ZH

RU

ES

volume ratio to mass ratio

volume ratio to mass ratio, Total:179 items.

In the international standard classification, volume ratio to mass ratio involves: Conducting materials, Testing of metals, Electricity. Magnetism. Electrical and magnetic measurements, Products of non-ferrous metals, Soil quality. Pedology, Electrical wires and cables, Textile fibres, Packaging and distribution of goods in general, Products of the chemical industry, Powder metallurgy, Particle size analysis. Sieving, Measurement of fluid flow, Paints and varnishes, Cellular materials, Cereals, pulses and derived products, Construction materials, Thermodynamics and temperature measurements, Quality, Surface treatment and coating, Refractories, Milk and milk products, Equipment for petroleum and natural gas industries, Aircraft and space vehicles in general, Non-textile floor coverings, Analytical chemistry, Air quality, Welding, brazing and soldering, Linear and angular measurements, Geology. Meteorology. Hydrology, Water quality, Metrology and measurement in general, Astronomy. Geodesy. Geography, Petroleum products in general, Electronic components in general.


Danish Standards Foundation, volume ratio to mass ratio

  • DS/EN 61788-12:2002 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • DS/EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • DS/EN 61788-5:2001 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • DS/EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • DS/EN ISO 4590:2003 Rigid cellular plastics - Determination of thevolume percentage of open cells and of closed cells
  • DS/EN ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
  • DS/EN ISO 14956:2003 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty

European Committee for Electrotechnical Standardization(CENELEC), volume ratio to mass ratio

  • EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • EN 61788-5:2001 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, volume ratio to mass ratio

  • GB/T 22587-2008 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • GB/T 31522-2015 Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<下标3>Sn composite superconducting wires
  • GB/T 22587-2017 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • GB/T 19587-2017 Determination of the specific surface area of solids by gas adsorption using the BET method
  • GB/T 19587-2004 Determination of the specific surface area of solids by gas adsorption using the BET method
  • GB/T 42490-2023 Soil quality Determination of organic carbon content and carbon isotope ratio, total nitrogen content and nitrogen isotope ratio in soil and biological samples Stable isotope ratio mass spectrometry
  • GB/T 42310-2023 Determination of specific surface area of nanotechnology graphene powder by argon adsorption static capacity method

Lithuanian Standards Office , volume ratio to mass ratio

  • LST EN 61788-5-2002 Superconductivity. Part 5: Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors (IEC 61788-5:2000)
  • LST EN 61788-12-2003 Superconductivity. Part 12: Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2002)
  • LST EN 61788-12-2014 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013)
  • LST EN ISO 4590:2004 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2002)
  • LST ISO 7033:1995 Fine and coarse aggregates for concrete. Determination of particle mass-per-volume and water absorption. Pyknometer method
  • LST EN ISO 14956:2004 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002)

CENELEC - European Committee for Electrotechnical Standardization, volume ratio to mass ratio

  • EN 61788-12:2002 Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires

British Standards Institution (BSI), volume ratio to mass ratio

  • BS EN 61788-12:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • BS EN 61788-12:2002 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • BS EN 61788-12:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • BS EN 61788-5:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • BS EN 61788-5:2001 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • BS EN 61788-5:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • BS ISO 6421:2012 Hydrometry. Methods for assessment of reservoir sedimentation
  • BS EN 61788-4:2016 Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • BS EN ISO 4590:2016 Tracked Changes. Rigid cellular plastics. Determination of the volume percentage of open cells and of closed cells
  • BS ISO 12154:2014 Determination of density by volumetric displacement. Skeleton density by gas pycnometry
  • BS 6169-2:1984 Methods for volumetric measurement of liquid hydrocarbons - Turbine meter systems
  • BS 4359-1:1996 Determination of the specific surface area of powders. BET method of gas adsorption for solids (including porous materials)
  • BS PD CEN/TR 15996:2010 Hydrometry — Measurement of snow water equivalent using snow mass registration devices
  • BS ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials

ES-UNE, volume ratio to mass ratio

  • UNE-EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (Endorsed by AENOR in November of 2013.)
  • UNE-EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (Endorsed by AENOR in October of 2013.)
  • UNE-EN ISO 4590:2017 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016)
  • UNE 43312:1982 ERRATUM:2011 Glass hydrometers. Conventional value for the thermal cubic-expansion coefficient (for use in the preparation of measurement tables for liquids)

Korean Agency for Technology and Standards (KATS), volume ratio to mass ratio

  • KS C IEC 61788-5-2016(2021) Superconductivity-Part 5:Matrix to superconductor volume ratio measurement-Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • KS C IEC 61788-5:2016 Superconductivity-Part 5:Matrix to superconductor volume ratio measurement-Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • KS I ISO 11461:2005 Soil quality-Determination of soil water content calculatedon a volume basis(Gravimetric method)
  • KS T 1303-2022 Determination of ratio of spatial volume to total packaging volume for commercial packaging(consumer packaging)
  • KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
  • KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
  • KS A 0094-2014 Determination of the specific surface area of powders(solids) by gas adsorption method
  • KS A 0094-2003 Determination of the specific surface area of solids by gas adsorption method
  • KS L 3519-2017(2022) Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
  • KS L 3519-1987 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
  • KS L 3519-1982 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
  • KS L 3519-2017 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
  • KS L 3519-1997 Testing method for bulk specific gravity of light weight castable refractories(method for molded goods)
  • KS M ISO 3233-2002(2012) Paints and varnishes-Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
  • KS M ISO 21687:2011 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
  • KS M ISO 21687:2016 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
  • KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials
  • KS I ISO 14956-2008(2018) Air quality-Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty

KR-KS, volume ratio to mass ratio

  • KS C IEC 61788-5-2016 Superconductivity-Part 5:Matrix to superconductor volume ratio measurement-Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • KS M ISO 21687-2016 Carbonaceous materials used in the production of aluminium-Determination of density by gas pyknometry (volumetric) using helium as the analysis gas-Solid materials

Japanese Industrial Standards Committee (JISC), volume ratio to mass ratio

  • JIS H 7304:2002 Superconductivity -- Part 5: Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • JIS H 7304:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • JIS H 7308:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • JIS H 7308:2006 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • JIS H 7503:2003 Method for measurement of cavity volume fraction of superplastically deformed metallic materials

International Electrotechnical Commission (IEC), volume ratio to mass ratio

  • IEC 61788-12:2013 Superconductivity.Part 12: Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<(Index)3>Sn composite superconducting wires
  • IEC 61788-5:2013 Superconductivity.Part 5: Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires

International Organization for Standardization (ISO), volume ratio to mass ratio

  • ISO 11461:2001 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
  • ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
  • ISO 12154:2014 Determination of density by volumetric displacement - Skeleton density by gas pycnometry
  • ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio
  • ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
  • ISO 21687:2007 Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials
  • ISO/FDIS 10563 Building and civil engineering sealants — Determination of change in mass and volume

Association Francaise de Normalisation, volume ratio to mass ratio

  • NF C31-888-5*NF EN 61788-5:2014 Superconductivity - Part 5 : matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • NF C31-888-12:2003 Supraconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires.
  • NF C31-888-12*NF EN 61788-12:2014 Superconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • NF EN 61788-12:2014 Supraconductivité - Partie 12 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/non-cuivre des fils en composite supraconducteur Nb3Sn
  • NF EN 61788-5:2014 Supraconductivité - Partie 5 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/supraconducteur des fils en composite supraconducteur Cu/Nb-Ti
  • NF EN ISO 18757:2006 Céramiques techniques - Détermination de la surface spécifique (aire massique) des poudres céramiques par adsorption de gaz à l'aide de la méthode BET
  • NF EN ISO 4590:2016 Plastiques alvéolaires rigides - Détermination du pourcentage volumique de cellules ouvertes et de cellules fermées
  • NF V03-719:1996 Cereals. Determination of bulk density, called "mass per hectolitre".
  • NF X11-621:1975 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. B.E.T. method:volumetric measurement of the adsorption of nitrogen at low temperatures.
  • NF C31-888-4*NF EN 61788-4:2016 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • NF EN ISO 3233-3:2015 Peintures et vernis - Détermination du pourcentage en volume de matière non-volatile - Partie 3 : détermination par calcul à partir de la teneur en matière non volatile déterminée conformément à l'ISO 3251, de la masse volumique du produit de...
  • NF X43-508*NF EN ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty

European Committee for Standardization (CEN), volume ratio to mass ratio

  • EN ISO 11461:2014 Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method
  • EN ISO 4590:2016 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells

Hunan Provincial Standard of the People's Republic of China, volume ratio to mass ratio

  • DB43/T 1142-2015 Quantitative Analysis Method of Hollow Polyester Fiber - Number Ratio and Mass Ratio

NL-NEN, volume ratio to mass ratio

  • NEN 6311-1983 Vegetable and animal oils and fats Determination of the conventional mass by volume and of the relative density
  • NEN 6311-1993 Vegetable and animal oils and fats. Determination of the conventional mass by volume and of the relative density

GOSTR, volume ratio to mass ratio

  • PNST 289-2018 Russian system of quality. Comparative testing of men's socks and stockings
  • PNST 275-2018 Russian system of quality. Comparative testing of children's socks and stockings
  • PNST 292-2018 Russian system of quality. Comparative testing of Condensed sweetened milk
  • PNST 256-2017 Russian system of qualiti. Comparative testing of quit blanket
  • PNST 287-2018 Russian system of quality. Comparative testing of kvases
  • PNST 253-2017 Russian system of quality. Comparative testing of bed-clothes
  • PNST 335-2018 Russian system of quality. Comparative testing of men's suits
  • PNST 258-2017 Russian system of quality. Comparative testing of cotton terry jack-towels
  • PNST 286-2018 Russian system of quality. Comparative testing of ring–shaped rolls
  • PNST 285-2018 Russian system of quality. Comparative testing of trousers for boys of school age
  • PNST 291-2018 Russian system of quality. Comparative testing of cranberry mors
  • PNST 290-2018 Russian system of quality. Comparative testing of food chicken eggs
  • PNST 336-2018 Russian system of quality. Comparative testing of sprats in oil
  • PNST 259-2017 Russian system of quality. Comparative testing of pillows with fibre filler
  • PNST 333-2018 Russian system of quality. Comparative testing of preserves from herring fillet in oil
  • PNST 293-2018 Russian system of quality. Comparative testing of structured product from fish mince - crab sticks
  • PNST 334-2018 Russian system of quality. Comparative testing of Jackets with a filling of artificial materials requirements
  • PNST 288-2018 Russian system of quality. Comparative testing of sarafans and skirts for girls of school age

AGMA - American Gear Manufacturers Association, volume ratio to mass ratio

German Institute for Standardization, volume ratio to mass ratio

  • DIN EN 61788-12:2014 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013); German version EN 61788-12:2013
  • DIN EN 61788-5:2014 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (IEC 61788-5:2013); German version EN 61788-5:2013
  • DIN 53219:2005 Paints and varnishes - Determination of percentage volume of non-volatile matter
  • DIN EN ISO 4590:2016-12 Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016); German version EN ISO 4590:2016
  • DIN 19683-13:2007-07 Soil quality - Physical laboratory tests - Part 13: Determination of soil volume percentage, total pore volume and pore number of mineral soils
  • DIN 19683-14:2007-07 Soil quality - Physical laboratory tests - Part 14: Determination of soild volume percentage of bog soils
  • DIN 51913:2013-05 Testing of carbonaceous materials - Determination of density by gas pycnometer (volumetric) using helium as the measuring gas - Solid materials
  • DIN 9020-3:1983-10 Aerospace; mass breakdown for aircraft heavier than air; group mass statement
  • DIN 9020-2:1983 Aerospace; mass breakdown for aircraft heavier than air; main mass groups and terms of mass; definitions
  • DIN 9020-3 Beiblatt 1:1983-10 Aerospace; mass breakdown for aircraft heavier than air; group mass statement; condensed version
  • DIN 9020-3 Beiblatt 1:1983 Aerospace; mass breakdown for aircraft heavier than air; group mass statement; condensed version
  • DIN 12803-2:1981 Laboratory glassware; alcoholometry; alcoholometers for the alcoholic strength by volume
  • DIN 19529:2015 Leaching of solid materials - Batch test for the examination of the leaching behaviour of inorganic and organic substances at a liquid to solid ratio of 2 l/kg
  • DIN EN ISO 14956:2003-01 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty (ISO 14956:2002); German version EN ISO 14956:2002

YU-JUS, volume ratio to mass ratio

  • JUS H.B8.239-1988 Ethanot for industrial use. Determination of methanol content (methanol contents between 0,10 and 1J50% (V/V)). Visualcolorimetricmethod
  • JUS H.G8.210-1985 Reagents. Methanct. Determination of free acidcontent (as HCOOH). Volumetric method

CL-INN, volume ratio to mass ratio

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., volume ratio to mass ratio

  • ASHRAE 4406-2000 Computer Analysis and Comparison of Experimental Data for Moisture Accumulation in Concrete Masonry Walls

American Society of Mechanical Engineers (ASME), volume ratio to mass ratio

Taiwan Provincial Standard of the People's Republic of China, volume ratio to mass ratio

  • CNS 11151-1984 Method of Test for Unit Weight, Yield, and Air Content (Gravimetric) of Concrete

Professional Standard - Agriculture, volume ratio to mass ratio

  • JB/T 51220.1-1994 Compound and specific gravity seed cleaning machine product quality classification and other quality indicators
  • JB/T 51220.2-1994 Test method for product quality classification of compound and specific gravity seed cleaners

BE-NBN, volume ratio to mass ratio

RU-GOST R, volume ratio to mass ratio

  • PNST 254-2017 Russian system of quality. Comparative testing of rice groats
  • PNST 255-2017 Russian system of quality. Comparative testing of food common salt
  • PNST 257-2017 Russian system of quality. Comparative testing of buckwheat groats
  • PNST 281-2018 Russian system of quality. Comparative testing of shirts for men
  • PNST 280-2018 Russian system of quality. Comparative testing of pure natural honey
  • PNST 260-2017 Russian system of quality. Comparative testing of unsalted butter
  • PNST 279-2018 Russian system of quality. Comparative testing of wheat bakery flour of high grade
  • GOST R 54076-2010 Cheese and cheese products. Conductometric method for determination of sodium chloride mass fraction
  • PNST 276-2018 Russian system of quality. Comparative testing of casual shoes with uppers of leather
  • GOST R 51454-1999 Caseins and caseinates. Method of determination of nitrate and nitrite contents
  • GOST R ISO 14956-2007 Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
  • PNST 274-2018 Russian system of quality. Comparative testing of shirts for children and teen-agers
  • GOST R ISO 21687-2014 Carbonaceous materials for the production of aluminium. Determination of density by gas pyknometry (volumetric) using helium as the analysis gas. Solid materials
  • PNST 252-2017 Russian system of quality. Comparative testing of grained salmon caviar packed in cans
  • GOST R 51459-1999 Cheese and processed cheese products. Method of determination of mass percent of citric acid
  • GOST R ISO 15612-2009 Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure
  • PNST 277-2018 Russian system of quality. Comparative testing of mobile applications for smartphones
  • GOST R 8.618-2006 State system for ensuring the uniformity of measurements. State verification schedule for means measuring volume and mass flow of gas
  • PNST 272-2018 Russian system of quality. Comparative testing of knitted underwear for preschool and school age children
  • GOST R 8.667-2009 State system for ensuring the uniformity of measurements. State verification schedule for means measuring energy of combustion, specific energy of combustion and volumetric energy of combustion (combustion calorimeters)
  • GOST R 50730.5-1995 Microwave ferrite devices. Methods of measurement of voltage standing wave ratio (VSWR) and maximum VSWR at high power level
  • GOST R 51458-1999 Cheese and processed cheese products. Determination of mass percent of total phosphorus. Molecular absorption spectrometric method
  • PNST 273-2018 Russian system of quality. Comparative testing of knitted underwear for newborn babies and infants of nursery age
  • PNST 278-2018 Russian system of quality. Comparative testing of water-dispersive paints with antibacterial effect

American Society for Testing and Materials (ASTM), volume ratio to mass ratio

  • ASTM D6093-97(2011) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
  • ASTM D6093-97(2022) Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
  • ASTM D2421-19 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis
  • ASTM D2421-18 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis

IT-UNI, volume ratio to mass ratio

PT-IPQ, volume ratio to mass ratio

  • E 209-1967
  • NP EN 772-2-2001 Methods of test for masonry units Part 2:Determination of percentage area of voids in aggregate concrete masonry units(by paper indentation)

CZ-CSN, volume ratio to mass ratio

  • CSN ISO 7033:1993 Fine and coarse aggregates for concrete. Determination of the particle mass-per-volume and water absorption. Pyknometer method

AENOR, volume ratio to mass ratio

  • UNE 40242-1:1974 CARPETS. DETERMINATION OF MEASURED SURFACE PILE DENSITY AND MEASURED PILE FIBRE VOLUME RATIO.
  • UNE-EN ISO 14956:2003 Air quality. Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty. (ISO 14956:2002)

ACI - American Concrete Institute, volume ratio to mass ratio

  • ACI 211.1-1991 Standard Practice for Selecting Proportions for Normal@ Heavyweight@ and Mass Concrete

API - American Petroleum Institute, volume ratio to mass ratio

  • API MPMS 11.1 VOL XIII-1982 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume XIII Table 5D-Generalized Lubricating Oils Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6D-Generalized Lubricating Oils Correction of Volu
  • API MPMS 11.1 VOL II-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume II Table 5B - Generalized Products Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6B - Generalized Products Correction of Volume to 60 Degre

Heilongjiang Provincial Standard of the People's Republic of China, volume ratio to mass ratio

  • DB23/T 1830-2017 Quality inspection and acceptance of surveying and mapping geographic information results Part 1: Large-scale topographic maps

International Telecommunication Union (ITU), volume ratio to mass ratio

  • ITU-T P.1202-2012 Parametric non-intrusive bitstream assessment of video media streaming quality (Study Group 12)

Alliance of Telecommunications Industry Solutions (ATIS), volume ratio to mass ratio

  • ATIS 0800061-2013 Methodology for Subjective or Objective Video Quality Assessment in Multiple Bit Rate Adaptive Streaming

ATIS - Alliance for Telecommunications Industry Solutions, volume ratio to mass ratio

  • 0800061-2013 Methodology for Subjective or Objective Video Quality Assessment in Multiple Bit Rate Adaptive Streaming




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved