ZH
RU
ES
Standard Particle Analysis Methods
Standard Particle Analysis Methods, Total:500 items.
In the international standard classification, Standard Particle Analysis Methods involves: Rubber and plastics products, Road vehicles in general, Construction materials, Fuels, Domestic, commercial and industrial heating appliances, Medical equipment, Products of the chemical industry, Air quality, Particle size analysis. Sieving, Soil quality. Pedology, Pesticides and other agrochemicals, Elements of buildings, Geology. Meteorology. Hydrology, Paints and varnishes, Raw materials for rubber and plastics, Environmental protection, Paint ingredients, Lubricants, industrial oils and related products, Nuclear energy engineering, Water quality, Analytical chemistry, Clothes, Inks. Printing inks, Structures of buildings, Optics and optical measurements, Plastics, Welding, brazing and soldering, Testing of metals, Non-ferrous metals, Road engineering, Refractories, Petroleum products in general, Tobacco, tobacco products and related equipment, Rubber, Civil engineering in general, Cereals, pulses and derived products, Earthworks. Excavations. Foundation construction. Underground works, Metalliferous minerals, Semiconducting materials, Milk and milk products, Valves, Internal combustion engines, Hydraulic fluids, Powder metallurgy, Sports equipment and facilities, Protective equipment, General methods of tests and analysis for food products, Linear and angular measurements, Ceramics, Food products in general, Products of the textile industry, Mechanical testing, Physics. Chemistry, Farming and forestry, Leather technology, Sterilization and disinfection, Components for aerospace construction, Natural gas.
American Society for Testing and Materials (ASTM), Standard Particle Analysis Methods
- ASTM E871-82(1998) Standard Method of Moisture Analysis of Particulate Wood Fuels
- ASTM D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D422-63(2007)e1 Standard Test Method for Particle-Size Analysis of Soils
- ASTM D422-63(1998) Standard Test Method for Particle-Size Analysis of Soils
- ASTM E871-82(2019) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
- ASTM E872-82(1998) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
- ASTM E872-82(2019) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
- ASTM E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
- ASTM D451-91(1996)e1 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
- ASTM D451/D451M-17 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
- ASTM E2524-08 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
- ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D8108-21e1 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
- ASTM D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM D7486-08(2013)e1 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
- ASTM E2779-10 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
- ASTM D4791-05 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4791-05e1 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4791-99 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4791-10 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM E725-96(2020) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
- ASTM E725-96 Standard Test Method for Sampling Granular Carriers and Granular Pesticides
- ASTM E725-96(2001) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
- ASTM E725-96(2021) Standard Test Method for Sampling Granular Carriers and Granular Pesticides
- ASTM E1520-23 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
- ASTM D6225-98e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
- ASTM D6225/D6225M-98(2020) Standard Test Method for Granule Cover of Mineral-Surfaced Roofing
- ASTM C123/C123M-14 Standard Test Method for Lightweight Particles in Aggregate
- ASTM D2862-10 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
- ASTM D2862-16 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
- ASTM D4791-19 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM D4791-19(2023) Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
- ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
- ASTM E2316-14(2019)e1 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
- ASTM D6913-04(2009)e1 Standard Test Methods for Particle-Size Distribution 40;Gradation41; of Soils Using Sieve Analysis
- ASTM D8090-17 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
- ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
- ASTM E728-91(1997) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
- ASTM E728-91(2015) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
- ASTM E728-91(2020) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
- ASTM D1511-00e2 Standard Test Method for Carbon Black-Pellet Size Distribution
- ASTM D1511-12(2023) Standard Test Method for Carbon Black—Pellet Size Distribution
- ASTM D6225-98 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
- ASTM D6225-98(2004) Standard Test Method for Granule Cover of Mineral Surfaced Roofing
- ASTM D6225/D6225M-98(2012)e1 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
- ASTM D1508-23 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
- ASTM E726-01(2011)e1 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
- ASTM E726-01(2015) Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
- ASTM D185-07(2012) Standard Test Methods for Coarse Particles in Pigments
- ASTM D185-07(2023) Standard Test Methods for Coarse Particles in Pigments
- ASTM D185-07(2019) Standard Test Methods for Coarse Particles in Pigments
- ASTM D185-07 Standard Test Methods for Coarse Particles in Pigments
- ASTM D8120-17 Standard Test Method for Ferrous Debris Quantification
- ASTM D3685/D3685M-13(2021) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
- ASTM E1288-89(1994) Standard Test Method for The Durability of Biomass Pellets (Withdrawn 2003)
- ASTM E1520-99(2009) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
- ASTM C697-16 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
- ASTM D4822-88(2003) Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
- ASTM D4822-88(1999) Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
- ASTM D4822-88(2019) Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
- ASTM D422-63(2007) Standard Test Method for Particle-Size Analysis of Soils
- ASTM D422-63(2007)e2 Standard Test Method for Particle-Size Analysis of Soils
- ASTM D1508-99 Standard Test Method for Carbon Black, Pelleted-Fines and Attrition
- ASTM C123/C123M-11 Standard Test Method for Lightweight Particles in Aggregate
- ASTM D3466-06(2011) Standard Test Method for Ignition Temperature of Granular Activated Carbon
- ASTM D1508-12(2017) Standard Test Method for Carbon Black, Pelleted Fines and Attrition
- ASTM E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
- ASTM E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
- ASTM E873-82(2019) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
- ASTM E2558-13 Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
- ASTM D1739-98(2017) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
- ASTM F51/F51M-00(2007)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM E727/E727M-08(2013)e1 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727-91(1998) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727-02 Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- ASTM D4822-88(2008) Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)
- ASTM F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM F51-00 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM D2067-97(2008) Standard Test Method for Coarse Particles in Printing Ink Dispersions
- ASTM D2067-97(2008)e1 Standard Test Method for Coarse Particles in Printing Ink Dispersions
- ASTM D2067-97(2013) Standard Test Method for Coarse Particles in Printing Ink Dispersions
- ASTM D8127-17 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
- ASTM E2515-11 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
- ASTM E2780-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
- ASTM D4600-95(2016) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
- ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
- ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
- ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
- ASTM D1937-98e1 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
- ASTM D6290-05e1 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D6290-18 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D1937-98 Standard Test Method for Carbon Black, Pelleted-Mass Strength
- ASTM D6290-98e1 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D1513-05(2023) Standard Test Method for Carbon Black, Pelleted—Pour Density
- ASTM D6290-19 Standard Test Method for Color Determination of Plastic Pellets
- ASTM D1937-12 Standard Test Method for Carbon Black, Pelleted—Mass Strength
- ASTM D1937-23 Standard Test Method for Carbon Black, Pelleted—Mass Strength
- ASTM D1937-21 Standard Test Method for Carbon Black, Pelleted—Mass Strength
- ASTM D1937-13 Standard Test Method for Carbon Black, Pelletedmdash;Mass Strength
- ASTM D4822-88(2014) Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments 40;Manual Methods41;
- ASTM D8108-21 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
- ASTM D8108-20 Standard Test Method for Determination of Particulate Matter Mass from Light Duty Mobile Sources (Gravimetric Method)
- ASTM D3268-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
- ASTM D3268-91(2018) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
- ASTM E872-82(2013) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
- ASTM D6217-10 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
- ASTM D6217-11 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
- ASTM D5821-01(2006) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5821-95 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5821-01 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM E1534-93(2013) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
- ASTM E1534-93(2019) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
- ASTM F51/F51M-00(2014)e1 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
- ASTM E255-91(1997) Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
- ASTM E2558-08 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
- ASTM E2515-10 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
- ASTM E2558-13(2021) Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
- ASTM D4600-22 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
- ASTM D1513-05 Standard Test Method for Carbon Black, Pelleted8212;Pour Density
- ASTM D1513-99a(2004) Standard Test Method for Carbon Black, Pelleted8212;Pour Density
- ASTM D1513-04 Standard Test Method for Carbon Black, Pelleted8212;Pour Density
- ASTM D1937-05 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
- ASTM D1513-05(2012) Standard Test Method for Carbon Black, Pelletedmdash;Pour Density
- ASTM D4977/D4977M-20 Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion
- ASTM D4699-03 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
- ASTM D4699-03(2013) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM E2316-03(2014) Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides
- ASTM D6933-18 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
- ASTM D6933-22 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
- ASTM D5821-13 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D5821-13(2017) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
- ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
