ZH
RU
ES

The use of extensometer

The use of extensometer, Total:437 items.

In the international standard classification, The use of extensometer involves: Testing of metals, Paper and board, Rubber and plastics products, Products of the textile industry, Mechanical testing, Packaging materials and accessories, Plastics, Chipless working equipment, Iron and steel products, Cereals, pulses and derived products, Waxes, bituminous materials and other petroleum products, Construction materials, Wood-based panels, Road engineering, Conducting materials, Products of non-ferrous metals, Measurement of force, weight and pressure, Electrical wires and cables, Fasteners, Materials for aerospace construction, Aerospace fluid systems and components, Materials for the reinforcement of composites, Pipeline components and pipelines, Thermodynamics and temperature measurements, Non-ferrous metals, Domestic safety, Photography, Adhesives, Environmental protection, Protection of and in buildings, Structures of buildings, Aerospace electric equipment and systems, Reinforced plastics, Water quality, Ferrous metals, Measurement of volume, mass, density, viscosity, Coals, Surface treatment and coating, Shipbuilding and marine structures in general, Corrosion of metals, Cinematography, Analytical chemistry, Optics and optical measurements, Construction equipment, Welding, brazing and soldering, Farming and forestry, Electrical accessories, Miscellaneous domestic and commercial equipment, Birth control. Mechanical contraceptives, Clothes, Rubber, Elements of buildings, Cellular materials, Paper products, Storing. Warehousing, Ceramics, Information sciences. Publishing, Graphic technology, Bridge construction, Linear and angular measurements, Agricultural machines, implements and equipment.

Japanese Industrial Standards Committee (JISC), The use of extensometer

JIS B 7741:1991 Extensometers used in metallic material tensile testing
JIS K 7107:1987 Testing methods for chemical resistance of plastics under constant tensile deformation
JIS Z 2257:2021 Biaxial tensile testing method for sheet metals using a cruciform test piece
JIS H 7505:2004 Method for evaluation of tensile properties of metallic superplastic materials using R-type specimen
JIS Z 2253:1996 Method of determining the tensile strain hardening exponent for metallic sheet and strip
JIS A 1191:2004 Test method for tensile properties of fiber reinforced polymer (FRP) sheets for reinforcement of concrete

American National Standards Institute （ANSI), The use of extensometer

ANSI/TAPPI T494 om-2013 Tensile properties of paper and paperboard (using constant rate of elongation apparatus)
ANSI/ASTM F2018:2000 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The use of extensometer

GB/T 10003-2008 Biaxially orientaed polypropylene(BOPP) film for general use
GB/T 14615-2006 Wheat flour.Physical characteristics of doughs.Determination of rheological properties using an extensograph
GB 4706.43-1999 Safety of household and similar electrical appliances Particular requirements for projectors and similar appliances
GB 4706.43-2005 Household and similar electrical appliances.Safety.Particular requirements for projectors and similar appliances

Professional Standard - Military and Civilian Products, The use of extensometer

WJ 744-1994 Test method for tensile strength of adhesives for optical instruments

American Society for Testing and Materials (ASTM), The use of extensometer

ASTM D828-22 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM D4964-96(2008)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D1708-96 Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
ASTM D1708-02a Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
ASTM D1708-18 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D1708-06 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D1708-06a Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D6637-01(2009) Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
ASTM D6637/D6637M-15 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
ASTM B49-98(2004) Standard Specification for Copper Rod Drawing Stock for Electrical Purposes
ASTM D4649-20 Standard Guide for Use of Stretch Films and Wrapping Application
ASTM B233-97(2021) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
ASTM B233-97(2016) Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
ASTM C1860-22 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM D76/D76M-11 Standard Specification for Tensile Testing Machines for Textiles
ASTM B246-05(2010) Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
ASTM B246-00 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes
ASTM A449-07a Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
ASTM A449-14(2020) Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
ASTM D4649-03(2009) Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D7556-10(2019) Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
ASTM G49-85(2005) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM D4649-03 Standard Guide for Selection and Use of Stretch Wrap Films
ASTM D828-16 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM D828-16e1 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM B483/B483M-02 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
ASTM B483/B483M-00 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications
ASTM B483/B483M-21 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
ASTM A770/A770M-03(2012) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A770/A770M-86(2001) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A770/A770M-03 Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A770/A770M-86(1996) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A770/A770M-03(2018) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A770/A770M-03(2012)e1 Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
ASTM A1043/A1043M-18 Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
ASTM F2516-07 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
ASTM D2256-02(2008) Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D3107-07 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D2256/D2256M-21 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM F1093-99 Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
ASTM D7275-07 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)
ASTM D6931-07 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
ASTM D6931-12 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
ASTM F1093-99(2018) Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
ASTM D2256/D2256M-10(2015) Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM E2408-04 Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
ASTM E2408-04(2009) Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
ASTM E2408-04(2015) Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes
ASTM D4595-05 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D4595-86(1994) Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM G49-85(2000) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G49-85(2011) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G49-85(2019) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM D5083-10 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM E2529-06 Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM E2529-06(2014) Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM E1840-96(2022) Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM B598-09 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys
ASTM D4885-01 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4595/D4595M-23 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Method
ASTM D4885-01(2023) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4885-01(2018) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D6084-97 Standard Test Method for Elastic Recovery of bituminuous Materials by Ductilometer
ASTM D6084/D6084M-21 Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer
ASTM E1840-96(2002) Standard Guide for Raman Shift Standards for Spectrometer Calibration
ASTM C1860-19a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-21 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-19 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-18 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-20 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM D2095-96(2015) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D5083-10e1 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5083-02 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5083-96 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5083-08 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM B483/B483M-13e1 Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications
ASTM D3552-96e1 Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D3552-96(2007) Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D4885-01(2006) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4885-88(1995) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4885-01(2011) Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4595-09 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D4595-11 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D5083-17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5331-03(2016) Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
ASTM F1664-95 Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Tension Wire Used with Chain-Link Fence
ASTM F1664-01 Standard Specification for Poly(Vinyl Chloride) (PVC)-Coated Steel Tension Wire Used with Chain-Link Fence
ASTM C1683-08e1 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
ASTM C1683-10 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
ASTM F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D3826-98(2002) Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
ASTM D3826-98 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
ASTM C907-98 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C907-17(2018) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C907-17 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

Indonesia Standards, The use of extensometer

SNI 08-6330.2-2000 Test methods for stretch properties of knitted fabrics having low power
SNI 03-6836-2002 Test method of resilient modulus for asphalt mixture by indirect tensile

Korean Agency for Technology and Standards (KATS), The use of extensometer

KS K 0352-2019 Test method for stretch properties of stretch woven fabrics
KS B 5518-2002(2017) Extensometers used in metallic material tensile testing
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS D ISO 10543-2002(2013) Seamless and hot-stretch-reduced welded steel tubes for pressure purposes ― Full peripheral ultrasonic thickness testing
KS B 0801-2007(2017) Test pieces for tensile test for metallic materials
KS K 0419-2019 Test method for crimp recovery of stretch filament yarn
KS C 1611-1982(2017) Electronic Self-Balancing Recorders for Industrial Use
KS K 0521-2017 Textiles－Tensile properties of fabrics－Determination of maximum force and elongation at maximum force using the strip method
KS K 0520-2021 Textiles — Tensile properties of fabrics — Determination of maximum force and elongation at maximum force using the grab method
KS W ISO 1033:2002 Aircraft-Dimensions for general purpose push-pull three-pole circuit-breakers
KS W ISO 1033:2014 Aircraft－Dimensions for general purpose push-pull three-pole circuit-breakers
KS M ISO 6259-1:2008 Thermoplastics pipes-Determination of tensile properties-Part 1:General test method
KS M ISO 6259-1:2016 Thermoplastics pipes－Determination of tensile properties－Part 1：General test method
KS C IEC 60335-2-56-2013(2018) Household and similar electrical appliances－Safety－Part 2-56：Particular requirements for projectors and similar appliances
KS K ISO 13935-1:2009 Textiles-Seam tensile properties of fabrics and made-up textile articles-Part 1:Determination of maximum force to seam rupture using the strip method
KS K ISO 13935-1:2015 Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method
KS M ISO 6259-1-2016(2021) Thermoplastics pipes－Determination of tensile properties－Part 1：General test method
KS K ISO 2062:2012 Textiles-Yarns from packages-Determination of single-end breaking force and elongation at break using constant rate of extension(CRE) tester

GOSTR, The use of extensometer

GOST R 58406.6-2020 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for determination of tensile strength and limit of relative tensile strain
GOST R 59280-2020 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the fatigue endurance by indirect tensile test
GOST R 58401.7-2019 Automobile roads of general use. Asphalt mixtures and asphalt concrete for road pavement. Method for determination of creep compliance and strength with indirect tensile test (IDT)
PNST 353-2019 Automobile roads of general use. Expansion joints with rubber compensator of flights of road bridges. General specifications

British Standards Institution (BSI), The use of extensometer

BS EN 13891:2004 Tensional strapping - Guide to selection and use of tensional strapping
BS EN 13891:2003 Tensional strapping - Guide to selection and use of tensional strapping
20/30374680 DC BS EN ISO 5530-2. Wheat flour. Physical characteristics of doughs - Part 2. Determination of rheological properties using an extensograph
BS EN ISO 9073-18:2008 Textiles. Test methods for nonwovens. Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
BS ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
BS EN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
BS EN ISO 5530-2:2015 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using an extensograph
BS EN ISO 13934-1:2013 Textiles. Tensile properties of fabrics. Determination of maximum force and elongation at maximum force using the strip method
BS EN 13958:2008 Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification
BS EN ISO 29766:2022 Tracked Changes. Thermal insulating products for building applications. Determination of tensile strength parallel to faces
BS EN ISO 13934-2:2014 Textiles. Tensile properties of fabrics. Determination of maximum force using the grab method
BS ISO 24281:2021 Textiles. Biaxial tensile properties of woven fabric. Determination of maximum force and elongation at maximum force using the grab method
21/30398645 DC BS EN ISO 29766. Thermal insulating products for building applications. Determination of tensile strength parallel to faces
BS EN 10270-1:2011 Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire
BS EN 10270-1:2001 Steel wire for mechanical springs - Patented cold drawn unalloyed spring steel wire
BS EN 14488-4:2005 Testing sprayed concrete - Bond strength of cores by direct tension
BS EN ISO 10321:2009 Geosynthetics. Tensile test for joints/seams by wide-width strip method
BS EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method
BS EN 10270-1:2011+A1:2017 Steel wire for mechanical springs. Patented cold drawn unalloyed spring steel wire
BS EN 60320-3:2014+A2:2022 Appliance couplers for household and similar general purposes - Standard sheets and gauges
BS EN 10016-2:1995 Non-alloy steel rods for drawing and/or cold rolling - Specific requirements for general purpose rod
BS EN 10016-2:1995(1999) Non-alloy steel rods for drawing and/or cold rolling - Specific requirements for general purpose rod
21/30427867 DC BS EN ISO 24281. Textiles. Biaxial tensile properties of woven fabric. Determination of maximum force and elongation at maximum force using the grab method
BS EN 12311-2:2000 Flexible sheets for waterproofing - Determination of tensile properties - Plastic and rubber sheets for roof waterproofing
BS EN 12311-2:2013 Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing
BS EN 302-1:2023 Adhesives for load-bearing timber structures. Test methods - Determination of longitudinal tensile shear strength

Association Francaise de Normalisation, The use of extensometer

NF R15-515:1995 Road vehicules. Apparatus for belt measurement and tensioning. Test method.
NF EN 205:2016 Adhésifs - Colles pour bois à usages non structuraux - Détermination de la résistance au cisaillement en traction des joints à recouvrement
NF T54-196-2:1998 Plastiques - Films étirables - Partie 2 : détermination de l'aptitude à l'emploi des films étirables pour banderolage hélicoïdal.
NF T66-038*NF EN 13587:2017 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
NF V03-717-2*NF EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2 : determination of rheological properties using a extensograph
NF EN ISO 5530-2:2015 Farines de blé tendre - Caractéristiques physiques des pâtes - Partie 2 : détermination des caractéristiques rhéologiques au moyen de l'extensographe
NF G30-104-1:1994 Textiles. Flat extensible medical bandages. Part 1 : tensile strength for a specified extension
NF EN 13587:2017 Bitumes et liants bitumineux - Détermination des caractéristiques de traction des liants bitumineux par la méthode d'essai de traction
NF B51-018:1988 Wood. Tensile parallel to grain. Determination of modulus of elasticity in tensile parallel to grain using small clear specimens.
NF B51-017:1988 Wood. Tensile parallel to grain. Determination of ultimate tensile stress parallel to grain using small clear specimens.
NF A03-003:1994 Metallic materials. Tensile test. Part 3 : calibration of force proving instruments used for the verification of uniaxial testing machines.
NF G30-104-2:1994 Textiles. Flat extensible medical bandages. Part 2 : tensile strength after accelerated ageing
NF EN 1896:2001 Adhésifs pour papier et carton, emballage et produits sanitaires jetables - Détermination de la résistance à la traction et de l'allongement
NF EN ISO 29766:2022 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance à la traction parallèlement aux faces
NF EN 1607:2013 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance à la traction perpendiculairement aux faces
NF G38-116*NF EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method
NF H02-011*NF EN 13247:2001 Packaging - Specification for tensional steel strapping for lifting, lashing and securing of loads
NF T54-424*NF EN 14932:2018 Plastics - Thermoplastic stretch films for wrapping silage bales
NF P84-501:1992 Géomembranes - Dispositif d'étanchéité par géomembranes (DEG) - Détermination des caractéristiques en traction
NF EN ISO 13934-1:2013 Textiles - Propriétés des étoffes en traction - Partie 1 : détermination de la force maximale et de l'allongement à la force maximale par la méthode sur bande
NF A50-650-3:1997 Aluminium and aluminium alloys. Drawing stock. Part 3 : specific requirements for mechanical uses (excluding welding).
NF L17-956:1995 Aircraft industry. Synthetic cloths for the fabric of airplane structures. Determination of the load and elongation at rupture by tensile testing of cloths in delivery condition and of free coated cloths.
NF EN ISO 6259-1:2015 Tubes en matières thermoplastiques - Détermination des caractéristiques en traction - Partie 1 : méthode générale d'essai
NF Q34-015:1985 Sanitary and domestic articles. Napkins, all-in-one nappies, sanitary towels and similar disposable. Determination of tensile strength and wet test of elongation of nonwowen protectives tissus.
NF G07-129-1*NF EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1 : determination of maximum force and elongation at maximum force using the strip method
NF EN ISO 22776:2005 Chaussures - Méthodes d'essai pour accessoires : fermetures auto-agrippantes - Résistance à la traction avant et après un usage répété
NF G07-129-2*NF EN ISO 13934-2:2014 Textiles - Tensile properties of fabrics - Part 2 : determination of maximum force using the grab method
NF G07-118-1*NF EN ISO 13935-1:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1 : determination of maximum force to seam rupture using the strip method
NF A03-004:1995 Metallic materials. Tensile test. Part 4 : verification of extensometers used in uniaxial testing.
NF T54-955-1*NF EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1 : general test method
NF T66-006*NF EN 13589:2018 Bitumen and Bituminous Binders - Determination of tensile properties of modified bitumen by the force ductility method
NF EN ISO 2062:2010 Textiles - Fils sur enroulements - Détermination de la force de rupture et de l'allongement à la rupture des fils individuels à l'aide d'un appareil d'essai à vitesse constante d'allongement

International Organization for Standardization (ISO), The use of extensometer

ISO 527-1:1993/Amd 1:2005 Plastics - Determination of tensile properties - Part 1: General principles; Amendment 1: Details of extensometer
ISO 5530-2:2020 Wheat flour — Physical characteristics of doughs — Part 2: Determination of rheological properties using an extensograph
ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO 3574:1976 Cold-reduced carbon steel sheet of commercial and drawing qualities
ISO/R 147:1960 Load calibration of testing machines for tensile testing of steel
ISO 3573:1976 Hot-rolled carbon steel sheet of commercial and drawing qualities
ISO 3573:2008 Hot-rolled carbon steel sheet of commercial and drawing qualities
ISO 3573:2012 Hot-rolled carbon steel sheet of commercial and drawing qualities
ISO 16241:2005 Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
ISO 29766:2008 Thermal insulating products for building applications - Determination of tensile strength parallel to faces
ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method
ISO 29766:2022 Thermal insulating products for building applications — Determination of tensile strength parallel to faces
ISO 24281:2021 Textiles - Biaxial tensile properties of woven fabric - Determination of maximum force and elongation at maximum force using the grab method
ISO 5950:1979 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 1033:1975 Aircraft; Dimensions for general purpose push-pull three-pole circuit-breakers
ISO 14272:2000 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
ISO 6043:1985 Shipbuilding and marine structures; Eye and fork assemblies under tension load; Main dimensions
ISO 1467:1973 General purpose push-pull single-pole circuit- breakers for aircraft; Performance requirements
ISO 1509:1973 General purpose push-pull three-pole circuit-breakers for aircraft; Performance requirements
ISO 4999:1978 Continuous hot-dip terne (lead alloy) coated cold reduced carbon steel sheet of commercial and drawing qualities
ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 2062:2009 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
ISO 13934-2:2014 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method

CZ-CSN, The use of extensometer

CSN 22 7523-1975 Sintered carbide drawing dies for dry drawing of steel wires with strength above 1 100 mpa (1100 N/mm-2). Dimensions
CSN 42 6410-1969 Drawn steel wire for general purposes
CSN 22 7330-1962 Progressive drawing dies forround drawn products.Design rules
CSN 42 0329-1964 Cylindrical test pieces for tensile testing of grey cast iron
CSN 42 0336-1982 Copper-base alloy casting. Test samples and test pieces for tensile test
CSN 79 3820-1977 Testiug of leathers and furs. Tensile strength, elongation by specified load and elongation of break of leathers and furs
CSN 42 0314-1980 Metal testing. Test pieces of circular cross-section with heads for holding rings for tensile testing of metals
CSN 42 0316-1980 Metal testing. Test pieces circular cross-section with screwed gripped heads for the tensile testing of metals
CSN 42 0315-1980 Metal testing. Test pieces of circular cross-section with cylindrical gripped heads for tensile testing of metals
CSN 42 0317-1980 Metal testing. Test pieces of circular cross-section with upset gripped heads for tensile testing of metals
CSN 42 0331-1985 Metal testing. Test pieces of circular cross-section with cylindrical gripped heads for tensile testing of malleable cast iron
CSN 42 0320-1963 Test pieces of rectangular cross-section, thickness greater than 0,1 & less than 4 mm for tensile testing of metals

German Institute for Standardization, The use of extensometer

DIN EN ISO 5530-2:2020-06 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020 / Note: Date of issue 2020-05-08*Intended as replacement for...
DIN EN ISO 5530-2:2015-03 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012); German version EN ISO 5530-2:2014 / Note: To be replaced by DIN EN ISO 5530-2 (2020-06).
DIN EN ISO 13934-2:2014 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014); German version EN ISO 13934-2:2014
DIN EN ISO 5530-2:2020 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020
DIN 53835-3:1981 Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant extension limits
DIN 53835-2:1981 Testing of textiles; determination of the elastic behaviour of single and plied elastomeric yarns by repeated application of tensile load between constant extension limits
DIN 53835-1:1987 Testing of textiles; tensile test for testing the elastic behaviour; principles
DIN EN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation; German version EN 1896:2001
DIN EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008); German version EN ISO 10321:2008
DIN EN 14932:2018-03 Plastics - Thermoplastic stretch films for wrapping silage bales; German version EN 14932:2018
DIN EN 1607:2013-05 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces; German version EN 1607:2013
DIN EN 14932:2018 Plastics - Thermoplastic stretch films for wrapping silage bales
DIN 48085-2:1985-04 Compression connectors, restistant to high tensile stresses, for aluminium-conductors / Note: To be replaced by DIN VDE 0212-485 (2022-08).
DIN 51214:2009-08 Testing of Steel - Tensile test for round wires using knotted specimens
DIN EN ISO 29766:2023-02 Thermal insulating products for building applications - Determination of tensile strength parallel to faces (ISO 29766:2022); German version EN ISO 29766:2022
DIN EN ISO 13935-2:2014 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014); German version EN ISO 13935-2:2014
DIN EN ISO 13935-2:1999 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:1999); German version EN ISO 13935-2:1999
DIN 53835-1:1987-01 Testing of textiles; tensile test for testing the elastic behaviour; principles
DIN EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012); German version EN ISO 5530-2:2014
DIN 54514:2008 Testing of paper and board - Determination of the initial wet web strength by tensile test
DIN EN ISO 13934-1:2013-08 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013); German version EN ISO 13934-1:2013
DIN EN 1896:2001-04 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation; German version EN 1896:2001
DIN 50002-1:2020-03 Adhesive bondings in electronic applications - Bonding strength on surfaces - Part 1: Tensile test
DIN ISO 2285:2010 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load (ISO 2285:2007)
DIN EN 13587:2010 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method; German version EN 13587:2010
DIN EN 13587:2017 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method; German version EN 13587:2016
DIN EN ISO 13934-2:2014-06 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014); German version EN ISO 13934-2:2014
DIN EN ISO 6259-1:2015-08 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015); German and English version EN ISO 6259-1:2015
DIN 53835-4:1981 Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant force limits

SAE - SAE International, The use of extensometer

SAE AMS3892/12A-2016 Tow@ Carbon Fiber For Structural Composites 730 (5033) Tensile Strength@ 41 (283) Tensile Modulus
SAE AMS3892/11B-2016 Tow@ Carbon Fiber For Structural Composites 450 (3103) Tensile Strength@ 32 (221) Tensile Modulus
SAE AMS3892/9C-2016 Tow@ Carbon Fiber for Structural Composites 500 (3447) Tensile Strength@ 32 (221) Tensile Modulus
SAE AMS3892/10B-2016 Tow@ Carbon Fiber For Structural Composites 550 (3792) Tensile Strength@ 38 (262) Tensile Modulus
SAE AMS3892/2C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength@ 50 (345) Tensile Modulus
SAE AMS3892/4C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength@ 75 (517) Tensile Modulus
SAE AMS3892/6B-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength@ 57 (393) Tensile Modulus
SAE AMS3892/5C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength@ 75 (517) Tensile Modulus
SAE AMS3892/3C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength@ 40 (276) Tensile Modulus
SAE AMS3892/1C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength@ 33 (228) Tensile Modulus
SAE AMS3892/7B-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength@ 33 (228) Tensile Modulus
SAE AMS3892/8B-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength@ 40 (276) Tensile Modulus
SAE AMS3278B-2016 Sealing and Coating Compound: Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose

Society of Automotive Engineers (SAE), The use of extensometer

SAE AMS3892/11-1988 TOW, CARBON FIBER For Structural Composites 450 (3100) Tensile Strength, 32,000,000 (221) Tensile Modulus
SAE AMS3892/9B-2005 Tow, Carbon Fiber For Structural Composites 500 (3447) Tensile Strength, 32 (221) Tensile Modulus
SAE AMS3892/10A-2005 Tow, Carbon Fiber For Structural Composites 550 (3792) Tensile Strength, 38 (262) Tensile Modulus
SAE AMS3892/11A-2005 Tow, Carbon Fiber For Structural Composites 450 (3103) Tensile Strength, 32 (221) Tensile Modulus
SAE AMS3892/5-1973 GRAPHITE FIBERS For Structural Composites GF 220 (1517) Tensile Strength, 70,000,000 (483) Tensile Modulus
SAE AMS3892/12-2005 Tow, Carbon Fiber For Structural Composites 730 (5033) Tensile Strength, 41 (283) Tensile Modulus
SAE AMS3892/1-1972 TOW, GRAPHITE FIBERS For Structural Composites GT 350 (2413) Tensile Strength, 30,000,000 (207) Tensile Modulus
SAE AMS3892/2-1972 TOW, GRAPHITE FIBERS For Structural Composites GT 300 (2069) Tensile Strength, 50,000,000 (345) Tensile Modulus
SAE AMS3892/3-1972 TOW, GRAPHITE FIBERS For Structural Composites GT 350 (2413) Tensile Strength, 38,000,000 (262) Tensile Modulus
SAE AMS3892/3B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
SAE AMS3892/4B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS3892/2B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 50 (345) Tensile Modulus
SAE AMS3892/1B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/5B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS3892/6A-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus
SAE AMS3892/7A-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/8A-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
SAE AMS3901/3-1992 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 1140 Denier
SAE AMS3892/3A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 400 (2760) Tensile Strength, 40 (275) Tensile Modulus
SAE AMS3892/6-1984 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 325 (2240) Tensile Strength, 57 (395) Tensile Modulus
SAE AMS3901/6-1974 ROVING, ORGANIC FIBER For Structural Composites OR 450,000 (3100) Tensile Strength, 17,500,000 (121) Tensile Modulus 4560 Denier
SAE AMS3892/1A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 400 (2760) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/5A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 220 (1515) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS3901/4-1974 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 1420 Denier
SAE AMS3901/2-1974 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 380 Denier
SAE AMS3901/5-1974 ROVING, ORGANIC FIBER For Structural Composites OR 450,000 (3100) Tensile Strength, 17,500,000 (121) Tensile Modulus 7100 Denier
SAE AMS3901/1-1974 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 195 Denier
SAE AMS3892/4A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 300 (2070) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS-WW-T-700-2001 Tube, Aluminum and Aluminum Alloy, Drawn, Seamless, General Specification for
SAE AMS3892/7-1984 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF (OX) 400 (2760) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/8-1984 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF (OX) 400 (2760) Tensile Strength, 40 (275) Tensile Modulus
SAE AMS3892/4-1974 GRAPHITE FIBER For Structural Composites GY 70,000,000 (470) Tensile Modulus
SAE AMS3278A-2008 Sealing and Coating Compound: Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose
SAE AMS4344C-2006 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Staightened,, and Overaged UNS A97175
SAE AMS4341E-2006 Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged UNS A97050
SAE AMS3278C-2022 Sealing and Coating Compound, Polyurethane (PUR) Fuel Resistant, High Tensile Strength/Elongation for Integral Fuel Tanks/Fuel Cavities/General Purpose

ES-AENOR, The use of extensometer

Danish Standards Foundation, The use of extensometer

DS/EN 13587:2010 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
DS/ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
DS/EN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
DS 438.15:1984 Test method for the structural use of brickwork. Determination of the tensile strength in bending of brickwork
DS/EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
DS/EN 60335-2-56/A1:2008 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
DS/EN 60335-2-56:2003 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
DS/EN 12311-1:2000 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
DS/EN ISO 6259-1:2002 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
DS/EN 14932:2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
DS/EN ISO 13934-2:1999 Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method
DS/EN 13589:2008 Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method
DS/EN 205:1994 Test methods for wood adhesives for non-structural applications-Determination of tensile shear strength of lap joints

Lithuanian Standards Office , The use of extensometer

LST EN 13587-2010 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
LST ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012, identical)
LST EN 1896-2002 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
LST EN 12311-1-2001 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
LST EN ISO 13934-1:2000 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:1999)
LST EN 14932-2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
LST EN 13589-2008 Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method

AENOR, The use of extensometer

UNE-EN 13587:2017 Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method
UNE-EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012)
UNE-EN 1896:2001 ADHESIVES FOR PAPPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS . DETERMINATION OF TENSILE STRENGTH AND ELONGATION.
UNE 82502:2007 Instruments intended to measure braking forces in service motor vehicles: Roller brake meters.
UNE 25003:1978 DRAW HOOK COUPLING FOR RAILBOUND VEHICLES OF SPANISH NORMAL WIDTH. MINIMUM TENSILE STRENGTH, 85 T.
UNE 68029:1983 AGRICULTURAL TRACTORS AND MACHINERY. HIDRAULIC COUPLERS FOR GENERAL PURPOSES. SPECIFICATIONS
UNE-EN 60335-2-56:2005 Household and similar electrical appliances - Safety -- Part 2-56: Particular requirements for projectors and similar appliances
UNE-EN 60335-2-56:2005/A1:2008 Household and similar electrical appliances - Safety -- Part 2-56: Particular requirements for projectors and similar appliances
UNE-EN 60335-2-56:2005/A2:2014 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
UNE-EN 12311-1:2000 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
UNE-EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013)
UNE-EN 14932:2007 Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
UNE-EN 13589:2008 Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method

TR-TSE, The use of extensometer

TS 246-1965 METHOD OF DETERM1NING THE TENSILE STRENGTH, ELONGATION AND COUNT-STRENGTH PRODUCT OF YARN SKENS, BY THE CONSTANT SPEED DYNAMOMETER

VN-TCVN, The use of extensometer

TCVN 7848-2-2015 Wheat flour - Physical characteristics of doughs .Part 2:Determination of rheological properties using an extensograph
TCVN 5699-2-56-2007 Household and similar electrical appliances.Safety.Part 2-56: Particular requirements for projectors and similar appliances

The American Road & Transportation Builders Association, The use of extensometer

AASHTO TP 88-2010 Standard Method of Test for Evaluation of the Low-Temperature Tensile Property of Bituminous Sealants by Direct Tension Test

AASHTO - American Association of State Highway and Transportation Officials, The use of extensometer

TP 88-2010 Standard Method of Test for Evaluation of the Low-Temperature Tensile Property of Bituminous Sealants by Direct Tension Test
TP31-1996 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension

KR-KS, The use of extensometer

KS F 2157-2-2023 Method of tension test for structural wood-based panels
KS V ISO 6043-2013(2023) Shipbuilding and marine structures — Eye and fork assemblies under tension load — Main dimensions
KS M ISO 6259-1-2016 Thermoplastics pipes－Determination of tensile properties－Part 1：General test method

RU-GOST R, The use of extensometer

PNST 136-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the tensile strength and stiffness
GOST R 56339-2015 Automobile roads of general use. Geosynthetic for road construction. Determination of the Tensile Creep and Creep Rupture Behavior
GOST 29104.22-1991 Industrial fabrics. Method for determination of complete elongation components under load which is less than breaking load
GOST 29104.8-1991 Industrial fabrics. Method for determination of strength and strength under ball forcing
GOST R ISO 13934-1-2015 Textiles. Tensile properties of fabrics. Part 1. Determination of maximum force and elongation at maximum force using the strip method
GOST R 56785-2015 Polymer composites. Test method for tensile of flat specimens
GOST 32991-2014 Pechora basin coals for power technological purposes. Specifications
GOST ISO 13934-1-2021 Textiles. Tensile properties of fabrics. Part 1. Determination of maximum force and elongation at maximum force using the strip method
GOST IEC 60335-2-56-2013 Safety of household and similar electrical appliances. Part 2-56. Particular requirements for projectors and similar appliances
GOST EN 1607-2011 Thermal insulating products for building applications. Method for determination of tensile strength perpendicular to faces
GOST R EN 1607-2008 Thermal insulating products for building applications. Method for determination of tensile strength perpendicular to faces
GOST R EN 1608-2008 Thermal insulating products for building applications. Method for determination of tensile strength parallel to faces
GOST EN 1608-2011 Thermal insulating products for building applications. Method for determination of tensile strength parallel to faces
GOST 23117-1991 Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications
GOST R 57852-2017 Composites. Method for determination of test specimens bending under tensile and compressive forces application
GOST R 57267-2016 Polymer composites system for external reinforcement. Test method for determining tensile properties
GOST 3489.29-1971 Printing types. Type families "Kudriashovskaya entsiklopedicheskaya" and "Kudriashovskaya entsiklopedicheskaya rublenaya" ( for alphabets of russian and roman graphic bases). Range of application. Design. Base line. Characters per 4 picas
GOST R 59629-2021 Automobile roads of general use. Cable-stayed systems of bridge structures. Operation requirements
GOST R ISO 13934-2-2017 Textiles. Tensile properties of fabrics. Part 2. Determination of maximum force using the grab method
GOST R 51409-1999 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using an extensograph

European Committee for Standardization (CEN), The use of extensometer

EN 10002-3:1994 Metallic Materials - Tensile Test - Part 3: Calibration of Force Proving Instruments Used for the Verification of Uniaxial Testing Machines
FprEN ISO 5530-2 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/FDIS 5530-2:2021)
EN 10002-4:1994 Metallic Materials - Tensile Test - Part 4: Verification of Extensometers Used in Uniaxial Testing
EN ISO 5530-2:2014 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
EN 1896:2001 Adhesives for paper and board, packaging and disposable sanitary products - Determination of tensile strength and elongation
EN ISO 29766:2022 Thermal insulating products for building applications - Determination of tensile strength parallel to faces (ISO 29766:2022)
EN ISO 10321:2008 Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008)
EN 13958:2008 Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification
EN 13958:2003 Aluminium and aluminium alloys Cold drawn, round, coiled tube for general applications Specification
EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
prEN 524-5-1991 Steel strip sheaths for prestressing tendons; methods of test, determination of tensile load resistance

IN-BIS, The use of extensometer

IS 12516 Pt.2-1988

HU-MSZT, The use of extensometer

SE-SIS, The use of extensometer

SIS MNC 915-1991 Steels for cold rolled sheet for lock-forming and drawing — Summary
SIS 11 26 59-1970 Tensile test for round wire using knotted specimens
SIS 11 21 16 E-1963 Dragprovstavar typ F
SIS SS 11 21 13-1986 Metallic materials — Tensile test pieces for screwed holders — Round test pieces type C
SIS SS 11 01 19-1985 Alloy steels and non-alloy and alloy steels intended for heat-treatment - Sampling for tens i le testing

PL-PKN, The use of extensometer

PN BN 6141-02-1964

BELST, The use of extensometer

STB 1388-2019 Tractor share ploughs for general purpose. General specifications

PT-IPQ, The use of extensometer

NP 2144-1987
NP EN 524-5-2000 Steel strip sheaths for prestressing tendons Test methods Part 5:Determination of tensile load resistance

(U.S.) Ford Automotive Standards, The use of extensometer

FORD WSS-M99D68-A1-2013 THERMOPLASTIC PROPERTY DETERMINATION FOR CAE, HIGH STRAIN RATE TENSILE, CREEP AND TENSILE MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***

ESDU - Engineering Sciences Data Unit, The use of extensometer

ESDU 83002-1982 Allowable stresses for helical compression and tension springs of round wire.
STRUCT 02.04.04 A-1980 Initial buckling of flat plates under bending and compression or tension.
ESDU 82022-1982 Endurance of steel lugs with clearance-fit pins. (Tensile mean stress.)

Group Standards of the People's Republic of China, The use of extensometer

T/GZZJ 06-2020 Determination of tensile properties of polylactic acid filaments for 3D printing

ZA-SANS, The use of extensometer

SANS 6161:2005 Non-recoverable extension of textile floor coverings as imposed by mechanical action

ES-UNE, The use of extensometer

UNE-EN 3745-505:2018 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength (Endorsed by Asociación Española de Normalización in September of 2018.)
UNE-EN 14932:2018 Plastics - Thermoplastic stretch films for wrapping silage bales
UNE-EN ISO 29766:2023 Thermal insulating products for building applications - Determination of tensile strength parallel to faces (ISO 29766:2022)
UNE-EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)

Standard Association of Australia （SAA）, The use of extensometer

AS 4828.2:2008 Degradability of plastics - Methods of test - Determination of brittle point in plastic film using a tensile elongation test
AS 3181:1995 Approval and test specification-- electrically operated projectors for household and similar use

GM Holden Ltd, The use of extensometer

HOLDEN HN 0290-2012 Test for Elongation and Stretch Set of Automotive Fabrics Do Not Use on New Programs, No Replacement. Limited for current use

BE-NBN, The use of extensometer

NBN 266-1953
NBN-EN 205-1995 Test methods for wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints

CH-SNV, The use of extensometer

SNV 95821-1948

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The use of extensometer

GB/T 33157-2016 Thermal insulating products for building applications—Determination of tensile strength parallel to faces

RO-ASRO, The use of extensometer

STAS 9538/4-1974 PAPER FOR CHROMATOGRAPHY AND ELECTROPHORESIS Determation of wet tensile breaking strength
STAS 1369-1990 Cotton and drawn polyesteric filament yarns thread for leather garments
STAS 10159-1975 Machine retaining devices EYE BOLT FOR TENSIONING DRAW SPRINGS Dimensions
STAS 6605-1978 Tests of metals TENSILE TESTING OF REINFORCED STEEL, WIRE AND WIRE PRODUCTS FOR PRESTRESSED CONCRETE
STAS SR ISO 6043:1995 Shipbuilding and marine structures - Eye and fork assemblies under tension load - Main dimensions
STAS SR ISO 8009-5:1996 Reusable rubber contraceptive diaphragms - Part 5: Determination of tensile properties

Aerospace Industries Association, The use of extensometer

AIA NAS 1348-1979 (Inactive)Fasteners - Recommended Tensile Stress Areas for External Threaded (Rev. 1)

Institute of Electrical and Electronics Engineers (IEEE), The use of extensometer

IEEE 1210/COR 1-2014 Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable Corrigendum 1

IT-UNI, The use of extensometer

Hubei Provincial Standard of the People's Republic of China, The use of extensometer

DB42/T 2070-2023 Magnetostrictive guided wave detection method and evaluation of corroded and broken wires in bridge cables

International Electrotechnical Commission (IEC), The use of extensometer

IEC 60335-2-56:2002/AMD2:2014 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60335-2-56:2014 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances
IEC 60335-2-56:2002/AMD1:2008 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances

AT-ON, The use of extensometer

ONORM F 4021-1989 Two part extension ladder made from light metal for fire fighting purposes; requirements, testing, marking of conformity
ONORM F 4022-1989 Three part extension ladder made from light metal for fire fighting purposes; requirements, testing, marking of conformity

未注明发布机构, The use of extensometer

BS 6319-7:1985(1999) Testing of resin compositions for use in construction — Part 7 : Method for measurement of tensile strength

Canadian Standards Association (CSA), The use of extensometer

CSA G4-92-CAN/CSA-1992 Cables D碅cier Pour Utilisation Generale Ainsi Que Pour L碋xtraction Et Le Halage Dans Les Mines Fiche No 1
CAN/CSA-C22.2 NO.60335-2-56-2015 Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances (Third Edition)

VE-FONDONORMA, The use of extensometer

NORVEN 64-4-1967

CEN - European Committee for Standardization, The use of extensometer

EN ISO 527-3:2018 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets