ZH
RU
ES

Mass Ratio and Volume Ratio

Mass Ratio and Volume Ratio, Total:496 items.

In the international standard classification, Mass Ratio and Volume Ratio involves: Testing of metals, Soil quality. Pedology, Conducting materials, Electricity. Magnetism. Electrical and magnetic measurements, Paints and varnishes, Products of the chemical industry, Powder metallurgy, Particle size analysis. Sieving, Products of non-ferrous metals, Cellular materials, Electrical wires and cables, Measurement of fluid flow, Construction materials, Packaging materials and accessories, Fluid power systems, Cereals, pulses and derived products, Fuels, Quality, Surface treatment and coating, Refractories, Non-textile floor coverings, Measurement of volume, mass, density, viscosity, Wastes, Continuous handling equipment, Equipment for petroleum and natural gas industries, Analytical chemistry, Nuclear energy engineering, Road engineering, Cinematography, Metrology and measurement in general, Wood-based panels, Aircraft and space vehicles in general, Linear and angular measurements, Geology. Meteorology. Hydrology, Paint ingredients, TESTING, Vocabularies, Water quality, Waxes, bituminous materials and other petroleum products, Iron and steel products, Protection against fire, Ceramics, Inorganic chemicals, Milk and milk products, Fluid storage devices, Integrated circuits. Microelectronics, Radiation measurements, Leather technology, Welding, brazing and soldering, Bottles. Pots. Jars, Barrels. Drums. Canisters, Electronic components in general, Petroleum products in general, Products of the textile industry, Coals, Plastics, Rubber, Air quality, Organic chemicals, Textile auxiliary materials, Fruits. Vegetables, Road vehicles in general.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Mass Ratio and Volume Ratio

GB/T 22587-2008 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
GB/T 22587-2017 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
GB/T 19587-2017 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 19587-2004 Determination of the specific surface area of solids by gas adsorption using the BET method
GB/T 7702.20-2008 Test method for granular activated carbon from coal.Determination of pore volume and specific surface area
GB/T 17291-1998 Petroleum liquid and gas measurement--Standard reference conditions
GB/T 42310-2023 Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method
GB/T 1864-2012 General methods of test for pigments and extenders.Comparison of colour of pigments
GB/T 13235.2-1991 Petroleum and liquid petroieum products--Volumetric calibration of vertical cylindrical metal tanks--Optical reference line method
GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

International Organization for Standardization (ISO), Mass Ratio and Volume Ratio

ISO 11461:2001 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio
ISO 5024:1976 Petroleum liquids and gases; Measurement; Standard reference conditions
ISO 12154:2014 Determination of density by volumetric displacement - Skeleton density by gas pycnometry
ISO 8687:1987 Cinematography; Signal-to-noise ratio of 8 mm Type S, 16 mm and 35 mm variable-area photographic sound records; Method of measurement
ISO 3320:2013 Fluid power systems and components.Cylinder bores and piston rod diameters and area ratios.Metric series
ISO 13317-1:2001 Determination of particle size distribution by gravitational liquid sedimentation methods - Part 1: General principles and guidelines
ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
ISO 625:1975 Solid mineral fuels - Determination of carbon and hydrogen - Liebig method
ISO 625:1996 Solid mineral fuels - Determination of carbon and hydrogen - Liebig method
ISO 1088:2007 Hydrometry - Velocity-area methods using current-meters - Collection and processing of data for determination of uncertainties in flow measurement
ISO 10563:2005 Building construction - Sealants - Determination of change in mass and volume
ISO/TS 24154:2005 Hydrometry - Measuring river velocity and discharge with acoustic Doppler profilers
ISO 19703:2005 Generation and analysis of toxic gases in fire - Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
ISO 19703:2010 Generation and analysis of toxic gases in fire - Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
ISO 19703:2018 Generation and analysis of toxic gases in fire - Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
ISO 787-1:1982 General methods of test for pigments and extenders; Part 1 : Comparison of colour of pigments
ISO 625:1996/cor 1:1996 Solid mineral fuels - Determination of carbon and hydrogen - Liebig method; Technical Corrigendum 1
ISO 787-10:1993 General methods of test for pigments and extenders; part 10: determination of density; pyknometer method
ISO 13160:2012 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting
ISO 13160:2021 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting
ISO 3727:1977 Butter; Determination of water, solids-not-fat and fat contents on the same test portion (Reference method)
ISO 10563:2023 Building and civil engineering sealants — Determination of change in mass and volume
ISO 787-22:1980 General methods of test for pigments and extenders; Part 22 : Comparison of resistance to bleeding of pigments
ISO 787-21:1979 General methods of test for pigments and extenders; part 21: comparison of heat stability of pigments using a stoving medium

Korean Agency for Technology and Standards (KATS), Mass Ratio and Volume Ratio

KS I ISO 11461:2005 Soil quality－Determination of soil water content calculatedon a volume basis(Gravimetric method)
KS C IEC 61788-5-2016(2021) Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS C IEC 61788-5:2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
KS L 3519-2017(2022) Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS L 3519-1987 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS L 3519-1982 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS L 3519-2017 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS M ISO 3233-2002(2012) Paints and varnishes－Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
KS M ISO 4590:2018 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS L 3519-1997 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
KS M ISO 5024:2003 Petroleum liquids and liquefied petroleum gases-Measurement-Standard reference conditions
KS A ISO 8687:2003 Cinematography－Signal－to－noise ratio of 8 mm type S, 16 mm and 35 mm variable－area photographic sound records－Method of measurement
KS B ISO 1088:2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
KS B ISO 1088:2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
KS M ISO 21687:2011 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
KS M ISO 21687:2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS B ISO 1088:2005 Liquid flow measurement in open channels-Velocity-area methods-Collection and processing of data for determination of errors in measurement
KS E ISO 625:2003 Solid mineral fuels－Determination of carbon and hydrogen sulfur－Liebig method
KS L 4008-2006(2021) Testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products
KS L 4008-2006(2016) Testing method for water absorption, bulk density, apparent specific gravity and apparent porosity of fired whiteware products
KS F 2496-2017(2022) Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS F 2234-2016 Measuring method for the mass per unit volume(density) and the mass per unit of surface area of polystyrene composite wood wool cement boards
KS I ISO 13160:2014 Water quality — Strontium 90 and strontium 89 — Test methods using liquid scintillation counting or proportional counting
KS I ISO 13160:2021 Water quality — Strontium 90 and strontium 89 — Test methods using liquid scintillation counting or proportional counting
KS I ISO 15970-2010(2021) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor
KS M ISO 3233-1:2021 Paints and varnishes — Determination of percentage volume of non-volatile matter — Part 1: Method using a coated test panel- to determine non-volatile matter and to determine dry-film density by the A
KS M ISO 3233-1:2016 aints and varnishes ㅡ Determination of the percentage volume of non-volatile matter ㅡ Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle

Danish Standards Foundation, Mass Ratio and Volume Ratio

DS/EN 61788-5:2001 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
DS/EN 61788-12:2002 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
DS/EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
DS/EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
DS/EN ISO 4590:2003 Rigid cellular plastics - Determination of thevolume percentage of open cells and of closed cells
DS/EN ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
DS/EN 14702-1:2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
DS/EN 772-9/A1:2005 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling
DS/EN 772-9:1999 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling
DS/INSTA 178:1990 Building sealants. Volume shrinkage and weight loss after ageing
DS/EN ISO 787-25:2007 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method
DS/ISO 13160:2021 Water quality – Strontium 90 and strontium 89 – Test methods using liquid scintillation counting or proportional counting
DS/EN ISO 10563:2007 Building construction - Sealants - Determination of change in mass and volume
DS/EN 12130:1999 Feather and down - Test methods - Determination of the filling power (massic volume)

European Committee for Electrotechnical Standardization（CENELEC）, Mass Ratio and Volume Ratio

EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
EN 61788-5:2001 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
EN IEC 61788-4:2020 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors

Lithuanian Standards Office , Mass Ratio and Volume Ratio

LST EN 61788-5-2002 Superconductivity. Part 5: Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors (IEC 61788-5:2000)
LST EN 61788-12-2003 Superconductivity. Part 12: Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2002)
LST EN 61788-12-2014 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013)
LST EN ISO 4590:2004 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002)
LST ISO 7033:1995 Fine and coarse aggregates for concrete. Determination of particle mass-per-volume and water absorption. Pyknometer method
LST EN 14702-1-2006 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
LST EN ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of
LST EN ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)
LST EN 772-9-2000 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
LST EN 772-9-2002/A1-2005 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
LST EN ISO 3233-2:2014 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Arc
LST EN ISO 787-25:2007 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:1993)
LST EN 12130-2002 Feather and down - Test methods - Determination of the filling power (massic volume)

British Standards Institution (BSI), Mass Ratio and Volume Ratio

BS EN 61788-12:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-12:2002 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-12:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
BS EN 61788-5:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2001 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
BS ISO 6421:2012 Hydrometry. Methods for assessment of reservoir sedimentation
BS ISO 7181:1997 Hydraulic fluid power. Cylinders. Bore and rod area ratios
BS EN ISO 4590:2016 Tracked Changes. Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells
BS EN 14702-1:2006(2007) Characterization of sludges - Settling properties - Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
BS ISO 12154:2014 Determination of density by volumetric displacement. Skeleton density by gas pycnometry
BS EN ISO 4590:2003 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
BS 6169-2:1984 Methods for volumetric measurement of liquid hydrocarbons - Turbine meter systems
BS EN IEC 61788-4:2020 Superconductivity - Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
BS DD ISO/TS 3716:2006 Hydrometry - Functional requirements and characteristics of suspended-sediment samplers
BS EN 14702-1:2006 Characterization of Sludges. Settling Properties. Part 1: Determination of Settleability (Determination of the Proportion of Sludge Volume and Sludge Volume Index)
BS EN 14702-1:2007 Characterization of sludges - Settling properties - Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
18/30382796 DC BS EN 61788-4. Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
BS ISO 3320:2013 Fluid power systems and components. Cylinder bores and piston rod diameters and area ratios. Metric series
BS 4359-1:1996 Determination of the specific surface area of powders. BET method of gas adsorption for solids (including porous materials)
BS PD CEN/TR 15996:2010 Hydrometry — Measurement of snow water equivalent using snow mass registration devices
BS ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
BS ISO 1088:2007 Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement
BS ISO 19703:2006 Generation and analysis of toxic gases - Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
BS EN ISO 18365:2013 Hydrometry. Selection, establishment and operation of a gauging station
BS 734C:1962 Measurement of the density of milk using a hydrometer - Percentage of total solids and non-fatty solids in milk corresponding to given fat content and observed density fat content range 2-6 per cent (with fat in the liquid state)
BS EN ISO 3233-2:2019 Paints and varnishes. Determination of the percentage volume of non-volatile matter - Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the…
BS EN ISO 10563:2005 Building construction - Sealants - Determination of change in mass and volume
BS DD ISO/TS 24154:2006 Hydrometry - Measuring river velocity and discharge with acoustic Doppler profilers
BS CECC 90302:1986 Specification for harmonized system of quality assessment for electronic components - Blank detail specification: integrated voltage comparators
BS ISO 19703:2018 Generation and analysis of toxic gases in fire. Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires
BS EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
BS EN 13974:2002 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
BS EN ISO 3233-3:2015 Tracked Changes. Paints and varnishes. Determination of the percentage volume of non-volatile matter. Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the ...
BS EN ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS 3900-A10:1998 Methods of test for paints - Tests on liquid paints (excluding chemical tests) - Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating
BS EN ISO 10563:2023 Building and civil engineering sealants. Determination of change in mass and volume
22/30450337 DC BS EN 16906. Liquid petroleum products. Determination of the ignition quality of diesel fuels. Fixed compression ratio engine method
BS EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

European Committee for Standardization (CEN), Mass Ratio and Volume Ratio

EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells
EN ISO 13160:2021 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2021)
EN ISO 13160:2015 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting
EN ISO 10563:1997 Building Construction - Sealants for Joints - Determination of Change in Mass and Volume ISO 10563: 1991
EN ISO 10563:2017 Buildings and civil engineering works - Sealants - Determination of change in mass and volume
EN 13974:2002 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume
EN ISO 787-1:2017 General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments
EN ISO 3727:1995 Butter - Determination of Water, Solids-not-Fat and Fat Contents on the Test Portion (Reference Method) (ISO 3727 : 1977)
EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
EN 772-9:1998 Methods of test for masonry units?Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling Incorporates Amendment A1: February 2005

NL-NEN, Mass Ratio and Volume Ratio

NEN 6311-1983 Vegetable and animal oils and fats Determination of the conventional mass by volume and of the relative density
NEN 6311-1993 Vegetable and animal oils and fats. Determination of the conventional mass by volume and of the relative density

AGMA - American Gear Manufacturers Association, Mass Ratio and Volume Ratio

P239.17-A-1982 Comparison of the AGMA and DIN Quality Systems

Association Francaise de Normalisation, Mass Ratio and Volume Ratio

NF EN 61788-12:2014 Supraconductivité - Partie 12 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/non-cuivre des fils en composite supraconducteur Nb3Sn
NF EN 61788-5:2014 Supraconductivité - Partie 5 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/supraconducteur des fils en composite supraconducteur Cu/Nb-Ti
NF EN ISO 4590:2016 Plastiques alvéolaires rigides - Détermination du pourcentage volumique de cellules ouvertes et de cellules fermées
NF C31-888-5*NF EN 61788-5:2014 Superconductivity - Part 5 : matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
NF C31-888-12:2003 Supraconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires.
NF C31-888-12*NF EN 61788-12:2014 Superconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
NF EN ISO 18757:2006 Céramiques techniques - Détermination de la surface spécifique (aire massique) des poudres céramiques par adsorption de gaz à l'aide de la méthode BET
NF V03-719:1996 Cereals. Determination of bulk density, called "mass per hectolitre".
NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
NF EN 16074:2019 Peintures et vernis - Détermination de la teneur en matière non volatile et du rendement superficiel spécifique de revêtements pour prélaquage
NF EN ISO 3233-3:2015 Peintures et vernis - Détermination du pourcentage en volume de matière non-volatile - Partie 3 : détermination par calcul à partir de la teneur en matière non volatile déterminée conformément à l'ISO 3251, de la masse volumique du produit de...
NF B56-013:1980 Panneaux fibragglo - Détermination de la masse volumique et de la masse surfacique
NF C31-888-4*NF EN IEC 61788-4:2020 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
NF E48-019*NF ISO 3320:2014 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series
NF T30-085:2016 Paints and varnishes - Determination of the dry extract and of the dry coating density - Determination of the dry coating volumic ratio
NF EN 772-9/A1:2005 Méthodes d'essai des éléments de maçonnerie - Partie 9 : détermination du volume et du pourcentage de vides et du volume net absolu des éléments de maçonnerie en terre cuite et en silico-calcaire par remplissage de sable
FD CEN/TR 15298:2006 Produits alimentaires - Préparation d'échantillons gros volume pour l'analyse des mycotoxines - Comparaison entre broyage à sec et broyage par voie humide
NF P12-109/A1*NF EN 772-9/A1:2005 Methods of test for masonry units - Part 9 : determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling.
NF EN ISO 13160:2021 Qualité de l'eau - Strontium 90 et strontium 89 - Méthodes d'essai par comptage des scintillations en milieu liquide ou par comptage proportionnel
NF B35-512:1983 Laboratory glassware. Glass hydrometers. Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids).
NF EN ISO 3233-2:2019 Peintures et vernis - Détermination du pourcentage en volume de matière non volatile - Partie 2 : méthode utilisant la teneur en matière non volatile déterminée conformément à l'ISO 3251 et la masse volumique du feuil sec déterminée par le p...
NF C86-902:1986 Harmonized system of quality assessment for electronic components. Integrated voltage comparators. Blank detail specification CECC 90 302.
NF ISO 8004:1986 Produits carbonés utilisés pour la production de l'aluminium - Coke calciné et produits carbonés calcinés - Détermination de la masse volumique au xylène - Méthode pycnométrique.
NF T30-141-2*NF EN ISO 3233-2:2019 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2 : method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Ar
NF P85-502:2005 Building construction - Sealants - Determination of change in mass and volume.
NF EN 13974:2003 Conteneurs en plastique rigide - Spécifications des tolérances sur les dimensions, le poids et le volume
NF EN 772-3:1999 Méthodes d'essai des éléments de maçonnerie - Partie 3 : détermination du volume net et du pourcentage des vides des éléments de maçonnerie en terre cuite par pesée hydrostatique.
NF T30-141-3*NF EN ISO 3233-3:2015 Paints and varnishes - Determination of percentage volume of non-volatile matter - Part 3 : Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of th
NF M60-806*NF EN ISO 13160:2021 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting
NF EN ISO 14956:2002 Qualité de l'air - Évaluation de l'aptitude à l'emploi d'une procédure de mesurage par comparaison avec une incertitude de mesure requise
NF H35-204*NF EN 13974:2003 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume.
NF M60-806:2012 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting.
NF V04-392:1995 BUTTER. DETERMINATION OF WATER, SOLIDS-NOT-FAT AND FAT CONTENTS ON THE SAME TEST PORTION (REFERENCE METHOD). (EUROPEAN STANDARD EN ISO 3727).
NF EN ISO 10563:2017 Bâtiments et ouvrages de génie civil - Mastics - Détermination des variations de masse et de volume
NF D90-206*NF EN 12130:2018 Feather and down - Test methods - Determination of the fill power (massic volume)
NF P85-502*NF EN ISO 10563:2017 Buildings and civil engineering works - Sealants - Determination of change in mass and volume
NF EN ISO 17778:2015 Systèmes de canalisations en plastiques - Raccords, robinets et équipements auxiliaires - Détermination du rapport débit gazeux/perte de charge

CENELEC - European Committee for Electrotechnical Standardization, Mass Ratio and Volume Ratio

EN 61788-12:2002 Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires

International Electrotechnical Commission (IEC), Mass Ratio and Volume Ratio

IEC 61788-5:2013 Superconductivity.Part 5: Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
IEC 61788-12:2013 Superconductivity.Part 12: Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<(Index)3>Sn composite superconducting wires
IEC 61788-4:2020 RLV Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors

ES-UNE, Mass Ratio and Volume Ratio

UNE-EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (Endorsed by AENOR in November of 2013.)
UNE-EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (Endorsed by AENOR in October of 2013.)
UNE-EN ISO 4590:2017 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
UNE 43312:1982 ERRATUM:2011 Glass hydrometers. Conventional value for the thermal cubic-expansion coefficient (for use in the preparation of measurement tables for liquids)
UNE 77043:2019 Water quality. Sulphide determination. Iodometric and colorimetric method.
UNE-EN 772-9:1999 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
UNE-EN 772-9:1999/A1:2008 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
UNE-EN IEC 61788-4:2020 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (Endorsed by Asociación Española de Normalización in June of 2020.)
UNE-EN 772-3:1999 METHODS OF TEST FOR MASONRY UNITS - PART 3: DETERMINATION OF NET VOLUME AND PERCENTAGE OF VOIDS OF CLAY MASONRY UNITS BY HYDROSTATIC WEIGHING.
UNE-EN ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density...
UNE-EN ISO 13160:2021 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2021) (Endorsed by Asociación Española de Normalización in September of 2021.)
UNE-EN ISO 13160:2016 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012)
UNE-EN ISO 3233-2:2020 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the ...
UNE-EN 12130:2018 Feather and down - Test methods - Determination of the fill power (massic volume) (Endorsed by Asociación Española de Normalización in October of 2018.)
UNE-EN ISO 10563:2018 Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017)

KR-KS, Mass Ratio and Volume Ratio

KS C IEC 61788-5-2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
KS M ISO 4590-2018 Rigid cellular plastics — Determination of the volume percentage of open cells and of closed cells
KS M ISO 21687-2016 Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
KS B ISO 1088-2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
KS A ISO 8687-2003(2023) Cinematography - Signal-to-noise ratio of 8mm type S, 16mm and 35mm variable-area photographic Sound records - Method of measurement
KS M ISO 23811-2012 Paints and varnishes－Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical
KS I ISO 13160-2021 Water quality — Strontium 90 and strontium 89 — Test methods using liquid scintillation counting or proportional counting
KS I ISO 13160-2014 Water quality — Strontium 90 and strontium 89 — Test methods using liquid scintillation counting or proportional counting
KS M ISO 3233-1-2021 Paints and varnishes — Determination of percentage volume of non-volatile matter — Part 1: Method using a coated test panel- to determine non-volatile matter and to determine dry-film density by the A

Japanese Industrial Standards Committee (JISC), Mass Ratio and Volume Ratio

JIS H 7308:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
JIS H 7304:2002 Superconductivity -- Part 5: Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
JIS H 7308:2006 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
JIS H 7304:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
JIS H 7503:2003 Method for measurement of cavity volume fraction of superplastically deformed metallic materials
JIS Z 8804:2012 Methods of measuring density and specific gravity of liquid
JIS Z 8807:2012 Methods of measuring density and specific gravity of solid
JIS H 7306:2018 Superconductivity -- Residual resistance ratio measurement -- Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
JIS B 8366-1:2018 Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 1: Cylinder bores and piston rod diameters and area ratios
JIS B 7555:2003 Method of flow measurement by coriolis meters (mass flow, density and volume flow measurement)

German Institute for Standardization, Mass Ratio and Volume Ratio

DIN 53219:2005 Paints and varnishes - Determination of percentage volume of non-volatile matter
DIN EN ISO 4590:2016-12 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016); German version EN ISO 4590:2016
DIN 19683-13:2007-07 Soil quality - Physical laboratory tests - Part 13: Determination of soil volume percentage, total pore volume and pore number of mineral soils
DIN 66133:1993 Determination of pore volume distribution and specific surface area of solids by mercury intrusion
DIN 19683-14:2007-07 Soil quality - Physical laboratory tests - Part 14: Determination of soild volume percentage of bog soils
DIN EN 61788-12:2014 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013); German version EN 61788-12:2013
DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN EN 61788-5:2014 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (IEC 61788-5:2013); German version EN 61788-5:2013
DIN 9020-3:1983-10 Aerospace; mass breakdown for aircraft heavier than air; group mass statement
DIN EN 772-9:2005-05 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling; German version EN 772-9:1998 + A1:2005
DIN 9020-3 Beiblatt 1:1983-10 Aerospace; mass breakdown for aircraft heavier than air; group mass statement; condensed version
DIN 9020-3 Beiblatt 1:1983 Aerospace; mass breakdown for aircraft heavier than air; group mass statement; condensed version
DIN 12803-2:1981 Laboratory glassware; alcoholometry; alcoholometers for the alcoholic strength by volume
DIN EN 14702-1:2006-06 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index); German version EN 14702-1:2006
DIN 58964:2015-09 Quality assurance of POCT results - Assessment criteria for comparison measurement and implementation
DIN 58964:2015 Quality assurance of POCT results - Assessment criteria for comparison measurement and implementation
DIN 9020-3:1983 Aerospace; mass breakdown for aircraft heavier than air; group mass statement
DIN 9020-4:1983 Aerospace; mass breakdown for aircraft heavier than air; detail mass statement
DIN 66132:1975-07 Determination of specific surface area of solids by adsorption of nitrogen; single-point diffenrential method according to Haul and Dümbgen
DIN 66134:1998 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN 9020-3 Bb.1:1983 Aerospace; mass breakdown for aircraft heavier than air; group mass statement; condensed version
DIN 9020-1:1983 Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; survey
DIN 66134:1998-02 Determination of the pore size distribution and the specific surface area of mesoporous solids by means of nitrogen sorption - Method of Barrett, Joyner and Halenda (BJH)
DIN 9020-2:1983-10 Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; definitions
DIN ISO 3320:2016 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series (ISO 3320:2013)
DIN EN 772-9:2005 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling; German version EN 772-9:1998 + A1:2005
DIN 51913:2013 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
DIN 9020-1:1983-10 Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; survey
DIN 9020-5:1992-02 Aerospace; mass breakdown for aircraft heavier than air; dimensional and construction data
DIN EN 16906:2022 Liquid petroleum products - Determination of the ignition quality of diesel fuels - Fixed compression ratio engine method; German and English version prEN 16906:2022
DIN 51907:2013-12 Testing of carbonaceous materials - Determination of density with liquid pycnometer - Binding and impregnating materials
DIN EN ISO 10563:2005 Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005); English version of DIN EN ISO 10563
DIN EN 13974:2003-01 Rigid plastics containers - Specification of tolerance for dimensions, weight and volume; German version EN 13974:2002
DIN 45940-1302:1987 Harmonized system of quality assessement for electronic components; blank detail specification: integrated voltage comparators
DIN EN ISO 3233-3:2015-09 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density...
DIN EN ISO 13160:2016-03 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012); German version EN ISO 13160:2015 / Note: To be replaced by DIN EN ISO 13160 (2020-04).
DIN EN ISO 13160:2020-04 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO/DIS 13160:2020); German and English version prEN ISO 13160:2020 / Note: Date of issue 2020-03-20*Intended as replacement for ...
DIN EN 772-3:1998 Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing; German version EN 772-3:1998
DIN SPEC 1107:2010 Hydrometry - Measurement of snow water equivalent using snow mass registration devices; German version CEN/TR 15996:2010
DIN 19529:2009 Leaching of solid materials - Batch test for the examination of the leaching behaviour of inorganic substances at a liquid to solid ratio of 2 l/kg
DIN EN ISO 3233-2:2020-01 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the ...
DIN EN ISO 3727-2:2002 Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001); German version EN ISO 3727-2:2001
DIN EN 12130:2018 Feather and down - Test methods - Determination of the fill power (massic volume)
DIN EN 12130:2018-10 Feather and down - Test methods - Determination of the fill power (massic volume); German version EN 12130:2018
DIN EN 15761:2022 Pre-shaped growing media - Determination of the dimensions measured and bulk density; German and English version prEN 15761:2021
DIN EN ISO 10563:2017-09 Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017); German version EN ISO 10563:2017
DIN 9020-5:1992 Aerospace; mass breakdown for aircraft heavier than air; dimensional and construction data
DIN EN ISO 2286-3:1998 Rubber- or plastic-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998); German version EN ISO 2286-3:1998

YU-JUS, Mass Ratio and Volume Ratio

JUS H.B8.239-1988 Ethanot for industrial use. Determination of methanol content (methanol contents between 0,10 and 1J50% (V/V)). Visualcolorimetricmethod
JUS H.G8.210-1985 Reagents. Methanct. Determination of free acidcontent (as HCOOH). Volumetric method
JUS H.G8.258-1985 Reagents. Methanol. Determination of aidehydes and ketones content (as CH3COCH3). Turbidimetnc method
JUS H.G8.212-1985 Reagents. Methanol. Determination of aldehydes and ketones content (as CH3COCH3J. Colorimetric method
JUS E.K8.022-1991 Animal and vegetable fats and oils. Determination of mass per unit volume ("litre weight") in air
JUS B.F8.003-1979 Asbestos. Testing of quality by met elassification, determination of specific sur face, volume, density and dust content

Professional Standard - Energy, Mass Ratio and Volume Ratio

NB/SH/T 0571-2021 Determination of Specific Surface Area and Micropore Volume of Zeolite in Catalyst

Taiwan Provincial Standard of the People's Republic of China, Mass Ratio and Volume Ratio

CNS 11151-1984 Method of Test for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete
CNS 8759-1987 Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens

American Society for Testing and Materials (ASTM), Mass Ratio and Volume Ratio

ASTM D347-04 Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and Coal Tar
ASTM UOP964-98 Surface Area, Pore Volume, Average Pore Diameter and Pore Diameter Distribution of Porous Materials
ASTM D6093-97(2011) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D6093-97(2022) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D3663-03(2008) Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D347-97 Standard Tables for Volume and Specific Gravity Correction for Creosote, Creosote-Coal Tar Solution and Coal Tar
ASTM D2726-04 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D2726-00 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM C1039-85(2010)e1 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
ASTM D2726-05 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM C1039-85(2020)e1 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
ASTM E344-12 Terminology Relating to Thermometry and Hydrometry
ASTM D6752-03e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-03 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-09 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM A569/A569M-91a(1993)e1 Standard Specification for Steel, Carbon (O. 15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial Quality
ASTM D1188-07 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188-07(2015) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM C830-00 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C830-00(2016) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM C830-00(2006) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM D1188-07e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188/D1188M-22 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples
ASTM D1188-96e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002)e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D2726-10 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D2421-02(2007) Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D2421-95 Standard Practice for Interconversion of Analysis of C₅ and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
ASTM D2421-01 Standard Practice for Interconversion of Analysis of C₅ and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
ASTM D2421-02 Standard Practice for Interconversion of Analysis of C₅ and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis
ASTM D2421-21 Standard Practice for Interconversion of Analysis of C
ASTM D2421-21e1 Standard Practice for Interconversion of Analysis of C
ASTM D2421-13 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D4468-85(2006) Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry
ASTM D6752/D6752M-17 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752/D6752M-18 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D2421-19 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM D2421-18 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
ASTM C20-00(2022) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
ASTM E2029-99(2004) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM E2029-99 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM E202-09 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
ASTM D4567-03 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-99 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D4567-03(2008) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D4567-03(2013) Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM E2029-11(2019) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM D6752-02a Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-02 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

CL-INN, Mass Ratio and Volume Ratio

Group Standards of the People's Republic of China, Mass Ratio and Volume Ratio

T/YNIA 021-2023 Measurement for specific surface area and pore volume of MOFs materials —— Static volumetric method
T/CPCIF 0140-2021 Catalyst carrier— Determination of surface area and pore volume for quasi-thin-water aluminit— Nitrogen adsorption method
T/CSTM 00031-2020 Thermoplastic elastomer - Determination of the melt mass-flow rate and melt volume-flow rate

GM Europe, Mass Ratio and Volume Ratio

GME 8742-2007 Testing the Specific Volume Resistance of Elastomers, Plastics and Adhesives (English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14711.)
GME8742-2007 Pr眉fung des spezifischen Durchgangswiderstandes von Elastomeren, Kunststoffen und Klebstoffen Testing the Specific Volume Resistance of Elastomers, Plastics and Adhesives English/German; This specification may be applied only for current projects incl.

SE-SIS, Mass Ratio and Volume Ratio

SIS 83 25 17-1973 Carpets. Determination of surface pile density and pile volume ratio

CZ-CSN, Mass Ratio and Volume Ratio

CSN ISO 7033:1993 Fine and coarse aggregates for concrete. Determination of the particle mass-per-volume and water absorption. Pyknometer method
CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities
CSN 72 1171-1967 Determination of mass, porosity and voids ratio of aggregates
CSN 66 8050-1975 Determination of the volume mass of a blasting cartridge and of the bulk mass of loose-powder explosives
CSN 49 0162-1975 Testing of physical and mechanical pro- perties of chipboards. Volume weight and square weight
CSN 73 1315-1989 Determination of volume mass, den- sity, compactness and porosity of concrete
CSN 35 8757 Cast.7-1985 Transistors. Measuring method of absolute value of forward current transfer ratio and transition frequency
CSN 35 8746-1973 Semiconductor devices. Transistore. Measurement of absolute value of forward current transfer ratio and frequencies fT, fh21b, fh21e
CSN 35 8745-1973 Semiconductor devices. Transistore. Measurement of open-circuit reverse voltage transfer ratio and tinie coefíicient at high frequencies

IT-UNI, Mass Ratio and Volume Ratio

UNI 5824-1979
UNI 4870-1961
UNI EN ISO 13160:2021 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting
UNI 3518-1954

GOSTR, Mass Ratio and Volume Ratio

PNST 292-2018 Russian system of quality. Comparative testing of Condensed sweetened milk
PNST 256-2017 Russian system of qualiti. Comparative testing of quit blanket
PNST 287-2018 Russian system of quality. Comparative testing of kvases
PNST 253-2017 Russian system of quality. Comparative testing of bed-clothes
PNST 335-2018 Russian system of quality. Comparative testing of men's suits
PNST 258-2017 Russian system of quality. Comparative testing of cotton terry jack-towels
PNST 286-2018 Russian system of quality. Comparative testing of ring–shaped rolls
PNST 285-2018 Russian system of quality. Comparative testing of trousers for boys of school age
PNST 291-2018 Russian system of quality. Comparative testing of cranberry mors
PNST 290-2018 Russian system of quality. Comparative testing of food chicken eggs
PNST 336-2018 Russian system of quality. Comparative testing of sprats in oil
PNST 289-2018 Russian system of quality. Comparative testing of men's socks and stockings
PNST 259-2017 Russian system of quality. Comparative testing of pillows with fibre filler
PNST 275-2018 Russian system of quality. Comparative testing of children's socks and stockings
PNST 333-2018 Russian system of quality. Comparative testing of preserves from herring fillet in oil
GOST 9568-1980 Pulp and paper. Method for determination of mass percentage of calcium
PNST 293-2018 Russian system of quality. Comparative testing of structured product from fish mince - crab sticks
PNST 288-2018 Russian system of quality. Comparative testing of sarafans and skirts for girls of school age
PNST 334-2018 Russian system of quality. Comparative testing of Jackets with a filling of artificial materials requirements
PNST 337-2018 Russian system of quality. Comparative testing of sewing wire products with thermostat fiber walls for children of preschool age groups

AENOR, Mass Ratio and Volume Ratio

UNE 40242-1:1974 CARPETS. DETERMINATION OF MEASURED SURFACE PILE DENSITY AND MEASURED PILE FIBRE VOLUME RATIO.
UNE 77043:2002 Water quality. Sulphide determination. Iodometric and colorimetric method.
UNE-EN 14702-1:2007 Characterisation of sludges - Settling properties - Part 1: Determination of settleability (Determination of the proportion of sludge volume and sludge volume index)
UNE-EN ISO 3233-2:2014 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Arc
UNE-EN ISO 787-25:2007 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:1993)
UNE-EN 12130:1999 FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE FILLING POWER (MASSIC VOLUME)

BE-NBN, Mass Ratio and Volume Ratio

NBN I-1008-1969
NBN-ISO 10563:1992 Building construction - Sealants for joints - Determination of change in mass and volume

ACI - American Concrete Institute, Mass Ratio and Volume Ratio

ACI 211.1-1991 Standard Practice for Selecting Proportions for Normal@ Heavyweight@ and Mass Concrete

RU-GOST R, Mass Ratio and Volume Ratio

PNST 254-2017 Russian system of quality. Comparative testing of rice groats
PNST 255-2017 Russian system of quality. Comparative testing of food common salt
PNST 257-2017 Russian system of quality. Comparative testing of buckwheat groats
PNST 281-2018 Russian system of quality. Comparative testing of shirts for men
PNST 280-2018 Russian system of quality. Comparative testing of pure natural honey
PNST 274-2018 Russian system of quality. Comparative testing of shirts for children and teen-agers
PNST 260-2017 Russian system of quality. Comparative testing of unsalted butter
PNST 279-2018 Russian system of quality. Comparative testing of wheat bakery flour of high grade
PNST 276-2018 Russian system of quality. Comparative testing of casual shoes with uppers of leather
PNST 272-2018 Russian system of quality. Comparative testing of knitted underwear for preschool and school age children
GOST R ISO 21687-2014 Carbonaceous materials for the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
PNST 252-2017 Russian system of quality. Comparative testing of grained salmon caviar packed in cans
GOST 8.142-2013 State system for insuring the uniformity of measurements. The national traceability chain for instruments measuring the mass and volumetric (the mass and the volume) flow of liquid
GOST R 8.667-2009 State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion, specific energy of combustion and volumetric energy of combustion (combustion calorimeters)
PNST 273-2018 Russian system of quality. Comparative testing of knitted underwear for newborn babies and infants of nursery age
GOST 8.374-2013 State system for insuring the uniformity of measurements. State verification schedule for instruments measuring the volumetric and mass flow (volume and mass) of water
PNST 277-2018 Russian system of quality. Comparative testing of mobile applications for smartphones
GOST R 8.909-2016 State system for insuring the uniformity of measurements. Secondary standards of units of mass and volumetric flow rate, mass and volume fluid. General metrological and technical requirements
GOST 15528-1986 Instruments for measuring flowrate, volume or mass of flowing fluid and gas. Terms and definitions
PNST 278-2018 Russian system of quality. Comparative testing of water-dispersive paints with antibacterial effect
GOST 31633-2012 Milk and milk products. Determination of mass portion of milk fat using photocolorimetry method
GOST R 52963-2008 Water. Methods for determination of alkalinity, and mass concentration of carbonates and hydrocarbonates
GOST 17631-1972 Dressed fur skins and coat sheepskins. Method for determination of ash mass persentage in skin tissue
GOST R 53018-2008 Dressed fur and sheepskins. Method of determining the untied fatty substances mass fraction
GOST R ISO 15612-2009 Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure
GOST R 8.872-2014 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring specific enthalpy and specific heat-conguction of solid frames in the range of temperature from 700 to 1800 K
GOST R 53013-2008 Dressed fur and sheepskins. Methods of determining the chromium oxide (III) mass fraction
GOST 8.209-1976 State system of ensuring the uniformity of measurements. Magnetoelectrical logometers. Methods and means of verification
GOST 8756.10-2015 Fruit and vegetable products. Methods for determination of volume and mass fraction of the pulp

US-FCR, Mass Ratio and Volume Ratio

FCR COE SL-96-15 REPORT 2-1996 WORKABLITY OF MASS CONCRETE REPORT 2, SUPPLEMENTAL PROPORTIONING PARAMETERS

PT-IPQ, Mass Ratio and Volume Ratio

E 209-1967
NP EN 772-2-2001 Methods of test for masonry units Part 2:Determination of percentage area of voids in aggregate concrete masonry units(by paper indentation)

The American Road & Transportation Builders Association, Mass Ratio and Volume Ratio

AASHTO T 354-2015 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
AASHTO TP 77-2014 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
AASHTO TP 77-2009 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
AASHTO T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2016 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
AASHTO T 166-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens
AASHTO T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
AASHTO T 331-2021 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
AASHTO T166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens Twentieth Edition R(1998)
AASHTO TP 82-2010 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Bituminous Mixtures Using Water Displacement Measured by Pressure Sensor (Revision 1)
AASHTO T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

AASHTO - American Association of State Highway and Transportation Officials, Mass Ratio and Volume Ratio

T 354-2015 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
TP 77-2009 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
TP 77-2014 Standard Method of Test for Specific Gravity and Absorption of Aggregate by Volumetric Immersion Method
T 166-2005 Standard Method of Test for Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
T 166-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2011 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2010 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2012 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
T 166-2007 Standard Method of Test for Bulk Specific Gravity of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
TP 82-2010 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Bituminous Mixtures Using Water Displacement Measured by Pressure Sensor
T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
T 166-1993 Standard Specification for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Eighteenth Edition)
T 331-2013 Standard Method of Test for Bulk Specific Gravity (Gmb) and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 166-2000 Standard Method of Test for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens (Twentieth Edition)

Association of German Mechanical Engineers, Mass Ratio and Volume Ratio

VDI 4436-2007 Measurement of mass and volume flows of bulk solids

CU-NC, Mass Ratio and Volume Ratio

NC 54-279-1984 Construction Materials and Producis. Calcium Oxide and Calcium Hydrale Volumetric Determination of their Useful Percentage
NC 57-27-1983 Geodesy and Cartography Topographic Maps at Scales 1:10 000 and 1:5 000 Quality Specifications
NC 66-03-1987 Electronic and Electrotechnical Industry. "Caribe 416" Television Receiver. Quality SDecifications
NC 90-13-42-1988 Metrological Assurance. Densimeters and Aerometers. International Alcoholimetric Tables

国家能源局, Mass Ratio and Volume Ratio

SY/T 6154-2019 Static adsorption capacity method for determination of rock specific surface area and pore size distribution

国家市场监督管理总局、中国国家标准化管理委员会, Mass Ratio and Volume Ratio

GB/T 25897-2020 Residual resistance ratio measurement—Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors

Professional Standard - Nuclear Industry, Mass Ratio and Volume Ratio

EJ/T 842-1994 Zinc Isotope Ratio and Zinc Content Measurement Double Dilution Mass Spectrometry

(U.S.) Ford Automotive Standards, Mass Ratio and Volume Ratio

FORD FLTM EU-BI 054-1-2001 DETERMINATION OF THE SPECIFIC DENSITY OF SOLID CONTENT OF BAKED ENAMELS AND PRIMER FILMS

未注明发布机构, Mass Ratio and Volume Ratio

BS EN 772-9:1998(2005) Methods of test for masonry units — Part 9 : Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling
BS ISO 13160:2012 Water quality — Strontium 90 and strontium 89 — Test methods using liquid scintillation counting or proportional counting

VN-TCVN, Mass Ratio and Volume Ratio

TCVN 4411-1987 Canned foods.Method for determination of net mass and components rate

Indonesia Standards, Mass Ratio and Volume Ratio

SNI 7656-2012 Tata cara pemilihan campuran untuk beton normal, beton berat dan beton massa

API - American Petroleum Institute, Mass Ratio and Volume Ratio

API MPMS 11.1 VOL XIII-1982 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume XIII Table 5D-Generalized Lubricating Oils Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6D-Generalized Lubricating Oils Correction of Volu
API MPMS 11.1 VOL II-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume II Table 5B - Generalized Products Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6B - Generalized Products Correction of Volume to 60 Degre
API MPMS 17.7-1995 Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 7 - Recommended Practices for Developing Barge Control Factors (Volume Ratio) (First Edition)
API PUBL 4540-1992 Area and Volume Source Air Quality Model Performance Evaluation Phase II Final Report

RO-ASRO, Mass Ratio and Volume Ratio

STAS SR 13237-1994 Building physics. Heat engineering. Determination of volume percentage of open and closed cells of rigid materials.
STAS 8334-1989 Industrial-process measurement and control equipments ANALOGICAL PNEUMATIC DEVICES General technical requirements for quality

Standard Association of Australia （SAA）, Mass Ratio and Volume Ratio

AS 1141.30.1:2009
AS/NZS 1301.426S:2015 Methods of test for pulp and paper, Method 426S: Paper and board — Determination of thickness, density and specific volume
AS 1141.30:1996 Methods for sampling and testing of aggregates - Coarse aggregate quality by visual comparison
AS 1141.30.1:2022 Methods for sampling and testing aggregates, Method 30.1: Coarse aggregate quality by visual comparison

IN-BIS, Mass Ratio and Volume Ratio

Hebei Provincial Standard of the People's Republic of China, Mass Ratio and Volume Ratio

DB13/T 2768.4-2018 Graphene powder material detection method part 4: specific surface area, pore volume and pore diameter BET method

ETSI - European Telecommunications Standards Institute, Mass Ratio and Volume Ratio

EG 201 377-1-2009 Speech and multimedia Transmission Quality (STQ); Specification and measurement of speech transmission quality; Part 1: Introduction to objective comparison measurement methods for one-way speech quality across networks (V1.3.2)
EG 201 377-1-1999 Speech Processing@ Transmission and Quality Aspects (STQ); Specification and Measurement of Speech Transmission Quality; Part 1: Introduction to Objective Comparison Measurement Methods for One-Way Speech Quality Across Networks (V1.1.1)
EG 201 377-1-2002 Speech Processing@ Transmission and Quality Aspects (STQ); Specification and Measurement of Speech Transmission Quality; Part 1: Introduction to Objective Comparison Measurement Methods for One-Way Speech Quality Across Networks (V1.2.1)

International Telecommunication Union (ITU), Mass Ratio and Volume Ratio

ITU-T P.1202-2012 Parametric non-intrusive bitstream assessment of video media streaming quality (Study Group 12)

Alliance of Telecommunications Industry Solutions （ATIS), Mass Ratio and Volume Ratio

ATIS 0800061-2013 Methodology for Subjective or Objective Video Quality Assessment in Multiple Bit Rate Adaptive Streaming

ATIS - Alliance for Telecommunications Industry Solutions, Mass Ratio and Volume Ratio

0800061-2013 Methodology for Subjective or Objective Video Quality Assessment in Multiple Bit Rate Adaptive Streaming

PL-PKN, Mass Ratio and Volume Ratio

PN-EN IEC 61788-4-2020-12 E Superconductivity -- Part 4: Residual resistance ratio measurement -- Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (IEC 61788-4:2020)

BELST, Mass Ratio and Volume Ratio

STB GOST R 8.667-2012 System for ensuring the uniformity of measurements of the Republic of Belarus. State verification schedule for means measuring energy of combustion, specific energy of combustion and volumetric energy of combustion (combustion calorimeters)

AT-ON, Mass Ratio and Volume Ratio

ONORM S 1407-1976 Textile floor coverings; determination of surface pile density and pile fibre volume ratio of pile carpets

TH-TISI, Mass Ratio and Volume Ratio

TIS 1780.1-2000 General methods of test for pigments and extenders.part 1: comparison of colour of pigments
TIS 1780.10-1999 General methods of test for pigments and extenders.part 10: determination of density-pyknometer method

TR-TSE, Mass Ratio and Volume Ratio

TS 2744-1977 Clays Used For Ceramicware Particle-Size Analysis By Hydrometer find Pipet Methods

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Mass Ratio and Volume Ratio

ASHRAE MN-00-1-3-2000 Computer Analysis and Comparison of Experimental Data for Moisture Accumulation in Concrete Masonry Walls (See Technical Paper 4406@ p.347)
ASHRAE 105-2014 Standard Methods of Measuring@ Expressing and Comparing Building Energy Performance and Greenhouse Gas Emissions

AT-OVE/ON, Mass Ratio and Volume Ratio

OVE EN IEC 61788-4:2021 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (( IEC 61788-4:2020) EN IEC 61788-4:2020) (german version)

CEN - European Committee for Standardization, Mass Ratio and Volume Ratio

EN ISO 787-22:2017 General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments
EN ISO 787-21:2017 General methods of test for pigments and extenders - Part 21: Comparison of heat stability of pigments using a stoving medium

Institute of Electrical and Electronics Engineers (IEEE), Mass Ratio and Volume Ratio

Comparative Analysis of Anthropometric Methods: Pa IEEE SA 3D Body Processing Industry Connections--Comparative Analysis of Anthropometric Methods: Past, Present, and Future
Comparative Analysis of Anthropometric Methods: Past, Present, and Future IEEE SA 3D Body Processing Industry Connections--Comparative Analysis of Anthropometric Methods: Past, Present, and Future
IEEE Industry Connections (IEEE-IC) Landmarks and IEEE Industry Connections (IEEE-IC) Landmarks and Measurement Standards Comparison in 3D Body-model Processing

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Mass Ratio and Volume Ratio

IEEE SA IC-2018 Industry Connections (IEEE‐IC) Landmarks and Measurement Standards Comparison in 3D Body‐model Processing

National Aeronautics and Space Administration (NASA), Mass Ratio and Volume Ratio

NASA NACA-TR-825-1945 Analysis of wind-tunnel stability and control tests in terms of flying qualities of full-scale airplanes