ZH
RU
ES

Polyether+

Polyether+, Total:452 items.

In the international standard classification, Polyether+ involves: Products of the chemical industry, Footwear, Inorganic chemicals, Organic chemicals, Plastics, Raw materials for rubber and plastics, Rubber and plastics products, Paint ingredients, Cellular materials, Insulating materials, Protection of and in buildings, Construction materials, Electrical wires and cables, Materials for aerospace construction, Medical equipment, Compressors and pneumatic machines, Road engineering, Reinforced plastics, Farming and forestry, Pipeline components and pipelines, Aerospace electric equipment and systems, Animal feeding stuffs, Test conditions and procedures in general, Textile fibres, Electrical accessories, Fuels, General methods of tests and analysis for food products, Internal combustion engines, Printed circuits and boards.


Group Standards of the People's Republic of China, Polyether+

GM Holden Ltd, Polyether+

工业和信息化部, Polyether+

BELST, Polyether+

GM Europe, Polyether+

Professional Standard - Chemical Industry, Polyether+

  • HG/T 4803-2015 Methallyl alcohol polyether
  • HG/T 4490-2013 Methyl butenol polyether
  • HG/T 4572-2014 Plastics.Di-hydroxyl polyether polyols
  • HG/T 4573-2014 Plastics.Hex-hydroxyl polyether polyols
  • HG/T 4395-2012 Blend polyol for rigid polyurethane cellular plastics used in solar water heaters
  • HG/T 4439-2012 Textile dyeing and finishing auxiliaries.Polyether block aminopolysiloxane emulsion
  • HG/T 2232-1991 Modified polyphenylene ether engineering plastics
  • HG/T 4960~4961-2016 Rigid polyurethane foam for insulation boards and polyurethane rigid foam combination polyether for refrigerators and freezers (2016)
  • HG/T 5281~5284-2017 Methyl-terminated allyl alcohol polyether, dispersant IW, leveling agent TAN and antistatic agent P (2017)
  • HG/T 5727～5730-2020 Acetyl-terminated allyl alcohol polyether, methallyl alcohol, glyceryl ether oleate and antistatic agent TM (2020)
  • HG/T 4998~4999-2016 Oleic acid ethoxylates and tristyrylphenol ethoxylates (2016)

Indonesia Standards, Polyether+

Society of Automotive Engineers (SAE), Polyether+

  • SAE AMS7254A-2006 Perfluoroether Elastomer
  • SAE AMS7254B-2014 Perfluoroether Elastomer
  • SAE AMS3568A-2001 Sheet, Polyether Urethane (EU) Elastomer Foam Shock Absorbing
  • SAE AMS3571A-1984 RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled
  • SAE AMS3571B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled
  • SAE AMS3725A-1984 Core, Polyurethane Foam (Polyether), Rigid, Cellular
  • SAE AMS3725-2011 CORE, POLYURETHANE FOAM (POLYETHER) Rigid, Cellular
  • SAE AMS3725B-2012 Core, Polyurethane Foam (Polyether), Rigid, Cellular
  • SAE AMS3571-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type
  • SAE AMS3568/3-1983 FOAM, POLYETHER URETHANE (EU) ELASTOMER, SHOCK ABSORBING 20 lb/cu ft (320 kg/m3) Density
  • SAE AMS3571/6B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 95 Durometer “A”
  • SAE AMS3571/4B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75 Durometer “A”
  • SAE AMS3571/2B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 55 Durometer “A”
  • SAE AMS3571/5B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 85 Durometer “A”
  • SAE AMS3571/1B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 45 Durometer “A”
  • SAE AMS3571/8B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer “D”
  • SAE AMS3571/9B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75 Durometer “D”
  • SAE AMS3571/3B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer “A”
  • SAE AMS3568/1-1983 FOAM, POLYETHER URETHANE (EU) ELASTOMER, SHOCK ABSORBING 5 lb/cu ft (72 kg/m3) Density
  • SAE AMS3568/2-1983 FOAM, POLYETHER URETHANE (EU) ELASTOMER, SHOCK ABSORBING 15 lb/cu ft (240 kg/m3) Density
  • SAE AMS3568/3A-2006 Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 20 Pounds/Cubic Foot (320 kg/m3) Density
  • SAE AMS3568/2A-2006 Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 15 Pounds/Cubic Foot (240 kg/m3) Density
  • SAE AMS3725/2-1984 CORE, POLYURETHANE FOAM (POLYETHER) 4.0 lb per cu ft (64 kg/m3) Density
  • SAE AMS3573C-2011 Resin, Polyurethane (EU), Casting, Polyether-Type, Flexible, Solid, Low-Temperature Resistant 80 to 90
  • SAE AMS3568B-2011 Sheet, Polyether Urethane (EU) Elastomer Foam, Shock Absorbing
  • SAE AMS3573-2011 RESIN, POLYURETHANE (EU), CASTING Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 - 90
  • SAE AMS3568/1A-2006 Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) Density
  • SAE AMS3571/8-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 65 "D"
  • SAE AMS3571/2-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 55 "A"
  • SAE AMS3571/6-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 95 "A"
  • SAE AMS3571/7-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 55 "D"
  • SAE AMS3571/3-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 65 "A"
  • SAE AMS3571/1-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 45 "A"
  • SAE AMS3571/9-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 75 "D"
  • SAE AMS3571/5-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 85 "A"
  • SAE AMS3571/4-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 75 "A"
  • SAE AMS3573B-2003 Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 to 90
  • SAE AMS3573A-2003 Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 to 90
  • SAE AMS3571C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled
  • SAE AMS3573B-1994 Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 to 90
  • SAE AS81914/11-2011 Tubing, Plastic, Lighweight, Zero Halogen, Extra Flexible, Convoluted, Helical, Close Convolution, Polyetheretherkeytone (PEEK)
  • SAE AS81914/11A-2012 Tubing, Plastic, Lighweight, Zero Halogen, Extra Flexible, Convoluted, Helical, Close Convolution, Polyetheretherkeytone (PEEK)
  • SAE AMS3725/1-1984 CORE, POLYURETHANE FOAM (POLYETHER) 2.0 lb per cu ft (32 kg/m3) Density
  • SAE AMS3725/1A-1993 (Noncurrent)Core, Polyurethane Foam (Polyether) 2.0 Pounds per Cubic Foot (32 kg/m3) Density
  • SAE AMS3725/2A-1993 (Noncurrent)Core, Polyurethane Foam (Polyether) 4.0 Pounds per Cubic Foot (64 kg/m3) Density
  • SAE AMS3571/2C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, Durometer A
  • SAE AMS3571/4C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 75 Durometer A
  • SAE AMS3571/1C-2011 Resin, Polyether Urethane (EU) Casting, Flexible, Solid, Unfilled, 45 Durometer A
  • SAE AMS3571/9C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 75 Durometer D
  • SAE AMS3571/3C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 65 Durometer A
  • SAE AMS3571/6C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 95 Durometer A
  • SAE AMS3571/5C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 85 Durometer A
  • SAE AMS3571/8C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 65 Durometer D
  • SAE AMS3571/7C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled, 55 Durometer D
  • SAE AMS3568/2B-2011 Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing, 15 lb/cu ft (240 kg/m<(hoch)3>) Density
  • SAE AMS3568/3B-2011 Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing, 20 lb/cu ft (320 kg/m<(hoch)3>) Density
  • SAE AMS3568/1B-2011 Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing, 5 lb/cu ft (80 kg/m<(hoch)3>) Density
  • SAE AMS3266-1994 SEALING COMPOUND, POLYTHIOETHER ELASTOMERICTwo PartElectrically Conductive
  • SAE AMS3266B-2022 Sealing Compound, Polythioether Elastomeric Two-Part Electrically Conductive

