasticity correction factors for plate buckling.
- ESDU 83044-2014 Plasticity correction factors for plate buckling
- ESDU 76014 B-1993 Estimation of endurance and construction of constant amplitude SN curves from related data corrected for notch and mean stress effects.
- ESDU 76014 B-2013 Estimation of endurance and construction of constant amplitude S – N curves from related data corrected for notch and mean stress effects
- AERO W.01.01.05 E-2007 Slope of lift curve for two-dimensional flow. (Incorporates Amendments A@ B@ C@ D@ and E)
BE-NBN, Carbon Calibration Curve
- NBN-ISO 226:1992 Acoustics. Normal equal-loudness level contours
- NBN-EN 28318-1993 Packaging. Complete, filled transport packages. Vibration tests using a sinusoidal variable frequency (ISO 8318: 1986)
Group Standards of the People's Republic of China, Carbon Calibration Curve
- T/CIRA 27-2021 Germanium (68Ge) linear calibration source
- T/SXCAA 012-2021 Guidelines for Quality Control of Linear Calibration Curves
- T/CAICI 35-2022 Specification of Propagation Models Calibration for Wireless Network
- T/IAWBS 016-2022 X-ray double crystal rocking curve FWHM test method for silicon carbide single wafer
- T/CASAS 014-2021 Measuring method for basal plane bending of SiC substrate — High resolution X-ray diffractometry
RU-GOST R, Carbon Calibration Curve
- GOST R ISO 226-2009 Acoustics-Normal equal-loudness-level contours
- GOST R ISO 11095-2007 Statistical methods. Linear calibration using reference materials
- GOST R 57917-2017 Polymer composites. Determination of dynamic viscosity of thermosetting resins by the sinusoidal method
- GOST R 55234.1-2012 Practical aspects of management of risk. Injury risk curves for evaluation of occupant protection in frontal impact
Professional Standard - Electron, Carbon Calibration Curve
- SJ/T 31035-1994 Requirements of readiness and methods of inspection and assessment for bend dressing machines
Korean Agency for Technology and Standards (KATS), Carbon Calibration Curve
- KS A 4916-1994 Reference sources for the calibration of surface contamination monitors
- KS D ISO 16592:2011 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
- KS D ISO 16592-2011(2016) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
- KS D ISO 16592-2011(2021) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
- KS A 4922-2005 Calibration phantom for X- and γ -ray personal dosimeters
- KS B ISO TR 9209:2003 Measurement of liquid flow in open channels-Determination of the wetline correction
- KS B ISO TR 9209:2015 Measurement of liquid flow in open channels－Determination of the wetline correction
- KS B ISO 7066-2:2014 Assessment of uncertainty in the calibration and use of flow measurement devices — Part 2: Non-linear calibration relationships
- KS B ISO 7066-2:2004 Assessment of uncertainty in the calibration and use of flow measurement devices-Part2:Non-linear calibration relationships
- KS R ISO 7861:2008 Road vehicles－Injury risk curves for evaluation of occupant protection in frontal impact
- KS R ISO 7861-2023 Injury risk curves for road vehicle assessment of passenger protection against frontal impacts
- KS B ISO TR 7066-1:2004 Assessment of uncertainty in calibration and use of flow measurement devices-Part 1:Linear calibration relationships
- KS B ISO TR 7066-1:2015 Assessment of uncertainty in calibration and use of flow measurement devices－Part 1：Linear calibration relationships
- KS R ISO 7861-2008(2018) Road vehicles－Injury risk curves for evaluation of occupant protection in frontal impact
- KS D ISO 15472:2003 Surface chemical analysis-X-ray photoelectron spectrometers-Calibration of energy scales
- KS D ISO 19318-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
- KS D ISO 19318:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
British Standards Institution (BSI), Carbon Calibration Curve
- BS DD ISO/TS 28037:2011 Determination and use of straight-line calibration functions
- BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
- BS ISO 22581:2021 Surface chemical analysis. Near real-time information from the X-ray photoelectron spectroscopy survey scan. Rules for identification of, and correction for, surface contamination by carbon-containing compounds
- BS 4484-1:1969 Specification for measuring instruments for constructional works - Metric graduation and figuring of instruments for linear measurement
- BS ISO 19318:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
- BS 2011 Pt.2.2Z/AFc & Z/BFc:1986 Environmental testing. Guidance. Tests Z/AFc and Z/BFc. Guidance on combined temperature (cold and dry heat) and vibration (sinusoidal) tests
Institute of Electrical and Electronics Engineers (IEEE), Carbon Calibration Curve
- IEEE 1459-2010 Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions
- IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions
- IEEE/ANSI N42.28-2002 American National Standard Calibration of Germanium Detectors for In-Situ Gamma-Ray Measurements
- IEEE Std 643-2004/COR 1-2013 IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
- IEEE P643-2004/Cor1/D3, August 2013 IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
- IEEE Std 643-2004/Cor 1-2013 (Corrigendum to IEEE Std 643-2004) IEEE Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
- IEEE N42.14-1999 Calibration and use of germanium spectrometers for the measurement of gammma-ray emission rates of radionuclides
- IEEE N42.14-1990 Calibration and use of germanium spectrometers for the measurement of gammma-ray emission rates of radionuclides
- IEEE 1309/COR-1998 Calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz; Corrections
- IEEE 643/COR 1-2013 Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
- IEEE Std 1138-2009/Cor 1-2014 (Corrigendum to IEEE Std 1138-2009) IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) Use on Electric Utility Power Lines -- Corrigendum 1: Stress-Strain Temperature Correction, Aeolian Vibration Velocity
International Organization for Standardization (ISO), Carbon Calibration Curve
- ISO 16592:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
- ISO 16592:2012 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
- ISO 16063-12:2002 Methods for the calibration of vibration and shock transducers - Part 12: Primary vibration calibration by the reciprocity method
- ISO 16063-12:2002/Cor 1:2008 Methods for the calibration of vibration and shock transducers — Part 12: Primary vibration calibration by the reciprocity method — Technical Corrigendum 1
- ISO 10647:1996 Procedures for calibrating and determining the response of neutron-measuring devices used for radiation protection purposes
- ISO/TR 7861:2003 Road vehicles - Injury risk curves for evaluation of occupant protection in frontal impact
- ISO 22581:2021 Surface chemical analysis — Near real-time information from the X-ray photoelectron spectroscopy survey scan — Rules for identification of, and correction for, surface contamination by carbon-containi
- ISO/TR 10305-2:2003 Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz
- ISO 10519:2015/DAmd 1:2023 Rapeseed — Determination of chlorophyll content — Spectrometric method — Amendment 1: Preparation of the calibration curve to determine the k factor
- ISO 19318:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
- ISO 19318:2021 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
Association Francaise de Normalisation, Carbon Calibration Curve
- NF X21-007:2008 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steel using a calibration curve method.
- NF X10-107:1990 Assessment of uncertainty in the calibration and use of flow measurement devices. Part 1 : linear calibration relationships.
- X10-323:1990 Measurement of liquid flow in open channels. Determination of the wetline correction.
- NF ISO 11843-5/A1:2017 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire - Amendement 1
- NF X06-048-2*NF ISO 11843-2:2000 Capability of detection - Part 2 : methodology in the linear calibration case
- NF X06-048-5/A1*NF ISO 11843-5/A1:2017 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases - Amendment 1
- NF EN 60068-2-57:2013 Essais d'environnement - Partie 2-57 : essais - Essai Ff : vibrations - Méthode par accélérogrammes et sinusoïdes modulées
Society of Automotive Engineers (SAE), Carbon Calibration Curve
- SAE ARP958D-1999 Electromagnetic Interference Measurement Antennas; Standard Calibration Method
Japanese Industrial Standards Committee (JISC), Carbon Calibration Curve
- JIS Z 8461:2001 Linear calibration using reference materials
- JIS Z 4326:1983 Method of calibration for continuous environmental gamma-ray monitors
- JIS Z 4511:1991 Methods of calibration for exposure meters and dose-equivalent meters
- JIS B 9935:2001 Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation
- JIS B 1857-2 AMD 1:2022 Curvilinear toothed synchronous belt drive systems for general power transmission -- Part 2: Pulley (Amendment 1)
YU-JUS, Carbon Calibration Curve
- JUS U.M1.042-1987 Determination of ultrasonic pulse velocity and calibration curve
- JUS N.N6.180-1978 Radio Communications. Wired distribution sistems. Methods of measurements. RF signal to noise ratio. Correction factors.
Liaoning Provincial Standard of the People's Republic of China, Carbon Calibration Curve
- DB21/T 2104-2013 Calibration procedure for metal wire repeated bending test machine
Electronic Components, Assemblies and Materials Association, Carbon Calibration Curve
- ECA 242-1961 Definitions for Electromagnetic Delay Lines Correction Sheet - July 1961
IN-BIS, Carbon Calibration Curve
Standard Association of Australia （SAA）, Carbon Calibration Curve
American National Standards Institute （ANSI), Carbon Calibration Curve
- ANSI N42.25-1997 Calibration and Usage of Alpha/Beta Proportional Counters
- ANSI/IEEE 1309:2005 Standard for Calibration of Electromagnetic Field Sensors and Probes, Excluding Antennas, from 9 kHz to 40 GHz
German Institute for Standardization, Carbon Calibration Curve
- DIN ISO 16592:2015 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method (ISO 16592:2012)
- DIN 55912-2 Bb.2:1999 Pigments - Titanium dioxide pigments - Methods of analysis; establishing a calibration graph using the X-ray fluorescence analysis
- DIN EN ISO 7500-1 Bb.1:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of tension, compressio
- DIN EN ISO 7500-1 Beiblatt 1:2021 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system - Supplement 1: General for requirements, verification and calibration of ten
RO-ASRO, Carbon Calibration Curve
AGMA - American Gear Manufacturers Association, Carbon Calibration Curve
- P84FTM4-1984 Computer Aided Corrective Machine Settings for Manufacturing Bevel and Hypoid Gear Sets
- 218.01-1982 Standard for Rating the Pitting Resistance and Bending Strength of Spur and Helical Involute Gear Teeth
American Society for Testing and Materials (ASTM), Carbon Calibration Curve
- ASTM E1361-90(1999) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
- ASTM E1361-02(2021) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
- ASTM E1622-94(1999)e1 Standard Practice for Correction of Spectral Line Overlap in Wavelength-Dispersive X-Ray Spectrometry (Withdrawn 2006)
- ASTM E1361-02 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
- ASTM E1361-02(2007) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
- ASTM E1361-02(2014)e1 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis
- ASTM E2861-11 Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
Danish Standards Foundation, Carbon Calibration Curve
Hebei Provincial Standard of the People's Republic of China, Carbon Calibration Curve
- DB13/T 5387-2021 Technical Guidelines for Revision and Measurement of Reservoir Capacity Curve and Review and Correction of Eigenvalues
KR-KS, Carbon Calibration Curve
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Carbon Calibration Curve
- IEEE 643 CORR 1-2013 Guide for Power-Line Carrier Applications Corrigendum 1: Modal Analysis Power Equation Correction
- IEEE 1138 CORR 1-2014 Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines Corrigendum 1: Stress-Strain Temperature Correction@ Aeolian Vibration Velocity
TR-TSE, Carbon Calibration Curve
- TS 2090-1975 BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ALECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT TEST Fc:VIBRATION (SINUSOIDAL)
(U.S.) Telecommunications Industries Association , Carbon Calibration Curve
- TIA SP3696-2000 Accelerated Measurement of BER and Q-Factor in Digital Optical Transmission Systems Using the Sinusoidal Interference Method Comment Period Expires: July 26, 2000; TIA/EIA-526-8
PL-PKN, Carbon Calibration Curve
- PN E04606-03-1986 Basic environmental testing procedures Test Fe and ?uidance: Vibration (sinusoidal) [Translation of Publication IEC 68-2-6, (1982)]
- PN E88606-1989 Electrical relays Vibration, shock, bump and seismic tests on measuring relays and protection equipment Yibration tests (sinusoidal)
International Telecommunication Union (ITU), Carbon Calibration Curve
- ITU-R RAPPORT BT.2018 FRENCH-1998 STUDY OF THE SYSTEM C GHOST CANCELLING REFERENCE SIGNAL FOR THE EVALUATION AND CORRECTION OF LINEAR DISTORTION IN THE TELEVISION CHAIN
ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Carbon Calibration Curve
- RAPPORT BT.2018 FRENCH-1998 STUDY OF THE SYSTEM C GHOST CANCELLING REFERENCE SIGNAL FOR THE EVALUATION AND CORRECTION OF LINEAR DISTORTION IN THE TELEVISION CHAIN
Taiwan Provincial Standard of the People's Republic of China, Carbon Calibration Curve
- CNS 14306-4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface
- CNS 14306.4-1999 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates (Method for the calibration of ISO surface profile comparators and for the determination of surface