ZH
RU
ES

Conditions for vibration testing

Conditions for vibration testing, Total:498 items.

In the international standard classification, Conditions for vibration testing involves: Vibrations, shock and vibration measurements, Hydraulic energy engineering, Aerospace electric equipment and systems, Telecontrol. Telemetering, Industrial automation systems, Bearings, Vibration and shock with respect to human beings, Fasteners for aerospace construction, Mechanical testing, Industrial trucks, Road vehicle systems, Mining equipment, Piezoelectric and dielectric devices, Shipbuilding and marine structures in general, Gears, Acoustics and acoustic measurements, Semiconductor devices, Fishing and fish breeding, Materials for aerospace construction, Environmental testing, Protective equipment, Packaging materials and accessories, Fibre optic communications, Aircraft and space vehicles in general, Rubber, Hand-held tools, Protection of and in buildings, Railway rolling stock, Integrated circuits. Microelectronics, Construction materials, Sewing machines and other equipment for the clothing industry, Electrical accessories, Pipeline components and pipelines, Earth-moving machinery, Motor cycles and mopeds, Electromechanical components for electronic and telecommunications equipment, Nuclear energy engineering, TEXTILE AND LEATHER TECHNOLOGY, Plastics, Lubricants, industrial oils and related products, Telecommunication systems, Components for aerospace construction, Furniture, Electronic tubes, Linear and angular measurements, Printed circuits and boards, Solar energy engineering, Components and accessories for telecommunications equipment, Gas and steam turbines. Steam engines, Internal combustion engines for road vehicles, Electric road vehicles, Rubber and plastics products, Corrosion of metals, Machine tools, Bridge construction, Non-destructive testing, Optoelectronics. Laser equipment, Power stations in general, Power transmission and distribution networks, Agricultural machines, implements and equipment, Freight distribution of goods, Internal combustion engines, Electric filters, Pulps, Paper and board, Noise with respect to human beings, Machine tool systems, Fuels, Cellular materials, Measurement of volume, mass, density, viscosity, Ground service and maintenance equipment, Company organization and management, Manufacturing forming processes, Road vehicles in general, Diagnostic, maintenance and test equipment, Earthworks. Excavations. Foundation construction. Underground works.

German Institute for Standardization, Conditions for vibration testing

DIN 65151:2002-08 Aerospace series - Dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test)
DIN ISO 13373-2:2006 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data (ISO 13373-2:2005);English version of DIN ISO 13373-2:2006-01
DIN 65151:2002 Aerospace series - Dynamic testing of the locking characteristics of fasteners under transverse loading conditions (vibration test)
DIN ISO 13373-1:2002 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 1: General procedures (ISO 13373-1:2002)
DIN 45669-1:2020-06 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN ISO 13373-2:2016 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data (ISO 13373-2:2016)
DIN EN 1032:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value (includes Amendment A1:2008); English version of DIN EN 1032:2009-02
DIN IEC 60642:1988 Piezoelectric ceramic resonators and resonator units for frequency control and selection; standard values and conditions; measuring and test conditions; identical with IEC 60642, edition 1979
DIN 45669-1:2020 Measurement of vibration immissions - Part 1: Vibration meters - Requirements and tests
DIN 45669-1:2010 Measurement of vibration immission - Part 1: Vibration meters - Requirements and tests
DIN IEC 60642:1988-04 Piezoelectric ceramic resonators and resonator units for frequency control and selection; standard values and conditions; measuring and test conditions; identical with IEC 60642, edition 1979
DIN ISO 10816 Bb.1:2013 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Supplement 1: Methodology for selecting machinery vibration standards, including the shaft vibration (ISO/TR 19201:2013)
DIN ISO 10816 Beiblatt 1:2013-12 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Supplement 1: Methodology for selecting machinery vibration standards, including the shaft vibration (ISO/TR 19201:2013)
DIN 53513:1990 Determination of the viscoelastic properties of elastomers on exposure to forced vibration at non-resonant frequencies
DIN EN 16929:2019-03 Test methods - Timber floors - Determination of vibration properties; German version EN 16929:2018
DIN 70003:1993 Vibrational stress; measurement of parameters on vehicle parts
DIN ISO 10816 Beiblatt 1:2013 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Supplement 1: Methodology for selecting machinery vibration standards, including the shaft vibration (ISO/TR 19201:2013)
DIN EN 16929:2015 Test methods - Timber flooring systems - Determination of vibration properties; German and English version prEN 16929:2015
DIN EN 16929:2019 Test methods - Timber floors - Determination of vibration properties
DIN 45669-3:2006 Measurement of vibration immission - Part 3: Test (calibration and assessment) of the vibration measuring instrumentation; Primary test, verification, intermediate test, functional check in situ
DIN EN 13059:2009-06 Safety of industrial trucks - Test methods for measuring vibration; German version EN 13059:2002+A1:2008 / Note: DIN EN 13059 (2002-10) remains valid alongside this standard until 2009-12-28.
DIN EN 16905-3:2017 Gas-fired endothermic engine driven heat pumps - Part 3: Test conditions
DIN EN ISO 10846-3:2003 Acoustics and vibration - Laboratory measurement of the vibro-acoustic properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002); German version EN
DIN EN ISO 10846-4:2004 Acoustics and vibration - Laboratory measurement of the vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than elastic supports for translatory motion (ISO 10846-4:2003); German version EN ISO 10846-4:2
DIN EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008); English versio
DIN 45669-1 Berichtigung 1:2012 Measurement of vibration immission - Part 1: Vibration meters - Requirements and tests, Corrigendum to DIN 45669-1:2010-09
DIN EN ISO 10846-1:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008); English version of DIN EN ISO 10846-1:2008-11
DIN EN ISO 10846-4:2004-02 Acoustics and vibration - Laboratory measurement of the vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than elastic supports for translatory motion (ISO 10846-4:2003); German version EN ISO 10846-...
DIN ISO 10816-7:2009-08 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts (ISO 10816-7:2009)
DIN EN 61300-2-1:2010-07 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) (IEC 61300-2-1:2009); German version EN 61300-2-1:2009 + Corrigendum 2010 / Note: DIN EN 61300-2-1 (2003-09) r...
DIN ISO 3089:2010-11 Machine tools - Test conditions for self-centring, manually-operated chucks with one-piece jaws (ISO 3089:2005)
DIN EN IEC 60749-12:2018-07 Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency (IEC 60749-12:2017); German version EN IEC 60749-12:2018 / Note: DIN EN 60749-12 (2003-04) remains valid alongside this standard until 2021-01-17.
DIN EN 16905-3:2017-09 Gas-fired endothermic engine driven heat pumps - Part 3: Test conditions; German version EN 16905-3:2017 / Note: This standard is part of the DVGW body of rules.
DIN EN 60068-2-47:2006-03 Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests (IEC 60068-2-47:2005); German version EN 60068-2-47:2005 / Note: DIN EN 60068-2-47 (2000-08) remains valid alongside this standard until 20...
DIN 45673-7 Beiblatt 1:2013 Mechanical vibration - Resilient elements used in railway tracks - Part 7: Laboratory test procedures for resilient elements of floating slab track systems - Supplement 1: Test forms; with CD-ROM

Professional Standard - Machinery, Conditions for vibration testing

JB/T 6826-1993 Specification for piezoelectric vibrating measuring instrument
JB/T 8561-1997 Specifications for Acceleration Vibration Meters for Rolling Bearings
JB/T 8613-1997 Technical conditions for engine comprehensive test bench
JB/T 11945-2014 The technical conditions and test evaluation method for auto kinematic viscosity tester
JB/T 5457-1991 Specifications for 1/1 and 1/3 octave band filters for sound and vibration analysis
JB/T 11943-2014 The technical conditions and test evaluation method for auto cold filter plugging point tester
JB/T 11944-2014 The technical conditions and test evaluation method for auto pour point tester.automatic air pressure method

Association Francaise de Normalisation, Conditions for vibration testing

NF ISO 10055:2014 Vibrations mécaniques - Exigences requises pour les essais de vibrations des équipements de bord et des composants des machines
NF E90-373-2:2006 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2 : processing, analysis and presentation of vibration data.
NF E90-453*NF EN 1032+A1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value.
NF E90-971*NF ISO 10055:2014 Mechanical vibration - Vibration testing requirements for shi^pboard equipment and machinery components
NF E90-972-4/A1*NF ISO 20283-4/A1:2014 Mechanical vibration - Measurement of vibration on ships - Part 4 : measurement and evaluation of vibration of the ship propulsion machinery - Amendment 1
NF E90-453/IN1*NF EN 1032/IN1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
NF E90-453:2003 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value.
NF EN 4662:2010 Série aérospatiale - Spécification d'essais pour des composants de contrôle en vibration
NF E90-701/A1*NF EN ISO 10819/A1:2019 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1
NF S31-030-3*NF EN ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3 : indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
NF E90-453:1997 Mechanical vibration. Testing of mobile machinery in order to determine the whole-body vibration emisson value. General.
NF EN IEC 60721-2-6:2023 Classification des conditions d'environnement - Partie 2-6 : conditions d'environnement présentes dans la nature - Vibrations et chocs sismiques
NF E90-603*NF ISO 10814:1997 Mechanical vibration. Susceptibility and sensitivity of machines to unbalance.
NF C20-000-2-9*NF EN 60721-2-9:2014 Classification of environmental conditions - Part 2-9 : environmental conditions appearing in nature - Measured shock and vibration data - Storage, Transportation and in-use
NF EN 60721-2-9:2014 Classification des conditions d'environnement - Partie 2-9 : conditions d'environnement présentes dans la nature - Données de chocs et de vibrations mesurées - Stockage, transport et utilisation
NF P21-308*NF EN 16929:2018 Test Methods - Timber flooring systems - Determination of vibration properties
NF EN 16929:2018 Méthodes d'essais - Systèmes de plancher en bois - Détermination des propriétés vibratoires
NF E58-022*NF ISO 6395:2008 Earth moving machinery - Determination of sound power level - Dynamic test conditions
NF ISO 6395:2008 Engins de terrassement - Détermination du niveau de puissance acoustique - Conditions d'essai dynamique
NF EN 60068-2-47:2005 Essais d'environnement - Partie 2-47 : essais - Fixation de spécimens pour essais de vibrations, d'impacts et autres essais dynamiques
NF L70-200*NF EN 4662:2010 Aerospace series - Test specification for vibration control components
NF E35-610-3*NF EN 16905-3:2017 Gas-fired endothermic engine driven heat pumps - Part 3 : test conditions
NF U15-135-1/A1*NF EN ISO 5395-1/A1:2018 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1 : terminology and common tests - Amendment 1 : Annex G (Vibration test code - Hand-arm vibration and whole-body vibration)
NF S31-030-4*NF EN ISO 10846-4:2004 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 4 : dynamic stiffness of elements other than resilient supports for translatory motion
NF E90-210:1978 Moyens d'essais électrodynamiques utilisés pour la génération des vibrations - Méthodes de description des caractéristiques
NF H96-313:2002 Safety of industrial trucks - Test methods for measuring vibration.
NF H96-313*NF EN 13059+A1:2008 Safety of industrial trucks - Test methods for measuring vibration
NF H96-313/IN1*NF EN 13059/IN1:2008 Safety of industrial trucks - Test methods for measuring vibration
NF E65-125:1987 PORTABLE TOOLS. ACOUSTICS. TEST CODE FOR THE MEASUREMENT OF THE NOISE EMITTED BY HAND-HELD,POWER OPERATED,PORTABLE OSCILLATING AND BELT SANDER.
NF S31-030-1*NF EN ISO 10846-1:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1 : principles and guidelines
NF U25-515*NF EN ISO 22867:2021 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles
NF E90-964*NF ISO 18649:2015 Mechanical vibration - Evaluation of measurement results from dynamic tests and investigations on bridges
NF H00-043:1993 Packaging. Complete, filled transport packages. Vibration test at fixed low frequency.
NF EN ISO 10846-4:2004 Acoustique et vibrations - Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques - Partie 4 : raideur dynamique en translation des éléments autres que les supports élastiques
NF EN 60512-6-5:2000 Composants électromécaniques pour équipements électroniques - Procédures d'essai de base et méthodes de mesure - Partie 6 : essais de contraintes dynamiques - Section 5 : essai 6e : vibrations aléatoires
NF S31-030-2*NF EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2 : direct method for determination of the dynamic stiffness of resilient supports for translatory motion
NF EN ISO 10846-1:2008 Acoustique et vibrations - Mesurage en laboratoire des propriétés de transfert vibro-acoustique des éléments élastiques - Partie 1 : principes et lignes directrices
NF E58-022:1997 Acoustics. Measurement of exterior noise emitted by earth-moving machinery. Dynamic test conditions.
NF ISO 10816-7:2011 Vibrations mécaniques - Évaluation des vibrations des machines par mesurages sur les parties non tournantes - Partie 7 : pompes rotodynamiques pour applications industrielles, y compris mesurages sur les arbres tournants
NF EN IEC 61300-2-1:2023 Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 2-1 : essais - Vibrations (sinusoïdales)
NF EN 61300-2-1:2010 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-1 : essais - Vibrations (sinusoïdales)
NF E90-760-8:2014 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 8 : reciprocating compressor systems

RU-GOST R, Conditions for vibration testing

GOST 26044-1983 Vibration. Equipment for operational monitoring of power hydroturbine unit vibration state. General technical requirements
GOST 25051.4-1983 Electrodynamic vibration testing equipment. General specifications
GOST R 53080-2008 Vibration. Testing of mobile machinery in order to determine the vibration emission value. Industrial trucks
GOST ISO 8579-2-2002 Vibration. Determination of mechanical vibrations of gear units during acceptance testing
GOST 31193-2004 Vibration. Testing of mobile machinery in order to determine the vibration emission value. General requirements
GOST 31421-2010 Vibration. Testing of mobile machinery in order to determine the vibration emission value. Industrial trucks
GOST 31367-2008 Vibration. Testing of mobile machinery in order to determine the vibration emission value. Aircraft ground support equipment
GOST 28618-1990 Rubber hoses and hose assemblies for rotary drilling and vibration applications. Specifications
GOST R ISO 8579-2-1999 Mechanical vibration. Determination of mechanical vibration of gear units during acceptance testing
GOST R IEC 60068-3-8-2015 Environmental dynamic testing for machines, instrument and other articles. Selecting amongst vibration tests
GOST ISO 10846-1-2002 Vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 1. General principles of measurements and guidelines
GOST R 55177-2012 Mechanical vibration. Laboratory measurement of vibration-and-acoustic properties of resilient elements filled with liquids. Principles
GOST R ISO 10846-1-2010 Vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 1. General principles of measurements
GOST 31368.4-2008 Vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 4. Dynamic stiffness of elements other than resilient supports for translatory motion
GOST ISO 10816-4-2002 Vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 4. Gas turbine driven sets
GOST 31368.3-2008 Vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 3. Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
GOST 21136-1975 Complete, filled transport packages-vibrations test at fixed low frequency
GOST R 55265.7-2012 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 7. Rotodynamic pumps for industrial applications
GOST ISO 10816-1-1997 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 1. General guidelines
GOST 17751-1979 Jet fuel. Method of test for thermal oxidation stability under dynamic conditions
GOST R ISO 10846-1-1999 Acoustic and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Part 1. Principles and guidelines
GOST R ISO 10816-8-2016 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Part 8. Reciprocating compressor systems
GOST R ISO 18436-2-2005 Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 2. Vibration condition monitoring and diagnostics
GOST 31323-2006 Vibration. Testing of mobile machinery in order to determine the vibration emission value. Agricultural wheeled tractors and field machinery

British Standards Institution (BSI), Conditions for vibration testing

BS ISO 13373-2:2006 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Processing, analysis and presentation of vibration data
BS ISO 13373-1:2002 Condition monitoring and diagnostics of machines - Vibration condition monitoring - General procedures
PD ISO/TR 27609:2007 Vibration in hand-held tools. Vibration measurement methods for grinders. Evaluation of round-robin test
BS IEC 62047-32:2019 Semiconductor devices. Micro-electromechanical devices - Test method for the nonlinear vibration of MEMS resonators
BS EN 1032:2003 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
BS ISO 10816-1+A1:1996 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. General guidelines
BS ISO 10816-1:1995+A1:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - General guidelines
BS ISO 16130:2015 Aerospace series. Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test)
BS EN 60721-2-9:2014 Classification of environmental conditions. Environmental conditions appearing in nature. Measured shock and vibration data. Storage, transportation and in-use
PD IEC TR 62131-8:2022 Environmental conditions. Vibration and shock of electrotechnical equipment. Transportation by ship
BS ISO 16063-31:2009 Methods for the calibration of vibration and shock transducers - Testing of transverse vibration sensitivity
PD IEC/TR 62131-1:2011 Environmental conditions. Vibration and shock of electrotechnical equipment. Process for validation of dynamic data
BS EN 2591-6403:2001 Elements of electrical and optical connection. Test methods - Optical elements. Vibrations
BS EN 16929:2018 Test methods. Timber floors. Determination of vibration properties
BS EN IEC 60721-2-6:2023 Tracked Changes. Classification of environmental conditions. Environmental conditions appearing in nature. Earthquake vibration and shock
BS 7854-1:1996 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - General guidelines
PD IEC TR 62131-7:2020 Environmental conditions. Vibration and shock of electrotechnical equipment. Transportation by rotary wing aircraft
BS EN 60255-21-1:1996 Electrical relays. Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Vibration tests (sinusoidal)
BS EN ISO 10846-4:2003 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Dynamic stiffness of elements other than resilient supports for translatory motion
BS 7527-2.6:1991 Classification of environmental conditions - Environmental conditions appearing in nature - Earthquake vibration and shock
PD IEC/TR 62131-6:2017 Environmental conditions. Vibration and shock of electrotechnical equipment. Transportation by propeller aircraft
BS EN 60512-6-5:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Dynamic stress tests - Test 6e - Random vibration - Section 5: Test 6e: Random vibration
BS EN ISO 10846-1:2009 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Principles and guidelines
BS EN ISO 10846-1:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008)
BS ISO 6395:2009 Earth-moving machinery. Determination of sound power level. Dynamic test conditions
BS ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test conditions
BS EN 60255-21-1:1989 Electrical relays - Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Vibration tests (sinusoidal)
BS ISO 6281:2007 Plain bearings. Testing under conditions of hydrodynamic and mixed lubrication in test rigs
BS EN 4662:2010 Aerospace series - Test specification for vibration control components
BS EN 61300-2-1:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Tests - Vibration (sinusoidal)
BS EN 61300-2-1:2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Vibration (sinusoidal)
PD IEC/TR 62131-4:2011 Environmental conditions. Vibration and shock of electrotechnical equipment. Equipment transported in road vehicles
PD IEC/TR 62131-5:2015 Environmental conditions. Vibration and shock of electrotechnical equipment. Equipment during storage and handling
BS IEC 62047-28:2017 Semiconductor devices. Micro-electromechanical devices - Performance testing method of vibration-driven MEMS electret energy harvesting devices
BS ISO 10816-7:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Rotodynamic pumps for industrial applications, including measurements on rotating shafts
BS EN 61338-1-3:2000 Waveguide type dielectric resonators.. General information and test conditions. Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency
BS ISO 10816-8:2014 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Reciprocating compressor systems
BS 6955-22:1997 Calibration of vibration and shock pick-ups. Accelerometer resonance testing. General methods
BS PD IEC/TR 62131-5:2015 Environmental conditions. Vibration and shock of electrotechnical equipment. Equipment during storage and handling
PD IEC/TR 62131-3:2011 Environmental conditions. Vibration and shock of electrotechnical equipment. Equipment transported in rail vehicles
BS ISO 21782-1:2019 Electrically propelled road vehicles. Test specification for electric propulsion components - General test conditions and definitions
20/30429941 DC BS EN 60721-2-6. Classification of environmental conditions. Part 2-6. Environmental conditions appearing in nature. Earthquake vibration and shock
BS ISO 18649:2004 Mechanical vibration - Evaluation of measurement results from dynamic tests and investigations on bridges
BS ISO 10816-4:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Gas turbine sets with fluid-film bearings
BS ISO 6281:2020 Plain bearings. Testing under conditions of hydrodynamic and mixed lubrication in test rigs
BS EN ISO 10846-3:2002 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
BS EN 13059:2002 Safety of industrial trucks - Test methods for measuring vibration
BS ISO 4821:2022 Plain bearings. Dynamic adhesion test method for DLC coated parts under lubricated condition
BS IEC 63150-1:2019 Semiconductor devices. Measurement and evaluation methods of kinetic energy harvesting devices under practical vibration environment - Arbitrary and random mechanical vibrations
BS 7854-6:1996 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Reciprocating machines with power ratings above 100 kW
BS ISO 10816-21:2015 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts. Horizontal axis wind turbines with gearbox
BS EN ISO 22867:2021 Forestry and gardening machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
BS ISO 7626-2:2015 Mechanical vibration and shock. Experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter
BS ISO 3089:2006 Machine tools - Test conditions for self-centring, manually-operated chucks with one-piece jaws
BS EN IEC 61300-2-1:2023 Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Vibration (sinusoidal)
BS 7854-4:1998 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Gas turbine driven sets excluding aircraft derivatives
BS ISO 21782-1:2023 Tracked Changes. Electrically propelled road vehicles. Test specification for electric propulsion components. General test conditions and definitions
BS EN 61300-2-1:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Vibration (sinusoidal)
BS EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
BS ISO 8636-2:2008 Machine tools - Test conditions for bridge-type milling machines - Testing of the accuracy - Travelling bridge (gantry-type) machines

Professional Standard - Aviation, Conditions for vibration testing

HB 5830.5-1984 Airborne Equipment Environmental Conditions and Test Method Vibration
HB 6106-1986 Specifications of vibration sensors for aero-engine bench test
HB 5830.6-1984 Airborne Equipment Environmental Conditions and Test Methods Transportation Vibration
HB 5830.7-1985 Airborne Equipment Environmental Conditions and Test Methods Shelling Vibration
HB 5830.15-1996 Airborne Equipment Environmental Conditions and Test Methods External Vibration
HB 6167.6-1989 Vibration test of civil aircraft airborne equipment environmental conditions and test methods
HB 6388-1990 Environmental conditions and test methods for airborne equipment Temperature-humidity-vibration
HB 6167.6-2014 Environmental conditions and test procedures for airborne equipment of civil airplane.Part 6: Vibration test

GOSTR, Conditions for vibration testing

GOST R 53963.2-2010 Vibration. Measurement of vibrations in buildings. Measuring instrumentation tests
GOST 28975-1991 Acoustics. Measurements of exterior noise emitted by earth-moving machinery. Dynamic test condition

Professional Standard - Electron, Conditions for vibration testing

SJ 20115.5-1992 Environmental conditions and test methods for aircraft radar.Vibration test
SJ 20137-1992 Technical specifications,vibration shock test methods for printed board assembly
SJ 1871-1981 Measurement conditions for gas laser devices

International Organization for Standardization (ISO), Conditions for vibration testing

ISO 13373-1:2002 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 1: General procedures
ISO 13373-2:2005 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data
ISO 13373-2:2016 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data
ISO 10055:1996 Mechanical vibration - Vibration testing requirements for shipboard equipment and machinery components
ISO 13373-9:2017 Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 9: Diagnostic techniques for electric motors
ISO 20283-3:2006/Amd 1:2016 Mechanical vibration - Measurement of vibration on ships - Part 3: Pre-installation vibration measurement of shipboard equipment; Amendment 1
ISO 20283-4:2012/Amd 1:2014 Mechanical vibration - Measurement of vibration on ships - Part 4: Measurement and evaluation of vibration of the ship propulsion machinery; Amendment 1
ISO 16130:2015 Aerospace series - Dynamic testing of the locking behaviour of bolted connections under transverse loading conditions (vibration test)
ISO 10819:2013/Amd 2:2021 Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand — Amendment 2
ISO 10819:2013/Amd 1:2019 Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand — Amendment 1
ISO/TR 27609:2007 Vibration in hand-held tools — Vibration measurement methods for grinders — Evaluation of round-robin test
ISO 4866:1990/Amd 1:1994 Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 1
ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test conditions
ISO/TS 19466:2017 Electrically propelled mopeds and motorcycles — Test method for evaluating performance of regenerative braking systems
ISO 6281:2007 Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs
ISO 6721-7:1996/Amd 1:2007 Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method — Amendment 1
ISO 6721-5:1996/Amd 1:2007 Plastics - Determination of dynamic mechanical properties - Part 5: Flexural vibration - Non-resonance method; Amendment 1
ISO 6721-6:1996/Amd 1:2007 Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method; Amendment 1
ISO 5347-11:1993 Methods for the calibration of vibration and shock pick-ups; part 11: testing of transverse vibration sensitivity
ISO 10816-1:1995/Amd 1:2009 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines; Amendment 1
ISO 10846-4:2003 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
ISO 10846-1:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines
ISO 10846-5:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
ISO 6395:1988 Acoustics; measurement of exterior noise emitted by earth-moving machinery; dynamic test conditions
ISO 5349-2:2001/Amd 1:2015 Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace — Amendment 1
ISO/TR 230-8:2009 Test code for machine tools - Part 8: Determination of vibration levels
ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
ISO 3089:2005 Machine tools - Test conditions for self-centring, manually operated chucks with one-piece jaws
ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
ISO 18649:2004 Mechanical vibration - Evaluation of measurement results from dynamic tests and investigations on bridges
ISO 7626-2:1990 Vibration and shock; experimental determination of mechanical mobility; part 2: measurements using single-point translation excitation with an attached vibration exciter
ISO 16063-31:2009/WD Amd 1 Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity — Amendment 1

Group Standards of the People's Republic of China, Conditions for vibration testing

T/CEEIA 555-2021 Determination method of Vibration and Shock Test Conditions for Mobile Robot

Korean Agency for Technology and Standards (KATS), Conditions for vibration testing

KS B ISO 13373-2:2007 Condition monitoring and diagnostics of machines－Vibration condition monitoring－Part 2：Processing, analysis and presentation of vibration data
KS B ISO 13373-2:2017 Condition monitoring and diagnostics of machines —Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data
KS B ISO 10055_2001:2016 Mechanical vibration- Vibration testing requirements for shipboard equipment and machinery components
KS B ISO 10055_2001-2016(2021) Mechanical vibration- Vibration testing requirements for shipboard equipment and machinery components
KS B ISO 13373-1:2004 Condition monitoring and diagnostics of machines－Vibration condition monitoring－Part 1：General procedures
KS B ISO 6395:2017 Earth-moving machinery — Determination of sound power level — Dynamic test conditions
KS C IEC 60642:2018 Piezoelectric ceramic resonators and resonator units for frequency control and selection — Chapter I: Standard values and conditions — Chapter II: Measuring and test conditions
KS C IEC 60642-2023 Piezoelectric Ceramic Resonators and Resonator Units for Frequency Control and Selection Chapter 1 Standard Values and Conditions Chapter 2 Measurement and Test Conditions
KS C IEC 60721-2-9:2020 Classification of environmental conditions — Part 2-9:Environmental conditions appearing in nature — Measured shock and vibration data — Storage, transportation and in-use
KS B ISO 10816-1:2011 Mechanical vibration-Evaluation of machine vibration by measurements on non-rotating parts-Part 1:General guidelines
KS B ISO 10816-1:2016 Mechanical vibration－Evaluation of machine vibration by measurements on non-rotating parts－Part 1：General guidelines
KS F 2428-1990 Testing Method for Determination of Vibrating Factor by Consistency of Concrete
KS B 7059-1984 Methods of vibration measurement for industria1 sewing machine
KS I ISO 6395:2004 Acoustics-Measurement of exterior noise emitted byearth-moving machinery-Dynamic test conditions
KS R ISO TS 19466:2021 Electrically propelled mopeds and motorcycles — Test method for evaluating performance of regenerative braking systems
KS B ISO 16063-31:2019 Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity
KS B ISO 6281:2009 Plain bearings-Testing under conditions of hydrodynamic and mixed lubrication in test rigs
KS B ISO 6281:2013 Plain bearings－Testing under conditions of hydrodynamic and mixed lubrication in test rigs
KS B ISO 6395-2017(2022) Earth-moving machinery — Determination of sound power level — Dynamic test conditions
KS I ISO 10846-1:2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 1: Principles and guidelines
KS B 0713-11-2001 Methods for the calibration of vibration and shock pick-ups-Part 11:Testing of transverse vibration sensitivity
KS M 3023-2002 Testing method for dynamic mechanical properties of plasticsby non－resonant, forced, fixed frequency oscillation
KS M 3023-1982 Testing method for dynamic mechanical properties of plasticsby non－resonant, forced, fixed frequency oscillation
KS C IEC 61300-2-1:2020 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 2-1: Tests — Vibration(sinusoidal)
KS R 0100-2008 Road vehicles－Fuel injection pump testing－Part 2：Static conditions
KS B ISO 7626-2:2014 Vibration and shock — Experimental determination of mechanical mobility — Part 2: Measurements using single-point translation excitation with an attached vibration exciter
KS C IEC 60068-2-47:2010 Environmental testing－Part 2-47：Tests－Mounting of specimens for vibration, impact and similar dynamic tests
KS I ISO 10846-4:2007 Acoustics and vibration－Laboratory measurement of vibro－acoustic transfer properties of resilient elements－Part 4：Dynamic stiffness of elements other than resilient supports for translatory motion
KS M 6665-2011(2016) Testing method for dynamic properties of rubber materials for vibration isolators
KS B ISO 2433:2020 Machine tools — Test conditions for external cylindrical and universal grinding machines with a movable table — Testing of the accuracy
KS B ISO 18649:2005 Mechanical vibration-Evaluation of measurement results from dynamic tests and investigations on bridges
KS I ISO 10846-1:2007 Acoustics and vibration－Laboratory measurement of vibro－acoustic transfer properties of resilient elements－ Part 1：Principles and guidelines
KS I ISO 10846-4:2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
KS B ISO 10816-7:2017 Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
KS B ISO 6396:2017 Earth-moving machinery — Determination of emission sound pressure level at operator's position — Dynamic test conditions
KS B ISO 6155:2019 Machine tools — Test conditions for horizontal spindle turret and single spindle automatic lathes — Testing of the accuracy
KS F 2428-2015 Testing Method for Determination of Vibrating Factor by Consistency of Concrete
KS F 2428-1985 Testing Method for Determination of Vibrating Factor by Consistency of Concrete
KS B ISO 10816-5_2001:2016 Mechanical vibration－Evaluation of machine vibration by measurements on non-rotating parts－Part 5：Machine sets in hydraulic power generating and pumping plants
KS I ISO 10846-2:2007 Acoustics and vibration－Laboratory measurement of vibro－acoustic transfer properties of resilient elements－Part 2：Dynamic stiffness of elastic supports for translatory motion－Direct method
KS I ISO 10846-3:2007 Acoustics and vibration－Laboratory measurement of vibro－acoustic transfer properties of resilient elements－Part 3：Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
KS C IEC 60068-3-8-2005(2020) Environmental testing－Part 3－8：Supporting documentation and guidance－Selecting amongst vibration tests
KS B 9702-2008 Testing method of operator seat-transmitted vibration for construction machinery
KS C IEC 61897:2019 Overhead lines — Requirements and tests for Stockbridge type aeolian vibration dampers

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Conditions for vibration testing

GB/T 32333-2015 Rolling bearings.Measuring methods and specifications for vibration (acceleration)
GB/T 19845-2005 Mechanical vibration.Vibration testing requirements for shipboard equipment and machinery components
GB/T 13823.8-1994 Methods for the calibration of vibration and shock pick-ups Testing of transverse vibration sensitivity
GB/T 6075.1-2012 Mechanical vibration.Evaluation of machine vibration by measurements on non-rotating parts.Part 1:General guidelines
GB/T 25614-2010/ISO 6395:2008 Dynamic test conditions for the determination of sound power levels of earth-moving machinery
GB/T 25614-2010/ISO 6395-2008 Dynamic test conditions for the determination of sound power levels of earth-moving machinery
GB/T 25614-2010 Earth-moving machinery.Determination of sound power level.Dynamic test conditions
GB/T 20485.31-2011 Methods for the calibration of vibration and shock transducers.Part 31:Testing of transverse vibration sensitivity
GB/T 13855-1992 Technical conditions for channel transmission automatic test equipment
GB/T 3789.22-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of vibration stability
GB/Z 41305.1-2022 Environmental conditions—Vibration and shock of electrotechnical equipment—Part 1:Process for validation of dynamic data
GB/T 22159.3-2008 Acoustics and vibration.Laboratory measurement of vibro-acoustic transfer properties of resilient element.Part 3:Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
GB/T 22159.2-2012 Acoustics and vibration.Laboratory measurement of vibro-acoustic transfer properties of resilient elements.Part 2:Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
GB/T 8543-1987 Determination of mechanical vibrations of gear units during acceptance testing
GB/T 6075.7-2015 Mechanical vibration - Measurement and evaluation of vibration in machines on non-rotating parts - Part 7: Rotating power pumps for industrial applications (including measurements on rotating shafts)
GB/T 6075.4-2015 Mechanical vibrations - Measurement and evaluation of vibrations in machines on non-rotating parts - Part 4: Gas turbine units with plain bearings
GB/Z 41305.2-2022 Environmental conditions—Vibration and shock of electrotechnical equipment—Part 2:Equipment during storage and handling
GB/T 13823.20-2008 Methods for the calibration of vibration and shock pick-ups-Accelerometer resonance testing-General methods
GB/T 16710.4-1996 Measurement of exterior noise emitted by earth-moving machinery--Dynamic test conditions
GB/T 11349.2-2006 Vibration and shock.Experimental determination of mechanical mobility.Part 2: Measurements using single-point translation excitation with an attached vibration exciter
GB/T 11798.2-2001 Motor vehicle safety testing equipment Technical requirements of verification--Part 2: Technical requirements of verification for opposite force roller brake tester
GB/T 15405-2006 Thermal specifications and testing method for passive solar houses
GB/T 11798.9-2001 Motor vehicle safety testing equipment Technical requirements of verification--Part 9: Technical requirements of verification for platform brake tester

RO-ASRO, Conditions for vibration testing

STAS 11115/8-1992 Environmental conditions and test procedures for airborne equipment. Section 8. Vibration
STAS 11115/7-1990 Aiecraft ENVIRONMENTAL CONDITIONS AND TEST PROCEDURES FOR AIRBORNE EQUIPMENT Operational shocks and crash safety
STAS 8048/1-1976 Building acoustics MECHANICAL VIBRAI ION 1NSULATING MATERIALS Determination of elastic properties under dynamic loading conditions
STAS CEI 721-2-6-1992 Classification of environmetal conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock
STAS 9904/11-1978 ELECTRICAL ROTATING MACHINES METHODS OF TEST Nethod for measuring the ibration level
STAS SR ISO 2419:1996 Leather - Conditioning of test pieces for physical tests
STAS 8393/30-1988 Environmental testing procedures MOUNTING OF COMPONENTS ANDEQUIPMENT FOR DYNAMIC TESTS (SHOCK, BUMP, VIBRATION AND STEADY-STATE ACCELERATION)

AIA/NAS - Aerospace Industries Association of America Inc., Conditions for vibration testing

NASM1312-7-1997 Fasteners Test Methods; Method 7 Vibration
NAM1312-107-1997 Fastener Test Methods@ Metric; Method 107 Vibration
NASM1312-7-2012 FASTENER TEST METHODS METHOD 7 VIBRATION (Rev 1)
NAM1312-107-2012 FASTENER TEST METHODS@ METRIC METHOD 107 VIBRATION (Rev 1)

机械工业部, Conditions for vibration testing

JB/T 6318-1992 Technical conditions for turbine shaft vibration measurement device (eddy current type)

Professional Standard - Energy, Conditions for vibration testing

NB/T 11263-2023
NB/T 20382-2016 Vibration monitoring of internal structures in pressurized water reactor nuclear power plants

ES-AENOR, Conditions for vibration testing

INTA 80 01 10

Society of Automotive Engineers (SAE), Conditions for vibration testing

SAE J2380-2013 Vibration Testing of Electric Vehicle Batteries
SAE J2380-2009 Vibration Testing of Electric Vehicle Batteries

SAE - SAE International, Conditions for vibration testing

SAE J2380-2021 Vibration Testing of Electric Vehicle Batteries

PL-PKN, Conditions for vibration testing

PN N01355-1991 Vibrations. Measuring instrumentation for measuring human response to vibrations. Requirements and tests
PN S04100-1991 Vibration. Test methods and evaluation of mechanical vibration at work places of vehicles
PN O79164-1970 Transport packages Methods of horizontal vibration tests
PN H04427-1986 Cavitation Erosion Material Resistance Test Using Vibratory Method
PN N01356-1991 Vibrations. Piezoelectric accelerometers for measurement of human response to mechanica vibrations. Requirements and tests
PN E08400-10-1988 Hand-held motor operated electric tools Inspection tests under service conditions
PN C04860-04-1990 ?on exchange resins Testing methods Column for determination of exchange ' capacities under dynamie conditions

TIA - Telecommunications Industry Association, Conditions for vibration testing

TIA/EIA-455-11B-1994 FOTP-11 Vibration Test Procedure for Fiber Optic Components and Cables
TIA/EIA-455-11C-2002 FOTP-11 Vibration Test Procedure for Fiber Optic Components and Cables

Aerospace Industries Association, Conditions for vibration testing

AIA NASM1312-7-1997 Fasteners Test Methods; Method 7 Vibration 53GP
AIA NAM1312-107-1997 Fastener Test Methods, Metric; Method 107 Vibration FSC 53GP

Professional Standard - Geology, Conditions for vibration testing

DZ 0039.4-1992 Basic environmental test conditions and methods for geological instrument products Vibration test
DZ 28.3-1984 Basic environmental test conditions and methods for geological instrument products Vibration test
DZ 29.1-1984 Basic environmental test conditions and methods for transport packaging of geological instruments Products Vibration test for transport packaging
DZ 0040.2-1992 Basic environmental test conditions and methods for transport packaging of geological instruments Products Vibration test for transport packaging

KR-KS, Conditions for vibration testing

KS B ISO 10055_2001-2016 Mechanical vibration- Vibration testing requirements for shipboard equipment and machinery components
KS B ISO 6395-2017 Earth-moving machinery — Determination of sound power level — Dynamic test conditions
KS C IEC 60642-2018 Piezoelectric ceramic resonators and resonator units for frequency control and selection — Chapter I: Standard values and conditions — Chapter II: Measuring and test conditions
KS C IEC 60721-2-9-2020 Classification of environmental conditions — Part 2-9:Environmental conditions appearing in nature — Measured shock and vibration data — Storage, transportation and in-use
KS C IEC 60642-2018(2023) Piezoelectric ceramic resonators and resonator units for frequency control and selection — Chapter I: Standard values and conditions — Chapter II: Measuring and test conditions
KS R ISO TS 19466-2021 Electrically propelled mopeds and motorcycles — Test method for evaluating performance of regenerative braking systems
KS B ISO 16063-31-2019 Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity
KS I ISO 10846-1-2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 1: Principles and guidelines
KS C IEC 61300-2-1-2020 Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 2-1: Tests — Vibration(sinusoidal)
KS B ISO 2433-2020 Machine tools — Test conditions for external cylindrical and universal grinding machines with a movable table — Testing of the accuracy
KS I ISO 10846-4-2020 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements —Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
KS B ISO 6396-2017 Earth-moving machinery — Determination of emission sound pressure level at operator's position — Dynamic test conditions
KS B ISO 6155-2019 Machine tools — Test conditions for horizontal spindle turret and single spindle automatic lathes — Testing of the accuracy
KS B ISO 10816-5_2001-2016 Mechanical vibration－Evaluation of machine vibration by measurements on non-rotating parts－Part 5：Machine sets in hydraulic power generating and pumping plants
KS B ISO 3070-4-2014 Test conditions for boring and milling machines with horizontal spindle — Testing of the accuracy — Part 4: Planer type machines with movable column
KS B ISO 10816-7-2022 Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
KS C IEC 61897-2019 Overhead lines — Requirements and tests for Stockbridge type aeolian vibration dampers

Professional Standard - Aquaculture, Conditions for vibration testing

SC/T 7002.8-1991 Environmental test conditions and methods for marine electronic equipment sinusoidal vibration

Professional Standard - Agriculture, Conditions for vibration testing

SC/T 7002.8-1992 Environmental test conditions and methods for marine electronic equipment - sinusoidal vibration

European Committee for Standardization (CEN), Conditions for vibration testing

EN 1032:1996/A1:1998 Amd 1 Mechanical Vibration - Testing of Mobile Machinery in Order to Determine the Whole-Body Vibration Emission Value - General Ratified European Text; Amendment 1
EN 1032:2003 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value (Incorporates Amendment A1: 2008)
EN 1032:1996/PRA1:1997 AMD prA1 Mechanical Vibration - Testing of Mobile Machinery in Order to Determine the Whole-Body Vibration Emission Value - General
EN 1032:1996 (WITHDRAWN) Mechanical Vibration - Testing of Mobile Machinery in Order to Determine the Whole-Body Vibration Emission Value - General
EN ISO 10819:2013/A1:2019 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO 10819:2013/Amd 1:2019)
EN ISO 10819:2013/A2:2022 Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 2 (ISO 10819:2013/Amd 2:2021)
EN 13059:2002 Safety of industrial trucks - Test methods for measuring vibration (Incorporates Amendment A1: 2008)
EN ISO 10846-2:1998 Acoustics and Vibration - Laboratory Measurement of Vibro-Acoustic Transfer Properties of Resilient Elements - Part 2: Dynamic Stiffness of Elastic Supports for Translatory Motion - Direct Method ISO 10846-2:1997
EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
EN 2591-403:1998 Aerospace Series - Elements of Electrical and Optical Connection - Test Methods - Part 403: Sinusoidal and Random Vibration
EN 13059:2002+A1:2008 Safety of industrial trucks - Test methods for measuring vibration
EN ISO 10846-1:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008)
EN 1915-3:2004 Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction (Incorporates Amendment A1: 2009)
EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5

农业农村部, Conditions for vibration testing

SC/T 7002.8-2018 Environmental test conditions and methods for electronic equipment used on fishing vessels Sinusoidal vibration

VE-FONDONORMA, Conditions for vibration testing

Electronic Components, Assemblies and Materials Association, Conditions for vibration testing

ECA 186-8E-1978 Passive Electronic Component Parts, Test Methods for; Method 8: Vibration, High Frequency
ECA 186-7E-1978 Passive Electronic Component Parts, Test Methods for; Method 7: Vibration Fatigue Test (Low Frequency, 10 to 55 Hertz)

国家市场监督管理总局、中国国家标准化管理委员会, Conditions for vibration testing

GB/T 4797.9-2021 Classification of environmental conditions—Environmental conditions appearing in nature—Measured shock and vibration data during storage, transportation and in-use

GB-REG, Conditions for vibration testing

REG NASA-LLIS-0775-2000 Lessons Learned ?Random Vibration Testing
REG NASA-LLIS-0817-2000 Lessons Learned ?Vibroacoustic Qualification Testing of Payloads, Subsystems, and Components

Danish Standards Foundation, Conditions for vibration testing

DS/EN 1032+A1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
DS/HD 478.2.6 S1:1998 Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Earthquake vibration and shock
DS/EN 60068-3-8:2004 Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
DS/EN 60512-6-5:2001 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration
DS/EN 13059+A1:2008 Safety of industrial trucks - Test methods for measuring vibration
DS/EN ISO 22867:2012 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles
DS/EN ISO 10846-4:2004 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
DS/EN 20187:1993 Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
DS/ISO 6396/Cor 1:2013 Earth-moving machinery - Determination of emission sound pressure level at operator's position - Dynamic test conditions
DS/EN 61300-2-1:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
DS/EN ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion

Lithuanian Standards Office , Conditions for vibration testing

LST EN 1032-2003+A1-2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
LST HD 478.2.6 S1-2002 Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock (IEC 60721-2-6:1990)
LST EN 13059-2003+A1-2008 Safety of industrial trucks - Test methods for measuring vibration
LST ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test conditions (ISO 6395:2008, identical)

AENOR, Conditions for vibration testing

UNE-EN 1032:2004+A1:2009 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
UNE 137003:2003 Corrugated fibreboard packaging for fruits and vegetables. Vibration tests at fixed low frequency.( vibrant and oscillant table).
UNE-EN 60068-3-8:2004 Environmental testing -- Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
UNE-ISO 6395:2013 Earth-moving machinery. Determination of sound power level. Dynamic test conditions
UNE 20675-2-6:1993 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS. PART 2: ENVIRONMETAL CONDITIONS APPEARING IN NATURE. EARTHQUAKE VIBRATION AND SHOCK.
UNE-EN 16905-3:2017 Gas-fired endothermic engine driven heat pumps - Part 3: Test conditions
UNE-EN 60512-6-5:2000 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 6: Dynamic stress tests -- Section 5: Test 6e: Random vibration.
UNE-EN 13059:2002+A1:2008 Safety of industrial trucks - Test methods for measuring vibration
UNE 15319:2004 External cylindrical and universal grinding machines with a movable table. Test conditions. Testing of the accuracy.
UNE 28545:1988 ENVIRONMENTAL TESTS FOR AIRCRAFT EQUIPMENT. PART 3.4: ACOUSTIC VIBRATION.
UNE-EN 60749-12:2003 Semiconductor devices - Mechanical and climatic test methods -- Part 12: Vibration, variable frequency.
UNE 15323:2004 Horizontal spindle turret and single spindle automatic lathes. Test conditions. Testing of the accuracy
UNE-EN 60068-2-47:2006 Environmental testing -- Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests (IEC 60068-2-47:2005)
UNE-EN 61300-2-1:2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-1: Tests - Vibration (sinusoidal)

CZ-CSN, Conditions for vibration testing

CSN IEC 721-2-6:1993 Classification of environmental conditions. Part 2: Environmental conditions appearing in nature. Earthquake vibration and shock
CSN 35 6853-1982 Vibration. Means for testing hammers powered pneumatically electrically or by combustion engine.
CSN ISO 2433:1992 Acceptance conditions for external cylindrical grinding machines with a movable table — Testing of accuracy
CSN 50 0303-1978 Paper testing —Methoil for conditioning f páper and board est samples
CSN ISO 6899:1992 Acceptance conditions of open front mechanical power presses. Testing of the accuracy
CSN 64 5401-1974 Testing of cellular materials. General conditions for testing of cellular materials

Aerospace Industries Association/ANSI Aerospace Standards, Conditions for vibration testing

AIA/NAS NASM1312-7-2012 FASTENER TEST METHODS METHOD 7 VIBRATION (Rev 1)
AIA/NAS NASM1312-7-1997 Fasteners Test Methods; Method 7 Vibration
AIA/NAS NAM1312-107-2012 FASTENER TEST METHODS, METRIC METHOD 107 VIBRATION (Rev 1)

ES-UNE, Conditions for vibration testing

UNE-EN 4662:2010 Aerospace series - Test specification for vibration control components (Endorsed by AENOR in May of 2010.)
UNE-EN 16929:2019 Test Methods - Timber floors - Determination of vibration properties
UNE-EN IEC 60721-2-6:2023 Classification of environmental conditions - Part 2-6: Environmental conditions appearing in nature - Earthquake vibration and shock (Endorsed by Asociación Española de Normalización in March of 2023.)
UNE-EN 60721-2-9:2014 Classification of environmental conditions - Part 2-9: Environmental conditions appearing in nature - Measured shock and vibration data - Storage, transportation and in-use (Endorsed by AENOR in October of 2014.)
UNE-EN ISO 22867:2022 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021)
UNE-EN IEC 60749-12:2018 Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency (Endorsed by Asociación Española de Normalización in April of 2018.)
UNE-EN ISO 5395-1:2014/A1:2018 Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: Terminology and common tests - Amendment 1: Annex G (Vibration test code - Hand-arm vibration and whole-body vibration) (ISO 5395-1:2013/Amd 1:2017)

American Society for Testing and Materials (ASTM), Conditions for vibration testing

ASTM D999-07 Standard Test Methods for Vibration Testing of Shipping Containers
ASTM D999-08 Standard Test Methods for Vibration Testing of Shipping Containers
ASTM D999-01 Standard Test Methods for Vibration Testing of Shipping Containers
ASTM E756-05(2010) Standard Test Method for Measuring Vibration-Damping Properties of Materials
ASTM G32-16(2021)e1 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM D6874-03(2009)e1 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
ASTM D6874-12 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
ASTM E756-05(2017) Standard Test Method for Measuring Vibration-Damping Properties of Materials
ASTM D4292-92(1997) Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
ASTM D4292-17 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
ASTM F2187-02(2019) Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly
ASTM D4728-01 Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D4728-95 Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D4728-06 Standard Test Method for Random Vibration Testing of Shipping Containers
ASTM D7764-20 Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers
ASTM D4728-06(2012) Standard Test Method for Random Vibration Testing of Shipping Containers

HU-MSZT, Conditions for vibration testing

MSZ 18163/2-1983

Professional Standard - Light Industry, Conditions for vibration testing

QB/T 1178-1991 Test method for vibration of industrial sewing machines
QB/T 1178-2006 Industrial sewing machine Testing method of vibration

American National Standards Institute （ANSI), Conditions for vibration testing

ANSI/TIA/EIA 455-11C-2002 Vibration Test Procedure for Fiber Optic Components and Cables
ANSI/ASA S2.26-2001 Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment

International Electrotechnical Commission (IEC), Conditions for vibration testing

IEC 60642:1979 Piezoelectric ceramic resonators and resonator units for frequency control and selection. Chapter I: Standard values and conditions. Chapter II: Measuring and test conditions
IEC 60721-2-6:1990 Classification of environmental conditions; part 2: environmental conditions appearing in nature; earthquake vibration and shock
IEC 60642:1979/AMD1:1992 Amendment 1 - Piezoelectric ceramic resonators and resonator units for frequency control and selection - Chapter I: Standard values and conditions - Chapter II: Measuring and test conditions
IEC TR 62131-1:2011 Environmental conditions - Vibration and shock of electrotechnical equipment - Part 1: Process for validation of dynamic data
IEC 60721-2-9:2014 Classification of environmental conditions - Part 2-9: Environmental conditions appearing in nature - Measured shock and vibration data - Storage, transportation and in-use
IEC TR 62131-8:2022 Environmental conditions – Vibration and shock of electrotechnical equipment - Part 8: Transportation by ship
IEC 62047-32:2019 Semiconductor devices - Micro-electromechanical devices - Part 32: Test method for the nonlinear vibration of MEMS resonators
IEC 60721-2-6:2022/COR1:2023 Corrigendum 1 - Classification of environmental conditions - Part 2-6: Environmental conditions appearing in nature - Earthquake vibration and shock
IEC 60068-2-47:2005 Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
IEC 61300-2-1:2009 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)
IEC TR 62131-7:2020 Environmental conditions – Vibration and shock of electrotechnical equipment - Part 7: Transportation by rotary wing aircraft
IEC 61337-1-2:1999 Filters using waveguide type dielectric resonators - Part 1-2: Test conditions
IEC TR 62131-6:2017 Environmental conditions - Vibration and shock of electrotechnical equipment - Part 6: Transportation by propeller aircraft
IEC TR 62131-3:2011 Environmental conditions - Vibration and shock of electrotechnical equipment - Part 3: Equipment transported in rail vehicles
IEC TR 62131-4:2011 Environmental conditions - Vibration and shock of electrotechnical equipment - Part 4: Equipment transported in road vehicles

Electronic Industrial Alliance (U.S.), Conditions for vibration testing

EIA RS-186-8E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 8: VIBRATION, HIGH FREQUENCY

ECIA - Electronic Components Industry Association, Conditions for vibration testing

186-8E-1978 Passive Electronic Component Parts@ Test Methods for; Method 8: Vibration@ High Frequency
186-7E-1978 Passive Electronic Component Parts@ Test Methods for; Method 7: Vibration Fatigue Test (Low Frequency@ 10 to 55 Hertz)
EIA-364-28D-1999 TP-28D Vibration Test Procedure for Electrical Connectors and Sockets
EIA-364-28F-2011 (R2017) TP-28F Vibration Test Procedure for Electrical Connectors and Sockets
364-28C-1997 TP-28C Vibration Test Procedure for Electrical Connectors and Sockets
EIA-364-28F-2011 TP-28F Vibration Test Procedure for Electrical Connectors and Sockets
EIA/ECA-364-28E-2006 TP-28E Vibration Test Procedure for Electrical Connectors and Sockets

Japanese Industrial Standards Committee (JISC), Conditions for vibration testing

JIS E 4031 AMD 1:2012 Rolling stock equipment -- Shock and vibration tests (Amendment 1)
JIS B 0906:1998 Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- General guidelines
JIS C 60721-2-9:2015 Classification of environmental conditions -- Part 2-9: Environmental conditions appearing in nature -- Measured shock and vibration data -- Storage, transportation and in-use
JIS A 8317-1:2010 Earth-moving machinery -- Determination of sound power level -- Dynamic test conditions
JIS S 1018:1995 Test methods of vibration and earthquake tumbling for furniture
JIS B 6152:2008 Machine tools -- Test conditions for self-centring, manually-operated chucks with one-piece jaws
JIS B 7758:1995 Electrodynamic test equipment for generating vibration -- Methods of describing equipment characteristics
JIS A 8317-1:2001 Acoustics -- Measurement of exterior noise emitted by earth-moving machinery -- Dynamic test conditions

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Conditions for vibration testing

GB/T 34898-2017 Micro electromechanical system technology—Test method for the nonlinear vibration of the MEMS resonant sensitive element
GB/T 33511-2017 Mechanical vibration—Evaluation of measurement results from dynamic tests and investigation on bridges
GB/T 22159.5-2017 Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion

Standard Association of Australia （SAA）, Conditions for vibration testing

IEC 60721-2-6:2022 Classification of environmental conditions — Part 2-6: Environmental conditions appearing in nature — Earthquake vibration and shock
AS ISO 6395:2020 Earth-moving machinery — Determination of sound power level — Dynamic test conditions

Professional Standard - Nuclear Industry, Conditions for vibration testing

EJ/T 1188-2005 Vibration monitoring of internal structures in pressurized water reactor of nuclear power plants

CEN - European Committee for Standardization, Conditions for vibration testing

EN 16929:2018 Test methods - Timber floors - Determination of vibration properties
EN 2591-403:2018 Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
PREN 16929-2015 Test methods - Timber flooring systems - Determination of vibration properties
EN ISO 10846-3:2002 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion

European Committee for Electrotechnical Standardization（CENELEC）, Conditions for vibration testing

EN 60721-2-9:2014 Classification of environmental conditions - Part 2-9: Environmental conditions appearing in nature - Measured shock and vibration data - Storage, transportation and in-use
EN IEC 61300-2-1:2023 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal)

PH-BPS, Conditions for vibration testing

PNS ISO 6395:2021 Earth-moving machinery - Determination of sound power level - Dynamic test conditions

未注明发布机构, Conditions for vibration testing

BS ISO 6395:2008(2009) Earth - moving machinery — Determination of sound power level — Dynamic test conditions
BS EN 60255-21-1:1996(1999) Electrical relays — Part 21 : Vibration, shock, bump and seismic tests on measuring relays and protection equipment — Section 1 : Vibration tests (sinusoidal)
BS EN ISO 10846-3:2002(2003) Acoustics and vibration — Laboratory measurement of vibro - acoustic transfer properties of resilient elements — Part 3 : Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion

国家能源局, Conditions for vibration testing

NB/SH/T 0987-2019 High-frequency linear vibration (SRV) standard test piece wear volume determination method

ZA-SANS, Conditions for vibration testing

SANS 16063-31:2009 Methods for the calibration of vibration and shock transducers Part 31: Testing of transverse vibration sensitivity

NO-SN, Conditions for vibration testing

NS 5655-1980 Test conditions for precision lathes - Testing of accuracy
NS 5654-1980 Test conditions for standard lathes - Testing of the accuracy

工业和信息化部, Conditions for vibration testing

SJ/T 11572-2016 Mechanical vibration test method for crystalline silicon photovoltaic modules in transportation environment

Electronic Components, Assemblies and Materials Association, Conditions for vibration testing

EIA_ECA-364-28E-2006 TP-28E Vibration Test Procedure for Electrical Connectors and Sockets
ECA EIA-364-28F-2011 TP-28F Vibration Test Procedure for Electrical Connectors and Sockets

Professional Standard - Aerospace, Conditions for vibration testing

QJ 1288-1987 Calibration and test methods for vibration and shock sensors

Military Standard of the People's Republic of China-General Armament Department, Conditions for vibration testing

GJB 3236-1998 Calibration and Testing Methods for Vibration and Shock Sensors

BR-ABNT, Conditions for vibration testing

ABNT NBR ISO 6396:2011 Machinery - Determination of the level of emission sound pressure at operator position - Dynamic test conditions

Professional Standard - Electricity, Conditions for vibration testing

DL/T 849.6-2004 General technical specification of test instruments used for power equipments Part 6: high voltage resonant test system
DL/T 849.6-2016 General Specifications for Special Test Instruments for Power Equipment Part 6: High Voltage Resonance Test Device

National Aeronautics and Space Administration (NASA), Conditions for vibration testing

NASA-CR-1316-1969 A theoretical analysis of the free vibration of discretely stiffened cylindrical shells with arbitrary end conditions

YU-JUS, Conditions for vibration testing

JUS U.J6.234-1983 Testing of plastics andclamped laminatedsystems. Bending vibration test General principles
JUS U.J6.236-1983 Testing of plastics and damped laminated systems.Bending vibration test;determination of complex modulus of elasticity
JUS U.J6.238-1983 Testing of plastictics and damped laminated systems. Bending vibration test. Determination ofdynamic. Values of damped laminated systems
JUS N.C0.030-1980 Testing offlacible cords and cables. General testing conditions
JUS N.M6.001-1985 Hand-heldmotor-operated electric tools. Safety requirements. General conditions and tests

Professional Standard - Railway, Conditions for vibration testing

TB/T 3184-2007 Technical specification of detection euquipment for dynamic load testing of locomotive

邮电部, Conditions for vibration testing

YD/T 615-1993 64, 2048, 8448, 34368kbit/s phase jitter tester technical conditions

(U.S.) Telecommunications Industries Association , Conditions for vibration testing

TIA-455-199-2002 FOTP-199 In-Line Polarization Crosstalk Measurements Method for Polarization-Maintaining Optical Fibers, Components, and Systems
TIA-455-199-2002(2012) FOTP-199 In-Line Polarization Crosstalk Measurements Method for Polarization-Maintaining Optical Fibers, Components, and Systems

Indonesia Standards, Conditions for vibration testing

SNI 04-6186.21.1-2000 Electrical relays. Part 21: Vibration, shock and seismic testing on measuring relays and protection equipment - Section 1: Seismic testing

SE-SIS, Conditions for vibration testing

SIS SS-ISO 6899:1992 Acceptance conditions of open front mechanical power presses — Testing of the accuracy

AT-OVE/ON, Conditions for vibration testing

OVE EN IEC 60721-2-6:2021 Classification of environmental conditions - Part 2-6: Environmental conditions appearing in nature. Earthquake vibration and shock (IEC 104/900/CDV) (english version)

BE-NBN, Conditions for vibration testing

NBN-ISO 6395:1992 Acoustics - Measurement of exterior noise emitted by earth-moving machinery - Dynamic test conditions
NBN E 48-101-1988

US-FCR, Conditions for vibration testing

FCR COE CRD-C 521-81-1981 HANDBOOK FOR CONCRETE AND CEMENT STANDARD TEST METHOD FOR FREQUENCY AND AMPLITUDE OF VIBRATORS FOR CONCRETE

U.S. Military Regulations and Norms, Conditions for vibration testing

ARMY ADS-27 A-SP-2006 REQUIREMENTS FOR ROTORCRAFT VIBRATION SPECIFICATIONS, MODELING AND TESTING

Fujian Provincial Standard of the People's Republic of China, Conditions for vibration testing

DB35/T 1151-2011 Test method for vibration and noise characteristics of cab of earth-moving machinery