ZH
RU
ES
Cyclic peptide
Cyclic peptide, Total:345 items.
In the international standard classification, Cyclic peptide involves: Products of the chemical industry, Components for aerospace construction, Water quality, Fasteners, Radiation protection, Cereals, pulses and derived products, Aircraft and space vehicles in general, Pipeline components and pipelines, Protective equipment, AIRCRAFT AND SPACE VEHICLE ENGINEERING, Conducting materials, Hand-held tools, Aerospace fluid systems and components, Fasteners for aerospace construction, Standardization. General rules, Rubber and plastics products, Springs, Components for electrical equipment, Electromechanical components for electronic and telecommunications equipment, Iron and steel products, Paints and varnishes, Aerospace electric equipment and systems, Continuous handling equipment, Bearings, Headgear. Clothing accessories. Fastening of clothing, Environmental protection, Earthworks. Excavations. Foundation construction. Underground works, Flexible drives and transmissions, Environmental testing, Petroleum, petroleum products and natural gas handling equipment, Materials for aerospace construction, Raw materials for rubber and plastics, Paper and board, Road vehicle systems, Insulating materials, Textile machinery, Fuels, Transport, Energy and heat transfer engineering in general, Building accessories, Organic chemicals, Power stations in general, Compressors and pneumatic machines, Products of the textile industry, Spices and condiments. Food additives, Lamps and related equipment, Linear and angular measurements, Shafts and couplings, Road engineering, Gas and steam turbines. Steam engines, Agricultural machines, implements and equipment, Plastics, Construction materials, Magnetic materials, Non-ferrous metals, Chipless working equipment, Electrical accessories, Applications of information technology, Vocabularies, Fibre optic communications, Air quality, Medical equipment, Testing of metals, Occupational safety. Industrial hygiene, Surface treatment and coating, Rubber, Solar energy engineering, Electrical and electronic testing, Optical equipment.
Military Standards (MIL-STD), Cyclic peptide
CZ-CSN, Cyclic peptide
HU-MSZT, Cyclic peptide
PL-PKN, Cyclic peptide
- PN K88174-1961 Railway Rolling Stock. Ring Springs. Rings
- PN L82098-1991 Tubular rivets aircraft with mandrel. Mandrels and locking rings
- PN M73093-1964 Hydraulic drive and control equipment. Ring seals type ?O" for static seal Dimensions
Society of Automotive Engineers (SAE), Cyclic peptide
- SAE ARP671B-2013 Bearing, Ball Annular
- SAE AS51997B-2013 RING, LOCKED, SERRATED-HIGH STRENGTH
- SAE MA2150-1993 Clamps, Loop or P Style, Single Point Mount, Multiple Shapes, Metric
- SAE AS5587-2000 Clamp, Loop, Plain, Support, Aircraft
- SAE AMS7325A-1959 RINGS, SEALING, TUBULAR METAL, CORROSION RESISTANT STEEL
- SAE AS51989A-2014 STUD, LOCKED IN-RING LOCKED, SERRATED
- SAE AS51992A-2012 STUD, LOCKED IN-RING, SERRATED, HIGH STRENGTH
- SAE MA2150/7-1991 CLAMP, LOOP STYLE, WITH INSERT, HIGH TEMPERATURE, METRIC
- SAE AS9514-1999 Cushion, Loop Clamp-Multiple, 3-Tube, AMS 3677 FSC 5340
- SAE AS9515-1999 Cushion, Loop Clamp-Multiple, 2-Tube, AMS 3677 FSC 5340
- SAE AMS7325B-1963 RINGS, SEALING, TUBULAR METAL, CORROSION AND HEAT RESISTANT STEEL
- SAE AMS7325D-1976 RINGS, SEALING, TUBULAR METAL, CORROSION AND HEAT RESISTANT STEEL
- SAE AMS7325C-1966 RINGS, SEALING, TUBULAR METAL, CORROSION AND HEAT RESISTANT STEEL
- SAE AMS5754M-2007 Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated UNS N06002
- SAE MA2150-2015 Clamps, Loop or P Style, Single Point Mount, Multiple Shapes, Metric
- SAE AS1985B-1994 Adapter, Assembly - Port Connection, Ring Locked to Flared Tube End (Reaffirmed: 01 Oct 2000)
- SAE MA2150/6-1991 CLAMP, LOOP STYLE, WITH INSERT, PHOSPHATE ESTER FLUID RESISTANT, METRIC
- SAE MA2150/1-1991 CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, HYDROCARBON FLUID RESISTANT, METRIC
- SAE AMS4964-2000 Titanium Alloys Bars, Wire, Forgings, and Rings 4.5Al 3V 2Fe 2Mo Annealed
- SAE MA2155/5-1991 Clamp, Rectangular Loop, Cushioned, with Wedge, High Temperature, Stainless Steel, Metric
- SAE AS81582B-2012 Connectors, Electrical, Bayonet Coupling, Environment Resisting, Umbilical, General Specification for
- SAE MA2150/2-1991 CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, METRIC
- SAE AS5550B-2013 Fitting Assembly, Ring Locked, Adapter, Flareless to Port, Extra Fine Threads, 5080 PSI
(U.S.) Ford Automotive Standards, Cyclic peptide
- FORD SK-M3G9512-A-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF-ADHESIVE
- FORD SK-M3G9512-AA-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF ADHESIVE Shown on SK-M3G9512-A
- FORD SK-M3G9512-BA-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF ADHESIVE Shown on SK-M3G9512-A
- FORD ESB-M7H5-A2-1985 TAPE, FASTENER - LOOP (KNIT) (Shown on ESB-M7H4-A1)
- FORD ESB-M7H5-B2-1985 TAPE, FASTENER - LOOP (KNIT) (Shown on ESB-M7H4-A1)
- FORD SK-M3G9512-AB-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF ADHESIVE, APPROVED MINIMUM THICKNESS FOR FLAMMABILITY 2,0MM Shown on SK-M3G9512-A
- FORD SK-M3G9512-BB-1994 HOOK/LOOP TAPE FASTENER, BACK SIDE SELF ADHESIVE, APPROVED MINIMUM THICKNESS FOR FLAMMABILITY 2,0MM Shown on SK-M3G9512-A
- FORD ESB-M7H5-A1-1985 TAPE, FASTENER - LOOP (WOVEN) (Shown on ESB-M7H4-A1)
- FORD ESB-M7H5-B1-1985 TAPE, FASTENER - LOOP (WOVEN) (Shown on ESB-M7H4-A1)
- FORD ESB-M70J4-A-2005 PAINT, POWDERED, THERMOSETTING EPOXY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD ESF-M70J1-A-2005 PAINT, POWDERED, THERMOSETTING EPOXY ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSF-M70J10-A-2005 PAINT, POWDERED, THERMOSETTING EPOXY ***TO BE USED WITH FORD WSS-M99P1111-A***
Fujian Provincial Standard of the People's Republic of China, Cyclic peptide
- DB35/T 1499-2015 Determination of Bacitracin, Colistin and Virginmycin Residues in Aquaculture Environment
Aerospace Industries Association/ANSI Aerospace Standards, Cyclic peptide
- AIA/NAS NAS 1251-1972 Bolt, Ring - Swivel (Rev. 4)
- AIA/NAS NASM21322-1998 Clamp, Loop-Aluminum, Plain and Cushioned
- AIA/NAS NASM21333-1998 Clamp, Loop-Steel, Plain and Cushioned
- AIA/NAS NAS 1716-1997 Clamp, Loop-Cushioned, Saddle Revision 3; FSC 5340
- AIA/NAS NASM43770/7-1999 Snap Hooks, Cast Body, Loop Eye Swivel
- AIA/NAS NASM21334-1998 Clamp, Loop-Double, Cable or Tube, Steel, Plain and Cushioned
- AIA/NAS NASM45909-1999 Stud, Locked in, Ring Locked, Serrated, General Specification for
- AIA/NAS NASM45909-2016 STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR (Rev 2)
- AIA/NAS NAS 50-1956 Rings - Internal Retainer Superseded - July 1956 (Rev. 2) [Use: AIA/NAS NAS 669]
- AIA/NAS NAS 51-1956 Rings - External Retainer Superseded - July 1956 (Rev. 2) [Use: AIA/NAS NAS 670]
- AIA/NAS NASM21043-2003 Nut, Self-Locking, 800 Degrees F, Reduced Hexagon, Reduced Height, Ring Base, Corrosion Resistant Steel Rev 2
Group Standards of the People's Republic of China, Cyclic peptide
- T/BSRS 016-2020 Technical specification for environmental quality survey nuclear powered -Environmental quality status
- T/GXAS 369-2022 Operation guidance of status survey for environmental impact assessment of industrial project
RU-GOST R, Cyclic peptide
- GOST R 54645-2011 Ring shaped crusts. General specifications
- GOST 24011-1980 Belt ring magnetic. Construction and dimensions
- GOST ISO 16851-2016 Endless textile conveyor belts. Determination of the length
- GOST 10711-1997 Paper and board. Method for determination of breaking force by ring compression (RCT)
- GOST 10711-1974 Paper and board. Method for the determination of ring destruction force under compression. (Ring Crush Test)
- GOST R 14.12-2006 Ecological management. Integrating evironmental aspects into product design and development
- GOST R 56060-2014 Industrial environmental monitoring. Monitoring of the state and pollution of the environment on the territories of waste disposal facilities