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Polyether+

GM North America, Polyether+

Association Francaise de Normalisation, Polyether+

  • NF T52-114:1985 Plastics. Basic materials for polyrethanes. Determination of the acid index of polyethers.
  • NF T52-115:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of water.
  • NF T52-111:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of the density.
  • NF T52-117:1985 Plastics. Base materials for polyurethanes. Polyethers. Determining of the cloud point.
  • NF T52-112:1985 Plastics. Basics materiels for polyurethanes. Polyethers. Determination of the hydroxyl value.
  • NF T52-100:1980 Plastics. Base materials for polyurethanes. Polyethers, polyesters, isocyanates. List of test methods. Summary standard.
  • NF T52-118:1985 Plastics. Basic materials for polyurethanes. Polyethers. Determining of the conventionnal pH value.
  • NF T52-116:1985 Plastics. Basic materials for polyurethanes. Polyethers. Determination of non saturation level.
  • NF T52-119:1985 Plastics. Base materials for polyurethanes. Polyethers. Determination the sodium and potassium content.
  • NF EN 4717:2022 Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de carbone continue par volume (PEEK-CF55) - Demi-produit - Spécification de matériau
  • NF T50-011-1*NF EN ISO 23153-1:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 1 : designation system and basis for specifications
  • NF EN 4718:2022 Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de verre continue par volume (PEEK-GF55) - Demi-produit - Spécification de matériau
  • NF ISO 15309:2014 Implants chirurgicaux - Calorimétrie par balayage différentiel des polyéthercétones, polymères et composés pour l'utilisation dans les dispositifs médicaux implantables
  • NF T50-011-2*NF EN ISO 23153-2:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
  • NF EN ISO 23153-2:2020 Plastiques - Matériaux à base de polyétheréthercétone (PEEK) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
  • NF EN ISO 23153-1:2020 Plastiques - Matériaux à base de polyétheréthercétone (PEEK) pour moulage et extrusion - Partie 1 : système de désignation et base de spécification
  • NF T52-151:1979 Plastics. Primary materials for polyurethanes. Polyesters, polyethers and isocyanates. Visual assessment of coloration in gardner units.
  • NF L18-001*NF EN 4717:2022 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification
  • NF L18-002*NF EN 4718:2022 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification
  • NF S94-179*NF ISO 15309:2014 Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
  • NF T50-010-1:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: designation system and basis for specifications
  • NF T50-010-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: preparation of test specimens and determination of properties
  • NF T50-010-1*NF EN ISO 20029-1:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1 : designation system and basis for specification

Japanese Industrial Standards Committee (JISC), Polyether+

ZA-SANS, Polyether+

Professional Standard - Machinery, Polyether+

  • JB/T 12420-2015 Polyetherether ketone moulding compounds for electrical purposes
  • JB/T 12419-2015 Polyphenylene sulfide moulding compounds for electrical purposes

Professional Standard - Aerospace, Polyether+

  • QJ 1316-1987 Technical conditions of polyether polyurethane casting glue
  • QJ 1301-1987 Production Manual of Polyether Polyurethane Casting Rubber Products
  • QJ 913.5-1985 Composite solid propellant (polyether system) pH value determination method
  • QJ 913.4-1985 Composite solid propellant (polyether system) - Method for determination of benzene extraction value
  • QJ 913.7-1985 Composite solid propellant (polyether system) Calcium carbonate content analysis method
  • QJ 913.6-1985 Composite solid propellant (polyether system) analysis method for ferric oxide content
  • QJ 913.3-1985 Composite solid propellant (polyether system) - Analysis method for copper chromite content

PL-PKN, Polyether+

  • PN C89052-01-1985 Polyethers for polyurethanes Test methods General regulations
  • PN C89052-02-1985 Polyethers for polyurethanes Test methods Determination of the acid value
  • PN C89052-03-1985 Polyethers for polyurethanes Test methods Determination of the hydroxyl value

SAE - SAE International, Polyether+

  • SAE AMS3725A-1993 Core@ Polyurethane Foam (Polyether) Rigid@ Cellular
  • SAE AMS3571/7A-1984 "Resin@ Polyether Urethane (EU) Casting Flexible@ Solid@ Unfilled 55 Durometer ""D"""
  • SAE AMS3725/1B-2016 Core@ Polyurethane Foam (Polyether) 2.0 Pounds per Cubic Foot (32 kg/m3) Density
  • SAE AMS3725/2B-2016 Core@ Polyurethane Foam (Polyether) 4.0 Pounds per Cubic Foot (64 kg/m3) Density
  • SAE AS81914/11B-2016 TUBING@ PLASTIC@ LIGHTWEIGHT@ ZERO HALOGEN@ EXTRA FLEXIBLE@ CONVOLUTED@ HELICAL@ CLOSE CONVOLUTION@ POLYETHERETHERKEYTONE (PEEK)
  • SAE AMS3266A-2017 Sealing Compound@ Polythioether Elastomeric Two-Part Electrically Conductive

