ZH
RU
ES

oil particle size

oil particle size, Total:454 items.

In the international standard classification, oil particle size involves: Petroleum products in general, Particle size analysis. Sieving, Animal feeding stuffs, Ceramics, Air quality, Soil quality. Pedology, Products of the chemical industry, Production of metals, Insulating fluids, Plastics, Raw materials for rubber and plastics, Analytical chemistry, Environmental protection, Products of non-ferrous metals, Fuels, Rubber, Road engineering, Fertilizers, Products of the textile industry, Cutting tools, Testing of metals, Edible oils and fats. Oilseeds, Construction equipment, Metalliferous minerals, Construction materials, Food products in general, Hydraulic fluids, Wastes, Physics. Chemistry, Paints and varnishes, Spices and condiments. Food additives, Valves, Powder metallurgy, Waxes, bituminous materials and other petroleum products, Lubricants, industrial oils and related products, Cereals, pulses and derived products, Test conditions and procedures in general, Optoelectronics. Laser equipment, Semi-manufactures of timber, Inks. Printing inks, Bearings, Earthworks. Excavations. Foundation construction. Underground works, General methods of tests and analysis for food products, Mechanical testing, Materials for aerospace construction, Aerospace fluid systems and components, Fluid power systems, Internal combustion engines for road vehicles, Special purpose vehicles, Pipeline components and pipelines, Equipment for petroleum and natural gas industries, Shipbuilding and marine structures in general, Kitchen equipment, Medical equipment, Internal combustion engines, Protection against dangerous goods, Fluid storage devices, Sports equipment and facilities, Aids for disabled or handicapped persons, Acoustics and acoustic measurements, Water quality.

German Institute for Standardization, oil particle size

DIN SPEC 51455:2018 Liquide petroleum products - Determination of particle number and particle size in oils
DIN 51813:2022 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 ？m
DIN CEN/TS 17434:2020-06 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS); German version CEN/TS 17434:2020
DIN 51455:2020 Liquid petroleum products - Determination of particle number and particle size in oils
DIN 51455:2020-12 Liquid petroleum products - Determination of particle number and particle size in oils
DIN ISO 9276-2:2018-09 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 9276-2:2018 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 9276-2:2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001);English version of DIN ISO 9276-2:2006-02
DIN EN ISO 17829:2016-03 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015); German version EN ISO 17829:2015
DIN CEN/TS 17760:2022-07 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content; German version CEN/TS 17760:2022
DIN EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
DIN EN 12457-2:2003 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-2:2002
DIN EN 12457-1:2003 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002
DIN ISO 9286:2020-12 Abrasive grains and crude - Chemical analysis of silicon carbide (ISO/DIS 9286:2020); Text in German and English / Note: Date of issue 2020-11-20*Intended as replacement for DIN ISO 9286 (1998-01).
DIN ISO 7708:1996-01 Air quality - Particle size fraction definitions for health-related sampling (ISO 7708:1995)
DIN EN 12457-4:2003 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size redu
DIN 51813:2016 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 μm
DIN ISO 9286:1998-01 Abrasive grains and crude - Chemical analysis of silicon carbide (ISO 9286:1997) / Note: To be replaced by DIN ISO 9286 (2020-12).
DIN 65668:1998-08 Aerospace series - Dilution of oils for the purpose of particles counting
DIN ISO 9286:2023-10 Abrasive grains and crude - Chemical analysis of silicon carbide (ISO 9286:2021)
DIN 51813:2022-08 Testing of lubricants - Determination of the content of foreign solid matters in lubricating greases - Particle sizes above 25 µm
DIN EN 12457-3:2021 Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm
DIN EN 12457-3:2003 Characterization of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 mm (
DIN EN 933-2:2020 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
DIN EN 933-2:2020-09 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures; German version EN 933-2:2020
DIN EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements; German version EN 14530:2004
DIN EN 14530:2004-06 Workplace atmospheres - Determination of diesel particulate matter - General requirements; German version EN 14530:2004
DIN 65668:1998 Aerospace series - Dilution of oils for the purpose of particles counting
DIN CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis; German version CEN/TS 15439:2006
DIN CEN/TS 15439:2006-08 Biomass gasification - Tar and particles in product gases - Sampling and analysis; German version CEN/TS 15439:2006
DIN EN ISO 18562-2:2020-05 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017); German version EN ISO 18562-2:2020 / Note: To be replaced by DIN EN ISO 18562-2 (2022-12).
DIN EN ISO 18562-2:2022-12 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO/DIS 18562-2:2022); German and English version prEN ISO 18562-2:2022 / Note: Date of issue 2022-11-18*Intended as r...
DIN EN 12457-3:2021-03 Characterization of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content with particle size below 4 ...
DIN ISO 2889 Beiblatt 1:2012-10 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 1: Distribution of activity via the diameter of aerosol particles
DIN CEN/TS 16969:2016-11*DIN SPEC 91034:2016-11 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance; German version CEN/TS 16969:2016
DIN EN ISO 17827-1:2016-10 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016); German version EN ISO 17827-1:2016 / Note: To be replaced by DI...
DIN EN ISO 17827-2:2016-10 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016); German version EN ISO 17827-2:2016 / Note: To be replaced by DIN E...

