ZH
RU
ES
ring
ring, Total:162 items.
In the international standard classification, ring involves: Fasteners, Protective equipment, AIRCRAFT AND SPACE VEHICLE ENGINEERING, Conducting materials, Hand-held tools, Aircraft and space vehicles in general, Standardization. General rules, Rubber and plastics products, Springs, Aerospace electric equipment and systems, Continuous handling equipment, Earthworks. Excavations. Foundation construction. Underground works, Petroleum, petroleum products and natural gas handling equipment, Aerospace fluid systems and components, Paper and board, Organic chemicals, Compressors and pneumatic machines, Products of the textile industry, Spices and condiments. Food additives, Bearings, Agricultural machines, implements and equipment, Pipeline components and pipelines, Cereals, pulses and derived products, Plastics, Headgear. Clothing accessories. Fastening of clothing, Electrical accessories, Medical equipment, Construction materials, Components for aerospace construction, Rubber, Materials for aerospace construction, Reinforced plastics, Chipless working equipment, Environmental protection.
CZ-CSN, ring
HU-MSZT, ring
PL-PKN, ring
- PN K88174-1961 Railway Rolling Stock. Ring Springs. Rings
- PN M73093-1964 Hydraulic drive and control equipment. Ring seals type ?O" for static seal Dimensions
Aerospace Industries Association/ANSI Aerospace Standards, ring
- AIA/NAS NAS 1251-1972 Bolt, Ring - Swivel (Rev. 4)
- AIA/NAS NASM21322-1998 Clamp, Loop-Aluminum, Plain and Cushioned
- AIA/NAS NASM21333-1998 Clamp, Loop-Steel, Plain and Cushioned
- AIA/NAS NASM43770/7-1999 Snap Hooks, Cast Body, Loop Eye Swivel
- AIA/NAS NASM21334-1998 Clamp, Loop-Double, Cable or Tube, Steel, Plain and Cushioned
- AIA/NAS NASM45909-1999 Stud, Locked in, Ring Locked, Serrated, General Specification for
- AIA/NAS NAS 50-1956 Rings - Internal Retainer Superseded - July 1956 (Rev. 2) [Use: AIA/NAS NAS 669]
- AIA/NAS NAS 51-1956 Rings - External Retainer Superseded - July 1956 (Rev. 2) [Use: AIA/NAS NAS 670]
- AIA/NAS NASM21043-2003 Nut, Self-Locking, 800 Degrees F, Reduced Hexagon, Reduced Height, Ring Base, Corrosion Resistant Steel Rev 2
- AIA/NAS NASM21042-1998 Nut, Self-Locking, 450 Degrees F, Reduced Hexagon, Reduced Height, Ring Base, Non-Corrosion Resistant Steel
Professional Standard - Chemical Industry, ring
FI-SFS, ring
U.S. Military Regulations and Norms, ring
United States Navy, ring
- NAVY QPL-85052-9 NOTICE 1-2007 CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR
- NAVY QPL-85052-9-2006 CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR
- NAVY MIL-I-24783-1993 ISOLATOR, RING TYPE, PRESSURE, FOR SHIPBOARD SEWAGE SERVICE
- NAVY MIL-I-23413 C-1981 INSERTS, WELDING, FILLER MATERIEL, COILED AND SOLID RINGS
Taiwan Provincial Standard of the People's Republic of China, ring
- CNS 8370-1982 Toroidal Dust Cores of Fe-Si-AL Alloy
- CNS 3620-1994 Dimenional Standards - Endless Loop Magnetic Tape Cartridges, Types }yh, }yiand }yj
Professional Standard - Light Industry, ring
SE-SIS, ring
(U.S.) Ford Automotive Standards, ring
- FORD SK-M3G9512-A-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF-ADHESIVE
- FORD ESB-M7H5-A2-1985 TAPE, FASTENER - LOOP (KNIT) (Shown on ESB-M7H4-A1)
- FORD ESB-M7H5-B2-1985 TAPE, FASTENER - LOOP (KNIT) (Shown on ESB-M7H4-A1)
- FORD SK-M3G9512-AA-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF ADHESIVE Shown on SK-M3G9512-A
- FORD SK-M3G9512-BA-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF ADHESIVE Shown on SK-M3G9512-A
- FORD ESB-M7H5-A1-1985 TAPE, FASTENER - LOOP (WOVEN) (Shown on ESB-M7H4-A1)
- FORD ESB-M7H5-B1-1985 TAPE, FASTENER - LOOP (WOVEN) (Shown on ESB-M7H4-A1)
- FORD SK-M3G9512-AB-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF ADHESIVE, APPROVED MINIMUM THICKNESS FOR FLAMMABILITY 2,0MM Shown on SK-M3G9512-A
- FORD SK-M3G9512-BB-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF ADHESIVE, APPROVED MINIMUM THICKNESS FOR FLAMMABILITY 2,0MM Shown on SK-M3G9512-A
American National Standards Institute (ANSI), ring
- ANSI/ASTM D2291:1998 Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
- ANSI/ASTM D2290:2012 Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
RO-ASRO, ring
- STAS 12544-1987 TECHNOLOGICAL TESTS OF STEEL TUBES Ring tensile test
- STAS 7546/4-1977 Locksmith's tools SCREWDRIVERS FOR SCREWS WITH CROSS RECESS Go ring gauges and controlling plates Dimensions and technical requirements
ESDU - Engineering Sciences Data Unit, ring
- ESDU 94025 A-2006 Viscosity of liquids: Aliphatic and cyclic ketones.
- ESDU 93010-1993 Orthobaric densities and molar volumes of liquids. Aliphatic and cyclic ketones.
Professional Standard - Military and Civilian Products, ring
- WJ 1893-1989 General specification for shell annular guide blanks
Professional Standard - Commodity Inspection, ring
- SN/T 1394-2004 Protocol of milk ring test for brucellosis
- SN/T 3632-2013 Method on the detection of Alicyclobacillus spp. in fruit and vegetable juices for Export
Society of Automotive Engineers (SAE), ring
- SAE MA2150/7-1991 CLAMP, LOOP STYLE, WITH INSERT, HIGH TEMPERATURE, METRIC
- SAE AS9514-1999 Cushion, Loop Clamp-Multiple, 3-Tube, AMS 3677 FSC 5340
- SAE AS9515-1999 Cushion, Loop Clamp-Multiple, 2-Tube, AMS 3677 FSC 5340
- SAE MA2150-1993 Clamps, Loop or P Style, Single Point Mount, Multiple Shapes, Metric
- SAE AS1985B-1994 Adapter, Assembly - Port Connection, Ring Locked to Flared Tube End (Reaffirmed: 01 Oct 2000)
- SAE MA2150/6-1991 CLAMP, LOOP STYLE, WITH INSERT, PHOSPHATE ESTER FLUID RESISTANT, METRIC
- SAE MA2150/1-1991 CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, HYDROCARBON FLUID RESISTANT, METRIC
- SAE MA2155/5-1991 Clamp, Rectangular Loop, Cushioned, with Wedge, High Temperature, Stainless Steel, Metric
- SAE MA2150/2-1991 CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, METRIC
- SAE ARP671B-2013 Bearing, Ball Annular
- SAE AMS5754M-2007 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated UNS N06002
- SAE AS5550B-2013 Fitting Assembly, Ring Locked, Adapter, Flareless to Port, Extra Fine Threads, 5080 PSI
RU-GOST R, ring
- GOST ISO 16851-2016 Endless textile conveyor belts. Determination of the length
- GOST 10711-1997 Paper and board. Method for determination of breaking force by ring compression (RCT)
- GOST 10711-1974 Paper and board. Method for the determination of ring destruction force under compression. (Ring Crush Test)
- GOST R 54645-2011 Ring shaped crusts. General specifications
- GOST 16783-1971 Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop
Korean Agency for Technology and Standards (KATS), ring
- KS F 2348-2006 Method for ring-lined barrel sampling of soils
- KS M ISO 15033:2022 Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
- KS M ISO 15033-2016(2021) Plastics-Determination of caprolactam and its cyclic and linear oligomers by HPLC
- KS M ISO 15033:2016 Plastics-Determination of caprolactam and its cyclic and linear oligomers by HPLC
- KS W ISO 7315:2009 Aerospace-“P”clamps(loop clamps)for fluid systems-Envelope dimensions
- KS W ISO 7315:2016 Aerospace-“P”clamps(loop clamps)for fluid systems-Envelope dimensions
- KS M ISO 13968:2008 Plastics piping and ducting systems-Thermoplastics pipes-Determination of ring flexibility
- KS M ISO 13968:2015 Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
- KS M ISO 15033:2011 Plastics-Determination of caprolactam and its cyclic and linear oligomers by HPLC
SAE - SAE International, ring
Professional Standard - Petroleum, ring
- SY/T 0084-1994 Standard test method for ring bendability of pipeline coatings
- SY/T 0084-2012 Standard test methods for ring bendabity of pipeline coatings
BE-NBN, ring
- NBN-EN 10237-1994 Metallic materials. Tube. Ring tensile test
- NBN-ISO 1604:1991 Belt drives - Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys
AENOR, ring
- UNE-EN 12257:2003 Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders.
Standard Association of Australia (SAA), ring
- AS 1334.1:1982 Methods of testing conveyor and elevator belting - Determination of length of endless belting
- AS 1334.2:1982 Methods of testing conveyor and elevator belting - Determination of thickness of belting and rubber covers across the width
Professional Standard - Machinery, ring
- JB/T 53175-2000 Product Quality Grading of Annular Valve Plates of Reciprocating Piston Compressors
- JB/T 2231.4-1999 Reciprocating piston compressor part-subassembly.Part 4:Ring-tpye valve plate
- JB/T 11670-2013 Specifications of wet-annualr internal expanding brake of walking tractor
- JB/T 2231.4-2013 Reciprocating piston compressor part-subassembly.Part 4:Metal ring valve plate
American Society for Testing and Materials (ASTM), ring
- ASTM D3437-03 Standard Practice for Sampling and Handling Liquid Cyclic Products
- ASTM D3437-08 Standard Practice for Sampling and Handling Liquid Cyclic Products
- ASTM F2431-04 Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
- ASTM F2431-04(2012) Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
- ASTM D5169-98(2010) Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
- ASTM D5170-98(2015) Standard Test Method for Peel Strength (“T” Method) of Hook and Loop Touch Fasteners
- ASTM D5169-98(2015) Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
- ASTM F2428-04 Standard Guide for Selection and Use for Pelvic Ring Circumferential Compression Stabilization Devices (PRCCSD)
- ASTM F2428-04(2011) Standard Guide for Selection and Use for Pelvic Ring Circumferential Compression Stabilization Devices (PRCCSD)
- ASTM D5170-98(2004) Standard Test Method for Peel Strength ("T" Method) of Hook and Loop Touch Fasteners
- ASTM D5170-98 Standard Test Method for Peel Strength ("T" Method) of Hook and Loop Touch Fasteners
- ASTM D5170-98(2010) Standard Test Method for Peel Strength ("T" Method) of Hook and Loop Touch Fasteners
- ASTM D5169-98 Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
- ASTM D5169-98(2004) Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, ring
- GB/T 28188-2011 Textiles. Determination of elasticity of horsetail hair interlining. Loop with hanging weight
- GB/T 13643-1992 Rubber,vuicanized or thermoplastic--Determination of compression stress relaxation(rings)
GM North America, ring
- GM GM9127P-1988 Resistance to Tuft Removal or Loop Pullout of Floor Coverings
NO-SN, ring
- NS 2673-1984 Aluminium/steel bolted joints - Countersunk and collar chloroprene rubber ferrules
National Health Commission of the People's Republic of China, ring
Professional Standard - Agriculture, ring
- 88兽药产品说明书范本第三册-2013 Instructions for Diagnostic Products Brucellosis Whole Milk Circular Reaction Antigen
- 101兽药典 三部-2015 Text table of contents diagnostic products brucellosis whole milk circular reactive antigen
American Society of Mechanical Engineers (ASME), ring
IT-UNI, ring
KR-KS, ring
- KS M ISO 15033-2022 Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
- KS M ISO 15033-2016 Plastics-Determination of caprolactam and its cyclic and linear oligomers by HPLC
Defense Logistics Agency, ring
- DLA DSCC-DWG-89090 REV C-2002 CONNECTOR, ELECTRICAL, CIRCULAR, PLUG, STRAIGHT, REMOVAL CRIMP CONTACTS, SERIES III, HYBRID CONSTRUCTION
- DLA DSCC-DWG-89094 REV A-2002 CONNECTOR, ELECTRICAL, CIRCULAR, RECEPTACLE, JAM NUT MOUNTING, REMOVABLE CRIMP CONTACTS, SERIES III, HYBRID CONSTRUCTION
- DLA DSCC-DWG-89093 REV A-2002 CONNECTOR, ELECTRICAL, CIRCULAR, RECEPTACLE WALL MOUNTING FLANGE, REMOVABLE CRIMP CONTACTS, SERIES III, HYBRID CONSTRUCTION
German Institute for Standardization, ring
- DIN 53843-2:1988 Testing of textiles; loop tensile test for staple fibres
- DIN EN 2645:2007 Aerospace series - Lockrings for adaptors, threaded, with lockring - Dimensions; German and English version EN 2645:2005
Association Francaise de Normalisation, ring
- NF P18-431-12*NF EN 12350-12:2010 Testing fresh concrete - Part 12 : self-compacting concrete - J-ring test
- NF E63-509-1:1997 Tools for moulding. Locating rings. Part 1 : locating rings for mounting without thermal insulating sheets in small or medium moulds. Types A and B.
British Standards Institution (BSI), ring
International Organization for Standardization (ISO), ring
- ISO 7315:1988 Aerospace; "P" clamps (loop clamps) for fluid systems; envelope dimensions
- ISO 15033:2000 Plastics - Determination of caprolactam and its cyclic and linear oligomers by HPLC
- ISO 15033:2007 Plastics - Determination of caprolactam and its cyclic and linear oligomers by HPLC
- ISO 15033:2018 Plastics - Determination of caprolactam and its cyclic and linear oligomers by HPLC
- ISO 10466:2021 Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
Professional Standard - Environmental Protection, ring
- HJ 192-2015 Technical Criterion for Ecosystem Status Evaluation
- HJ/T 192-2006 Technical criterion for eco-environmental status evaluation
YU-JUS, ring
- JUS C.H4.079-1980 Cargo hook swivels. Shape, dimensions and loads
- JUS M.B6.881-1985 Tube fittings and unions with spherical nipple. Ringlike nipple for tube. Shape and dimension
European Committee for Standardization (CEN), ring
- EN 1228:1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
Zhejiang Provincial Standard of the People's Republic of China, ring
- DB3311/T 148-2020 Guidelines for monitoring the ecological environment of national parks