ZH
RU
ES

Enthalpy polyether

Enthalpy polyether, Total:500 items.

In the international standard classification, Enthalpy polyether involves: Plastics, Insulating materials, Products of the chemical industry, Footwear, Pipeline components and pipelines, Organic chemicals, Paint ingredients, Medical equipment, Inorganic chemicals, Textile fibres, Compressors and pneumatic machines, Raw materials for rubber and plastics, Rubber and plastics products, Cellular materials, Reinforced plastics, Materials for aerospace construction, Protection of and in buildings, Construction materials, Electrical wires and cables, Products of the textile industry, Road engineering, Aerospace electric equipment and systems, Internal combustion engines, Farming and forestry, Printed circuits and boards, Sugar. Sugar products. Starch, Spices and condiments. Food additives, Environmental protection, Test conditions and procedures in general, Electrical accessories, Paints and varnishes, Protective equipment.


GM Europe, Enthalpy polyether

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Enthalpy polyether

Professional Standard - Machinery, Enthalpy polyether

  • JB/T 12420-2015 Polyetherether ketone moulding compounds for electrical purposes
  • JB/T 12419-2015 Polyphenylene sulfide moulding compounds for electrical purposes

Group Standards of the People's Republic of China, Enthalpy polyether

Defense Logistics Agency, Enthalpy polyether

  • DLA L-P-535 E NOTICE 3-1999 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
  • DLA L-P-535 E VALID NOTICE 2-1991 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
  • DLA L-P-535 E-1979 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID

GM Holden Ltd, Enthalpy polyether

BELST, Enthalpy polyether

Japanese Industrial Standards Committee (JISC), Enthalpy polyether

Association Francaise de Normalisation, Enthalpy polyether

  • NF T52-114:1985 Plastics. Basic materials for polyrethanes. Determination of the acid index of polyethers.
  • NF EN 6064:2017 Série aérospatiale - Analyse Enthalpique Différentielle (AED) des matériaux non métalliques (polymérisés) pour la détermination du degré de polymérisation
  • NF T52-115:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of water.
  • NF T52-111:1985 Plastics. Basic materials for polyurethanes. Polyethers and polyesters. Determination of the density.
  • NF T52-117:1985 Plastics. Base materials for polyurethanes. Polyethers. Determining of the cloud point.
  • NF T52-112:1985 Plastics. Basics materiels for polyurethanes. Polyethers. Determination of the hydroxyl value.
  • NF EN 4717:2022 Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de carbone continue par volume (PEEK-CF55) - Demi-produit - Spécification de matériau
  • NF T52-118:1985 Plastics. Basic materials for polyurethanes. Polyethers. Determining of the conventionnal pH value.
  • NF T50-011-1*NF EN ISO 23153-1:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 1 : designation system and basis for specifications
  • NF EN 4718:2022 Série aérospatiale - Polyétheréthercétone avec 55 % de fibre de verre continue par volume (PEEK-GF55) - Demi-produit - Spécification de matériau
  • NF T52-116:1985 Plastics. Basic materials for polyurethanes. Polyethers. Determination of non saturation level.
  • NF T52-119:1985 Plastics. Base materials for polyurethanes. Polyethers. Determination the sodium and potassium content.
  • NF T50-011-2*NF EN ISO 23153-2:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
  • NF T52-100:1980 Plastics. Base materials for polyurethanes. Polyethers, polyesters, isocyanates. List of test methods. Summary standard.
  • NF EN ISO 23153-2:2020 Plastiques - Matériaux à base de polyétheréthercétone (PEEK) pour moulage et extrusion - Partie 2 : préparation des éprouvettes et détermination des propriétés
  • NF EN ISO 23153-1:2020 Plastiques - Matériaux à base de polyétheréthercétone (PEEK) pour moulage et extrusion - Partie 1 : système de désignation et base de spécification
  • NF L18-001*NF EN 4717:2022 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification
  • NF EN 6041:2018 Série aérospatiale - Matériaux non métalliques - Méthode d'essai - Analyse Enthalpique Différentielle (AED) des matériaux non métalliques (non polymérisés)
  • NF L18-002*NF EN 4718:2022 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification
  • NF T52-151:1979 Plastics. Primary materials for polyurethanes. Polyesters, polyethers and isocyanates. Visual assessment of coloration in gardner units.
  • NF S94-179*NF ISO 15309:2014 Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices

GM North America, Enthalpy polyether

工业和信息化部, Enthalpy polyether

American Society for Testing and Materials (ASTM), Enthalpy polyether

  • ASTM F2026-07 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-07a Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-07e1 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-08 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-12 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2820-12 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
  • ASTM F2820-12(2021)e1 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
  • ASTM F2026-23 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-02 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-14 Standard Specification for Polyetheretherketone 40;PEEK41; Polymers for Surgical Implant Applications
  • ASTM F2026-16 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM D3418-12e1 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
  • ASTM D3418-12 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
  • ASTM F2026-00 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F2026-17 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F1876-98(2003)e1 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
  • ASTM F1876-98 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
  • ASTM D8033-16 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
  • ASTM D8033-22 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
  • ASTM F3333-20 Standard Specification for Chopped Carbon Fiber Reinforced (CFR) Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM F1579-98 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
  • ASTM F2026-10 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
  • ASTM D4349-96 Standard Classification System for Polyphenylene Ether (PPE) Materials
  • ASTM D4349-96(2004) Classification System for Polyphenylene Ether (PPE) Materials
  • ASTM D4349-16 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
  • ASTM F2778-09 Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
  • ASTM F1579-02 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
  • ASTM D5205-96 Standard Classification System for Polyetherimide (PEI) Materials
  • ASTM D5205-96(2003) Standard Classification System for Polyetherimide (PEI) Materials
  • ASTM D5205-10 Standard Classification System for Polyetherimide (PEI) Materials
  • ASTM D5205-16 Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials
  • ASTM D4349-10 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
  • ASTM D4349-22 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
  • ASTM F2778-09(2015) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
  • ASTM F2778-09(2020) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
  • ASTM D4067-96 Standard Specification for Reinforced and Filled Polyphenylene Sulfide (PPS) Injection Molding and Extrusion Materials
  • ASTM D4875-18 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
  • ASTM D4875-11 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
  • ASTM F1579-02e1 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
  • ASTM D7253-06(2011)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
  • ASTM D7253-16 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
  • ASTM D7253-22 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
  • ASTM D4273-23 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
  • ASTM D4273-11 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
  • ASTM D3418-21 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
  • ASTM D4273-18 Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of Polyether Polyols
  • ASTM D4875-05 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
  • ASTM D4875-99 Standard Test Methods of Polyurethane Raw Materials Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
  • ASTM D7742-11 Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 x2264; n x2264; 18) and Octylphenol Polyethoxylates (OPnEO, 2 x2264; n
  • ASTM D4273-05 Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of Polyether Polyols
  • ASTM D4273-99 Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of Polyether Polyols

Professional Standard - Medicine, Enthalpy polyether

  • YY/T 0660-2008 Standard specification for polyetheretherketone (PEEK) polymers for surgical implant applications
  • YY/T 0815-2010 Standard test method for measurement of enthalpy of fusion, percent crystallinity ，and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry

SAE - SAE International, Enthalpy polyether

  • SAE AMS3725A-1993 Core@ Polyurethane Foam (Polyether) Rigid@ Cellular
  • SAE AMS3266A-2017 Sealing Compound@ Polythioether Elastomeric Two-Part Electrically Conductive
  • SAE AMS3725/1B-2016 Core@ Polyurethane Foam (Polyether) 2.0 Pounds per Cubic Foot (32 kg/m3) Density
  • SAE AMS3725/2B-2016 Core@ Polyurethane Foam (Polyether) 4.0 Pounds per Cubic Foot (64 kg/m3) Density
  • SAE AS81914/11B-2016 TUBING@ PLASTIC@ LIGHTWEIGHT@ ZERO HALOGEN@ EXTRA FLEXIBLE@ CONVOLUTED@ HELICAL@ CLOSE CONVOLUTION@ POLYETHERETHERKEYTONE (PEEK)
  • SAE AMS3571/7A-1984 "Resin@ Polyether Urethane (EU) Casting Flexible@ Solid@ Unfilled 55 Durometer ""D"""
  • SAE AMS3571/2A-1984 "RESIN@ POLYETHER URETHANE (EU) CASTING Flexible@ Solid@ Unfilled 55 Durometer ""A"""
  • SAE AMS3571/1A-1984 "RESIN@ POLYETHER URETHANE (EU) CASTING Flexible@ Solid@ Unfilled 45 Durometer ""A"""
  • SAE AMS3571/5A-1984 "RESIN@ POLYETHER URETHANE (EU) CASTING Flexible@ Solid@ Unfilled 85 Durometer ""A"""
  • SAE AMS3571/8A-1984 "RESIN@ POLYETHER URETHANE (EU) CASTING Flexible@ Solid@ Unfilled 65 Durometer ""D"""
  • SAE AMS3571/4A-1984 "RESIN@ POLYETHER URETHANE (EU) CASTING Flexible@ Solid@ Unfilled 75 Durometer ""A"""
  • SAE AMS3571/9A-1984 "RESIN@ POLYETHER URETHANE (EU) CASTING Flexible@ Solid@ Unfilled 75 Durometer ""D"""
  • SAE AMS3571/6A-1984 "RESIN@ POLYETHER URETHANE (EU) CASTING Flexible@ Solid@ Unfilled 95 Durometer ""A"""
  • SAE AMS3571/3A-1984 "RESIN@ POLYETHER URETHANE (EU) CASTING Flexible@ Solid@ Unfilled 65 Durometer ""A"""

国家质量监督检验检疫总局, Enthalpy polyether

  • SN/T 4357-2015 Qualitative analysis of imported and exported textile fibers: ceramic, basalt, polyphenylene sulfide and polyether ether ketone fibers

Professional Standard - Chemical Industry, Enthalpy polyether

Indonesia Standards, Enthalpy polyether

Professional Standard - Light Industry, Enthalpy polyether

  • QB/T 2974-2008 Polyethylene glycol monomethyl ether
  • QB/T 4569-2013 Sugar industry aid.Antifoaming agent (sucrose polyoxypropylene ether)
  • QB/T 4338-2012 Footwear.Chemical test method.Determination of alkylphenol ethoxylates

