ZH
RU
ES

Calibration Quality Control Methods

Calibration Quality Control Methods, Total:360 items.

In the international standard classification, Calibration Quality Control Methods involves: Quality, Radiation measurements, Analytical chemistry, Clothes, Road vehicle systems, Vibrations, shock and vibration measurements, Water quality, Air quality, Earthworks. Excavations. Foundation construction. Underground works, Test conditions and procedures in general, Milk and milk products, Electrical and electronic testing, Non-destructive testing, Refractories, Welding, brazing and soldering, Construction materials, Document imaging applications, Horology, Semiconducting materials, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Plastics, Vocabularies, Character symbols, Measurement of volume, mass, density, viscosity, Railway engineering in general, Road vehicles in general, Geology. Meteorology. Hydrology, Thermodynamics and temperature measurements, Services, Environmental protection, Industrial automation systems, Corrosion of metals, Nuclear energy engineering, Equipment for petroleum and natural gas industries, Laboratory medicine, Graphic technology, Metrology and measurement in general, Sensory analysis, Medical sciences and health care facilities in general, Electricity. Magnetism. Electrical and magnetic measurements, Organic chemicals, Surface treatment and coating, Capacitors, Data storage devices, Farming and forestry, Testing of metals, Radiation protection, Optoelectronics. Laser equipment, Telecommunication systems, Medical equipment, Valves, Mining and quarrying, Ergonomics, Soil quality. Pedology, Products of the textile industry, Photography, Vibration and shock with respect to human beings, Inorganic chemicals, Jewellery, Materials for aerospace construction.

Group Standards of the People's Republic of China, Calibration Quality Control Methods

T/SXCAA 012-2021 Guidelines for Quality Control of Linear Calibration Curves
T/YXNX 003-2021 Quality control method for testing results of refractoriness under load of refractories (non-differential,with rising temperature)

ANSI - American National Standards Institute, Calibration Quality Control Methods

N15.18-1975 MASS CALIBRATION TECHNIQUES FOR NUCLEAR MATERIAL CONTROL (INMM)
N15.18-1988 Nuclear Materials - Mass Calibration Techniques for Control (INMM)

International Organization for Standardization (ISO), Calibration Quality Control Methods

IEC/CD 63465:2023 Calibration and quality control in the use of radionuclide calibrators
ISO 6145-7:2018 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 7: Thermal mass-flow controllers
ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
ISO 25337:2010 Plastics - Production quality control - Statistical method for using single measurements
ISO 7395:1984 Gas analysis — Preparation of calibration gas mixtures — Mass dynamic method
ISO 8196-2:2009 | IDF 128-2:2009 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 2: Calibration and quality control in the dairy laboratory
ISO 8196-2:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 2: Calibration and quality control in the dairy laboratory
ISO 8196-2:2009|IDF 128-2:2009 Definition and evaluation of the overall accuracy of variation methods for cow milk analysis Part 2: Calibration and quality control of dairy laboratories
ISO 11698-2:2000 Micrographics - Methods of measuring image quality produced by aperture card scanners - Part 2: Quality criteria and control
ISO 8196-2:2000 Milk - Definition and evaluation of the overall accuracy of indirect methods of milk analysis - Part 2: Calibration and quality control in the dairy laboratory
ISO 23875:2021 Mining - Air quality control systems for operator enclosures - Performance requirements and test methods
ISO 23875:2021/Amd 1:2022 Mining — Air quality control systems for operator enclosures — Performance requirements and test methods — Amendment 1
ISO 8514-2:2000 Micrographics - Alphanumeric computer output microforms - Quality control - Part 2: Method
ISO 8514-2:1992 Micrographics; alphanumeric computer output microforms; quality control; part 2: method
ISO/CD 6893:2023 Jewellery and precious metals — Quality control of batches and sets of small diamonds — Terminology, classification and test methods
ISO/TS 14198:2019 Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems

British Standards Institution (BSI), Calibration Quality Control Methods

BS ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Thermal mass-flow controllers
BS EN ISO 6145-7:2010 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
BS EN ISO 6145-7:2018 Tracked Changes. Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Thermal mass-flow controllers
BS EN ISO 6145-1:2004 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration
BS EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Methods of calibration
BS ISO 8196-2:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Calibration and quality control in the dairy laboratory
BS ISO 11698-2:2000 Micrographics. Methods of measuring image quality produced by aperture card scanners - Quality criteria and control
BS ISO 11698-2:2001 Micrographics - Methods of measuring image quality produced by aperture card scanners - Quality criteria and control
BS 7550-1:1992 Calibration of spherical tanks for refrigerated light-hydrocarbon fluids in ships. Method of stereo-photogrammetry
BS EN ISO 6145-6:2017 Gas analysis. Preparation of calibration gas mixtures using dynamic methods. Critical flow orifices
BS ISO 8514-2:2000 Micrographics - Alphanumeric computer output microforms - Quality control - Method
BS ISO 23875:2021 Mining. Air quality control systems for operator enclosures. Performance requirements and test methods
BS EN ISO 23875:2022 Mining. Air quality control systems for operator enclosures. Performance requirements and test methods
22/30449743 DC BS EN ISO 23875 AMD1. Mining. Air quality control systems for operator enclosures. Performance requirements and test methods

ES-UNE, Calibration Quality Control Methods

UNE-EN ISO 6145-7:2020 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
UNE 135352:2018 Vertical signs and road delineators. "In situ" quality control. Characteristics and test methods.
UNE-EN ISO 23875:2022 Mining - Air quality control systems for operator enclosures - Performance requirements and test methods (ISO 23875:2021)
UNE-EN ISO 6145-6:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
UNE-ISO 12647-1:2015 Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 1: Parameters and measurement methods.

Shanxi Provincial Standard of the People's Republic of China, Calibration Quality Control Methods

DB14/T 1981-2020 Internal quality control reference material control method for the validity of test results

RU-GOST R, Calibration Quality Control Methods

GOST 4103-1982 Ready-made sewing goods. Methods of quality control
GOST 24830-1981 Concrite refractories. Ultrasonic method of quality control
GOST R ISO 12491-2011 Building materials and components. Statistical methods for quality control
GOST R 50779.12-2021 Statistical methods. Statistical quality control. Item random sampling methods
GOST R 50779.11-2000 Statistical methods. Statistical quality control. Terms and definitions
GOST R 54798-2011 Control, monitoring and safety means of railway rolling stock. Safety requirements and control methods
GOST R 51814.3-2001 Quality systems for automotive industry. Methods of statistical process control
GOST R 54607.8-2016 Public catering services. Methods of laboratory quality control of products catering. Part 8. Rapid-methods of control
GOST R 54607.8-2016(2020) Public catering services. Methods of laboratory quality control of products catering. Part 8. Rapid-methods of control
GOST R 54342-2011 Social services of the population. Methods of quality control of social services
GOST R 54342-2011(2020) Social services of the population. Methods of quality control of social services
GOST R 53133.2-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials
GOST 8.294-1985 State system of ensuring the uniformity of measurements. A.c. balanced bridges. Calibration methods
GOST R 54607.3-2014 Public catering services. Methods of laboratory quality control of products catering. Part 3. Methods of control of manufacturing processes of products of public catering
GOST R 54607.3-2014(2020) Public catering services. Methods of laboratory quality control of products catering. Part 3. Methods of control of manufacturing processes of products of public catering
GOST R 56343-2015 Monocyclic aromatic hydrocarbons. Determination of trace Impurities by gas chromatography test method using the external calibration
GOST R 54607.4-2015 Public catering services. Methods of laboratory quality control of products catering. Part 4. Methods for determination of moisture and dry substances
GOST R 54607.4-2015(2019) Public catering services. Methods of laboratory quality control of products catering. Part 4. Methods for determination of moisture and dry substances
GOST R 54607.2-2012 Public catering services. Methods of laboratory control of catering products. Part 2. Methods of physical and chemical tests
GOST R 54607.2-2012(2020) Public catering services. Methods of laboratory control of catering products. Part 2. Methods of physical and chemical tests
GOST R 54607.6-2015 Public catering services. Methods of laboratory quality control of products catering. Part 6. Methods for determination of sugar
GOST R 54607.5-2015 Public catering services. Methods of laboratory quality control of products of public catering. Part 5. Methods for determination of fat
GOST R 54607.6-2015(2020) Public catering services. Methods of laboratory quality control of products catering. Part 6. Methods for determination of sugar
GOST R 54607.5-2015(2020) Public catering services. Methods of laboratory quality control of products of public catering. Part 5. Methods for determination of fat
GOST 16971-1971 Welded joints of Plasticized VPC, unplasticized VPC and polyethulene. Qualitu control methods. Total requirements
GOST 12.1.031-1981 Occupational safety standards system. Lasers. Methods of dosimetrical control of laser radiation
GOST R 54607.7-2016 Public catering services. Methods of laboratory quality control of products catering. Part 7. Determination of protein by the Kjeldahl method
GOST R 55237.3-2015 Ergonomics of vehicles. Ergonomic aspects of transport information and control systems. Calibration tasks for methods which assess driver demand
GOST R ISO 12647-1-2009 Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 1. Parameters and measurement methods
GOST R ISO 12647-1-2017 Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Part 1. Parameters and measurement methods
GOST R 12.1.031-2010 Occupational safety standards system. Lasers. Methods of dosimetrical control of laser radiation
GOST R 54607.9-2016 Public catering services. Methods of laboratory quality control of products catering. Part 9. Microbiological tests
GOST 12.4.012-1983 Occupational safety standards system. Vibration. Means for measurement and control of vibration in site. Technical requirements
GOST R 54607.10-2017 Public catering services. Methods of laboratory quality control of products catering. Part 10. Determination of total ash
GOST R 54607.1-2011(2020) Public catering services. Methods of laboratory quality control of products catering. Part 10. Determination of total ash

BELST, Calibration Quality Control Methods

STB 2431-2015 Telephone services. Quality requirements. Standards and methods of control
STB 2104-2017 IP-telephony service. Quality specification and methods of control
STB 1188-99 Drinking water. General requirements for organization and quality control methods
STB 1962-2012 Data transmission services. Quality requirements. Norms and methods of control
STB 1904-2011 Cellular mobile telecommunication services. Quality specifications and methods of control

Association Francaise de Normalisation, Calibration Quality Control Methods

NF EN ISO 6145-7:2018 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes dynamiques - Partie 7 : régulateurs thermiques de débit massique
NF S81-550:2017 Horlogerie - Méthode de contrôle de la qualité des montres à quartz
NF X20-205-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7 : thermal mass-flow controllers.
NF P94-105:2012 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie variable - Principe et méthode d'étalonnage du pénétromètre - Exploitation des résultats - Interprétation
NF X20-211:1983 Gas analysis. Preparation of calibration gas mixtures. Mass dynamic method.
NF ISO 8196-2:2009 Lait - Définition et évaluation de la précision globale des méthodes alternatives d'analyse du lait - Partie 2 : calibrage et contrôle qualité dans les laboratoires laitiers
NF S81-513:2013 Horlogerie - Méthode pratique de contrôle de la qualité des montres à ancre empierrée
NF ISO 14368-3:2008 Verres de montres minéraux et en saphir - Partie 3 : critères qualitatifs et méthodes de contrôle
NF P94-063:2011 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie constante - Principe et méthode d'étalonnage des pénétrodensitographes - Exploitation des résultats - Interprétation
NF S81-551-1:2013 Horlogerie - Mouvements de montres à quartz - Partie 1 : méthode de contrôle de la qualité
NF V09-502:2013 Analyse sensorielle - Directives générales pour un suivi, par approche sensorielle, de la qualité d'un produit au cours de sa fabrication
NF EN ISO 6145-5:2011 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 5 : dispositifs d'étalonnage par capillaires
XP CEN/TS 15674:2008 Qualité de l'air - Mesures des émissions de sources fixes - Lignes directrices pour l'élaboration de méthodes normalisées
NF X20-204:1974 Gas analysis. Method for the dynamic preparation of gas mixtures for calibration by proportioning piston pumps.
XP X43-378*XP CEN/TS 15674:2008 Air Quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
NF C46-503:1993 INDUSTRIAL-PROCESS CONTROL VALVES. PART 2 : FLOW CAPACITY. SECTION ONE : SIZING EQUATIONS FOR INCOMPRESSIBLE FLUID FLOW UNDER INSTALLED CONDITIONS. (EUROPEAN STANDARD EN 60 534-2-1).
NF EN ISO 23875:2022 Exploitation minière - Systèmes de contrôle de la qualité de l'air destinés aux enceintes de l'opérateur - Exigences de performance et méthodes d'essai
NF X20-205-6*NF EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6 : critical flow orifices
NF EN ISO 6145-6:2017 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 6 : orifices de débit critiques
NF EN 14772:2021 Brides et leurs assemblages - Contrôle de l'assurance de la qualité et essais de joints conformément aux séries de normes EN 1514 et EN 12560
NF X31-614:2017 Qualité du sol - Méthode de détection et de caractérisation des pollutions - Réalisation d'un forage de contrôle ou de suivi de la qualité de l'eau souterraine au droit et autour d'un site potentiellement pollué
NF EN ISO 6145-11:2008 Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 11 : génération électrochimique
NF EN ISO 4259-4:2022 Produits pétroliers et connexes - Fidélité des méthodes de mesure et de leurs résultats - Partie 4 : utilisation de cartes de contrôle statistique pour valider l'état 'sous maîtrise statistique' pour l'exécution d'une méthode d'essai no...

YU-JUS, Calibration Quality Control Methods

JUS C.T3.035-1987 Weldedjoints. Quality control methods

RO-ASRO, Calibration Quality Control Methods

STAS R 12495-1986 WELDED JOINTS Selection of the quality control method
STAS 12206-1983 OPENED REUTILIZAB1LE TEXTILES BuIh for quality control and metkods of control
STAS 560/1-1984 COTTON CORD FABRIGS FOR TYRES Rules for quality control and methods of control
STAS 1893/2-1987 ROTATING ELECTRICAL MACHINES Rules and methodsjfor quality control
STAS R 12494-1986 BRAZED AND SOLDERED JOINTS Selection of the quality control method
STAS 10784/2-1987 TURBO-GENERATORS Rules and methods for quality control
STAS 1631-1979 MEDICINAL AND AROMATIC PI.ANTS Rules and methods for quality control
STAS 456-1973 BURNT CLAY BUILDING BRICKS Rules and methods for qiiality control
STAS 9057/3-1971 ELFXTROMKDICAL APPARATUS AND KQUIPMKNT Rules and niotho/Is for quality control
STAS 9057/3-1971-1 ELECTROMEDICAL APPARATUS AND EQUIPMENT Rules and methods for quality control
STAS 9385/2-1982 SYNCHRONOUS HYDROGENERATORS Rules and methods for quality control
STAS 10279/6-1981 INDUSTRIAL TRUCKS Specification of inspection tests and methods for quality control
STAS 8341/3-1975 PAPER BASE POLYMER-BASED WALL TAPESTRY Rules and methods for quality control
STAS 9245-1973 STRINGS Rules for quality control methods for testing, storage and transportation
STAS 1073-1984 PRESERVED FRUIT JUICES Rules for quality control, packaging, marking, storage, methods of analysis and transport
STAS 9181-1989 METAL BOX-PALLETS Rules for quality control, inspection methods, delivery, storage and transport
STAS 8556-1970 ELECTRIC AND ELECTRONIC ANALOGICAL ELEMENTS FOR AUTOMATION UNITS Rules for quality control Methods of test
STAS 989/1-1977 Nursery stock GRAFTED FRUIT TREES Rules for quality control, methods for inspection, packing, marking, storage and transport

Society of Automotive Engineers (SAE), Calibration Quality Control Methods

SAE J661-1997 Brake Lining Quality Control Test Procedure

American Society for Testing and Materials (ASTM), Calibration Quality Control Methods

ASTM D7282-06 Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
ASTM D7282-14 Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
ASTM D7282-21 Standard Practice for Setup, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
ASTM D7282-21e1 Standard Practice for Setup, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM D5847-99ae1 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D5847-22 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D6850-03(2008) Standard Guide for QC of Screening Methods in Water
ASTM D6850-13 Standard Guide for QC of Screening Methods in Water
ASTM D5847-02(2020) Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM F106-12 Standard Specification for Brazing Filler Metals for Electron Devices
ASTM E142-92 Method for Controlling Quality of Radiographic Testing (Withdrawn 2000)
ASTM E801-06(2011) Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices
ASTM F1527-00 Standard Guide for Application of Silicon Standard Reference Materials and Reference Wafers for Calibration and Control of Instruments for Measuring Resistivity of Silicon
ASTM D5847-02(2012) Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D6850-03 Standard Guide for QC of Screening Methods in Water
ASTM D5847-02(2007) Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D5847-02 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM E2069-06 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-00 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-06(2012) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM D5280-96(2007) Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM D5280-96 Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM D5280-96(2013) Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM B810-01a(2022) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM D5917-15(2019) Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM D5917-15 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM D6475-06 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
ASTM D5917-02 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM B810-01a(2011) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM D5280-96(2001) Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM D8263/D8263M-23 Standard Test Method for Determining the Change in Mass of Rolled Erosion Control Products When Submerged in Water
ASTM D5917-15e1 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM D5280-96(2021) Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM A428/A428M-10(2014) Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM B810-01a(2006) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM B810-01a(2017) Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
ASTM D6525/D6525M-18 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
ASTM D6525/D6525M-16 Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
ASTM D5917-99 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
ASTM D1157-91(2004) Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
ASTM D1157-91(2009) Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
ASTM D1157-91(2014) Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
ASTM E747-97 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
ASTM D1157-23 Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons
ASTM A428/A428M-10(2019) Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM A428/A428M-21 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM A428/A428M-01 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM A428/A428M-95 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM D6567-18 Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP)
ASTM A90/A90M-11 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-13 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM D6567-17 Standard Test Method for Measuring the Light Penetration of a Rolled Erosion Control Product (RECP)
ASTM D6299-10 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM A90/A90M-95a(1999) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-01 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-21 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A90/A90M-13(2018) Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM D5472-93(1999)e1 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM E1910/E1910M-21 Standard Test Method for Agricultural pH Control Agents, Measurement of pH Change and Buffering Capacity
ASTM D586-19 Standard Test Method for Ash and Organic Matter Content of Degradable Erosion Control Products
ASTM E3324-22 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using Ultra-High-Performance Liquid Chromatography (UHPLC) with Triple Quadrupole Mass Spectrometry (TQMS)
ASTM D7274-06a Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)
ASTM D7274-06 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)
ASTM D7274-06a(2011) Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)
ASTM C1179-91(2010)e1 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM C1179-91(2005) Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
ASTM E1235-12(2020) Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM E1235-12(2020)e1 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
ASTM E2435-05 Standard Guide for Application of Engineering Controls to Facilitate Use or Redevelopment of Chemical-Affected Properties
ASTM D6023-02 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)
ASTM D6023-96 Standard Test Method for Unit Weight, Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low Strength Material (CLSM)

Japanese Industrial Standards Committee (JISC), Calibration Quality Control Methods

JIS Z 8754:1988 Mass-spectrometer-type leak-detector calibration
JIS B 9620-1:2000 Graphic technology -- Process control for the manufacture of half-tone colour separations, proof and production prints -- Part 1: Parameters and measurement methods

German Institute for Standardization, Calibration Quality Control Methods

DIN EN ISO 6145-7:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
DIN CEN ISO/TS 21805:2019-07*DIN SPEC 14039:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-7:2019-07 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018); German version EN ISO 6145-7:2018
DIN EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003); English version of DIN EN ISO 6145-1:2008-11
DIN EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009); German version EN ISO 6145-7:2010
DIN EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005); English version of DIN EN ISO 6145-8:2008-11
DIN EN ISO 23875:2022-09 Mining - Air quality control systems for operator enclosures - Performance requirements and test methods (ISO 23875:2021); German version EN ISO 23875:2022
DIN EN ISO 17511:2021 In vitro diagnostic medical devices - Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples (ISO 17511:2020); German version EN ISO 17511:2021
DIN 6856-2:1995 Film viewing boxes and viewing conditions - Part 2: Quality control in medical diagnostic; test method, measuring instruments
DIN EN ISO 6145-6:2017 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017)
DIN EN ISO 6145-6:2017-12 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017); German version EN ISO 6145-6:2017

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Calibration Quality Control Methods

GB/T 5750.3-2006 Standard examination methods for drinking water.Water analysis quality control
GB/T 5275.7-2014 Gas analysis.Preparation of calibration gas mixtures using dynamic volumetric methods.Part 7:Thermal mass-flow controllers
GB/T 27502-2011 Preparation method of reference solutions for the measurement of conductivity
GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers
GB/T 30119-2013 Preparation method of calibration solution for atomic absorption measurement
GB/T 5750.3-2023 Standard Examination Methods for Drinking Water Part 3: Water Analysis Quality Control
GB/T 27408-2010 Quality control in laboratories.Evaluating validity of non-standard test method.Practice for a linear relationship
GB/T 21415-2008 In vitro diagnostic medical devices.Measurement of quantities in biological samples.Metrological traceability of values assigned to calibrators and control materials
GB/T 32465-2015 Requirements for verification & validation of detection methods and internal quality control on chemical analysis
GB/T 19475.2-2004 Micrographics-Methods of measuring image quality produced by aperture card scanners-Part 2:Quality criteria and control
GB/T 36064-2018 Gravure printing process quality control and inspection methods for plastic flexible packaging
GB/T 32467-2015 Verification and validation of methods and internal quality contorl on chemical analysis.Terms and definitions
GB/T 18359-2001 General requirements and test methods of paper and printing qualities for primary and secondary school textbooks
GB/T 25934.2-2010 Methods for chemical analysis of high purity gold.Part 2: Inductively coupled plasma mass spectrometry standard enter emendation-inner standard method.Determination of impurity elements contents
GB/T 17294.2-1998 Micrographics--Alphanumeric computer output microforms--Quality control--Part 2: Method
GB/T 17294.2-2008 Micrographics.Alphanumeric computer output microforms.Quality control.Part 2:Method

Association of German Mechanical Engineers, Calibration Quality Control Methods

VDI 3490 Blatt 17-1998 Measurement of gases - Calibration gas mixtures - Dynamic preparation with thermal mass flow controllers
VDI 3490 Blatt 2-1980 Measurement of gases; calibration gas mixtures; preparation methods; general
VDI 2100 Blatt 4-2015 Gaseous ambient air measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds - Methods of preparing calibration gases and calibration solutions

国家市场监督管理总局、中国国家标准化管理委员会, Calibration Quality Control Methods

GB/T 17989.8-2022 Statistical method of quality control in production process—Control charts—Part 8：Charting techniques for short runs and small mixed batches
GB/T 17989.7-2022 Statistical method of quality control in production process—Control charts—Part 7: Multivariate control charts
GB/T 17989.5-2022 Statistical method of quality control in production process—Control charts—Part 5：Specialized control charts
GB/T 17989.9-2022 Statistical method of quality control in production process—Control charts—Part 9: Control charts for stationary processes
GB/T 41271-2022 Production process quality control—Communication conformance test
GB/T 17989.6-2022 Statistical method of quality control in production process—Control charts—Part 6: EWMA control charts

Danish Standards Foundation, Calibration Quality Control Methods

DS/EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers
DS/ISO 25337:2010 Plastics - Production quality control - Statistical method for using single measurements
DS/CEN/TS 15674:2008 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
DS/ISO 23875:2021 Mining – Air quality control systems for operator enclosures – Performance requirements and test methods
DS/ISO 12647-1:2011 Graphic technology - Process control for the production of half-tone colour separations, proof and production prints - Part 1: Parameters and measurement methods