- GOST 16783-1971 Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop
- GOST R IEC 60068-2-78-2009 Environmental testing. Part-2-78. Tests. Test Cab: Damp heat, steady state
Professional Standard - Chemical Industry, Cyclic peptide
United States Navy, Cyclic peptide
- NAVY MIL-I-23413 C-1981 INSERTS, WELDING, FILLER MATERIEL, COILED AND SOLID RINGS
- NAVY QPL-85052-9 NOTICE 1-2007 CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR
- NAVY QPL-85052-9-2006 CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR
- NAVY MIL-I-24783-1993 ISOLATOR, RING TYPE, PRESSURE, FOR SHIPBOARD SEWAGE SERVICE
American Society of Mechanical Engineers (ASME), Cyclic peptide
FI-SFS, Cyclic peptide
U.S. Military Regulations and Norms, Cyclic peptide
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Cyclic peptide
Taiwan Provincial Standard of the People's Republic of China, Cyclic peptide
- CNS 8370-1982 Toroidal Dust Cores of Fe-Si-AL Alloy
- CNS 3620-1994 Dimenional Standards - Endless Loop Magnetic Tape Cartridges, Types }yh, }yiand }yj
- CNS 9727-1983 Shapes and Dimensions of Flutes of Fluted Rollers for Fine Spinning Frames
- CNS 7029-1989 Shape, Dimensions and Travel Angles of Drawbar Eyes for Full Trailers
API - American Petroleum Institute, Cyclic peptide
Professional Standard - Light Industry, Cyclic peptide
YU-JUS, Cyclic peptide
- JUS C.H1.306-1982 Thimbles for wire ropes. Shapes and dimensions
- JUS C.H4.079-1980 Cargo hook swivels. Shape, dimensions and loads
- JUS N.A5.715-1980 Basic environmental testing procedures. Test Ca: Damp heat, steady state
- JUS C.H4.031-1978 Rourui steel link chains for convevors, tested, halflong link. Shape, dimensions and loads
- JUS C.H4.030-1978 Round steel link chains for conveyon. Tested, catibrated, long link. Shape, dimensions and loads
- JUS C.H4.025-1978 Round steel chiin ends. Teste?, short Link. Shape, dimensions and loads
- JUS G.S2.625-1982 Plastics. Determination of enov iron mental stress cracking (ESC). Ball or pin inpression method
- JUS C.H4.033-1978 Chain-ends for bucket-conveyon, tested, halflong link. Shape, dimensiom and loads
SE-SIS, Cyclic peptide
SAE - SAE International, Cyclic peptide
- SAE AMS7325-1957 RINGS@ SEALING@ TUBULAR METAL@ CORROSION RESISTANT STEEL
- SAE AMS7325F-1993 RINGS@ SEALING@ TUBULAR METAL@ CORROSION AND HEAT RESISTANT STEEL
- SAE AS9514A-2005 CUSHION@ LOOP CLAMP-MULTIPLE@ 3-TUBE@ AMS 3677
- SAE AS9515A-2005 CUSHION@ LOOP CLAMP-MULTIPLE@ 2-TUBE@ AMS 3677
- SAE AMS7325E-1986 RINGS@ SEALING@ TUBULAR METAL@ CORROSION AND HEAT RESISTANT STEEL (UNS S32100)
- SAE AMS4928P-2000 Titanium Alloy Bars@ Wire@ Forgings@ Rings@and Drawn Shapes 6Al - 4V Annealed
- SAE AS81582-1998 Connectors@ Electrical@ Bayonet Coupling@ Environment Resisting@ Umbilical@ General Specification for
- SAE AS81582A-2011 Connectors@ Electrical@ Bayonet Coupling@ Environment Resisting@ Umbilical@ General Specification For
- SAE AS81582-2004 Connectors@ Electrical@ Bayonet Coupling@ Environment Resisting@ Umbilical@ General Specification for
- SAE AS81582C-2017 Connectors@ Electrical@ Bayonet Coupling@ Environment Resisting@ Umbilical@ General Specification For
- SAE AMS4928V-2016 Titanium Alloy Bars@ Wire@ Forgings@ Rings@ and Drawn Shapes 6Al - 4V Annealed (UNS R56400)
- SAE AMS4928S-2011 Titanium Alloy Bars@ Wire@ Forgings@ Rings@ and Drawn Shapes 6Al - 4V Annealed (UNS R56400)
- SAE AMS4928R-2007 Titanium Alloy Bars@ Wire@ Forgings@ Rings@ and Drawn Shapes 6Al - 4V Annealed (UNS R56400)
- SAE AMS4928T-2013 Titanium Alloy Bars@ Wire@ Forgings@ Rings@ and Drawn Shapes 6Al - 4V Annealed (UNS R56400)
- SAE AMS6948A-2015 Titanium Alloy Bars@ Wire@ Forgings@ Rings@ and Drawn Shapes 4Al - 2.5V -1.5 Fe Annealed (UNS R54250)
Military Standard of the People's Republic of China-General Armament Department, Cyclic peptide
- GJB 8518-2015 Specification for shape memory alloy fastening rings
CU-NC, Cyclic peptide
- NC 93-00-004-1987 Standards System for Environment Protection. Environment's State. General Criteria for its Evaluation
Professional Standard - Aerospace, Cyclic peptide
- QJ 2132-1991 Classification and codes of environmental status of environmental protection system data elements
American National Standards Institute (ANSI), Cyclic peptide
- ANSI/ASTM D2291:1998 Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
- ANSI A118.8-1999 Specifications for Modified Epoxy Emulsion Mortar Grout (included in ANSI A108.1-1992)
Professional Standard - Environmental Protection, Cyclic peptide
- HJ 192-2015 Technical Criterion for Ecosystem Status Evaluation
- HJ/T 192-2006 Technical criterion for eco-environmental status evaluation
- HJ 774-2015 Technical Guideline for the Environmental Protection Status Assessment of the Centralized Drinking Water Sources
RO-ASRO, Cyclic peptide
ESDU - Engineering Sciences Data Unit, Cyclic peptide
- ESDU 94025 A-2006 Viscosity of liquids: Aliphatic and cyclic ketones.
- SPF-M14-1-2010 Sept.10: Annulus flow tests (status report on tube and annulus flow rig development)
- SPF-M12-1-2010 Sept.09: Annulus flow tests (status report on tube and annulus flow rig development)
- SPF-M6-1-2010 Apr.08: Annulus flow tests (status report on tube and annulus flow rig development)
- ESDU 93010-1993 Orthobaric densities and molar volumes of liquids. Aliphatic and cyclic ketones.
Japanese Industrial Standards Committee (JISC), Cyclic peptide
- JIS K 5555:2002 Epoxy resin Micaceous Iron Oxide paint
- JIS H 7106:1993 Method of fixed strain thermal cycling test for coil springs of shape memory alloys
- JIS H 7106:2002 Method of fixed strain thermal cycling test for coil springs of shape memory alloys
- JIS C 8917:1998 Environmental and endurance test methods for crystalline solar PV modules
- JIS C 0022:1987 Basic environmental testing procedures Part 2: Tests, Test Ca: Damp heat, steady state
Professional Standard - Military and Civilian Products, Cyclic peptide
- WJ 1893-1989 General specification for shell annular guide blanks
Korean Agency for Technology and Standards (KATS), Cyclic peptide
- KS W 1611-2004 Aerospace-Serrated Ring Locked Stud
- KS F 2348-2006 Method for ring-lined barrel sampling of soils
- KS R 4072-2008 SHAPES, DIMENSIONS AND TRAVEL ANGLES OF DRAWBAR EYES FOR FULL TRAILERS
- KS W 0924-1999(2009) ENVIRONMENTAL TEST FOR AIRCRAFT EQUIPMENT - PART 3.2 : STEADY STATE ACCELERATION
- KS D 0303-2004 Method of fixed strain thermal cycling test for coil spring of shape memory alloys
- KS C IEC 60068-2-78:2002 Environmental testing-Part 2:Tests-Test Cab:Damp heat, steady state
- KS M ISO 15033:2022 Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
- KS M ISO 15033-2016(2021) Plastics-Determination of caprolactam and its cyclic and linear oligomers by HPLC
- KS M ISO 15033:2016 Plastics-Determination of caprolactam and its cyclic and linear oligomers by HPLC
- KS D 0303-2004(2019) Method of fixed strain thermal cycling test for coil spring of shape memory alloys
- KS D 0303-1995 Method of fixed strain thermal cycling test for coil springs of shape memory alloys
- KS I 25640-2012 Determination of emission of formaldehyde from wood product-Large chamber method
- KS W ISO 7315:2009 Aerospace-“P”clamps(loop clamps)for fluid systems-Envelope dimensions
- KS C IEC 60068-2-78:2018 Environmental testing — Part 2-78: Tests — Test Cab: Damp heat, steady state
- KS W ISO 7315:2016 Aerospace-“P”clamps(loop clamps)for fluid systems-Envelope dimensions
- KS M ISO 13968:2008 Plastics piping and ducting systems-Thermoplastics pipes-Determination of ring flexibility
- KS M ISO 13968:2015 Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
JP-JASO, Cyclic peptide
Professional Standard - Commodity Inspection, Cyclic peptide
- SN/T 1394-2004 Protocol of milk ring test for brucellosis
- SN/T 3632-2013 Method on the detection of Alicyclobacillus spp. in fruit and vegetable juices for Export
NL-NEN, Cyclic peptide
American Society for Testing and Materials (ASTM), Cyclic peptide
- ASTM F2431-04 Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
- ASTM F2431-04(2012) Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
- ASTM D5169-98(2010) Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
- ASTM D5170-98(2015) Standard Test Method for Peel Strength (“T” Method) of Hook and Loop Touch Fasteners
- ASTM D5169-98(2015) Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
- ASTM D5170-98(2004) Standard Test Method for Peel Strength ("T" Method) of Hook and Loop Touch Fasteners
- ASTM D5170-98 Standard Test Method for Peel Strength ("T" Method) of Hook and Loop Touch Fasteners
- ASTM D5170-98(2010) Standard Test Method for Peel Strength ("T" Method) of Hook and Loop Touch Fasteners
- ASTM D5169-98 Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
- ASTM D5169-98(2004) Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners
- ASTM D3437-03 Standard Practice for Sampling and Handling Liquid Cyclic Products
- ASTM D3437-08 Standard Practice for Sampling and Handling Liquid Cyclic Products
- ASTM E3097-23 Standard Test Method for Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
- ASTM E1556-03 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
- ASTM F2428-04 Standard Guide for Selection and Use for Pelvic Ring Circumferential Compression Stabilization Devices (PRCCSD)
- ASTM E1556-98 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
- ASTM F2428-04(2011) Standard Guide for Selection and Use for Pelvic Ring Circumferential Compression Stabilization Devices (PRCCSD)
- ASTM E1556-12 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
- ASTM E1556-08 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
未注明发布机构, Cyclic peptide
- BS 3790:2006(2011) Specification for belt drives – Endless wedge belts, endless V - belts, banded wedge belts, banded V - belts and their corresponding pulleys
- ISO/TR 21960:2020 Plastics — Environmental aspects — State of knowledge and methodologies
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cyclic peptide
- GB/T 30691-2014 Conveyor belts.Test atmospheres and conditioning periods
- GB/T 2918-1998 Plastics--Standard atmospheres for conditioning and testing
- GB/T 2918-2018 Standard environment for conditioning and testing of plastic specimens
- GB/T 31134-2014 Fiber reinforced epoxy powder moulding compounds(EP-PMC) for electrical purposes
- GB/T 28188-2011 Textiles. Determination of elasticity of horsetail hair interlining. Loop with hanging weight
- GB/T 24002.1-2023 Environmental management system Guidelines for applying GB/T 24001 to manage environmental aspects and respond to environmental conditions for environmental subject areas Part 1: General principles
- GB/T 13643-1992 Rubber,vuicanized or thermoplastic--Determination of compression stress relaxation(rings)
Institute of Electrical and Electronics Engineers (IEEE), Cyclic peptide
Zhejiang Provincial Standard of the People's Republic of China, Cyclic peptide
- DB3311/T 148-2020 Guidelines for monitoring the ecological environment of national parks
British Standards Institution (BSI), Cyclic peptide
- PD CEN ISO/TR 21960:2020 Plastics. Environmental aspects. State of knowledge and methodologies
- BS 3790:2006 Specification for belt drives - Endless wedge belts, endless V-belts, banded wedge belts, banded V-belts and their corresponding pulleys
- BS EN 60068-2-78:2013 Environmental testing. Tests. Test Cab: Damp heat, steady state
- BS EN 60068-2-78:2002 Environmental testing - Test methods - Test Cab - Damp heat, steady state
- BS ISO 10907-2:2007 Tools for moulding. Locating rings. Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
- BS EN 61753-381-6:2016 Fibre optic interconnecting devices and passive components. Performance standard. Cyclic arrayed waveguide grating. Category O (uncontrolled environment)
- BS EN 12350-12:2010 Testing fresh concrete.
Part 12:Self-compacting concrete.J-ring
test
- BS EN 17832:2023 Thermal spraying. Determination of the feed rate with spray material in powder form in a production environment
ES-UNE, Cyclic peptide
- UNE-CEN ISO/TR 21960:2020 Plastics - Environmental aspects - State of knowledge and methodologies (ISO/TR 21960:2020) (Endorsed by Asociación Española de Normalización in May of 2020.)
German Institute for Standardization, Cyclic peptide
- DIN CEN ISO/TR 21960:2021-02 Plastics - Environmental aspects - State of knowledge and methodologies (ISO/TR 21960:2020); English version CEN ISO/TR 21960:2020
- DIN 31699:1986 Plain bearings; shafts, collars, thrust collars; geometrical tolerances and surface roughness
- DIN EN 60399:2009 Barrel thread for lampholders with shade holder ring (IEC 60399:2004 + A1:2008); German version EN 60399:2004 + A1:2008
- DIN V 4001-306:1992 CAD standard parts library; specifications of geometry and parameters; retaining rings with round cross-section
- DIN 53843-2:1988 Testing of textiles; loop tensile test for staple fibres
- DIN EN 17832:2022 Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment; German and English version prEN 17832:2022
- DIN 3689-1:2021 Shaft to collar connection - Hypotrochoidal H-profiles - Part 1: Geometry and dimensions
- DIN EN 2602:2007 Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2602:2005
- DIN EN 2603:2007 Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2603:2005
- DIN EN 1108:1999 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes; German version EN 1108:1999
- DIN EN 2645:2007 Aerospace series - Lockrings for adaptors, threaded, with lockring - Dimensions; German and English version EN 2645:2005
- DIN EN 17832:2023-08 Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment; German version EN 17832:2023
- DIN EN 2605:2007 Aerospace series - 24° interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2605:2005
- DIN 3689-1:2021-11 Shaft to collar connection - Hypotrochoidal H-profiles - Part 1: Geometry and dimensions
- DIN EN 2604:2007 Aerospace series - 8° 30' interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2604:2005
- DIN 32711-1:2009-03 Shaft to collar connection - Polygon profil P3G - Part 1: Generalities and geometry / Note: To be replaced by DIN 32711-1 (2023-01).
- DIN 32712-1:2009-03 Shaft to collar connection - Polygon profile P4C - Part 1: Generalities and geometry
Association Francaise de Normalisation, Cyclic peptide
- NF EN 10275:1999 Matériaux métalliques - Essai d'expansion hydraulique sur anneau tubulaire.
- NF E11-030:1994 Gauges. 1,99 mm to 300 mm diameter plain ring gauges. General shapes and dimensions.
- NF E22-620:1980 Pressed-on assemblies. Dimensions, tolerances and surface condition of usual assemblies.
- NF P99-020:1991 ROAD TRAFFIC CONTROL. JUNCTION TRAFFIC LIGHTS. TESTING ADEQUACY TO ENVIRONMENTAL CONDITIONS.
- NF C20-700-2-78*NF EN 60068-2-78:2013 Environmental Testing - Part 2-78 : tests - Test Cab : damp heat, steady state
- NF E63-509-1:1997 Tools for moulding. Locating rings. Part 1 : locating rings for mounting without thermal insulating sheets in small or medium moulds. Types A and B.
- NF EN ISO 14002-1:2020 Systèmes de management environnemental - Lignes directrices pour l'utilisation de l'ISO 14001 afin de prendre en compte les situations et aspects environnementaux dans le cadre d'une thématique environnementale donnée - Partie 1 : généralités
- NF P18-431-12*NF EN 12350-12:2010 Testing fresh concrete - Part 12 : self-compacting concrete - J-ring test
- NF L23-252*NF EN 3425:2006 Aerospace series - Groove dimensions for axial mounting internal type retaining rings
- NF E22-373:1998 Rolling bearings. Radial needle roller and cage assemblies. Dimensions and tolerances.
- NF E63-509-2*NF ISO 10907-2:2008 Tools for moulding - Locating rings - Part 2 : locating rings for mounting with thermal insulating sheets in small or medium moulds - (types C and D)
Professional Standard - Petroleum, Cyclic peptide
- SY/T 0084-1994 Standard test method for ring bendability of pipeline coatings
- SY/T 0084-2012 Standard test methods for ring bendabity of pipeline coatings
BE-NBN, Cyclic peptide
American Concrete Institute, Cyclic peptide
- ACI 207.3R-1994 Practices for Evaluation of Concrete in Existing Massive Structures for Service Conditions
Defense Logistics Agency, Cyclic peptide
- DLA MS51993 REV B-2012 INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH
- DLA DOD-I-63276 A NOTICE 2-1999 INSERT, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC, GENERAL SPECIFICATION FOR
- DLA DOD-I-63276 A VALID NOTICE 1-1989 INSERT, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC, GENERAL SPECIFICATION FOR
- DLA DOD-I-63276 A-1983 INSERT, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC, GENERAL SPECIFICATION FOR
- DLA DOD-S-63275 A NOTICE 1-1999 STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC AND RING, LOCK, SERRATED, METRIC, GENERAL SPECIFICATION FOR
- DLA DOD-S-63275 A (1)-1983 STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC AND RING, LOCK, SERRATED, METRIC, GENERAL SPECIFICATION FOR
- DLA DOD-S-63275 A-1982 STUD, SCREW THREAD, LOCKED IN, RING LOCKED, SERRATED, METRIC AND RING, LOCK, SERRATED, METRIC, GENERAL SPECIFICATION FOR
- DLA MS51497 NOTICE 1-1997 STUD, LOCKED-IN, RING-LOCKED, SERRATED HIGH STRENGTH, OVERSIZE REPLACER
- DLA MS51497-1985 STUD, LOCKED-IN, RING-LOCKED, SERRATED HIGH STRENGTH, OVERSIZE REPLACER
- DLA DSCC-DWG-89090 REV C-2002 CONNECTOR, ELECTRICAL, CIRCULAR, PLUG, STRAIGHT, REMOVAL CRIMP CONTACTS, SERIES III, HYBRID CONSTRUCTION
- DLA MS51551 NOTICE 1-1998 STUD, LOCKED IN-RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
- DLA MS51551-1987 STUD, LOCKED IN-RING LOCKED, SERRATED, UNJF THREAD NUT END, INCREASED STUD END LENGTH
- DLA A-A-59585 C-2008 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 03
- DLA MIL-DTL-83503 C-2005 CONNECTORS, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL, GENERAL SPECIFICATION FOR
- DLA DSCC-DWG-89094 REV A-2002 CONNECTOR, ELECTRICAL, CIRCULAR, RECEPTACLE, JAM NUT MOUNTING, REMOVABLE CRIMP CONTACTS, SERIES III, HYBRID CONSTRUCTION
AENOR, Cyclic peptide
- UNE-EN 12257:2003 Transportable gas cylinders - Seamless, hoop-wrapped composite cylinders.
Aerospace Industries Association, Cyclic peptide
- AIA NASM45909-1999 Stud, Locked in, Ring Locked, Serrated, General Specification for FSC 5307
Professional Standard - Agriculture, Cyclic peptide
- GB 2918-1982 Standard environment for conditioning and testing of plastic specimens
- 88兽药产品说明书范本第三册-2013 Instructions for Diagnostic Products Brucellosis Whole Milk Circular Reaction Antigen
- 101兽药典 三部-2015 Text table of contents diagnostic products brucellosis whole milk circular reactive antigen
- WS/T 776-2021 Technical Specifications for Environmental Monitoring of Novel Coronavirus in Agricultural Trade (Bazaar) Market
General Motors Corporation (GM), Cyclic peptide
Standard Association of Australia (SAA), Cyclic peptide
- AS 1334.1:1982 Methods of testing conveyor and elevator belting - Determination of length of endless belting
- AS 1334.2:1982 Methods of testing conveyor and elevator belting - Determination of thickness of belting and rubber covers across the width
- IEC 60068-2-78:2012 RLV Environmental testing — Part 2-78: Tests — Test Cab: Damp heat, steady state
European Committee for Standardization (CEN), Cyclic peptide
- CEN ISO/TR 21960:2020 Plastics - Environmental aspects - State of knowledge and methodologies (ISO/TR 21960:2020)
- EN 17832:2023 Thermal spraying - Determination of the feed rate with spray material in powder form in a production environment
Liaoning Provincial Standard of the People's Republic of China, Cyclic peptide
- DB21/T 2924-2018 Energy consumption limit of ring die granular biomass fuel press
Professional Standard - Machinery, Cyclic peptide
- JB/T 53175-2000 Product Quality Grading of Annular Valve Plates of Reciprocating Piston Compressors
- JB/T 2231.4-1999 Reciprocating piston compressor part-subassembly.Part 4:Ring-tpye valve plate
- JB/T 11670-2013 Specifications of wet-annualr internal expanding brake of walking tractor
- JB/T 2231.4-2013 Reciprocating piston compressor part-subassembly.Part 4:Metal ring valve plate
Indonesia Standards, Cyclic peptide
- SNI 04-3890.3-2000 Classification of enviromental condition - Part 3: Classification of group of enviromental parameters and their severities - Transportation
Professional Standard - Energy, Cyclic peptide
- NB/T 34018-2014 Specifications for biomass briquette equipments of ring type die
Professional Standard - Traffic, Cyclic peptide
- JT/T 715-2022 Road weather environment - Embedded road status sensor
- JT/T 715-2008 Road weather environment.Embedded road status sensor
Professional Standard - Electricity, Cyclic peptide
- DL/T 362-2010 Operation evaluation technical regulation of environmental protection equipment for coal-fired power plant
- DL/T 362-2016 Operation evaluation technical regulation of environmental protection equipment for thermal power plant
GM North America, Cyclic peptide
- GM GM9127P-1988 Resistance to Tuft Removal or Loop Pullout of Floor Coverings
NO-SN, Cyclic peptide
- NS 2673-1984 Aluminium/steel bolted joints - Countersunk and collar chloroprene rubber ferrules
National Health Commission of the People's Republic of China, Cyclic peptide
AIA/NAS - Aerospace Industries Association of America Inc., Cyclic peptide
- NASM45909-2016 STUD@ LOCKED IN@ RING LOCKED@ SERRATED@ GENERAL SPECIFICATION FOR (Rev 2)
IT-UNI, Cyclic peptide
KR-KS, Cyclic peptide
International Electrotechnical Commission (IEC), Cyclic peptide
- IEC 60635:1978/AMD1:1997 Amendment 1 - Toroidal strip-wound cores made of magnetically soft material
- IEC 61753-381-2:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment)
- IEC 61753-381-6:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment)
卫生健康委员会, Cyclic peptide
- WS/T 776-2020 Technical Specifications for Environmental Monitoring of Novel Coronavirus in Farmers’ (Trade) Markets
国家能源局, Cyclic peptide
- NB/T 10280-2019 Humid and hot environmental conditions and technical requirements for condition monitoring devices for power grids
Aerospace, Security and Defence Industries Association of Europe (ASD), Cyclic peptide
- ASD-STAN PREN 2607-1987 Aerospace Series Straight Metric-Size Unions with Locking Ring Configuration O-Ring Dimensions (Issue P 1)
AR-IRAM, Cyclic peptide
International Organization for Standardization (ISO), Cyclic peptide
- ISO 2231:1989 Rubber- or plastics-coated fabrics; standard atmospheres for conditioning and testing
- ISO 7315:1988 Aerospace; "P" clamps (loop clamps) for fluid systems; envelope dimensions
- ISO 10907-2:2007 Tools for moulding - Locating rings - Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
- ISO 9022-16:1994 Optics and optical instruments - Environmental test methods - Part 16: Combined bounce or steady-state acceleration, in dry heat or cold
IN-BIS, Cyclic peptide
- IS 13940-1994 Cardiovascular surgery instruments - clamps, bulldog, debakey, ring handle - shape and dimensions
American Water Works Association (AWWA), Cyclic peptide
- AWWA C620-2007 Spray-Applied In-Place Epoxy Lining of Water Pipelines, 3 In. (75 mm) and Larger
Heilongjiang Provincial Standard of the People's Republic of China, Cyclic peptide
- DB23/T 2752-2020 Occupational protection requirements for environmental protection practitioners in the prevention and control of the novel coronavirus epidemic
Jiangsu Provincial Standard of the People's Republic of China, Cyclic peptide
- DB32/T 3761.21-2020 Novel Coronavirus Pneumonia Epidemic Prevention and Control Technical Guidelines Part 21: Sanitation Workers
Henan Provincial Standard of the People's Republic of China, Cyclic peptide
- DB41/T 2252-2022 Technical specifications for the investigation of the basic environmental conditions of centralized groundwater drinking water sources