Society of Automotive Engineers (SAE), Enthalpy polyether

  • SAE AMS7254A-2006 Perfluoroether Elastomer
  • SAE AMS7254B-2014 Perfluoroether Elastomer
  • SAE AMS3725A-1984 Core, Polyurethane Foam (Polyether), Rigid, Cellular
  • SAE AMS3725-2011 CORE, POLYURETHANE FOAM (POLYETHER) Rigid, Cellular
  • SAE AMS3725B-2012 Core, Polyurethane Foam (Polyether), Rigid, Cellular
  • SAE AMS3571-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type
  • SAE AMS3568A-2001 Sheet, Polyether Urethane (EU) Elastomer Foam Shock Absorbing
  • SAE AMS3571A-1984 RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled
  • SAE AMS3571B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled
  • SAE AMS3725/2-1984 CORE, POLYURETHANE FOAM (POLYETHER) 4.0 lb per cu ft (64 kg/m3) Density
  • SAE AS81914/11-2011 Tubing, Plastic, Lighweight, Zero Halogen, Extra Flexible, Convoluted, Helical, Close Convolution, Polyetheretherkeytone (PEEK)
  • SAE AS81914/11A-2012 Tubing, Plastic, Lighweight, Zero Halogen, Extra Flexible, Convoluted, Helical, Close Convolution, Polyetheretherkeytone (PEEK)
  • SAE AMS3568A-1991 Sheet, Polyether Urethane (EU) Elastomer Foam Shock Absorbing
  • SAE AMS3266-1994 SEALING COMPOUND, POLYTHIOETHER ELASTOMERICTwo PartElectrically Conductive
  • SAE AMS3573-2011 RESIN, POLYURETHANE (EU), CASTING Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 - 90
  • SAE AMS3571/8-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 65 "D"
  • SAE AMS3571/2-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 55 "A"
  • SAE AMS3571/6-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 95 "A"
  • SAE AMS3571/7-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 55 "D"
  • SAE AMS3571/3-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 65 "A"
  • SAE AMS3571/1-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 45 "A"
  • SAE AMS3571/9-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 75 "D"
  • SAE AMS3571/5-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 85 "A"
  • SAE AMS3571/4-1976 POLYURETHANE CASTING RESIN, FLEXIBLE, SOLID Polyether-Type Durometer Hardness 75 "A"
  • SAE AMS3573B-2003 Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 to 90
  • SAE AMS3573A-2003 Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 to 90
  • SAE AMS3266B-2022 Sealing Compound, Polythioether Elastomeric Two-Part Electrically Conductive
  • SAE AMS3573B-1994 Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid Low-Temperature Resistant, 80 to 90
  • SAE AMS3568/3-1983 FOAM, POLYETHER URETHANE (EU) ELASTOMER, SHOCK ABSORBING 20 lb/cu ft (320 kg/m3) Density
  • SAE AMS3571/6B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 95 Durometer “A”
  • SAE AMS3571/4B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75 Durometer “A”
  • SAE AMS3571/2B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 55 Durometer “A”
  • SAE AMS3571/5B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 85 Durometer “A”
  • SAE AMS3571/1B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 45 Durometer “A”
  • SAE AMS3571/8B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer “D”
  • SAE AMS3571/9B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75 Durometer “D”
  • SAE AMS3571/3B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer “A”
  • SAE AMS3568/1-1983 FOAM, POLYETHER URETHANE (EU) ELASTOMER, SHOCK ABSORBING 5 lb/cu ft (72 kg/m3) Density
  • SAE AMS3568/2-1983 FOAM, POLYETHER URETHANE (EU) ELASTOMER, SHOCK ABSORBING 15 lb/cu ft (240 kg/m3) Density
  • SAE AMS3573C-2011 Resin, Polyurethane (EU), Casting, Polyether-Type, Flexible, Solid, Low-Temperature Resistant 80 to 90
  • SAE AMS3568B-2011 Sheet, Polyether Urethane (EU) Elastomer Foam, Shock Absorbing
  • SAE AMS3568/3A-2006 Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 20 Pounds/Cubic Foot (320 kg/m3) Density
  • SAE AMS3725/1-1984 CORE, POLYURETHANE FOAM (POLYETHER) 2.0 lb per cu ft (32 kg/m3) Density
  • SAE AMS3568/2A-2006 Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 15 Pounds/Cubic Foot (240 kg/m3) Density
  • SAE AMS3725/1A-1993 (Noncurrent)Core, Polyurethane Foam (Polyether) 2.0 Pounds per Cubic Foot (32 kg/m3) Density
  • SAE AMS3725/2A-1993 (Noncurrent)Core, Polyurethane Foam (Polyether) 4.0 Pounds per Cubic Foot (64 kg/m3) Density
  • SAE AMS3568/1A-2006 Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) Density
  • SAE AMS3571/2B-1991 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 55 Durometer
  • SAE AMS3571C-2011 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled
  • SAE AMS3571/1B-1991 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 45 Durometer
  • SAE AMS3571B-1991 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled FSC 9320
  • SAE AMS3571/7B-1991 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 55 Durometer
  • SAE AMS3571/6B-1991 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 95 Durometer
  • SAE AMS3571/5B-1991 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 85 Durometer
  • SAE AMS3571/4B-1991 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75 Durometer
  • SAE AMS3571/3B-1991 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer
  • SAE AMS3571/9B-1991 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 75 Durometer
  • SAE AMS3571/8B-1991 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 65 Durometer
  • SAE AMS3571/7B-2001 Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled 55 Durometer “D”

Professional Standard - Textile, Enthalpy polyether

Professional Standard - Energy, Enthalpy polyether

U.S. Military Regulations and Norms, Enthalpy polyether

工业和信息化部/国家能源局, Enthalpy polyether

  • JB/T 12952-2016 Polyetheretherketone (PEEK) valve discs for reciprocating piston compressors