GM Daewoo, Polyether+

国家质量监督检验检疫总局, Polyether+

  • SN/T 4357-2015 Qualitative analysis of imported and exported textile fibers: ceramic, basalt, polyphenylene sulfide and polyether ether ketone fibers

CZ-CSN, Polyether+

  • CSN 64 0353-1982 Polyurethane produets polyethers nd polyesters raw materials. etermination olacid number
  • CSN 64 0354-1982 Polyurethane products polyethers nd polyesters raw materials. Deter- ination of hydroxyl number
  • CSN 64 0352-1982 Polyurethane products polyethers raw materials. Determination of pH value
  • CSN 64 0351-1982 Polyurethane products polyethers raw materials. Determination of iodine number

RU-GOST R, Polyether+

  • GOST 27952-1988 Unsaturated polyester resins. Specifications
  • GOST 25240-1982 Polyestheres for polyurethanes. Method of iodin value determination
  • GOST 25241-1982 Polyethere for polyurethanes. Method of pH determination
  • GOST 25261-1982 Polyethers and polyesters for polyurethanes. Method of hydroxyl value determination
  • GOST 25210-1982 Polyethers and polyesters for polyurethanes. Method of acid value determinations
  • GOST 26194-1984 Resins for paint and varnish. Methods for determination of hydroxyl number of alkyd and polyester resins
  • GOST 34362.1-2017 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Part 1. Designation system

IE-NSAI, Polyether+

Korean Agency for Technology and Standards (KATS), Polyether+

GOSTR, Polyether+

American Society for Testing and Materials (ASTM), Polyether+

  • ASTM F2026-07 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-07a Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-07e1 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-08 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-12 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2820-12 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
  • ASTM F2820-12(2021)e1 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
  • ASTM F2026-23 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-02 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-16 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-14 Standard Specification for Polyetheretherketone 40;PEEK41; Polymers for Surgical Implant Applications
  • ASTM F2026-00 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-17 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM D5205-96 Standard Classification System for Polyetherimide (PEI) Materials
  • ASTM D5205-96(2003) Standard Classification System for Polyetherimide (PEI) Materials
  • ASTM D5205-10 Standard Classification System for Polyetherimide (PEI) Materials
  • ASTM D5205-16 Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials
  • ASTM F1876-98(2003)e1 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
  • ASTM F1876-98 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
  • ASTM D8033-16 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
  • ASTM D8033-22 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
  • ASTM F3333-20 Standard Specification for Chopped Carbon Fiber Reinforced (CFR) Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2778-09 Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
  • ASTM F1579-98 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
  • ASTM D4875-18 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
  • ASTM D4875-11 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
  • ASTM D7253-06(2011)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
  • ASTM D7253-16 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
  • ASTM D7253-22 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
  • ASTM F2026-10 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM D7293-19 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
  • ASTM D7293-12 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
  • ASTM D4273-23 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
  • ASTM D4273-11 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
  • ASTM F1579-02 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
  • ASTM D4273-18 Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of Polyether Polyols
  • ASTM D7293-06 Standard Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
  • ASTM D4875-05 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
  • ASTM D4875-99 Standard Test Methods of Polyurethane Raw Materials Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
  • ASTM F2778-09(2015) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
  • ASTM F2778-09(2020) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
  • ASTM D4273-05 Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of Polyether Polyols
  • ASTM D4273-99 Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of Polyether Polyols
  • ASTM D7253-06 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
  • ASTM D4349-10 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
  • ASTM D4349-22 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

Professional Standard - Medicine, Polyether+

  • YY/T 0660-2008 Standard specification for polyetheretherketone (PEEK) polymers for surgical implant applications

U.S. Military Regulations and Norms, Polyether+

工业和信息化部/国家能源局, Polyether+

  • JB/T 12952-2016 Polyetheretherketone (PEEK) valve discs for reciprocating piston compressors

YU-JUS, Polyether+

Military Standard of the People's Republic of China-General Armament Department, Polyether+

  • GJB 1582-1993 Specification for polyether-based polyurethane rubber-coated nylon fabrics for military use
  • GJB 3584-1999 Specification for modified polyphenylene ether plastics
  • GJB 8134-2013 Specification for 3,3-bis (azidomethy) oxetane and tetrahydrofuran copolymer

Professional Standard - Building Materials, Polyether+

(U.S.) Ford Automotive Standards, Polyether+

  • FORD WSK-M4D592-A-2005 POLYETHERSULFONE (PES), SE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESW-M2D234-A-2004 POLYURETHANE MOLDING COMPOUND, MODIFIED- POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESW-M2D234-C-2004 POLYURETHANE MOLDING COMPOUND, MODIFIED- POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D844-A8-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPOUND
  • FORD WSB-M4D844-A11-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPUND
  • FORD ESW-M2D234-A-2010 POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESW-M2D234-C-2010 POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D436-A3-1987 POLYETHERIMIDE (PEI), 30% GLASS FIBER REINFORCED, INJECTION MOLDING COMPOUND
  • FORD ESE-M99G133-A2-2006 SOUND ABSORBER, OPEN CELL, POLYETHER POLYURETHAN FOAM **TO BE USED WITH FORD WSS-M99P1111-A**
  • FORD WSK-M4D844-A9-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), IMPACT RESISTANT MOLDING COMPOUND
  • FORD ESB-M6J128-A2-2008 PRIMER SURFACER, POLYETHER POLYURETHANE- ETHYLENE PROPYLENE DIENE RUBBER (EPDM) ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D838-A-2006 POLYETHERETHERKETONE (PEEK), SELF-EXTINGUISHING (SE) MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A **
  • FORD WSK-M4D716-A-2005 POLYETHERIMIDE (PEI) MOLDING COMPOUND, SELF-EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M2D234-D-2004 POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESW-M2D234-C
  • FORD ESW-M2D234-B-2004 POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESW-M2D234-A
  • FORD WSS-M2D243-A6-2014 POLYURETHANE (POLYETHER BASED) FOAM, FLAME BONDABLE, 24 - 26 kg/m3 density ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M2D234-D-2010 POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESW-M2D234-C)
  • FORD WSF-M4D736-A-2005 POLYETHERIMIDE (PEI), 10% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D989-B-2013 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) CONDUCTIVE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D989-B-2014 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) CONDUCTIVE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D529-A-2005 POLYETHER BLOCK AMIDE (PEBA) THERMOPLASTIC ELASTOMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSF-M4D774-A-2006 POLYETHERSULFONE (PESU), 30% GLASS FIBER REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D529-A-2010 POLYETHER BLOCK AMIDE (PEBA) THERMOPLASTIC ELASTOMER MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D844-A10-2005 POLYPHENYLENE ETHER + POLYSTYRENE (PPE+PS), BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSB-M4D844-A10***
  • FORD WSB-M4D824-A-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) FOAM, RIGID ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M4D436-A2-1986 POLYETHERIMIDE, 20% GLASS FIBER REINFORCED, INJECTION MOLDING COMPOUND [Replaced: FORD ESH-M4D436-A, FORD ESH-M4D436-A1]
  • FORD WSB-M4D824-A-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS) FOAM, RIGID ** TO BE USED WITH FORD WSS-M99P1111-A **
  • FORD WSB-M4D891-A1-2006 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D844-A10-2010 POLYPHENYLENE ETHER + POLYSTYRENE (PPE+PS), BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2D243-A6-2010 POLYURETHANE (POLYETHER BASED) FOAM, FLAME BONDABLE, 24 ?26 kg/m3 density ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M4D436-A2-2010 POLYETHERIMIDE, 20% GLASS FIBER REINFORCED - INJECTION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSL-M4D655-A-2005 THERMOPLASTIC ETHER ESTER ELASTOMER + POLYBUTYLENE TEREPHTHALATE (TEEE+PBT) BLEND MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D720-A-2005 THERMOPLASTIC POLYETHER ESTER ELASTOMER (TEEE), 50 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

国家市场监督管理总局、中国国家标准化管理委员会, Polyether+

  • GB/T 37196-2018 Plastics—Polyether polyols/polymeric polyols—Determination of aldehydes and ketones
  • GB/T 38273.2-2019 Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 2: Preparation of test specimens and determination of properties
  • GB/T 38273.1-2019 Plastics—Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion—Part 1:Designation system and basis for specification

Beijing Provincial Standard of the People's Republic of China, Polyether+

  • DB11/T 2008-2022 Polyether polyurethane concrete pavement design and construction technical specifications

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Polyether+

  • GJB 5395-2005 Specification for hydroxyl-terminated ethylene oxide and tetrahydrofuran copolymer

German Institute for Standardization, Polyether+

  • DIN 13014:1977 Polyether foam hospital mattresses; dimensions, requirements, testing
  • DIN 65498:1991 Aerospace; polyetherimide (PEI) semi-finished products and moulded parts; technical specification
  • DIN 13014 Bb.1:1977 Polyether foam hospital mattresses; directives for application and treatment
  • DIN 65498:1991-10 Aerospace; polyetherimide (PEI) semi-finished products and moulded parts; technical specification
  • DIN EN 4717:2021 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification; German and English version prEN 4717:2021
  • DIN EN 4717:2022 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification; German and English version EN 4717:2022
  • DIN EN ISO 23153-1:2020-06 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 23153-1:2020); German version EN ISO 23153-1:2020
  • DIN ISO 15309:2021-12 Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices (ISO 15309:2013)
  • DIN EN ISO 23153-2:2020-05 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020); German version EN ISO 23153-2:2020
  • DIN ISO 15309:2021 Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices (ISO 15309:2013)
  • DIN EN ISO 23153-1:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 23153-1:2020)
  • DIN EN 4718:2022 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification; German and English version EN 4718:2022
  • DIN EN 4718:2021 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification; German and English version prEN 4718:2021
  • DIN EN ISO 23153-2:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020)
  • DIN EN 4717:2022-06 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification; German and English version EN 4717:2022
  • DIN EN 4718:2022-06 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification; German and English version EN 4718:2022

Defense Logistics Agency, Polyether+

  • DLA L-P-535 E NOTICE 3-1999 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
  • DLA L-P-535 E VALID NOTICE 2-1991 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
  • DLA L-P-535 E-1979 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID

化学工业部, Polyether+

American National Standards Institute （ANSI), Polyether+

  • ANSI/ASTM D4875:1999 Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols (08.03)
  • ANSI/ASTM D4273:1999 Method for Testing Polyurethane Raw Materials: Determination of Primary Hydroxyl Contents of Polyether Polyols (08.02)

British Standards Institution (BSI), Polyether+

  • BS EN ISO 23153-1:2020 Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials - Designation system and basis for specifications
  • BS EN ISO 23153-2:2020 Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials - Preparation of test specimens and determination of properties
  • 12/30260913 DC BS EN 4717. Aerospace series. Polyetherketone with 55 % continuous carbon fibre by volume (PEEK-CF55)
  • 12/30260914 DC BS EN 4718. Aerospace series. Polyetherketone with 55 % continuous glass fibre by volume (PEEK-GF55)
  • BS EN ISO 14910-1:1998 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specifications
  • BS EN ISO 14910-1:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specification
  • BS EN ISO 14910-2:1998 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of properties
  • BS EN ISO 14910-2:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of propertie
  • 19/30379698 DC BS EN ISO 23153-1. Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials. Part 1. Designation system and basis for specifications
  • BS ISO 14910-1:1998 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Designation system and basis for specifications
  • BS ISO 14910-2:1998 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Preparation of test specimens and determination of properties
  • BS ISO 15309:2013 Implants for surgery. Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
  • BS EN 4717:2022 Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55). Stock shape material. Material specification
  • 19/30379701 DC BS EN ISO 23153-2. Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
  • BS EN ISO 20029-1:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specification
  • BS EN 4718:2022 Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55). Stock shape material. Material specification
  • BS EN 4056-006:2014 Aerospace series. Cable ties for harnesses. Peek cable ties. For operating temperatures. -55 C to 240 C. Product standard
  • 21/30432950 DC BS EN 4717. Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) stock shape material. Material specification
  • 18/30384604 DC BS EN 4718. Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) stock shape material. Material specification
  • 18/30384546 DC BS EN 4717. Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) stock shape material. Material specification

国家药监局, Polyether+

  • YY/T 1707-2020 Differential scanning calorimetry of polyetheretherketone polymers and their composites for use in surgical implants and medical devices

未注明发布机构, Polyether+

  • SAE AS81914/11B-2021 Tubing, Plastic, Lighweight, Zero Halogen, Extra Flexible, Convoluted, Helical, Close Convolution, Polyetheretherkeytone (PEEK)

Agricultural Standard of the People's Republic of China, Polyether+

Professional Standard - Energy, Polyether+

  • DL/T 2444-2021 Guidelines for maintenance and management of polyether synthetic oils for gas turbine control systems in power plants

European Committee for Standardization (CEN), Polyether+

  • EN ISO 23153-2:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020)
  • EN ISO 23153-1:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 23153-1:2020)
  • prEN 4717-2021 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification
  • prEN 4718-2021 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification
  • EN ISO 20029-1:2018 Plastics - Thermoplastic polyester/ester and polyether/ ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
  • EN ISO 14910-1:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
  • EN ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties

International Organization for Standardization (ISO), Polyether+

  • ISO 23153-1:2020 Plastics — Polyetheretherketone (PEEK) moulding and extrusion materials — Part 1: Designation system and basis for specifications
  • ISO 23153-2:2020 Plastics — Polyetheretherketone (PEEK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
  • ISO 15309:2013 Implants for surgery.Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
  • ISO 14910-1:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
  • ISO 20029-1:2017 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification
  • ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties

ES-UNE, Polyether+

  • UNE-EN ISO 23153-1:2021 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 23153-1:2020)
  • UNE-EN ISO 23153-2:2021 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020)
  • UNE-EN 4717:2022 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification (Endorsed by Asociación Española de Normalización in May of 2022.)
  • UNE-EN 4718:2022 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification (Endorsed by Asociación Española de Normalización in May of 2022.)

Professional Standard - Textile, Polyether+

United States Navy, Polyether+

  • NAVY MIL-S-85318 (1)-1999 SEALING COMPOUND, NON-CARCINOGEN CURING POLYURETHANE (POLYETHER-BASED), ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS
  • NAVY MIL-S-85318 NOTICE 1-1997 SEALING COMPOUND, NON-CARCINOGEN CURING POLYURETHANE (POLYETHER-BASED), ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS
  • NAVY MIL-S-85318-1979 SEALING COMPOUND, NON-CARCINOGEN CURING POLYURETHANE (POLYETHER-BASED), ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS
  • NAVY QPL-AS81044-QPD-2011 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
  • NAVY QPL-AS81044-2011 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Polyether+

  • PREN 4717-2019 Aerospace series Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) Stock shape material Material specification (Edition P 3)
  • PREN 4718-2019 Aerospace series Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) Stock shape material Material specification (Edition P 3)

AT-ON, Polyether+

  • OENORM EN 4717-2021 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification
  • OENORM EN 4718-2021 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification

全国标准信息公共服务平台, Polyether+

  • GB/T 1846-1980 Polychloroether resin dilute solution viscosity test method

Professional Standard - Aviation, Polyether+

  • HB 7607-1998 Polydiphenyl ether insulating impregnating varnish

CEN - European Committee for Standardization, Polyether+

  • EN ISO 14910-1:2006 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications
  • EN ISO 14910-2:2006 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties

U.S. Air Force, Polyether+

BR-ABNT, Polyether+

  • ABNT NBR 15723-3-2020 Implants for surgery - Polymeric materials Part 3: Requirements for polyaryletherketone (PAEK) polymers

Professional Standard - Agriculture, Polyether+

Professional Standard - Electron, Polyether+

  • SJ 52142/1-2003 Detailed specifications for polyphenylene oxide woven glass fabric copper clad laminates
  • SJ 52142/2-2003 Detail Specification for Polyphenylene Oxide Woven Glass fibre Copper Clad Laminate

Danish Standards Foundation, Polyether+

  • DS/EN ISO 14910-1:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specification

  Polyether standard, Polyether iodine value, polyether rubber, polyether side, Polyether acid value, polyether, Polyether polyester, Polyetherimide, Monohydroxypolyether, Perfluoropolyether, Polyether 50 series, Polyether acidity, Polyether+, Polyether acidity, Polyethersulfone, Multi-based polyether, Polyethersulfone material, Enthalpy polyether, amino polyether, Combined polyether.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved