ZH
RU
ES

Calorimeter Principle

Calorimeter Principle, Total:496 items.

In the international standard classification, Calorimeter Principle involves: Pharmaceutics, Linear and angular measurements, Analytical chemistry, Ergonomics, Quality, Thermodynamics and temperature measurements, Air quality, Electronic tubes, Aerospace electric equipment and systems, Plastics, Nuclear energy engineering, Water quality, Metrology and measurement in general, Fuels, Test conditions and procedures in general, Shipbuilding and marine structures in general, Optical equipment, Optics and optical measurements, Astronomy. Geodesy. Geography, Applications of information technology, Materials for aerospace construction, Construction industry, Particle size analysis. Sieving, Acoustics and acoustic measurements, Rotating machinery, Reinforced plastics, Electricity. Magnetism. Electrical and magnetic measurements, Natural gas, Vocabularies, Non-destructive testing, Protection against fire, Fluid storage devices, Components for electrical equipment, Earthworks. Excavations. Foundation construction. Underground works, Medical sciences and health care facilities in general, Surface treatment and coating, On-board equipment and instruments, Protection of and in buildings, Quantities and units, Physics. Chemistry, Coals, Heat treatment, Construction materials, Measurement of fluid flow, Crude petroleum, Petroleum products in general, Measurement of volume, mass, density, viscosity, Tobacco, tobacco products and related equipment, Refrigerating technology, Heat recovery. Thermal insulation, Products of the chemical industry, Internal combustion engines for road vehicles, Company organization and management, Environmental protection, Wastes, Installations in buildings, Industrial automation systems, Energy and heat transfer engineering in general, Heat pumps, Rubber, Bearings, Fluid power systems, Technical drawings, Glass, Welding, brazing and soldering, Agricultural machines, implements and equipment, Aerospace engines and propulsion systems, Electrical and electronic testing, Metalliferous minerals, Animal feeding stuffs, Radiation measurements, Postal services, Sugar. Sugar products. Starch, Ferrous metals, Leather technology, Occupational safety. Industrial hygiene.

工业和信息化部/国家能源局, Calorimeter Principle

JB/T 20185-2017 Pyrogen detector
JB/T 13176-2017 Differential Scanning Calorimeter

German Institute for Standardization, Calorimeter Principle

DIN 2271-1:1976 Pneumatic Length Measurement (Air Gauging); Principles, Methods
DIN EN ISO 23131:2023-01 Ellipsometry - Principles (ISO 23131:2021); German version EN ISO 23131:2022
DIN 51006:2005 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
DIN EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
DIN EN ISO 7726:2021-03 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN 51006:2023-03 Thermal analysis - Thermogravimetry - Principles / Note: Date of issue 2023-01-27*Intended as replacement for DIN 51006 (2005-07).
DIN 51900-1:2000-04 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods / Note: To be replaced by DIN 51900 (2022-06).
DIN 51900-1:2000 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods
DIN 51006:2005-07 Thermal analysis (TA) - Thermogravimetry (TG) - Principles / Note: To be replaced by DIN 51006 (2023-03) (in preparation).
DIN ISO 9335:2008 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:1995+Cor. 1:2005);English version of DIN ISO 9335:2008-04
DIN 51007:1994 Thermal analysis; differential thermal analysis; principles
DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).
DIN EN ISO 7726:2023-08 Ergonomics of the thermal environment - Instruments for measuring and monitoring physical quantities (ISO/DIS 7726:2023); German and English version prEN ISO 7726:2023 / Note: Date of issue 2023-06-30*Intended as replacement for DIN EN ISO 7726 (2021-03).
DIN ISO 9335:2015 Optics and photonics - Optical transfer function - Principles and procedures of measurement (ISO 9335:2012)
DIN 45630-1:1971 Physical and subjective magnitudes of sound
DIN 19265:2007 pH-/redox-measurement - pH-/redox measuring apparatus - Technical requirements
DIN 42026-2:1980-08 Permanent magnet segments; measuring principle
DIN 50989-1:2018 Ellipsometry - Part 1: Principles; Text in German and English
DIN 42026-2:1980 Permanent magnet segments; measuring principle
DIN EN ISO 7726:2021 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997); German version EN ISO 11358:1997
DIN 2384:2020-10 Thermal energy storage - Terminology, requirements, parameters, test principles
DIN 19569-10:2017 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 10: Specific principles for the equipment for thermal sludge drying
DIN 19569-10:2001 Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 10: Specific principles for the equipment for thermal sludge drying
DIN 12790:1979 Laboratory glassware; hydrometers, principles of construction and adjustment
DIN 51007:2019 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
DIN 51007:2019-04 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
DIN EN ISO 7345:1996 Thermal insulation - Physical quantities and definitions (ISO 7345:1987); German version EN ISO 7345:1995
DIN IEC 61577-1:2007 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 1: General principles (IEC 61577-1:2006)
DIN EN 63144:2018 Industrial Process Control Devices - Thermographic Imagers - Metrological Characterization and Calibration of Thermographic Imagers (IEC 65B/1109/CD:2017); Text in German and English
DIN 4107-1:2011 Geotechnical measurements - Part 1: Principles
DIN 19223:2002 Control technology - Rules for the designation of measuring instruments
DIN EN ISO 9288:1996 Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989); German version EN ISO 9288:1996
DIN 51350-1:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN EN ISO 384:2016-05 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015); German version EN ISO 384:2015
DIN EN 14012:2009 Postal services - Quality of service - Complaints handling principles; English version of DIN EN 14012:2009-04
DIN EN 14012:2020 Postal services - Quality of service - Complaints handling principles
DIN EN 14012:2020-06 Postal services - Quality of service - Complaints handling principles; German version EN 14012:2019
DIN 5485:1986-08 Principles of terminology for physical quantities; composition of terms with adjectives and substantives
DIN EN 61010-2-061:2004 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (IEC 61010-2-061:2003); German version EN 61010-2-06
DIN EN 835:1995-04 Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without electrical energy supply based on the evaporation principle; German version EN 835:1994
DIN EN ISO 80000-10:2020-02 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019); German version EN ISO 80000-10:2019

