ZH

RU

ES

UV Calibration Operating Instructions

UV Calibration Operating Instructions, Total:95 items.

In the international standard classification, UV Calibration Operating Instructions involves: Plastics, Air quality, Measurement of volume, mass, density, viscosity, Paints and varnishes, Analytical chemistry, Environmental testing, Thermodynamics and temperature measurements, Optics and optical measurements, Pumps, Sports equipment and facilities, Linear and angular measurements, Road engineering, Mechanical testing, Footwear, Radiation measurements, Protective equipment, Products of the textile industry, Office machines, Iron and steel products, Medical equipment, Road vehicle systems, Non-destructive testing, Microbiology, Adhesives, Rubber and plastics products, Metrology and measurement in general, Meat, meat products and other animal produce, Protection of and in buildings, Fuels.


American Society for Testing and Materials (ASTM), UV Calibration Operating Instructions

  • ASTM D4329-13 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
  • ASTM D5110-98(2010) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D3732-82(2011) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
  • ASTM G224-23 Standard Practice for Operating UVC Lamp Apparatus for Exposure of Materials
  • ASTM E169-99 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
  • ASTM G154-23 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials
  • ASTM G154-16 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
  • ASTM E2847-11 Standard Practice for 65279; 65279;Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM E1079-00 Standard Practice for Calibration of Transmission Densitometers
  • ASTM D4178-82(2017) Standard Practice for Calibrating Moisture Analyzers
  • ASTM G154-04 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
  • ASTM G154-12a Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
  • ASTM G154-12 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
  • ASTM E275-08(2013) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
  • ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM D5337-11 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
  • ASTM F2940-13 Standard Practice for Air Soft Field Operation
  • ASTM D1435-13 Standard Practice for Outdoor Weathering of Plastics
  • ASTM D5337-97 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
  • ASTM D5337-11(2016) Standard Practice for Flow Rate Adjustment of Personal Sampling Pumps
  • ASTM D1435-05 Standard Practice for Outdoor Weathering of Plastics
  • ASTM F2508-11 Standard Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces
  • ASTM D6205-06 Standard Practice for Calibration of the James Static Coefficient of Friction Machine
  • ASTM D6205-98 Standard Practice for Calibration of the James Static Coefficient of Friction Machine
  • ASTM D6205-12 Standard Practice for Calibration of the James Static Coefficient of Friction Machine
  • ASTM G154-06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
  • ASTM G154-00ae1 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
  • ASTM G154-00a Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
  • ASTM G154-00 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
  • ASTM G183-05(2010) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
  • ASTM D6544-00 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
  • ASTM D6544-00(2007) Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
  • ASTM F2508-13 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
  • ASTM F2508-12a Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
  • ASTM F396-00 Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
  • ASTM F396-00(2004) Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
  • ASTM E925-09(2022) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
  • ASTM A802/A802M-95(2010)e1 Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
  • ASTM D5110-22 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-22a Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-98(2017) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM E925-83(1994)e1 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM D1014-95 Standard Practice for Conducting Exterior Exposure Tests of Paints on Steel
  • ASTM E168-99 Standard Practices for General Techniques of Infrared Quantitative Analysis
  • ASTM E334-01 Standard Practice for General Techniques of Infrared Microanalysis
  • ASTM E168-06 Standard Practices for General Techniques of Infrared Quantitative Analysis
  • ASTM E334-01(2007) Standard Practice for General Techniques of Infrared Microanalysis
  • ASTM E925-09(2014) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
  • ASTM D5280-96(2007) Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
  • ASTM F629-11 Standard Practice for Radiography of Cast Metallic Surgical Implants
  • ASTM E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM F86-00 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
  • ASTM F86-04 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
  • ASTM F86-12 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
  • ASTM F86-12a Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants
  • ASTM C1590-21 Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
  • ASTM C1590-04(2014) Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry
  • ASTM E2063-05(2011) Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
  • ASTM E2108-00 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer
  • ASTM E493/E493M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
  • ASTM F565-04(2018) Standard Practice for Care and Handling of Orthopedic Implants and Instruments
  • ASTM F565-00(2003) Standard Practice for Care and Handling of Orthopedic Implants and Instruments
  • ASTM F565-04(2009) Standard Practice for Care and Handling of Orthopedic Implants and Instruments
  • ASTM E3011-22 Standard Practice for In vitro production of Clostridioides difficile Spores
  • ASTM F565-21 Standard Practice for Care and Handling of Orthopedic Implants and Instruments
  • ASTM D6551/D6551M-05(2011) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
  • ASTM F701-81(1998) Standard Practice for Care and Handling of Neurosurgical Implants and Instruments
  • ASTM E1767-11 Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials
  • ASTM D5207-98 Standard Practice for Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials
  • ASTM E2106-00(2011) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM F2895-10 Standard Practice for Digital Radiography of Cast Metallic Implants
  • ASTM D5105-05(2011) Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
  • ASTM D6091-97 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
  • ASTM E2063-12 Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
  • ASTM G222-21 Standard Practice for Estimation of UV Irradiance Received by Field-Exposed Products as a Function of Location
  • ASTM E1810-12 Standard Practice for Evaluating Effects of Contaminants on Odor and Taste of Exposed Fish
  • ASTM D4364-13 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
  • ASTM E1982-98 Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E1982-98(2002) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM E2321-03(2011) Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
  • ASTM D7740-11 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants
  • ASTM D7418-07 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM E2479-11 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves
  • ASTM D5477-11 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)

Japanese Industrial Standards Committee (JISC), UV Calibration Operating Instructions

National Metrological Verification Regulations of the People's Republic of China, UV Calibration Operating Instructions

  • JJG 755-1991 Verification Regulation of Working Standard Equipment for UV Irradiance

IN-BIS, UV Calibration Operating Instructions

EEMUA - Engineering Equipment and Materials Users Association, UV Calibration Operating Instructions

  • PUB NO 175-2013 EEMUA Code of Practice Calibration and validation of process analysers (Edition 2)
  • PUB NO 175-1995 EEMUA Code of Practice for Calibration and Checking Process Analysers (Formerly IP Code 340)

Engineering Equipment and Materials Users Association (EEMUA), UV Calibration Operating Instructions

GM North America, UV Calibration Operating Instructions

  • GM GM9609P-1991 Standard Practice for Specifying Electrical Component Appearance

Society of Automotive Engineers (SAE), UV Calibration Operating Instructions

  • SAE J2298-1996 Ultraviolet Leak Detection: Procedure for Use of Refrigerant Leak Detection Dyes for Service of Mobile Air-Conditioning Systems




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved