ZH
RU
ES

particle size in oil

particle size in oil, Total:500 items.

In the international standard classification, particle size in oil involves: Petroleum products in general, Soil quality. Pedology, Particle size analysis. Sieving, Products of the chemical industry, Production of metals, Analytical chemistry, Insulating fluids, Construction equipment, Construction materials, Air quality, Animal feeding stuffs, Optics and optical measurements, Ceramics, Lubricants, industrial oils and related products, Inks. Printing inks, Hydraulic fluids, Environmental protection, Physics. Chemistry, Powder metallurgy, Power stations in general, Plastics, Raw materials for rubber and plastics, Products of non-ferrous metals, Fuels, Rubber, Waxes, bituminous materials and other petroleum products, Road engineering, Fertilizers, Products of the textile industry, Cutting tools, Testing of metals, Edible oils and fats. Oilseeds, Metalliferous minerals, Food products in general, Fluid power systems, Internal combustion engines, Wastes, Medical equipment, Paints and varnishes, Spices and condiments. Food additives, Valves, Water quality, Vocabularies, Acoustics and acoustic measurements, Gas and steam turbines. Steam engines, Fasteners, Paint ingredients, Cereals, pulses and derived products, Test conditions and procedures in general, Optoelectronics. Laser equipment, Semi-manufactures of timber, Bearings, Welding, brazing and soldering, Occupational safety. Industrial hygiene, Extraction and processing of petroleum and natural gas, Meat, meat products and other animal produce, Tobacco, tobacco products and related equipment, Ferrous metals, Earthworks. Excavations. Foundation construction. Underground works, Iron and steel products, Structures of buildings, Natural gas, Radiation measurements, Inorganic chemicals, Rubber and plastics products.

German Institute for Standardization, particle size in oil

DIN SPEC 51455:2018 Liquide petroleum products - Determination of particle number and particle size in oils
DIN 51813:2022 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 ？m
DIN 51455:2020 Liquid petroleum products - Determination of particle number and particle size in oils
DIN 51455:2020-12 Liquid petroleum products - Determination of particle number and particle size in oils
DIN CEN/TS 17434:2020-06 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS); German version CEN/TS 17434:2020
DIN 51813:2022-08 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 µm
DIN ISO 9276-2:2018-09 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 9276-2:2018 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 9276-2:2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001);English version of DIN ISO 9276-2:2006-02
DIN CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis; German version CEN/TS 15439:2006
DIN CEN/TS 15439:2006-08 Biomass gasification - Tar and particles in product gases - Sampling and analysis; German version CEN/TS 15439:2006
DIN EN ISO 17829:2016-03 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015); German version EN ISO 17829:2015
DIN CEN/TS 17760:2022-07 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content; German version CEN/TS 17760:2022
DIN ISO 2889 Beiblatt 1:2012-10 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 1: Distribution of activity via the diameter of aerosol particles
DIN EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
DIN EN 481:1993 Workplaces atmospheres; size fraction definitions for measurement of airborne particles; German version EN 481:1993
DIN EN 12457-2:2003 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-2:2002
DIN EN 12457-1:2003 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002
DIN EN ISO 18562-2:2020-05 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017); German version EN ISO 18562-2:2020 / Note: To be replaced by DIN EN ISO 18562-2 (2022-12).
DIN EN ISO 18562-2:2022-12 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO/DIS 18562-2:2022); German and English version prEN ISO 18562-2:2022 / Note: Date of issue 2022-11-18*Intended as r...
DIN ISO 9286:2020-12 Abrasive grains and crude - Chemical analysis of silicon carbide (ISO/DIS 9286:2020); Text in German and English / Note: Date of issue 2020-11-20*Intended as replacement for DIN ISO 9286 (1998-01).
DIN ISO 7708:1996-01 Air quality - Particle size fraction definitions for health-related sampling (ISO 7708:1995)
DIN EN 12457-4:2003 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size redu
DIN EN ISO 18846:2016 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
DIN 51813:2016 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 μm
DIN ISO 9286:1998-01 Abrasive grains and crude - Chemical analysis of silicon carbide (ISO 9286:1997) / Note: To be replaced by DIN ISO 9286 (2020-12).
DIN 65668:1998-08 Aerospace series - Dilution of oils for the purpose of particles counting
DIN ISO 9286:2023-10 Abrasive grains and crude - Chemical analysis of silicon carbide (ISO 9286:2021)
DIN-Fachbericht 160:2008 Release of fibres and particles from cigarette filters
DIN EN 24015:1991 Hexagon head bolts with reduced shank (shank diameter pitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991

Association Francaise de Normalisation, particle size in oil

NF X31-516:2007 Qualité du sol - Fractionnement granulodensimétrique des matières organiques particulaires du sol dans l'eau
NF C27-232:1990 Methods for counting and sizing particles in insulating liquids.
XP X43-174*XP CEN/TS 17434:2020 Ambient air - Determination of the particle size spectra of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
XP CEN/TS 17434:2020 Air ambiant - Détermination de la distribution granulométrique de particules d'un aérosol atmosphérique à l'aide d'un spectromètre de granulométrie à mobilité électrique (MPSS)
NF X31-107:2003 Qualité du sol - Détermination de la distribution granulométrique des particules du sol - Méthode à la pipette
NF ISO 11277:2020 Qualité du sol - Détermination de la répartition granulométrique de la matière minérale des sols - Méthode par tamisage et sédimentation
NF C27-232*NF EN 60970:2007 Insulating liquides - Methods for counting and sizing particles.
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF T45-153*NF ISO 8511:2011 Rubber compounding ingredients - Carbon black - Determination of pellet size distribution
NF T60-124:1959 Petroleums and derivatives. Oil content of paraffins and petroleum waxes. Method of measuring the equivalent diameter of pores of rigid filters.
XP U42-792*XP CEN/TS 17760:2022 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content
NF X34-111*NF EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets
NF EN ISO 17829:2016 Biocombustibles solides - Détermination de la longueur et du diamètre des granulés
NF X11-632-2:2001 Representation of results of particle size analysis - Part 2 : calculation of average particle sizes/diameters and moments from particle size distributions.
XP CEN/TS 17760:2022 Engrais inorganiques - Détermination de la taille des particules des engrais à base de nitrate d'ammonium et à forte teneur en azote
NF EN 15428:2007 Amendements du sol et supports de culture - Détermination de la répartition granulométrique
NF X34-126*NF EN ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
NF EN ISO 18562-2:2020 Évaluation de la biocompatibilité des voies de gaz respiratoires dans les applications de soins de santé - Partie 2 : essais concernant les émissions de matières particulaires
XP T47-766:2013 End of life tyres (ELT) - Characterization of granulates from granulation processes - Evaluation of the odour intensity
NF X43-276*NF EN 481:1993 Workplace atmospheres. Size fraction definitions for measurement of airborne particles.
NF EN 15238:2022 Amendements du sol et supports de culture - Détermination de la quantité pour les matériaux de granulométrie supérieure à 60 mm
XP T47-765:2011 End of Life Tyres (ELT) - Characterisation of granulates from granulation processes - Guidance for a testing campaign
NF P98-818-2/IN1:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2 : particle size distribution.
NF EN 634-1:1995 Panneaux de particules liées au ciment - Exigences - Partie 1 : exigences générales.
NF T60-157:2014 Produits pétroliers - Huiles lubrifiantes - Détermination de la teneur en insolubles dans les huiles en service
NF E25-113*NF EN 24015:1992 Fasteners. Hexagon head bolts. Product grade B. Reduced shank (shank diameter = pitch diameter).
NF V32-077*NF ISO 11162:2002 Peppercorns (Piper nigrum L.) in brine - Specifications and test methods.
NF X11-670:1989 Particle size analysis in an electrolytic suspension using a resistance variation counter.

Japanese Industrial Standards Committee (JISC), particle size in oil

JIS H 7803:2005 General rules for the determination of particle size and crystallite size in metal catalysts
JIS R 1639-1:1999 Test methods of properties of fine ceramic granules Part 1: Size distribution of granules
JIS Z 8819-2:2001 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
JIS Z 8820:1990 General rules for the determination of particle size distribution by sedimentation in liquid
JIS H 7804:2005 Method for particle size determination in metal catalysts by electron microscope
JIS G 0551:1977 Methods of austenite grain size test for steel
JIS G 0552:1977 Methods of ferrite grain size test for steel
JIS K 0302:1989 Measuring method for particle-size distribution of dusts in flue gas
JIS K 0554:1995 Testing methods for concentration of fine particles in highly purified water
JIS Z 4512:1995 Measuring methods of concentration of airborne radioactive particle
JIS Z 3930:2001 Determination of emission rate of particulate fume in arc welding

Korean Agency for Technology and Standards (KATS), particle size in oil

KS I 2215-2011 Measuring method for particle-size distribution of dusts in flue gas
KS B 6331-1992(2022) The determination of particulate contamination in hydraulic fluids by the particle count method
KS A 0508-2003 GENERAL RULES FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SEDIMENTATION IN LIQUID
KS A 0509-2004 DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY THE SEDIMENTATION IN LIQUID USING THE PIPPETTE APPARATUS
KS A ISO 9276-2-2014(2019) Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS D 0305-2014(2019) Methods for determining average grain size of magnesium alloy sheets
KS B 6331-1992(2017) The determination of particulate contamination in hydraulic fluids by the particle count method
KS I ISO 7708:2010 Air quality－Particle size fraction definitions for health-related sampling
KS D 2716-2008(2018) Measurement of nanoparticle diameter－Transmission electron microscope
KS M ISO 17829:2021 Solid Biofuels — Determination of length and diameter of pellets
KS A ISO 9276-2:2003 Representation of results of particle size analysis-Part 2:Calculation of average particle sizes/diameters and moments from particle size distributions
KS A ISO 9276-2:2014 Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS M ISO 15167-2003(2018)
KS L 6524-2001(2011) TESTING METHOD FOR GRAIN SIZE OF COATED ABRASIVE MICROGRITS(P240-P1200)
KS M ISO 15167:2003 Petroleum products－Determination of particulate content of middle distillate fuels－Laboratory filtration method
KS A 0095-2007(2017) Determination of particle size distribution by the weight of sedimentation in liquid
KS D 2716-2008 Measurement of nanoparticle diameter－Transmission electron microscope
KS M ISO 4406_2001-2001(2006) Hydraulic fluid power－fluids－Method for coding the level of contamination by solid particles
KS F 2511-2007 Testing method for amount of material finer than 0.08 mm sieve in aggregate
KS M ISO 18846:2021 Solid biofuels — Determination of fines content in samples of pellets
KS M ISO 23202-2016(2021) Aluminium oxide used for the production of aluminium－Determination of particles passing a 20 micrometer aperture sieve
KS B ISO 2541:2018 Centre drills for centre holes with radius form — Type R
KS I ISO 4021:2005 Hydraulic fluid power－Particulate contamination analysis－Extraction of fluid samples from lines of an operating system
KS I 3213-2009 Testing methods for concentration of fine particles in highly purified water
KS L ISO 9285-2013(2018) Abrasive grains and crude — Chemical analysis of fused aluminium oxide
KS I ISO 28439:2013 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems
KS M 0107-1993 Testing methods for concentration of fine particles in highly purified water
KS M 2048-2001(2021) Testing method for deleterious particles in lubricating grease
KS B ISO 12167-1:2014 Plain bearings-Hydrostatic plain journal bearings with drainage grooves under steady-state conditions-Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
KS B ISO 12167-1:2015 Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oillubricated plain journal bearings with drainage grooves
KS B ISO 12167-1:2004 Plain bearings-Hydrostatic plain journal bearings with drainage grooves under steady-state conditions-Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
KS M ISO 20203:2011 Carbonaceous materials used in the production of aluminium-Calcined coke-Determination of crystallite size(Lc) of calcined petroleum coke by X-ray diffraction
KS M ISO 20203:2016 Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of crystallite size(Lc) of calcined petroleum coke by X-ray diffraction
KS B ISO 12168-1:2014 Plain bearings-Hydrostatic plain journal bearings without drainage grooves under steady-state conditions-Part 1:Calculation of oil-lubricated plain journal bearings without drainage grooves
KS B ISO 12168-1:2015 Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
KS B ISO 12168-1:2004 Plain bearings-Hydrostatic plain journal bearings without drainage grooves under steady-state conditions-Part 1:Calculation of oil-lubricated plain journal bearings without drainage grooves

PL-PKN, particle size in oil

PN C04424-1970 Pigmen?? Determination ot particie size ditlribution
PN C04061-1965 Pe?roleum produc?s Foreign par?icles in greases determina?ion by microscopical me?hod
PN C04094-1971 Petroleum products De?ermino?ion of foreign par?icles by ?he Budaroys method
PN C04424-02-1985 Pigments Determination of particie size distribution Microscopic method-simple
PN C04424-04-1985 Pigments Determination of particie size distribution Filtration on filter paper
PN C04424-06-1987 Rgments Determination of particie sizedistribution Grindometric method
PN C04424-05-1985 Pigments Determination of particie size distribution Flow-out single drop of suspension
PN M57025-1974 Holes in steel and cas? iron Diamefers of drills and reamers
PN C04090-1966 Petroleum produc?s Sulfur determination in gasoline
PN R66165-1974 Ziarno ro?lin oleistych Oznaczanie liczby ktnasotuej t?uszczu
PN C04058-1953 Petroleum products -- Determination of ash in kerosene

(U.S.) Ford Automotive Standards, particle size in oil

FORD FLTM BO 004-1-2001 PARTICLE SIZE TEST FOR RESINS
FORD E-MR004-4018-1979 WASHED& DRIED SILICA SAND - MEDIUM COARSE GRAIN

Professional Standard - Construction Industry, particle size in oil

JG/T 5089-1997 Determination of solid particulate contaminant in fluids by the automatic particle counting method
JG/T 70-1999 Microscope count method for solid particle filth in oil liquid
JG/T 5066-1996 Determination of solid particulate contaminant in fluids by the gravimetric method

American Society for Testing and Materials (ASTM), particle size in oil

ASTM D2862-97(2004) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-97 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D7634-10 Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
ASTM E2834-12(2018) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2834-12(2022) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM D2067-97 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2003) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D7684-11 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
ASTM UOP854-85 Size Distribution of Solid Phosphoric Acid Catalyst
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM E112-13 Standard Test Methods for Determining Average Grain Size
ASTM D2067-97(2020) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2008) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2008)e1 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2013) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D6786-02 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D1511-10 Standard Test Method for Carbon Black&8212;Pellet Size Distribution
ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D6786-15 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D6786-08 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D4860-08 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM E2578-07 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D6877-03 Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM D6877-03(2008) Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM D6877-13e1 Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM D5644-01(2008) Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D5158-98 Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D5158-98(2005) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D502-89(1995)e1 Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D502-89(2016) Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D5644-01 Standard Test Methods for Rubber Compounding Materials8212Determination of Particle Size Distribution of Recylced Vulcanizate Particulate Rubber
ASTM D5644-01(2008)e1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D7928-16 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D4791-05 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4791-05e1 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4791-99 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4791-10 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D3525-20 Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography
ASTM A983/A983M-06(2021) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A983/A983M-06(2016) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM D5644-01(2013) Standard Test Methods for Rubber Compounding Materialsmdash;Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D4791-19 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4791-19(2023) Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM E2627-13 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM D2977-71(1998) Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D2977-22 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D2977-14 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D5519-14 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D8090-17 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
ASTM A983/A983M-01 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A983/A983M-98 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A983/A983M-05 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A983/A983M-04 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM E1520-99(2009) Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM F1394-92(2012) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM A983/A983M-06 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM UOP144-88 Copper in Gasoline and Naphtha
ASTM D7690-11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
ASTM E2980-14 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM C123-03 Standard Test Method for Lightweight Particles in Aggregate
ASTM D185-07(2012) Standard Test Methods for Coarse Particles in Pigments
ASTM D185-07(2023) Standard Test Methods for Coarse Particles in Pigments
ASTM D185-07(2019) Standard Test Methods for Coarse Particles in Pigments
ASTM D185-07 Standard Test Methods for Coarse Particles in Pigments
ASTM E2578-07(2018) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2022) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM UOP296-82 Arsenic in Petroleum Naphthas
ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM E930-99 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM E930-99(2007) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM UOP743-73T Acid Oils in Refinery Caustic by Liberation
ASTM A983/A983M-06(2011) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A983/A983M-06(2011)e1 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM C123-04 Standard Test Method for Lightweight Particles in Aggregate
ASTM C123/C123M-11 Standard Test Method for Lightweight Particles in Aggregate
ASTM D1888-78e1 Methods of Test for Particulate and Dissolved Matter in Water
ASTM C1182-91(2007) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM C1182-09 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM F660-83(2002)e1 Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
ASTM F660-83(2007) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
ASTM F660-83(2013) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM E930-18 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM D6791-06 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D6791-02 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D8166-21a Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Condition Monitors
ASTM D8166-21 Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
ASTM D8166-22 Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors
ASTM D8166-17 Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
ASTM D7619-12a Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7321-11 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM C1282-94 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00(2006) Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-08 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1603-05a Standard Test Method for Measurement of Solids in Water
ASTM C1603-04e1 Standard Test Method for Measurement of Solids in Water
ASTM C1603-04 Standard Test Method for Measurement of Solids in Water
ASTM C123/C123M-14 Standard Test Method for Lightweight Particles in Aggregate
ASTM E930-99(2015) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
ASTM D7486-14 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis

ZA-SANS, particle size in oil

SANS 6241:2006 Particle size distribution of material of diameter smaller than 75 ?m in fine aggregate (hydrometer method)
SANS 6244:2006 Particles of diameter not exceeding 20 ?m and not exceeding 5 ?m and smaller, respectively, in fine aggregate (pipette method)

Professional Standard - Electricity, particle size in oil

DL/T 1096-2008 Limited value of particulate pollutant of transformer oils
DL/T 1096-2018 Limited value of particulate pollutant of transformer oils
DL/T 432-2018 Determination method of particle size in electric power oil
DL/T 432-2007 Determination of particulate contamination in oil

Association of German Mechanical Engineers, particle size in oil

VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer
VDI 2066 Blatt 8-1995 Measurement of particles - Dust measurement in flowing gases - Measurement of smoke number in furnaces designed for EL-type fuel oil
VDI 2463 Blatt 4-1976 Particulate matter measurement; Measurement of particulate matter in ambient air; LIB-filter method
VDI 3491 Blatt 1-1980 Particulate matter measurement; characteristics of suspended particulate matter in gases; terms and definitions
VDI 2268 Blatt 3-1988 Chemical analysis of particulate matter; determination of thallium in particulate emissions by atomic absorption spectrometry

International Organization for Standardization (ISO), particle size in oil

ISO 9276-2:2001 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 9276-2:2014 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 8511:1995 Rubber compounding ingredients - Carbon black - Determination of pellet size distribution
ISO 7708:1995 Air quality - Particle size fraction definitions for health-related sampling
ISO 5370:2023 Solid biofuels — Determination of fines content in pellets
ISO 3852:1977 Iron ores (maximum particle size 40 mm or smaller) — Determination of bulk density
ISO 5464:1980 Iron ores — Determination of bulk density for ores of maximum particle size larger than 40 mm
ISO 15167:1999 Petroleum products - Determination of particulate content of middle distillate fuels - Laboratory filtration method
ISO 3017:1973 Title missing - Legacy paper document
ISO 3017:1981 Abrasive discs; Designation, dimensions and tolerances; Selection of disc outside diameter/centre hole diameter combinations
ISO/FDIS 18562-2:2014 Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter
ISO 4021:1992 Hydraulic fluid power; particulate contamination analysis; extraction of fluid samples from lines of an operating system
ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
ISO 15086-2:2000 Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 2: Measurement of speed of sound in a fluid in a pipe
ISO 4015:2022 Fasteners — Hexagon head bolts with reduced shank (shank diameter ≈ pitch diameter) — Product grade B
ISO/DIS 10882-1 Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles
ISO/TS 17892-4:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO/TS 17892-4:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, particle size in oil

GB/T 15445.2-2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distibutions
GB/T 42208-2022 Nanotechnologies—Measurement of nanoparticle size in multiphase system—Image method of transmission electron microsopy
GB/T 5758-2001 Determination for particle size range,effective size and uniformity coefficient of ion exchange resins
GB/T 3780.17-1995 Carbon black--Indirect determination of particle size--Reflectance method
GB/T 5758-2023 Determination method of particle size, effective particle size and uniformity coefficient of ion exchange resin
GB/T 3780.17-2008 Carbon black.Part 17: Indirect determination of particle size.Reflectance method
GB/T 12010.6-2010(英文版) Plastic—Poly (vinyl alcohol) (PVAL) materials—Part 6:Determination for particle size
GB/T 5494-2008 Inspection of grain and oils.Determination of foreign matter and unsound kernels of grain and oilseeds
GB/T 5519-1988 Cereals and oilseeds method for determination of the mass of 1000 grains
GB/T 26570.1-2011 Determination of particle in gases.Light-scattering method.Part 1:Determination of particle in pipeline gases
GB/T 6645-1986 Granulated electric furnace phosphorous slag used for cement production
GB/T 203-1994 Granulated blastfurnace slag used for cement production
GB/T 203-2008 Granulated blast furnace slag used for cement production
GB/T 6645-2008 Granulated electric furnace phosphorous slag used for cement
GB/T 15689-1995 Determination of acidity of oils in oilseeds
GB/T 42845.1-2023 Microbubble Characterization of Microbubbles Part 1: Offline Evaluation of Particle Size Index
GB/T 28279.1-2012 Plain bearings.Hydrostatic plain journal bearings with drainage grooves under steady-state conditions.Part 1： Calculation of oil-lubricated plain journal bearings with drainage grooves
GB/T 11446.9-1997 Test method for particles in electronic grade water by instrument
GB/T 11446.9-2013 Test method for particles in electronic grade water by instrument
GB/T 28278.1-2012 Plain bearings.Hydrostatic plain journal bearings without drainage grooves under steady-state conditions.Part 1:Calculation of oil-lubricated plain journal bearings without drainage grooves
GB/T 27893-2011 Natural gas.Determination of particles content.Gravimetric method
GB/T 21524-2008 Particle size determination of inorganic chemical products.Sieving method

RU-GOST R, particle size in oil

GOST 26573.3-2014 Premixes. Method for determination of particle size
GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST ISO 8511-2013 Rubber compounding ingredients. Carbon black. Determination of pellet size distribution
GOST 10854-2015 Oil seeds. Methods for determination of weed, oil-producing and foreign matters
GOST 10854-1964 Oil seeds. Methods of determination of foreign matter, odour, taste and colour
GOST R 50556-1993 Hydraulic fluid power. Particulate contamination analysis. Extraction of fluid samples from lines of an operating systems
GOST 13979.4-1968 Oilcakes, oilmeals and powdered mustard seed cake. Determination of color, odour, dark impurities and small particles of oilcake
GOST R 8.896-2015 State system for ensuring the uniformity of measurements. Laser analyzers of particle size. Verification procedure
GOST 1629-2015 Granular salmon roe in transport packing. Specifications

ES-UNE, particle size in oil

UNE-CEN/TS 17434:2020 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
UNE-CEN/TS 17760:2022 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017) (Endorsed by Asociación Española de Normalización in April of 2020.)
UNE-EN 15238:2023 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm

British Standards Institution (BSI), particle size in oil

PD CEN/TS 17434:2020 Ambient air. Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
BS ISO 9276-2:2001 Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 1304:2006 Rubber compounding ingredients - Carbon black - Determination of iodine adsorption number
BS ISO 1304:2016 Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number
18/30332191 DC BS ISO 11277. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS DD CEN/TS 15439:2006 Biomass gasification — Tar and particles in product gases — Sampling and analysis
BS DD CEN/TS 15439:2007 Biomass gasification. Tar and particles in product gases Sampling and analysis
BS DD CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size and particle size distribution by screen method
DD CEN/TS 15439:2006 Biomass gasification. Tar and particles in product gases. Sampling and analysis
BS EN 12697-2:2015 Bituminous mixtures. Test methods. Determination of particle size distribution
BS EN 12697-2:2015+A1:2019 Bituminous mixtures. Test methods. Determination of particle size distribution
PD ISO/TS 23151:2021 Nanotechnologies. Particle size distribution for cellulose nanocrystals
PD CEN/TS 17760:2022 Inorganic fertilizers. Determination of particle size of ammonium nitrate fertilizers of high nitrogen content
23/30456345 DC BS ISO 11277 AMD 1. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for emissions of particulate matter
BS ISO 8486-1:1997 Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220
BS ISO 8486-1:1996 Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220
BS ISO 21018-4:2016 Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid. Use of the light extinction technique
BS ISO 13319-1:2021 Determination of particle size distribution. Electrical sensing zone method. Aperture/orifice tube method
BS ISO 23202:2006 Aluminium oxide used for the production of aluminium. Determination of particles passing a 20 micrometre aperture sieve
BS EN 12697-2:2002 Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size distribution
BS EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of particle size distribution
BS PD ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
PD ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
BS 3900-J13:2001 Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
BS EN 933-2:2020 Tests for geometrical properties of aggregates - Determination of particle size distribution. Test sieves, nominal size of apertures
22/30441401 DC BS EN ISO 18562-2. Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2. Tests for emissions of particulate matter
BS ISO 9286:2021 Tracked Changes. Abrasive grains and crude. Chemical analysis of silicon carbide
BS EN ISO 28439:2011 Workplace atmospheres. Characterization of ultrafine aerosols/nanoaerosols. Determination of the size distribution and number concentration using differential electrical mobility analysing systems
PD ISO/TR 22681:2019 Hydraulic fluid power. Impact and use of ISO 11171:2016 µm(b) and µm(c) particle size designations on particle count and filter test data
19/30390587 DC BS ISO 13319-1. Determination of particle size distribution. Electrical sensing zone method. Part 1. Aperture/orifice tube method
BS ISO 16000-34:2018 Indoor air. Strategies for the measurement of airborne particles

NATO - North Atlantic Treaty Organization, particle size in oil

STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +
AFLP-3713-2014 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE ANALYSER (ED A@ Ver 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (

CZ-CSN, particle size in oil

CSN 65 6220-1984 Oils. Determination of particulate contaminant on membrane filter
CSN 02 4609-1978 Radial internal olearanoe in radisl rolling bearings
CSN 46 1011 Cast.16-1988 Testing of cereals, legumes and oil-bearing crops. Cereal testing. Determination of large and small grained maize
CSN 46 1011-11-2003 Testing of cereals, pulses and oilseeds - Part 11: Testing of cereals - Determination of the rate of grains with reduced vitreousness of durum wheat (Triticum durum)
CSN 65 4812-1969 Determination of size and mechanical strength of granules in fertilizers
CSN 65 6081-1983 Petroleum produrts. Microscopical sizing and couting contaminating partiles
CSN 73 6152-1966 Surfacing of pavements made of aggre- gates precoated with asphalto-tar emulsion
CSN 65 6122-1962 Determination of vanadium in petroleum nd petroleum products

Danish Standards Foundation, particle size in oil

DS/EN 481:1994 Workplace atmospheres-Size fraction definitions for measurement of airborne particles
DS/ISO 15900:2020 Determination of particle size distribution – Differential electrical mobility analysis for aerosol particles
DS/CEN/TS 15439:2007 Biomass gasification - Tar and particles in product gases - Sampling and analysis
DS/EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
DS 2389:1993 Centre holes 60 degree. Determination of dimensions
DS 2390:1993 Centre holes 90 degree. Determination fo dimensions
DS/ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
DS/EN 15238/AC:2009 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
DS/EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
DS/EN ISO 10882-1:2011 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles

IN-BIS, particle size in oil

IS 6339-1971
IS 5282-1969
IS 4879-1968
IS 7512-1974
IS 8557-1977
IS 2720 Pt.3/Sec.2-1980
IS 5109-1969
IS 3415-1980
IS 13693-1993 Determination of dehusked grains in rice by double staining method
IS 11454-1985

PK-PSQCA, particle size in oil

PS 282-1963 METHOD OF TEST FOR AMOUNT OF MATERIAL FINER THAN No. 200 BS SIEVE IN AGGREGATES

RO-ASRO, particle size in oil

STAS 9546/7-1973 CHRYSOTYL ASBESTOS Determination of particle size of powdered asbestos
STAS 2293-1980 REDUCTION SLEEVES FOR CENTRES Diinensions
STAS 2293-1986 REDUCTION SLEEVES FOR CENTRES Dimensions
STAS E 11508-1989 COLD ROLLED SHEETS WITH NON-ORIENTED GRAINS FOR ELECTROTECHNICS

Professional Standard - Energy, particle size in oil

NB/SH/T 6072-2023 Filtration of Particulate Contaminants in Lubricating Oils
NB/SH/T 6017-2020 Test Method for Automatic Particle Counting and Particle Shape Classification of Oil Using a Direct Imaging Synthetic Test Apparatus

AENOR, particle size in oil

UNE 53014:2012 Plastic materials. Determination of particle size and its distribution
UNE 103102:1995 PARTICLE SIZE ANALYSIS OF A FINE SOIL BY SEDIMENTATION. DENSIMETER METHOD.
UNE-EN ISO 18846:2017 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
UNE-EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
UNE 55076:1973 FATS. DETERMINATION OF TOTAL ACIDITY FATS EXTRACTED FROM PETROLEUM ETHER IN GREAVE OIL.
UNE 7156:1960 DETERMINATION OF THICK PARTICLE PERCENTAGE IN ASPHALTIC MIXTURES.

国家市场监督管理总局、中国国家标准化管理委员会, particle size in oil

GB/T 38949-2020 Determination of pore size for porous membranes—Standard particle method
GB/T 38398-2019 Textiles—Filtration performance—Determination of most penetrating particle size
GB/T 5494-2019 Inspection of grain and oils—Determination of foreign matter and unsound kernels of grain and oilseeds

Professional Standard - Hydroelectric Power, particle size in oil

SD 313-1989 Method for measuring particle number and size distribution in oil (automatic particle counter method)

SAE - SAE International, particle size in oil

SAE ARP4285A-2018 Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure
SAE ARP598A-1969 The Determination of Particulate Contamination in Liquids by the Particle Count Method
SAE ARP598B-1986 Determination of Particulate Contamination in Liquids by the Particle Count Method
SAE R-471-2018 Reducing Particulate Emissions in Gasoline Engines
SAE ARP743A-1984 Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Particle Count Method

Society of Automotive Engineers (SAE), particle size in oil

SAE ARP4285-2008 Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure
SAE ARP598-1991 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION OF HYDRAULIC FLUIDS BY THE PARTICLE COUNT METHOD
SAE ARP598B-1991 THE DETERMINATION OF PARTICULATE CONTAMINATION IN LIQUIDS BY THE PARTICLE COUNT METHOD
SAE ARP785-1963 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION IN HYDRAULIC FLUIDS BY THE CONTROL FILTER GRAVIMETRIC PROCEDURE
SAE ARP785B-2020 Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure
SAE J946C-1976 GUIDE TO THE APPLICATION AND USE OF RADIAL LIP TYPE OIL SEALS
SAE ARP785A-2002 Aerospace - Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure
SAE RS-199-1-1943 RS199 Standard Diameters of Shock Absorbers and Jack Cylinders
SAE ARP743A-1993 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION OF AIR IN DUST CONTROLLED SPACES BY THE PARTICLE COUNT METHOD
SAE ARP743-1962 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION OF AIR IN DUST CONTROLLED SPACES BY THE PARTICLE COUNT METHOD

BE-NBN, particle size in oil

NBN 382.211-1956
NBN-EN 24015-1992 Hexagon head bolts - Product grade B - Reduced shank (Shank diameter = pitch diameter)

Universal Oil Products Company (UOP), particle size in oil

UOP 856-2007 PARTICLE SIZE DISTRIBUTION OF POWDERS BY LASER LIGHT SCATTERING

YU-JUS, particle size in oil

JUS K.F0.081-1989 Grains of diamond and cubic boroo nitri?e for bonded abrasive products. Grain sizes dlstribution and designat ion

KR-KS, particle size in oil

KS M ISO 15167-2003(2023)
KS M ISO 17829-2021 Solid Biofuels — Determination of length and diameter of pellets
KS D 2716-2023 Measurement of nanoparticle diameter — Transmission electron microscope
KS M ISO 18846-2021 Solid biofuels — Determination of fines content in samples of pellets
KS B ISO 2541-2018 Centre drills for centre holes with radius form — Type R
KS M ISO 23202-2016 Aluminium oxide used for the production of aluminium－Determination of particles passing a 20 micrometer aperture sieve
KS F 2511-2022 Particle amount in aggregate Finer than 0.08 mm sieve Test method
KS A 0095-2007(2022) Determination of particle size distribution by the weight of sedimentation in liquid

VN-TCVN, particle size in oil

TCVN 6753-2000 Air quality.Particle size fraction definitions for health-related sampling
TCVN 4846-1989 Determination of moisture content (on milled grains and on whole grains)
TCVN 4777-1989 Ores and concentrates of non-ferrous metals.Method of sieve and sedimentary analysis for determination of particle size
TCVN 3121-1-2003 Mortar for masonry.Test methods Part 1: Determination of maximum particle size of aggregate

CEN - European Committee for Standardization, particle size in oil

PD CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis

European Committee for Standardization (CEN), particle size in oil

CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis
FprCEN/TS 17760-2021 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content
prEN 933-1-1992 Tests for geometrical properties of aggregates; part 1: determination of particle size distribution; granulometric analysis (sieving method)
EN ISO 5370:2023 Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)
EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
prEN 481-1992 Workplace atmospheres; size fraction definitions for measurement of airbone particles
EN 12457-4:2002 Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
EN 15238:2022 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
prEN 725-5-1992 Advanced technical ceramics; methods of test for ceramic powders; part 5: determination of the particle size distributuion
prEN 15238-2021 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
EN 481:1993 Workplace atmospheres; size fraction definitions for measurement of airborne particles
prEN ISO 10882-1 rev Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
CEN EN 12662-2008 Liquid petroleum products — Determination of contamination in middle distillates

Lithuanian Standards Office , particle size in oil

LST EN 16127-2012 Solid biofuels - Determination of length and diameter of pellets
LST EN 15238-2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
LST EN 15238-2007/AC-2009 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm

GOSTR, particle size in oil

GOST 34089-2017 Solid biofuel. Determination of length and diameter of pellets

IT-UNI, particle size in oil

UNI 4385-1959

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, particle size in oil

GB/T 3780.17-2017 Carbon black—Part 17: Indirect determination of particle size—Reflectance method

NO-SN, particle size in oil

NS 1919-1974 Centre drills with radial chamfer

未注明发布机构, particle size in oil

SAE ARP785A-1996 Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure
BS ISO 23202:2006(2007) Aluminium oxide used for the production of aluminium — Determination of particles passing a 20 micrometre aperture sieve
DIN EN ISO 1524:2002 Coating materials and printing inks Determination of grinding fineness (graininess)

Professional Standard - Agriculture, particle size in oil

GB 5519-1988 Determination method of thousand-grain weight of grain and oilseeds
LS/T 6141-2023 Determination of Grain and Oil Inspection Rice Soaking Cracks
NY/T 1526-2007 The identification of palmoil in the plant oil

ES-AENOR, particle size in oil

VE-FONDONORMA, particle size in oil

NORVEN 76-23-1965

Professional Standard - Building Materials, particle size in oil

JC/T 417-1991 Granulated ferrochromium slag intended to be used in cement
JC/T 418-1991 Granulated blast furnace titanium slag intended to be used in cement
JC/T 454-1992 Granulated calcium enriched liquid slag intended to be used in cement
JC/T 418-2009 Granulated blast furnace titanium slag used for cement

American Society of Mechanical Engineers (ASME), particle size in oil

ASME PTC 38-1980(R1985) Determining the Concentration of Particulate Matter in A Gas Stream
ASME PTC 38-1980 Determining the Concentration of Particulate Matter in a Gas Stream

国家建筑材料工业局, particle size in oil

JC 417-1991 Granulated ferrochrome slag for use in cement
JC 454-1992 Granulated calcium-enhancing liquid slag used in cement
JC 418-1991 Granulated blast furnace titanium slag for use in cement

IETF - Internet Engineering Task Force, particle size in oil

RFC 7075-2013 Realm-Based Redirection In Diameter
RFC 5520-2009 Preserving Topology Confidentiality in Inter-Domain Path Computation Using a Path-Key-Based Mechanism

中国石油化工总公司, particle size in oil

SH/T 0057-1991 Determination of inorganic particle content in marine residual fuel oil (centrifugal separation method)

FI-SFS, particle size in oil

SFS 2420-1967

Malaysia Standards, particle size in oil

MS 81 Pt.12-2001 Method of sampling and test for spices and condiments:Part 12:Determination of particle size

Indonesia Standards, particle size in oil

SNI ASTM C123:2012 Test methods for lightweight particles in aggregate
SNI 03-6444-2000 Test method for half cell potential uncoated dielectric material reinforcing steels in concrete

HU-MSZT, particle size in oil

MSZ 374/5-1969

International Truck and Engine Corporation (ITEC), particle size in oil

INTERN CEMS BT-44-2009 Phosphorus In Oil

AR-IRAM, particle size in oil

Professional Standard - Machinery, particle size in oil

JB/T 9591.3-2015 Gas turbine.Cleanliness verifing for oil system.Measuring particulate contaminant in oil by microscopic counting method
JB/T 9591.3-1999 Cleanliness test for oil system of gas turbine measuring solid particle contaminant in oil liquid by microscopic counting method

North Atlantic Treaty Organization Standards Agency, particle size in oil

STANAG 3713-2008 DETERMINATION OF PARTICULATE MATTER IN AEROSPACE HYDRAULIC FLUIDS USING A PARTICLE SIZE ANALYSER

IX-SA, particle size in oil

AS 1141.19:1980

API - American Petroleum Institute, particle size in oil

API 4348-1982 ELEMENTS OF AIRBORNE PARTICLE BEHAVIOR IN THE UNITED STATES

Institute of Environmental Sciences and Technology, particle size in oil

IEST G-CC1002-1999 Determination of the Concentration of Airborne Ultrafine Particles

工业和信息化部, particle size in oil

SJ/T 11638-2016 Test methods for particles in electronic chemicals

Standard Association of Australia （SAA）, particle size in oil

AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method

AT-ON, particle size in oil

ONORM L 1061-2-2002 Physical analysis of soils - Determination of particle size distribution in mineral soils - Part 2: Feinboden
ONORM L 1061-1-2002 Physical analysis of soils - Determination of particle size distribution in mineral soils-Part 1: Coarse soil

Group Standards of the People's Republic of China, particle size in oil

T/CAS 542-2021 Technical requirements and evaluation methods of air cleaner removing performance for small particles pollutant
T/CNIA 0015-2019 Determination of Silica Dust Content in Granular Silicon Production Tail Gas

Professional Standard - Petrochemical Industry, particle size in oil

SH/T 1718-2015 Oil-extended synthetic rubber.Determination of oil content
SH/T 1718-2002 Oil-extended synthetic rubber - Determination of oil content

Professional Standard - Petroleum, particle size in oil

SY/T 0601-1997 Determination of emulsified oil and oil-soluble in water
SY/T 0601-2009 Determination of emulsified oil and soluble oil in water

CL-INN, particle size in oil

INDITECNOR 30-37ch-1954

AASHTO - American Association of State Highway and Transportation Officials, particle size in oil

T 113-2018 Standard Method of Test for Lightweight Particles in Aggregate

US-FCR, particle size in oil

FCR COE P-1 FINAL REPORT-1992 PARTICLE SIZE DISTRIBUTIONS OF BED SEDIMENTS ALONG THE THALWEG OF THE MISSISSIPPI RIVER, CAIRO, ILLINOIS, TO HEAD OF PASSES

GM Europe, particle size in oil

GME L-9A-18-2000 Determination of Radial Elasticity of Universal Joints and Intermediate Spindels

Professional Standard - Aviation, particle size in oil

HB 1930-1975 Calibration plug gauge for taper thread pitch diameter thread ring gauge

International Telecommunication Union (ITU), particle size in oil

ITU-R QUESTION 276/4-2009 Availability of digital paths in mobile-satellite services

GM North America, particle size in oil

GM GM9097P-1988 Determination of Manganese in Gasoline

United States Navy, particle size in oil

NAVY QPL-25896-19 NOTICE 1-2003 ADAPTER, PRESSURE FUEL SERVICING, NOMINAL 2.5 INCH DIAMETER
NAVY QPL-25896-19-1996 ADAPTER, PRESSURE FUEL SERVICING, NOMINAL 2.5 INCH DIAMETER

TR-TSE, particle size in oil

TS 2812-1977 Margarine (Vegetable Origine)
TS 3528-1980 DETERMINATION OF THE PROPORTION OF LIGHTWEIGHT PARTICLES IN AGGREGATES FOR CONCRETE

ESDU - Engineering Sciences Data Unit, particle size in oil

ESDU 75033-1975 Elastic stress concentration factors. Double radius fillets in shouldered shafts in torsion.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., particle size in oil

ASHRAE 4328-2000 Method for Measuring Ice Slurry Particle Agglormeration in Storage Tanks
ASHRAE 90444-2009 Particulate and Gaseous Contamination in Datacom Environments