ZH
RU
ES

Fuel Cell Technology Testing

Fuel Cell Technology Testing, Total:407 items.

In the international standard classification, Fuel Cell Technology Testing involves: Environmental protection, Fuel cells, Road vehicle systems, Railway engineering in general, Electric road vehicles, Internal combustion engines for road vehicles, Wind turbine systems and other alternative sources of energy, Commercial vehicles, Vocabularies, Road vehicles in general, Diagnostic, maintenance and test equipment, Electromagnetic compatibility (EMC), Rectifiers. Convertors. Stabilized power supply, Galvanic cells and batteries, Electrical and electronic testing, Electrical engineering in general, Electrical accessories, Burners. Boilers, Motor cycles and mopeds.

Group Standards of the People's Republic of China, Fuel Cell Technology Testing

T/CAB 0246-2023 General technical specification for hydrogen quality detection for proton exchange membrane fuel cell of mobile laboratory
T/SXS 019-2023 Fuel cell bipolar plate technology
T/SDAS 186-2020 Fule cell rolling stock-Technical specifications for fuel cell cooling system
T/CSAE 276-2022 Fuel cell stack vibration test specification
T/SHDSGY 136-2023 New energy hydrogen fuel cell material technology
T/CEEIA 265-2017 Technical specification of fuel cell fuel system for unmanned aerial vehicle
T/GERS 0006-2021 Technical requirements for gas tightness detection and substitution of onboard hydrogen supply system of fuel cell electric vehicle
T/CEEIA 264-2017 Technical specification of fuel cell power system for unmanned aerial vehicle
T/CEC 463-2021 Hydrogen fuel cell mobile emergency power supply technical conditions
T/CASME 674-2023 Specification for performance test of voltage monitors for fuel cell systems
T/CAB 0109-2021 Fueling Specification for Hydrogen Fuel Cell Vehicles
T/CSTE 0015-2020 Technical specification for hydrogen fuel cell bus maintenance
T/CEEIA 670-2023 Technical requirements of low-conductivity coolant for fuel cell
T/GHDQ 35-2019 Technical conditions of fuel cell electric passenger car in frigid regions
T/ZSA 103-2021 Fuel cell commercial vehicle—Hydrogen system—Technical requirements
T/CAB 0151-2022 Technical requirements for fuel cell power systems for electric two-wheeler vehicles
T/GHDQ 47-2019 Technical conditions of fuel cell stack life test at subzero environment for fuel cell vehicles in frigid regions
T/SDAS 184-2020 Fuel cell rolling stock-Technical specifications for on-board hydrogen system
T/QGCML 1496-2023 Technical specifications for water pump performance testing of fuel cell systems
T/GDBIA 06-2023 Specification for safety testing of ternary cathode materials for lithium-ion batteries
T/CES 063-2021 Technical specification of retired power battery for screening detection
T/GDMES 0042-2023 Technical specification for testing system for high-voltage power batteries
T/CPCIF 0196-2022 Explosion-proof technical specification for hydrogen dispenser of fuel cell vehicle
T/QGCML 1498-2023 Technical specifications for performance testing of air compressors for fuel cell systems
T/QGCML 1497-2023 Technical specifications for performance testing of humidifiers for fuel cell systems
T/GERS 0005-2021 Technical specification for installation of onboard hydrogen system for fuel cell electric vehicles
T/GHDQ 37-2019 Technical conditions of onboard hydrogen system of fuel cell electric vehicles in frigid regions
T/CAAMTB 21-2020 Technical requirements for vibration test of on board hydrogen supply system of fuel cell electric vehicle
T/CPSS 1001-2023 Technical specification of bidirectional AC-DC power module for lithium-based battery test
T/SCAS 04-2023 5G base station battery controller technical requirements and testing specifications
T/SCAS 04-2022 Base station 5G battery controller technical requirements and testing specifications
T/GHDQ 46-2019 Performance requirements and test methods of fuel cell system for electric vehicles in frigid regions
T/GHDQ 39-2019 Technical conditions of vehicle-based fuel cell engine cold-start in frigid regions
T/GHDQ 45-2019 General technical conditions of automotive fuel cell stack subzero character in frigid region
T/SEIA 001-2020 General technical requirements and test method of electric bicycles-cell or battery

British Standards Institution (BSI), Fuel Cell Technology Testing

BS EN 62282-2:2012 Fuel cell technologies. Fuel cell modules
BS EN IEC 62282-2-100:2020 Fuel cell technologies - Fuel cell modules. Safety
BS EN 62282-2:2004 Fuel cell technologies — Part 2: Fuel cell modules
PD IEC/TS 62282-1:2013 Fuel cell technologies. Terminology
BS EN 62282-6-100:2010+A1:2012 Fuel cell technologies. Micro fuel cell power systems. Safety
PD IEC/TS 62282-7-1:2017 Fuel cell technologies. Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC)
BS EN 62282-3-201:2017+A1:2022 Fuel cell technologies - Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
BS EN 62282-3-300:2012 Fuel cell technologies. Stationary fuel cell power systems. Installation
BS EN 62282-3-3:2008 Fuel cell technologies. Stationary fuel cell power systems. Installation
BS EN 62282-5-1:2012 Fuel cell technologies. Portable fuel cell power systems. Safety
BS EN 62282-6-300:2009 Fuel cell technologies - Micro fuel cell power systems - Fuel cartridge interchangeability
BS EN 62282-6-300:2010 Fuel cell technologies - Micro fuel cell power systems - Fuel cartridge interchangeability
BS EN 62282-6-300:2013 Fuel cell technologies. Micro fuel cell power systems. Fuel cartridge interchangeability
BS EN 62282-3-100:2012 Fuel cell technologies. Stationary fuel cell power systems. Safety
BS EN 62282-6-100:2010 Fuel cell technologies - Micro fuel cell power systems - Safety
BS EN 62282-3-1:2007 Fuel cell technologies - Stationary fuel cell power systems - Safety
BS EN 62282-5-1:2007 Fuel cell technologies. Portable fuel cell power systems. Safety
BS PD IEC/TS 62282-7-2:2014 Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
BS EN IEC 62282-7-2:2021 Tracked Changes. Fuel cell technologies. Test methods. Single cell and stack performance tests for solid oxide fuel cells
BS EN 62282-6-200:2012 Fuel cell technologies. Micro fuel cell power systems. Performance test methods
BS EN 62282-6-200:2017 Tracked Changes. Fuel cell technologies. Micro fuel cell power systems. Performance test methods
BS EN IEC 62282-5-100:2018 Tracked Changes. Fuel cell technologies. Portable fuel cell power systems. Safety
BS EN 62282-3-200:2012 Fuel cell technologies. Stationary fuel cell power systems. Performance test methods
BS EN 62282-3-200:2016 Fuel cell technologies. Stationary fuel cell power systems. Performance test methods
BS EN 62282-3-2:2006 Fuel cell technologies - Stationary fuel cell power systems - Performance test methods
BS EN IEC 62282-6-400:2019 Fuel cell technologies - Micro fuel cell power systems. Power and data interchangeability
BS EN IEC 62282-3-100:2020 Tracked Changes. Fuel cell technologies. Stationary fuel cell power systems. Safety
BS PD IEC/TS 62282-7-1:2017 Fuel cell technologies. Test methods. Single cell performance tests for polymer electrolyte fuel cells (PEFC)
BS EN 62282-3-201:2013 Fuel cell technologies. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
BS EN IEC 62282-4-101:2022 Fuel cell technologies - Fuel cell power systems for electrically powered industrial trucks. Safety
18/30363086 DC BS EN 62282-2-100. Fuel cell technologies. Part 2-100. Fuel cell modules. Safety
BS EN 62282-4-102:2017 Fuel cell technologies. Fuel cell power systems for industrial electric trucks. Performance test methods
20/30412786 DC BS EN 62282-7-2. Fuel cell technologies. Part 7-2. Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
23/30470506 DC BS EN IEC 62282-3-201. Fuel cell technologies - Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
20/30422600 DC BS EN 62282-3-201 AMD1. Fuel cell technologies. Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
19/30397959 DC BS EN 62282-3-201 AMD1. Fuel cell technologies. Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
BS EN 62282-6-200:2008 Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
BS DD IEC/PAS 62282-6-150:2011 Fuel cell technologies. Micro fuel cell power systems. Safety. Water reactive (UN Division 4.3) compounds in indirect PEM fuel cells
BS EN IEC 62282-4-102:2023 Tracked Changes. Fuel cell technologies. Fuel cell power systems for electrically powered industrial trucks. Performance test methods
DD IEC/PAS 62282-6-150:2011 Fuel cell technologies - Micro fuel cell power systems. Safety. Water reactive (UN Division 4.3) compounds in indirect PEM fuel cells
23/30470502 DC BS EN IEC 62282-3-200. Fuel cell technologies - Part 3-200. Stationary fuel cell power systems. Performance test methods
16/30354071 DC BS EN 62282-3-100. Fuel cell technologies. Part 3-100. Stationary fuel cell power systems. Safety
BS EN IEC 62282-4-600:2022 Fuel cell technologies - Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell/battery hybrid systems performance test methods for excavators
BS EN IEC 62282-8-201:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems
15/30304561 DC BS EN 62282-3-400. Fuel cell technologies. Part 3-400. Stationary fuel cell power systems. Small stationary fuel cell power system with combined heat and power output
BS EN IEC 62282-8-101:2020 Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
20/30419213 DC BS EN 62282-4-202. Fuel cell technologies. Part 4-202. Fuel Cell Power Systems for unmanned aircraft systems. Performance test methods
20/30422454 DC BS EN IEC 62282-6-101. Fuel cell technologies. Part 6-101. Micro fuel cell power systems. Safety. General requirements
BS EN IEC 62282-8-102:2020 Fuel cell technologies - Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
21/30434916 DC BS EN 62282-4-600. Fuel cell technologies. Part 4-600. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell/battery hybrid power pack systems performance test methods for excavators
21/30440606 DC BS EN 62282-6-401. Fuel cell technologies. Part 6-401. Micro fuel cell power systems. Power and data interchangeability. Performance test methods for laptop computers
22/30445185 DC BS EN 62282-8-201. Fuel cell technologies. Part 8-201. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems
20/30402570 DC BS IEC 62282-4-600. Fuel cell technologies. Part 4-600. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell and battery hybrid power pack systems performance test methods for excavators
18/30352665 DC BS IEC 62282-8-201. Fuel cell technologies. Part 8-201. Energy storage systems using fuel cell modules in reverse mode. Power-to-power systems. Performance.
PD IEC TS 62282-9-102:2021 Fuel cell technologies. Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking. Product category rules for environmental product declarations of stationary fuel cell power systems and alternativ...
PD IEC TS 62282-9-101:2020 Fuel cell technologies. Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking. Streamlined life-cycle considered environmental performance characterization of stationary fuel cell combined heat...
20/30422487 DC BS EN IEC 62282-6-106. Fuel cell technologies. Part 6-106. Micro fuel cell power systems. Safety. Indirect Class 8 (corrosive) compounds
20/30422491 DC BS EN IEC 62282-6-107. Fuel cell technologies. Part 6-107. Micro fuel cell power systems. Safety. Indirect water-reactive (Division 4.3) compounds
18/30352664 DC BS IEC 62282-8-102. Fuel cell technologies. Part 8-102. Energy storage systems using fuel cell modules in reverse mode. Test procedures for proton exchange membrane single cell and stack performance including reversing operation
17/30352625 DC BS IEC 62282-8-101. Fuel cell technologies. Part 8-101. Energy storage systems using fuel cell modules in reverse mode. Test procedures for solid oxide single cell and stack performance including reversing operation
BS EN 62282-4-101:2014 Fuel cell technologies. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
21/30440998 DC BS EN IEC 62282-4-102. Fuel cell technologies. Part 4-102. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell power systems for electrically powered industrial trucks. Performance test methods
BS PD IEC TS 62282-9-102:2021 Fuel cell technologies. Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking. Product category rules for environmental product declarations of stationary fuel cell power systems and alternative s
20/30430736 DC BS EN IEC 62282-4-101. Fuel cell technologies. Part 4-101. Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Fuel cell power systems for electrically powered industrial trucks. Safety
21/30433542 DC BS EN 62282-8-301. Fuel cell technologies. Part 8-301. Energy storage systems using fuel cell modules in reverse mode. Power to methane energy systems based on solid oxide cells including reversible operation. Performance test methods

Korean Agency for Technology and Standards (KATS), Fuel Cell Technology Testing

KS C IEC 62282-2:2013 Fuel cell technologies-Part 2:Fuel cell modules
KS C IEC 62282-2:2006 Fuel cell technologies-Part 2:Fuel cell module
KS C IEC 62282-2-2013(2018) Fuel cell technologies－Part 2：Fuel cell modules
KS C IEC 62282-7-1:2013 FUEL CELL TECHNOLOGIES – Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
KS C IEC 62282-3-200-2014(2019) Fuel cell technologies — Part 3-200: Stationary fuel cell power systems — Performance test methods
KS C IEC 62282-6-200-2014(2019) Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
KS C IEC TS 62282-7-2:2016 Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC)
KS C IEC 62282-1:2006 Fuel cell technologies-Part 1:Terminology
KS C IEC TS 62282-1:2014 Fuel Cell Technologies — Part 2: Terminology
KS C IEC TS 62282-1-2014(2019) Fuel Cell Technologies — Part 2: Terminology
KS C IEC 62282-3-100-2014(2019) Fuel cell technologies — Part 3-100: Stationary fuel cell power systems — Safety
KS C IEC 62282-7-1-2013(2018) FUEL CELL TECHNOLOGIES – Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
KS C IEC 62282-3-200:2014 Fuel cell technologies — Part 3-200: Stationary fuel cell power systems — Performance test methods
KS C IEC 62282-3-100:2014 Fuel cell technologies — Part 3-100: Stationary fuel cell power systems — Safety
KS C IEC 62282-3-300:2014 Fuel cell technologies — Part 3-300: Stationary fuel cell power systems — Installation
KS C IEC 62282-3-201:2014 Fuel cell technologies — Part 3-201: Stationary fuel cell power sytems — Performance test methods for small fuel cell power systems
KS C IEC 62282-3-201-2014(2019) Fuel cell technologies — Part 3-201: Stationary fuel cell power sytems — Performance test methods for small fuel cell power systems
KS C IEC TS 62282-7-2-2016(2021) Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC)
KS C IEC 62282-5-1-2015(2020) Fuel cell technologies－Part 5-1：Portable fuel cell appliances－ Safety and performance requirement
KS C IEC 62282-3-300-2014(2019) Fuel cell technologies — Part 3-300: Stationary fuel cell power systems — Installation
KS C IEC 60050-485:2021 International Electrotechnical Vocabulary(IEV) —Part 485: Fuel cell technologies
KS C IEC 62282-4-101:2016 Fuel cell technologies — Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units(APU) — Safety of electrically powered industrial trucks

Association Francaise de Normalisation, Fuel Cell Technology Testing

NF C56-282-2:2005 Fuel cell technologies - Part 2 : fuel cell modules.
NF C56-282-2/A1:2007 Fuel cell technologies - Part 2 : fuel cell modules.
NF C56-282-2*NF EN 62282-2:2012 Fuel cell technologies - Part 2: fuel cell modules
NF C56-282-2-100*NF EN IEC 62282-2-100:2020 Fuel cell technologies - Part 2-100 : fuel cell modules - Safety
NF EN IEC 62282-2-100:2020 Technologies des piles à combustible - Partie 2-100 : modules à piles à combustible - Sécurité
NF EN 62282-6-200:2017 Technologies des piles à combustibles - Partie 6-200 : Systèmes à micro-piles à combustible - Méthodes d'essai des performances
NF EN 15502-2-1/IN1:2017 Technologies des piles à combustibles - Partie 6-200 : Systèmes à micro-piles à combustible - Méthodes d'essai des performances
NF C56-282-6-200:2008 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods.
NF C56-282-6-200:2012 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods
NF EN 62282-6-100/A1:2012 Technologies des piles à combustible - Partie 6-100 : système à micro-piles à combustible - Sécurité
NF EN 62282-6-100:2010 Technologies des piles à combustible - Partie 6-1 : systèmes à micro-piles à combustible - Sécurité
NF EN 62282-3-200:2016 Technologies des piles à combustible - Partie 3-200 : systèmes à piles à combustible stationnaires - Méthodes d'essai des performances
NF C56-282-5-1:2007 Fuel cell technologies - Part 5-1 : portable fuel cell power systems - Safety.
NF EN IEC 62282-5-100:2018 Technologies des piles à combustible Partie 5-100 : systèmes à piles à combustible portables - Sécurité
NF EN IEC 62282-3-100:2020 Technologies des piles à combustible - Partie 3-100 : systèmes à piles à combustible stationnaires - Sécurité
NF C56-282-6-200*NF EN 62282-6-200:2017 Fuel cell technologies - Part 6-200 : micro fuel cell power systems - Performance test methods
NF C56-282-6-300:2010 Fuel cell technologies - Part 6-300 : micro fuel cell power systems - Fuel cartridge interchangeability.
NF C56-282-6-300*NF EN 62282-6-300:2013 Fuel cell technologies - Part 6-300 : micro fuel cell power systems - Fuel catridge interchangeability
NF C56-282-1:2005 Fuel cell technologies - Part 1 : terminology.
NF C56-282-7-2*NF EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2 : test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
NF C56-282-5-100*NF EN IEC 62282-5-100:2018 Fuel cell technologies - Part 5-100 : portable fuel cell power systems - Safety
NF C56-282-3-201/A1*NF EN 62282-3-201/A1:2022 Fuel cell technologies - Part 3-201 : stationary fuel cell power systems - Performance test methods for small fuel cell power systems
NF C56-282-3-201*NF EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
NF C56-282-3-3:2008 Fuel cell technologies - Part 3-3 : stationary fuel cell power systems - Installation.
NF C56-282-3-300*NF EN 62282-3-300:2012 Fuel cell technologies - Part 3-300 : stationary fuel cell power systems - Installation
NF C56-282-6-100*NF EN 62282-6-100:2010 Fuel cell technologies - Part 6-1 : micro fuel cell power systems - Safety
NF C56-282-6-100/A1*NF EN 62282-6-100/A1:2012 Fuel cell technologies - Part 6-100 : micro fuel cell power systems - Safety
NF C56-282-3-200*NF EN 62282-3-200:2016 Fuel cell technologies - Part 3-200 : stationary fuel cell power systems - Performance test methods
NF C56-282-3-1:2007 Fuel cell technologies - Part 3-1 : stationary fuel cell power systems - Safety.
NF C56-282-3-100*NF EN IEC 62282-3-100:2020 Fuel cell technologies - Part 3-100 : stationary fuel cell power systems - Safety
NF C56-282-3-100*NF EN 62282-3-100:2016 Fuel cell technologies - Part 3-100: stationary fuel cell power systems - Safety
NF EN IEC 62282-4-101:2022 Technologies des piles à combustible - Partie 4-101 : Systèmes à pile à combustible pour chariots de manutention électriques - Sécurité
NF C56-282-4-102*NF EN 62282-4-102:2017 Fuel cell technologies - Part 4-102 : fuel cell power systems for industrial electric trucks - Performance test methods
NF C56-282-3-200:2012 Fuel cell technologies - Part 3-200 : stationary fuel cell power systems -Performance test methods.
NF EN IEC 62282-6-400:2019 Technologies des piles à combustible - Partie 6-400 : systèmes à micropiles à combustible - Interchangeabilité de la puissance et des données
NF C56-282-6-400*NF EN IEC 62282-6-400:2019 Fuel cell technologies - Part 6-400 : micro fuel cell power systems - Power and data interchangeability
NF C56-282-3-201:2013 Fuel cell technologies - Part 3-201 : stationary fuel cell power systems - Performance test methods for small fuel cell power systems
NF EN IEC 62282-8-201:2020 Technologies des piles à combustible - Partie 8 201 : systèmes de stockage de l'énergie utilisant des modules à piles à combustible en mode inversé - Procédures d'essai pour la performance des systèmes électriques à électriques
NF C56-282-8-101*NF EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101 : energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
NF C56-282-8-201*NF EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
NF C56-282-8-102*NF EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102 : energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
NF C56-282-4-101*NF EN 62282-4-101:2015 Fuel cell technologies - Part 4-101 : fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industriel trucks

International Electrotechnical Commission (IEC), Fuel Cell Technology Testing

IEC 62282-2:2007 Fuel cell technologies - Part 2: Fuel cell modules
IEC 62282-2:2004 Fuel cell technologies - Part 2: Fuel cell modules
IEC 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
IEC 105/429/CD:2012 IEC 62282-7-2: Fuel cell technologies - Part 7-2: Single cell/stack performance test methods for solid oxide fuel cells (SOFC)
IEC TS 62282-7-1:2017 Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC)
IEC 105/241/DTS:2009 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
IEC TS 62282-7-1:2010 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
IEC 62282-2/AMD1:2007 Fuel cell technologies - Part 2: Fuel cell modules; Amendment 1
IEC 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
IEC 62282-3-200:2015 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
IEC 62282-6-200:2016 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
IEC PAS 62282-6-1:2006 Fuel cell technologies - Part 6-1: Micro fuel cell systems - Safety
IEC 62282-5-1:2007 Fuel cell technologies - Part 5-1: Portable fuel cell appliances - Safety
IEC 62282-6-200:2007 Fuel cell technologies - Part 6-2: Micro fuel cell power systems - Performance test methods
IEC 62282-6-200:2012 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
IEC 105/178/CD:2008 Fuel cell technologies - Part 1: Terminology
IEC TS 62282-1:2005 Fuel cell technologies - Part 1: Terminology
IEC 62282-1:2010 Fuel cell technologies – Part 1: Terminology
IEC TS 62282-1:2010 Fuel cell technologies - Part 1: Terminology
IEC TS 62282-1:2013 Fuel cell technologies.Part 1: Terminology
IEC 62282-3-100:2019 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
IEC 62282-3-3:2007 Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation
IEC 62282-3-300:2012 Fuel cell technologies - Part 3-300: Stationary fuel cell powersystems - Installation
IEC 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
IEC 62282-5-100:2018 Fuel cell technologies - Part 5-100: Portable fuel cell power systems - Safety
IEC 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
IEC 62282-3-1:2007 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
IEC 62282-6-300:2009 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
IEC 62282-6-300:2012 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
IEC PAS 62282-6-1/COR1:2007 Fuel cell technologies - Part 6-1: Micro fuel cell power systems - Safety; Corrigendum 1
IEC 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
IEC 62282-6-100:2010/AMD1:2012 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
IEC 62282-6-100:2010 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
IEC 62282-6-100:2010+AMD1:2012 CSV Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
IEC 62282-6-100:2012 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
IEC 62282-3-100:2019 RLV Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
IEC 62282-6-100:2010/COR1:2011 Corrigendum 1 - Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
IEC 62282-3-201:2017+AMD1:2022 CSV Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
IEC 62282-4-101:2022 RLV Fuel cell technologies - Part 4-101: Fuel cell power systems for electrically powered industrial trucks - Safety
IEC 62282-4-101:2022 Fuel cell technologies - Part 4-101: Fuel cell power systems for electrically powered industrial trucks - Safety
IEC 62282-3-400:2016 Fuel cell technologies - Part 3-400: Stationary fuel cell power systems - Small stationary fuel cell power system with combined heat and power output
IEC 62282-3-2:2006 Fuel cell technologies - Part 3-2: Stationary fuel cell power plants - Performance test methods
IEC 105/450/DTS:2013 IEC/TS 62282-1: Fuel cell technologies - Part 1: Terminology
IEC 60050-485:2020 International Electrotechnical Vocabulary (IEV) - Part 485: Fuel cell technologies
IEC 62282-3-201:2017/AMD1:2022 Amendment 1 - Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
IEC PAS 62282-6-150:2011 Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN devision 4.3) compounds in indirect PEM fuell cells
IEC 62282-6-400:2019 Fuel cell technologies - Part 6-400: Micro fuel cell power systems - Power and data interchangeability
IEC 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods
IEC 105/187/CD:2008 IEC 62282-7-1 TS, Ed. 1: Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
IEC TS 62282-7-2:2014 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance test methods for solid oxide fuel cells (SOFC)
IEC 105/443/DTS:2013 IEC/TS 62282-7-2: Fuel cell technologies - Part 7-2: Single cell/stack performance test methods for solid oxide fuel cells (SOFC)
IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
IEC 105/200/DTS:2008 IEC/TS 62282-1, Ed. 2: Fuel cell technologies - Part 1: Terminology
IEC 105/309/DPAS:2010 IEC/PAS 62282-6-150: Fuel cell technologies - Part 6-150: Micro fuel cell power systems - Safety - Water reactive (UN devision 4.3) compounds in indirect PEM fuell cells
IEC 62282-4-600:2022 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for exc
IEC 62282-4-202:2023 Fuel cell technologies - Part 4-202: Fuel cell power systems for propulsion and auxiliary power units - Unmanned aircrafts - Performance test methods
IEC 62282-8-102:2019 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membrane, incl
IEC TS 62282-9-101:2020 Fuel cell technologies - Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Streamlined life-cycle considered environmental
IEC 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
IEC TS 62282-9-102:2021 Fuel cell technologies - Part 9-102: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking - Product category rules for environmental product

Danish Standards Foundation, Fuel Cell Technology Testing

DS/EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
DS/IEC/TS 62282-7-1:2012 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
DS/EN 62282-6-200:2013 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
DS/IEC/TS 62282-1:2010 Fuel cell technologies - Part 1: Terminology
DS/EN IEC 62282-7-2:2021 Fuel cell technologies – Part 7-2: Test methods – Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
DS/EN 62282-6-300:2010 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
DS/EN 62282-6-300:2013 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
DS/EN 62282-3-300:2013 Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation
DS/EN 62282-5-1:2013 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
DS/EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
DS/EN 62282-6-100:2010 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
DS/EN 62282-6-100/A1:2013 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
DS/EN 62282-3-200:2012 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
DS/EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
DS/IEC TS 62282-9-101:2020 Fuel cell technologies – Part 9-101: Evaluation methodology for the environmental performance of fuel cell power systems based on life cycle thinking – Streamlined life-cycle considered environmental performance characterization of stationary fuel cell co

AENOR, Fuel Cell Technology Testing

UNE-EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
UNE-EN 62282-6-200:2013 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
UNE-IEC/TS 62282-1:2013 Fuel cell technologies - Part 1: Terminology
UNE-EN 62282-6-300:2013 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
UNE-EN 62282-5-1:2013 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
UNE-EN 62282-3-300:2013 Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation
UNE-EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
UNE-EN 62282-3-200:2012 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
UNE-EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety

CENELEC - European Committee for Electrotechnical Standardization, Fuel Cell Technology Testing

EN 62282-2:2012 Fuel cell technologies - Part 2: Fuel cell modules
EN 62282-6-200:2008 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
EN 62282-5-1:2007 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
EN 62282-3-300:2012 Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation
EN 62282-2:2004 Fuel cell technologies Part 2: Fuel cell modules (Incorporates Amendment A1: 2007)
EN 62282-3-2:2006 Fuel cell technologies Part 3-2: Stationary fuel cell power systems - Performance test methods
EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
EN 62282-3-1:2007 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
EN IEC 62282-6-400:2019 Fuel cell technologies - Part 6-400: Micro fuel cell power systems - Power and data interchangeability

RU-GOST R, Fuel Cell Technology Testing

GOST R IEC 62282-2-2014 Fuel cell technologies. Part 2. Fuel cell modules
GOST IEC/TS 62282-7-1-2016 Fuel cell technologies. Part 7-1. Single cell test methods for polymer electrolyte fuel cell
GOST R 56188.1-2014 Fuel Cell Technologies. Part 1. Terminology
GOST IEC 62282-3-300-2015 Fuel cell technologies. Part 3-300. Stationary fuel cell power systems. Installation
GOST R IEC 62282-3-100-2014 Fuel cell technologies. Part 3-100. Stationary fuel cell power systems. Safety
GOST IEC 62282-5-1-2015 Fuel cell technologies. Part 5-1. Portable fuel cell power systems. Safety
GOST IEC 62282-3-201-2015 Fuel cell technologies. Part 3-201. Stationary fuel cell power systems. Performance test methods for small fuel cell power systems
GOST R IEC 62282-3-200-2014 Fuel cell technologies. Part 3-200. Stationary fuel cell power systems. Performance test method

German Institute for Standardization, Fuel Cell Technology Testing

DIN EN 62282-2:2008 Fuel cell technologies - Part 2: Fuel cell modules (IEC 62282-2:2004 + A1:2007); German version EN 62282-2:2004 + A1:2007
DIN IEC/TS 62282-7-1:2017 Fuel cell technologies - Part 7-1: Test methods - Single cell performance tests for polymer electrolyte fuel cells (PEFC) (IEC/TS 62282-7-1:2017)
DIN EN 62282-3-3:2008 Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation (IEC 62282-3-3:2007); German version EN 62282-3-3:2008
DIN IEC/TS 62282-7-2:2011 Fuel cell technologies - Part 7-2: Single cell/stack-performance test methods for solid oxide fuel cells (SOFC) (IEC 105/322/NP:2011)
DIN IEC/TS 62282-7-2:2015 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFC) (IEC/TS 62282-7-2:2014)
DIN EN 62282-6-200:2008 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2007); German version EN 62282-6-200:2008
DIN EN 62282-5-1:2008 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety (IEC 62282-5-1:2007); German version EN 62282-5-1:2007
DIN EN 62282-3-1:2008 Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety (IEC 62282-3-1:2007); German version EN 62282-3-1:2007
DIN EN 62282-2:2013 Fuel cell technologies - Part 2: Fuel cell modules (IEC 62282-2:2012); German version EN 62282-2:2012
DIN IEC/TS 62282-7-1:2012 Fuel cell technologies - Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC) (IEC/TS 62282-7-1:2010)
DIN IEC/TS 62282-1:2015 Fuel cell technologies - Part 1: Terminology (IEC/TS 62282-1:2013)
DIN IEC/TS 62282-1:2011 Fuel cell technologies - Part 1: Terminology (IEC/TS 62282-1:2010)
DIN EN 62282-3-201:2014 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (IEC 62282-3-201:2013); German version EN 62282-3-201:2013
DIN EN IEC 62282-2-100:2021 Fuel cell technologies - Part 2-100: Fuel cell modules - Safety (IEC 62282-2-100:2020); German version EN IEC 62282-2-100:2020
DIN EN 62282-3-300:2013 Fuel cell technologies - Part 3-300: Stationary fuel cell power system - Installation (IEC 62282-3-300:2012); German version EN 62282-3-300:2012
DIN EN 62282-6-300:2014 Fuel cell technologies.Part 6-300: Micro fuel cell power systems.Fuel cartridge interchangeability (IEC 62282-6-300:2012); German version EN 62282-6-300:2013
DIN EN 62282-6-300:2010 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability (IEC 62282-6-300:2009); German version EN 62282-6-300:2009
DIN EN 62282-5-1:2013 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety (IEC 62282-5-1:2012); German version EN 62282-5-1:2012
DIN EN 62282-6-200:2013 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2012); German version EN 62282-6-200:2012
DIN EN 62282-3-100:2012 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety (IEC 62282-3-100:2012); German version EN 62282-3-100:2012
DIN EN 62282-6-100:2012 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010 + Cor.:2011); German version EN 62282-6-100:2010
DIN EN 62282-6-100/A1:2013 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010/A1:2012); German version EN 62282-6-100:2010/A1:2012
DIN EN IEC 62282-8-102:2021 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation (IEC 62282-8-102:2019); Ger

国家质量监督检验检疫总局, Fuel Cell Technology Testing

SN/T 4444-2016 Technical requirements for inspection of imported and exported fuel cells Safety of portable fuel cell power generation systems

Canadian Standards Association (CSA), Fuel Cell Technology Testing

CAN/CSA-C22.2 NO.62282-2-2007 Fuel cell technologies – Part 2: Fuel cell modules (First Edition)
CSA ANSI FC 1/CSA C22.2 No. 62282-3-100-2021 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
CAN/CSA-C22.2 NO.62282-3-100-2015 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety (First Edition)

European Committee for Electrotechnical Standardization（CENELEC）, Fuel Cell Technology Testing

EN IEC 62282-2-100:2020 Fuel cell technologies - Part 2-100: Fuel cell modules - Safety
EN 62282-6-200:2012 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
EN 62282-6-200:2017 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs)
EN 62282-5-1:2012 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
EN IEC 62282-5-100:2018 Fuel cell technologies - Part 5-100: Portable fuel cell power systems - Safety
EN 62282-3-201:2013 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems
EN 62282-6-300:2009 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
EN 62282-6-300:2013 Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
EN 62282-6-100:2010 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety
EN IEC 62282-3-100:2020 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
EN IEC 62282-4-102:2023 Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods
EN 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods
EN 62282-3-200:2016 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
FprEN 62282-3-400:2022 Fuel cell technologies - Part 3-400: Stationary fuel cell power systems - Small stationary fuel cell power system with combined heat and power output
EN IEC 62282-4-600:2022 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators
EN 62282-3-200:2012 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation
EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems
EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation
EN IEC 62282-8-301:2023 Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods
EN 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks

ES-UNE, Fuel Cell Technology Testing

UNE-EN IEC 61010-2-010:2020 Fuel cell technologies - Part 2-100: Fuel cell modules - Safety (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN IEC 62282-2-100:2020 Fuel cell technologies - Part 2-100: Fuel cell modules - Safety (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN 62282-3-201:2017/A1:2022 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (Endorsed by Asociación Española de Normalización in April of 2022.)
UNE-EN 62282-3-201:2017 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (Endorsed by Asociación Española de Normalización in December of 2017.)
UNE-EN 62282-6-100:2010 Fuel cell technologies -- Part 6-100: Micro fuel cell power system - Safety (Endorsed by AENOR in January of 2011.)
UNE-EN 62282-3-200:2016 Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods (Endorsed by AENOR in April of 2016.)
UNE-EN 62282-6-200:2017 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (Endorsed by Asociación Española de Normalización in March of 2017.)
UNE-EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs) (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-EN IEC 62282-5-100:2018 Fuel cell technologies - Part 5-100: Portable fuel cell power systems - Safety (Endorsed by Asociación Española de Normalización in September of 2018.)
UNE-EN IEC 62282-3-100:2020 Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety (Endorsed by Asociación Española de Normalización in May of 2020.)
UNE-EN 62282-6-100:2010/A1:2012 Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety (Endorsed by AENOR in January of 2013.)
UNE-EN 62282-4-102:2017 Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods (Endorsed by Asociación Española de Normalización in August of 2017.)
UNE-EN IEC 62282-4-102:2023 Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods (Endorsed by Asociación Española de Normalización in March of 2023.)
UNE-EN IEC 62282-4-101:2022 Fuel cell technologies - Part 4-101: Fuel cell power systems for electrically powered industrial trucks - Safety (Endorsed by Asociación Española de Normalización in October of 2022.)
UNE-EN IEC 62282-6-400:2019 Fuel cell technologies - Part 6-400: Micro fuel cell power systems - Power and data interchangeability (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-IEC 60050-485:2021 International Electrotechnical Vocabulary (IEV) - Part 485: Fuel cell technologies
UNE-EN IEC 62282-8-201:2020 Fuel cell technologies - Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems (Endorsed by Asociación Española de Normalización in April of 2020.)
UNE-EN IEC 62282-8-102:2020 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation (Endorsed by Asociación...
UNE-EN IEC 62282-8-101:2020 Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation (Endorsed by Asociación Española de Norma...
UNE-EN IEC 62282-4-600:2022 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators (Endorsed by Asociación Española de Normal...
UNE-EN 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks (Endorsed by AENOR in December of 2014.)

Lithuanian Standards Office , Fuel Cell Technology Testing

LST EN 62282-2-2005 Fuel cell technologies. Part 2: Fuel cell modules (IEC 62282-2:2004)
LST EN 62282-2-2012 Fuel cell technologies -- Part 2: Fuel cell modules (IEC 62282-2:2012)
LST EN 62282-2-2005/A1-2007 Fuel cell technologies - Part 2: Fuel cell modules (IEC 62282-2:2004/A1:2007)
LST EN 62282-3-300-2012 Fuel cell technologies -- Part 3-300: Stationary fuel cell power systems - Installation
LST EN IEC 62282-7-2:2021 Fuel cell technologies - Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs) (IEC 62282-7-2:2021)
LST EN 62282-6-300-2010 Fuel cell technologies -- Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability (IEC 62282-6-300:2009)
LST EN 62282-6-200-2008 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2007)
LST EN 62282-6-200-2013 Fuel cell technologies -- Part 6-200: Micro fuel cell power systems - Performance test methods (IEC 62282-6-200:2012)
LST EN 62282-3-3-2008 Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation (IEC 62282-3-3:2007)
LST EN 62282-3-200-2012 Fuel cell technologies -- Part 3-200: Stationary fuel cell power systems - Performance test methods (IEC 62282-3-200:2011)
LST EN 62282-5-1-2007 Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety (IEC 62282-5-1:2007)
LST EN 62282-6-100-2010 Fuel cell technologies -- Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010)
LST EN 62282-3-100-2012 Fuel cell technologies -- Part 3-100: Stationary fuel cell power systems - Safety (IEC 62282-3-100:2012)
LST EN 62282-5-1-2013 Fuel cell technologies -- Part 5-1: Portable fuel cell power systems - Safety (IEC 62282-5-1:2012)
LST EN 62282-6-100-2010/A1-2013 Fuel cell technologies -- Part 6-100: Micro fuel cell power systems - Safety (IEC 62282-6-100:2010/A1:2012)

IEC - International Electrotechnical Commission, Fuel Cell Technology Testing

TS 62282-7-1-2010 Fuel cell technologies – Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC) (Edition 1.0)
PAS 62282-6-1-2006 Fuel cell technologies – Part 6-1: Micro fuel cell power systems – Safety (Edition 1.0)
PAS 62282-6-1 CORR 1-2007 Fuel cell technologies – Part 6-1: Micro fuel cell power systems – Safety (Edition 1.0)

Taiwan Provincial Standard of the People's Republic of China, Fuel Cell Technology Testing

CNS 15026-1-2006 Fuel cell technologies - Part 1: Terminology

European Committee for Standardization (CEN), Fuel Cell Technology Testing

CENELEC EN 62282-6-200-2008 Fuel cell technologies — Part 6-200: Micro fuel cell power systems — Performance test methods
EN 62282-3-3:2008 Fuel cell technologies — Part 3-3: Stationary fuel cell power systems — Installation

交通运输部, Fuel Cell Technology Testing

JT/T 1342-2020 Technical Specifications for Fuel Cell Buses

ZA-SANS, Fuel Cell Technology Testing

SANS 62282-3-3:2008 Fuel cell technologies Part 3-3: Stationary fuel cell power systems - Installation

Standard Association of Australia （SAA）, Fuel Cell Technology Testing

IEC 62282-4-102:2022 RLV Fuel cell technologies — Part 4-102: Fuel cell power systems for electrically powered industrial trucks — Performance test methods
IEC 62282-4-102:2022 Fuel cell technologies — Part 4-102: Fuel cell power systems for electrically powered industrial trucks — Performance test methods
AS 62282.2.100:2022 Fuel cell technologies, Part 2.100: Fuel cell modules — Safety (IEC 62282-2-100:2020 (ED.1.0) MOD)
AS 62282.3.300:2021 Fuel cell technologies, Part 3.300: Stationary fuel cell power systems — Installation (IEC 62282-3-300:2012 (ED.1.0), MOD)
AS 62282.3.100:2021 Fuel cell technologies, Part 3.100: Stationary fuel cell power systems — Safety (IEC 62282-3-100:2019 (ED.2.0), MOD)

PL-PKN, Fuel Cell Technology Testing

PN-EN IEC 62282-2-100-2021-02 E Fuel cell technologies - Part 2-100: Fuel cell modules - Safety (IEC 62282-2-100:2020)
PN-EN IEC 62282-8-101-2020-11 E Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible operation (IEC 62282-8-101:2020)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fuel Cell Technology Testing

GB/T 20042.2-2008 Proton exchange membrane fuel cell.General technical specification of fud cell stacks
GB/T 25319-2010 Fuel cell power system used for motor vehicles.Technical specification
GB/T 42855-2023 Hydrogen Fuel Cell Vehicle Refueling Protocol Technical Requirements
GB/T 20042.2-2023 Proton Exchange Membrane Fuel Cells Part 2: General Specifications for Cell Stacks
GB/T 29123-2012 Specifications for hydrogen fuel cell vehicles in demonstration
GB/T 26990-2011 Fuel cell electric vehicles.Onboard hydrogen system.Specifications
GB/T 23646-2009 Fuel cell powder system for electric bicycles.Technical specification
GB/T 31037.2-2014 Fuel cell power system used for industrial lift truck applications.Part 2:technical specification

Guangdong Provincial Standard of the People's Republic of China, Fuel Cell Technology Testing

DB44/T 1486-2014 General technical requirements for fuel cell electric buses

AT-OVE/ON, Fuel Cell Technology Testing

OVE EN 62282-3-201/A1-2021 Fuel cell technologies - Part 3-201: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems (IEC 105/839/CDV) (Amendment) (english version)
OVE EN IEC 62282-2-100:2021 Fuel cell technologies - Part 2-100: Fuel cell modules - Safety ((IEC 62282-2-100:2020) EN IEC 62282-2-100:2020) (german version)
OVE EN IEC 62282-4-600:2021 Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators (IEC 105/864/CDV) (english version)
OVE EN IEC 62282-8-102:2021 Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, including reversible operation ((IEC 62282-8-102:2019) EN

KR-KS, Fuel Cell Technology Testing

KS C IEC 62282-6-400-2023 Fuel cell technologies — Part 6-400: Micro fuel cell power systems — Power and data interchangeability
KS C IEC 62282-4-102-2023 Fuel cell technologies — Part 4-102: Fuel cell power systems for industrial electric trucks — Performance test methods
KS C IEC 60050-485-2021 International Electrotechnical Vocabulary(IEV) —Part 485: Fuel cell technologies
KS C IEC TS 62282-7-2-2016 Fuel cell technologies ― Part 7-2: Test methods ― Single cell and stack performance tests for solid oxide fuel cells(SOFC)
KS C IEC 62282-8-102-2023 Fuel cell technologies — Part 8-102: Energy storage systems using fuel cell modules in reverse mode — Test procedures for the performance of single cells and stacks with proton exchange membranes, inc
KS R ISO 23273-3-2008 Fuel cell road vehicles－Safety specifications－Part 3：Protection of persons against electric shock
KS C IEC 62282-4-101-2016 Fuel cell technologies — Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units(APU) — Safety of electrically powered industrial trucks

American National Standards Institute （ANSI), Fuel Cell Technology Testing

ANSI/CSA 62282-3-100-2013 Fuel Cell Technologies - Part 3: Stationary Fuel Cell Power Systems - Safety

Japanese Industrial Standards Committee (JISC), Fuel Cell Technology Testing

JIS C 8825:2008 Testing and measurement techniques of small polymer electrolyte fuel cell power systems
JIS C 62282-4-102:2021 Fuel cell technologies -- Part 4-102: Fuel cell power systems for electrically powered industrial trucks -- Performance test methods

Underwriters Laboratories (UL), Fuel Cell Technology Testing

UL SUBJECT 2265A-2018 UL Outline for Investigation Micro Fuel Cell Power Systems Using Direct Methanol Fuel Cell Technology (Issue 2)

Shandong Provincial Standard of the People's Republic of China, Fuel Cell Technology Testing

DB37/T 4100-2020 Technical Requirements for Proton Exchange Membrane Fuel Cell Coolant
DB37/T 4098-2020 Safety Technical Requirements for Proton Exchange Membrane Fuel Cell Engines

工业和信息化部, Fuel Cell Technology Testing

YD/T 3425-2018 Technical requirements for maintenance of hydrogen fuel cell power supply system for communications

Society of Automotive Engineers (SAE), Fuel Cell Technology Testing

SAE J2579-2009 Technical Information Report for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles

SAE - SAE International, Fuel Cell Technology Testing

SAE T-114-2003 Fuel Cell Powered Vehicles Automotive Technology of the Future-Update

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Fuel Cell Technology Testing

GB/T 34872-2017 Technical requirement of hydrogen supply system for proton exchange membrane fuel cells

Professional Standard - Energy, Fuel Cell Technology Testing

NB/T 10671-2021 General Safety Technical Guidelines for Solid Oxide Fuel Cell Modules

GOSTR, Fuel Cell Technology Testing

GOST R 58988-2020 Unmanned aircraft systems. Fuel cell technologies in air transport. Terms and definitions

HU-MSZT, Fuel Cell Technology Testing

Hunan Provincial Standard of the People's Republic of China, Fuel Cell Technology Testing

DB43/T 2552-2023 Technical specification for polarization resistance detection of lithium-ion battery boxes for power energy storage
DB43/T 2551-2023 Technical specification for polarized capacitance detection of lithium-ion battery boxes for power energy storage
DB43/T 2550-2023 Technical specifications for ohmic internal resistance detection of lithium-ion battery boxes for power energy storage

JP-JEM, Fuel Cell Technology Testing

JEM 1495-2011 The safety and technical standard and validation method for small fuel cell systems built in apartments

IX-IX-IEC, Fuel Cell Technology Testing

IEC 62282-8-301:2023 Fuel cell technologies - Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test methods

未注明发布机构, Fuel Cell Technology Testing

BS EN IEC 62282-8-301:2023 Fuel cell technologies Part 8 - 301 : Energy storage systems using fuel cell modules in reverse mode — Power - to - methane energy systems based on solid oxide cells including reversible operation — Performance test methods