PL-PKN, oil particle size

PN C04424-1970 Pigmen?? Determination ot particie size ditlribution
PN C04424-02-1985 Pigments Determination of particie size distribution Microscopic method-simple
PN C04424-04-1985 Pigments Determination of particie size distribution Filtration on filter paper
PN C04424-06-1987 Rgments Determination of particie sizedistribution Grindometric method
PN C04424-05-1985 Pigments Determination of particie size distribution Flow-out single drop of suspension
PN C04061-1965 Pe?roleum produc?s Foreign par?icles in greases determina?ion by microscopical me?hod
PN C04094-1971 Petroleum products De?ermino?ion of foreign par?icles by ?he Budaroys method
PN-EN 933-2-2021-01 E Tests for geometrical properties of aggregates -- Part 2: Determination of particle size distribution -- Test sieves, nominal size of apertures

(U.S.) Ford Automotive Standards, oil particle size

FORD FLTM BO 004-1-2001 PARTICLE SIZE TEST FOR RESINS

American Society for Testing and Materials (ASTM), oil particle size

ASTM D2862-97(2004) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D2862-97 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM E1037-15 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM UOP854-85 Size Distribution of Solid Phosphoric Acid Catalyst
ASTM E112-13 Standard Test Methods for Determining Average Grain Size
ASTM D1511-10 Standard Test Method for Carbon Black&8212;Pellet Size Distribution
ASTM E2578-07 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D5644-01(2008) Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D5158-98 Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D5158-98(2005) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D502-89(1995)e1 Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D502-89(2016) Standard Test Method for Particle Size of Soaps and Other Detergents
ASTM D7634-10 Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy
ASTM D5644-01 Standard Test Methods for Rubber Compounding Materials8212Determination of Particle Size Distribution of Recylced Vulcanizate Particulate Rubber
ASTM D5644-01(2008)e1 Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM D7928-16 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM E2834-12(2018) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM E2834-12(2022) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D5644-01(2013) Standard Test Methods for Rubber Compounding Materialsmdash;Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
ASTM E2980-20 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM D2977-71(1998) Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D2977-22 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D2977-14 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D5519-14 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM E2834-12 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA)
ASTM D8090-17 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
ASTM D6913-04e2 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM F1394-92(2012) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM E2980-14 Standard Test Methods for Estimating Average Particle Size of Powders Using Air Permeability
ASTM E2578-07(2018) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2022) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM D2067-97 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2003) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D6786-02 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D7684-11 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants
ASTM C1182-91(2007) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM C1182-09 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM D6786-07 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D6791-06 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D6791-02 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D6786-15 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D6786-08 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM C1282-94 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-00(2006) Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM C1282-08 Standard Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
ASTM D2067-97(2020) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2008) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2008)e1 Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM D2067-97(2013) Standard Test Method for Coarse Particles in Printing Ink Dispersions
ASTM C690-09(2014) Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique
ASTM D6791-11 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM E2490-08 Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM E2490-09(2021) Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM D6175-03(2019) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D6175-03(2008) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM C721-20 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
ASTM D6877-13 Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM D6791-22 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM D6877-13(2018) Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM B859-03 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
ASTM B859-03(2008)e1 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
ASTM B859-13 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis
ASTM D5158-98(2013) Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM D6877-03 Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM D6877-03(2008) Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM D6877-13e1 Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace
ASTM D7596-23 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D4860-08 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM D6791-11(2017)e1 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
ASTM F50-12(2015) Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
ASTM D6104-97(2011) Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
ASTM D3525-20 Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography
ASTM D7321-18 Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM D7321-18a Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM C721-15 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
ASTM D6104-97(2017)e1 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
ASTM D610-08(2019) Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
ASTM D7596-14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM D7596-10 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
ASTM E2627-13 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM D7321-08 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM A983/A983M-06(2021) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A983/A983M-06(2016) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM D7321-16 Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM D7321-16a Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM D7321-21 Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM D5187-10 Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction
ASTM D7096-10 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
ASTM F1632-03 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM F1632-99 Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM D7321-11e1 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
ASTM A983/A983M-01 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A983/A983M-98 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A983/A983M-05 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A983/A983M-04 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

Korean Agency for Technology and Standards (KATS), oil particle size

KS A ISO 9276-2-2014(2019) Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS I 2215-2011 Measuring method for particle-size distribution of dusts in flue gas
KS D 0305-2014(2019) Methods for determining average grain size of magnesium alloy sheets
KS B 6331-1992(2017) The determination of particulate contamination in hydraulic fluids by the particle count method
KS I ISO 7708:2010 Air quality－Particle size fraction definitions for health-related sampling
KS D 2716-2008(2018) Measurement of nanoparticle diameter－Transmission electron microscope
KS M ISO 17829:2021 Solid Biofuels — Determination of length and diameter of pellets
KS A ISO 9276-2:2003 Representation of results of particle size analysis-Part 2:Calculation of average particle sizes/diameters and moments from particle size distributions
KS A ISO 9276-2:2014 Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS B 6331-1992(2022) The determination of particulate contamination in hydraulic fluids by the particle count method
KS A 0508-2003 GENERAL RULES FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SEDIMENTATION IN LIQUID
KS L 6524-2001(2011) TESTING METHOD FOR GRAIN SIZE OF COATED ABRASIVE MICROGRITS(P240-P1200)
KS D 2716-2008 Measurement of nanoparticle diameter－Transmission electron microscope
KS M ISO 4406_2001-2001(2006) Hydraulic fluid power－fluids－Method for coding the level of contamination by solid particles
KS A 0509-2004 DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY THE SEDIMENTATION IN LIQUID USING THE PIPPETTE APPARATUS
KS M ISO 23202-2016(2021) Aluminium oxide used for the production of aluminium－Determination of particles passing a 20 micrometer aperture sieve
KS L ISO 9285-2013(2018) Abrasive grains and crude — Chemical analysis of fused aluminium oxide
KS I ISO 28439:2013 Workplace atmospheres ― Characterization of ultrafine aerosols/ nanoaerosols ― Determination of the size distribution and number concentration using differential electrical mobility analysing systems
KS B ISO 12167-1:2014 Plain bearings-Hydrostatic plain journal bearings with drainage grooves under steady-state conditions-Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
KS B ISO 12167-1:2015 Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oillubricated plain journal bearings with drainage grooves
KS B ISO 12167-1:2004 Plain bearings-Hydrostatic plain journal bearings with drainage grooves under steady-state conditions-Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
KS B ISO 12168-1:2014 Plain bearings-Hydrostatic plain journal bearings without drainage grooves under steady-state conditions-Part 1:Calculation of oil-lubricated plain journal bearings without drainage grooves
KS B ISO 12168-1:2015 Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
KS B ISO 12168-1:2004 Plain bearings-Hydrostatic plain journal bearings without drainage grooves under steady-state conditions-Part 1:Calculation of oil-lubricated plain journal bearings without drainage grooves
KS B ISO 12167-2:2004 Plain bearings-Hydrostatic plain journal bearings with drainage grooves under steady-state conditions-Part 2:Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
KS B ISO 12167-2:2014 Plain bearings-Hydrostatic plain journal bearings with drainage grooves under steady-state conditions-Part 2:Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
KS B ISO 12167-2:2015 Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
KS B ISO 12168-2:2004 Plain bearings-Hydrostatic plain journal bearings without drainage grooves under steady-state conditions-Part 2:Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves
KS B ISO 12168-2:2014 Plain bearings-Hydrostatic plain journal bearings without drainage grooves under steady-state conditions-Part 2:Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves
KS B ISO 12168-2:2015 Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves
KS I ISO 4407:2012 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope
KS H ISO 16931:2013 Animal and vegetable fats and oils ― Determination of polymerized triglycerides by high-performance size-exclusion chromatography (HPSEC)
KS H ISO 16931:2003 Animal and vegetable fats and oils-Determination of polymerized triglyceridescontent by high-performance size-exclusion chromatography(HPSEC)
KS M ISO 15167-2003(2018)
KS R ISO 19438-2015(2020) Diesel fuel and petrol filters for internal combustion engines－Filtration efficiency using particle counting and contaminant retention capacity
KS L ISO 24235:2008 Fine ceramics (advanced ceramics, advanced technical ceramics)-Determination of particle size distribution of ceramic powders by laser diffraction method
KS M ISO 15167:2003 Petroleum products－Determination of particulate content of middle distillate fuels－Laboratory filtration method
KS B 2104-2013 Method for determination of radial crushing strength constant of metal powder sintered bearing, oil impregnated
KS P ISO 17190-3:2011 Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 3：Determination of particle size distribution by sieve fractionation

International Organization for Standardization (ISO), oil particle size

ISO 9276-2:2001 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 9276-2:2014 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 8511:1995 Rubber compounding ingredients - Carbon black - Determination of pellet size distribution
ISO 7708:1995 Air quality - Particle size fraction definitions for health-related sampling
ISO 3852:1977 Iron ores (maximum particle size 40 mm or smaller) — Determination of bulk density
ISO 5464:1980 Iron ores — Determination of bulk density for ores of maximum particle size larger than 40 mm
ISO/TS 17892-4:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO/TS 17892-4:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution
ISO 14703:2000 Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders
ISO 14703:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders
ISO 24235:2007 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of particle size distribution of ceramic powders by laser diffraction method
ISO 16931:2009 Animal and vegetable fats and oils - Determination of polymerized triacylglycerols by high-performance size-exclusion chromatography (HPSEC)
ISO 28523:2009 Ships and marine technology - Lubricating and hydraulic oil systems - Guidance for sampling to determine cleanliness and particle contamination
ISO/FDIS 12167-1 Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
ISO/TR 13353:1994 Diesel fuel and petrol filters for internal combustion engines - Initial efficiency by particle counting, retention capacity and gravimetric efficiency
ISO/FDIS 18562-2:2014 Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter
ISO 15167:1999 Petroleum products - Determination of particulate content of middle distillate fuels - Laboratory filtration method
ISO 15086-2:2000 Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 2: Measurement of speed of sound in a fluid in a pipe

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, oil particle size

GB/T 15445.2-2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distibutions
GB/T 5758-2001 Determination for particle size range,effective size and uniformity coefficient of ion exchange resins
GB/T 3780.17-1995 Carbon black--Indirect determination of particle size--Reflectance method
GB/T 5758-2023 Determination method of particle size, effective particle size and uniformity coefficient of ion exchange resin
GB/T 3780.17-2008 Carbon black.Part 17: Indirect determination of particle size.Reflectance method
GB/T 12010.6-2010(英文版) Plastic—Poly (vinyl alcohol) (PVAL) materials—Part 6:Determination for particle size
GB/T 5494-2008 Inspection of grain and oils.Determination of foreign matter and unsound kernels of grain and oilseeds
GB/T 5519-1988 Cereals and oilseeds method for determination of the mass of 1000 grains
GB/T 42845.1-2023 Microbubble Characterization of Microbubbles Part 1: Offline Evaluation of Particle Size Index
GB/T 28279.1-2012 Plain bearings.Hydrostatic plain journal bearings with drainage grooves under steady-state conditions.Part 1： Calculation of oil-lubricated plain journal bearings with drainage grooves
GB/T 28278.1-2012 Plain bearings.Hydrostatic plain journal bearings without drainage grooves under steady-state conditions.Part 1:Calculation of oil-lubricated plain journal bearings without drainage grooves
GB/T 28279.2-2012 Plain bearings.Hydrostatic plain journal bearings with drainage grooves under steady-state conditions.Part 2：Characteristic values for calculation of oil-lubricated plain journal bearings with drainage grooves
GB/T 28278.2-2012 Plain bearings.Hydrostatic plain journal bearings without drainage grooves under steady-state conditions.Part 2：Characteristic values for calculation of oil-lubricated plain journal bearings without drainage grooves

RU-GOST R, oil particle size

GOST 26573.3-2014 Premixes. Method for determination of particle size
GOST 33399-2015 Testing of chemicals of environmental hazard. Determination of the particle size distribution/determination of the fibre length and diameter distribution. Method A: Particle size distribution (effective hydrodynamic radius). Method B: Fibre length and dia
GOST ISO 8511-2013 Rubber compounding ingredients. Carbon black. Determination of pellet size distribution
GOST 10854-2015 Oil seeds. Methods for determination of weed, oil-producing and foreign matters
GOST 10854-1964 Oil seeds. Methods of determination of foreign matter, odour, taste and colour
GOST 13979.4-1968 Oilcakes, oilmeals and powdered mustard seed cake. Determination of color, odour, dark impurities and small particles of oilcake
GOST R 8.896-2015 State system for ensuring the uniformity of measurements. Laser analyzers of particle size. Verification procedure
GOST 32727-2014 Automobile roads of general use. Natural and crushed sand. Determination of particle size distribution and size of the module
GOST R 56685-2015 Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications
GOST R ISO 8723-2015 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of oil content. Method by solvent extraction
GOST 32989.1-2014 Solid biofuels. Determination of particle size distribution. Part 1. Oscillating screen method using sieve apertures of 1 mm and above
GOST 32989.2-2014 Solid biofuels. Determination of particle size distribution. Part 2. Vibrating screen method using sieve apertures of 3,15 mm and below

Association Francaise de Normalisation, oil particle size

XP X43-174*XP CEN/TS 17434:2020 Ambient air - Determination of the particle size spectra of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
NF X31-516:2007 Qualité du sol - Fractionnement granulodensimétrique des matières organiques particulaires du sol dans l'eau
XP CEN/TS 17434:2020 Air ambiant - Détermination de la distribution granulométrique de particules d'un aérosol atmosphérique à l'aide d'un spectromètre de granulométrie à mobilité électrique (MPSS)
NF X31-107:2003 Qualité du sol - Détermination de la distribution granulométrique des particules du sol - Méthode à la pipette
NF C27-232*NF EN 60970:2007 Insulating liquides - Methods for counting and sizing particles.
NF T45-153*NF ISO 8511:2011 Rubber compounding ingredients - Carbon black - Determination of pellet size distribution
NF C27-232:1990 Methods for counting and sizing particles in insulating liquids.
XP U42-792*XP CEN/TS 17760:2022 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content
NF X34-111*NF EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets
NF EN ISO 17829:2016 Biocombustibles solides - Détermination de la longueur et du diamètre des granulés
NF X11-632-2:2001 Representation of results of particle size analysis - Part 2 : calculation of average particle sizes/diameters and moments from particle size distributions.
XP CEN/TS 17760:2022 Engrais inorganiques - Détermination de la taille des particules des engrais à base de nitrate d'ammonium et à forte teneur en azote
NF EN 15428:2007 Amendements du sol et supports de culture - Détermination de la répartition granulométrique
NF EN 15238:2022 Amendements du sol et supports de culture - Détermination de la quantité pour les matériaux de granulométrie supérieure à 60 mm
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF P98-818-2/IN1:2007 Bituminous mixtures - Test method for hot mix asphalt - Part 2 : particle size distribution.
NF ISO 11277:2020 Qualité du sol - Détermination de la répartition granulométrique de la matière minérale des sols - Méthode par tamisage et sédimentation
XP CEN/TS 16969:2016 Peintures et vernis - Produits de peinture et systèmes de revêtement pour bois en extérieur - Evaluation des performances du colmatage des bois de bout
NF T60-124:1959 Petroleums and derivatives. Oil content of paraffins and petroleum waxes. Method of measuring the equivalent diameter of pores of rigid filters.
NF B41-204:2002 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3 : determination of grain size and size distribution (characterized by the linear intercept method).
NF X43-289*NF EN 14530:2004 Workplaces atmospheres - Determination of diesel particulate matter - General requirements
NF EN 14530:2004 Air des lieux de travail - Dosage des matières particulaires émises par les moteurs diesel - Exigences générales
NF EN ISO 21083-1:2018 Méthode d'essai pour mesurer l'efficacité des médias de filtration d'air par rapport aux nanomatériaux sphériques - Partie 1 : spectre granulométrique de 20 nm à 500 nm
NF T70-335:1995 Energetic materials for defense. Physical-chemical analysis and properties. Determination of average diameter. Method with the sub-sieve-sizer Fisher.
NF EN ISO 18562-2:2020 Évaluation de la biocompatibilité des voies de gaz respiratoires dans les applications de soins de santé - Partie 2 : essais concernant les émissions de matières particulaires
NF M88-091:1986 Road tankers foe liquid petroleum products. Source (bottom) loading. Coupling devices ND 80.
NF EN 13443-2+A1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Filtres mécaniques - Partie 2 : particules de taille 1 µm et 80 µm - Exigences de performances, de sécurité et essais
NF EN 13443-2/IN1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Filtres mécaniques - Partie 2 : particules de taille 1 µm et 80 µm - Exigences de performances, de sécurité et essais
NF X34-124-1*NF EN ISO 17827-1:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1 : oscillating screen method using sieves with apertures of 3,15 mm and above
NF X34-124-2*NF EN ISO 17827-2:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2 : vibrating screen method using sieves with aperture of 3,15 mm and below

ES-UNE, oil particle size

UNE-CEN/TS 17434:2020 Ambient air - Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS) (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
UNE-CEN/TS 17760:2022 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN 15238:2023 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
UNE-EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
UNE-EN 933-2:2022 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
UNE-EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2017) (Endorsed by Asociación Española de Normalización in April of 2020.)
UNE-EN 12457-4:2003 ERRATUM:2006 Characterization of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction).
UNE-CEN/TS 16969:2016 Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance (Endorsed by AENOR in October of 2016.)
UNE-EN ISO 17827-1:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)

British Standards Institution (BSI), oil particle size

PD CEN/TS 17434:2020 Ambient air. Determination of the particle number size distribution of atmospheric aerosol using a Mobility Particle Size Spectrometer (MPSS)
BS ISO 9276-2:2001 Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 1304:2006 Rubber compounding ingredients - Carbon black - Determination of iodine adsorption number
BS ISO 1304:2016 Rubber compounding ingredients. Carbon black. Determination of iodine adsorption number
BS DD CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size and particle size distribution by screen method
BS EN 12697-2:2015 Bituminous mixtures. Test methods. Determination of particle size distribution
BS EN 12697-2:2015+A1:2019 Bituminous mixtures. Test methods. Determination of particle size distribution
PD ISO/TS 23151:2021 Nanotechnologies. Particle size distribution for cellulose nanocrystals
PD CEN/TS 17760:2022 Inorganic fertilizers. Determination of particle size of ammonium nitrate fertilizers of high nitrogen content
BS ISO 8486-1:1997 Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220
BS ISO 8486-1:1996 Bond abrasives. Determination and designation of grain size distribution. Macrogrits F4 to F220
BS ISO 13319-1:2021 Determination of particle size distribution. Electrical sensing zone method. Aperture/orifice tube method
BS ISO 23202:2006 Aluminium oxide used for the production of aluminium. Determination of particles passing a 20 micrometre aperture sieve
BS EN 12697-2:2002 Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size distribution
BS EN 725-5:2007 Advanced technical ceramics - Methods of test for ceramic powders - Determination of particle size distribution
BS 3900-J13:2001 Methods of test for paints - Testing of coating powders - Particle size analysis by laser diffraction
BS EN 933-2:2020 Tests for geometrical properties of aggregates - Determination of particle size distribution. Test sieves, nominal size of apertures
BS ISO 9286:2021 Tracked Changes. Abrasive grains and crude. Chemical analysis of silicon carbide
BS EN ISO 28439:2011 Workplace atmospheres. Characterization of ultrafine aerosols/nanoaerosols. Determination of the size distribution and number concentration using differential electrical mobility analysing systems
PD ISO/TR 22681:2019 Hydraulic fluid power. Impact and use of ISO 11171:2016 µm(b) and µm(c) particle size designations on particle count and filter test data
19/30390587 DC BS ISO 13319-1. Determination of particle size distribution. Electrical sensing zone method. Part 1. Aperture/orifice tube method
20/30400951 DC BS ISO 9286. Abrasive grains and crude. Chemical analysis of silicon carbide
18/30332191 DC BS ISO 11277. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS EN 14530:2004(2009) Workplace atmospheres - Determination of diesel particulate matter - General requirements
BS EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
21/30436582 DC BS EN 15238. Soil improvers and growing media. Determination of quantity for materials with particle size greater than 60 mm
BS DD CEN/TS 15149-1:2006 Solid biofuels - Methods for the determination of particle size distribution - Oscillating screen method using sieve apertures of 3, 15 mm and above
23/30456345 DC BS ISO 11277 AMD 1. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS EN ISO 18562-2:2020 Biocompatibility evaluation of breathing gas pathways in healthcare applications. Tests for emissions of particulate matter
BS EN 15238:2022 Tracked Changes. Soil improvers and growing media. Determination of quantity for materials with particle size greater than 60 mm
BS DD CEN/TS 15439:2006 Biomass gasification — Tar and particles in product gases — Sampling and analysis
BS DD CEN/TS 15439:2007 Biomass gasification. Tar and particles in product gases Sampling and analysis
BS EN 1430:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions
DD CEN/TS 15439:2006 Biomass gasification. Tar and particles in product gases. Sampling and analysis
BS EN 15149-1:2010 Solid biofuels. Determination of particle size distribution. Oscillating screen method using sieve apertures of 1 mm and above
BS EN 15149-2:2010 Solid biofuels. Determination of particle size distribution. Vibrating screen method using sieve apertures of 3,15 mm and below
19/30377681 DC BS EN 933-2. Tests for geometrical properties of aggregates. Part 2. Determination of particle size distribution. Test sieves, nominal size of apertures
BS ISO 14703:2009 Fine ceramics (advanced ceramics, advanced technical ceramics). Sample preparation for the determination of particle size distribution of ceramic powders
BS ISO 14703:2008 Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders
BS EN 12457-4:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
BS ISO 21018-4:2016 Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid. Use of the light extinction technique
BS EN 12457-2:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
BS EN 12457-3:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges. Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with a high solid content and with a particle size below 4 mm (wi
BS EN ISO 17827-2:2016 Solid biofuels. Determination of particle size distribution for uncompressed fuels. Vibrating screen method using sieves with aperture of 3,15 mm and below

Japanese Industrial Standards Committee (JISC), oil particle size

JIS R 1639-1:1999 Test methods of properties of fine ceramic granules Part 1: Size distribution of granules
JIS H 7803:2005 General rules for the determination of particle size and crystallite size in metal catalysts
JIS Z 8819-2:2001 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
JIS Z 8820:1990 General rules for the determination of particle size distribution by sedimentation in liquid
JIS H 7804:2005 Method for particle size determination in metal catalysts by electron microscope
JIS Z 8820-2:2004 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 2: Fixed pipette method
JIS B 9923:1997 Clean room garment -- Methods for sizing and counting particle contaminants in and on clean room garments
JIS Z 8820-1:2002 Determination of particle size distribution by gravitational liquid sedimentation methods -- Part 1: General principles and guidelines
JIS Z 2507:1989 Method for determination of radial crushing strength constant of metal powder sintered bearing, oil impregnated

Danish Standards Foundation, oil particle size

DS/EN 481:1994 Workplace atmospheres-Size fraction definitions for measurement of airborne particles
DS/ISO 15900:2020 Determination of particle size distribution – Differential electrical mobility analysis for aerosol particles
DS/EN 16127:2012 Solid biofuels - Determination of length and diameter of pellets
DS/EN 15238/AC:2009 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
DS/EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
DS/EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
DS/EN 933-2:1999 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
DS/EN 12457-1:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (withou
DS/CEN/TS 15439:2007 Biomass gasification - Tar and particles in product gases - Sampling and analysis

RO-ASRO, oil particle size

STAS 9546/7-1973 CHRYSOTYL ASBESTOS Determination of particle size of powdered asbestos
STAS 8473-1988 Petroleum equipment JUMPERS OF HOISTING EQUIPMENT Radii of contact surfaces

IN-BIS, oil particle size

AENOR, oil particle size

UNE 53014:2012 Plastic materials. Determination of particle size and its distribution
UNE 103102:1995 PARTICLE SIZE ANALYSIS OF A FINE SOIL BY SEDIMENTATION. DENSIMETER METHOD.
UNE-EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
UNE-EN 933-2:1996 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.
UNE-EN 933-2/1M:1999 TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES.
UNE-EN 12457-1:2003 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (withou

国家市场监督管理总局、中国国家标准化管理委员会, oil particle size

GB/T 38949-2020 Determination of pore size for porous membranes—Standard particle method
GB/T 38398-2019 Textiles—Filtration performance—Determination of most penetrating particle size
GB/T 5494-2019 Inspection of grain and oils—Determination of foreign matter and unsound kernels of grain and oilseeds

BE-NBN, oil particle size

NBN 382.211-1956
NBN M 02-005-1975 Solid minerai fuels - Size analysis of coke

Universal Oil Products Company (UOP), oil particle size

UOP 856-2007 PARTICLE SIZE DISTRIBUTION OF POWDERS BY LASER LIGHT SCATTERING

YU-JUS, oil particle size

JUS K.F0.081-1989 Grains of diamond and cubic boroo nitri?e for bonded abrasive products. Grain sizes dlstribution and designat ion

VN-TCVN, oil particle size

TCVN 6753-2000 Air quality.Particle size fraction definitions for health-related sampling
TCVN 4777-1989 Ores and concentrates of non-ferrous metals.Method of sieve and sedimentary analysis for determination of particle size
TCVN 3121-1-2003 Mortar for masonry.Test methods Part 1: Determination of maximum particle size of aggregate

European Committee for Standardization (CEN), oil particle size

FprCEN/TS 17760-2021 Inorganic fertilizers - Determination of particle size of ammonium nitrate fertilizers of high nitrogen content
prEN 933-1-1992 Tests for geometrical properties of aggregates; part 1: determination of particle size distribution; granulometric analysis (sieving method)
EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
EN 12457-4:2002 Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
EN 15238:2022 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
prEN 725-5-1992 Advanced technical ceramics; methods of test for ceramic powders; part 5: determination of the particle size distributuion
prEN 15238-2021 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
prEN 772-16-1992 Methods of test for masonry units; part 16: determination of size and dimensions (excluding natural stone masonry units)
CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis
EN 15149-1:2010 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
EN 15149-2:2010 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below

Lithuanian Standards Office , oil particle size

LST EN 16127-2012 Solid biofuels - Determination of length and diameter of pellets
LST EN 15238-2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
LST EN 15238-2007/AC-2009 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
LST EN 14530-2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
LST EN 933-2-2001 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
LST EN 12457-1-2003 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (withou

GOSTR, oil particle size

GOST 34089-2017 Solid biofuel. Determination of length and diameter of pellets

KR-KS, oil particle size

KS M ISO 17829-2021 Solid Biofuels — Determination of length and diameter of pellets
KS D 2716-2023 Measurement of nanoparticle diameter — Transmission electron microscope
KS M ISO 23202-2016 Aluminium oxide used for the production of aluminium－Determination of particles passing a 20 micrometer aperture sieve

Association of German Mechanical Engineers, oil particle size

VDI 3867 Blatt 5-2013 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Time-of-flight spectrometer
VDI 3867 Blatt 2-2008 Measurement of particulate matter in ambient air - Methods for characterizing test aerosols - Determination of the particle number concentration and particle size distribution - Condensation Particle Counter (CPC)
VDI 3867 Blatt 4-2011 Measurement of particles in ambient air - Determination of the particle number concentration and particle size distribution of aerosols - Optical aerosol spectrometer
VDI 2066 Blatt 5-1994 Particulate matter measurement - Dust measurement in flowing gases; particle size selective measurement by impaction method - Cascade impactor
VDI 3867 Blatt 3-2012 Measurement of particles in ambient air - Determination of the particle number concentration and number size distribution of aerosols - Electrical mobility spectrometer

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, oil particle size

GB/T 3780.17-2017 Carbon black—Part 17: Indirect determination of particle size—Reflectance method
GB/T 34790-2017 Inspenction of grain and oils—Determination of water activity of grains—Instrumental method
GB/T 35363-2017 Diesel fuel and petrol filters for vehicle engines—The test method for filtration efficiency and contaminant retention capacity—Method of particle counting

Professional Standard - Construction Industry, oil particle size

JG/T 5089-1997 Determination of solid particulate contaminant in fluids by the automatic particle counting method
JG/T 70-1999 Microscope count method for solid particle filth in oil liquid
JG/T 5066-1996 Determination of solid particulate contaminant in fluids by the gravimetric method

Society of Automotive Engineers (SAE), oil particle size

SAE ARP598-1991 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION OF HYDRAULIC FLUIDS BY THE PARTICLE COUNT METHOD
SAE J946C-1976 GUIDE TO THE APPLICATION AND USE OF RADIAL LIP TYPE OIL SEALS
SAE RS-199-1-1943 RS199 Standard Diameters of Shock Absorbers and Jack Cylinders
SAE AMS2553-1963 CLEANING, PACKAGING, AND ASSEMBLY OF CRITICAL SYSTEM COMPONENTS Clean Area Procedure, 2500 Micron Max Particle Size
SAE AMS2552-1963 CLEANING, PACKAGING, AND ASSEMBLY OF CRITICAL SYSTEM COMPONENTS Clean Room Procedure, 500 Micron Max Particle Size
SAE AMS3045E-2008 Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle Ready-to-Use
SAE ARP4285-2008 Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure
SAE AMS3046F-2009 Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle, Aerosol Packaged
SAE AMS3041E-2008 Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Ready-to-Use
SAE ARP785-1963 PROCEDURE FOR THE DETERMINATION OF PARTICULATE CONTAMINATION IN HYDRAULIC FLUIDS BY THE CONTROL FILTER GRAVIMETRIC PROCEDURE
SAE ARP5376C-2021 Methods, Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids
SAE ARP785B-2020 Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure
SAE TS76-2-2004 TS76 Standard Method for Sampling and Processing Aerospace Hydraulic Fluids for Subsequent Evaluation of Particle Contamination

ZA-SANS, oil particle size

SANS 6241:2006 Particle size distribution of material of diameter smaller than 75 ?m in fine aggregate (hydrometer method)
SANS 6244:2006 Particles of diameter not exceeding 20 ?m and not exceeding 5 ?m and smaller, respectively, in fine aggregate (pipette method)

Professional Standard - Agriculture, oil particle size

GB 5519-1988 Determination method of thousand-grain weight of grain and oilseeds
LS/T 6141-2023 Determination of Grain and Oil Inspection Rice Soaking Cracks

SAE - SAE International, oil particle size

SAE R-471-2018 Reducing Particulate Emissions in Gasoline Engines
SAE ARP4285A-2018 Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure
SAE ARP5376A-2003 Methods@ Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids
SAE ARP5376-1998 Methods@ Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids

未注明发布机构, oil particle size

BS ISO 23202:2006(2007) Aluminium oxide used for the production of aluminium — Determination of particles passing a 20 micrometre aperture sieve
DIN EN ISO 1524:2002 Coating materials and printing inks Determination of grinding fineness (graininess)
BS 5540-6:1990(2011) Evaluating particulate contamination of hydraulic fluids — Part 6 : Method of calibrating liquid automatic particle - count instruments (using mono - sized latex spheres)
SAE ARP785A-1996 Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure

NATO - North Atlantic Treaty Organization, oil particle size

STANAG 3713-1990 Determination of Particulate Matter in Aerospace Hydraulic Fluids Using a Particle Size Analyser (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +

Malaysia Standards, oil particle size

MS 81 Pt.12-2001 Method of sampling and test for spices and condiments:Part 12:Determination of particle size

PK-PSQCA, oil particle size

PS 282-1963 METHOD OF TEST FOR AMOUNT OF MATERIAL FINER THAN No. 200 BS SIEVE IN AGGREGATES

CZ-CSN, oil particle size

CSN 46 1011 Cast.16-1988 Testing of cereals, legumes and oil-bearing crops. Cereal testing. Determination of large and small grained maize
CSN 46 1011-11-2003 Testing of cereals, pulses and oilseeds - Part 11: Testing of cereals - Determination of the rate of grains with reduced vitreousness of durum wheat (Triticum durum)
CSN 65 6220-1984 Oils. Determination of particulate contaminant on membrane filter
CSN 65 6081-1983 Petroleum produrts. Microscopical sizing and couting contaminating partiles
CSN 73 6152-1966 Surfacing of pavements made of aggre- gates precoated with asphalto-tar emulsion
CSN 65 6206-1989 Hydraulic fluids and oils. Method for oding level of contamination by so- id particles
CSN 461011-11-2003 Testing of cereals, pulses and oilseeds - Part 11: Testing of cereals - Determination of the rate of grains with reduced vitreousness of durum wheat (Triticum durum)
CSN 46 1011 Cast.21-1988 Testing of cereals, legumes and oil-bearing crops. Legume testing. Determination of impurities. Pea and lentil granularity

Standard Association of Australia （SAA）, oil particle size

AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method

AT-ON, oil particle size

ONORM L 1061-2-2002 Physical analysis of soils - Determination of particle size distribution in mineral soils - Part 2: Feinboden
ONORM L 1061-1-2002 Physical analysis of soils - Determination of particle size distribution in mineral soils-Part 1: Coarse soil

Group Standards of the People's Republic of China, oil particle size

T/CAS 542-2021 Technical requirements and evaluation methods of air cleaner removing performance for small particles pollutant

US-FCR, oil particle size

FCR COE P-1 FINAL REPORT-1992 PARTICLE SIZE DISTRIBUTIONS OF BED SEDIMENTS ALONG THE THALWEG OF THE MISSISSIPPI RIVER, CAIRO, ILLINOIS, TO HEAD OF PASSES

Professional Standard - Energy, oil particle size

NB/SH/T 6017-2020 Test Method for Automatic Particle Counting and Particle Shape Classification of Oil Using a Direct Imaging Synthetic Test Apparatus

United States Navy, oil particle size

NAVY QPL-25896-19 NOTICE 1-2003 ADAPTER, PRESSURE FUEL SERVICING, NOMINAL 2.5 INCH DIAMETER
NAVY QPL-25896-19-1996 ADAPTER, PRESSURE FUEL SERVICING, NOMINAL 2.5 INCH DIAMETER

NL-NEN, oil particle size

NEN 3959-1982 Bitumen and tar products Determination of the partiele charge of emulsified bitumen

CEN - European Committee for Standardization, oil particle size

PREN 933-2-2019 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves@ nominal size of apertures
PD CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis

API - American Petroleum Institute, oil particle size

API PUBL 4365-1983 Characterization of Particulate Emissions from Refinery Process Heaters and Boilers
API PUBL 4363-1983 Particulate Emissions from Non-Fired Sources in Petroleum Refineries: a Review of Existing Data (Withdrawn)
API PUBL 1669-1994 Results of a Retail Gasoline Outlet and Commercial Parking Lot Storm Water Runoff Study

IT-UNI, oil particle size

Professional Standard - Automobile, oil particle size

QC/T 1001-2015 Evaluating filtration performance of lubricating oil filters for automobiles.Method of particle counting
QC/T 1007-2015 Evaluating filtration performance of fuel filters for automobiles.Method of particle counting
QC/T 29104-2013 Limiting value of contamination level of solid particles of special purpose vehicle hydraulic system

American National Standards Institute （ANSI), oil particle size

ANSI/ASTM F2519:2011 Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., oil particle size

ASHRAE GUIDELINE 26-2012 Guideline for Field Testing of General Ventilation Filtration Devices and Systems for Removal Efficiency In-Situ by Particle Size and Resistance to Airflow
ASHRAE LO-09-010-2009 Grease Particle Emission Characterization from Seven Commercial Kitchen Cooking Appliances and Representative Food Products
ASHRAE CH-06-8-1-2006 A New Standard Method of Test for Determining the Grease Particulate Removal Efficiency of Filter Systems for Kitchen Ventilation

Professional Standard - Non-ferrous Metal, oil particle size

YS/T 587.12-2006 Calcined coke for prebaked blocks. Testing methods. Part 12: Determination of particle size distribution
YS/T 587.11-2006 Calcined coke for prebaked blocks. Testing methods. Part 11: Determination of grain stability

TH-TISI, oil particle size

TIS 275-1978 Standard for coconut meal or copra meal or oilcake or pellets as livestock feed