ZH
RU
ES

serial standard curve method

serial standard curve method, Total:454 items.

In the international standard classification, serial standard curve method involves: Testing of metals, Sports equipment and facilities, Aerospace electric equipment and systems, Waxes, bituminous materials and other petroleum products, Non-ferrous metals, Paints and varnishes, Aerospace fluid systems and components, Pipeline components and pipelines, Products of the textile industry, Raw materials for rubber and plastics, Electrical wires and cables, Beverages, Iron and steel products, Measurement of volume, mass, density, viscosity, Aircraft and space vehicles in general, Petroleum products in general, Plastics, Springs, Electrical accessories, Construction materials, Fruits. Vegetables, Optics and optical measurements, Products of non-ferrous metals, Structures of buildings, Road vehicles in general, Road engineering, Refractories, Rubber and plastics products, Fasteners for aerospace construction, Photography, Insulating materials, Hydraulic fluids, Shipbuilding and marine structures in general, Sterilization and disinfection, Magnetic materials, Linear and angular measurements, Components and accessories for telecommunications equipment, Applications of information technology, Passenger and cabin equipment, Non-destructive testing, Fasteners, Analytical chemistry, Welding, brazing and soldering, Manufacturing forming processes, Vocabularies, Coatings and related processes used in aerospace industry, Industrial automation systems, Telecommunication systems, Open systems interconnection (OSI), On-board equipment and instruments, Fluid power systems, Radiocommunications, Networking, Ceramics, Materials for aerospace construction, Soil quality. Pedology, Lubricants, industrial oils and related products, Quality.

AASHTO - American Association of State Highway and Transportation Officials, serial standard curve method

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)
T272-1986 Standard Method of Test for Family of Curves - One-Point Method (Nineteenth Edition; Revised Per Interim Specifications - Tests and Methods - 1999)
T 333-2007 Standard Method of Test for Linear Coefficient of Shrinkage on Cure of Adhesive Systems
TP 107-2018 Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test
PP 96-2018 Proposed Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Indirect Tension Testing Method
TP 107-2014 Standard Method of Test for Determining the Damage Characteristic Curve of Asphalt Mixtures from Direct Tension Cyclic Fatigue Tests

American Society for Testing and Materials (ASTM), serial standard curve method

ASTM E561-21 Standard Test Method for KR Curve Determination
ASTM E561-20 Standard Test Method for KR Curve Determination
ASTM E561-19 Standard Test Method for KR Curve Determination
ASTM E561-19e1 Standard Test Method for KR Curve Determination
ASTM E561-22 Standard Test Method for KR Curve Determination
ASTM E561-08e1 Standard Test Method forK-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method forK-R Curve Determination
ASTM E561-15a Standard Test Method for KR Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method forK-R Curve Determination
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM B230/B230M-07 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
ASTM B230/B230M-07(2012) Standard Specification for Aluminum 1350ndash;H19 Wire for Electrical Purposes
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM E561-23 Standard Test Method for KR Curve Determination
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM E1541-98 Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM D3883-99 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D3883-04(2008) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D3883-04(2012) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D3627-96 Standard Test Method for Color of Cresylic Acids ("C" Series Standards)
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM B389-81(1998) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM B389-81(2020) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM B236M-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
ASTM D3412-01 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D3412-95 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D3412/D3412M-13(2020) Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E1082-90(2002) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C16-03(2008) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C1699-09(2023) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM C1699-08 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM D4882-97 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM F2771-10 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D6549-01 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-00 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D6549-06(2015) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM F2799-09 Standard Practice for Maintenance of Airplane Electrical Wiring Systems
ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D6549-06(2011) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7646-10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM B609/B609M-99 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM B800-05 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
ASTM B800-05(2011) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical PurposesAnnealed and Intermediate Tempers
ASTM D6482-99 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM E578-83(1998) Standard Test Method for Linearity of Fluorescence Measuring Systems
ASTM E578-07(2021) Standard Test Method for Linearity of Fluorescence Measuring Systems
ASTM E1891-21 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D6549-06 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM A977/A977M-07(2013) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM B800-00 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
ASTM B801-07(2012) Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM B800-05(2021) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
ASTM B913-00e1 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM B913-00 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM D6482-06 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-23 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM C1350M-96 Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 10⁸ Pa - s to Approximately 10¹³ Pa - s) by Beam Bending (Metric)
ASTM E578-07 Standard Test Method for Linearity of Fluorescence Measuring Systems
ASTM D3108-07 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM E578-01 Standard Test Method for Linearity of Fluorescence Measuring Systems
ASTM E578-07(2013) Standard Test Method for Linearity of Fluorescence Measuring Systems
ASTM D3108/D3108M-13 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM E1891-10a Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM A977-97 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM G75-07 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM B801-99 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM D6482-01 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D6482-06(2011) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM D7646-10(2019) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM D6482-06(2016) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)
ASTM E1891-97(2002) Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1891-97 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1891-10 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM A773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A773/A773M-96 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A773/A773M-21 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM A773/A773M-14 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM D3108-01 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM D3108-95 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM E1815-96 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1815-96(2001) Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM D3108/D3108M-13(2020) Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM E1815-18 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM D310-88 Standard test method for coefficient of friction between yarn and solid materials
ASTM B801-18(2023) Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM E2310-04(2015) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
ASTM E1815-18(2023) Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM B801-07 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM F390-98 Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
ASTM G75-01 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM G75-95 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM E2310-04 Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-infrared Spectroscopy
ASTM A773/A773M-01(2009) Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM E1815-06 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM E1815-08(2013)e1 Standard Test Method for Classification of Film Systems for Industrial Radiography
ASTM G34-01(2018) Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G34-01(2018)e1 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G34-01(2008)e1 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM B913-05 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM B913-05(2010) Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
ASTM E2177-19 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
ASTM E2177-18 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
ASTM E2177-01(2009) Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (R_L) of Pavement Markings in a Standard Condition of Wetness
ASTM E1891-10a(2015) Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM G66-99(2013) Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
ASTM D2008-91(1996)e1 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2008-91(2001) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM F1764-97 Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
ASTM F1764-97(2002) Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
ASTM F1764-97(2007) Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
ASTM D2008-85 Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2008-91(2006) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM D2008-12 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM F1764-97(2012) Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
ASTM D2008-09 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
ASTM C1465-08(2013) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
ASTM C1465-08(2013)e1 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
ASTM G34-01(2013) Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM D6836-02(2008)e1 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
ASTM D6836-16 Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
ASTM C1465-00(2006) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
ASTM C1465-00 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
ASTM C1465-08 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
ASTM G66-99(2018) Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
ASTM D8111-22a Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
ASTM D8111-22 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
ASTM R0071 Standard Method of Test for Exfoliation Corrosion Susceptibility in 7XXX Series Copper-Containing Aluminum Alloys (Exco Test) (This is not an approved ASTM standard; available as PDF, only)
ASTM D7894/D7894M-14(2018) Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems
ASTM E1695-95(2006)e1 Standard Test Method for Measurement of Computed Tomography (CT) System Performance
ASTM D7894/D7894M-19 Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems
ASTM E2177-20 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings using the Bucket Method in a Condition of Wet Recovery
ASTM C1368-00 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature

The American Road & Transportation Builders Association, serial standard curve method

AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO T 333-2007 Standard Method of Test for Linear Coefficient of Shrinkage on Cure of Adhesive Systems
AASHTO TP 107-2014 Standard Method of Test for Determining the Damage Characteristic Curve of Asphalt Mixtures from Direct Tension Cyclic Fatigue Tests
AASHTO T 286-1996 Standard Method of Test for Measurement of Vehicular Response to Traveled Surface Roughness HM-22; Part IIA; ASTM Designation E 1082-90(1995) R(2000)
AASHTO TP 133-2021 Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test

European Association of Aerospace Industries, serial standard curve method

AECMA PREN 3658-1990 Aerospace Series Tube Bend Radii Design Standard Edition 1
AECMA PREN 3373-010-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 癈 for metric and inch stud series Product standard Edition
AECMA PREN 3373-011-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 癈 for metric and inch stud series Product standard Editi
AECMA PREN 6019-1990 Aerospace Series Test Methods for Metallic Materials Recommended Practice for R-Curve and Kco Determination Issue P 1
AECMA PREN 3373-012-2003 Aerospace Series Terminal Lugs and In-line Splices for Crimping on Electric Conductors Part 012: In-line Splices, Insulated and Sealed, for Crimping on Copper Conductors, Temperature up to 150 Degrees C Product Standard Edition P 1
AECMA PREN 3373-013-2003 Aerospace Series Terminal Lugs and in-line Splices for Crimping on Electric Conductors Part 013: In-line Splices, Insulated and Moisture Resistant, for Crimping on Copper Conductors, temperature up to 260 degrees C Product Standard Edition P 1
AECMA PREN 3218-003-1990 Aerospace Series Connector, Rectangular, Metallic Shells, Screw-Locking Part 003 - Plug for Front-Removable Size 22 Crimp Contacts Product Standard
AECMA PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire Issue P 1
AECMA PREN 3112-1987 Screws, Hexagonal Normal Head, Fully Threaded in Steel, Cadmium Plated Classification 900 MPa/235 Degrees Celsius
AECMA PREN 3112-1994 Aerospace Series Bolts, Normal Hexagonal Head, Threaded to Head, in Alloy Steel, Cadmium Plated Classification: 900 MPa (at Ambient Temperature)/235 Degrees C Edition P 2
AECMA PREN 3113-1999 Aerospace Series Screws, Hexagonal Normal Head, Fully Threaded, in Titanium Alloy Anodized Classification: 900 MPa/315 Degrees C Edition P 2; Withdrawn - Not Replaced
AECMA PREN 4651-2008 Aerospace series Copper-clad aluminium alloy conductors for electrical cables Product standard Edition P 1
AECMA PREN 3113-1987 Aerospace Series Screws, Hexagonal Normal Head, Fully Threaded in Titanium Alloy Anodized Classification: 900 MPa/315 Degrees Celsius Issue P 1
AECMA PREN 4008-007-1996 Aerospace Series Elements of Electrical and Optical Connection General Accessories and Tooling Part 007 - Positioner for Crimping Tool M22520/2-01 Electrical Contacts According to EN 3155-016 Product Standard
AECMA PREN 4261-1996 Aerospace Series Metallic Materials Rules for Drafting and Presentation of Test Method Standards Edition P 1
AECMA PREN 4008-008-1997 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 008: Positioner for Crimping Tool M22520/7-01 Product Standard Edition P 1
AECMA PREN 4008-011-2004 Aerospace series Elements of electrical and optical connection Crimping tools and associated accessories Part 011: Positioner for crimping tool M22520/2-01 Product standard Edition P 1
AECMA PREN 4008-012-2004 Aerospace series Elements of electrical and optical connection Crimping tools and associated accessories Part 012: Positioner for crimping tool M22520/2-01 Product standard Edition P 1
AECMA PREN 4008-013-2002 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 013: Positioner for Crimping Tool m22520/2-01 Product Standard Edition P1
AECMA PREN 4008-014-2002 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 014: Turret for Crimping Tool M22520/31-01 Product Standard Edition P1
AECMA PREN 4008-015-2005 Aerospace series Elements of electrical and optical connection Crimping tool and associated accessories Part 015: Positioner for crimping tool M22520/2-01 Product standard Edition P 1
AECMA PREN 4008-017-2005 Aerospace series Elements of electrical and optical connection Crimping tool and associated accessories Part 017: Head for crimping tool M22520/4-01 Product standard Edition P 1
AECMA PREN 3218-008-1995 Aerospace Series: Connectors, Rectangular, with Metallic Shells and Screw-Locking Part 008: Receptacle with Rear-Removable Size 20 Crimp Contacts Product Standard Edition P1
AECMA PREN 4008-006-1997 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 006: Positioner for Crimping Tool M22520/7 Product Standard Edition P 1
AECMA PREN 4618-2004 Aerospace series Aircraft internal air quality standards, criteria and determination methods Edition P 1
AECMA TR 4386-2001 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Test Method Standards Edition P 1
AECMA PREN 3218-007-1995 Aerospace Series Connectors, Rectangular, with Metallic Shells and Screw-Locking Part 007: Plug with Rear-Removable Size 20 Crimp Contracts Product Standard Edition P1
AECMA PREN 4008-007-1997 Aerospace Series Elements of Electrical and Optical Connection Crimping Tools and Associated Accessories Part 007: Positioner for Crimping Tool M22520/2-01 Product Standard Edition P 1
AECMA PREN 4008-008-1996 Aerospace Series Elements of Electrical and Optical Connection General Accessories and Tooling Positioner for Crimping Tool M22520/7-01 Electrical Contacts According to EN 3155-016 Part 008 - Product Standard
AECMA PREN 3373-002-2007 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 002: General and list of product standard Edition P 1
AECMA PREN 4386-1998 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Test Method Standards Edition P 1

ITE - Institute of Transportation Engineers, serial standard curve method

PD-O01- Introduction to ITS Standards Online Series

British Standards Institution (BSI), serial standard curve method

BS EN 3373-014:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard
BS EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard
BS EN 4056-002:2014 Aerospace series. Cable ties for harnesses. Index of product standards
BS EN 3373-008:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C. Product standard
19/30389262 DC BS EN 7110. Aerospace series. Bolt, 12 point flange head, metric series. Product standard
BS EN 3373-007:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs. Product standard
BS EN 61935-1:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 1: Installed cabling
BS EN 61935-1:2006 Testing of balanced communication cabling in accordance with standards series EN 50173: Installed cabling
BS EN 61158-1:2014 Industrial communication networks. Fieldbus specifications. Overview and guidance for the IEC 61158 and IEC 61784 series
BS EN 3375-009:2009 Aerospace series - Cable, electrical, for digital data transmission - Single braid - CAN Bus - 120 Ohms - Type WX - Product standard
BS EN 3375-009:2016 Aerospace series. Cable, electrical, for digital data transmission. Single braid. CAN Bus. 120 ohms. Type WX. Product standard
BS EN 4618:2009 Aerospace series. Aircraft internal air quality standards, criteria and determination methods
BS EN 4723:2015 Aerospace series. Standardized measurement methods for comfort and living space criteria for aircraft passenger seat
BS EN 4681-005:2015 Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. AZ family, single, for use in low pressure atmosphere. Product standard
BS EN 3708-003:2006 Aerospace series - Modular interconnection systems - Terminal junction systems - Part 003: Removable feedback modules version, sealed - Product standard
BS EN 4261:2022 Aerospace series. Metallic materials. Rules for drafting and presentation of test method standards
BS EN 3155-075:2009 Aerospace series - Electrical contacts used in elements of connection - Part 075:Contacts, electrical, quadrax, size 08, female, type E, crimp, class R. Product standard
BS EN 3708-004:2006 Aerospace series - Modular interconnection systems - Terminal junction systems - Part 004: Removable feedback modules version, unsealed - Product standard
20/30421256 DC BS EN 4641-401. Aerospace series. Cables, optical 125μm diameter cladding - Part 401. Tight structure Bend Insensitive 50-125 μm GI fibre nominal 1.8 mm Outside Diameter Product Standard
BS EN 3862:2013 Aerospace series. Non-metallic materials. Glass transparencies. Material standard. Chemically tempered soda lime float glass
BS EN 3155-074:2009 Aerospace series - Electrical contacts used in elements of connection - Part 074: Contacts, electrical, quadrax, size 8, male, type E, crimp, class R — Product standard
22/30461921 DC BS EN 4641-401. Aerospace series. Cables, optical 125 μm diameter cladding. - Part 401. Tight structure bend insensitive 50 µm/125 µm GI fibre nominal, 1,8 mm outside diameter. Product standard
BS EN 61935-2:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 2: Patch cords and work area cords
BS EN 61935-2:2006 Testing of balanced communication cabling in accordance with standards series EN 50173. Patch cords and work area cords

Professional Standard - Tobacco, serial standard curve method

YC/T 169.3-2002 Testing physical and chemical characteristics of tow for cigarette----Part 3: Crimp number
YC/T 169.4-2002 Testing physical and chemical characteristics of tow for cigarette----Part 4: Crimp index and percentage crimp recovery
YC/T 169.1-2002 Testing physical and chemical characteristics of tow for cigarette----Part 1: Total line density
YC/T 169.2-2002 Testing physical and chemical characteristics of tow for cigarette----Part 2: Linear density of filament

European Committee for Standardization (CEN), serial standard curve method

EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard
EN 3373-008:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C - Product standard
EN 4651:2014 Aerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard
EN 3373-007:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard
EN 4056-002:2014 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards
EN 3155-026:2010 Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product standard
EN 3155-071:2014 Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts@ electrical@ female@ type A@ crimp@ class S - Product standard
EN 3044:1998 Aerospace series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard
EN 4723:2015 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats
EN 4620:2010 Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys - Design standard
EN 4618:2009 Aerospace series - Aircraft internal air quality standards, criteria and determination methods
EN 3149:1996 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard
EN 4199-005:2009 Aerospace series - Bonding straps for aircraft - Part 005: Flat braid conductors copper, tin plated -65 Degrees C up to 150 Degrees C and copper, nickel plated, -65 Degrees C up to 260 Degrees C - Product standard
EN 3155-080:2014 Aerospace series - Electrical contacts used in elements of connection - Part 080: Contacts size 22 for EN 2997@ electrical@ male@ type A@ crimp@ class T - Product standard
EN 3155-081:2014 Aerospace series - Electrical contacts used in elements of connection - Part 081: Contacts size 22 for EN 2997@ electrical@ female@ type A@ crimp@ class T - Product standard
EN 3375-009:2016 Aerospace series - Cable@ electrical@ for digital data transmission - Part 009: Single braid - CAN Bus - 120 Ohms - Type WX - Product standard
EN 4681-005:2015 Aerospace series - Cables@ electric@ general purpose@ with conductors in aluminium or copper-clad aluminium - Part 005: AZ family@ single@ for use in low pressure atmosphere - Product standard
EN 3567-004:2001 Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 004: Double in-line couplers; Product standard

Association Francaise de Normalisation, serial standard curve method

NF L43-112*NF EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard.
NF EN 3658:2008 Série aérospatiale - Rayon de cintrage des tubes, pour applications moteurs - Norme de conception
NF EN 4056-002:2014 Série aérospatiale - Frettes de câblage pour harnais - Partie 002 : liste des normes de produit
NF L52-253-002*NF EN 4056-002:2014 Aerospace series - Cable ties for harnesses - Part 002 : index of product standards
NF EN 2267-010:2018 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 010 : famille DR, fil simple marquable au laser UV - Norme de produit
NF C93-587-2:2006 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 2 : patch cords and work area cords.
NF EN 2267-009:2017 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre -55 oC et 260 oC - Partie 009 : famille DRA, fil simple et éléments assemblés - Norme de produit
NF EN 2346-003:2006 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 003 : famille DL, fil simple - Norme de produit
NF L67-001:2010 Aerospace series - Aircraft internal air quality standards, criteria and determination methods.
NF L53-201-076:2012 Aerospace series - Electrical contacts used in elements of connection - Part 076 : contacts, electrical, male, type A, crimp, class R - Product standard.
NF EN 2267-012:2015 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 012 : famille DZ, fil simple marquable au laser UV pour emploi en basse pression - Norme de produit
NF EN 2267-007:2006 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55oC et 260oC - - Partie 007 : famille DMA, fil simple marquable au jet d'encre et éléments assemblés - Norme de produit
NF EN 4681-005:2019 Série aérospatiale - Câbles, électriques, d'usage général, avec conducteurs en aluminium ou en aluminium chemisé cuivre - Partie 005 : famille AZ, fil simple, pour emploi en basse pression - Norme de produit
NF L20-030*NF EN 3149:1996 Aerospace series. Shank nuts. Installation holes, 60 degrees swage, flanges. Design standard.
NF L36-221*NF EN 2569:1991 Aerospace series. Control cable fittings and turnbarrels. Technical specification.
NF EN 2346-005:2017 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 005 : famille DW, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produit
NF EN 2346-004:2006 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 004 : famille DN, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produit
NF L61-023*NF EN 4723:2016 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats
NF L53-202-002*NF EN 3373-002:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002 : general and list of product standard
XP L10-090*XP PR EN 4261:1998 Aerospace series. Metallic materials. Rules for drafting and presentation of test method standards.
NF EN 3149:1996 Série aérospatiale - Écrous à sertir - Trous d'installation, sertissage 60 degrés, brides - Norme de conception.
NF C93-587-1:2006 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 1 : installed cabling.
NF EN 4681-006:2019 Série aérospatiale - Câbles, électriques, d'usage général, avec conducteurs en aluminium ou en aluminium chemisé cuivre - Partie 006 : famille AZA, fil simple et éléments assemblés, pour emploi en basse pression - Norme de produit
NF L10-014*NF EN 4261:2022 Aerospace series - Metallic materials - Rules for drafting and presentation of test method standards
NF EN 4261:2022 Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de méthodes d'essais
NF L53-202-010*NF EN 3373-010:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 010 : terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150oC for metric and inch stud series - Product standard
NF L53-202-011*NF EN 3373-011:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011 : terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260oC for metric and inch stud series - Product standard
NF EN 2267-008:2006 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 008 : famille DM, fil simple marquable au laser UV et éléments assemblés - Norme de produit
XP PR EN 4261:1998 Série aérospatiale - Matériaux métalliques. Règles pour la rédaction et la présentation des normes de méthodes d'essai
NF EN 61935-1:2010 Spécification relative aux essais de câblages symétriques et coaxiaux propres aux technologies de l'information - Partie 1 : câblages symétriques installés selon la série de normes EN 50173
NF L54-110-012*NF EN 4165-012:2006 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175oC continuous - Part 012 : flange mounting receptacle 2 and 4 modules, series 3 - Product Standard
NF L54-132-002*NF EN 3716-002:2006 Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 002 : conditions of use and list of product standards
NF EN 4056-004:2015 Série aérospatiale - Frettes de câblage pour harnais - Partie 004 : frettes en plastique - Températures d'utilisation - 55 oC à 105 oC et - 55 oC à 150 oC - Norme de produit
NF EN 2267-011:2015 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55oC et 260oC - Partie 011 : famille DZA, fil simple et éléments assemblés pour emploi en basse pression - Norme de produit
NF EN 4056-006:2014 Série aérospatiale - Frettes de câblage pour harnais - Partie 006 : frettes en peek - Températures d'utilisation -55 oC à 240 oC - Norme de produit
NF L53-202-008*NF EN 3373-008:2013 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008 : copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 oC - Product standard
NF EN 4705:2020 Série aérospatiale - Méthodes de mesure du comportement lié à la durée de vie des systèmes d'éclairage dans un environnement normalisé destiné aux aéronefs
NF L10-600-6*NF EN 2070-6:1990 Aerospace series. Aluminium and aluminium alloy wrought products. Technical specification. Part 6 : rivet wire.
NF EN 4049-003:2008 Série aérospatiale - Câbles, thermocouple - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 003 : fil simple nickel chrome/nickel aluminium - Norme de produit

German Institute for Standardization, serial standard curve method

DIN EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard; German and English version EN 3658:2008
DIN EN 3658:2008-12 Aerospace series - Tube bend radii, for engine application - Design standard; German and English version EN 3658:2008
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN VDE 0472 Bb.1:2005 Testing of cables, wires and flexible cords - List of the standards series DIN VDE 0472 (VDE 0472)
DIN EN 4617:2008-02 Aerospace series - Recommended practices for standardising company standards; German and English version EN 4617:2006
DIN EN 4056-002:2014-10 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards; German and English version EN 4056-002:2014
DIN EN 3044:1998-07 Aerospance series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard; German version EN 3044:1998
DIN 6867-3:2000 Sensitometry of screen-film systems for medical radiography - Part 3: Method for determination of sensitometric curve shape, speed and average gradient for mammography
DIN 6867-3:2013 Sensitometry of screen/film systems for medical radiography.Part 3: Method for determination of sensitometric curve shape, speed and average gradient for mammography
DIN EN 3044:1998 Aerospance series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard; German version EN 3044:1998
DIN EN 3155-015:2007 Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-015:2006
DIN-Fachbericht 137:2004
DIN VDE 0207 Bb.1:2005 Insulating and sheathing compounds for cables and flexible cords - List of the standards of the series DIN VDE 0207 (VDE 0207)
DIN EN 4723:2015 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats; German and English version EN 4723:2015
DIN EN 4723:2015-12 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats; German and English version EN 4723:2015
DIN EN 3149:1996-10 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard; German version EN 3149:1996
DIN EN 4641-401:2022-12 Aerospace series - Cables, optical 125 ?m diameter cladding - Part 401: Tight structure bend insensitive 50 µm/125 µm GI fibre nominal, 1,8 mm outside diameter Product standard; German and English version prEN 4641-401:2022 / Note: Date of issue 2...
DIN EN 3149:1996 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard; German version EN 3149:1996
DIN EN 4261:2022-07 Aerospace series - Metallic materials - Rules for drafting and presentation of test method standards; German and English version EN 4261:2022
DIN EN 4261:2022 Aerospace series - Metallic materials - Rules for drafting and presentation of test method standards; German and English version EN 4261:2022
DIN EN 3662-006:2008 Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus-bar version - Product standard; German and English version EN 3662-006:2006
DIN EN 4056-006:2014-10 Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - For operating temperatures -55 °C to 240 °C - Product standard; German and English version EN 4056-006:2014 / Note: Applies in conjunction with DIN EN 4056-001 (2008-02).
DIN EN 3373-008:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C - Product standard; German and English versio
DIN EN 3373-007:2012-06 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard; German and English versio...

Group Standards of the People's Republic of China, serial standard curve method

T/GZRHJX 005-2019 Technical specification for thereference materials preparation of Daqu Jiang-xiang Baijiu series in Renhuai production region

ES-UNE, serial standard curve method

UNE-EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard (Endorsed by AENOR in May of 2008.)
UNE-EN 4617:2006 Aerospace series - Recommended practices for standardising company standards (Endorsed by AENOR in July of 2006.)
UNE-EN 4056-002:2014 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards (Endorsed by AENOR in September of 2014.)
UNE-EN 3373-002:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002: General and list of product standard (Endorsed by AENOR in April of 2009.)
UNE-EN 4723:2015 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats (Endorsed by AENOR in October of 2015.)
UNE-EN 3567-001:2001 Aerospace series. In line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B. Part 001: Technical specification (Endorsed by AENOR in April of 2002.)
UNE-EN 4261:2022 Aerospace series - Metallic materials - Rules for drafting and presentation of test method standards (Endorsed by Asociación Española de Normalización in June of 2022.)
UNE-EN 61935-1:2009 Specification for the testing of balanced and coaxial information technology cabling -- Part 1: Installed balanced cabling as specified in the standards series EN 50173 (Endorsed by AENOR in April of 2010.)
UNE-EN 4056-006:2014 Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - For operating temperatures -55 °C to 240 °C - Product standard (Endorsed by AENOR in September of 2014.)
UNE-EN 6093:2023 Aerospace series - Receptacle, floating, single lug (Endorsed by Asociación Española de Normalización in October of 2023.)
UNE-EN 3373-007:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard (Endorsed by AENOR in Apri...

RO-ASRO, serial standard curve method

STAS 6901-1978 Psycho-physiological acou stics STANDARD CURVES OF EQUAL LOUDNESS LEVEL AND RELATIONS BETWEEN SOUND PRESSURE LEVELS

CN-STDBOOK, serial standard curve method

图书 3-9533 Standardization methods for standardization of vocational education series textbooks
图书 3-9257 Guidelines for the Implementation of Series Standards for Test Methods of Toxins and Organic Pollutants in Food

VE-FONDONORMA, serial standard curve method

COVENIN 636-1974

Danish Standards Foundation, serial standard curve method

DS/EN 4617:2006 Aerospace series - Recommended practices for standardising company standards
DS/IEC 68-2-57:1990 International Electrotechnical Commission IEC Publication No. 68-2-57:1989 Environmental testing - Part 2: Tests - Test Ff: Vibration - Time-history method
DS/EN 4618:2009 Aerospace series - Aircraft internal air quality standards, criteria and determination methods
DS/EN 3149:1997 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard
DS/EN 61935-1:2010 Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in the standards series EN 50173
DS/EN 3660-002:2006 Aerospace series – Cable outlet accessories for circular and rectangular electrical and optical connectors – Part 002: Index of product standards
DS/EN 3567-003:2002 Aerospace series - In-line couplers for use in multiplex data systems in accordance with MIL-STD-1553B- Part 003: Single in-line couplers - Product standard
DS/EN 3373-011:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard

Lithuanian Standards Office , serial standard curve method

LST EN 4617-2006 Aerospace series - Recommended practices for standardising company standards
LST EN 4618-2010 Aerospace series - Aircraft internal air quality standards, criteria and determination methods
LST EN 3149-2001 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard
LST EN 3373-011-2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series - Product standard

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, serial standard curve method

PREN 6019-1990 Aerospace Series Test Methods for Metallic Materials Recommended Practice for R-Curve and Kco Determination (Issue P 1)
PREN 3658-1992 Aerospace Series Tube Bend Radii@ for Engine Application Design Standard (Issue P 1)
PREN 4617-2004 Aerospace series Recommended practices for standardising company standards (Edition P 1)
PREN 4056-002-2012 Aerospace series Cable ties for harnesses Part 002: Index of product standards (Edition P 2)
PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)
TR 4815-2015 Aerospace series Flange couplings@ up to 21 000 kPa Design standard Inch series (Edition 1)
PREN 4618-2004 Aerospace series Aircraft internal air quality standards@ criteria and determination methods (Edition P 1)
TR 4666-2016 Aerospace series Aircraft integrated air quality and pressure standards@ criteria and determination methods (Edition 1)
PREN 4056-002-2000 Aerospace Series Cable Ties for Harnesses Part 002: Index of Product Standards (Edition 4)
PREN 4056-002-2002 Aerospace Series Cable Ties for Harnesses Part 002: Index of Product Standards (Edition P 1)
PREN 4056-006-2012 Aerospace series Cable ties for harnesses Part 006: Peek cable ties For operating temperatures - 55 °C to 240 °C Product standard (Edition P 1)
PREN 4056-003-2018 Aerospace series Cable ties for harnesses Part 003: Plastic cable ties Operating temperatures – 65 °C to 105 °C and – 65 °C to 150 °C Product standard (Edition P 2)
PREN 4723-2013 Aerospace series Standardized measurement methods for comfort and living space criteria for aircraft passenger seats (Edition P 1)
TR 4618-2014 Aerospace series Aircraft internal air quality standards@ criteria and determination methods (Edition 1; Incorporated Corrigendum: 11/13/2014)
PREN 4261-1996 Aerospace Series Metallic Materials Rules for Drafting and Presentation of Test Method Standards (Edition P 1)
PREN 3567-003-1992 Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 003 - Single In-Line Couplers Product Standard (Edition P 1)
PREN 3567-004-1992 Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 004 - Double In-Line Couplers Product Standard (Edition P 1)
PREN 4056-004-2013 Aerospace series Cable ties for harnesses Part 004: Plastic cable ties For operating temperatures - 55 °C to 105 °C and - 55 °C to 150 °C Product standard (Edition P 1)

Society of Automotive Engineers (SAE), serial standard curve method

SAE MA1567B-2018 Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For
SAE MA1567B-1996 Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For
SAE J2271-2009 Ship Systems and Equipment Part Standard for Studs Continuous and Double End (Inch Series)

American National Standards Institute （ANSI), serial standard curve method

ANSI/SJI CJCOSP-1.0-2006 Standard Specifications and Code of Standard Practice for Composite Steel Joists, CJ-Series
BS ISO 13050:2022 Tracked Changes. Synchronous belt drives. Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys (British Standard)
BS EN IEC 61784-1-2:2023 Industrial networks. Profiles Fieldbus profiles. Communication Profile Family 2 (British Standard)
BS EN IEC 61784-1-4:2023 Industrial networks. Profiles Fieldbus profiles. Communication Profile Family 4 (British Standard)
BS EN IEC 61784-1-1:2023 Industrial networks. Profiles Fieldbus profiles. Communication Profile Family 1 (British Standard)
BS EN IEC 61784-1-6:2023 Industrial networks. Profiles Fieldbus profiles. Communication Profile Family 6 (British Standard)

SAE - SAE International, serial standard curve method

SAE MA1567C-2019 Insert@ Screw Thread@ Helical Coil Metric Series@ Standard Assembly Dimensions for

Aerospace, Security and Defence Industries Association of Europe (ASD), serial standard curve method

ASD-STAN PREN 4056-002-2012 Aerospace series Cable ties for harnesses Part 002: Index of product standards (Edition P 2)
ASD-STAN PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)
ASD-STAN TR 4815-2015 Aerospace series Flange couplings, up to 21 000 kPa Design standard Inch series (Edition 1)
ASD-STAN PREN 2349-413-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 413: Vibration, Sinusoidal and Random (Edition P 1)
ASD-STAN PREN 2591-403-2010 Aerospace series Elements of electrical and optical connection Test methods Part 403: Sinusoidal and random vibration (Edition P 2)
ASD-STAN PREN 3567-003-1992 Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 003 - Single In-Line Couplers Product Standard (Edition P 1)
ASD-STAN PREN 3567-004-1992 Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 004 - Double In-Line Couplers Product Standard (Edition P 1)
ASD-STAN PREN 4723-2013 Aerospace series Standardized measurement methods for comfort and living space criteria for aircraft passenger seats (Edition P 1)
ASD-STAN PREN 3567-001-1992 Aerospace Series Couplers for Use in Multiplex Data Bus Systems in Accordance with STANAG 3838 Part 001 - Technical Specification (Edition P 1)
ASD-STAN PREN 3373-010-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 °C for metric and inch stud series Product standard (Edition
ASD-STAN PREN 3373-011-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 °C for metric and inch stud series Product standard (Editi
ASD-STAN PREN 3708-003-1996 Aerospace Series Modular Interconnection Systems Terminal Junction Systems Part 003 : Removable Feedback Modules Version, Sealed Product Standard (Edition P 2)
ASD-STAN PREN 3708-004-1996 Aerospace Series Modular Interconnection Systems Terminal Junction Systems Part 004 : Removable Feedback Modules Version, Unsealed Product Standard (Edition P 2)
ASD-STAN PREN 4056-004-2013 Aerospace series Cable ties for harnesses Part 004: Plastic cable ties For operating temperatures - 55 °C to 105 °C and - 55 °C to 150 °C Product standard (Edition P 1)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, serial standard curve method

SERIES Y SUPP 49-2018 ITU-T Y.3500-series – Cloud computing standardization roadmap (Study Group 15)

Anhui Provincial Standard of the People's Republic of China, serial standard curve method

DB34/T 2392-2015 The main scale series of standard ship types of main cargo ships passing through the lock of Heyu Line

CENELEC - European Committee for Electrotechnical Standardization, serial standard curve method

PREN 50471-2005 Electromagnetic compatibility (EMC) - Product family emission standard for wire-line telecommunication networks
EN 61935-1:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 Part 1: Installed cabling
EN 61935-1:2009 Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in the standards series EN 50173

CEN - European Committee for Standardization, serial standard curve method

EN 3155-026:2006 Aerospace series Electrical contacts used in elements of connection Part 026: Contacts@ electrical@ male@ type A@ crimp@ class R Product standard (Incorporating Corrigendum 2006)
PREN 4618-2013 Aerospace series - Aircraft internal air quality standards@ criteria and determination methods
PREN 4666-2013 Aerospace series - Aircraft integrated air quality and pressure standards@ criteria and determination methods
EN 4681-005:2019 Aerospace series - Cables@ electric@ general purpose@ with conductors in aluminium or copper-clad aluminium - Part 005: AZ family@ single@ for use in low pressure atmosphere - Product standard

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, serial standard curve method

GB/T 30913-2014 Standard test method for classification of film systems for industrial radiography
GB/T 27408-2010 Quality control in laboratories.Evaluating validity of non-standard test method.Practice for a linear relationship

Aerospace Industries Association/ANSI Aerospace Standards, serial standard curve method

AIA/NAS NASM33537-2013 INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR (Rev 2)

AENOR, serial standard curve method

UNE-EN 3044:1998 AEROSPACE SERIES. INSTALLATION HOLES FOR INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING. DESIGN STANDARD.
UNE-EN 3149:1997 AEROSPACE SERIES. SHANK NUTS. INSTALLATION HOLES, 60o SWAGE, FLANGES. DESIGN STANDARD.

国家市场监督管理总局、中国国家标准化管理委员会, serial standard curve method

GB 38030.4-2019 Dimensions series of standard transport ship types passing the locks of inland rivers—Part 4：The “three lanes” of the Pearl River system
GB 38030.3-2019 Dimensions series of standard transport ship types passing the locks of inland rivers—Part 3：Xijiang main river

ETSI - European Telecommunications Standards Institute, serial standard curve method

ETSI EN 302 262:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Product family emission standard for wire-line telecommunication networks (V1.1.1)
TR 103 088-2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the EN 301 489 series of EMC standards (V1.1.1)
TR 103 088-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the EN 301 489 series of EMC standards (V1.2.1)
TR 103 088-2016 Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the ETSI EN 301 489 series of EMC standards (V1.3.1)
ETR 276-1996 Transmission and Multiplexing (TM); Open Network Provision (ONP) Leased Lines; Standardization Requirements for Synchronous Digital Hierarchy (SDH) Leased Lines

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, serial standard curve method

JEDEC JESD11-1984 Chip Carrier Pinouts Standardized for CMOS 4000, HC and HCT Series of Logic Circuits

CU-NC, serial standard curve method

NC 90-03-14-1988 Standards System for Metrological Assurance. Radiogonometers. Methods and Means of Calibration

National Electrical Manufacturers Association（NEMA), serial standard curve method

NEMA C119.0-2015 Electric Connectors - Testing Methods and Equipment Common to the ANSI C119 Family of Standards
NEMA C119.0-2015(1) Electric Connectors - Testing Methods and Equipment Common to the ANSI C119 Family of Standards

AIA/NAS - Aerospace Industries Association of America Inc., serial standard curve method

NASM33537-2017 INSERT@ SCREW THREAD@ HELICAL COIL@ INCH SERIES@ COARSE AND FINE THREAD@ STANDARD ASSEMBLY DIMENSIONS FOR (Rev 3)
NASM33537-2013 INSERT@ SCREW THREAD@ HELICAL COIL@ INCH SERIES@ COARSE AND FINE THREAD@ STANDARD ASSEMBLY DIMENSIONS FOR (Rev 2)
NASM33537-2002 Insert@ Screw Thread@ Helical Coil@ Inch Series@ Coarse and Fine Thread@ Standard Assembly Dimensions for
NASM33537-2009 INSERT@ SCREW THREAD@ HELICAL COIL@ INCH SERIES@ COARSE AND FINE THREAD@ STANDARD ASSEMBLY DIMENSIONS FOR (Rev 1)

Korean Agency for Technology and Standards (KATS), serial standard curve method

KS W ISO 7661-2009(2014) Aerospace－Fluid systems－Clamp blocks for tube lines having axial alignment－Design standard and qualification testing－Metric series

European Telecommunications Standards Institute (ETSI), serial standard curve method

ETSI TR 103 088-2016 Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the ETSI EN 301 489 series of EMC standards (V1.3.1)
ETSI TR 103 088-2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the EN 301 489 series of EMC standards V1.1.1
ETSI TR 103 088-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the EN 301 489 series of EMC standards (V1.2.1)

IN-BIS, serial standard curve method

IS 13742 Pt.2-1993 Carbide tipped single point tools. ISO series. Part 2: Cranked turning and facing tool (ISO 2). Specification

International Organization for Standardization (ISO), serial standard curve method

ISO/DIS 7661:2023 Aerospace Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing (Metric series)

Defense Logistics Agency, serial standard curve method

DLA DSCC-DWG-89034 REV B-2001 CONNECTOR, ELECTRICAL, RECEPTACLE, RADIO FREQUENCY, SERIES TNC, FLANGE MOUNTED, CRES BODY, SOLDER POCKET, STANDARD SCREWS

AT-ON, serial standard curve method

ONORM EN 3149-1996 Aerospace series-Shank nuts-Installation holes,60 degree swage,flanges-Design standard

Professional Standard - Machinery, serial standard curve method

JB/T 5920.1-1991 Series dimension of installation flange and shaft extension of incurve (outward force) type low speed large torque hydraulic motors Part 1: 20-25MPa pivot rotating motors

未注明发布机构, serial standard curve method

DIN EN IEC 61158-1:2020 Industrial communication networks – Fieldbuses – Part 1: Overview and guidelines for the standards of the IEC 61158 and IEC 61784 series

Aerospace Industries Association, serial standard curve method

AIA NASM33537-2002 Insert, Screw Thread, Helical Coil, Inch Series, Coarse and Fine Thread, Standard Assembly Dimensions for FSC 5340

GOSTR, serial standard curve method

GOST R 50779.70-2018 Statistical methods. Sampling procedures for inspection by attributes. Introduction to GOST R ISO 2859 series of standards

Shanghai Provincial Standard of the People's Republic of China, serial standard curve method

DB31/T 370.2-2006 Broadband Access Engineering Series Standards Part 2: Wireless Local Area Network Engineering Construction and Acceptance Test Specifications

American Society of Mechanical Engineers (ASME), serial standard curve method

ASME STP-PT-052-2012 ALIGN MECHANICAL AND CIVIL-STRUCTURAL EARTHQUAKE DESIGN AND QUALIFICATION RULES FOR ASME B31 PIPING SYSTEMS AND PIPELINES

American Gear Manufacturers Association, serial standard curve method

AGMA 9008-B00-2000 Flexible Couplings -- Gear Type -- Flange Dimensions, Inch Series

Professional Standard - Post and Telecommunication, serial standard curve method

YDN 074-1997 High-speed radio paging system base station subsystem technical requirements and test methods (internal standard)

Institute of Electrical and Electronics Engineers (IEEE), serial standard curve method

IEEE P2717/D4.1, June 2023 IEEE Draft Standard for Passive Intermodulation Test Methods for Wireless Systems in Low Noise Environments
IEEE/ANSI 802.4-1990 IEEE Standard for Information processing systems -- Local area networks --Part 4: Standard for Token-Passing Bus Access Method and Physical Layer Specifications
ANSI/IEEE Std 802.4-1990 IEEE Standard for Information processing systems -- Local area networks --Part 4: Standard for Token-Passing Bus Access Method and Physical Layer Specifications