ZH
RU
ES

Accuracy of two curves

Accuracy of two curves, Total:54 items.

In the international standard classification, Accuracy of two curves involves: Machine tools, Industrial automation systems, Chipless working equipment, Woodworking equipment, Optics and optical measurements, Iron and steel products, Quality.


HU-MSZT, Accuracy of two curves

RO-ASRO, Accuracy of two curves

  • STAS 13119-1992 Power presses with shut bed, with simple operation and two cranks. Indications on accuracy

Association Francaise de Normalisation, Accuracy of two curves

  • NF E60-126:1984 Acceptance conditions for surface grinding machines with two columns. Machines for grinding slideways. Testing of the accuracy.
  • NF E60-140*NF ISO 14137:2015 Test conditions for wire electrical-discharge machines (wire EDM) - Testing of the accuracy
  • NF E64-063:1982 Woodworking machines. Conditions of acceptance and nomenclature for two, three, four side moulding machines. Accuracy testing.
  • NF E64-058:1982 Woodworking machines. Conditions of acceptance and nomenclature for planing machines for two, three or four-side dressing. Accuracy testing.
  • NF ISO 10791-4:1998 Conditions d'essai pour centres d'usinage - Partie 4 : précision et répétabilité de positionnement des axes linéaires et rotatifs.
  • NF ISO 13041-4:2004 Conditions d'essai des tours à commande numérique et des centres de tournage - Partie 4 : précision et répétabilité de positionnement des axes linéaires et rotatifs

NO-SN, Accuracy of two curves

  • NS 5026-1982 Test conditions for vertical turning and boring lathes with one or two columns - Testing of accuracy
  • NS 5025-1982 Test conditions for vertical turning and boring lathes with one or two columns - Testing of accuracy - General introduction

AENOR, Accuracy of two curves

  • UNE 15317:2004 Surface grinding machines with two columns. Machines for grinding slideways. Test conditions. Testing of the accuracy.
  • UNE 15331-4:2005 Test conditions for numerically controlled turning machines and turning centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes
  • UNE 15322:1992 ACCEPTANCE CONDITIONS FOR VERTICAL TURNING AND BORING LATHES WITH ONE OR TWO COLUMNS AND A SINGLE FIXED OR MOVABLE TABLE. GENERAL INTRODUCTION AND TESTING OF THE ACCURACY.
  • UNE 15450-4:2000 Machine-tools. Test conditions for machining centres. Part 4: Accuracy and repeatability of positioning of linear and rotary axes.

Korean Agency for Technology and Standards (KATS), Accuracy of two curves

  • KS B ISO 14137:2021 Test conditions for wire electrical-discharge machines(wire EDM) — Testing of the accuracy
  • KS B ISO 14137:2016 Machine tools — Test conditions for wire electrical-discharge machines(wire EDM) — Terminology and testing of the accuracy
  • KS B ISO 4703:2019 Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy
  • KS B ISO 13041-4:2010 Test conditions for numerically controlled turning machines and turning centres-Part 4:Accuracy and repeatability of positioning of linear and rotary axes
  • KS B ISO 13041-4:2014 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
  • KS B ISO 14137-2016(2021) Machine tools — Test conditions for wire electrical-discharge machines(wire EDM) — Terminology and testing of the accuracy
  • KS B ISO 10791-4:2014 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
  • KS B ISO 10791-4:2012 Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
  • KS B ISO 10791-4:2016 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
  • KS B ISO 10791-4-2016(2021) Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
  • KS B ISO 10791-4:2021 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
  • KS B ISO 13041-4:2018 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes

KR-KS, Accuracy of two curves

  • KS B ISO 14137-2021 Test conditions for wire electrical-discharge machines(wire EDM) — Testing of the accuracy
  • KS B ISO 4703-2019 Test conditions for surface grinding machines with two columns — Machines for grinding slideways — Testing of the accuracy
  • KS B ISO 10791-4-2016 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
  • KS B ISO 10791-4-2021 Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
  • KS B ISO 13041-4-2018 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes
  • KS B ISO 13041-4-2022 Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes

Professional Standard - Machinery, Accuracy of two curves

  • JB/T 8772.4-1998 Test conditions of precision machining centres.Part 4:Accuracy and repeatability
  • JB/T 8771.4-1998 Test conditions of machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Accuracy of two curves

  • GB/T 20957.4-2007 Test conditions for precision machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
  • GB/T 18400.4-2010 Test conditions for machining centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes
  • GB/T 16462.4-2007 Test conditions for numerically controlled turning machines and turning centres.Part 4:Accuracy and repeatability of positioning of linear and rotary axes

International Organization for Standardization (ISO), Accuracy of two curves

  • ISO 10791-4:1998 Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
  • ISO 3655:1986 Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table — General introduction and testing of the accuracy
  • ISO 13041-4:2004 Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes

Japanese Industrial Standards Committee (JISC), Accuracy of two curves

  • JIS B 6360:2017 Test conditions for wire electrical-discharge machines (wire EDM) -- Testing of the accuracy
  • JIS B 6360:2006 Machine tools -- Test conditions for wire electrical-discharge machines (wire EDM) -- Testing of the accuracy
  • JIS B 6331-4:2006 Test conditions for numerically controlled turning machines and turning centres -- Part 4: Accuracy and repeatability of positioning of linear and rotary axes

German Institute for Standardization, Accuracy of two curves

  • DIN ISO 10791-4:2001 Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)
  • DIN ISO 10791-4:2001-01 Machine tools - Test conditions for machining centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes (ISO 10791-4:1998)

VN-TCVN, Accuracy of two curves

  • TCVN 7678-2007 Machine tools.Test conditions for wire electrical-discharge machines (wire EDM).Terminology and testing of the accuracy
  • TCVN 7681-4-2007 Test conditions for numerically controlled turning machine and turning centres.Part 4: Accuracy and repeatability of positioning of linear and rotary axes

American Society for Testing and Materials (ASTM), Accuracy of two curves

  • ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
  • ASTM F2771-10 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
  • ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
  • ASTM E122-09 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

RU-GOST R, Accuracy of two curves

  • GOST 14080-1978 Precision alloy strip with specified temperature coefficient of linear expansion. Specifications

British Standards Institution (BSI), Accuracy of two curves

  • BS ISO 10791-4:1998 Test conditions for machining centres - Accuracy and repeatability of positioning of linear and rotary axes

American National Standards Institute （ANSI), Accuracy of two curves

  • ANSI/ASTM E122:2009 Practice For Calculating Sample Size To Estimate, With Specified Precision, The Average For A Characteristic Of A Lot Or Process

  The error of the two curves, Consistency of two curves, Deviation of two curves, The relative error of the two curves, Error Squared Curve of Two Curves, Best Deviation of Two Curves, The degree of error of the two curves, The relative deviation of the two curves, Deviation of two curves, difference between two curves, The total error of the two curves, Deviation between two curves, Accuracy of two curves.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved