ZH
RU
ES

difference between two curves

difference between two curves, Total:45 items.

In the international standard classification, difference between two curves involves: Power transmission and distribution networks, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Rubber and plastics products, Iron and steel products, Linear and angular measurements, Materials for aerospace construction, Optics and optical measurements, Thermodynamics and temperature measurements, Plastics, Products of the textile industry, Welding, brazing and soldering, Rubber, Measurement of volume, mass, density, viscosity, Electrical engineering in general.

RO-ASRO, difference between two curves

• STAS 7394-1966

Group Standards of the People's Republic of China, difference between two curves

• T/QGCML 183-2021 Low-voltage line differential protection device connected by current loop cables on both sides
• T/QGCML 183-2023 Low-voltage line differential protection device connected with current loop cables on both sides

Institute of Electrical and Electronics Engineers (IEEE), difference between two curves

• IEEE 1459-2010 Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions
• IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions

German Institute for Standardization, difference between two curves

• DIN 16901:1982 Plastics mouldings; Tolerances and acceptance conditions for linear dimensions
• DIN CEN/TS 14159:2007 Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat; German version CEN/TS 14159:2007
• DIN EN ISO 11357-5:2014-07 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version EN ISO 11357-5:2014
• DIN EN 14159:2015 Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat; German version EN 14159:2014
• DIN 53014-2:1994 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections
• DIN 53014-2:1994-02 Viscometry; capillary viscometers with circular and rectangular cross section for determination of flow curves; systematic deviations, sources and corrections

Korean Agency for Technology and Standards (KATS), difference between two curves

• KS D 3051-2002(2017) Dimensions, weight and tolerances of hot rolled steel bars and bar in coil
• KS M ISO 11357-5:2007 Plastics-Differential scanning calorimetry(DSC)-Part 5:Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
• KS M ISO 11357-5:2015 Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
• KS M ISO 11357-5-2015(2020) Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

Society of Automotive Engineers (SAE), difference between two curves

• SAE AMS2261K-2012 Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy, Bars, Rods, and Wire

American Society for Testing and Materials (ASTM), difference between two curves

• ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
• ASTM F2771-10 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
• ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions

British Standards Institution (BSI), difference between two curves

• BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
• BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
• BS EN 14159:2014 Textile floor coverings. Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
• BS DD CEN/TS 14159:2007 Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat
• BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
• BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
• BS EN 60909-3:2004 Short-circuit current calculation in three-phase a.c. systems - Currents during two separate simultaneous single phase line-to- earth short circuits and partial short-circuit currents flowing through earth
• BS EN 60909-3:2010 Short-circuit currents in three-phase a.c systems - Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth

Association Francaise de Normalisation, difference between two curves

• NF EN IEC 61788-24:2018 Supraconductivité - Partie 24 : mesurage du courant critique - Courant critique retenu après double flexion à température ambiante des fils supraconducteurs Bi-2223 avec gaine Ag
• NF T51-507-5*NF EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5 : determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
• NF EN ISO 11357-5:2014 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 5 : détermination des températures et temps caractéristiques de la courbe de réaction, de l'enthalpie de réaction et du degré de transformation

International Organization for Standardization (ISO), difference between two curves

• ISO 7284:1993 Resistance welding equipment; particular specifications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry
• ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
• ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

RU-GOST R, difference between two curves

• GOST R 56755-2015 Plastics. Differential scanning calorimetry (DSC). Part 5. Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, difference between two curves

• GB/T 19466.5-2022 Plastics—Differential scanning calorimetry (DSC)—Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
• GB/T 25299-2010 Resistance welding equipment.Particular specifications applicable to transformers with two separate secondary windings for multi-spot welding,as used in the automobile industry

European Committee for Standardization (CEN), difference between two curves

• EN ISO 7284:1996 Resistance Welding Equipment - Particular Specifications Applicable to Transformers with Two Separate Secondary Windings for Multi-Spot Welding as Used in the Automobile Industry ISO 7284: 1993
• EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times@ enthalpy of reaction and degree of conversion

United States Navy, difference between two curves

• NAVY MIL-I-22444 C NOTICE 2-2000 INSULATION TAPE, ELECTRICAL, SELF-BONDING, SILICONE RUBBER TREATED BIAS WEAVE OR SINUSOIDAL WEAVE GLASS, CABLE SPLICING, NAVAL SHIPBOARD
• NAVY MIL-I-22444 C VALID NOTICE 1-1988 INSULATION TAPE, ELECTRICAL, SELF-BONDING, SILICONE RUBBER TREATED BIAS WEAVE OR SINUSOIDAL WEAVE GLASS, CABLE SPLICING, NAVAL SHIPBOARD
• NAVY MIL-I-22444 C-1968 INSULATION TAPE, ELECTRICAL, SELF-BONDING, SILICONE RUBBER TREATED BIAS WEAVE OR SINUSOIDAL WEAVE GLASS, CABLE SPLICING, NAVAL SHIPBOARD

AENOR, difference between two curves

• UNE-EN ISO 11357-5:2015 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)

International Telecommunication Union (ITU), difference between two curves

• ITU-R S.1589 FRENCH-2002 Continuous curves of epfd versus geostationary fixed-satellite service earth station antenna diameter and epfd versus geostationary fixed-satellite service space station antenna beamwidth to indicate the protection afforded by systems complying with the l
• ITU-R S.1589 SPANISH-2002 Continuous curves of epfd versus geostationary fixed-satellite service earth station antenna diameter and epfd versus geostationary fixed-satellite service space station antenna beamwidth to indicate the protection afforded by systems complying with the l

ETSI - European Telecommunications Standards Institute, difference between two curves

• ETSI EN 301 489-3:2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Harmonized EN for ElectroMagnetic Compatibility (EMC) of Radio Communications Equipment and Services; Part 3: Specific Conditions for Short-Range Devices (SRD) Operating on Frequencies betwee

Others:   The error of the two curves, Consistency of two curves, Deviation of two curves, The relative error of the two curves, Error Squared Curve of Two Curves, Best Deviation of Two Curves, The degree of error of the two curves, The relative deviation of the two curves, Deviation of two curves, difference between two curves, Differential Thermal Curve of Indium, The total error of the two curves, Deviation between two curves, Accuracy of two curves.