IT-UNI, Calibration Quality Control Methods

CEN - European Committee for Standardization, Calibration Quality Control Methods

EN ISO 6145-7:2018 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers

Korean Agency for Technology and Standards (KATS), Calibration Quality Control Methods

KS I ISO 6145-7:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 7:Thermal mass-flow controllers
KS I ISO 6145-7:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS H ISO 8196-2:2021 Milk — Definition and evaluation of the overall accuracy of indirect methods of milk analysis — Part 2: Calibration and quality control in the dairy laboratory
KS I ISO 6145-1-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 1：Methods of calibration
KS H ISO 8196-2-2006(2016) Milk -- Definition and evaluation of the overall accuracy of indirect methods of milk analysis - Part 2: Calibration and quality control in the dairy laboratory
KS H ISO 8196-2:2006 Milk－Definition and evaluation of the overall accuracy of indirect methods of milk analysis－Part 2：Calibration and quality control in the dairy laboratory
KS X ISO 11698-2-2007(2012) Micrographics－Methods of measuring image quality produced by aperture card scanners－Part 2：Quality criteria and control
KS X ISO 11698-2:2007 Micrographics-Methods of measuring image quality produced by aperture card scanners-Part 2:Quality criteria and control
KS X ISO 11698-2:2013 Micrographics－Methods of measuring image quality produced by aperture card scanners－Part 2：Quality criteria and control
KS X ISO 12647-1-2006(2016) Graphic technology－Process control for the manufacture ofhalf-tone colour separations, proof and production prints－Part 1：Parameters and measurement methods
KS X ISO 12647-1-2006(2021) Graphic technology－Process control for the manufacture ofhalf-tone colour separations, proof and production prints－Part 1：Parameters and measurement methods
KS P 1018-2012(2017) The technology for gene expression analysis using DNA microarrays－Methods for isolation of genomic samples and quality control
KS X ISO 12647-1:2021 Graphic technology — Process control for the production of halftone colour separations, proof and production prints —Part 1: Parameters and measurement methods
KS X ISO 8514-2:2007 Micrographics-Alphanumeric computer output microforms-Quality control-Part 2:Method
KS X ISO 8514-2-2007(2012) Micrographics－Alphanumeric computer output microforms－Quality control－Part 2：Method
KS X ISO 8514-2:2013 Micrographics－Alphanumeric computer output microforms－Quality control－Part 2：Method
KS R ISO TS 14198:2019 Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems

European Committee for Standardization (CEN), Calibration Quality Control Methods

EN ISO 6145-7:2010 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
EN ISO 6145-1:2019 Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
EN ISO 6145-1:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)
EN ISO 6145-8:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005)
EN ISO 23875:2022 Mining - Air quality control systems for operator enclosures - Performance requirements and test methods (ISO 23875:2021)

CU-NC, Calibration Quality Control Methods

NC 92-09-2-1984 Quality Control. Methods for Selecting Random Samples
NC 00-40-1985 National System for Standardizaron, Metrology and Quality Control. Guide for Drawing-Up of Verification Methods and Means Standards
NC 92-17-1987 Quality Control. Comparison of Two Means in the Case of Paired Observations
NC 80-69-1987 Fish Industry. Shipbuilding Active Control Means for Ships. Ternas and Definitions
NC 92-50-1987 Quality Control. Reliability General Requirements for Reliability Eyaluation Methods of Technological Systems
NC 92-40-1985 Quality Control. Implementation of Statistioal Methods for Analyzing and Regulating Teohnological Processes and Aoceptance Inspection. General Principies

AT-ON, Calibration Quality Control Methods

ONORM S 2023-1993 Analytical methods and quality control of compost

Professional Standard - Machinery, Calibration Quality Control Methods

JB/T 8277-1999 Preparation method of standard solution for the measurement of conductivity meter
JB/T 9215-1999 Methods for controlling the image quality of radiographic testing
JB/T 9216-1999 Methods for controlling the quality of liquid penetrant materials
JB/T 9355-1999 Preparation method of calibration solution for the measurement of atomic absorption
JB/T 5232-1991 Method for preparing calibration solution for ion-selective electrode measurement

KR-KS, Calibration Quality Control Methods

KS H ISO 8196-2-2021 Milk — Definition and evaluation of the overall accuracy of indirect methods of milk analysis — Part 2: Calibration and quality control in the dairy laboratory
KS P 1018-2012(2022) The technology for gene expression analysis using DNA microarrays－Methods for isolation of genomic samples and quality control
KS X ISO 12647-1-2021 Graphic technology — Process control for the production of halftone colour separations, proof and production prints —Part 1: Parameters and measurement methods
KS R ISO TS 14198-2019 Road vehicles — Ergonomic aspects of transport information and control systems — Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems

NL-NEN, Calibration Quality Control Methods

NEN 2042-1982 Air quality — Preparation of calibration gas mixtures by means of permeation tubes
NEN 2038-1979 Air quality - Calibration gas mixture of nitrogen monoxide in nitrogen - Gravimetric preparation

CZ-CSN, Calibration Quality Control Methods

CSN 35 8578-1974 Methods of quality ccmtrol of screen of television picture tubes
CSN 01 0226-1980 Statistical quality eontrol. Methods of taking a random sample of diacrete items

PL-PKN, Calibration Quality Control Methods

PN M52021-1986 Dust collection plants Quality control and methods of testing

IN-BIS, Calibration Quality Control Methods

Military Standard of the People's Republic of China-General Armament Department, Calibration Quality Control Methods

GJB 7063-2010 Evaluation methods for the tracking and controlling quality of the space TT&C equipment

Lithuanian Standards Office , Calibration Quality Control Methods

LST EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)

AENOR, Calibration Quality Control Methods

UNE-EN ISO 6145-7:2011 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009)
UNE-CEN/TS 15674:2009 EX Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
UNE 135352:2006 Vertical signs and road delineators. "In situ" quality control. Characteristics and test methods.

机械电子工业部, Calibration Quality Control Methods

JB 5232-1991 Preparation method of calibration solution for ion selective electrode measurement

Indonesia Standards, Calibration Quality Control Methods

SNI 03-7016-2004 Sampling methods for water quality control in river flow area

GOSTR, Calibration Quality Control Methods

GOST R 57179-2016 Thermite welding of rails. Methods of testing and quality control
GOST R 59092-2020 Magnetic resonance equipment for medical imaging. Quality control of images. Test methods
GOST R 54607.1-2011 Public catering services. Methods of laboratory quality control of catering products. Part 1. Sampling and preparation for physical and chemical tests

American National Standards Institute （ANSI), Calibration Quality Control Methods

ANSI/ASQC B1-1985 Guide for Quality Control Charts, Method of Analyzing Data, and Controlling Quality during Production / Note: reaffirmation of ANSI/ASQC B1, B2, B3-1985 * Approved 1996-03-08.
ANSI/ASQC B2-1985 Guide for Quality Control Charts, Method of Analyzing Data, and Controlling Quality during Production / Note: reaffirmation of ANSI/ASQC B1, B2, B3-1985 * Approved 1996-03-08.
ANSI/ASQC B3-1985 Guide for Quality Control Charts, Method of Analyzing Data, and Controlling Quality during Production / Note: reaffirmation of ANSI/ASQC B1, B2, B3-1985 * Approved 1996-03-08.
ANSI N15.36-2010 American National Standard for Methods of Nuclear Material Control - Measurement Control Program - Nondestructive Assay Measurement Control and Assurance
ANSI/ASHRAE 41.10 ERTA-2021 Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters
ANSI/ASA S2.21-1998 Standard Method for Preparation of a Standard Material for Dynamic Mechanical Measurements
ANSI/ASHRAE 41.10-2013 Standard Methods for Volatile Refrigerant Mass Flow Measurement Using Flowmeters
ANSI/ISA 75.01.01-2012 Industrial-Process Control Valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions

ATIS - Alliance for Telecommunications Industry Solutions, Calibration Quality Control Methods

T1.TR.72-2003 Methodological Framework for Specifying Accuracy and Cross-Calibration of Video Quality Metrics

American Society of Mechanical Engineers (ASME), Calibration Quality Control Methods

ASME SEC V B SE-142-2002 Standard Method for Controlling Quality of Radiographic Testing ASTM E 142-92; DELETED

Professional Standard - Meteorology, Calibration Quality Control Methods

QX/T 676-2023 Atmospheric composition observation data quality control method acid rain

Standard Association of Australia （SAA）, Calibration Quality Control Methods

AS 3940:1990/Amdt 2:1993
AS 3940:1990/Amdt 1:1992
AS ISO 12647.1:2012 Graphic technology — Process control for the production of half-tone colour separations, proof and production prints, Part 1: Parameters and measurement methods
AS ISO 12647.1:2023 Graphic technology — Process control for the production of half-tone colour separations, proof and production prints, Part 1: Parameters and measurement methods

American Society of Quality Control （ASQC), Calibration Quality Control Methods

ASQ B1-B3-1996 Guide for Quality Control Charts Control Chart Method of Analyzing Data Control Chart Method of Controlling Quality During Production T59

International Dairy Federation (IDF), Calibration Quality Control Methods

IDF 128-2-2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 2: Calibration and quality control in the dairy laboratory

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Calibration Quality Control Methods

GB/T 36059-2018 Gravure printing process quality control and inspection methods for paper packaging
GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports
GB/T 35655-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography

TR-TSE, Calibration Quality Control Methods

TS 239-1976 THE STAT1STICAL QUALITY CONTROL METHODS AND DETERMINATION OF SAMPLE S?ZE ?N THE TEXTILE INDUSTRY

Professional Standard - Commodity Inspection, Calibration Quality Control Methods

SN/T 2990-2011 Quality control and quality evaluation. Index evaluation method of process and ability in testing laboratory
SN/T 1482-2004 Practice for laboratory internal quality control - MR pooled dynamic-ongoing-monitor technique

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Calibration Quality Control Methods

ASHRAE 41.9-2018 Standard Methods for Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.10-2013 Standard Methods for Refrigerant Mass Flow Measurement Using Flowmeters
ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Calibration Quality Control Methods

ASHRAE 41.10 ERTA-2021 Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters

International Telecommunication Union (ITU), Calibration Quality Control Methods

ITU-T J.149 SPANISH-2004 Method for specifying accuracy and cross-calibration of Video Quality Metrics (VQM)
ITU-T J.149 FRENCH-2004 Method for specifying accuracy and cross-calibration of Video Quality Metrics (VQM)
ITU-T J.145 FRENCH-2001 Measurement and control of the quality of service for sound transmission over contribution and distribution networks
ITU-T J.145 SPANISH-2001 Measurement and control of the quality of service for sound transmission over contribution and distribution networks

中国气象局, Calibration Quality Control Methods

QX/T 510-2019 Atmospheric composition observation data quality control method Reactive gases

Heilongjiang Provincial Standard of the People's Republic of China, Calibration Quality Control Methods

DB23/T 3462-2023 Quarry tailings machine-made sand quality and inspection method standard

The American Road & Transportation Builders Association, Calibration Quality Control Methods

AASHTO T 213M/T 213-2011 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
AASHTO T 213M/T 213-2008 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
AASHTO T 65M/T 65-2013 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

AASHTO - American Association of State Highway and Transportation Officials, Calibration Quality Control Methods

T 213M/T 213-2008 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
T 213M/T 213-2011 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
T 213M/T 213-2003 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles
T 65M/T 65-2006 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2008 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2011 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 65M/T 65-2013 Standard Method of Test for Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
T 213M/T 213-1997 Standard Method of Test for Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles (Twentieth Edition; ASTM A428/A428M-95)

Chongqing Provincial Standard of the People's Republic of China, Calibration Quality Control Methods

DB50/T 203-2005 Printing quality standards and inspection methods for primary and secondary school workbooks

International Electrotechnical Commission (IEC), Calibration Quality Control Methods

IEC 60996:1989 Method for verifying accuracy of tan delta measurements applicable to capacitors
IEC 60534-2-1:2011 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions
IEC 60534-2:1978 Industrial-process control valves. Part 2: Section one - Sizing equations for incompressible fluid flow under installed conditions

Professional Standard - Medicine, Calibration Quality Control Methods

YY/T 0638-2008 In vitro diagnostic medical devices.Measurement of quantities in biological samples.Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials

Professional Standard - Agriculture, Calibration Quality Control Methods

农业部630号公告-11-2006 Technical guidelines for validation of analytical methods for quality control of veterinary chemicals

ETSI - European Telecommunications Standards Institute, Calibration Quality Control Methods

EG 201 014-1997 Methods for Testing and Specification (MTS); ETSI Standards-Making; Technical Quality Criteria for Telecommunications Standards (V1.1.1)
ETR 304-1996 Methods for Testing and Specification (MTS); The Future in ETSI of Quality of Standards-Making@ Validation and Testing

European Telecommunications Standards Institute (ETSI), Calibration Quality Control Methods

ETSI TS 103801 V 1.1.1-2020 Speech and multimedia Transmission Quality (STQ) - Subjective test methodologies for the evaluation of echo control systems
ETSI TS 103 801-2020 Speech and multimedia Transmission Quality (STQ); Subjective test methodologies for the evaluation of echo control systems (V1.1.1)
ETSI EG 201 014-1997 Methods for Testing and Specification (MTS); ETSI Standards-Making; Technical Quality Criteria for Telecommunications Standards

Professional Standard - Press and Publication, Calibration Quality Control Methods

CY/T 226.1-2020 Quality Control Requirements and Inspection Methods for Cosmetic Packaging and Printed Matters Part 1: Paper Packaging
CY/T 226.2-2020 Quality Control Requirements and Inspection Methods for Cosmetic Packaging and Printed Matters Part 2: Tube Packaging

国家认证认可监督管理委员会, Calibration Quality Control Methods

RB/T 141-2018 Measurement uncertainty assessment in the field of chemical detection uses quality control and method validation data to assess uncertainty

SE-SIS, Calibration Quality Control Methods

SIS SS-ISO 8514-2:1992 Micrographics — Alphanumeric computer output microforms — Quality control — Part 2: Method