ZH
RU
ES

comparative assessment

comparative assessment, Total:176 items.

In the international standard classification, comparative assessment involves: Footwear, Vacuum technology, Air quality, Construction industry, Laboratory medicine, Optics and optical measurements, Paints and varnishes, Rubber, Veterinary medicine, Measurement of fluid flow, Electrical engineering in general, Water quality, Analytical chemistry, Electronic tubes, Textile fibres, Products of the textile industry, Products of the chemical industry, Metalliferous minerals, Measurement of volume, mass, density, viscosity, Protection against dangerous goods, Photography, Milk and milk products, Testing of metals, Petroleum products in general, Refractories, Electronic display devices, Services, Graphic technology, Acoustics and acoustic measurements, Medical equipment, Ceramics, Crude petroleum, Corrosion of metals, Quality, Protection against fire, Soil quality. Pedology, Fuels, Paint ingredients, Plastics, Aerospace fluid systems and components, Solar energy engineering, Microbiology, Metrology and measurement in general, Law. Administration, Fluid power systems, Road vehicle systems.

British Standards Institution (BSI), comparative assessment

BS 5131-6.1:1981 Methods of test for footwear and footwear materials - Codes of practice - Code of practice for the comparative evaluation by wear trial of materials, components or constructions
BS ISO 27893:2011 Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
BS IEC 62977-3-9:2023 Electronic displays. Evaluation of optical performance. Display sparkle contrast
BS EN ISO 14956:2002 Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
BS EN 16101:2012 Water quality. Guidance standard on interlaboratory comparison studies for ecological assessment
BS ISO 279:1998 Essential oils - Determination of relative density at 20 °C - Reference method
BS ISO 279:2001 Essential oils - Determination of relative density at 20 °C - Reference method
BS 1743-6.1:1983 Methods for analysis of dried milk and dried milk products - Assessment of the heat class of dried milk - Heat number method (reference method)
BS ISO 6421:2012 Hydrometry. Methods for assessment of reservoir sedimentation
BS 4938-1:1982 Dirt content of milk - Method for the determination of dirt content (reference method)
BS 5086-4:1985 Analysis of butter - Method for determination of salt content (reference method)
BS EN ISO 3747:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ
BS 4140-8:1986 Methods of test for aluminium oxide. Determination of absolute density using a pyknometer
BS DD CEN/TS 15414-1:2006 Solid recovered fuels - Determination of moisture content using the oven dry method - Determination of total moisture by a reference method
BS ISO 18314-5:2022 Analytical colorimetry - Procedure for colorimetric determination of colour differences of object colours according to equidistant colour spaces
BS 6248-4:1982 Caseins and caseinates - Method for determination of pH (reference method)
BS 6248-2:1982 Caseins and caseinates - Method for determination of 'fixed ash' of caseins (reference method)
BS 6248-8:1982 British Standard Caseins and caseinates - Part 8. Method for determination of water content (reference method)
BS ISO 11843-4:2003 Capability of detection - Methodology for comparing the minimum detectable value with a given value
BS EN ISO 6504-3:2007 Paints and varnishes - Determination of hiding power - Determination of contrast ratio of light-coloured paints at a fixed spreading rate
BS EN ISO 6504-3:2019 Tracked Changes. Paints and varnishes. Determination of hiding power. Determination of hiding power of paints for masonry, concrete and interior use
PD ISO/TS 18621-31:2020 Graphic technology. Image quality evaluation methods for printed matter. Evaluation of the perceived resolution of printing systems with the Contrast–Resolution chart

International Organization for Standardization (ISO), comparative assessment

ISO/TS 27893:2009 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
ISO 13226:2005 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
ISO 13226:1999 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
ISO 15769:2010 Hydrometry - Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
ISO 6421:2012 Hydrometry - Methods for assessment of reservoir sedimentation
ISO 279:1998 Essential oils - Determination of relative density at 20 °C - Reference method
ISO 27893:2011 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
ISO 6735:1985 Dried milk; Assessment of heat class; Heat-number reference method
ISO/TR 7517:1983 Coke; Comparison of different tests used to assess the physical strength
ISO/TS 19706:2004 Guidelines for assessing the fire threat to people
ISO 20462-2:2005 Photography - Psychophysical experimental methods for estimating image quality - Part 2: Triplet comparison method

European Committee for Standardization (CEN), comparative assessment

prEN 689-1992 Workplace atmospheres; guidance for the assessment of exposure to chemical agents for comparison with limit values and measurement strategy
EN 689:1995 Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy
EN 689:2018 Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values

Association Francaise de Normalisation, comparative assessment

NF X43-279:1995 Workplace atmospheres. Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy.
NF S99-512:2008 Biological evaluation of medical devices - Part 12 : sample preparation and reference materials.
NF T46-046:2011 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers.
NF X10-525*NF ISO 27893:2013 Vacuum technology - Vacuum gauges - Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
NF EN ISO 14956:2002 Qualité de l'air - Évaluation de l'aptitude à l'emploi d'une procédure de mesurage par comparaison avec une incertitude de mesure requise
NF EN ISO/IEC 17011:2017 Évaluation de la conformité - Exigences pour les organismes d'accréditation procédant à l'accréditation d'organismes d'évaluation de la conformité
NF T20-220:1973 Aluminium oxide primarily used for the production of aluminium. Determination of absolute density. Pyknometer method.
NF X08-012-1:2006 Colours - Colorimetry - Colorimetric characteristics of coloured samples - Part 1 : definitions and basic assessment principles.
NF EN ISO 18753:2017 Céramiques techniques - Détermination de la masse volumique absolue des poudres céramiques à l'aide d'un pycnomètre
NF EN ISO 17994:2014 Qualité de l'eau - Exigences pour la comparaison du rendement relatif des microorganismes par deux méthodes quantitatives
NF T90-462*NF EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
NF T30-505:1981 Thermosetting powder paints. Determination of density by means of an air pyknometer.

Group Standards of the People's Republic of China, comparative assessment

T/CECS 1127-2022 Public building energy consumption comparative evaluation method standard
T/CEEIA 417-2019 Electrical industry enterprise standard technology comparison evaluation guide general
T/GDAQI 84-2022 Methodological comparison and evaluation of the accuracy of in vitro diagnostic reagents
T/SHZSAQS 00089-2022 Odor inspectors regularly compare technical regulations
T/CEEIA 418-2019 Electrical industry enterprise standard technology comparison evaluation guide index system
T/NXSCJS 079-2023 Specifications for Preparation of Document Authentication Characteristics Comparison Table Part 2: Seal Authentication
T/NXSCJS 076-2023 Specification for Preparation of Comparison Table of Document Identification Characteristics Part 1: Handwriting Identification

National Metrological Verification Regulations of the People's Republic of China, comparative assessment

JJG 545-2015 Frequency Comparators
JJG 545-1988 Verification Regulation of Frequency Comparator
JJG(航天) 24-1987 Frequency difference multiplier (frequency standard comparator) Verification regulations

German Institute for Standardization, comparative assessment

DIN 6174:1979 Colorimetric Evaluation of Colour Differences of Surface Colours According to the CIELAB Formula
DIN 55981:1979 Determination of relative hue of near white specimens
DIN ISO 13226:2006 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2005) English version of DIN ISO 13226:2006-10
DIN ISO 13226:2015 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011)
DIN 6176:2001 Colorimetric evaluation of colour differences of surface colours according to DIN99-formula
DIN 53778-3:1983 Emulsion paints; determination of contrast ratio and lightness of coatings
DIN EN ISO 17994:2014-06 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO 17994:2014); German version EN ISO 17994:2014

Shandong Provincial Standard of the People's Republic of China, comparative assessment

DB37/T 4003-2020 Neutralization test and ELISA test comparison laboratory evaluation standard

ZA-SANS, comparative assessment

SANS 5327:1978 Pesticides: Comparative biological evaluation of the susceptibility of two strains of house-flies to insecticides
SANS 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies
SANS 17043:2010 Conformity assessment - General requirements for proficiency testing

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, comparative assessment

GB/T 23981-2009 Determination of contrast ratio of white and light coloured paints
GB/T 9270-1988 Determination of contrast ratio of light coloured paints (using polyester film)
GB/T 12682-1990 Test method for comparing colour stabilities of colour photographic images
GB/T 5211.19-1988 Determination of relative tinting strength and colour on reduction of coloured pigments--Visual comparison method

Lithuanian Standards Office , comparative assessment

LST EN 16101-2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment

Danish Standards Foundation, comparative assessment

DS/EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment

AENOR, comparative assessment

UNE-EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
UNE 48259:1992 PAINTS AND VARNISHES. DETERMINATION OF CONTRAST RATIO CHART METHOD.

AR-IRAM, comparative assessment

IRAM 5504-1949

RU-GOST R, comparative assessment

GOST 10554-1974 Reagents. Determination of copper with colorimetric methods
GOST 18862-1973 Kinescopes for black-and-white television. Method of contrast measurement
GOST R ISO 105-J02-1999 Textiles. Tests for colour fastness. Part J02. Instrumental assessment of relative whiteness
GOST 27700-1988 Alumina. Absolute density determination pycnometer method
GOST 33364-2015 Crude petroleum and liquid petroleum products. Determination of density, relative density and API gravity by hydrometer
GOST R IEC 61650-2007 Reliability in techniques. Procedures for comparison of constant failure rates and constant failure intensities
GOST 10555-1975 Reagents and high-purity matters. Colorimetric methods for determination of iron
GOST R ISO 14956-2007 Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
GOST R 55373-2012 Services to the public. Management of buildings. Terms, definitions and purpose of services. Comparison of services

ES-AENOR, comparative assessment

CZ-CSN, comparative assessment

CSN 68 4120-1979 Determination of cooper as impurity y colorimetric methods
CSN ISO 3968:1994 Hydraulic fluid power.Filters.Evaluation of pressure drop versus flow characteristics

YU-JUS, comparative assessment

JUS H.G8.012-1980 Reagents. Hydrochloric acid. Determirmtion ofabsolute demity. Hydrometer method
JUS H.B8.015-1981 Sulphuric acid for industrial u se. Determination ofabsolute density. Hydrometer method

TR-TSE, comparative assessment

TS 463-1967 DETERMINATION OF TOTAL SULPHUR ?N COAL BY THE STRAMBI METHOD
TS 646-1968 DETERMINATION OF CARBON AND HYDROGEN ?N COAL AND COKE BY THE LIEBIG METHOD
TS 1818-1975 METHODS FOR DETERMINING THE DENSITY AND RELAT?VE DENSITY (SPECIFIC GRAVITY) OF PLASTICS EXCLUDING CEL?. Ul.AR PLASTICS
TS 922-1971 ALUMINIUM OXIDE PRIMARILY USED FOP THE PRODL'CTION OF ALUMINIUM DETERMINATION OF ABSOLUTE DENSITY PYKNOMETER METHOD

Korean Agency for Technology and Standards (KATS), comparative assessment

KS H ISO 279:2011 Essential oils-Determination of relative density at 20 ℃-Reference method
KS H ISO 279:2014 Essential oils — Determination of relative density at 20 degrees C — Reference method
KS H ISO 6735:2006 Dried milk－Assessment of heat class－Heat-number reference method
KS A ISO 20462-2:2007 Photography－Psychophysical experimental methods for estimating image quality－Part 2：Triplet comparison method
KS M ISO 901:2003 Aluminium oxide primarily used for the production of aluminium－Determination of absolute density－Pyknometer method
KS M ISO 901-2003(2018)

SAE - SAE International, comparative assessment

SAE ARP1153A-1991 Method for Determining Relative Specific Gravity Polytetrafluoroethylene Tubing

Society of Automotive Engineers (SAE), comparative assessment

SAE ARP1153A-2014 Method for Determining Relative Specific Gravity Polytetrafluoroethylene Tubing
SAE ARP1153-1970 METHOD FOR DETERMINING RELATIVE SPECIFIC GRAVITY POLYTETRAFLUOROETHYLENE TUBING
SAE ARP1153A-1970 Method for Determining Relative Specific Gravity Polytetrafluoroethylene Tubing R(2001)
SAE J2470-2009 Hydraulic Fluid Power Valves Method for Assessing the Lock Sensitivity to Contaminants

VN-TCVN, comparative assessment

TCVN 7274-2003 The determination of arsenic in refined sugar products by a colorimetric method
TCVN 7276-2003 The determination of lead in sugar products by a colorimetric method
TCVN 7501-2005 Bitumen.Test method for determination of density (Pycnometer method)
TCVN 7259-2003 Fine cut tobacco.Determination of fine cut tobacco ratio by sieving method

American Society for Testing and Materials (ASTM), comparative assessment

ASTM D1217-93(2003)e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D7390-07(2012) Standard Guide for Evaluating Asbestos in Dust on Surfaces by Comparison Between Two Environments
ASTM C604-02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM D1217-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM F505-87(1997) Standard Practice for the Comparative Evaluation of the Imaging Properties of Liquid Electrostatic Toners
ASTM F505-87(2001) Standard Practice for the Comparative Evaluation of the Imaging Properties of Liquid Electrostatic Toners
ASTM F505-87(2006) Standard Practice for Comparative Evaluation of Imaging Properties of Liquid Electrostatic Toners
ASTM F596-82(2003) Standard Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners
ASTM F596-09 Standard Practice for Comparative Evaluation of the Imaging Properties of Dry Electrostatic Toners
ASTM E1647-16(2022) Standard Practice for Determining Contrast Sensitivity in Radiology
ASTM D1298-99 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-99e2 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1480-02e1 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D1480-02 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D129-64(1978) Standard Test Method for Sulfur In Petroleum Products (General Bomb Method)
ASTM D129-95 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
ASTM D1298-99(2005) Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-12b Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-12a Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-12 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1480-07 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM D12-88(1998) Hydrometer method to determine the density, relative density and API fuel specific gravity of crude oil and liquid petroleum products
ASTM D1298-85(1990)e1 Standard Practice for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1298-99e1 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D6642-01 Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
ASTM D6642-01(2006) Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
ASTM E1647-16 Standard Practice for Determining Contrast Sensitivity in Radiology
ASTM D1480-15 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer
ASTM E1647-03 Standard Practice for Determining Contrast Sensitivity in Radioscopy
ASTM E3002-15 Standard Practice for Assessing the Comparative Efficacy of Products Used for the Decontamination of Chemical Warfare Agents (CWAs) on Skin
ASTM D6446-99 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
ASTM D6446-01 Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels
ASTM D5472-93(2005) Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM D5472/D5472M-14 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well

U.S. Military Regulations and Norms, comparative assessment

ARMY MIL-STD-1170 VALID NOTICE 2-2009 Visual Standards and Comparison Methods for Evaluating Grain Configuration in 7.62 MM Cartridge Cases

American Society of Mechanical Engineers (ASME), comparative assessment

ASME STP-NU-078-2016 Comparison Report on Welding Qualification and Welding Quality Assurance

Professional Standard - China Metal Association, comparative assessment

CSM　01　01　02　05-2006 Uncertainty Evaluation of Measuring Result of Metal Charpy Impact Test
CSM 01 01 02 05-2006 Uncertainty Evaluation of Measuring Result of Metal Charpy Impact Test
CSM 01010205-2006 Uncertainty Evaluation of Measuring Result of Metal Charpy Impact Test

International Electrotechnical Commission (IEC), comparative assessment

IEC 62977-3-9:2023 Electronic displays - Part 3-9: Evaluation of optical performance - Display sparkle contrast

工业和信息化部, comparative assessment

JC/T 2528-2019 Method for determination of absolute density of fine ceramic powder: Pycnometer method

Professional Standard - Ferrous Metallurgy, comparative assessment

YB/T 4454-2015 Contrast test method for the corrosion rate of the embedded steel reinforcement in concrete exposed to the simulated marine enviroments

Standard Association of Australia （SAA）, comparative assessment

AS ISO/IEC 17011:2018 Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies
AS ISO/IEC 17040:2005 Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies

RO-ASRO, comparative assessment

STAS 11274-1979 VARNISHES AND PAINTS Determination of films colour by comparing with colour standard

National Aeronautics and Space Administration (NASA), comparative assessment

NASA NACA-TN-1671-1948 Effect of taper ratio on low-speed static and yawing stability derivatives of 45 degree sweptback wings with aspect ratio of 2.61

国家药监局, comparative assessment

YY/T 1766.2-2021 Image quality evaluation methods for X-ray computed tomography equipment Part 2: Low contrast resolution evaluation

Military Standard of the People's Republic of China-General Armament Department, comparative assessment

GJB 592.27-1990 Naval gun weapon system shooting effectiveness evaluation method for fixed target shooting evaluation method at sea
GJB 592.37-1991 Naval gun weapon system firing effectiveness assessment versus sea skimming missile firing assessment method
GJB 592.41-1991 Method for evaluating the shooting effectiveness of naval gun weapon systems and indirect shooting of targets on shore
GJB 592.29-1990 Naval gun weapon system shooting effectiveness assessment method for shooting at sea moving targets
GJB 592.39-1991 Method for evaluating the shooting effectiveness of naval gun weapon systems against direct shooting at shore targets

Japanese Industrial Standards Committee (JISC), comparative assessment

JIS B 9622:2000 Graphic technology -- Application of reflection densitometry and colorimetry to process control or evaluation of prints and proofs

Professional Standard - Aerospace, comparative assessment

QJ 3231-2005 Solid Rocket Motor Pair Reliability Evaluation

American National Standards Institute （ANSI), comparative assessment

ANSI/ASTM D792:2000 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (08.01)
ANSI/ASTM E973M:1996 Test Method for Determination of the Spectral Mismatch Parameter between a Photovoltaic Device and a Photovoltaic Reference Cell (Metric)

NL-NEN, comparative assessment

NEN 6311-1983 Vegetable and animal oils and fats Determination of the conventional mass by volume and of the relative density
NEN 6311-1993 Vegetable and animal oils and fats. Determination of the conventional mass by volume and of the relative density

BE-NBN, comparative assessment

NBN T 03-407-1983 Aluminium oxide primarily used for the production of aluminium - Determination of absolute density - Pyknometer method

Zhejiang Provincial Standard of the People's Republic of China, comparative assessment

DB3303/T 037-2021 Rules for Determining the Sampling Proportion of Supervision Objects Jointly "Double Random and One Open"

PL-PKN, comparative assessment

PN C04610-04-1990 Water and waste water Test for toxicity of pollutants to a?uatic organisms Determination of acute toxicity to Lebistes reticutatus Peters

CL-INN, comparative assessment

INDITECNOR 56-9ch-1960

CN-STDBOOK, comparative assessment

图书 3-9469 Acceptance of laws and regulations on conformity assessment accreditation

Professional Standard - Electron, comparative assessment

SJ/T 31435-1994 Requirements of readiness and methods of inspection and assessment for butt welder