ZH
RU
ES

Fuel cell testing

Fuel cell testing, Total:500 items.

In the international standard classification, Fuel cell testing involves: Fuel cells, Aircraft and space vehicles in general, Railway engineering in general, Aerospace electric equipment and systems, Galvanic cells and batteries, Fuels, Environmental protection, Vocabularies, Measurement of fluid flow, Construction materials, Electric road vehicles, Railway rolling stock, Company organization and management, Electricity. Magnetism. Electrical and magnetic measurements, Nuclear energy engineering, Electrical and electronic testing, Internal combustion engines for road vehicles, Road vehicle systems, Diagnostic, maintenance and test equipment, Commercial vehicles, Natural gas, Rectifiers. Convertors. Stabilized power supply, Electrical accessories, Powder metallurgy, Electromagnetic compatibility (EMC), Burners. Boilers, Wind turbine systems and other alternative sources of energy, Wastes, Electrical equipment for working in special conditions, Transport, Protection against fire, Electrical wires and cables, Ceramics, Motor cycles and mopeds, Electrical engineering in general, Crude petroleum, Explosion protection, Measurement of volume, mass, density, viscosity, Inorganic chemicals, Organic chemicals, Alarm and warning systems, Non-destructive testing, Lubricants, industrial oils and related products, Analytical chemistry, Insulating materials, Industrial automation systems, Geology. Meteorology. Hydrology, Products of the chemical industry, Energy and heat transfer engineering in general, Services, Plastics, Petroleum products in general, Elements of buildings, Accident and disaster control, Testing of metals, TESTING, Power stations in general, Fertilizers, Packaging materials and accessories, Pipeline components and pipelines.

Group Standards of the People's Republic of China, Fuel cell testing

T/CASME 674-2023 Specification for performance test of voltage monitors for fuel cell systems
T/SDAS 187-2020 Fule cell rolling stock-Performance test methods of fuel cell stack
T/CIET 228-2023 Detection methods for retired lithium batteries
T/GERS 0006-2021 Technical requirements for gas tightness detection and substitution of onboard hydrogen supply system of fuel cell electric vehicle
T/MBJX 0004-2020 State of Charge Detection Method for Lithium-ion Power Batteries
T/CAB 0246-2023 General technical specification for hydrogen quality detection for proton exchange membrane fuel cell of mobile laboratory
T/CES 174-2022 Test specification for lithium ion battery storage compartment
T/CAQI 324-2023 Specifications for training and evaluation of battery testing personnel
T/CSAE 276-2022 Fuel cell stack vibration test specification
T/CBHA 001-2022 Examing & assessment specification for EV batterries
T/GDBIA 06-2023 Specification for safety testing of ternary cathode materials for lithium-ion batteries
T/CES 063-2021 Technical specification of retired power battery for screening detection
T/CITS 0021-2023 New energy traction battery air impermeability inspection equipment
T/GDMES 0042-2023 Technical specification for testing system for high-voltage power batteries
T/CAQI 329-2023 Electric vehicle traction battery testing service specification
T/XQGX 001-2022 Standards for the Administration of Battery Samples of Inspection and Testing Institutions Part 1: Receiving
T/XQGX 002-2022 Standards for the Administration of Battery Samples of Inspection and Testing Institutions Part 2: Temporary Storage
T/XQGX 003-2022 Standards for the Administration of Battery Samples of Inspection and Testing Institutions Part 3: Disposal
T/CAAMTB 12-2020 Proton exchange membrane fuel cell membrane electrode test method
T/GDBIA 01-2023 Regulations of electric bicycle battery rapid testing
T/FSYY 0050-2021 Retired traction battery echelon use — Test methods of residual capacity
T/CES 172-2022 Test specification for battery management system of electrochemical energy storage station
T/CPSS 1001-2023 Technical specification of bidirectional AC-DC power module for lithium-based battery test
T/CI 090-2023 Performance test methods of ejector for fuel cell system
T/CATAGS 65-2023 Detection methods for trace elements in aviation biofuels
T/SCAS 04-2023 5G base station battery controller technical requirements and testing specifications
T/SCAS 04-2022 Base station 5G battery controller technical requirements and testing specifications
T/CCAS 027-2022 Determination of radionuclides in cement, raw materials & fuel
T/CEC 461-2021 Operating procedures for performance testing of lithium-ion batteries used in electrochemical energy storage power stations
T/GERS 0001-2020 Test method of critical control points in the production of lithium-ion traction battery
T/SEIA 001-2020 General technical requirements and test method of electric bicycles-cell or battery
T/CIAPS 0018-2022 Composition Detection Method and Toxicity Classification of Traction Battery Thermal Runaway Leakage
T/CASME 520-2023 Test method for proton exchange membrane fuel cell coating metal bipolar plate
T/ESD 2005-2022 Measurement method for fractional voltage of planar materials
T/CI 035-2022 Calibration method of magnification of X-ray detection equipment for lithium ion battery
T/DZJN 168-2023 Calculation and detection method of recovery rate of valuable metals in waste power batteries
T/ZJCX 0034-2023 Test standard of graphite bipolar plate characteristics for proton exchange membrane fuel cell
T/CIECCPA 044-2023 Test specfication for filter bag performance of bag house in coal-fired power plant
T/DZJN 38-2021 Technical guide for residual energy detection and residual value evaluation of decommissioned power battery modules
T/GHDQ 47-2019 Technical conditions of fuel cell stack life test at subzero environment for fuel cell vehicles in frigid regions
T/CEC 171-2018 Lithium-ion battery cycle life requirements and rapid detection test methods for power energy storage
T/CES 176-2022 Evaluation method for lifetime of stationary proton exchange membrane fuel cell stack
T/GDASE 0014-2020 Phased Array Ultrasonic Testing of Electrofusion Welded Joints of Polyethylene Gas Pipelines
T/CIECCPA 049-2023 Technical specification for detection and evaluation of SCR catalyst in coal-fired power plant
T/CAS 318-2018 Halogen content detection for polymers of wire and cable- Oxygen bomb-ion chromatography
T/JXQN 2002-2022 Salt spray corrosion test and grade evaluation of fuel cell engine system in coastal area
T/CEC 131.11-2020 Secondary utilization of lead-acid batteries Part 11: Technical specifications for plate failure detection - potential difference method
T/CSTE 0007-2020 Determination of Trace Carbon Monoxide in Hydrogen Fuel - The Method of Mid-infrared Laser Spectroscopy for PEMFC