ZA-SANS, Enthalpy polyether

Professional Standard - Aerospace, Enthalpy polyether

  • QJ 1316-1987 Technical conditions of polyether polyurethane casting glue
  • QJ 1301-1987 Production Manual of Polyether Polyurethane Casting Rubber Products
  • QJ 913.5-1985 Composite solid propellant (polyether system) pH value determination method
  • QJ 913.4-1985 Composite solid propellant (polyether system) - Method for determination of benzene extraction value
  • QJ 913.7-1985 Composite solid propellant (polyether system) Calcium carbonate content analysis method

Professional Standard - Aviation, Enthalpy polyether

  • HB 7607-1998 Polydiphenyl ether insulating impregnating varnish

化学工业部, Enthalpy polyether

Military Standard of the People's Republic of China-General Armament Department, Enthalpy polyether

  • GJB 3584-1999 Specification for modified polyphenylene ether plastics
  • GJB 1582-1993 Specification for polyether-based polyurethane rubber-coated nylon fabrics for military use
  • GJB 8134-2013 Specification for 3,3-bis (azidomethy) oxetane and tetrahydrofuran copolymer

CZ-CSN, Enthalpy polyether

  • CSN 64 0353-1982 Polyurethane produets polyethers nd polyesters raw materials. etermination olacid number
  • CSN 64 0352-1982 Polyurethane products polyethers raw materials. Determination of pH value
  • CSN 64 0351-1982 Polyurethane products polyethers raw materials. Determination of iodine number
  • CSN 64 0354-1982 Polyurethane products polyethers nd polyesters raw materials. Deter- ination of hydroxyl number
  • CSN 64 5480-1983 Flexible eellular polyurethane ther type eneral requirements
  • CSN 64 0324-1980 Polyvinylchloride. ethod for determination of extractible atter by methanol or diethylether

PL-PKN, Enthalpy polyether

  • PN C89052-01-1985 Polyethers for polyurethanes Test methods General regulations
  • PN C89281-1986 Polyethylene Determination of matter extractable by diethyl ether
  • PN C89052-02-1985 Polyethers for polyurethanes Test methods Determination of the acid value
  • PN C89052-03-1985 Polyethers for polyurethanes Test methods Determination of the hydroxyl value

GM Daewoo, Enthalpy polyether

United States Navy, Enthalpy polyether

  • NAVY QPL-AS81044-QPD-2011 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
  • NAVY QPL-AS81044-2011 Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarlyene Insulated, Copper or Copper Alloy
  • NAVY MIL-S-85318 (1)-1999 SEALING COMPOUND, NON-CARCINOGEN CURING POLYURETHANE (POLYETHER-BASED), ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS
  • NAVY MIL-S-85318 NOTICE 1-1997 SEALING COMPOUND, NON-CARCINOGEN CURING POLYURETHANE (POLYETHER-BASED), ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS
  • NAVY MIL-S-85318-1979 SEALING COMPOUND, NON-CARCINOGEN CURING POLYURETHANE (POLYETHER-BASED), ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS

Korean Agency for Technology and Standards (KATS), Enthalpy polyether

(U.S.) Ford Automotive Standards, Enthalpy polyether

  • FORD WSB-M4D844-A8-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPOUND
  • FORD WSB-M4D844-A11-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), MOLDING COMPUND
  • FORD WSK-M4D844-A9-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS), IMPACT RESISTANT MOLDING COMPOUND
  • FORD WSK-M4D838-A-2006 POLYETHERETHERKETONE (PEEK), SELF-EXTINGUISHING (SE) MOLDING COMPOUND ** TO BE USED WITH FORD WSS-M99P1111-A **
  • FORD WSK-M4D592-A-2005 POLYETHERSULFONE (PES), SE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESW-M2D234-A-2004 POLYURETHANE MOLDING COMPOUND, MODIFIED- POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESW-M2D234-C-2004 POLYURETHANE MOLDING COMPOUND, MODIFIED- POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESW-M2D234-A-2010 POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESW-M2D234-C-2010 POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M4D465-A2-1988 TUBING, PTFE - POLYPHENYLENE SULFIDE FILLED Shown on ESA-M4D465-A1
  • FORD WSS-M4D989-B-2013 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) CONDUCTIVE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D989-B-2014 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) CONDUCTIVE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D844-A10-2005 POLYPHENYLENE ETHER + POLYSTYRENE (PPE+PS), BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSB-M4D844-A10***
  • FORD WSB-M4D824-A-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) FOAM, RIGID ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D436-A3-1987 POLYETHERIMIDE (PEI), 30% GLASS FIBER REINFORCED, INJECTION MOLDING COMPOUND
  • FORD ESE-M99G133-A2-2006 SOUND ABSORBER, OPEN CELL, POLYETHER POLYURETHAN FOAM **TO BE USED WITH FORD WSS-M99P1111-A**
  • FORD WSB-M4D824-A-2006 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE +PS) FOAM, RIGID ** TO BE USED WITH FORD WSS-M99P1111-A **
  • FORD WSB-M4D891-A1-2006 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D844-A10-2010 POLYPHENYLENE ETHER + POLYSTYRENE (PPE+PS), BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2D243-A6-2014 POLYURETHANE (POLYETHER BASED) FOAM, FLAME BONDABLE, 24 - 26 kg/m3 density ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M6J128-A2-2008 PRIMER SURFACER, POLYETHER POLYURETHANE- ETHYLENE PROPYLENE DIENE RUBBER (EPDM) ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M2D213-A-2004 POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M4D347-A-2005 POLYURETHANE MOLDING COMPOUND, ETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D747-A-2006 POLYPHENYLENE ETHER (PPE), MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D747-A-2010 POLYPHENYLENE ETHER (PPE), MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D545-A-2014 NYLON/POLYPHENYLENE OXIDE ALLOY, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D1006-A2-2013 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 70 DUROMETER D HARDNESS BLOW MOLDING COMPOUND
  • FORD WSB-M4D891-A1-2010 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D545-A-2005 NYLON/POLYPHENYLENE OXIDE ALLOY, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D545-A-2010 NYLON/POLYPHENYLENE OXIDE ALLOY, PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M2D234-D-2004 POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESW-M2D234-C
  • FORD ESW-M2D234-B-2004 POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESW-M2D234-A
  • FORD WSK-M4D623-A2-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) IMPACT MODIFIED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***

RU-GOST R, Enthalpy polyether

  • GOST 25240-1982 Polyestheres for polyurethanes. Method of iodin value determination
  • GOST 25241-1982 Polyethere for polyurethanes. Method of pH determination
  • GOST 25261-1982 Polyethers and polyesters for polyurethanes. Method of hydroxyl value determination
  • GOST 25210-1982 Polyethers and polyesters for polyurethanes. Method of acid value determinations
  • GOST 27952-1988 Unsaturated polyester resins. Specifications
  • GOST 26393-1984 Polyethylene. Method for determination of extractable substances content by diethyl ether
  • GOST 24947-1981 Polyvinylchloride. Method for determination of the content of substances extracted with methanol or ethyl ether
  • GOST 26194-1984 Resins for paint and varnish. Methods for determination of hydroxyl number of alkyd and polyester resins
  • GOST 34362.1-2017 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Part 1. Designation system

IE-NSAI, Enthalpy polyether

GOSTR, Enthalpy polyether

国家市场监督管理总局、中国国家标准化管理委员会, Enthalpy polyether

  • GB/T 25254-2022 Poly-(tetra methylene ether glycol)(PTMEG) for industrial use
  • GB/T 37196-2018 Plastics—Polyether polyols/polymeric polyols—Determination of aldehydes and ketones

British Standards Institution (BSI), Enthalpy polyether

  • BS EN ISO 23153-1:2020 Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials - Designation system and basis for specifications
  • BS EN ISO 23153-2:2020 Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials - Preparation of test specimens and determination of properties
  • 19/30379698 DC BS EN ISO 23153-1. Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials. Part 1. Designation system and basis for specifications
  • BS ISO 15309:2013 Implants for surgery. Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
  • BS EN 4717:2022 Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55). Stock shape material. Material specification
  • 19/30379701 DC BS EN ISO 23153-2. Plastics. Polyetheretherketone (PEEK) moulding and extrusion materials. Part 2. Preparation of test specimens and determination of properties
  • BS ISO 21264:2019 Surface active agents. Detergents. Determination of alkylphenol ethoxylates
  • BS EN 4718:2022 Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55). Stock shape material. Material specification
  • BS EN 4056-006:2014 Aerospace series. Cable ties for harnesses. Peek cable ties. For operating temperatures. -55 C to 240 C. Product standard
  • BS ISO 16365-3:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion. Distinction between ether and ester polyurethanes by determination of the ester group content
  • 21/30432950 DC BS EN 4717. Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) stock shape material. Material specification
  • 18/30384604 DC BS EN 4718. Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) stock shape material. Material specification
  • 18/30384546 DC BS EN 4717. Aerospace series. Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) stock shape material. Material specification
  • BS CWA 16106:2010 PPE for chemical, biological, radiological and nuclear, (CBRN) hazards
  • BS EN ISO 14910-1:1998 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specifications
  • BS EN ISO 14910-1:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Designation system and basis for specification
  • 21/30432953 DC BS EN 4718. Aerospace series. Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55). Stock shape material. Material specification
  • BS EN ISO 14910-2:1998 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of properties
  • BS EN ISO 14910-2:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion. Preparation of test specimens and determination of propertie

国家药监局, Enthalpy polyether

  • YY/T 1707-2020 Differential scanning calorimetry of polyetheretherketone polymers and their composites for use in surgical implants and medical devices

YU-JUS, Enthalpy polyether

未注明发布机构, Enthalpy polyether

  • SAE AS81914/11B-2021 Tubing, Plastic, Lighweight, Zero Halogen, Extra Flexible, Convoluted, Helical, Close Convolution, Polyetheretherkeytone (PEEK)

German Institute for Standardization, Enthalpy polyether

  • DIN EN 4717:2022 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification; German and English version EN 4717:2022
  • DIN EN 4717:2021 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification; German and English version prEN 4717:2021
  • DIN ISO 15309:2021-12 Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices (ISO 15309:2013)
  • DIN EN ISO 23153-1:2020-06 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 23153-1:2020); German version EN ISO 23153-1:2020
  • DIN ISO 15309:2021 Implants for surgery - Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices (ISO 15309:2013)
  • DIN/TS 51699:2023 Fuels - Polyoxymethylene dimethylether (OME) - Requirements and Test Methods / Note: Date of issue 2023-03-17
  • DIN EN ISO 23153-2:2020-05 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020); German version EN ISO 23153-2:2020
  • DIN EN ISO 23153-1:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 23153-1:2020)
  • DIN 13014:1977 Polyether foam hospital mattresses; dimensions, requirements, testing
  • DIN EN 4718:2022 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification; German and English version EN 4718:2022
  • DIN EN 4718:2021 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification; German and English version prEN 4718:2021
  • DIN EN ISO 23153-2:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020)
  • DIN 65498:1991 Aerospace; polyetherimide (PEI) semi-finished products and moulded parts; technical specification
  • DIN 13014 Bb.1:1977 Polyether foam hospital mattresses; directives for application and treatment
  • DIN 65498:1991-10 Aerospace; polyetherimide (PEI) semi-finished products and moulded parts; technical specification
  • DIN EN 4717:2022-06 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification; German and English version EN 4717:2022
  • DIN EN 4718:2022-06 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification; German and English version EN 4718:2022

Professional Standard - Building Materials, Enthalpy polyether

全国标准信息公共服务平台, Enthalpy polyether

  • GB/T 1846-1980 Polychloroether resin dilute solution viscosity test method

BR-ABNT, Enthalpy polyether

European Committee for Standardization (CEN), Enthalpy polyether

  • EN ISO 23153-2:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020)
  • EN ISO 23153-1:2020 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 23153-1:2020)
  • prEN 4717-2021 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification
  • prEN 4718-2021 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification

International Organization for Standardization (ISO), Enthalpy polyether

  • ISO 23153-1:2020 Plastics — Polyetheretherketone (PEEK) moulding and extrusion materials — Part 1: Designation system and basis for specifications
  • ISO 23153-2:2020 Plastics — Polyetheretherketone (PEEK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
  • ISO 18373-2:2008 Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Part 2: Measurement of the enthalpy of fusion of crystallites
  • ISO 15309:2013 Implants for surgery.Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices

ES-UNE, Enthalpy polyether

  • UNE-EN ISO 23153-1:2021 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 23153-1:2020)
  • UNE-EN ISO 23153-2:2021 Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020)
  • UNE-EN 4717:2022 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification (Endorsed by Asociación Española de Normalización in May of 2022.)
  • UNE-EN 4718:2022 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification (Endorsed by Asociación Española de Normalización in May of 2022.)

U.S. Air Force, Enthalpy polyether

American National Standards Institute （ANSI), Enthalpy polyether

  • ANSI/ASTM D4875:1999 Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols (08.03)
  • ANSI/ASTM D4273:1999 Method for Testing Polyurethane Raw Materials: Determination of Primary Hydroxyl Contents of Polyether Polyols (08.02)

AENOR, Enthalpy polyether

  • UNE 53967:2015 IN Plastics. Flexible polyurethane foam. Tolerances in specifications of ether polyurethane block foams.

Beijing Provincial Standard of the People's Republic of China, Enthalpy polyether

  • DB11/T 2008-2022 Polyether polyurethane concrete pavement design and construction technical specifications

Professional Standard - Electron, Enthalpy polyether

  • SJ 52142/1-2003 Detailed specifications for polyphenylene oxide woven glass fabric copper clad laminates
  • SJ 52142/2-2003 Detail Specification for Polyphenylene Oxide Woven Glass fibre Copper Clad Laminate

National Health Commission of the People's Republic of China, Enthalpy polyether

  • GB 1886.72-2016 National Food Safety Standard Food Additive Polyoxyethylene Polyoxypropylene Amino Ether
  • GB 1886.259-2016 National Food Safety Standard Food Additive Sucrose Polypropylene Ether
  • GB 1886.297-2018 National Food Safety Standard Food Additive Polyoxypropylene Glyceryl Ether

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Enthalpy polyether

  • PREN 4717-2019 Aerospace series Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) Stock shape material Material specification (Edition P 3)
  • PREN 4718-2019 Aerospace series Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) Stock shape material Material specification (Edition P 3)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Enthalpy polyether

  • GJB 5395-2005 Specification for hydroxyl-terminated ethylene oxide and tetrahydrofuran copolymer

AT-ON, Enthalpy polyether

  • OENORM EN 4717-2021 Aerospace series - Polyetheretherketone with 55 % continuous carbon fibre by volume (PEEK-CF55) - Stock shape material - Material specification
  • OENORM EN 4718-2021 Aerospace series - Polyetheretherketone with 55 % continuous glass fibre by volume (PEEK-GF55) - Stock shape material - Material specification

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Enthalpy polyether

  • ASHRAE SF-98-16-2-1998 Development of Polyvinylether Refrigeration Oil for Hydrofluorocarbon Air-Conditioning Systems

International Federation of Trucks and Engines, Enthalpy polyether

Professional Standard - Commodity Inspection, Enthalpy polyether

  • SN/T 4311-2015 Acute toxicity evaluation method for polyethenoxy ether surface active agent

海关总署, Enthalpy polyether

  • HS/T 54-2017 Method for identification of nonylphenol polyoxyethylene ether in surfactants

  Polyether standard, Polyether iodine value, crystallization enthalpy melting enthalpy, crystallization enthalpy melting enthalpy, polyether rubber, polyether side, Polyether acid value, polyether, Polyether polyester, Polyetherimide, Monohydroxypolyether, Melting enthalpy Crystallization enthalpy, Polyether acidity, Polyether+, Polyether acidity, Polyethersulfone, Enthalpy of crystallization and enthalpy of fusion, Enthalpy polyether, amino polyether, Combined polyether.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved