ZH
RU
ES
High and low temperature test High and low temperature test
High and low temperature test High and low temperature test, Total:499 items.
In the international standard classification, High and low temperature test High and low temperature test involves: Energy and heat transfer engineering in general, Fibre optic communications, Road vehicle systems, Road vehicles in general, Electricity. Magnetism. Electrical and magnetic measurements, Environmental testing, Internal combustion engines for road vehicles, Thermodynamics and temperature measurements, TESTING, Photography, Mechanical testing, Railway rolling stock, Printed circuits and boards, Testing of metals, Wind turbine systems and other alternative sources of energy, Rails and railway components, Railway engineering in general, Rubber, Electrical accessories, Electrical and electronic testing, Optics and optical measurements, Optical equipment, Iron and steel products, Test conditions and procedures in general, Leather technology, Reinforced plastics, Lamps and related equipment, Pipeline components and pipelines, Fuel cells, Metalliferous minerals, Refractories, Lubricants, industrial oils and related products, Electrical engineering in general, Agricultural machines, implements and equipment, Electromechanical components for electronic and telecommunications equipment, Installations in buildings, Non-destructive testing, On-board equipment and instruments, Aerospace electric equipment and systems, Equipment for petroleum and natural gas industries, Vocabularies, Fluid storage devices, Ceramics, Telecommunication systems, Fuels, Raw materials for rubber and plastics, Textile fibres, Products of the textile industry, Analytical chemistry, Coals, Refrigerating technology, Insulating materials, Organic chemicals, Elements of buildings, Road engineering, Semiconductor devices, Protection against fire, Paint ingredients, Materials and articles in contact with foodstuffs, Cellular materials, Rubber and plastics products, Sewing machines and other equipment for the clothing industry, Nuclear energy engineering, Soil quality. Pedology, Hydraulic fluids, Protection of and in buildings, ELECTRICAL ENGINEERING, Plastics, Petroleum products in general, Galvanic cells and batteries.
PT-IPQ, High and low temperature test High and low temperature test
- NP ISO 3383:1999 Rubber General directions for achieving elevated or subnormal temperaturas for test purposes
- NP EN 1876-1-2000 Rubber-or plastics-coated fabrics Low temperature tests Part 1:Bending test
- NP EN 1876-2-2000 Rubber-or plastics-coated fabrics Low temperature tests Part 2:Impact test on loop
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, High and low temperature test High and low temperature test
- GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers
- GB/T 5565.3-2017 Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 3:Bending tests at high and low temperatures
American National Standards Institute （ANSI), High and low temperature test High and low temperature test
Indonesia Standards, High and low temperature test High and low temperature test
- SNI 09-4056-1996 Method of high and low temperatur test for motor vehicle parts
- SNI 07-6736-2002 Test methods for metallic materials elevating on high temperatures
- SNI 15-1783-1990 Chammote refractory mortars, hardened at high temperature
- SNI 07-1337-1989 Heat resistance steel and alloy steel at high temperature, Tensile test method
- SNI 06-6992.2-2004 Sediment - Part 2: Test methods of mercury (Hg) with cold vapour by mercury analyzer
Korean Agency for Technology and Standards (KATS), High and low temperature test High and low temperature test
- KS R 0016-1971(2010) Method of high and low temperature test for automobile parts
- KS R 0016-1971 Method of high and low temperature test for automobile parts
- KS C 0277-1997 Background information, Section 0ne -Cold and dry heat tests
- KS R 9191-1996 High and low temperature testing methods for parts of railway signaling
- KS R 9213-2007 Railway rolling stock－High and low temperature test methods of parts
- KS R 0016-2015 Method of high and low temperature test for automobile parts
- KS R 9213-2007(2017) Railway rolling stock－High and low temperature test methods of parts
- KS R 9191-1996(2016) High and low temperature testing methods for parts of railway signaling
- KS M ISO 3383-2002(2007) Rubber－General directions for achieving elevated or subnormal temperatures for test purposes
- KS M ISO 2921-2014(2019) Rubber, vulcanized — Determination of low-temperature retraction (TR test)
- KS B 0800-2001 Test methods for Vickers hardness at elevated temperatures
- KS M ISO 3383:2011 Rubber－General directions for achieving elevated or subnormal temperatures for test purposes
- KS L 1598-1994 Testing methods for elastic modulus of high performance ceramics at elevated temperature
- KS M ISO 10619-3:2014 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
- KS M ISO 10619-3-2014(2019) Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures
- KS C IEC 60068-2-39:2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
- KS C 0277-2013 Background information, Section 0ne -Cold and dry heat tests
- KS M ISO 2921:2009 Rubber, vulcanized-Determination of low-temperature characteristics-Temperature-retraction procedure(TR test)
- KS M ISO 2921:2014 Rubber, vulcanized — Determination of low-temperature retraction (TR test)
- KS B 0800-2001(2016) Test methods for Vickers hardness at elevated temperatures
- KS M ISO 1432-2014(2019) Rubber, vulcanized or thermoplastic — Determination of low temperature stiffening (Gehman test)
- KS E ISO 13930-2017(2022) Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by dynamic method
- KS C IEC 61180-2-2006(2016) High-voltage test techniques for low-voltage equipment — Part 2：Test equipment
- KS K 0150-2007(2012) Test method for dispersion stability of disperse dyes at high temperature
- KS C IEC 61180:2020 High-voltage test techniques for low-voltage equipment —Definitions, test and procedure requirements, test equipment
- KS M 1914-2002(2007) Phthalic anhydride for industrial use－Methods of test－Determination of impurities oxidizable in the cold by potassium permanganate－Iodometric method
- KS M 6722-2003 Testing methods of torsional modules at low temperature for vulcanized rubbers
- KS L 1608-1994 Testing method for fracture toughness of fine ceramics at elevated temperature
- KS L 1608-2014 Testing method for fracture toughness of fines ceramics at elevated temperature
Professional Standard - Electron, High and low temperature test High and low temperature test
- SJ/T 10212-1991 Testing equipment,high and low temperature/low air pressure Y60600-G
- SJ 2326-1983 Generic specification for high and low temperature low pressure test chambers
- SJ/T 31129-1994 Requirements of readiness and methods of inspection and assessment for high/low temperature test equipment
- SJ 2858-1988 Method for measurement of thermoelectric refrigeration modules properties--Test method for temperature difference and maximum cold side temperature
- SJ/T 11040-1996 Test method for viscosity of electronic glass at high temperature
- SJ/Z 9001.44-1987 Basic environmental testing procedures--Part 3: Background information--Section One:Cold and dry heat tests
- SJ 3232.1-1989 Test method for softening temperature of low-melting welding glass powder
GM Daewoo, High and low temperature test High and low temperature test
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, High and low temperature test High and low temperature test
- GB/T 10590-2006 Specifications for high and low temperature/low air pressure testing chambers
- GB/T 10590-2006(英文版) Specifications for high and low temperature/low air pressure testing chambers
- GB/T 10592-2008 Specifications for low/high temperature test chambers
- GB/T 10592-1989 Specification for low/high temperature test chambers
- GB/T 10592-2023 High and low temperature test chamber technical conditions
- GB/T 10591-2006(英文版) Specifications for high temperature/low air pressure testing chambers
- GB/T 2424.1-2005 Environmental testing for electric and electronic products Guidance for high temperature and low temperature tests
- GB/T 10591-2006 Specifications for high temperature/low air pressure testing chambers
- GB/T 10591-1989 Specification for high temperature/low air pressure test chambers
- GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products. Guidance for combined temperature (cold and heat)/low air pressure/vibration(sinusoidal)test
- GB/T 9868-1988 Rubber--General directions for achieving elevated or subnormal temperatures for test purposes
- GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
- GB/T 12085.2-1989 Optics and optical instruments--Environmental test methods--Cold, heat, humidity
- GB/T 2424.1-1989 Basic environmental testing procedures for electric and electronic products--Guidance for high temperature and low temperature tests
- GB/T 2424.1-2015 Environmental testing.Part 3:Supporting documentation and guidance.Cold and dry heat tests
- GB/T 12085.23-2022 Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
- GB/T 14999.2-1994 Methods of acid etch test for transvese macro-structures of heat-resisting superalloys
- GB/T 2423.59-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
- GB/T 5170.10-2017 Inspection methods for environmental testing equipments.Part 10:Combined high and low temperature/low air pressure testing equipments
- GB/T 12085.2-2022 Optics and photonics— Environmental test methods—Part 2: Cold, heat and humidity
- GB/T 9979-1988 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reducde temperatures
- GB/T 9979-2005 Guide rule of test for mechanical properties of fiber-reinforced plastics at elevated and reduced temperatures
- GB/T 14999.1-1994 Methods of acid etch test for longitudinal macro-structures of heat-resisting superalloy bars
- GB/T 24204-2009 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by dynamic method
- GB/T 7759-1996 Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
- GB/T 5170.10-2008 Inspection methods for environmental testing equipments for electric and electronic products.Combined high and low temperature/low air pressure testing equipments
- GB/T 12085.2-2010 Optics and optical instruments.Enviromental test methods.Part 2:Cold,heat,humidity
- GB/T 2424.22-1986 Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests
- GB/T 12085.10-1989 Optics and optical instruments--Environmental test methods--Combined sinusoidal vibration,dry heat,cold
- GB/T 12085.16-1995 Optics and optical instruments--Environmental test methods--Combined bounce or steady state acceleration, in dry heat or cold
- GB/T 7758-1987 Rubber, vulcanized--Determination of low temperature characteristics--Temperature-retraction procedure(TR test)
- GB/T 7758-2002 Rubber,vulcanized--Determination of low-temperature characteristics--Temperature-retraction procedure (TR test)
- GB/T 5170.10-1996 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products. Combined high and low temperature/low air pressure testing equipment
- GB/T 12085.10-2010 Optics and optical instruments.Environmental test methods.Part 10:Combined sinusoidal vibration and dry heat or cold
- GB/T 12085.21-2011 Optics and optical instruments.Enviromental test methods.Part 21: Combined low pressure and ambient temperature or dry heat
- GB/T 12085.13-1989 Optics and optical instruments--Environmental test methods--Shock,bump or freefall,dry heat,cold
- GB/T 1682-2014 Rubber,vulcanized.Determination of low-temperature brittleness.Single test piece method
- GB/T 15256-1994 Rubber, vulcanized--Determination of low-temperature brittleness(multiple test piece method)
- GB/T 1682-1994 Rubber, vulcanized--Determination of low-temperature brittleness (single test piece method)
- GB/T 12085.22-2022 Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration
- GB/T 12085.15-1995 Optics and optical instruments--Environmental test methods--Combined random vibration wideband--Reproducibility medium, in dry heat or cold
- GB/T 2423.26-1992 Basic environmental testing procedures for electric and electronic products--Test Z/BM: combined heat/low air pressure tests
- GB/T 18443.3-2001 Testing method of cryo-insulation pressure vessels leakage measurement
- GB/T 18443.1-2001 Testing method of cryo-insulation pressure vessels volume measurement
- GB/T 12085.16-2010 Optics and optical instruments.Environmental test methods.Part 16:Combined bounce or steady-state acceleration and dry heat or cold
- GB/T 22888-2008 Leather.Physical and machanical tests.Determainition of cold crack temperature of surface coatings
- GB/T 22586-2008 Measurements of surface resistance of high temperature superconductor thin films at microwave frequencies
- GB/T 18443.2-2001 Testing method of cryo-insulation pressure vessels vacuum measurement
- GB/T 12085.13-2010 Optics and optical instruments.Environmental test methods.Part 13:Combined shock,bump or free fall and dry heat or cold
- GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
- GB/T 12085.15-2010 Optics and optical instruments.Environmental test methods.Part 15:Combined digitally controlled broad-band random vibration and dry heat or cold
- GB/T 14999.2-2012 Test methods for superalloys.Part 2:Verification of transverse macro-structures and defect by etch
- GB/T 14999.1-2012 Test method for superal loys.Part 1:Verification of longitudinal macro-structures and defect by etch
- GB/T 18443.4-2001 Testing method of cryo-insulation pressure vessels leak and outgassing rate measurement
- GB/T 18443.5-2001 Testing method of cryo-insulation pressure vessels static vaporation rate measurement
- GB/T 10261-1988 Test procedures for stabilized d.c high/low voltage power for nuclear instruments
- GB/T 328.15-2007 Test methods for building sheets for waterproofing Part 15: Bitumen sheets for waterproofing-foldability at low temperature
TIA - Telecommunications Industry Association, High and low temperature test High and low temperature test
- EIA/TIA-455-37A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable
- TIA/EIA-455-37A-1993 FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable (Revision of EIA-455-37)
- TIA/EIA-455-188-1991 FOTP-188 Low Temperature Testing of Fiber Optic Components
- EIA/TIA-455-188-1991 FOTP-188 Low Temperature Testing of Fiber Optic Components
- EIA/TIA-455-69A-1991 FOTP-69 Test Procedure for Evaluating the Effect of Minimum and Maximum Exposure Temperatures on the Optical Performance of Optical Fibers
- EIA/TIA-455-190-1992 FOTP-190 Low Air Pressure (High Altitude) Testing of Fiber Optic Components
Taiwan Provincial Standard of the People's Republic of China, High and low temperature test High and low temperature test
- CNS 5434-1989 Method of Test for High and Low Temperature for Automobile Parts
- CNS 11788-1986 Method of Test for Fiber Optic Devices (FOTP-37 Cable Bend Test Low and High Temperature)
- CNS 12867-1991 Basic Environmental Testing Procedures Part 2 : Tests-Test Z/AM : Combined Dry Heat/Low Air Pressure Tests
Professional Standard - Machinery, High and low temperature test High and low temperature test
- JB/T 8250.5-1999 High-temperature and low-temperature test method for cameras
- JB/T 6865-1993 Pendulum type high and low temperature impact testing machine technical conditions
工业和信息化部/国家能源局, High and low temperature test High and low temperature test
- JB/T 13229-2017 High and low temperature environmental chamber for testing machine
(U.S.) Telecommunications Industries Association , High and low temperature test High and low temperature test
Professional Standard - Aviation Industry, High and low temperature test High and low temperature test
- Q/HBm 109-1994 High temperature and low temperature test methods for auto parts
Professional Standard - Military and Civilian Products, High and low temperature test High and low temperature test
- WJ 749-1994 Water immersion, low temperature, high temperature and high humidity test methods for glue used in optical instruments
工业和信息化部, High and low temperature test High and low temperature test
- WJ/T 749-2014 Test methods for water immersion, low temperature, high temperature and high humidity for glue used in optical instruments
- JB/T 13702.1-2019 Camera Environmental Testing Part 1: High and Low Temperature Tests
Japanese Industrial Standards Committee (JISC), High and low temperature test High and low temperature test
- JIS E 4035 AMD 1:2011 Railway rolling stock.High and low temperature test methods of parts (Amendment 1)
- JIS E 3019:1979 High and low temperature testing methods for parts of railway signaling
- JIS E 4035:1995 Railway rolling stock.High and low temperature test methods of parts
- JIS D 0204:1967 Method of high and low temperature test for automobile parts
- JIS E 3019:2018 High and low temperature testing methods for parts of railway signalling
- JIS K 6542:1974 Testing methods for cold resistance of leather
- JIS Z 2279:1992 Method of high temperature low cycle fatigue testing for metallic materials
- JIS K 6262:2006 Rubber, vulcanized or thermoplastic -- Determination of compression set at ambient, elevated or low temperatures
- JIS K 6262:2013 Rubber, vulcanized or thermoplastic.Determination of compression set at ambient, elevated or low temperatures
- JIS K 6261-3:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 3: Low temperature stiffening (Gehman test)
- JIS K 6261-4:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 4: Low-temperature retraction (TR test)
- JIS S 3200-2:1997 Equipment for water supply service -- Test method of low temperature resistant
- JIS R 1606:1995 Testing methods for tensile strength of fine ceramics at room and elevated temperature
- JIS R 1617:2010 Testing method for fracture toughness of fine ceramics at elevated temperature
- JIS R 1605:1995 Testing methods for elastic modulus of fine ceramics at elevated temperature
- JIS R 1623:1995 Testing method for vickers hardness of fine ceramics at elevated temperatures
- JIS R 1658:2003 Testing methods for bending fatigue of fine ceramics at elevated temperatures
ES-AENOR, High and low temperature test High and low temperature test
Group Standards of the People's Republic of China, High and low temperature test High and low temperature test
- T/CSTM 00989-2023 Test method for microwave parameters under high temperature, low temperature, temperature cycling and humidity
- T/CASME 787-2023 High and low temperature environment simulation device for automotive engine testing
- T/GHDQ 47-2019 Technical conditions of fuel cell stack life test at subzero environment for fuel cell vehicles in frigid regions
- T/WHQASA 1-2021 Test method for high and low temperature matching dimensions of automobile composite outer cover
- T/CIMA 0058-2022
- T/GDBX 017-2019 Low Temperature Bending Resistance Tester for Uppers of Footwear - Cold Resistance Testing Machines - Specification
AT-ON, High and low temperature test High and low temperature test
- ONORM C 9436-1994 Testing of elastomers - Determination of compression set under constant deflection at normal temperature, at higher and low temperatures
- ONORM EN 10002-5-1992 Metallic materials - Tensile testing - Method of testing at elevated temperature
Professional Standard - Aviation, High and low temperature test High and low temperature test
- HBm 60-1987 High-temperature and low-temperature test methods for instrumentation of miniature automobiles
- HB 5237-1983 Determination of low temperature properties of vulcanized rubber - Test method for retraction temperature (TR test)
RU-GOST R, High and low temperature test High and low temperature test
- GOST 9454-1978 Metals. Method for testing the impact strength at low, room and high temperature
- GOST 25.602-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
- GOST 25.603-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
- GOST 25.604-1982 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
- GOST 33519-2015 Polymer composites. Test method for compression at normal, low and high temperatures
- GOST 25.601-1980 Design calculation and strength testings. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures
- GOST 34195-2017 Diesel fuels. Determination of filterability by low-temperature flow test (LTFT)
- GOST 16126-1991 Coal. Determination of caking power. Gray-King method
- GOST R IEC 811-1-4-1994 General test methods for insulating and sheathing materials of electric cables. Tests at low temperature
- GOST R 55033-2012 Public roads and highways. Geosynthetic for road construction. Test method for determination of flexibility at low temperature
- GOST R ISO 18766-2017 Vulcanized rubber and thermoplasts. Low temperature testing. General requirements
Professional Standard - Aerospace, High and low temperature test High and low temperature test
- QJ 20052-2011 Cryogenic test method for high pressure helium valve
- QJ 1402-1988 Test method for low temperature thermal conductivity of metals
- QJ 3061-1998 Hydrogen-oxygen rocket engine low temperature and high speed bearing test method
- QJ 20027-2011 Test method for thermal conductivity of thermal conductive grease at low temperature
- QJ 2506-1993 High temperature Young's modulus test method
- QJ 1086-1986 Cryogenic temperature measurement specification for liquid rocket engine test
- QJ 968-1986 Test method for low temperature specific heat capacity of solid materials
- QJ 1521-1988 Test method for deep low temperature specific heat capacity of solid materials
- QJ 1522-1988 Test method for low temperature linear thermal expansion coefficient of rigid solid
- QJ 1114-1987 Low-temperature hemispherical total emissivity test method for thermal control coatings
Liaoning Provincial Standard of the People's Republic of China, High and low temperature test High and low temperature test
- DB21/T 2761-2017 High and low temperature test specification for wind power gearbox
CZ-CSN, High and low temperature test High and low temperature test
国家市场监督管理总局、中国国家标准化管理委员会, High and low temperature test High and low temperature test
- GB/T 2423.63-2019 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）
- GB/T 7758-2020 Rubber, vulcanized—Determination of low-temperature characteristics—Temperature-retraction procedure (TR test)
- GB/T 22888-2021 Leather—Physical and mechanical tests—Determination of cold crack temperature of surface coatings
- GB/T 40286-2021 The performance testing method of bi-circulation unit for low-temperature waste heat recovery and utilization
Professional Standard - Railway, High and low temperature test High and low temperature test
- TB/T 2953-2015 High and low temperature testing methods for parts of railway signaling
- TB/T 2953-1999 High temperature and low temperature test methods for railway ground signal products
Association Francaise de Normalisation, High and low temperature test High and low temperature test
- NF T40-104:1976 Rubber. General directions for achieving elevated or subnormal temperatures for tests.
- NF T46-011:1991 Rubber, vulcanized or thermoplastic. Determination of compression set at ambient, elevated or low temperatures.
- NF C20-701*NF EN 60068-2-1:2007 Environmental testing - Part 2-1 : tests - Tests A : cold.
- NF T46-032:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test).
- NF C20-700-2-39*NF EN 60068-2-39:2016 Environmental testing - Part 2-39 : tests - Tests and guidance : combined temperature or temperature and humidity with low air pressure tests
- NF C93-400-11-2*NF EN 60512-11-2:2002 Connectors for electronic equipment - Tests and measurements - Part 11-2 : climatic tests - Test 11b : combined/sequential cold, low air pressure and damp heat.
- NF ISO 2921:2020 Caoutchouc vulcanisé - Détermination des caractéristiques à basse température - Méthode température-retrait (essai TR)
- NF T47-203-3*NF EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3 : bending tests at high and low temperatures.
- NF EN ISO 10619-3:2012 Tuyaux et tubes en caoutchouc et en plastique - Mesurage de la flexibilité et de la rigidité - Partie 3 : essais de courbure à des températures basses et élevées
- NF EN 3745-405:2013 Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 405 : essai de courbure aux températures basse/haute
- NF EN 60068-2-39:2016 Essais d'environnement - Partie 2-39 : essais - Essais et lignes directrices : essais combinés de température ou de température et d'humidité à basse pression atmosphérique
- NF T46-032:1977 Vulcanized rubber. Determination of low temperature characteristics. Temperature-retraction procedure(tr test).
- NF T46-032*NF ISO 2921:2020 Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- NF L52-400-405*NF EN 3745-405:2013 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: low/High temperature bend test
- NF X41-035*NF EN 12024:1996 Self adhesive tapes. Measurement of resistance to elevated temperature and humidity.
- NF EN ISO 17703:2018 Chaussures - Méthodes d'essai des tiges - Comportement aux températures élevées
- NF C41-106*NF EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
- NF T20-738:1967 Chemical analysis of phthalic anhydride. Determination of impurities oxidizable in the cold by potassium permanganate.
- NF T46-025:2013 Rubber, vulcanized or thermoplastic - Determination of low temperature stiffening (Gehman test)
- NF EN 3102:2014 Série aérospatiale - Produits d'étanchéité - Methodes d'essai - Détermination de la flexibilité à basse température
- NF EN IEC 62984-2:2020 Batteries d'accumulateurs à haute température - Partie 2 : exigences de sécurité et essais
- NF A09-120-5*NF EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5 : penetrant testing at temperatures higher than 50 oC.
- NF EN 12814-6:2000 Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 6 : essai de traction à basse température
- NF ISO 1432:2021 Caoutchouc vulcanisé ou thermoplastique - Détermination de la rigidité à basse température (Essai Gehman)
- NF A03-001-2:2011 Metallic materials - Tensile testing - Part 2 : method of test at elevated temperature.
- NF C58-484-2*NF EN IEC 62984-2:2020 High-temperature secondary batteries - Part 2 : safety requirements and tests
Standard Association of Australia （SAA）, High and low temperature test High and low temperature test
Professional Standard - Ocean, High and low temperature test High and low temperature test
- HY 21.1-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature test
- HY 21.2-1992 The basic method of environmental test for oceanographic instruments - Guideline for high and low temperature storage test
British Standards Institution (BSI), High and low temperature test High and low temperature test
- BS EN 60068-2-1:2007 Environmental testing - Tests - Test A. Cold
- BS 903-A6:1992 Physical testing of rubber - Method for determination of compression set at ambient, elevated or low temperatures
- BS ISO 10619-3:2011 Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at high and low temperatures
- BS EN 60068-3-2:1999 Environmental testing. Guidance. Combined temperature/low air pressure tests
- BS 903-A29:1997 Physical testing of rubber - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- BS EN ISO 6892-2:2018 Metallic materials. Tensile testing - Method of test at elevated temperature
- BS EN 60068-2-39:2016 Tracked Changes. Environmental testing. Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
- BS ISO 789-12:2000 Agricultural tractors. Test procedures - Low temperature starting
- BS ISO 2921:2019 Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)
- BS ISO 2921:2011 Rubber, vulcanized. Determination of low-temperature retraction (TR test)
- BS EN ISO 3452-6:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10 degrees C
- BS EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures lower than 10 degrees C
- BS EN IEC 62984-2:2020 High-temperature secondary batteries - Safety requirements and tests
- BS EN ISO 17233:2003 Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings
- BS EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11j - Cold
- BS 903-A25:1992 Physical testing of rubber - Determination of low-temperature brittleness
- BS ISO 1432:2013 Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening (Gehman test)
- BS ISO 1432:2021 Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening (Gehman test)
- BS EN 3745-405:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Low/High temperature bend test
- 22/30423707 DC BS ISO 5119. Low Temperature Sealing Capability of Elastomeric Seals. Test Methods
- BS EN 60512-11-2:2002 Connectors for electronic equipment - Tests and measurements - Climatic tests - Test 11b - Combined/sequential cold, low air pressure and damp heat
- BS 2782-7 Method 740C:1996 Methods of testing plastics. Rheological properties. Polymer dispersions. Determination of white point temperature and minimum film-forming temperature
KR-KS, High and low temperature test High and low temperature test
- KS R 9213-2007(2017)(英文版) Railway rolling stock－High and low temperature test methods of parts
- KS C IEC 60068-2-39-2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
- KS M ISO 2921-2022 Rubber, vulcanized Determination of low temperature characteristics Temperature retraction procedure(TR test)
- KS E ISO 13930-2017 Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by dynamic method
- KS C IEC 61180-2020 High-voltage test techniques for low-voltage equipment —Definitions, test and procedure requirements, test equipment
RO-ASRO, High and low temperature test High and low temperature test
- STAS SR ISO 815+A1:1995 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures
- STAS 11388/8-1990 Cables and wires TEST METHODS Low temperature test
- STAS 10897/5-1986 TESTS OF METALS Mechanical testings of soldering and brazed joints at low temperatures
- STAS 6638-1987 Metals tcsting HIGH TEmpEratuResTEns1lE tEst of mEtaiLEc matEriat.s
- STAS 6834-1975 Tests of metals TENSILE TEST AT LOW TEMPERATURES
- STAS 6833-1979 Testing of metals NOTCH IMPACT TEST AT LOW TEMPERATURES
- STAS 6596-1981 Test of metals NON-INTERRUPTED CREEP TESTING OF STEEL AT ELEVATED TEMPERATURES
- STAS SR ISO 2285:1995 Vulcanized or thermoplastic rubber — Determination of tension set at normal and high temperatures
- STAS 8894/2-1981 Testing of metals STEEL CREEP STRESS RUPTURE TESTING AT ELEVATED TEMPERATURES Data processing methods
ECIA - Electronic Components Industry Association, High and low temperature test High and low temperature test
- EIA-364-105B-2015 TP-105B Altitude – Low Temperature Test Procedure for Electrical Connectors and Sockets
- EIA/ECA-364-105A-2008 TP-105A ALTITUDE – LOW TEMPERATURE TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS
- 364-59-1988 TP-59 Low Temperature Test Procedure for Electrical Connectors
- EIA-364-105-1999 TP-105 Altitude - Low Temperature Test Procedure for Electrical Connectors
- EIA-364-59A-2006 TP-59A Low Temperature Test Procedure for Electrical Connectors and Sockets
Electronic Components, Assemblies and Materials Association, High and low temperature test High and low temperature test
- ECA EIA-364-105-1999 TP-105 Altitude - Low Temperature Test Procedure for Electrical Connectors
- ECA SP 5163-2007 Altitude ?Low Temperature Test Procedure for Electrical Connectors To be published as ANSI/EIA/ECA-364-105-A
- EIA_ECA-364-59A-2006 TP-59A Low Temperature Test Procedure for Electrical Connectors and Sockets
- EIA/ECA-364-59A-2006 TP-59A Low Temperature Test Procedure for Electrical Connectors and Sockets
- ECA EIA-364-105B-2015 TP-105B Altitude - Low Temperature Test Procedure for Electrical Connectors and Sockets
IPC - Association Connecting Electronics Industries, High and low temperature test High and low temperature test
Institute of Environmental Sciences and Technology, High and low temperature test High and low temperature test
Military Standard of the People's Republic of China-General Armament Department, High and low temperature test High and low temperature test
- GJB 573.7-1988 Fuze environment and performance test methods High and low temperature storage test
- GJB 796.6-1990 High and low temperature test procedures for design and finalization of military fixed bridge beam equipment
- GJB 8806-2015 Test method for high temperature resistivity of paint film
- GJB 328-1987 Test method for low-temperature steady-state thermal conductivity of thermal insulation materials
- GJB 983.4-1993 Test methods for military rubber films - Determination of low-temperature elasticity
- GJB 6612-2008 Test method for aerodynamic force measurements in hypersonic low density wind tunnel
- GJB 987.4-1991 Weather balloon test method for determination of low temperature elongation properties
- GJB 10247.2-2021 Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 2: Peel strength
- GJB 10247.3-2021 Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 3: Tear-off strength
- GJB 10252-2021 Test method for high-temperature steady-state thermal conductivity of thermal insulation materials
- GJB 10247.1-2021 Test methods for high temperature mechanical properties of high temperature resistant adhesives/sealants Part 1: Tensile shear strength
SE-SIS, High and low temperature test High and low temperature test
- SIS 11 23 19-1966 Test piece for testing metals at elevated temperatures
- SIS SS 24 11 11-1983 Roofing foils - Testing - Bending at low temperature
- SIS 11 23 16-1966 Non-interrupted creep testing of steel at elevated temperatures
- SIS 11 23 16-1973 Non-interrupted creep testing of steel at elevated temperatures
- SIS SS 11 23 19-1982 Metalic materials — Test piece for testing metals at elevated temperatures
- SIS SS 11 23 16-1982 Steel Non-interrupted creep testing at elevated temperatures
- SIS SS-ISO 2921:1990 Rubber, vulcanized — Determination of low temperature characteristics — Temperature-retraction procedure (TR test)
- SIS SS 02 48 31-1989 Fire test — Building products — Small chimneys — Testing at elevated temperatures
- SIS 16 22 16-1968 Rubber. Determination of relative torsional stiffness at low temperature. Gehman-test
- SIS SS-ISO 7481:1985 Aerospace - Fasteners - Self-locking nuts with maximum operating tern pera- ture less than or equal to 425 °C - Test methods
- MNC 323-1982 Metallic materials - Testing at elevated temperatures. Creep testing. Relaxation testing
- MNC 323 E-1984 Metallic materials - Testing at elevated temperatures. Creep testing . Relaxation testing - Summary
- MNC 323-1979 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing
- MNC 323 E-1981 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing — Summary
- MNC 323-1981 Metallic materials — Testing at elevated temperatures. Creep testing. Relaxation testing
- MNC 323 E-1982 Metallic materials - Testing at elevated temperatures. Creep testing . Relaxation testing - Summary
- MNC 323-1984 Metallic materials - Testing at elevated temperatures. Creep testing. Relaxation testing
- SIS SS 16 22 16-1986 Rubber and thermoplastic elastomer - Low temperature stiffening (Gehman test) - Determination
Guangdong Provincial Standard of the People's Republic of China, High and low temperature test High and low temperature test
- DB44/T 1894-2016 Test method for high and low temperature weather resistance of LED street lamps and tunnel lamps
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, High and low temperature test High and low temperature test
- PREN 3745-405-2010 Aerospace series Fibres and cables@ optical@ aircraft use Test methods Part 405: Low/high temperature bend test (Edition P 1)
- PREN 3102-1996 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility
- PREN 3102-2000 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility (Edition P 1)
PL-PKN, High and low temperature test High and low temperature test
- PN C04237-05-1991 Rubber test methods at Iow temperatur? Determination of stiffening (Gehman test)
- PN H04311-1967 S?a?ic ?ensile testing of me?als at Iow temperatures
- PN H04372-1974 Impact test for metals at elevated temperatures
- PN M35350-1987 Gaz central heating boiler lowtemperature Re?uirements and tests
- PN C05011 ArkusZ06-1972 Test methods of conveyer belts Determination of the resistance to Iow temperatures
- PN E04160-69-1988 Electric cables Test methods Methods of heating cables for electrical tests in elevated temperatures
- PN E04443-1965 Solid elec?rical insula?ing ma?erials Testing of highcurrent and lowvol?age arc resis?ance
- PN E06211-1973 Industrial Iow temperature batch-type electric res?stance furnaces Generals reguirements and tests
- PN C89085-21-1988 Epoxy resins Methods of testing Determination of the peak temperatur?
- PN A55653-1988 Commercial refrigerated display cases Low temperatur? display cases Requirements and testing
- PN E04160-46-1987 Electric cables Methods of testing Test of resistance to Iow temperature of rubber of thermoplastic insulation of sheath
- PN E04441-1974 Solid insulating materials Testing of high-voltage, low-current arc resistance
- PN C89085-11-1987 Epoxy resins Methods of testing Determination of durability in elevated temperatur?
GM Global, High and low temperature test High and low temperature test
- GMW 14692-2012 Methods of Test for Sound Deadener Pads; Test for Low Temperature Resistance Issue 2; English
YU-JUS, High and low temperature test High and low temperature test
- JUS G.S0.052-1990 Rubber. General directions for achieving elevated or subnormal temperatures for test purposes
- JUS N.C0.056-1980 Testing offlacible cords and cables. Elasticity at low temperatures
- JUS N.A5.901-1984 Basic environmental testing procedures. Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test
- JUS N.C0.056-1985 Electrical povverand lighting\ Testing of insulatedconductors andcables. Elasticity atlow temperatures
- JUS N.A5.705-1980 Basic environmental testing procedures. Test Aa: Cold of non heat-dissipating components, ajuipment or other articles with sudden change of temperature
ES-UNE, High and low temperature test High and low temperature test
- UNE-EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
- UNE-EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test (Endorsed by AENOR in August of 2012.)
- UNE-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
- UNE-EN ISO 17703:2019 Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003)
- UNE-EN 2349-318:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 318: Pick-up voltage at high temperature and drop-out voltage at low temperature (Endorsed by AENOR in March of 2007.)
- UNE-EN ISO 6892-2:2018 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018)
Society of Automotive Engineers (SAE), High and low temperature test High and low temperature test
- SAE TS326-1-1985 TS326 Test for Electrical Connectors Low Temperature Handling
- SAE AIR43-1995 Low Temperature Torque Test for Aircraft Greases
- SAE TS332-2-1987 TS332 Test for Electrical Connectors High Temperature Cyclic Endurance
- SAE J1937-1995 ENGINE TESTING WITH LOW-TEMPERATURE CHARGE AIR-COOLER SYSTEMS IN A DYNAMOMETER TEST CELL
- SAE TS377-1-1990 TS377 Test for Silicone Elastomer High Temperature Endurance and Fluid Resistance
(U.S.) Ford Automotive Standards, High and low temperature test High and low temperature test
SAE - SAE International, High and low temperature test High and low temperature test
- SAE AIR43-1955 Low Temperature Torque Test for Aircraft Greases
- SAE J1937-1989 ENGINE TESTING WITH LOW TEMPERATURE CHARGE AIR COOLER SYSTEMS IN A DYNAMOMETER TEST CELL
- SAE J1937-2002 Engine Testing with Low-Temperature Charge Air-Cooler Systems in a Dynamometer Test Cell@ Recommended Practice
- SAE J1937-2011 Engine Testing with Low-Temperature Charge Air-cooler Systems in a Dynamometer Test Cell
FI-SFS, High and low temperature test High and low temperature test
International Organization for Standardization (ISO), High and low temperature test High and low temperature test
- ISO 815:1991 Rubber, vulcanized or thermoplastic; determination of compression set at ambient, elevated or low temperatures
- ISO/R 783:1968 Mechanical testing of steel at elevated temperatures — Determination of lower yield stress and proof stress and proving test
- ISO 2921:2005 Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
- ISO 1432:1976 Title missing - Legacy paper document
- ISO 2921:1975 Title missing - Legacy paper document
- ISO 2921:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test)
- ISO 1432:1982 Rubber, vulcanized — Low temperature stiffening (Gehman test) — Determination
- ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
- ISO 2921:1982 Rubber, vulcanized; Determination of low temperature characteristics; Temperature- retraction procedure (TR test)
- ISO 2921:2019 Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)
- ISO 815:1991/Cor 1:1993 Rubber, vulcanized or thermoplastic; determination of compression set at ambient, elevated or low temperatures; Technical Corrigendum 1
- ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C
- ISO 1432:1988 Rubber, vulcanized or thermoplastic; determination of low temperature stiffening (Gehman test)
- ISO 1432:2021 Rubber, vulcanized or thermoplastic - Determination of low-temperature stiffening (Gehman test)
- ISO 1432:2013 Rubber, vulcanized or thermoplastic - Determination of low-temperature stiffening (Gehman test)
- ISO/R 205:1961 Determination of proof stress and proving test for steel at elevated temperature
Aerospace, Security and Defence Industries Association of Europe (ASD), High and low temperature test High and low temperature test
- ASD-STAN PREN 3745-405-2010 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 405: Low/high temperature bend test (Edition P 1)
American Society for Testing and Materials (ASTM), High and low temperature test High and low temperature test
- ASTM D5133-01 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM E1311-89(2004) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM C1774-13(2019) Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
- ASTM D5133-99 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-19 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-20 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- ASTM D832-07 Standard Practice for Rubber Conditioning For Low Temperature Testing
- ASTM D832-07(2012) Standard Practice for Rubber Conditioning For Low Temperature Testing
- ASTM E639-78(1996)e1 Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
- ASTM E639-78(2002) Standard Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
- ASTM G142-98(2004) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- ASTM G142-98 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- ASTM G142-98(2011) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
- ASTM C1774-13 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
- ASTM E531-76(1996)e1 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
- ASTM D3232-88 Test Method for Measurement of Consistency of Lubricating Greases at High Temperatures
- ASTM D4539-22 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D2354-10(2023) Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
- ASTM D2354-10(2018) Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
- ASTM D3769-96(2000) Standard Test Method for Microcellular Urethanes--High Temperature Sag
- ASTM D3769-96 Standard Test Method for Microcellular Urethanes--High Temperature Sag
- ASTM D3769-20 Standard Test Method for Microcellular Urethanes—High-Temperature Sag
- ASTM D6082-23 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- ASTM D4539-98 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D453-94(2000)e1 Standard test method for filterability of diesel fuel by cryogenic flow test
- ASTM D7110-05a Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
- ASTM D6351-99 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
- ASTM D6351-99(2005) Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
- ASTM D1552-90e1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
- ASTM D1552-95 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
- ASTM D1552-83 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
IN-BIS, High and low temperature test High and low temperature test
SG-SPRING SG, High and low temperature test High and low temperature test
- SS 11 Pt.17-1986 Methods Of Sampling And Test For Oils And Fats Part 17 : Cold Test
GM Europe, High and low temperature test High and low temperature test
- GME6718-2007 GMLAN Device Test Specification High Speed/Low Speed English; This specification may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14241.
- GME 6718-2007 GMLAN Device Test Specification High Speed/Low Speed
German Institute for Standardization, High and low temperature test High and low temperature test
- DIN EN 3745-405:2012-10 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/high temperature bend test; German and English version EN 3745-405:2012
- DIN ISO 815:2000 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993)
- DIN EN ISO 10619-3:2012-03 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011); German version EN ISO 10619-3:2011
- DIN EN ISO 17703:2018-12 Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003); German version EN ISO 17703:2018
- DIN 10360:1972 Fruit and vegetables; determination of dry matter content of deep-frozen or heat-preserved spinach
- DIN 53545:2016-12 Testing of rubber - Determination of low-temperature behaviour of elastomers - Principles and test methods
- DIN 53545:1990 Determination of low-temperature behaviour of elastomers; principles and test methods
- DIN IEC 60345:1996 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures (IEC 60345:1971); German version HD 438 S1:1984
- DIN EN ISO 17703:2018 Footwear - Test methods for uppers - High temperature behaviour (ISO 17703:2003)
- DIN EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C (ISO 3452-6:2008); English version of DIN EN ISO 3452-6:2009-04
BE-NBN, High and low temperature test High and low temperature test
- NBN T 31-022-1985 Rubber, vulcanized - Low température stiffening (Gehman test) - Determination
- NBN-ISO 815:1994 Rubber, vulcanized or thermoplastic. Determination of compression set at ambient, elevated or low temperatures
- NBN T 31-031-1985 Rubber, vulcanized - Determinationof low temperature characteristics- Temperature-re-traction procedure(TR test)
TR-TSE, High and low temperature test High and low temperature test
- TS 3047-1978 METHOD OF TEST FOR TEMPERATURE LIMIT OF BRITTLENESS FOR VULCANIZED RUBBERS
- TS 2651-1977 Rubber, Vulcanized - Determination Of Stiffness At Low Temperature (Gehman Test)
- TS 3520-1980 ELEVATED TEMPERATURES TENSILE TESTING OF METALLIC MATERIALS EXCEPT STEELS
Lithuanian Standards Office , High and low temperature test High and low temperature test
- LST EN 60068-2-1-2007 Environmental testing - Part 2-1: Tests - Test A: Cold (IEC 60068-2-1:2007)
- LST EN 3745-405-2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
- LST ISO 789-12:2001 Agricultural tractors. Test procedures. Part 12: Low temperature starting
- LST EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
- LST EN 61180-2-2001 High-voltage test techniques for low-voltage equipment. Part 2: Test equipment (IEC 61180-2:1994)
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, High and low temperature test High and low temperature test
- GJB 6401-2008 Test method for resistivity of coating film at high temperature
National Electrical Manufacturers Association（NEMA), High and low temperature test High and low temperature test
NEMA - National Electrical Manufacturers Association, High and low temperature test High and low temperature test
- NEMA HP 1-1979 High Temperature Insulated Wire Impulse Dielectric Testing
AENOR, High and low temperature test High and low temperature test
- UNE 112016:2011 High temperature corrosion. Test for the determination of the Pilling-Bedworth ratio.
- UNE 28581:1986 AEROSPACE. FASTENERS. SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERTURE LESS THAN OR EQUAL TO 425oC. TEST METHODS.
- UNE-ISO 2921:2017 Rubber, vulcanized. Determination of low temperature retraction (TR test)
- UNE-EN 61180-2:1996 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT. PART 2: TEST EQUIPMENT.
- UNE 7321:1975 INTERRUPTED CREEP TESTING OF STEEL AT ELEVATED TEMPERATURES (LOAD AND TEMPERATURA INTERRUPTED).
- UNE-EN 61180:2017 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
- UNE-EN 60068-3-1:2012 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
- UNE 51215:1987 STANDARD TEST METHOD FOR SULFUR IN PETROLEUM PRODUCTS. (HIGH TEMPERATURE METHOD)
- UNE-EN 60068-3-2:2000 ENVIRONMENTAL TESTING. PART 3: BACKGROUND INFORMATION. SECTION 2: COMBINED TEMPERATURE/LOW AIR PRESSURE TESTS
- UNE 7322:1975 NON-INTERRUPTED CREEP TESTING OF STEEL AT ELEVATED TEMPERATURES.
GOSTR, High and low temperature test High and low temperature test
- GOST 12.4.317-2019 Occupational safety standards system. Personal fall protection equipment. General requirements for testing of products intended for use at low or high air temperatures
International Electrotechnical Commission (IEC), High and low temperature test High and low temperature test
- IEC 60068-2-39:2015 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
- IEC 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
US-TIA_EIA, High and low temperature test High and low temperature test
- TIA_EIA-455-69A-1991 FOTP-69 Test Procedure for Evaluating the Effect of Minimum and Maximum Exposure Temperatures on the Optical Performance of Optical Fibers
VN-TCVN, High and low temperature test High and low temperature test
- TCVN 3939-1984 Metals.Method for testing the impact strength at low temperature
European Committee for Standardization (CEN), High and low temperature test High and low temperature test
- EN ISO 10619-3:2011 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011)
- EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)
- EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
- EN 14187-7:2003 Cold applied joint sealants - Part 7: Test method for the determination of the resistance to flame
- EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature
Danish Standards Foundation, High and low temperature test High and low temperature test
- DS/EN ISO 10619-3:2012 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures
- DS/EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
- DS/ISO 2921:1979 Vulcanized rubber. Determination of low temperature characteristics. Temperature-retraction procedure (TR test)
- DS/ISO 1432:1984 Rubber, vulcanized. Low temperature stiffening (Gehman test). Determination
- DS/EN 61180-2:2012 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
- DS/EN 60068-3-1:2012 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
- DS/EN 60068-3-2:2001 Environmental testing - Part 3: Background information - Section 2: Combined temperature/low air pressure tests
HU-MSZT, High and low temperature test High and low temperature test
ZA-SANS, High and low temperature test High and low temperature test
- SANS 10815:2003 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures
- SANS 11432:2003 Rubber, vulcanized or thermoplastic - Determination of low temperature stiffening (Gehman test)
未注明发布机构, High and low temperature test High and low temperature test
- BS ISO 13930:2015(2018) Iron ores for blast furnace feedstocks — Determination of low - temperature reduction - disintegration indices by dynamic method
- DIN EN ISO 15027-3:2002 Protective clothing against hypothermia in water – Part 3: Test methods
Professional Standard - Petroleum, High and low temperature test High and low temperature test
- SY/T 7074-2016 Calibration method of HTHP drilling fluid filter press
- SY 7074-2016 Calibration method of high temperature and high pressure fluid loss tester for drilling fluid
Shaanxi Provincial Standard of the People's Republic of China, High and low temperature test High and low temperature test
- DB61/T 1276-2019 Test method for acid dew point of boiler low temperature corrosion flue gas
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, High and low temperature test High and low temperature test
WRC - Welding Research Council, High and low temperature test High and low temperature test
- BULLETIN 391-1994 ELEVATED TEMPERATURE TESTING OF GASKETS FOR BOLTED FLANGED CONNECTIONS
- BULLETIN 339-1988 DEVELOPMENT OF TIGHTNESS TEST PROCEDURES FOR GASKETS IN ELEVATED TEMPERATURE SERVICE
American Welding Society (AWS), High and low temperature test High and low temperature test
- WRC 391:1994 Elevated Temperature Testing of Gaskets for Bolted Flanged Connections
Professional Standard - Post and Telecommunication, High and low temperature test High and low temperature test
- YD/T 647-1994 Quality grading criteria of HF and LF noise testers
Canadian General Standards Board （CGSB), High and low temperature test High and low temperature test
European Committee for Electrotechnical Standardization（CENELEC）, High and low temperature test High and low temperature test
- EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
- EN 60068-3-1:2011 Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests
- EN IEC 62984-2:2020 High-temperature secondary batteries - Part 2: Safety requirements and tests
American Society of Mechanical Engineers (ASME), High and low temperature test High and low temperature test
- ASME STP-PT-028-2009 IMPACT TESTING EXEMPTION CURVES FOR LOW TEMPERATURE OPERATION OF PRESSURE PIPING
CENELEC - European Committee for Electrotechnical Standardization, High and low temperature test High and low temperature test
- EN 60068-3-1:1999 Environmental Testing Part 3: Background Information Section 1: Cold and Dry Heat Tests
AIA/NAS - Aerospace Industries Association of America Inc., High and low temperature test High and low temperature test
- NASM1312-28-1997 Fastener Test Methods; Method 28@ Elevated Temperature Double Shear
- NASM1312-18-1997 Fastener Test Methods; Method 18 Elevated Temperature Tensile Strength
Aerospace Industries Association/ANSI Aerospace Standards, High and low temperature test High and low temperature test
IEC - International Electrotechnical Commission, High and low temperature test High and low temperature test
- PAS 62177-2000 Highly-Accelerated Temperature and Humidity Stress Test (HAST) (Edition 1.0)
Jilin Provincial Standard of the People's Republic of China, High and low temperature test High and low temperature test
- DB22/T 2409-2015 Test method for high temperature resistance of polyimide fiber
- DB22/T 3410-2022 Low-temperature performance requirements and test methods for traction batteries for pure electric vehicles in alpine regions
国家质量监督检验检疫总局, High and low temperature test High and low temperature test
- SN/T 2816-2011 Test method for total migration of polymeric materials for exported food contact materials at low temperatures
US-FCR, High and low temperature test High and low temperature test
- FCR NE-F-3-39T-1971 TESTING OF HIGH TEMPERATURE CABLE FOR NUCLEAR DETECTORS (INACTIVE FOR NEW DESIGN)
BR-ABNT, High and low temperature test High and low temperature test
Aerospace Industries Association, High and low temperature test High and low temperature test