ZH
RU
ES

analytical series standard curve method

analytical series standard curve method, Total:457 items.

In the international standard classification, analytical series standard curve method involves: Petroleum products in general, Hydraulic fluids, Analytical chemistry, Plastics, Paints and varnishes, Aerospace electric equipment and systems, Water quality, Non-ferrous metals, Products of the chemical industry, Rubber and plastics products, Fuels, Iron and steel products, Non-metalliferous minerals, Fruits. Vegetables, Testing of metals, Mechanical testing, Measurement of volume, mass, density, viscosity, Insulating materials, Applications of information technology, Optics and optical measurements, Test conditions and procedures in general, Photography, Ferrous metals, Microbiology, Nuclear energy engineering, Manufacturing processes in the rubber and plastics industries, Soil quality. Pedology, Lubricants, industrial oils and related products, Non-destructive testing, Components and accessories for telecommunications equipment, Linear and angular measurements, Fasteners, Paint ingredients, Wastes, Glass, Acoustics and acoustic measurements, Surface treatment and coating, Medical sciences and health care facilities in general, Fluid power systems, Elements of buildings, Telecommunication systems, Networking, On-board equipment and instruments, Construction materials, Hydraulic construction, Materials for aerospace construction, Company organization and management, Open systems interconnection (OSI), Capacitors, Quality, Mining equipment, Laboratory medicine, Environmental protection, Magnetic materials, Powder metallurgy.

German Institute for Standardization, analytical series standard curve method

DIN 55912-2 Bb.2:1999 Pigments - Titanium dioxide pigments - Methods of analysis; establishing a calibration graph using the X-ray fluorescence analysis
DIN ISO 16592:2015 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method (ISO 16592:2012)
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN EN 4056-002:2014-10 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards; German and English version EN 4056-002:2014
DIN 38402-51:1986 German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteris
DIN 38402-51:2017 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
DIN 38402-51:2015 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
DIN 38402-51:2017-05 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 51: Calibration of analytical methods - Linear calibration (A 51)
DIN 6867-3:2000 Sensitometry of screen-film systems for medical radiography - Part 3: Method for determination of sensitometric curve shape, speed and average gradient for mammography
DIN 6867-3:2013 Sensitometry of screen/film systems for medical radiography.Part 3: Method for determination of sensitometric curve shape, speed and average gradient for mammography
DIN EN 3155-015:2007 Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-015:2006
DIN EN 4641-401:2022-12 Aerospace series - Cables, optical 125 ?m diameter cladding - Part 401: Tight structure bend insensitive 50 µm/125 µm GI fibre nominal, 1,8 mm outside diameter Product standard; German and English version prEN 4641-401:2022 / Note: Date of issue 2...
DIN EN 4056-006:2014-10 Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - For operating temperatures -55 °C to 240 °C - Product standard; German and English version EN 4056-006:2014 / Note: Applies in conjunction with DIN EN 4056-001 (2008-02).
DIN EN 4056-002:2014 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards; German and English version EN 4056-002:2014
DIN EN 3373-007:2012-06 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard; German and English versio...
DIN EN 3218-007:2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 007: Plug with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-007:2006
DIN EN 3218-008:2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 008: Receptacle with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-008:2006
DIN EN 3373-008:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C - Product standard; German and English versio
DIN EN 4165-012:2007 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard; German and English version EN 4165-012:2005
DIN EN 3373-008:2012-06 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C - Product standard; German and English ve...

American Society for Testing and Materials (ASTM), analytical series standard curve method

ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6549-01 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-00 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-06(2015) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-06(2011) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7646-10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6549-06 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM E305-07 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM E305-13 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM D6482-99 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-23 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6482-01 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2011) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-10(2019) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6482-06(2016) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM E305-21 Standard Practice for Establishing and Controlling Spark Atomic Emission Spectrochemical Analytical Curves
ASTM D3864-06 Standard Guide for Continual On-Line Monitoring Systems for Water Analysis
ASTM D3864-96(2000) Standard Guide for Continual On-Line Monitoring Systems for Water Analysis
ASTM D3864-12(2021) Standard Guide for On-Line Monitoring Systems for Water Analysis
ASTM D3864-12 Standard Guide for On-Line Monitoring Systems for Water Analysis
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2465-11e1 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D4337-89(1995)e1 Standard Test Methods for Analysis of Linear Detergent Alkylates
ASTM D4337-89(2017) Standard Test Methods for Analysis of Linear Detergent Alkylates
ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM E572-94(2000) Standard Test Method for X-Ray Emission Spectrometric Analysis of Stainless Steel
ASTM D2885-95(1999) Standard Test Method for Research and Motor Method Octane Ratings Using On-Line Analyzers
ASTM E572-02a(2006)e1 Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM E572-02a(2006) Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM E572-02a Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM D2885-21 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM C1271-99(2006) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM C1271-99 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM E572-94(2000)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Stainless Steel
ASTM C1271-99(2020) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM D2885-08 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D2885-09 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM E539-11 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
ASTM E1085-09 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry
ASTM E2465-19 Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry
ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM C1271-99(2012) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
ASTM E1621-13 Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM C1416-99 Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence
ASTM C1416-04 Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence
ASTM C1416-04(2009) Standard Test Method for Uranium Analysis in Natural and Waste Water by X-Ray Fluorescence
ASTM E1695-95(2006)e1 Standard Test Method for Measurement of Computed Tomography (CT) System Performance
ASTM E2769-13 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-15 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2769-16 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D7235-21 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-10 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-21a Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM E831-06 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-05 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E3294-22 Standard Guide for Forensic Analysis of Geological Materials by Powder X-Ray Diffraction
ASTM E539-19 Standard Test Method for Analysis of Titanium Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E2186-02 Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay
ASTM E2186-02a Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay
ASTM E2186-02a(2010) Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay
ASTM C1455-07 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
ASTM E2465-11 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength-Dispersive X-Ray Fluorescence Spectrometry
ASTM E1085-22 Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E2465-13 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D6247-98(2004) Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry
ASTM E1031-96 Standard Test Method for Analysis of Iron-Making and Steel-Making Slags by X-Ray Spectrometry (Withdrawn 2002)
ASTM C1455-14 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
ASTM E2769-11 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D2332-84(2003) Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM E1621-94(1999) Standard Guide for X-Ray Emission Spectrometric Analysis
ASTM D2332-08 Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM E322-96(2004) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
ASTM E1621-22 Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E831-13 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E831-14 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D2332-13 Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM D6836-16 Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
ASTM E2465-06 Standard Test Method for Analysis of Ni-Base Alloys by X-ray Fluorescence Spectrometry
ASTM C1221-92(2004) Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
ASTM C1221-92(1998) Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
ASTM E572-02a(2006)e2 Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
ASTM D7751-11e1 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM C1221-10 Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
ASTM E1085-16 Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D7751-12 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D6122-19b Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-18 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM D6122-19a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
ASTM E1815-96 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1815-96(2001) Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1815-18 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM C1455-00 Standard Guide for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
ASTM D2332-13(2021) Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence
ASTM C1255-93(1999) Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
ASTM C1255-18 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
ASTM C1255-93(2005) Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
ASTM C1255-11 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
ASTM D7235-16 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM E1815-18(2023) Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM D8094-21 Standard Test Method for Determination of Water Content of Liquefied Petroleum Gases (LPG) Using an Online Electronic Moisture Analyzer
ASTM D8094-20 Standard Test Method for Determination of Water Content of Liquefied Petroleum Gases (LPG) Using an Online Electronic Moisture Analyzer
ASTM F1375-92(2012) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D5380-93(1998) Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
ASTM E572-12 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D7751-11 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM E322-12 Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM E572-13 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D5380-93(2014) Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM E539-90(1996)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of 6AI-4V Titanium Alloy
ASTM E539-02 Standard Test Method for X-Ray Emission Spectrometric Analysis of 6AI-4V Titanium Alloy
ASTM E539-07 Standard Test Method for X-Ray Fluorescence Spectrometric Analysis of 6Al-4V Titanium Alloy
ASTM E831-00 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E539-06 Standard Test Method for X-Ray Emission Spectrometric Analysis of 6Al-4V Titanium Alloy
ASTM E831-19 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D6052-97(2016) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM E692-00 Standard Test Method for Determining the Content of Cesium-137 in Irradiated Nuclear Fuels by High-Resolution Gamma-Ray Spectral Analysis
ASTM E692-08 Standard Test Method for Determining the Content of Cesium-137 in Irradiated Nuclear Fuels by High-Resolution Gamma-Ray Spectral Analysis
ASTM D5839-15(2023) Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM E1503-05 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
ASTM E1815-06 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1815-08(2013)e1 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM D5839-96(2001) Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D5839-96(2006) Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM E572-21 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D6247-98 Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry
ASTM D7165-10 Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels
ASTM F2980-13(2017) Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
ASTM F2980-13 Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
ASTM D6052-97(2023) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM E1503-06 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM E1503-12 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM E1503-97(2004) Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
ASTM E1503-14 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
ASTM D8127-17e1 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
ASTM C1605-04(2014) Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D7235-05 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D7235-14 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D5380-93(2009) Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
ASTM D6247-10 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM E1503-22 Standard Test Method for Conducting Outdoor Sound Measurements Using a Statistical Sound Analysis System
ASTM E1915-07 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
ASTM C1221-10(2018) Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
ASTM C1455-14e1 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
ASTM D5839-15 Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D5380-93(2003) Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
ASTM E1588-10e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM D5380-93(2021) Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
ASTM E2399-05 Standard Test Method for Maximum Media Density for Dead Load Analysis of Green Roof Systems
ASTM E23-96 Standard Test Method for Notched Bar Impact Testing of Metallic Materials
ASTM E2399/E2399M-19 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems
ASTM E23-12 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E23-12b Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E23-12a Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM C1605-04 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM C1605-04(2009) Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D5839-96 Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM C1350M-96 Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 10⁸ Pa - s to Approximately 10¹³ Pa - s) by Beam Bending (Metric)
ASTM D6052-97 Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2003) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2008) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM C1110-03(2008) Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
ASTM E1588-20 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM D8127-23 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
ASTM D6836-02(2008)e1 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
ASTM C1365-06 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
ASTM C1365-06(2011) Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
ASTM D8470-22 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems
ASTM D4106-96(2008) Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
ASTM E2399/E2399M-15 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems
ASTM D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
ASTM D4927-20 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM E1588-16 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM D8127-17 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants
ASTM D7511-09e2 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM D7511-12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
ASTM E1765-98 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
ASTM E2399-11 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegitative (Green) Roof Systems
ASTM D6836-02 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
ASTM D4927-10 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components8212;Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM D4927-15(2020) Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
ASTM F1372-93(2005) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D5850-18 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
ASTM F1372-93(2012) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D6299-10 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM E3309-21 Standard Guide for Reporting of Forensic Primer Gunshot Residue (pGSR) Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
ASTM C1365-18 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
ASTM D4105-96(2002) Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
ASTM D4105-96 Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
ASTM D4106-15 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
ASTM E1588-16a Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM E1588-17 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM D7343-18 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-12(2017) Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D5850-95(2000) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
ASTM D5850-95(2006) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
ASTM D5850-95(2012) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
ASTM F2944-12 Standard Test Method for Automated Colony Forming Unit (CFU) Assaysmdash;Image Acquisition and Analysis Method for Enumerating and Characterizing Cells and Colonies in Culture
ASTM D4106-96(2002) Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
ASTM C1110-88(1997)e1 Standard Practice for Sample Preparation for X-Ray Emission Spectrometric Analysis of Uranium in Ores Using the Glass Fusion or Pressed Powder Method
ASTM D4105/D4105M-15e1 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
ASTM B761-02e1 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
ASTM C1493-01 Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
ASTM E1646-95(2003) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
ASTM E1646-95 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
ASTM E1646-95(2011) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
ASTM C1365-98 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
ASTM C1365-98(2004) Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis

Professional Standard - Tobacco, analytical series standard curve method

YC/T 169.3-2002 Testing physical and chemical characteristics of tow for cigarette----Part 3: Crimp number
YC/T 169.4-2002 Testing physical and chemical characteristics of tow for cigarette----Part 4: Crimp index and percentage crimp recovery
YC/T 169.1-2002 Testing physical and chemical characteristics of tow for cigarette----Part 1: Total line density
YC/T 169.2-2002 Testing physical and chemical characteristics of tow for cigarette----Part 2: Linear density of filament

Korean Agency for Technology and Standards (KATS), analytical series standard curve method

KS D ISO 16592:2011 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 16592-2011(2016) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 16592-2011(2021) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method

British Standards Institution (BSI), analytical series standard curve method

BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
BS EN 3373-014:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard
BS 6200-4:1989 Sampling and analysis of iron, steel and other ferrous metals - Recommendations for the order of listing elements in the chemical analysis of steel
BS EN 3373-008:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C. Product standard
BS EN 61935-1:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 1: Installed cabling
BS EN 61935-1:2006 Testing of balanced communication cabling in accordance with standards series EN 50173: Installed cabling
BS EN 3373-007:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs. Product standard
BS EN 3708-003:2006 Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard
BS EN 3155-075:2009 Aerospace series - Electrical contacts used in elements of connection - Part 075:Contacts, electrical, quadrax, size 08, female, type E, crimp, class R. Product standard
BS EN 3708-004:2006 Aerospace series - Modular interconnection systems - Terminal junction systems - Part 004: Removable feedback modules version, unsealed - Product standard
20/30421256 DC BS EN 4641-401. Aerospace series. Cables, optical 125μm diameter cladding - Part 401. Tight structure Bend Insensitive 50-125 μm GI fibre nominal 1.8 mm Outside Diameter Product Standard
BS EN 61935-2:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 2: Patch cords and work area cords
BS EN 61935-2:2006 Testing of balanced communication cabling in accordance with standards series EN 50173. Patch cords and work area cords
BS EN 3155-074:2009 Aerospace series - Electrical contacts used in elements of connection - Part 074: Contacts, electrical, quadrax, size 8, male, type E, crimp, class R — Product standard
22/30461921 DC BS EN 4641-401. Aerospace series. Cables, optical 125 μm diameter cladding. - Part 401. Tight structure bend insensitive 50 µm/125 µm GI fibre nominal, 1,8 mm outside diameter. Product standard
BS EN 4165-012:2005 Connectors, electrical, rectangular, modular - Operating temperature 175 ℃ continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard
BS EN 3375-008:2009 Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid — Star Quad 100 ohms — Type KD — Product standard

International Organization for Standardization (ISO), analytical series standard curve method

ISO 16592:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 16592:2012 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO/DIS 22928-1 Rare earth — Analysis by wavelength dispersive x-ray fluorescence spectrometry (WD-XRFS) — Part 1: Determination of composition of rare earth magnet scraps using standardless XRF commercial packages

Association Francaise de Normalisation, analytical series standard curve method

NF X21-007:2008 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steel using a calibration curve method.
NF V03-110:2010 Analyse des produits agricoles et alimentaires - Protocole de caractérisation en vue de la validation d'une méthode d'analyse quantitative par construction du profil d'exactitude
NF EN 4056-002:2014 Série aérospatiale - Frettes de câblage pour harnais - Partie 002 : liste des normes de produit
NF L52-253-002*NF EN 4056-002:2014 Aerospace series - Cable ties for harnesses - Part 002 : index of product standards
NF EN 2267-010:2018 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 010 : famille DR, fil simple marquable au laser UV - Norme de produit
NF C93-587-2:2006 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 2 : patch cords and work area cords.
NF EN 2267-009:2017 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre -55 oC et 260 oC - Partie 009 : famille DRA, fil simple et éléments assemblés - Norme de produit
NF EN 2346-003:2006 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 003 : famille DL, fil simple - Norme de produit
NF L53-201-076:2012 Aerospace series - Electrical contacts used in elements of connection - Part 076 : contacts, electrical, male, type A, crimp, class R - Product standard.
XP A06-379-1999 Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry.
NF EN 4681-005:2019 Série aérospatiale - Câbles, électriques, d'usage général, avec conducteurs en aluminium ou en aluminium chemisé cuivre - Partie 005 : famille AZ, fil simple, pour emploi en basse pression - Norme de produit
NF EN 2267-012:2015 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 012 : famille DZ, fil simple marquable au laser UV pour emploi en basse pression - Norme de produit
NF EN 2267-007:2006 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55oC et 260oC - - Partie 007 : famille DMA, fil simple marquable au jet d'encre et éléments assemblés - Norme de produit
NF C93-587-1:2006 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 1 : installed cabling.
NF L53-202-002*NF EN 3373-002:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002 : general and list of product standard
NF EN 2346-005:2017 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 005 : famille DW, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produit
NF EN 2346-004:2006 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 004 : famille DN, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produit
NF EN 4681-006:2019 Série aérospatiale - Câbles, électriques, d'usage général, avec conducteurs en aluminium ou en aluminium chemisé cuivre - Partie 006 : famille AZA, fil simple et éléments assemblés, pour emploi en basse pression - Norme de produit
NF EN 61935-1:2010 Spécification relative aux essais de câblages symétriques et coaxiaux propres aux technologies de l'information - Partie 1 : câblages symétriques installés selon la série de normes EN 50173
NF EN 2267-008:2006 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 008 : famille DM, fil simple marquable au laser UV et éléments assemblés - Norme de produit
NF L53-202-010*NF EN 3373-010:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010 : terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150oC for metric and inch stud series - Product standard
NF L53-202-011*NF EN 3373-011:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011 : terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260oC for metric and inch stud series - Product standard
NF L54-132-002*NF EN 3716-002:2006 Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 002 : conditions of use and list of product standards
NF EN 4056-004:2015 Série aérospatiale - Frettes de câblage pour harnais - Partie 004 : frettes en plastique - Températures d'utilisation - 55 oC à 105 oC et - 55 oC à 150 oC - Norme de produit
NF EN 4056-006:2014 Série aérospatiale - Frettes de câblage pour harnais - Partie 006 : frettes en peek - Températures d'utilisation -55 oC à 240 oC - Norme de produit
NF EN 2267-011:2015 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55oC et 260oC - Partie 011 : famille DZA, fil simple et éléments assemblés pour emploi en basse pression - Norme de produit
NF L54-110-012*NF EN 4165-012:2006 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175oC continuous - Part 012 : flange mounting receptacle 2 and 4 modules, series 3 - Product Standard
NF L10-600-6*NF EN 2070-6:1990 Aerospace series. Aluminium and aluminium alloy wrought products. Technical specification. Part 6 : rivet wire.
NF EN 4049-003:2008 Série aérospatiale - Câbles, thermocouple - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 003 : fil simple nickel chrome/nickel aluminium - Norme de produit
NF L53-202-008*NF EN 3373-008:2013 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008 : copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 oC - Product standard
NF EN 3375-009:2016 Série aérospatiale - Câbles électriques pour transmission de données numériques - Partie 009 : simple tresse - Bus CAN - 120 ohms - Type WX - Norme de produit
NF C93-587-1*NF EN 61935-1:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 1 : installed balanced cabling as specified in the standards series EN 50173
NF L52-010-006*NF EN 6049-006:2013 Aerospace series - Electrical cables, installation - Protection sleeve in meta-aramid fibres - Part 006 : self-wrapping protective sleeve, flexible post installation - Product standard
NF EN 4165-012:2006 Série aérospatiale - Connecteurs électriques, rectangulaires, modulaires - Température d'utilisation 175oC continu - Partie 012 : embase à collerette 2 et 4 modules, série 3 - Norme de produit
NF EN 4165-011:2007 Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d'utilisation 175oC continu - Partie 011 : embase à collerette 2 et 4 modules, série 2 - Norme de produit
NF L54-132-004:2006 Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 004 : solder plug - Product standard.
NF L54-132-003*NF EN 3716-003:2006 Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 003 : solder receptacle - Product standard
NF L52-270-008*NF EN 3375-008:2009 Aerospace series - Cable, electrical, for digital data transmission - Part 008 : single braid - Star Quad 100 ohms - Type KD - Product standard
NF EN 3375-011:2022 Série aérospatiale - Câbles électriques pour transmission de données numériques - Partie 011 : simple tresse - Quarte en étoile 100 ohms - Allégée - Type KL - Norme de produit

AASHTO - American Association of State Highway and Transportation Officials, analytical series standard curve method

T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)

European Association of Aerospace Industries, analytical series standard curve method

AECMA PREN 3373-010-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 癈 for metric and inch stud series Product standard Edition
AECMA PREN 3373-011-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 癈 for metric and inch stud series Product standard Editi
AECMA PREN 3373-012-2003 Aerospace Series Terminal Lugs and In-line Splices for Crimping on Electric Conductors Part 012: In-line Splices, Insulated and Sealed, for Crimping on Copper Conductors, Temperature up to 150 Degrees C Product Standard Edition P 1
AECMA PREN 3373-013-2003 Aerospace Series Terminal Lugs and in-line Splices for Crimping on Electric Conductors Part 013: In-line Splices, Insulated and Moisture Resistant, for Crimping on Copper Conductors, temperature up to 260 degrees C Product Standard Edition P 1
AECMA PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire Issue P 1
AECMA PREN 3218-003-1990 Aerospace Series Connector, Rectangular, Metallic Shells, Screw-Locking Part 003 - Plug for Front-Removable Size 22 Crimp Contacts Product Standard
AECMA PREN 4008-007-1996 Aerospace Series Elements of Electrical and Optical Connection General Accessories and Tooling Part 007 - Positioner for Crimping Tool M22520/2-01 Electrical Contacts According to EN 3155-016 Product Standard
AECMA PREN 4008-008-1997 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 008: Positioner for Crimping Tool M22520/7-01 Product Standard Edition P 1
AECMA PREN 4008-011-2004 Aerospace series Elements of electrical and optical connection Crimping tools and associated accessories Part 011: Positioner for crimping tool M22520/2-01 Product standard Edition P 1
AECMA PREN 4008-012-2004 Aerospace series Elements of electrical and optical connection Crimping tools and associated accessories Part 012: Positioner for crimping tool M22520/2-01 Product standard Edition P 1
AECMA PREN 4008-013-2002 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 013: Positioner for Crimping Tool m22520/2-01 Product Standard Edition P1
AECMA PREN 4008-014-2002 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 014: Turret for Crimping Tool M22520/31-01 Product Standard Edition P1
AECMA PREN 4008-015-2005 Aerospace series Elements of electrical and optical connection Crimping tool and associated accessories Part 015: Positioner for crimping tool M22520/2-01 Product standard Edition P 1
AECMA PREN 4008-017-2005 Aerospace series Elements of electrical and optical connection Crimping tool and associated accessories Part 017: Head for crimping tool M22520/4-01 Product standard Edition P 1
AECMA PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys Edition P 1
AECMA PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis
AECMA PREN 3218-008-1995 Aerospace Series: Connectors, Rectangular, with Metallic Shells and Screw-Locking Part 008: Receptacle with Rear-Removable Size 20 Crimp Contacts Product Standard Edition P1
AECMA PREN 4008-006-1997 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 006: Positioner for Crimping Tool M22520/7 Product Standard Edition P 1
AECMA PREN 3218-007-1995 Aerospace Series Connectors, Rectangular, with Metallic Shells and Screw-Locking Part 007: Plug with Rear-Removable Size 20 Crimp Contracts Product Standard Edition P1
AECMA PREN 4008-007-1997 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 007: Positioner for Crimping Tool M22520/2-01 Product Standard Edition P 1
AECMA PREN 4008-008-1996 Aerospace Series Elements of Electrical and Optical Connection General Accessories and Tooling Positioner for Crimping Tool M22520/7-01 Electrical Contacts According to EN 3155-016 Part 008 - Product Standard
AECMA PREN 3373-002-2007 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 002: General and list of product standard Edition P 1
AECMA PREN 2003-15-1995 Aerospace Series Test Methods for Metallic Materials Ultrasonic Testing Part 15 : Reference Blocks Edition P1
AECMA PREN 3155-074-2008 Aerospace series Electrical contacts used in elements of connection Part 074: Contacts, electrical, quadrax, size 8, male, type E, crimp, class R Product standard Edition P1
AECMA PREN 4529-002-2001 Aerospace Series Elements of Electrical and Optical Connection Sealing Plugs Part 002: Index of Product Standards Edition P 1
AECMA PREN 4529-003-2001 Aerospace Series Elements of Electrical and Optical Connection Sealing Plugs Part 003: Class T - Product Standard Edition P 1
AECMA PREN 4165-013-2001 Aerospace Series Connectors, Electrical, Rectangular, Modular Operating Temperature 175 Degrees Celsius Continuous Part 013: Cable Clamp 2 or 4 Modules, for Connectors Series 2 and Series 3 Product Standard Edition 1E

The American Road & Transportation Builders Association, analytical series standard curve method

AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO T 286-1996 Standard Method of Test for Measurement of Vehicular Response to Traveled Surface Roughness HM-22; Part IIA; ASTM Designation E 1082-90(1995) R(2000)

Aerospace, Security and Defence Industries Association of Europe (ASD), analytical series standard curve method

ASD-STAN PREN 4056-002-2012 Aerospace series Cable ties for harnesses Part 002: Index of product standards (Edition P 2)
ASD-STAN PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)
ASD-STAN PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys (Edition P 1)
ASD-STAN PREN 2349-413-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 413: Vibration, Sinusoidal and Random (Edition P 1)
ASD-STAN PREN 2591-403-2010 Aerospace series Elements of electrical and optical connection Test methods Part 403: Sinusoidal and random vibration (Edition P 2)
ASD-STAN PREN 3684-1996 Aerospace Series Test Methods Titanium Alloy Wrought Products Determination of Beta Ray Transus Temperature Metallographic Method (Edition P 1)
ASD-STAN PREN 3567-003-1992 Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 003 - Single In-Line Couplers Product Standard (Edition P 1)
ASD-STAN PREN 3567-004-1992 Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 004 - Double In-Line Couplers Product Standard (Edition P 1)
ASD-STAN PREN 3567-001-1992 Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 001 - Technical Specification (Edition P 1)
ASD-STAN PREN 4056-004-2013 Aerospace series Cable ties for harnesses Part 004: Plastic cable ties For operating temperatures - 55 °C to 105 °C and - 55 °C to 150 °C Product standard (Edition P 1)
ASD-STAN PREN 3708-003-1996 Aerospace Series Modular Interconnection Systems Terminal Junction Systems Part 003 : Removable Feedback Modules Version, Sealed Product Standard (Edition P 2)
ASD-STAN PREN 3708-004-1996 Aerospace Series Modular Interconnection Systems Terminal Junction Systems Part 004 : Removable Feedback Modules Version, Unsealed Product Standard (Edition P 2)
ASD-STAN PREN 3373-010-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series Product standard (Edition
ASD-STAN PREN 3373-011-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series Product standard (Editi
ASD-STAN PREN 3660-002-2014 Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards (Edition P 3)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, analytical series standard curve method

PREN 4056-002-2012 Aerospace series Cable ties for harnesses Part 002: Index of product standards (Edition P 2)
PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)
PREN 3877-1993 Aerospace Series Test Method for Braze Alloys Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis
PREN 4056-002-2000 Aerospace Series Cable Ties for Harnesses Part 002: Index of Product Standards (Edition 4)
PREN 4056-002-2002 Aerospace Series Cable Ties for Harnesses Part 002: Index of Product Standards (Edition P 1)
PREN 4056-006-2012 Aerospace series Cable ties for harnesses Part 006: Peek cable ties For operating temperatures - 55 °C to 240 °C Product standard (Edition P 1)
PREN 3877-1997 Aerospace Series Metallic Materials Test Method Determination of Solidus and Liquidus Temperatures by Differential Thermal Analysis of Braze Alloys (Edition P 1)
PREN 4056-003-2018 Aerospace series Cable ties for harnesses Part 003: Plastic cable ties Operating temperatures – 65 °C to 105 °C and – 65 °C to 150 °C Product standard (Edition P 2)
PREN 4056-004-2013 Aerospace series Cable ties for harnesses Part 004: Plastic cable ties For operating temperatures - 55 °C to 105 °C and - 55 °C to 150 °C Product standard (Edition P 1)
PREN 3567-003-1992 Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 003 - Single In-Line Couplers Product Standard (Edition P 1)
PREN 3567-004-1992 Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 004 - Double In-Line Couplers Product Standard (Edition P 1)
PREN 3660-002-2014 Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 002: Index of product standards (Edition P 3)

ES-UNE, analytical series standard curve method

UNE-EN 4056-002:2014 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards (Endorsed by AENOR in September of 2014.)
UNE-EN 3373-002:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002: General and list of product standard (Endorsed by AENOR in April of 2009.)
UNE-EN 3567-001:2001 Aerospace series. In line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B. Part 001: Technical specification (Endorsed by AENOR in April of 2002.)
UNE-EN 61935-1:2009 Specification for the testing of balanced and coaxial information technology cabling -- Part 1: Installed balanced cabling as specified in the standards series EN 50173 (Endorsed by AENOR in April of 2010.)
UNE-EN 4056-006:2014 Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - For operating temperatures -55 °C to 240 °C - Product standard (Endorsed by AENOR in September of 2014.)
UNE-EN 3373-007:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard (Endorsed by AENOR in Apri...
UNE-EN 3373-008:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C - Product standard (Endorsed by AENOR in ...

CU-NC, analytical series standard curve method

NC 38-02-09-1988 Food Sanitary Standards System. Food Dyes. Qualitative Analysis Methods
NC 93-02-221-1986 Standards System for Environmental Protection. Atmosphere. Gravimetric Determination of Float Dust
NC 12-01-13-1988 Standards System for Protection Against Corrosión. Determination of Nitrates Content in the Atmosphere. Method of Chemical Analysis
NC 38-02-12-1988 Food Sanitary Standards. System. Quantitative Determination of Bacillus Cereus. Microbiological Analysis Method
NC 38-02-11-1988 Food Sanitary Standards System. Quantitative Determination of Clostridium Perfringes. Method of Microbiollogical Analysis
NC 38-02-10-1988 Food Sanitary Standards System. Qualitative Determination of Staphylococcus Aureus in Foods. Methods of Microbiological Analysis

European Committee for Standardization (CEN), analytical series standard curve method

EN 3373-008:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C - Product standard
EN 4056-002:2014 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards
EN 3155-071:2014 Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts@ electrical@ female@ type A@ crimp@ class S - Product standard
EN 3373-007:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard
EN 3155-080:2014 Aerospace series - Electrical contacts used in elements of connection - Part 080: Contacts size 22 for EN 2997@ electrical@ male@ type A@ crimp@ class T - Product standard
EN 3155-081:2014 Aerospace series - Electrical contacts used in elements of connection - Part 081: Contacts size 22 for EN 2997@ electrical@ female@ type A@ crimp@ class T - Product standard
EN 3375-009:2016 Aerospace series - Cable@ electrical@ for digital data transmission - Part 009: Single braid - CAN Bus - 120 Ohms - Type WX - Product standard
EN 4681-005:2015 Aerospace series - Cables@ electric@ general purpose@ with conductors in aluminium or copper-clad aluminium - Part 005: AZ family@ single@ for use in low pressure atmosphere - Product standard
EN 3567-004:2001 Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers; Product standard
EN 3218-007:2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 007: Plug with rear-removable size 20 crimp contacts - Product standard
EN 3218-008:2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 008: Receptacle with rear-removable size 20 crimp contacts - Product standard
EN 2794-004:2014 Aerospace series - Circuit breakers@ single-pole@ temperature compensated@ rated currents 20 A to 50 A - Part 004: UNC thread terminals - Product standard
EN 4165-012:2005 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product standard

CENELEC - European Committee for Electrotechnical Standardization, analytical series standard curve method

EN 61935-1:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 Part 1: Installed cabling
EN 61935-1:2009 Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in the standards series EN 50173

Standard Association of Australia （SAA）, analytical series standard curve method

AS ISO 15472:2006 Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, analytical series standard curve method

GB/T 30913-2014 Standard test method for classification of film systems for industrial radiography
GB/T 30701-2014 Surface chemical analysis.Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy

Canadian General Standards Board （CGSB), analytical series standard curve method

CGSB 4.2 NO. 39-2004-CAN/CGSB-2004 M磂thodes pour 磂preuves textiles Textiles Tissus Construction M磂thodes d抋nalyse Partie 3: D磂termination de l抏mbuvage d抲n fil dans un tissu

国家市场监督管理总局、中国国家标准化管理委员会, analytical series standard curve method

GB 38030.4-2019 Dimensions series of standard transport ship types passing the locks of inland rivers—Part 4：The “three lanes” of the Pearl River system
GB 38030.3-2019 Dimensions series of standard transport ship types passing the locks of inland rivers—Part 3：Xijiang main river

Danish Standards Foundation, analytical series standard curve method

DS/IEC 68-2-57:1990 International Electrotechnical Commission IEC Publication No. 68-2-57:1989 Environmental testing - Part 2: Tests - Test Ff: Vibration - Time-history method
DS/EN 61935-1:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in the standards series EN 50173
DS/EN 3660-002:2006 Aerospace series – Cable outlet accessories for circular and rectangular electrical and optical connectors – Part 002: Index of product standards
DS/EN 3567-003:2002 Aerospace series - In-line couplers for use in multiplex data systems in accordance with MIL-STD-1553B- Part 003: Single in-line couplers - Product standard
DS/EN 3373-002:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002: General and list of product standard
DS/EN 3373-011:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard
DS/EN 3375-008:2009 Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 ohms - Type KD - Product standard
DS/ISO 14404-4:2021 Calculation method of carbon dioxide emission intensity from iron and steel production – Part 4: Guidance for using the ISO 14404 series
DS/EN 3373-010:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series - Product standard

Society of Automotive Engineers (SAE), analytical series standard curve method

SAE J2271-2009 Ship Systems and Equipment Part Standard for Studs Continuous and Double End (Inch Series)

IN-BIS, analytical series standard curve method

IS 13742 Pt.2-1993 Carbide tipped single point tools. ISO series. Part 2: Cranked turning and facing tool (ISO 2). Specification

(U.S.) Telecommunications Industries Association , analytical series standard curve method

TIA TSB-171-2010 Terrestrial Land Mobile Radio-Antenna Systems-History and Technical Analysis of the Quarter Wave Monopole Over Finite Ground Plane as a Gain Standard

TIA - Telecommunications Industry Association, analytical series standard curve method

TSB-171-2010 Terrestrial Land Mobile Radio-Antenna Systems-History and Technical Analysis of the Quarter Wave Monopole Over Finite Ground Plane as a Gain Standard

Professional Standard - Machinery, analytical series standard curve method

JB/T 8425-1996 Standard test method of X-ray fluorescence spectrometric analysis of content of chromium, nickel, molybdenum and vanadium in iron base dusty spray
JB/T 5920.1-1991 Series dimension of installation flange and shaft extension of incurve (outward force) type low speed large torque hydraulic motors Part 1: 20-25MPa pivot rotating motors

未注明发布机构, analytical series standard curve method

DIN EN IEC 61158-1:2020 Industrial communication networks – Fieldbuses – Part 1: Overview and guidelines for the standards of the IEC 61158 and IEC 61784 series

Japanese Industrial Standards Committee (JISC), analytical series standard curve method

JIS K 0146:2002 Surface chemical analysis -- Sputter depth profiling -- Optimization using layered systems as reference materials

Shanghai Provincial Standard of the People's Republic of China, analytical series standard curve method

DB31/T 370.2-2006 Broadband Access Engineering Series Standards Part 2: Wireless Local Area Network Engineering Construction and Acceptance Test Specifications
DB31/T 370.4-2006 Broadband Access Engineering Series Standards Part 4: HFC-based CATV Broadband Access Network Engineering Acceptance Specifications
DB31/T 370.3-2006 Broadband Access Engineering Series Standards Part 3: Design and Construction Specifications for Cable TV Broadband Access Network Based on HFC

ZA-SANS, analytical series standard curve method

SANS 8466-2:2002 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics Part 2: Calibration strategy for non-linear second-order calibration functions
SANS 8466-1:2002 Water quality - Calibration and evaluation of analytical methods and estimation of performance characteristics Part 1: Statistical evaluation of the linear calibration function

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., analytical series standard curve method

ASHRAE 140-2004 Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs (Includes ANSI/ASHRAE addenda listed in Annex C)

CEN - European Committee for Standardization, analytical series standard curve method

EN 4681-005:2019 Aerospace series - Cables@ electric@ general purpose@ with conductors in aluminium or copper-clad aluminium - Part 005: AZ family@ single@ for use in low pressure atmosphere - Product standard
EN 3373-002:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002: General and list of product standard
EN 2794-004:1999 Aerospace Series - Circuit Breakers@ Single-Pole@ Temperature Compensated@ Rated Currents 20 A to 50 A - Part 004: UNC Thread Terminals - Product Standard

American Society of Mechanical Engineers (ASME), analytical series standard curve method

ASME SEC V B SE-1815-2002 Standard Test Method for Classification of Film Systems for Industrial Radiography ASTM E1815-96; DELETED

Institute of Electrical and Electronics Engineers (IEEE), analytical series standard curve method

IEEE/ANSI 802.4-1990 IEEE Standard for Information processing systems -- Local area networks --Part 4: Standard for Token-Passing Bus Access Method and Physical Layer Specifications
ANSI/IEEE Std 802.4-1990 IEEE Standard for Information processing systems -- Local area networks --Part 4: Standard for Token-Passing Bus Access Method and Physical Layer Specifications
IEEE Std 101A-1974 IEEE Simplified Method for Calculation of the Regression Line (Appendix to IEEE Guide for the Statistical Analysis of Thermal Life Test Data, IEEE Std 101-1972)
IEEE 101A-1974 IEEE Simplified Method for Calculation of the Regression Line (Appendix to IEEE Guide for the Statistical Analysis of Thermal Life Test Data, IEEE Std 101-1972)
IEEE Std 802.6h-1993 IEEE Standard for Local and Metropolitan Area Networks: Supplements to Distributed Queue Dual Bus (DQDB) Access Method and Physical Layer Specifications Isochronous Service on a Distributed Queue Dual Bus (DQDB) Subnetwork of a Metropolitan Area Network
IEEE Std 802.6j-1995 IEEE Standards for Local and Metropolitan Area Networks: Supplement to Distributed Queue Dual Bus (DQDB) Access Method and Physical Layer Specifications. Connection-Oriented Service on a Distributed Queue Dual Bus (DQDB) Subnetwork of a Metropolitan Area

Lithuanian Standards Office , analytical series standard curve method

LST EN 3660-002-2007 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 002: Index of product standards
LST EN 3373-002-2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002: General and list of product standard
LST EN 3373-011-2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard
LST EN 3375-008-2009 Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 ohms - Type KD - Product standard
LST EN 3373-010-2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series - Product standard

American National Standards Institute （ANSI), analytical series standard curve method

BS EN IEC 61784-1-3:2023 Industrial networks. Profiles Part 1-3. Fieldbus profiles. Communication Profile Family 3 (British Standard)
BS EN IEC 61784-1-8:2023 Industrial networks - Profiles Part 1-8: Fieldbus profiles - Communication Profile Family 8 (British Standard)

RU-GOST R, analytical series standard curve method

GOST R ISO 2859-10-2008 Statistical methods. Sampling procedures for inspection by attributes. Part 10. Introduction to the GOST R ISO 2859 series of standards

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, analytical series standard curve method

ITU-T P.562-2000 Analysis and Interpretation of INMD Voice-Service Measurements Series P: Telephone Transmission Quality@ Telephone Installations@ Local Line Networks Objective Measuring Apparatus (Study Group 12)

BELST, analytical series standard curve method

STB 11.05.03-2010 System of fire safety standards.Fire safety of technological processes. Methods of tests and analyzes fire hazard. General requirements