HU-MSZT, Fuel cell testing

United States Navy, Fuel cell testing

NAVY MIL-B-6937-1950 BATTERY TESTER
NAVY MIL-STD-801 C-2005 INSPECTION AND ACCEPTANCE STANDARDS FOR FUEL CELLS AND FITTINGS
NAVY QPL-81380-5-1988 MONITOR, CONTAMINATION, FUEL DISPENSING SYSTEM

International Electrotechnical Commission (IEC), Fuel cell testing

IEC 105/429/CD:2012 IEC 62282-7-2: Fuel cell technologies - Part 7-2: Single cell/stack performance test methods for solid oxide fuel cells (SOFC)
IEC 105/241/DTS:2009 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
IEC TS 62282-7-1:2017 Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC)
IEC 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
IEC 62282-3-200:2015 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
IEC 62282-6-200:2016 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
IEC 62282-6-200:2007 Fuel cell technologies - Part 6-2: Micro fuel cell power systems - Performance test methods
IEC 62282-6-200:2012 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
IEC 62282-4-600:2022 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for exc
IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
IEC 62282-4-202:2023 Fuel cell technologies - Part 4-202: Fuel cell power systems for propulsion and auxiliary power units - Unmanned aircrafts - Performance test methods
IEC 60754-2:2011 Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductibity
IEC 60754-1:2011 Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content

国家质量监督检验检疫总局, Fuel cell testing

SN/T 4444-2016 Technical requirements for inspection of imported and exported fuel cells Safety of portable fuel cell power generation systems
SN/T 4550-2016 Safety performance testing methods for import and export of alkaline and non-acid secondary batteries
SN/T 1652-2017 Detection methods for fuel oil contaminants in imported and exported gas turbines and diesel engines Rotating disk electrode atomic emission spectrometry

British Standards Institution (BSI), Fuel cell testing

PD IEC/TS 62282-7-1:2017 Fuel cell technologies. Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC)
BS EN 62282-3-201:2017+A1:2022 Fuel cell technologies - Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
BS EN IEC 62282-7-2:2021 Tracked Changes. Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells
BS PD IEC/TS 62282-7-2:2014 Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
BS EN 62282-6-200:2017 Tracked Changes. Fuel cell technologies. Micro fuel cell power systems. Performance test methods
20/30412786 DC BS EN 62282-7-2. Fuel cell technologies. Part 7-2. Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
23/30470506 DC BS EN IEC 62282-3-201. Fuel cell technologies - Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
20/30422600 DC BS EN 62282-3-201 AMD1. Fuel cell technologies. Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
19/30397959 DC BS EN 62282-3-201 AMD1. Fuel cell technologies. Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
PD ISO/TR 11954:2008 Fuel cell road vehicles. Maximum speed measurement
BS EN IEC 62282-4-102:2023 Tracked Changes. Fuel cell technologies. Fuel cell power systems for electrically powered industrial trucks. Performance test methods
BS EN IEC 62282-4-600:2022 Fuel cell technologies - Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell/battery hybrid systems performance test methods for excavators
23/30470502 DC BS EN IEC 62282-3-200. Fuel cell technologies - Part 3-200. Stationary fuel cell power systems. Performance test methods
BS EN IEC 62282-8-201:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems
BS ISO 23828:2013 Fuel cell road vehicles. Energy consumption measurement. Vehicles fuelled with compressed hydrogen
BS EN IEC 62282-8-101:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
21/30402128 DC BS ISO 23828. Fuel cell road vehicles. Energy consumption measurement. Vehicles fuelled with compressed hydrogen
PD IEC/TR 61430:1997 Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
20/30419213 DC BS EN 62282-4-202. Fuel cell technologies. Part 4-202. Fuel Cell Power Systems for unmanned aircraft systems. Performance test methods
21/30434916 DC BS EN 62282-4-600. Fuel cell technologies. Part 4-600. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell/battery hybrid power pack systems performance test methods for excavators
BS ISO 23828:2022 Tracked Changes. Fuel cell road vehicles. Energy consumption measurement. Vehicles fuelled with compressed hydrogen
BS EN IEC 62282-8-102:2020 Fuel cell technologies - Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
21/30440606 DC BS EN 62282-6-401. Fuel cell technologies. Part 6-401. Micro fuel cell power systems. Power and data interchangeability. Performance test methods for laptop computers
BS EN 60811-502:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Shrinkage test for insulations
20/30402570 DC BS IEC 62282-4-600. Fuel cell technologies. Part 4-600. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell and battery hybrid power pack systems performance test methods for excavators
BS EN 60811-606:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Methods for determining the density
22/30445185 DC BS EN 62282-8-201. Fuel cell technologies. Part 8-201. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems
BS EN 50054:1991 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
BS EN 50054:1999 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
BS EN 50270:2007 Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
BS EN 50270:1999 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
17/30352625 DC BS IEC 62282-8-101. Fuel cell technologies. Part 8-101. Energy storage systems using fuel cell modules in reverse mode. Test procedures for solid oxide single cell and stack performance including reversing operation
18/30352664 DC BS IEC 62282-8-102. Fuel cell technologies. Part 8-102. Energy storage systems using fuel cell modules in reverse mode. Test procedures for proton exchange membrane single cell and stack performance including reversing operation
21/30440998 DC BS EN IEC 62282-4-102. Fuel cell technologies. Part 4-102. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell power systems for electrically powered industrial trucks. Performance test methods
BS EN 61779-1:2000 Electrical apparatus for the detection and measurement of flammable gases - General requirements and test methods
BS EN 50194:2000 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
BS EN 50402:2017 Tracked Changes. Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of gas detection systems
BS EN 17246:2019 Fertilizers. Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD)
21/30433542 DC BS EN 62282-8-301. Fuel cell technologies. Part 8-301. Energy storage systems using fuel cell modules in reverse mode. Power to methane energy systems based on solid oxide cells including reversible operation. Performance test methods
BS EN 50194-1:2009 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
BS EN 50194-2:2006+A1:2016 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
BS EN 60811-100:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General
BS EN 50267-2-1:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas
BS ISO 15500-2:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Performance and general test methods
19/30398559 DC BS EN 50270. Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
BS EN 60811-202:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of thickness of non-metallic sheath

Society of Automotive Engineers (SAE), Fuel cell testing

SAE J2615-2005 Testing Performance of Fuel Cell Systems for Automotive Applications
SAE J2615-2011 Testing Performance of Fuel Cell Systems for Automotive Applications
SAE J2616-2011 Testing Performance of the Fuel Processor Subsystem of an Automotive Fuel Cell System
SAE J2572-2006 Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fuelled by Compressed Gaseous Hydrogen
SAE J2572-2008 Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fuelled by Compressed Gaseous Hydrogen
SAE AIR6202-2017 Test Cell Mass Fuel Flow Measurement Using Coriolis Flow Meters
SAE J2617-2007 Recommended Practice for Testing Performance of PEM Fuel Cell Stack Sub-system for Automotive Applications

Professional Standard - Energy, Fuel cell testing

NB/T 20564-2019 Poolside inspection of irradiated fuel assembly in pressure water reactor nuclear power plant
NB/T10820-2021
NB/T10821-2021
NB/SH/T 0908-2015 Standard test method for determining stability and compatibility of heavy fuel oils and crude oils by heavy fuel oil stability analyzer (optical detection)
NB/T 10670-2021 Solid Oxide Fuel Cell Electrolyte Membranes Test Methods Part 1: Self-supporting Membranes
NB/T10670-2021
NB/SH/T 0919-2015 Standard test method for determination of sulfur compounds in gaseous fuels and natural gas by gas chromatography and chemiluminescence
NB/SH/T 0939-2016 Determination of Aromatics Content in Aviation Fuel and Petroleum Fractions by High Performance Liquid Chromatography with Differential Refractive Detection

German Institute for Standardization, Fuel cell testing

DIN 51773:1996 Testing of liquid fuels - Determination of ignition quality (cetane number) of Diesel fuels with the BASF-engine
DIN 51705:2001 Testing of solid fuels - Determination of the bulk density of solid fuels
DIN 51725:2004 Testing of solid fuels - Determination of the phosphorus content
DIN 51717:2016 Testing of solid fuels - Determination of mechanical strength of coke
DIN 51717:1994 Testing of solid fuels; determination of mechanical strength of coke
DIN IEC/TS 62282-7-2:2015 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFC) (IEC/TS 62282-7-2:2014)
DIN IEC/TS 62282-7-1:2017 Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC) (IEC/TS 62282-7-1:2017)
DIN 51424:1981 Testing of oil fuels; determination of the furfural content of oil fuel
DIN 51773:2010 Testing of liquid fuels - Determination of ignition quality (cetane number) of Diesel fuels with the BASF-engine
DIN IEC/TS 62282-7-2:2011 Fuel cell technologies - Part 7-2: Single cell/stack-performance test methods for solid oxide fuel cells (SOFC) (IEC 105/322/NP:2011)
DIN 51762:1974 Testing of Liquid Fuels; Determination of Reaction to Sulphuric Acid
DIN 51798:2018 Testing of liquid fuels - Determination of the crystallization point of pure benzene
DIN 51798:2005 Testing of liquid fuels - Determination of the crystallization point of pure benzene
DIN 51426:2011-09 Testing of fuel oil - Spectrophotometric determination of the red dye content in domestic fuel oil
DIN 51774-3:1989 Testing of liquid fuels; determination of bromine acceptance by iodometric method (BC)
DIN 51726:2004 Testing of solid fuels - Determination of the carbonate carbon dioxide content
DIN 51862:1982 Testing of gaseous fuels and other gases; determination of naphthalene content (crude naphthalene)
DIN 51081:2002 Testing of oxidic raw materials and materials - Determination of change in mass on ignition
DIN 51551-1:1993 Testing of lubricants and liquid fuels; determination of the carbon residue; Conradson method
DIN 4862:2019-04 Testing of ceramic raw and basic materials - Acid pressure digestion of ash residues after combustion of carbon and graphite materials
DIN 51756-3:1987 Testing of liquid and gaseous fuels; determination of knocking characteristics (octane number); determination with the BASF-motor
DIN 51722-1:1990 Testing of solid fuels; determination of nitrogen content; semi-micro Kjeldahl method
DIN 51733:2016-04 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN 51869:2000 Testing of gaseous fuels and other gases - Determination of water content according to Karl Fischer - coulometric method
DIN 51400-7:1992 Testing of mineral oils and fuels; determination of sulfur content (total sulfur); microcoulometric determination, oxidation method
DIN 51872-4:1990 Testing of gaseous fuels and other gases; determination of the components; gaschromatographic procedure
DIN EN 50270:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen; German version EN 50270:2006
DIN 51900:2022-06 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value / Note: Date of issue 2022-05-06*Intended as replacement for DIN 51900-1 (2000-04), DIN 51900-1 Berichtigung 1 (20...
DIN 51863-2:1983 Testing of gaseous fuels and other gases; determination of hydrogen cyanide content; bromide cyanogen method
DIN 4102-7:2018 Fire behaviour of building materials and building components - Part 7: Roofing - Requirements and testing
DIN 53494:1984 Electroplated coatings; testing of electroplated plastic articles; determination of peel strenght
DIN 51797-4:1981 Testing of liquid fuels; determination of the sodium content; direct determination by atomic absorption spectroscopy
DIN 51400-2:2001 Testing of mineral oils and fuels - Determination of sulfur content (total sulfur) - Part 2: Combusting according to Grote-Krekeler; acidimetric titration; gravimetric determination
DIN EN ISO 5659-2:2007 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2006); English version of DIN EN ISO 5659-2:2007-04
DIN 51863-1:1983 Testing of gaseous fuels and other gases; determination of hydrogen cyanide content; nickel carbonate method
DIN 51797-3:1973 Testing of liquid fuels; determination of the sodium content, determination by atomic absorption spectroscopy after incineration
DIN EN IEC 62282-8-102:2021 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation (IEC 62282-8-102:2019); Ger
DIN 4102-7:1998 Fire behaviour of building materials and building components - Part 7: Roofing; definitions, requirements and testing
DIN 51855-7:1986-12 Testing of gaseous fuels and other gases; determination of the content of sulfur compounds; gaschromatographic determination of the content of odoriferous sulfur compounds using an electrochemical detector
DIN 51400-1:1992 Testing of mineral oils and fuels; determination of the sulfur content (total sulfur); general working principles
DIN EN 17246:2018 Fertilizers - Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD); German and English version prEN 17246:2018
DIN EN 17246:2019 Fertilizers - Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD)
DIN EN 17246:2019-11 Fertilizers - Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD); German version EN 17246:2019

National Aeronautics and Space Administration (NASA), Fuel cell testing

NASA UFGS-28 33 00.00 40-2008 FUEL-GAS DETECTION AND ALARM

RU-GOST R, Fuel cell testing

GOST IEC/TS 62282-7-1-2016 Fuel cell technologies. Part 7-1. Single cell test methods for polymer electrolyte fuel cell
GOST ISO/TR 11954-2016 Fuel cell road vehicles. Maximum speed measurement
GOST 8.212-1984 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
GOST R ISO 23828-2013 Fuel cell road vehicles. Energy consumption measurement. Vehicles fuelled with compressed hydrogen
GOST R IEC 61430-2004 Secondary cells and batteries. Test methods for checking the performance of devices designed for reducing explosion hazards. Lead-acid starter batteries
GOST R 52136-2003 Electrical apparatus for the detection and measurement of flammable gases. Part 1. General requirements and test methods
GOST EN 50270-2012 Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

国家能源局, Fuel cell testing

NB/T 10820-2021 Solid oxide fuel cell single cell test method
NB/T 10821-2021 Solid oxide fuel cell stack test method
NB/T 33024-2016 Testing specifications for power lithium-ion batteries for electric vehicles
SY/T 7657.4-2021 Determination of natural gas using photoacoustic spectroscopy-infrared spectroscopy-fuel cell combined method Part 4: Determination of hydrogen content by fuel cell method
NB/T 10628-2021 Technical Specifications for Testing and Inspection of Wind Farm Engineering Materials

国家市场监督管理总局、中国国家标准化管理委员会, Fuel cell testing

GB/T 28817-2022 Single cell test methods for polymer electrolyte fuel cell (PEFC)
GB/T 37154-2018 Fuel cell electric vehicles—Test methods of hydrogen emission
GB/T 39429-2020 Non-destructive testing—Method for thermoelectric sorting of electrically conductive materials
GB/T 20042.3-2022 Proton exchange membrane fuel cell—Part 3: Test method for proton exchange membrane
GB/T 38914-2020 Evaluation method for lifetime of proton exchange membrane fuel cell stack in vehicle application

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fuel cell testing

GB/T 28817-2012 Single cell test methods for polymer electrolyte fuel cell (PEFC)
GB 11012-1989 Inspection procedures for electrical performance test equipments for solar cells
GB/T 25448-2010 Helium leak testing of PHWR nuclear fuel bundles
GB/T 28183-2011 Test methods of fuel cell power system for bus
GB/T 25450-2010 Eddy current testing of fuel element end cap weld for PHWR
GB/T 23645-2009 Test methods of fuel cell power system for passenger cars
GB/T 25447-2010 Proton exchange membrane fuel cell test bench and activation bench
GB/T 41704-2022 Test methods of cathode materials for lithium ion battery—Determination of magnetic impurities content and residual alkali content
GB/T 20042.5-2009 Proton exchange membrane fuel cell.Part 5:Test method for membrane electrode assembly
GB/T 18566-2011 Inspection and evaluation method of fuel consumption for road transport vehicle
GB/T 20042.4-2009 Proton exchange membrane fuel cell.Part 4:Test method for electrocatalysts
GB/Z 27753-2011 Test method for adaptability to operating conditions of membrane electrode assembly used in PEM fuel cells
GB/T 42719-2023 Triboelectric voltage detection method for planar materials
GB/T 20042.7-2014 Proton exchange membrane fuel cells.Part 7: Test method of carbon paper properties
GB/T 20042.3-2009 Proton exchange membrane fuel cell.Part 3:Test method for proton exchange membrane
GB/T 20042.6-2011 Proton exchange membrane fuel cell.Part 6: Test method of bipolar plate properties
GB/T 28044-2011(英文版) General guide of detection method for nanomaterial biological effect by transmission electron microscope

Danish Standards Foundation, Fuel cell testing

DS/IEC/TS 62282-7-1:2012 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
DS/EN IEC 62282-7-2:2021 Fuel cell technologies – Part 7-2: Test methods – Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
DS/EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
DS/EN 62282-6-200:2013 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
DS/EN 62282-3-200:2012 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
DS/EN 50270:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
DS/EN 50402/A1:2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
DS/EN 50402:2006 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems

Korean Agency for Technology and Standards (KATS), Fuel cell testing

KS C IEC TS 62282-7-2:2016 Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC)
KS C IEC 62282-3-200-2014(2019) Fuel cell technologies — Part 3-200: Stationary fuel cell power systems — Performance test methods
KS C IEC 62282-6-200-2014(2019) Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
KS C IEC 62282-3-200:2014 Fuel cell technologies — Part 3-200: Stationary fuel cell power systems — Performance test methods
KS C IEC 62282-6-200:2009 Micro fuel cell power systems-Performance test methods
KS C IEC 62282-6-200:2014 Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
KS C IEC 61779-6:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 6：Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
KS F 2835-2015 Reaction to fire tests for building products exposed to the thermal attack by a single burning item
KS F 2835-2009 Reaction to fire tests for building products exposed to the thermal attack by a single burning item
KS C IEC 61779-6-2003(2018)
KS M ISO 5659-2:2012 Plastics-Smoke generation-Part 2:Determination of optical density by a single-chamber test
KS M ISO 14597:2003 Petroleum products－Determination of vanadium and nickel content－Wavelength-dispersive X-ray fluorescence spectrometry
KS C 6598-2007(2018) Electrical apparatus for the detection of combustible gases in domestic premises－Test methods and performance requirements
KS C IEC 61779-1-2003(2018)
KS C IEC 61779-1:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 1：General requirements and test methods