Association Francaise de Normalisation, Calorimeter Principle

NF EN ISO 23131:2022 Ellipsométrie - Principes
NF X35-202:1994 Thermal environments. Instruments and methods for measuring physical quantities.
NF X35-202*NF EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities
FD S99-513*FD ISO/TR 21582:2021 Pyrogenicity - Principles and methods for pyrogen testing of medical devices
FD ISO/TR 21582:2021 Pyrogénicité - Principes et méthodes d'essai pour la recherche des pyrogènes sur les dispositifs médicaux
NF S10-041*NF ISO 9335:2013 Optics and photonics - Optical transfer function - Principles and procedures of measurementt
NF B35-300*NF EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments
NF EN ISO 384:2016 Matériels de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques
NF EN 61947-2:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 2 : projecteurs à résolution variable
NF Z52-018:2005 Geographic information - Quality principles.
NF EN 61947-1:2004 Projection électronique - Mesure et documentation des critères principaux de performance - Partie 1 : projecteurs à résolution fixe
NF E60-150:1965 Machine tools. Principles of workshop metrology.
NF P94-105:2012 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie variable - Principe et méthode d'étalonnage du pénétromètre - Exploitation des résultats - Interprétation
NF C42-123:1997 Electrical measuring instruments - Identification of thermocouples
NF X02-209:1993 Quantities and units. Atomic and nuclear physics.
NF A02-053:2014 Heat treatment - Control of quality
NF P94-063:2011 Sols : reconnaissance et essais - Contrôle de la qualité du compactage - Méthode au pénétromètre dynamique à énergie constante - Principe et méthode d'étalonnage des pénétrodensitographes - Exploitation des résultats - Interprétation
NF V37-025*NF ISO 9512:2019 Cigarettes - Determination of ventilation - Definitions and measurement principles
NF P50-740:1996 Thermal insulation. Physical quantities and definitions.
NF EN 14049:2004 Intensité d'apport d'eau - Principes de calcul et méthodes de mesure
NF T46-050:2013 Rubber - Differential scanning calorimetry (DSC) - General principles
NF T46-050:2015 Rubber - Differential scanning calorimetry (DSC) - General principles
NF EN ISO 15831:2004 Vêtements - Effets physiologiques - Mesurage de l'isolation thermique à l'aide d'un mannequin thermique
NF EN ISO 23674:2022 Cosmétiques - Méthodes d'analyse - Dosage direct des traces de mercure dans les cosmétiques par décomposition thermique et spectrométrie d'absorption atomique (analyseur de mercure)
NF P50-743:1996 Thermal insulation. Mass transfer. Physical quantities and definitions.
NF U51-470*NF EN 14049:2004 Water application intensity - Calculation principles and measurement methods
NF EN ISO 9000:2015 Systèmes de management de la qualité - Principes essentiels et vocabulaire
NF P50-742*NF EN ISO 9288:1996 Thermal insulation. Heat transfer by radiation. Physical quantities and definitions.
NF S10-041:1998 Optics and photonics - Optical transfer function - Principles and procedures of measurement.
NF Z17-006*NF EN 14012:2009 Postal services - Quality of service - Complaints handling principles
NF Z17-006*NF EN 14012:2019 Postal services - Quality of service - Complaints handling principles
NF T51-226-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1 : general principles
FD P50-708*FD CEN/TR 14613:2006 Thermal performance of building materials and components - Principles for the determination of the thermal properties of moist materials and components
NF X02-300-10:2013 Quantities and units - Part 10: atomic and nuclear physics
NF V37-025:2003 Cigarettes - Determination of ventilation - Definitions and measurement principles.
NF V37-025:1993 Cigarettes. Determination of ventilation. Definitions and measurment principles.
NF X02-300-10*NF EN ISO 80000-10:2019 Quantities and units - Part 10 : atomic and nuclear physics
NF X44-051:1978 Dépoussiéreurs - Classification et principes de mesure de leurs caractéristiques
NF EN 14012:2019 Services postaux - Qualité du service - Principes de traitement des réclamations
NF EN ISO 80000-10:2019 Grandeurs et unités - Partie 10 : physique atomique et nucléaire
NF ISO 9512:2019 Cigarettes - Détermination du taux de ventilation - Définitions et principes de mesurage
NF X35-207:1993 EVALUATION OF THERMAL STRAIN BY PHYSIOLOGICAL MEASUREMENTS.

VN-TCVN, Calorimeter Principle

TCVN 6164-1996 Principles for the establishment of hierarchy schemes for measuring instruments
TCVN 4057-1985 System of quality characteristics of construction products.Basic principles

Danish Standards Foundation, Calorimeter Principle

DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities
DS/EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
DS/ISO/TR 21582:2021 Pyrogenicity – Principles and methods for pyrogen testing of medical devices
DS/EN ISO 19113:2005 Geographic information - Quality principles
DS/EN 4383:2007 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
DS/EN 4384:2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock
DS/EN ISO 7345:1997 Thermal insulation - Physical quantities and definitions
DS/EN ISO 9288:1997 Thermal insulation - Heat transfer by radiation - Physical quantities and definitions
DS/ISO 31/9:1984 Quantities and units atomic and nuclear physics
DS/EN 14049:2004 Water application intensity - Calculation principles and measurement methods
DS/EN 14012:2009 Postal services - Quality of service - Complaints handling principles
DS/EN ISO 11399:2001 Ergonomics of the thermal environment - Principles and application of relevant International Standards
DS/ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
DS/EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics

CZ-CSN, Calorimeter Principle

CSN ISO 7726:1993 Thermal environments. Instruments and methods for measuring physical quantities
CSN IEC 617-8:1993 Graphical symbols for diagrams. Part 8: Measuring instruments. lamps and signalling devices
CSN 01 1308-1986 Quantities and units of atotnic and nuclear physics
CSN 72 6040-1985 Refractory materials and produts. Determination of thermal conductivity by hot wire method.
CSN EN 50 020-1992 Electrical apparatus for potentially explosive atmospheres. Intrinsic safety ?i"
CSN EN ISO 9000 OPRAVA 1:2001
CSN 05 0211-1992 Heat and mechanical treatment of welded joints in unalloyed and low alloy steels. General principles

RO-ASRO, Calorimeter Principle

STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities
STAS 11071/21-1990 Hierarchy of measuring instruments. Block diagram of hierarchy of measuring instrument for thermal neutrons flux density
SR ISO 31-9:1995 Quantities and units - Part 9: Atomic and nuclear physics

International Organization for Standardization (ISO), Calorimeter Principle

ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
ISO/TR 21582:2021 Pyrogenicity — Principles and methods for pyrogen testing of medical devices
ISO/DIS 7726 Ergonomics of the thermal environment — Instruments for measuring and monitoring physical quantities
ISO 9335:1995 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
ISO 23131:2021 Ellipsometry — Principles
ISO 8322-1:1989 Building construction; measuring instruments; procedures for determining accuracy in use; part 1: theory
ISO 22290:2020 Non-destructive testing - Infrared thermographic testing - General principles for thermoelastic stress measuring method
ISO 19113:2002 Geographic information - Quality principles
ISO/TS 14934-4:2007 Fire tests - Calibration of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
ISO 9000:2005 Quality management systems - Fundamentals and vocabulary
ISO 9000:2015 Quality management systems - Fundamentals and vocabulary
ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests
ISO 15529:1999 Optics and optical instruments - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
ISO/FDIS 20431 Heat treatment — Control of quality
ISO 20431:2023 Heat treatment — Control of quality
ISO 31-9:1973 Title missing - Legacy paper document
ISO 31-9:1980 Quantities and units of atomic and nuclear physics
ISO 9288:1989 Thermal insulation; heat transfer by radiation; physical quantities and definitions
ISO 7345:1987 Thermal insulation; Physical quantities and definitions
ISO 7345:1985 Thermal insulation — Physical quantities and definitions
ISO/CD 14505-1:2023 Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 1: Principles and methods for assessment of thermal stress
ISO 31-9:1992 Quantities and units; part 9: atomic and nuclear physics
ISO/ASTM 51631:2002 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
ISO/ASTM 51631:2003 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
ISO/ASTM 51631:2013 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations
ISO 9346:1987 Thermal insulation - Mass transfer - Physical quantities and definitio
ISO 9512:2019 Cigarettes — Determination of ventilation — Definitions and measurement principles
ISO 15568:1998 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
ISO 10698:1994 Steel - Determination of antimony content - Electrothermal atomic absorption spectrometric method
ISO 23674:2022 Cosmetics — Analytical methods — Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
ISO 9110-1:2020 Hydraulic fluid power — Measurement techniques — Part 1: General measurement principles
ISO 80000-10:2009 Quantities and units - Part 10: Atomic and nuclear physics
ISO 31-9:1980/Amd 1:1985 Quantities and units of atomic and nuclear physics — Amendment 1
ISO 9512:2002 Cigarettes - Determination of ventilation - Definitions and measurement principles
ISO 9512:1993 Cigarettes; determination of ventilation; definitions and measurement principles
ISO 9886:1992 Evaluation of thermal strain by physiological measurements

ES-UNE, Calorimeter Principle

UNE-EN ISO 23131:2023 Ellipsometry - Principles (ISO 23131:2021)
UNE-EN ISO 384:2016 Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)
UNE-EN 14012:2021 Postal services - Quality of service - Complaints handling principles
UNE-EN ISO 23674:2023 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
UNE-EN ISO 80000-10:2021 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019)

RU-GOST R, Calorimeter Principle

GOST 4.136-1985 Product-quality index system. Thermophysical apparatus. Nomenclature of indices
GOST 21107.0-1975 Gas discharge devices. Methods of measurement of electrical parameters. General principles
GOST R 8.778-2011 State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles
GOST R 57928-2017 Polymer composites. Method of determining the rate of heat release during combustion, using a flow calorimeter, operating on the principle of thermocouple
GOST 14828-1969 Instruments for physical-chemical quantities measurement. Radiospectrometers. Terms
GOST ISO 9000-2011 Quality management systems. Fundamentals and vocabulary
GOST 8.586.1-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
GOST 33160-2014 Thermal insulation. Physical quantities and definitions
GOST R 55613-2013 Nondestructiv testing. Reference mesures for calibration of thicrness gauges of inorganic coverings. General
GOST R ISO 9000-2001 Quality management systems. Fundamentals and vocabulary
GOST R 8.654-2015 State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 56069-2014 Requirements for experts and specialists. Verification of measuring instruments. Basic principles
GOST R 56069-2018 Requirements for experts and specialists. Verifier of measuring instruments. General requirements
GOST 34249-2017 Feed, feed raw materials. Detection of mass fraction of chromium by electrothermal atom absorbtion spectrometric method
GOST R 8.654-2009 State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 51705.1-2001 Quality systems. HACCP principles for food products quality management. General requirements
GOST R 8.818-2013 State system for ensuring the uniformity of measurements. Virtual measuring instruments and virtual measuring systems. General principles

British Standards Institution (BSI), Calorimeter Principle

BS EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
PD ISO/TR 21582:2021 Pyrogenicity. Principles and methods for pyrogen testing of medical devices
BS EN ISO 11357-1:2016 Plastics. Differential scanning calorimetry (DSC). General principles
BS EN ISO 11357-1:1997 Plastics - Differential scanning calorimetry (DSC) - General principles
BS EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - General principles
BS ISO 9335:1996 Optics and optical instruments - Optical transfer function - Principles and procedures of measurement
23/30450169 DC BS EN ISO 7726. Ergonomics of the thermal environment. Instruments for measuring and monitoring physical quantities
BS PD ISO/TR 21582:2021 Pyrogenicity. Principles and methods for pyrogen testing of medical devices
BS ISO 22290:2020 Non-destructive testing. Infrared thermographic testing. General principles for thermoelastic stress measuring method
BS 4877:1972 Recommendations for general principles of nuclear reactor instrumentation
BS EN 12573-1:2000 Welded static non-pressurized thermoplastic tanks - General principles
BS 7850-1:1992 Total quality management - Guide to management principles
BS EN ISO 9000:2005 Quality management systems - Fundamentals and vocabulary
BS 874-1:1986 Methods for determining thermal insulating properties - Introduction, definitions and principles of measurement
18/30373552 DC BS EN 63144. Industrial Process Control Devices. Thermographic Imagers. Metrological Characterization and Calibration of Thermographic Imagers
BS EN ISO 80000-10:2013 Quantities and units. Atomic and nuclear physics
PD IEC TR 61340-1:2012+A1:2020 Electrostatics. Electrostatic phenomena. Principles and measurements
BS EN ISO 80000-10:2019 Quantities and units - Atomic and nuclear physics
BS EN ISO 11358-1:2022 Plastics. Thermogravimetry (TG) of polymers - General principles
BS EN ISO 9288:1996 Thermal insulation - Heat transfer by radiation - Physical quantities and definitions
BS EN ISO 23674:2022 Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
BS ISO 80000-10:2010 Quantities and units. Atomic and nuclear physics
BS ISO 18669-2:2005 Internal combustion engines - Pistons pins - Inspection measuring principles
BIP 2187-2011 Energy Management Principles and Practice. Second edition
BS ISO 18669-2:2020 Tracked Changes. Internal combustion engines. Piston pins. Inspection measuring principles
BS ISO 5660-1:2015+A1:2019 Reaction-to-fire tests. Heat release, smoke production and mass loss rate - Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
BS EN ISO 11358-1:2014 Plastics. Thermogravimetry (TG) of polymers. General principles
BS EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles
BS ISO 1132-2:2001 Rolling bearings. Tolerances - Measuring and gauging principles and methods
BS ISO 9110-1:2020 Hydraulic fluid power. Measurement techniques - General measurement principles
BS EN ISO 9346:1996 Thermal insulation - Mass transfer - Physical quantities and definitions
BS EN ISO 9346:2008 Hygrothermal performance of buildings and building materials. Physical quantities for mass transfer. Vocabulary
BS EN ISO 7345:1996 Thermal insulation - Physical quantities and definitions
BS EN 14049:2003(2011) Water application intensity - Calculation principles and measurement methods
BS EN 14049:2003 Water application intensity - Calculation principles and measurement methods
BS ISO 15529:2010 Optics and photonics. Optical transfer function. Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
BS EN 61010-2-061:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
BS EN 61010-2-051:2015 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring
BS EN 61010-2-061:2003 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization
PD ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
22/30454444 DC BS ISO 20431. Heat treatment. Control of quality
BS EN 14012:2008 Postal services - Quality of service - Complaints handling principles
BS EN 14012:2010 Postal services. Quality of service. Complaints handling principles
BS EN ISO 11212-4:1997 Starch and derived products - Heavy metals content - Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization
BS EN ISO 11212-3:1997 Starch and derived products. Heavy metals content. Determination of lead content by atomic absorption spectrometry with electrothermal atomization
BS EN 15267-1:2009 Air quality - Certification of automated measuring systems - Part 1: General principles
BS ISO 15568:1998 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
BS ISO 15568:1999 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
PD ISO/TS 5660-5:2020 Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
BS ISO 9512:2003 Cigarettes - Determination of ventilation - Definitions and measurement principles

AT-ON, Calorimeter Principle

ONORM EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)
OENORM EN ISO 7726:2021 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)
ONORM M 5875-2000 Equipment of municipal sewage treatment plants with in situ measuring instruments for process control
ONORM E 1008-1987 Graphical symbols jor diagrams; symbols for measuring Instruments, lamps and signalling devices
ONORM M 5871-1998 Equipment of drinking water treatment plants with in situ measuring instruments
ONORM M 7500 Teil.1-1980 Heat requirements for buildings; principles

国家市场监督管理总局、中国国家标准化管理委员会, Calorimeter Principle

GB/T 40233-2021 Ergonomics of the thermal environment—Instruments for measuring physical quantities
GB/T 40741-2021 Quality requirements for post welding heat treatment

未注明发布机构, Calorimeter Principle

BS EN ISO 7726:2001(2002) Ergonomics of the thermal environment — Instruments for measuring physical quantities
SAE AMS2772G-2016 Heat Treatment of Aluminum Alloy Raw Materials
BS EN ISO 19113:2005 Geographic information — Quality principles
ISO 9335:1995/Cor 1:2005 Optical and Optical Instruments Light Transfer Function Measurement Principles and Procedures Technical Corrigendum 1
BS EN 835:1995(1999) Heat cost allocators for the determination of the consumption of room heating radiators — Appliances without an electrical energy supply, based on the evaporation principle
DIN EN ISO 9346:1996 Thermal insulation — Mass transfer — Physical quantities and definitions
BS ISO 5660-1:2015+A1:2019(2021) Reaction - to - fire tests — Heat release, smoke production and mass loss rate Part 1 : Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)

HU-MSZT, Calorimeter Principle

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Calorimeter Principle

ASHRAE FUNDAMENTALS SI CH 8-1993 Physiological Principles and Thermal Comfort
ASHRAE FUNDAMENTALS IP CH 8-1993 Physiological Principles and Thermal Comfort
ASHRAE 41.9-2000 Calorimeter Test Methods for Mass Flow Measurements of Volatile Refrigerants
ASHRAE 4521-2002 In Situ Measurement of Ground Thermal Conductivity: A Duch Perspective
ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 4486-2001 Measureing Principles for the Determination of Ice Concentration in Ice Slurry (RP-1166)
ASHRAE FUNDAMENTALS SI CH 25-2009 HEAT@ AIR@ AND MOISTURE CONTROL IN BUILDING ASSEMBLIES—FUNDAMENTALS
ASHRAE FUNDAMENTALS SI CH 25-2013 Heat@ Air@ and Moisture Control In Building Assemblies—Fundamentals

Lithuanian Standards Office , Calorimeter Principle

LST EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)
LST EN 4384-2007 Aerospace series - Heat resisting alloy NI-CH1303 (NiCo20Cr20Mo5Ti2Al) - Non heat treated - Remelting stock
LST EN 4383-2007 Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock
LST EN ISO 19113:2005 Geographic information - Quality principles (ISO 19113:2002)
LST EN 14049-2004 Water application intensity - Calculation principles and measurement methods
LST EN 14012-2009 Postal services - Quality of service - Complaints handling principles
LST EN ISO 9288:1999 Thermal insulation - Heat transfer by radiation - Physical quantities and definitions (ISO 9288:1989)
LST EN ISO 7345:2003 Thermal insulation - Physical quantities and definitions (ISO 7345:1987)

Society of Automotive Engineers (SAE), Calorimeter Principle

SAE AIR885-1965 The Spark Calorimeter
SAE AIR885-1994 THE SPARK CALORIMETER
SAE AMS-H-6875B-2019 Heat Treatment of Steel Raw Materials
SAE AMS-H-6875A-2006 Heat Treatment of Steel Raw Materials
SAE AMS-H-6875C-2020 Heat Treatment of Steel Raw Materials
SAE AMS2761-2020 Heat Treatment of Steel Raw Materials
SAE AMS2772D-2007 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS-H-6875B-2010 Heat Treatment of Steel Raw Materials
SAE AMS2772E-2008 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772F-2011 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772C-2002 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772H-2023 Heat Treatment of Aluminum Alloy Raw Materials
SAE AIR1168/5-1990 Aerothermodynamic Test Instrumentation and Measurement
SAE AIR1168/5A-2011 Aerothermodynamic Test Instrumentation and Measurement
SAE AIR1168/5-2006 Aerothermodynamic Test Instrumentation and Measurement
SAE AMS4534C-2013 Copper-Beryllium Alloy, Bars and Rods 98Cu 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)
SAE J1589-1992 Internal Combustion Engines - Piston Rings - Inspection Measuring Principles

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Calorimeter Principle

GB/T 17471-1998 Principles for providing of monitoring and measuring instruments of energy in boiler heating network system
GB/T 11465-1989 Temperature profile for electronic measuring instruments
GB 11465-1989 Thermal Profiles for Electronic Measuring Instruments
GB/T 21337-2008 Geographic information .Quality principles
GB/T 13163.1-2009 Radiation protection instrumentation.Radon and radon decay product measuring instruments.Part 1:General principles
GB 11515-1989 Diagnostic criteria and principles of management of metal fumr fever
GB/T 30825-2014 Pyrometry for heat treatment
GB 3102.9-1993 Quantities and units of atomic and nuclear physics
GB/T 12809-1991 Laboratory glassware--Principles of design and construction of volumetric glassware
GB/T 12809-2015 Principles of design and construction of laboratory glassware glass measuring vessels
GB/T 32541-2016 Quality control system for heat treatment
GB/T 27761-2011 Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers
GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers
GB/T 19610-2004 Cigarettes-Determination of ventilation-Definitions and measurement principles
GB/T 11186.1-1989 Methods for measuring the colour of paint films--Part 1:Principles
GB 11186.1-1989 The measurement method of the color of the coating film, the first part of the principle

Korean Agency for Technology and Standards (KATS), Calorimeter Principle

KS C IEC 60231:2012 General principles of nuclear reactor instrumentation
KS C IEC 60231D-2012(2017) Fourth supplement：Principles of instrumentation for pressurized water reactors
KS C IEC 60231-2012(2022) General principles of nuclear reactor instrumentation
KS B ISO 9335:2011 Optics and optical instruments-Optical transfer function-Principles and procedures of measurement
KS B ISO 9335-2016(2021) Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS B ISO 9335:2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS C IEC 60231D-2012(2022) Fourth supplement：Principles of instrumentation for pressurized water reactors
KS M ISO 11357-1:2011 Plastics-Differential scanning calorimetry(DSC)-Part 1:General principles
KS M ISO 11357-1:2016 Plastics－Differential scanning calorimetry(DSC)－Part 1：General principles
KS X ISO 19113-2011(2016) Geographic information－Quality principles
KS C IEC 60231D:2012 Fourth supplement:Principles of instrumentation for pressurized water reactors
KS A 4054-2005 Radiographic image quality indicators for non-destructive testing-Principles and identification
KS Q ISO 9000:2007 Quality management systems-Fundamentals and vocabulary
KS H ISO 9512-2013(2018) Cigarettes－Determination of ventilation－Definitions and measurement principles
KS R 1122-2014 Measuring principles relating to piston ring of internal combustionengine for automobiles
KS M ISO 11358:2006 Plastics－Thermogravimetry(TG) of polymers－General principles
KS M ISO 11359-1:2007 Plastics-Thermomechanical analysis(TMA)-Part 1:General principles
KS M ISO 11359-1:2015 Plastics－Thermomechanical analysis(TMA)－Part 1：General principles
KS C IEC 60231A-2012(2022) General principal of nuclear reactor instrumentation－First supplement to publication 60231(1967)
KS E ISO 15247:2012 Zinc sulfide concentrates-Determination of silver content-Acid dissolution and flame atomic absorption spectrometric method
KS A ISO 31-9:2012 Quantities and units－Part 9：Atomic and nuclear physics
KS A ISO 31-9-2001(2011) Quantities and units－Part 9：Atomic and nuclear physics
KS R 1122-1999(2009) Measuring principles relating to piston ring of internal combustionengine for automobiles
KS H ISO 9512:2021 Cigarettes — Determination of ventilation —Definitions and measurement principles
KS B ISO 9110-1-2006(2011) Hydraulic fluid power－Measurement techniques－Part 1：General measurement principles
KS L ISO 384:2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
KS A ISO 80000-10:2012 Quantities and units-Part 10:Atomic and nuclear physics
KS H ISO 9512:2008 Cigarettes-Determination of ventilation-Definitions and measurement principles
KS H ISO 9512:2013 Cigarettes-Determination of ventilation-Definitions and measurement principles

SE-SIS, Calorimeter Principle

SIS SS IEC 617-8:1986 Graphical symbols for diagrams - Measuring instruments, lamps and signalling devices
SIS SS IEC 231:1983 Nuclear instrumentation - General principles of nuclear reactor instrumentation
SIS SEN 01 27 11-1968 Symbols for electrical diagrams Recording and reproducing apparatus and devices
SIS SS 01 61 78-1978 Quantities and units. Atomic and nuclear physics
SIS SS 02 42 01-1988 Thermal insulation - Physical quantities - Terminology

AENOR, Calorimeter Principle

UNE-EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities. (ISO 7726:1998)
UNE 32105:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY THE CALORIMETER BOMB METHOD.
UNE 32006:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY AUTOMATIC CALORIMETER.
UNE-EN 14049:2005 Water application intensity - Calculation principles and measurement methods
UNE-EN 14012:2009 Postal services - Quality of service - Complaints handling principles
UNE-EN ISO 9288:1996 THERMAL INSULATION. HEAT TRANSFER BY RADIATION. PHYSICAL QUANTITIES AND DEFINITIONS (ISO 9288:1989).
UNE-EN ISO 7345:1996 THERMAL INSULATION. PHYSICAL QUANTITIES AND DEFINITIONS. (ISO 7345:1987).

Group Standards of the People's Republic of China, Calorimeter Principle

T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
T/CIS 17007-2023 General technical specification for adiabatic accelerating rate calorimeter
T/CMA YJ044-2020 Natural gas calorific value sound and light measuring instrument
T/CCAS 018-2021 Determination of calorific value of low thermal value raw fuel for cement
T/GDATCM 0015-2022 Principles in Quality Management for Medicinal Animals Feeding
T/GDATCM 0011-2021 Guiding principles for quality management of traditional Chinese medicinal materials production

Professional Standard-Ships, Calorimeter Principle

CB 1085.5-1989 Man-hour quota heat treatment for instrumentation manufacturing

KR-KS, Calorimeter Principle

KS B ISO 9335-2016 Optics and optical instruments－Optical transfer function－Principles and procedures of measurement
KS H ISO 9512-2021 Cigarettes — Determination of ventilation —Definitions and measurement principles
KS L ISO 384-2021 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments

GM Europe, Calorimeter Principle

GME QS 104100-1963 Vergtungsstahl Heat Treatable Steel (Formerly Opel 1041)
GME QS 103600-1979 Vergtungsstahl Heat Treatable Steel (Formerly Opel 1036) English Translation Available
GME QS 104600-1987 Vergtungsstahl Heat Treatable Steel (Formerly Opel 1046) English Translation Available
GME QS 106000-1987 Vergtungsstahl Heat Treatable Steel (Formerly Opel 1060) English Translation Available
GME QS 104000-1987 Vergtungsstah Heat Treatable Steel (Formerly Opel 1040) English Translation Available
GME QS 514500-1986 Vergtungsstahl Heat Treatable Steel (Formerly OPEL 5145) English Translation Available
GME QS 413600-1992 Verg黷ungsstahl Heat Treatable Steel (Formerly OPEL 4136) English Translation Available

能源部, Calorimeter Principle

SY 7517-1992 Adiabatic calorimetric method for determination of specific heat capacity of crude oil

ZA-SANS, Calorimeter Principle

SANS 19113:2003 Geographic information - Quality principles
SANS 250:2003 Measurement management systems - Requirements for measurement processes and measuring equipment

ANSI - American National Standards Institute, Calorimeter Principle

N15.54-1988 Instrumentation - Radiometric Calorimeters Measurement Control Program (INMM)
INCITS/ISO 19113:2002 Geographic information Quality principles

European Committee for Standardization (CEN), Calorimeter Principle

EN ISO 23131:2022 Ellipsometry - Principles (ISO 23131:2021)
EN ISO 7726:2001 Ergonomics of the Thermal Environment - Instruments for Measuring Physical Quantities ISO 7726:1998; Supersedes EN 27726:1993
EN 27726:1993 Thermal Environments - Instruments and Methods for Measuring Physical Quantities (ISO 7726 : 1985) Superseded by EN ISO 7726:2001
EN 54-7:1988/A1:1988 Components of automatic fire detection systems; Part 7: Point type smoke detectors; Detectors using scattered light, transmitted light or ionization
EN 54-7:1988/prA2:1989 Components of automatic fire detection systems; part 7: point-type smoke detectors; detectors using scattered light, transmitted light or ionization
EN 54-7:1982/AC1:1984 Components of automatic fire detection systems; Part 7: Point type smoke detectors; Detectors using scattered light, transmitted light or ionization
EN ISO 7345:2018 Thermal performance of buildings and building components - Physical quantities and definitions
EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of Polymers - General Principles ISO 11358: 1997
EN 14012:2008 Postal services - Quality of service - Complaints handling principles
EN ISO 9288:2022 Thermal insulation - Heat transfer by radiation - Vocabulary (ISO 9288:2022)
EN ISO 11358-1:2022 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2022)
EN ISO 23674:2022 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
EN ISO 80000-10:2019 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2019)
EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics

IET - Institution of Engineering and Technology, Calorimeter Principle

PRINC MICROW MEAS-1993 Principles of Microwave Measurements
PRINC PLANAR NEAR-FLD ANT MEAS-2007 Principles of Planar Near-Field Antenna Measurements

Association of German Mechanical Engineers, Calorimeter Principle

VDI/VDE 2631 Blatt 1-2016 Form measurement - Principles
VDI/VDE 2631 Blatt 1-1999 Form measurement - Principles for the measurement of geometrical deviations
DVS 2308-2000 Constructional principles of components and workpieces for thermal spraying
VDI 3860 Blatt 1-2006 Measurement of landfill gas - Principles
VDI 4640 Blatt 1-2010 Thermal use of the underground - Fundamentals, approvals, environmental aspects
VDI/VDE 3511 Blatt 1-1996 Temperature measurement in industry - Principles and special methods of temperature measurement
VDI/VDE 3512 Blatt 1-2009 Temperature measurement for building automation - Basic principles
VDI/VDE 3512 Blatt 1-2017 Temperature measurement for building automation - Basic principles

International Commission on Illumination (CIE), Calorimeter Principle

CIE 18.2-1983 Basis of Physical Photometry (E)

American Society for Testing and Materials (ASTM), Calorimeter Principle

ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1770-95 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
ASTM E1770-95(2006) Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
ASTM E3137/E3137M-18 Standard Specification for Heat Meter Instrumentation
ASTM E3137/E3137M-17 Standard Specification for Heat Meter Instrumentation
ASTM E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1770-14 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-99 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers

Professional Standard - Petroleum, Calorimeter Principle

SY/T 7517-1994 Determination method of crude oil specific heat capacity adiabatic calorimetry
SY/T 6893-2012 Specification of heat treatment process for pipelining crude oil
SY 6893-2012 Process specification for heat treatment and transportation of crude oil pipeline
SY/T 0545-2012 Determination of thermal property parameters of the wax precipitation in crude oil.Test method by differential scanning calorimetry
SY 0545-2012 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
SY/T 0545-1995 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry

Indonesia Standards, Calorimeter Principle

SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers
SNI 04-1632-1989 Thermal protection system for rotating electrical machinery, Performance
SNI ISO 19113:2011 Geographic information - Quality principles
SNI 06-6989.39-2005 Water and wastewater - Part 39: Test methods of barium (Ba) content by atomic absorption spectrophotometers (AAS)
SNI 12-7181-2006 Test methods of total chromium content in leather by atomic absorption spectrophotometers (AAS)

SAE - SAE International, Calorimeter Principle

SAE AMS2772B-1999 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772A-1997 Heat Treatment of Aluminum Alloy Raw Materials
SAE AMS2772-1997 Heat Treatment of Aluminum Alloy Raw Materials (01 1997)

Professional Standard - Construction Industry, Calorimeter Principle

JG/T 329-2011 Apparantus of concrete thermal coefficient

CEN - European Committee for Standardization, Calorimeter Principle

EN ISO 19113:2005 Geographic information - Quality principles
PREN 14012-2018 Postal services - Quality of service - Complaints handling principles

American National Standards Institute （ANSI), Calorimeter Principle

ANSI/ISO/IEC 19113:2002(R2008) Geographic information — Quality principles
ANSI/INCITS/ISO 19113:2002 Geographic information - Quality principles
ANSI/INCITS/ISO/IEC 19113:2002 Geographic information - Quality principles
ANSI/ISO/ASQ Q9000:2005 Quality Management Systems - Fundamentals and Vocabulary
ANSI/ISO/IEC 19113:2002 Geographic information Quality principles Adopted by INCITS
ISO/DIS 22007-1:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ANSI/ASME Y14.43-2011 Dimensioning and Tolerancing Principles for Gages and Fixtures

Standard Association of Australia （SAA）, Calorimeter Principle

AS/NZS ISO 19113:2004 Geographic information - Quality principles

Japanese Industrial Standards Committee (JISC), Calorimeter Principle

JIS X 7113:2004 Geographic information -- Quality Principles
JIS Q 9000:2000 Quality management systems -- Fundamentals and vocabulary
JIS Q 9000:2006 Quality management systems -- Fundamentals and vocabulary
JIS Q 9000:2015 Quality management systems -- Fundamentals and vocabulary
JIS B 7995:1994 Automatic analysers for sulphur in crude oil and petroleum products
JIS B 8570-2:2007 Meters for cold water and hot water -- Part 2 : Measuring instruments used in transaction or certification
JIS B 8570-2:2009 Meters for cold water and hot water -- Part 2 : Measuring instruments used in transaction or certification
JIS B 8570-2:2013 Meters for cold water and hot water -- Part 2: Measuring instruments used in transaction or certification
JIS Z 8000-10:2015 Quantities and units -- Part 10: Atomic and nuclear physics
JIS Z 8202-9:2000 Quantities and units -- Part 9: Atomic and nuclear physics
JIS B 8570-2:2005 Meters for cold water and hot water -- Part 2: Specifications for legal measuring instruments
JIS Z 8000-10:2022 Quantities and units -- Part 10: Atomic and nuclear physics
JIS K 2279:2003 Crude petroleum and petroleum products -- Determination and estimation of heat of combustion

BE-NBN, Calorimeter Principle

NBN X 50-002-2-1989 Quality management and quality System elements - Guidelines
NBN X 02-109-1989 Quantities and units of atomic and nuclear physics
NBN X 02-109-1990

PL-PKN, Calorimeter Principle

PN T06513-02-1990 Measurement of redox potential value Industrial analyzers
PN-EN 14012-2019-11 P Postal services -- Quality of service -- Complaints handling principles
PN T06513-03-1989 Redox potential value Laboratory measuring instruments General reguirements and tests

Professional Standard - Hygiene , Calorimeter Principle

WS 216-2001 Diagnostic criteria and principle of management of dengue fever

Professional Standard - Military and Civilian Products, Calorimeter Principle

WJ 2290-1995 Verification Regulations for Differential Scanning Calorimeter

TH-TISI, Calorimeter Principle

TIS 9000-2007 Quality management systems.fundamentals and vocabulary
TIS 235.10-2013 Quantities and units.part 10: atomic and nuclear physics

National Metrological Verification Regulations of the People's Republic of China, Calorimeter Principle

JJG(建设) 0001-1992 Metrological Verification Regulation of Hot Ball shaped Anemometer

IN-BIS, Calorimeter Principle

IS 12257 Pt.1-1987

Military Standard of the People's Republic of China-General Armament Department, Calorimeter Principle

GJB 7944-2012 Technical procedures for troop repair of military thermal imaging sets
GJB 509A-1995 Heat treatment process quality control requirements
GJB 509-1988 Heat treatment process quality control specifications

Taiwan Provincial Standard of the People's Republic of China, Calorimeter Principle

CNS 11296-9-1985 Quantities and Units of Atomic and Nuclear Physics
CNS 11296.9-1985 Quantities and Units of Atomic and Nuclear Physics
CNS 14705-2007 Method of test for heat release rate for building materials - Cone calorimeter method
CNS 14705-2002 Method of test for heat release rate for building materials

IT-UNI, Calorimeter Principle

UNI 6888-1971

Professional Standard - Coal, Calorimeter Principle

MT/T 737-1997 Specification of verification for safe use of oxygen combustion bomb
MT/T 737-2007 Specification of verification for safe use of oxygen combustion bomb

American Society of Quality Control （ASQC), Calorimeter Principle

ASQ Q10012-2003 Measurement management systems Requirements for measurement processes and measuring equipment T810
ASQ Q9000-2005 Quality management systems - Fundamentals and vocabulary (T812E)
ASQ Q9000-2000 Quality Management Systems - Fundamentals and Vocabulary

TIA - Telecommunications Industry Association, Calorimeter Principle

TSB31-A-1992 Part 68 Rationale and Measurement Guidelines
TSB31-B-1998 Part 68 Rationale and Measurement Guidelines

国家技术监督局, Calorimeter Principle

GB/T 3102.9-1993 Quantities and units of atomic and nuclear

Professional Standard - Commodity Inspection, Calorimeter Principle

SN/T 2942-2011 Assessment of thermal oxidation stability of plastics.Differential scanning calorimetry
SN/T 3078.1-2012 Guide for assessing thermal stability of chemicals.Part 1:Methods of accelerating rate calorimetry

海关总署, Calorimeter Principle

SN/T 5240-2020 Cone calorimeter method for determination of heat release rate of imported and exported textiles

North Atlantic Treaty Organization Standards Agency, Calorimeter Principle

STANAG 4349-1995 MEASUREMENT OF THE MINIMUM RESOLVABLE TEMPERATURE DIFFERENCE (MRTD) OF THERMAL CAMERAS

CN-STDBOOK, Calorimeter Principle

图书 3-9126 Principles and practice of emergency management of agricultural product quality and safety

National Metrological Technical Specifications of the People's Republic of China, Calorimeter Principle

JJF(建材) 160-2019 Calibration specification for photothermal mirror reflectance measuring instrument
JJF(建材) 164-2020 Calibration specification for on-site photothermal parameter measuring instrument for architectural glass

API - American Petroleum Institute, Calorimeter Principle

API H00006-2001 Manual of Petroleum Measurement Standards - Draft Standard - Measurement of Crude Oil by Coriolis Meters

United States Navy, Calorimeter Principle

NAVY MS33741 NOTICE 2-1996 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741 VALID NOTICE 1-1991 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC
NAVY MS33741-1960 WIRING DIAGRAM - SENSITIVE INSTRUMENT SYSTEM WITH SEPARATE AMPLIFIER, 26 VOLTS, 400 CYCLES, SCHEMATIC

Professional Standard - Agriculture, Calorimeter Principle

空气和废气监测分析方法 3.4.2-2003 Part 3 Air Quality Monitoring Chapter 4 Air Quality Continuous Automatic Monitoring System (B) 2 Working Principle of Air Quality Continuous Automatic Monitoring Instrument
363药典三部-2020 Guiding principle 9203 Guiding principles for quality management of pharmaceutical microbiology laboratories
345药典四部-2020 9000 Guidelines 9203 Guidelines for Quality Management of Pharmaceutical Microbiology Laboratories
326药典四部-2015 9000 Guidelines 9203 Guidelines for Quality Management of Pharmaceutical Microbiology Laboratories

Professional Standard - Machinery, Calorimeter Principle

JB/T 10175-2008 Quality control requirement for heat treatment
JB/T 10175-2000 Quality control requirement for heat treatment

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Calorimeter Principle

GJB 509B-2008 Quality control for heat treatment process

Professional Standard - Aviation, Calorimeter Principle

HB 5354-1994 Heat treatment process quality control

(U.S.) Telecommunications Industries Association , Calorimeter Principle

TIA TSB31-B-1998 Part 68 Rationale and Measurement Guidelines

Canadian Standards Association (CSA), Calorimeter Principle

CSA ISO 9000-00-CAN/CSA:2000 Quality Management System- Fundamentals and Vocabularies

ESDU - Engineering Sciences Data Unit, Calorimeter Principle

ESDU 16002-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 2: Constant-Temperature Anemometry
ESDU 17009-2018 A Practical Guide to Turbulence and Flow Measurement by Thermal Anemometry (CTA)@ Laser-Doppler Anemometry (LDA) and Particle-Image Velocimetry (PIV) Part 4: Particle-Image Velocimetry

Professional Standard - Urban Construction, Calorimeter Principle

CJ/T 454-2014 General rule of equipment and management for water meter of water supply in city and town
CJ/T 3019-1993 General rules of equipment and management for metering devices of water supply quantity in cities and towns

International Electrotechnical Commission (IEC), Calorimeter Principle

IEC 61010-2-061:2018 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionizati

Professional Standard - Aerospace, Calorimeter Principle

QJ 1428-1988 Heat treatment furnace temperature control and measurement

Professional Standard - Tobacco, Calorimeter Principle

YC/T 158-2002 Cigarettes----Determination of ventilation----Definitions and measurement principles

Occupational Health Standard of the People's Republic of China, Calorimeter Principle

GBZ 215-2009 Medical examination and management principle for the overexposed individuals