- ASTM D4600-95(2005) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
- ASTM D4600-95(2010) Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
- ASTM E2515-07 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
- ASTM E2515-11(2017) Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
- ASTM D7634-10(2017) Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
- ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM D1921-01 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM E871-82(2006) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
- ASTM D1921-96 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM D1921-06 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM E871-82(2013) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
- ASTM D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM D4977-98b Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
- ASTM D4977-03 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
- ASTM C492-92(2017) Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
- ASTM D3313-04 Standard Test Method for Carbon Black-Individual Pellet Hardness
- ASTM D3313-05 Standard Test Method for Carbon Black8212;Individual Pellet Hardness
- ASTM D3313-05a Standard Test Method for Carbon Black8212;Individual Pellet Hardness
- ASTM E1521-01(2006) Standard Test Method for Liquid Holding Capacity of Granular Carriers
- ASTM D6791-06 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
- ASTM D5230-19 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
- ASTM D2338-02(2007) Standard Test Method for Determining Particle Size of Multicolor Lacquers
- ASTM D2338-02 Standard Test Method for Determining Particle Size of Multicolor Lacquers
- ASTM D2338-84(1996)e1 Standard Test Method for Determining Particle Size of Multicolor Lacquers
- ASTM E1521-01 Standard Test Method for Liquid Holding Capacity of Granular Carriers
- ASTM E1521-93(1998) Standard Test Method for Liquid Holding Capacity of Granular Carriers
- ASTM D5230-09e1 Standard Test Method for Carbon Black&8212;Automated Individual Pellet Hardness
- ASTM D5230-12 Standard Test Method for Carbon Blackmdash;Automated Individual Pellet Hardness
- ASTM D5230-09 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D5230-12a Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
- ASTM D6791-02 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
- ASTM D1404/D1404M-99(2003) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
- ASTM D1404/D1404M-99(2019) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
- ASTM E1521-19 Standard Test Method for Liquid Holding Capacity of Granular Carriers
- ASTM D5230-21 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
- ASTM D3313-12 Standard Test Method for Carbon Blackmdash;Individual Pellet Hardness
- ASTM C520-15 Standard Test Methods for Density of Granular Loose Fill Insulations
- ASTM C142/C142M-17 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
- ASTM D2338-02(2013) Standard Test Method for Determining Particle Size of Multicolor Lacquers
- ASTM D5230-14e1 Standard Test Method for Carbon Black&x2014;Automated Individual Pellet Hardness
- ASTM D8358-21 Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
- ASTM D6494-22 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
- ASTM D6786-02 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
- ASTM D7619-22 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
- ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
- ASTM D5644-01(2008) Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
- ASTM D4600-95(2000)e1 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres
- ASTM D5627-94(2004) Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
- ASTM D5627-94(1998) Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
- ASTM D5627-94(2009) Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
- ASTM D4977/D4977M-03(2019) Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
- ASTM D5627-94(2009)e1 Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
- ASTM D5627-17 Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins
- ASTM D6217-18 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
- ASTM E1534-93(1998) Standard Test Method for Determination of ASH Content of Particulate Wood Fuels
- ASTM D6217-11(2016) Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration
- ASTM D6986-03(2016) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
- ASTM D5452-05 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
- ASTM D5452-12 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
- ASTM D4096-17 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
- ASTM D4096-17(2017) Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)
- ASTM D4977/D4977M-03(2013)e1 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
- ASTM D5444-98 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
- ASTM E2524-22 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
- ASTM E2524-08(2013) Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
- ASTM D451/D451M-17(2022) Standard Test Method for Sieve Analysis of Granular Mineral Surfacing for Asphalt Roofing Products
- ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
- ASTM C357-94(2002)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
- ASTM D2434-68(2000) Standard Test Method for Permeability of Granular Soils (Constant Head)
- ASTM D3398-00 Standard Test Method for Index of Aggregate Particle Shape and Texture
- ASTM D3398-00(2006) Standard Test Method for Index of Aggregate Particle Shape and Texture
- ASTM C357-94(1998) Standard Test Method for Bulk Density of Granular Refractory Materials
- ASTM C357-07(2015) Standard Test Method for Bulk Density of Granular Refractory Materials
- ASTM E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM C142/C142M-17(2023) Standard Test Method for Clay Lumps and Friable Particles in Aggregates
- ASTM D5644-96 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Vulcanized Particulate Rubber
- ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
- ASTM E3053-18e2 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
- ASTM F1394-92(1999) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
- ASTM F1394-92(2020) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
- ASTM D4749-87 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
- ASTM D7596-23 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
- ASTM D7596-14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
- ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
- ASTM D451-91(2008) Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
- ASTM D451/D451M-91(2013)e1 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
- ASTM D452/D452M-91(2013)e1 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
- ASTM D4781-03 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM D6494-99(2010) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
- ASTM D6494-99(2015) Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
- ASTM C697-10 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
- ASTM D8127-23 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
- ASTM D5444-05 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
- ASTM D5444-08 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
- ASTM D5444-15 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
- ASTM D5644-01(2013) Standard Test Methods for Rubber Compounding Materialsmdash;Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
- ASTM D4699-99 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
- ASTM E382-07 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM D3466-76(1998) Standard Test Method for Ignition Temperature of Granular Activated Carbon
- ASTM D4699-03(2008) Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
- ASTM D2489/D2489M-16 Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures
- ASTM D6791-22 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
- ASTM D3466-06(2018) Standard Test Method for Ignition Temperature of Granular Activated Carbon
- ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
- ASTM C544-03 Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
- ASTM C544-92(1998)e1 Standard Test Method for Hydration of Magnesite or Periclase Grain
- ASTM C544-03(2008) Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
- ASTM C544-03(2017) Standard Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain
- ASTM C544-18 Standard Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain
- ASTM C544-03(2013) Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
- ASTM D7596-10 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
- ASTM D7439-08 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmax2013;Mass Spectrometry
- ASTM E3053-17 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
- ASTM E3053-18e1 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
- ASTM E3053-18 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
- ASTM D8489-23e1 Standard Test Method for Determination of Microplastics Particle and Fiber Size, Distribution, Shape, and Concentration in Waters with High to Low Suspended Solids Using a Dynamic Image Particle Size
- ASTM E1358-97(2019) Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
- ASTM D1921-12 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM D1921-06e1 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
- ASTM D4176-21 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D4176-04e1 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D4176-04 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D4176-93(1997) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D4176-02 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D4176-22 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D4176-04(2009) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D4176-04(2014) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- ASTM D8127-17e1 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
- ASTM B930-03(2017) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
- ASTM D5644-18 Standard Test Method for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
- ASTM D5644-01 Standard Test Methods for Rubber Compounding Materials8212Determination of Particle Size Distribution of Recylced Vulcanizate Particulate Rubber
- ASTM D5644-01(2008)e1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
- ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
- ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
- ASTM F1632-03(2010) Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
- ASTM D5519-94(2001) Standard Test Method for Particle Size Analysis of Natural and Man-Made Riprap Materials
- ASTM D5519-94 Standard Test Method for Particle Size Analysis of Natural and Man-Made Riprap Materials
- ASTM D5519-07 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
- ASTM D7647-10 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
- ASTM C142-97 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
- ASTM D5230-05 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM C142-97(2004) Standard Test Method for Clay Lumps and Friable Particles in Aggregates
- ASTM D5230-04e1 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D5230-04 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM C142/C142M-10 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
- ASTM D6791-11 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
- ASTM F24-09(2015) Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
- ASTM F24-20 Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
- ASTM D6986-03(2020) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
- ASTM D7439-21 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
- ASTM E2558-07 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
- ASTM D7650-13 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
- ASTM C1182-91(1995) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
- ASTM C1182-09(2019) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
- ASTM C1182-09(2014) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
- ASTM D3266-91(2000)e1 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
- ASTM D3267-20 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
- ASTM D3266-91(2018) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
- ASTM D3267-12 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)
- ASTM D7928-16 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- ASTM E1520-99 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
- ASTM E1520-99(2004) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
- ASTM E1520-99(2015) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
- ASTM D6494-99 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
- ASTM D6494-99(2004)e1 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
- ASTM D4749-87(2002)e1 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
- ASTM D4749-87(2002) Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
- ASTM D4749-87(2012) Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
- ASTM C968-12 Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets
- ASTM D4749-87(2007) Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
- ASTM D5519-14 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
- ASTM D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
- ASTM D7439-14 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasmandash;Mass Spectrometry
- ASTM D6650-01 Standard Test Method for Determining the Dynamic Wiping Efficiency, Wet Particle Removal Ability, and Fabric Particle Contribution of Nonwoven Fabrics Used in Cleanrooms
- ASTM D6175-98 Standard Test Method for Radial Crush Strength of Extruded Catalyst Particles
- ASTM D3685/D3685M-98(2005) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
- ASTM D3685/D3685M-98 Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
- ASTM D5452-20 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
- ASTM D3685/D3685M-13 Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
- ASTM D5230-13 Standard Test Method for Carbon Blackmdash;Automated Individual Pellet Hardness
- ASTM D6271-10 Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol
- ASTM E389-03 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials
- ASTM E3269-21 Standard Test Method for Determination of the Mass Fraction of Particle-Bound Gold in Colloidal Gold Suspensions
- ASTM D4860-07 Standard Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating)
- ASTM D7928-21 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- ASTM D7928-16e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- ASTM D7928-21e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- ASTM D7928-17 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
- ASTM E2396-11 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems
- ASTM E2396/E2396M-19 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems
- ASTM E276-98 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials
- ASTM C809-19 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets
- ASTM E3340-22 Standard Guide for Development of Laser Diffraction Particle Size Analysis Methods for Powder Materials
- ASTM D6986-03(2010) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
- ASTM D2210-21 Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test
- ASTM D5230-00e2 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D5230-00e1 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D5230-00 Standard Test Method for Carbon Black-Automated Individual Pellet Hardness
- ASTM D5230-03 Standard Test Method for Carbon Black8212;Automated Individual Pellet Hardness
- ASTM D6646-03(2008) Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
- ASTM D5230-10 Standard Test Method for Carbon Black&8212;Automated Individual Pellet Hardness
- ASTM D6933-13 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
- ASTM D2434-68(2006) Standard Test Method for Permeability of Granular Soils (Constant Head)
- ASTM D5230-14 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
- ASTM D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
- ASTM F311-08(2013) Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
- ASTM D7619-10 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
The American Road & Transportation Builders Association, Standard Particle Analysis Methods
- AASHTO T311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials Twentieth Edition
- AASHTO T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials
- AASHTO T 27-2011 Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates
- AASHTO T 27-2014 Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates
- AASHTO T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
- AASHTO T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
- AASHTO T 311-2000(R2010) Standard Method of Test for Grain-Size Analysis of Granular Soil Materials
- AASHTO T 30-2008 Standard Method of Test for Mechanical Analysis of Extracted Aggregate
- AASHTO T88-2000 Standard Method of Test for Particle Size Analysis of Soils Twentieth Edition
- AASHTO T 215-1970(R2007) Standard Method of Test for Permeability of Granular Soils (Constant Head)
- AASHTO T 215-2014 Standard Method of Test for Permeability of Granular Soils (Constant Head)
- AASHTO T 112-2021 Standard Method of Test for Clay Lumps and Friable Particles in Aggregate
- AASHTO T 224-2010 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
- AASHTO T 195-1967(R2007) Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
- AASHTO T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
Japanese Industrial Standards Committee (JISC), Standard Particle Analysis Methods
- JIS Z 8829:2021 Particle size analysis -- Particle tracking analysis (PTA) method
- JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
BR-ABNT, Standard Particle Analysis Methods
AASHTO - American Association of State Highway and Transportation Officials, Standard Particle Analysis Methods
- T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials (Twentieth Edition)
- T 27-2014 Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates
- T 27-2006 Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates
- T 27-2011 Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates
- T 88-2013 Standard Method of Test for Particle Size Analysis of Soils
- T 88-2010 Standard Method of Test for Particle Size Analysis of Soils
- T 88-2000 Standard Method of Test Particle Size Analysis of Soils
- T88-1993 Standard Method of Test for Particle Size Analysis of Soils
- T 113-2018 Standard Method of Test for Lightweight Particles in Aggregate
- T88-2000 Standard Method of Test for Particle Size Analysis of Soils (Twentieth Edition)
- T 215-2014 Standard Method of Test for Permeability of Granular Soils (Constant Head)
- T 112-2000 Standard Method of Test for Clay Lumps and Friable Particles in Aggregate
- T 224-2010 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
- T 224-2001 Standard Method of Test for Correction for Coarse Particles in the Soil Compaction Test
- T 195-2018 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
- T 195-2011 Standard Method of Test for Determining Degree of Particle Coating of Asphalt Mixtures
British Standards Institution (BSI), Standard Particle Analysis Methods
- BS ISO 14411-2:2020 Preparation of particulate reference materials - Polydisperse spherical particles
- 19/30380724 DC Preparation of particulate reference materials — Part 2: Polydisperse spherical particles. Part 2. Polydisperse spherical particles
- PD ISO/TS 14411-1:2017 Preparation of particulate reference materials. Polydisperse material based on picket fence of monodisperse spherical particles
- BS ISO 15592-3:2009 Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and ni
- BS ISO 15592-3:2008 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and
- BS 1743-19:1985 Methods for analysis of dried milk and dried milk products - Determination of scorched particles content
- BS EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
- BS EN 14902:2005(2009) Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter
- BS EN 1015-1:1999 Methods of test for mortar for masonry - Determination of particle size distribution (by sieve analysis)
- BS 5540-6:1990 Evaluating particulate contamination of hydraulic fluids - Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres)
Xinjiang Provincial Standard of the People's Republic of China, Standard Particle Analysis Methods
- DB65/T 602.12-2001 The determinanation of soil particle-size composition(mechanical composition
RO-ASRO, Standard Particle Analysis Methods
International Organization for Standardization (ISO), Standard Particle Analysis Methods
- ISO 14411-2:2020 Preparation of particulate reference materials — Part 2: Polydisperse spherical particles
- ISO 15592-3:2008 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of wa
- ISO 15592-3:2003 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of wa
- ISO 15592-3:2022 Fine-cut tobacco and smoking articles made from it — Methods of sampling, conditioning and analysis — Part 3: Determination of total particulate matter of smoking articles using a routine analytical s
- ISO 728:1995 Coke (nominal top size greater than 20 mm) - Size analysis by sieving
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard Particle Analysis Methods
- GB/T 29024.3-2012 Determination of particle size distribution.Single particle light interaction methods.Part 3:Light extinction liquid-borne particle counter
- GB/T 29024.2-2016 Determination of particle size distribution.Single particle light interaction methods.Part 2:Light scattering liquid-borne particle counter
- GB/T 6609.37-2009 Chemical analysis methods and determination of physical performance of alumina-Part 37: Determination of the particles size content less than 20μm
- GB/T 6609.27-2004 Chemical analysis methods and determination of physical performance of alumina Particle size analysis-Sieving method
- GB/T 6609.27-2023 Methods of chemical analysis and determination of physical properties of alumina Part 27: Particle size analysis and sieving method
- GB/T 6609.27-2009 Chemical analysis methods and determination of physical performance of alumina.Part 27:Partical size analysis.Method using electriformed sieves
- GB/T 5009.37-2003 Method for analysis of hygienic standard of edible oils
Professional Standard - Meteorology, Standard Particle Analysis Methods
- QX/T 72-2007 Determination of number size distribution of submicron particle by using Electrical Mobility Method
Association of German Mechanical Engineers, Standard Particle Analysis Methods
- VDI 2268 Blatt 3-1988 Chemical analysis of particulate matter; determination of thallium in particulate emissions by atomic absorption spectrometry
- VDI 2268 Blatt 1-1987 Chemical analysis of particulate matter; determination of Ba, Be, Cd, Co, Cr, Cu, Ni, Pb, Sr, V, Zn in particulate emissions by atomic spectrometric methods
- VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
- VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
Standard Association of Australia （SAA）, Standard Particle Analysis Methods
- AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
- AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
- AS/NZS 3580.10.2:2013
- AS/NZS 3580.9.17:2018 Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods
- AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
- AS/NZS 3580.9.12:2022 Methods for sampling and analysis of ambient air, Method 9.12: Determination of suspended particulate matter — PM2.5 beta attenuation monitors
- AS/NZS 3580.9.11:2022 Methods for sampling and analysis of ambient air, Method 9.11: Determination of suspended particulate matter — PM10 beta attenuation monitors
- AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
- AS/NZS 3580.9.11:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 beta attenuation monitors
- AS/NZS 3580.9.12:2013
- AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
- AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
- AS/NZS 3580.9.7:2009
- AS 1289.3.5.1:1995 Methods of testing soils for engineering purposes Method 3.5.1: Soil classification tests-Determination of the soil particle density of a soil-Standard method
- AS 3580.9.8:2001 Methods for sampling and analysis of ambient air Method 9.8: Determination of suspended particulate matter--PM continuous direct mass method using a tapered element oscillating microbalance analyser
- AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
- AS 3580.13.3:1993 Methods for sampling and analysis of ambient air Method 13.3: Determination of fluorides-Total gaseous and acid-soluble airborne particulate fluoride-Sodium acetate coated tube absorption
- AS/NZS 3580.9.15:2014
CZ-CSN, Standard Particle Analysis Methods
CU-NC, Standard Particle Analysis Methods
- NC 93-02-221-1986 Standards System for Environmental Protection. Atmosphere. Gravimetric Determination of Float Dust
Professional Standard - Construction Industry, Standard Particle Analysis Methods
- JG/T 5066-1996 Determination of solid particulate contaminant in fluids by the gravimetric method
未注明发布机构, Standard Particle Analysis Methods
- JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
- BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
German Institute for Standardization, Standard Particle Analysis Methods
- DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
- DIN 50452-2:2009-10 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 2: Determination of particles by optical particle counters
- DIN 50452-1:1995-11 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles
- DIN EN 14902:2005-10 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005
- DIN EN 14902 Berichtigung 1:2007-01 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; German version EN 14902:2005, Corrigenda to DIN EN 14902:2005-10; German version EN 14902:2005/AC:2006
- DIN 50452-2:1991 Testing of materials for semiconductor technology; test method for particle analysis in liquids; determination of particles with optical particle counters
- DIN EN 15415-3:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
- DIN EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter; English version of DIN EN 14902
- DIN ISO 15592-3:2011 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of wa
- DIN-Fachbericht 82:1999 Food analysis - Biotoxins - Criteria of analytical methods of mycotoxins; trilingual edition of CR 13505:1999
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Standard Particle Analysis Methods
European Committee for Standardization (CEN), Standard Particle Analysis Methods
- EN 1744-1:2009 Tests for chemical properties of aggregates - Part 1: Chemical analysis (Incorporates Amendment A1: 2012)
- CEN/TS 17458:2020 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
- PD CEN/TS 17458:2020 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
- EN 12341:2023 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
- EN 12341:1998 Air Quality - Determination of the PM10 Fraction of Suspended Particulate Matter - Reference Method and Field Test Procedure to Demonstrate Reference Equivalence of Measurement Methods
- EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
CEN - European Committee for Standardization, Standard Particle Analysis Methods
- PD CEN/TS 15210-1:2005 Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets
IN-BIS, Standard Particle Analysis Methods
American National Standards Institute （ANSI), Standard Particle Analysis Methods
- ANSI/ASTM D1921:2001 Particle Size (Sieve Analysis) of Plastic Materials, Standard Test Method for (08.02)
Underwriters Laboratories (UL), Standard Particle Analysis Methods
- UL 2904 BULLETIN-2023 UL Standard for Safety Standard Method for Testing and Assessing Particle and Chemical Emissions from 3D Printers
ES-UNE, Standard Particle Analysis Methods
- UNE-EN 14902:2006/AC:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
Association Francaise de Normalisation, Standard Particle Analysis Methods
- NF EN 14902:2005 Qualité de l'air ambiant - Méthode normalisée pour la mesure du plomb, cadmium, de l'arsenic et du nickel dans la fraction MP10 de la matière particulaire en suspension
- NF X43-026*NF EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter.
- NF V37-043-3*NF ISO 15592-3:2009 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 3 : determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of w
- XP T47-752:2007 End of Life Tyres (ELF) - Determination of the particle size analysis of granulates issued from End of Life Tyres - Method based on the mechanical sieving of product
- XP X43-458*XP CEN/TS 17458:2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
- FD ISO/TR 17623:2015 Analyse moléculaire de biomarqueurs - Méthode d'analyse SSR sur le maïs
- NF ISO 15592-3:2023 Tabac à rouler et objets confectionnés à partir de ce type de tabac - Méthodes d'échantillonnage, de conditionnement et d'analyse - Partie 3 : Dosage de la matière particulaire totale des objets à fumer au moyen d'une machine à fumer analyti...
- NF EN 12341:2014 Air ambiant - Méthode normalisée de mesurage gravimétrique pour la détermination de la concentration massique MP10 ou MP2,5 de matière particulaire en suspension
Korean Agency for Technology and Standards (KATS), Standard Particle Analysis Methods
- KS H ISO 15592-3-2013(2018) Fine-cut tobacco and smoking articles made from it－Methods of sampling, conditioning and analysis－Part 3：Determination of total particulate matter of smoking articles using a routine analytical smokin
- KS F 2575-2013(2018) Standard test method for flat or elongated particles in coarse aggregate
- KS F 2340-2014 Standard test method for sand equivalent value of granular soils and fine aggregates
- KS F 2516-2014 Standard test method for content of soft particles in coarse aggregate by scratching
- KS F 2516-2014(2020) Standard test method for content of soft particles in coarse aggregate by scratching
- KS F 2341-2007(2017) Standard method for wet preparation of soil samples for particle size analysis and determination of soil constants
- KS I ISO 24094-2010(2016) Analysis of natural gas－Validation methods for gaseous reference materials
ZA-SANS, Standard Particle Analysis Methods
- SANS 3001-AG1:2009 Civil engineering test methods Part AG1: Particle size analysis of aggregates by sieving
- SANS 3001-GR2:2009 Civil engineering test methods Part GR2: Dry preparation and dry particle size analysis of graded materials
RU-GOST R, Standard Particle Analysis Methods
- GOST R 55552-2013 Solid recovered fuels. Determination of particle size distribution. Part 3. Method by image analysis for large dimension particles
- GOST 33583-2015 Granular activated carbon. Standard method for determination of dusting attrition
- GOST 32520-2013 Iron ores, concentrates, agglomerates and pellets. General requirements to the methods of chemical analyses
- GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Standard Particle Analysis Methods
- GB/T 29024.4-2017 Determination of particle size distribution－Single particle light interaction methods－Part 4: Light scattering airborne particle counter for clean spaces
Society of Automotive Engineers (SAE), Standard Particle Analysis Methods
- SAE TS64-2-2004 TS64 Standard Method for Microscopic Evaluation of Hydraulic Fluid Samples for Particle Contamination
KR-KS, Standard Particle Analysis Methods
AENOR, Standard Particle Analysis Methods
- UNE-EN 14902:2006 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
- UNE-CR 13505:2003 Food analysis. Biotoxins. Criteria of analytical methods of mycotoxins.
Danish Standards Foundation, Standard Particle Analysis Methods
- DS/EN 14902/AC:2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
- DS/EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
- DS/CEN/TS 17458:2021 Ambient air – Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
- DS/EN ISO 13982-2:2005 Protective clothing for use against solid particulates - Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
- DS/CEN/CR 13505:1999 Food analysis - Biotoxins - Criteria for analytical methods of mycotoxins
Lithuanian Standards Office , Standard Particle Analysis Methods
- LST EN 14902-2005 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
- LST EN 14902-2005/AC-2007 Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
- LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
- LST CEN/TS 17458-2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
AWS - American Welding Society, Standard Particle Analysis Methods
- F1.4-1987 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes
- F1.4-1997 Methods for Analysis of Airborne Particulates Generated by Welding and Allied Processes
工业和信息化部/国家能源局, Standard Particle Analysis Methods
- JB/T 12895-2016 Classification and detection method of pollutant particles in internal combustion engine lubricating oil
AT-ON, Standard Particle Analysis Methods
- ONORM M 5858-1997 Air analysis - Ambient air monitoring - Requirements for monitors for suspended particulate matter - Marking of conformity
IT-UNI, Standard Particle Analysis Methods
- UNI CEN/TS 17458-2021 Ambient air - Methodology to assess the performance of receptor oriented source apportionment modelling applications for particulate matter
VN-TCVN, Standard Particle Analysis Methods
- TCVN 5225-2007 Coke (nominal top size greater than 20 mm).Size analysis by sieving
Guangdong Provincial Standard of the People's Republic of China, Standard Particle Analysis Methods
- DB44/T 924-2011 Test Method for Free Water and Particulate Contaminants in Distillate Fuels Visual Method
未注明发布机构, Standard Particle Analysis Methods
- JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
- BS EN 12341:2023 Ambient air — Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
Professional Standard - Agriculture, Standard Particle Analysis Methods
- GB/T 5009.37-1996 Analytical method of hygienic standard for edible vegetable oil
- 空气和废气监测分析方法 7.2.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources 2 Other Classification Methods
US-CFR-file, Standard Particle Analysis Methods
- CFR 40-60.382-2014 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.382:Standard for particulate matter.
- CFR 40-60.472-2014 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.472:Standards for particulate matter.