ES-UNE, Fuel cell testing

UNE-EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs) (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (Endorsed by Asociación Española de Normalización in December of 2017.)
UNE-EN 62282-3-201:2017/A1:2022 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (Endorsed by Asociación Española de Normalización in April of 2022.)
UNE-EN 62282-3-200:2016 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods (Endorsed by AENOR in April of 2016.)
UNE-EN 62282-6-200:2017 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (Endorsed by Asociación Española de Normalización in March of 2017.)
UNE-EN 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods (Endorsed by Asociación Española de Normalización in August of 2017.)
UNE-EN IEC 62282-4-102:2023 Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods (Endorsed by Asociación Española de Normalización in March of 2023.)
UNE-EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation (Endorsed by Asociación...
UNE-EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems (Endorsed by Asociación Española de Normalización in April of 2020.)
UNE-EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation (Endorsed by Asociación Española de Norma...
UNE-EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems (Endorsed by Asociación Española de Normalización in June of 2017.)
UNE-EN 50270:2016/AC:2016-08 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
UNE-EN 50270:2016 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

European Committee for Electrotechnical Standardization（CENELEC）, Fuel cell testing

EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
EN 62282-6-200:2012 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
EN 62282-6-200:2017 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
EN IEC 62282-4-102:2023 Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods
EN 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods
EN IEC 62282-4-600:2022 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators
EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
FprEN 50270:2021 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
EN IEC 62282-8-301:2023 Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods

Association Francaise de Normalisation, Fuel cell testing

NF C56-282-7-2*NF EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2 : test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
NF EN 62282-6-200:2017 Technologies des piles à combustibles - Partie 6-200 : Systèmes à micro-piles à combustible - Méthodes d'essai des performances
NF EN 15502-2-1/IN1:2017 Technologies des piles à combustibles - Partie 6-200 : Systèmes à micro-piles à combustible - Méthodes d'essai des performances
NF C56-282-6-200:2008 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods.
NF C56-282-6-200:2012 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods
NF M07-052:2000 Fuels-oils et distillats légers - Dosage du soufre par combustion et détection coulométrique de SO2
NF EN 62282-3-200:2016 Technologies des piles à combustible - Partie 3-200 : systèmes à piles à combustible stationnaires - Méthodes d'essai des performances
NF C56-282-3-201/A1*NF EN 62282-3-201/A1:2022 Fuel cell technologies - Part 3-201 : stationary fuel cell power systems - Performance test methods for small fuel cell power systems
NF C56-282-3-201*NF EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
NF C56-282-6-200*NF EN 62282-6-200:2017 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods
NF C56-282-3-200*NF EN 62282-3-200:2016 Fuel cell technologies - Part 3-200 : stationary fuel cell power systems - Performance test methods
NF C56-282-4-102*NF EN 62282-4-102:2017 Fuel cell technologies - Part 4-102 : fuel cell power systems for industrial electric trucks - Performance test methods
NF C32-074-22:2000 Common test methods for cables under fire conditions - Test on gas evolved during combustion of materials from cables - Part 2-2 : procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity.
NF EN IEC 62282-8-201:2020 Technologies des piles à combustible - Partie 8 201 : systèmes de stockage de l'énergie utilisant des modules à piles à combustible en mode inversé - Procédures d'essai pour la performance des systèmes électriques à électriques
NF C56-282-8-101*NF EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101 : energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
NF C23-570:2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
NF C23-570*NF EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
NF C23-596*NF EN 50402:2017 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems
NF EN 50402:2017 Matériel électrique pour la détection et la mesure des gaz ou vapeurs combustibles ou toxiques ou de l'oxygène - Exigences relatives à la sécurité fonctionnelle des systèmes de détection de gaz
NF C56-282-8-201*NF EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
NF EN 50270:2015 Compatibilité électromagnétique - Appareils de détection et de mesure de gaz combustible, de gaz toxique et d'oxygène
NF C23-570:2000 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen.
NF C56-282-8-102*NF EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102 : energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
NF EN 16340:2014 Dispositifs de commande et de sécurité pour brûleurs et appareils utilisant des combustibles gazeux ou liquides - Dispositifs de détection des produits de combustion
NF M07-070:1993 Combustibles liquides - Combustibles pour moteurs diesel et pour installations de chauffage domestique - Recherche des micro-organismes aérobies par le test de la lame immergée.
NF C32-074-23:2000 Common test methods for cables under fire conditions - Test on gas evolved during combustion of materials from cables - Part 2-3 : Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and condu
NF C23-560-1/A11:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 1 : general requirements and test methods.
NF C23-560-1:2005 Electrical apparatus for the detection and measurement of flammable gases - Part 1 : general requirements and test methods.
NF EN 50194-1:2009 Matériels électriques pour la détection des gaz combustibles dans les locaux à usage domestique - Partie 1 : méthodes d'essai et exigences d'aptitude à la fonction

Hebei Provincial Standard of the People's Republic of China, Fuel cell testing

DB13/T 1666-2012 Solar cell module electroluminescence detector
DB13/T 5049-2019 Specifications for safety inspection and inspection of explosion-proof battery electric locomotives in use in coal mines
DB13/T 2768.3-2018 Graphene powder material testing method Part 3: Determination of electrical conductivity

IEC - International Electrotechnical Commission, Fuel cell testing

TS 62282-7-1-2010 Fuel cell technologies – Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC) (Edition 1.0)

Sichuan Provincial Standard of the People's Republic of China, Fuel cell testing

DB51/T 2191-2016 General testing method for vanadium redox flow battery

Indonesia Standards, Fuel cell testing

SNI 03-6771-2002 Test methods for ignitability of building materials

Anhui Provincial Standard of the People's Republic of China, Fuel cell testing

DB34/T 2649-2016 Specifications for safety inspection and inspection of explosion-proof battery electric locomotives in use in coal mines

PL-PKN, Fuel cell testing

PN BN 6041-11-1966
PN-EN IEC 62282-8-101-2020-11 E Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation (IEC 62282-8-101:2020)

European Committee for Standardization (CEN), Fuel cell testing

CENELEC EN 62282-6-200-2008 Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
EN 50054:1998 Electrical Apparatus for the Detection and Measurement of Combustible Gases - General Requirements and Test Methods
EN 50054:1991 Electrical apparatus for the detection and measurement of combustible gases; general requirements and test methods

AENOR, Fuel cell testing

UNE-EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
UNE-EN 62282-6-200:2013 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
UNE-EN 62282-3-200:2012 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
UNE-EN 50402:2006 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems
UNE-EN 50402:2006/A1:2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems

SE-SIS, Fuel cell testing

SIS SEN 08 01 03-1966 Lead-acid accumulators. Checking the 10-hour-rate capacity of stationary batteries
SIS SS-ISO 8984-2:1989 Road vehicles — Testing of fuel injectors for compression-ignition engines — Part 2: Test procedures
SIS SS-EN 50 054-1992 Electrical apparatus for the detection and measurement of combustible gases — General requirements and test methods
SIS SS-EN 50 055-1992 Electrical apparatusfor the detection and measurement ofcombustible gases - Performance requirements for Group I apparatus indicating upto5% (v/v) methane in air

CENELEC - European Committee for Electrotechnical Standardization, Fuel cell testing

EN 62282-6-200:2008 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
EN 62282-3-2:2006 Fuel cell technologies Part 3-2: Stationary fuel cell power systems - Performance test methods
EN 61779-1:2000 Electrical Apparatus for the Detection and Measurement of Flammable Gasesm Part 1: General Requirements and Test Methods

International Organization for Standardization (ISO), Fuel cell testing

ISO/CD TR 11954 Fuel cell road vehicles — Maximum speed measurement
ISO/TR 11954:2008 Fuel cell road vehicles - Maximum speed measurement
ISO/DTR 11954:2023 Fuel cell road vehicles — Maximum speed measurement
ISO 23828:2013 Fuel cell road vehicles.Energy consumption measurement.Vehicles fuelled with compressed hydrogen
ISO 23828:2008 Fuel cell road vehicles - Energy consumption measurement - Vehicles fuelled with compressed hydrogen
ISO 23828:2022 Fuel cell road vehicles — Energy consumption measurement — Vehicles fuelled with compressed hydrogen
ISO 5659-2:1994 Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test
ISO/DTS 16943 Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing

Professional Standard - Electron, Fuel cell testing

SJ/T 11061-1996 Inspection method of solar cell electrical performance testing equipment

Lithuanian Standards Office , Fuel cell testing

LST EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs) (IEC 62282-7-2:2021)
LST EN 62282-6-200-2008 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2007)
LST EN 62282-6-200-2013 Fuel cell technologies -- Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2012)
LST EN 62282-3-200-2012 Fuel cell technologies -- Part 3-200: Stationary fuel cell power systems - Performance test methods (IEC 62282-3-200:2011)
LST EN 50270-2007 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
LST EN 50402-2005 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems
LST EN 50402-2005/AC-2009 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of fixed gas detection systems
LST EN 50402-2005/A1-2008 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems

Professional Standard - Nuclear Industry, Fuel cell testing

EJ/T 20150.14-2018 Post-irradiation Inspection of PWR Bundle Fuel Assemblies Part 14: Eddy Current Inspection of Fuel Rods
EJ/T 20150.13-2018 Post-Irradiation Inspection of PWR Bundle Fuel Assemblies Part 13: X-ray Examination of Fuel Rods
EJ/T 20150.10-2018 Post-irradiation inspection of pressurized water reactor bundle fuel assemblies-Part 10: Bubble method for fuel rod leak detection
EJ/T 20150.11-2018 Post-irradiation Inspection of PWR Bundle Fuel Assemblies Part 11: Helium Mass Spectrometry for Fuel Rod Leakage Detection
EJ/T 1085-1998 Training requirements for nuclear fuel element NDT personnel
EJ/T 20150.12-2018 Post-irradiation inspection of PWR rod-bundle fuel assemblies-Part 12: Fuel rod leak detection end compression method
EJ/T 20040-2014 Detection method for failed spent fuel assembly in its cask reception process
EJ/T 781-1993 Research on detection method of uranium homogeneity in stacked fuel elements
EJ/T 20150.16-2018 Post-irradiation inspection of pressurized water reactor bundle fuel assemblies-Part 16: Internal pressure measurement of fuel rods
EJ/T 20150.28-2018 Post-irradiation Inspection of PWR Bundle Fuel Assemblies Part 28: Activity Method for Absolute Burnup Measurement of Fuel Rods
EJ/T 20150.27-2018 Post-irradiation inspection of fuel assemblies of pressurized water reactor bundle type - Part 27: Mass spectrometry for absolute burnup measurement of fuel rods
EJ/T 686-1992 Detection method of 235U enrichment in reactor fuel rods Gamma-ray energy spectrometry
EJ/T 20150.29-2018 Post-irradiation inspection of PWR rod-bundle fuel assemblies-Part 29: Measurement of hydrogen content in fuel cladding tubes by high-frequency electrode thermal conductivity method
EJ/T 1092-1999 Determination of gaps between uranium dioxide pellets in fuel rod by γ-ray transmission method
EJ/T 686-2005 Measurement method for U enrichment of PWR fuel rod by gamma spectrometry

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Fuel cell testing

GB/T 34015-2017 Recycling of traction battery used in electric vehicle—Test of residual capacity
GB/T 34593-2017 Test methods of hydrogen emission for fuel cell engine
GB/T 35178-2017 Fuel cell electric vehicles—Hydrogen consumption—Test methods
GB/T 33979-2017 Test methods for proton exchange membrane fuel cell power system at subzero environment
GB/T 20935.2-2018 Metal materials—Method of electromagnetic acoustic inspection—Part 2: Standard practice for ultrasonic testing using electromagnetic acoustic transducer (EMAT) techniques
GB/T 20935.3-2018 Metal materials—Method of electromagnetic acoustic inspection—Part 3: Standard practice for ultrasonic surface examinations using electromagnetic acoustic transducer (EMAT) techniques

SAE - SAE International, Fuel cell testing

SAE J2616-2005 Testing Performance of the Fuel Processor Subsystem of an Automotive Fuel Cell System
SAE J2572-2014 Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fueled by Compressed Gaseous Hydrogen
SAE AIR6202-2012 Test Cell Mass Fuel Flow Measurement Using Coriolis Flow Meters

中国民用航空局, Fuel cell testing

MH/T 6117-2018 Detection method of trace elements in aviation fuel

National Metrological Verification Regulations of the People's Republic of China, Fuel cell testing

JJG(船舶) 01-1990 Verification regulations for lead-acid battery electrical performance tester
JJG(交通) 127-2015 Vehicle Fuel Consumption Instrument Based on Carbon Balance Method
JJG(机械) 114-1992 SP-428 Verification Regulations for Electrostatic Photosensitive Material Electrical Performance Tester

Standard Association of Australia （SAA）, Fuel cell testing

IEC 62282-4-102:2022 RLV Fuel cell technologies — Part 4-102: Fuel cell power systems for electrically powered industrial trucks — Performance test methods
IEC 62282-4-102:2022 Fuel cell technologies — Part 4-102: Fuel cell power systems for electrically powered industrial trucks — Performance test methods
AS/NZS 61779.6:2000 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection,installation,use and maintenance of apparatus for the detection and measurement of flammable gases
AS/NZS 61779.1:2000 Electrical apparatus for the detection and measurement of flammable gases Part 1: General requirements and test methods

Military Standard of the People's Republic of China-General Armament Department, Fuel cell testing

GJB 5924-2007 Specincation for dry state tester for reserve batterry for ground to ground missile

Professional Standard - Navy, Fuel cell testing

HJB 449.15-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 15:Fuel and motive force cabin electric function examination
HJB 449.4-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 4:Power supplying battery charger of drilling torpedo
HJB 449.16-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 16:Fuel washing pump
HJB 449.17-2009 Verification regulation for torpedo testing equipments of H/YZQ-006.Part 17:Fuel adding vehicle

Professional Standard - Traffic, Fuel cell testing

JT/T 1013-2015 Vehicle fuel consumption instrument based on carbon balance method

Henan Provincial Standard of the People's Republic of China, Fuel cell testing

DB41/T 971-2014 On-the-spot rapid detection method of ignition type automobile engine fuel

CZ-CSN, Fuel cell testing

CSN 34 5615 Z2-1995

American Society for Testing and Materials (ASTM), Fuel cell testing

ASTM D7112-09 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7493-08 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM UOP864-89 Sulfur in Organic and Inorganic Materials by Combustion and IR Detection
ASTM E453-79(1996)e1 Standard Practice for Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties
ASTM UOP864-12 Sulfur in Organic and Inorganic Materials by Combustion and IR Detection
ASTM E453-79(2001) Standard Practice for Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties
ASTM D7060-12(2014) Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
ASTM D7060-05 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
ASTM D7493-14(2018) Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
ASTM D7112-05 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-05a Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D8004-15 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing
ASTM D7112-18 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-12 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-12(2017) Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7112-19 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
ASTM D7060-12 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
ASTM D4176-21 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-93(1997) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-02 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4176-22 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM F3039-13 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
ASTM D6021-96(2001)e1 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
ASTM D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

AT-OVE/ON, Fuel cell testing

OVE EN 62282-3-201/A1-2021 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (IEC 105/839/CDV) (Amendment) (english version)
OVE EN IEC 62282-4-600:2021 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators (IEC 105/864/CDV) (english version)
OVE EN IEC 62282-8-102:2021 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation ((IEC 62282-8-102:2019) EN

Professional Standard - Agriculture, Fuel cell testing

SN/T 5080-2018 Import and export alkaline and non-acid secondary battery power detection method
水产品质量安全检验手册 9.3.1.0-2005 Chapter IX Fishing Feed Inspection Section 3 Fishing Feed Routine Physical and Chemical Testing Methods 1. Determination of Fluorine in Fishing Feed--Ion Selective Electrode Method (GBT 13083-2002)

Guangdong Provincial Standard of the People's Republic of China, Fuel cell testing

DB4403/T 20-2019 Detection method of electric vehicle on-board lithium-ion power battery system

National Metrological Technical Specifications of the People's Republic of China, Fuel cell testing

JJF 2063-2023 Calibration Specification for Electroluminescence Defect Detection Instruments of Photovoltaic Cells and Modules

U.S. Air Force, Fuel cell testing

AIR FORCE A-A-59603-2004 TESTING KIT, PETROLEUM, FUEL SYSTEM ICING INHIBITOR

Japanese Industrial Standards Committee (JISC), Fuel cell testing

JIS C 8825:2008 Testing and measurement techniques of small polymer electrolyte fuel cell power systems
JIS C 8823:2008 Testing methods for small polymer electrolyte fuel cell power systems
JIS C 8824:2008 Testing methods for environment of small polymer electrolyte fuel cell power systems
JIS R 1761:2016 Testing method for gas permeability of porous ceramics using solid oxide fuel cell
JIS C 8841-3:2011 Small solid oxide fuel cell power systems -- Part 3: Performance testing methods and environment testing methods

YU-JUS, Fuel cell testing

JUS C.X5.032-1990 MagnetIc materials. Hethods of test. Insulation resistance measurement

ZA-SANS, Fuel cell testing

SANS 61430:1997 Secondary cells and batteries - Test methods for checking the performance of devices designed for reducing explosion hazards - Lead-acid starter batteries
SANS 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases

Hunan Provincial Standard of the People's Republic of China, Fuel cell testing

DB43/T 2552-2023 Technical specification for polarization resistance detection of lithium-ion battery boxes for power energy storage
DB43/T 2551-2023 Technical specification for polarized capacitance detection of lithium-ion battery boxes for power energy storage
DB43/T 2550-2023 Technical specifications for ohmic internal resistance detection of lithium-ion battery boxes for power energy storage
DB43/T 2553-2023 Technical specification for constant current charging time detection of lithium-ion battery clusters for power energy storage

KR-KS, Fuel cell testing

KS C IEC TS 62282-7-2-2016 Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC)
KS C IEC 61779-5-2003(2023)
KS C IEC 61779-3-2003(2023)
KS C IEC 61779-4-2003(2023)
KS C IEC 61779-2-2003(2023)
KS C IEC 61779-1-2003(2023)
KS C 6598-2007(2023) Electrical apparatus for the detection of combustible gases in domestic premises－Test methods and performance requirements

Chongqing Provincial Standard of the People's Republic of China, Fuel cell testing

DB50/T 271-2008 Coal-fired power plant desulfurization gypsum CaSO4.2H2O content detection regulations

North Atlantic Treaty Organization Standards Agency, Fuel cell testing

STANAG 7063-2001 METHODS OF DETECTION AND TREATMENT OF FUELS CONTAMINATED BY MICRO- ORGANISMS

RO-ASRO, Fuel cell testing

STAS SR 13204-1994 Non destructive testing. Thermoelectric sorting method of conducting materials

Universal Oil Products Company (UOP), Fuel cell testing

UOP 864-2012 Sulfur in Organic and Inorganic Materials by Combustion and IR Detection

Shandong Provincial Standard of the People's Republic of China, Fuel cell testing

DB37/T 3724-2019 On-site rapid detection method for combustion performance of external wall insulation materials
DB37/T 4097-2020 Durability evaluation method for proton exchange membrane fuel cell stacks for commercial vehicles

BR-ABNT, Fuel cell testing

ABNT MB-490-1972

Taiwan Provincial Standard of the People's Republic of China, Fuel cell testing

CNS 14820-2004 Method of test for measuring toxic gases generated by solid material flammability － Gas detector tube

Qinghai Provincial Standard of the People's Republic of China, Fuel cell testing

DB63/T 1781-2020 Technical specification for detection of recessive defects of crystalline silicon solar cell modules on-site in power stations

Professional Standard - Electricity, Fuel cell testing

DL/T 589-2010 Specification of instrumentation and control for coal fired boiler in fossil fuel power plant
DL/T 589-1996 Directives of thermal instrumentation and control for coal fired boiler in power plant
DL/T 2611-2023
DL/T 1397.1-2014 General specification for DC power system test equipments of electric power system.Part 1: Battery voltage inspection apparatus

Jilin Provincial Standard of the People's Republic of China, Fuel cell testing

DB22/T 2578-2016 Technical specification for detection of lightning protection and anti-static devices in flammable and explosive places

ANSI - American National Standards Institute, Fuel cell testing

N15.23-1979 GUIDE TO THE NONDESTRUCTIVE ASSAY OF 235 U CONTENT OF UNPOISONED LOW-ENRICHMENT URANIUM FUEL RODS (INMM)

BE-NBN, Fuel cell testing

NBN-EN 50054-1993 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods

Jiangsu Provincial Standard of the People's Republic of China, Fuel cell testing

DB32/T 4380-2022 Technical requirements and on-site testing methods for lithium-ion power battery systems of electric vehicles in operation

Jiangxi Provincial Standard of the People's Republic of China, Fuel cell testing

DB36/T 1095-2018 Specifications for preparation of test reports for lightning protection devices in flammable and explosive places

Inner Mongolia Provincial Standard of the People's Republic of China, Fuel cell testing

DB15/T 1819.2-2020 Technical specification for ultrasonic phased array testing of welded joints of buried polyethylene pipelines for gas use Part 2: Testing of electrofusion joints

未注明发布机构, Fuel cell testing

BS EN 50270:2015(2016) Electromagnetic compatibility — Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
BS EN IEC 62282-8-301:2023 Fuel cell technologies Part 8 - 301 : Energy storage systems using fuel cell modules in reverse mode — Power - to - methane energy systems based on solid oxide cells including reversible operation — Performance test methods
BS EN 61779-1:2000(2004) Electrical apparatus for the detection and measurement of flammable gases — Part 1 : General requirements and test methods

CH-SNV, Fuel cell testing

SN ISO 9003:1988 Quality Systems - Model for quality assurance in final inspection and test

IT-UNI, Fuel cell testing

UNI 7604-1976 Examination with electron microscope of metallic materials by the replica technique. Preparation of replicas for microfractography examination.
UNI 7329-1974 Examination with electron microscope of metallic materials by the replica technique. Preparation of replicas for microstructure examination.

Professional Standard - Civil Aviation, Fuel cell testing

MH/T 6068-2010 Standard test method for free water, particulate and other contamination in aviation fuel-Field inspection procedures
MH/T 6068-2017 Standard test method for free water, particulate and other contamination in aviation fuels.Field inspection procedures

IX-IX-IEC, Fuel cell testing

IEC 62282-8-301:2023 Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods

Professional Standard - Commodity Inspection, Fuel cell testing

SN/T 1652-2005 Determination of contaminants in gas turbine and diesel engine fuel for import and export--Rotating disc electrode atomic emission spectrometry method

Professional Standard - Non-ferrous Metal, Fuel cell testing

YS/T 63.2-2023 Carbonaceous materials used for the production of aluminium— Part 2：Determination of electrical resistivity at ambient temperature

VN-TCVN, Fuel cell testing

TCVN 7759-2008 Distillate Fuels.Determination of free water and particulate contamination (Visual inspection procedures)

VE-FONDONORMA, Fuel cell testing

COVENIN 817-1975

CEN - European Committee for Standardization, Fuel cell testing

PREN 17246-2018 Fertilizers - Determination of perchlorate in mineral fertilizers by ion chromatography and conductivity detection (IC-CD)

IPC - Association Connecting Electronics Industries, Fuel cell testing

IPC QL-653A CD-1997 Certification of Facilities That Inspect/Test Printed Boards@ Components and Materials