ZH
RU
ES

Enthalpy of curing

Enthalpy of curing, Total:226 items.

In the international standard classification, Enthalpy of curing involves: Plastics, Testing of metals, Thermodynamics and temperature measurements, Ground service and maintenance equipment, Medical equipment, Lubricants, industrial oils and related products, Solar energy engineering, Fluid storage devices, Dentistry, Raw materials for rubber and plastics, Materials for aerospace construction, Rubber and plastics products, Metrology and measurement in general, Pipeline components and pipelines, Adhesives, Organic chemicals, Materials for the reinforcement of composites, Paints and varnishes, Reinforced plastics, Printed circuits and boards, Ceramics, Materials and articles in contact with foodstuffs, Rubber, Packaging materials and accessories.

British Standards Institution (BSI), Enthalpy of curing

BS EN ISO 11357-3:2013 Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
22/30397422 DC BS ISO 24087. Vulcanized rubbers. Differential scanning calorimetry (DSC). Determination of the glass transition temperature and enthalpy
BS EN ISO 11357-3:2018 Tracked Changes. Plastics. Differential scanning calorimetry (DSC). Determination of temperature and enthalpy of melting and crystallization
BS ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS ISO 11357-5:2001 Plastics - Differential scanning calorimetry (DSC) - Determination of characteristic reaction-curve temperatures and times, enthalphy of reaction and degree of conversion
BS ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS EN ISO 11357-5:2014 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
BS EN ISO 12114:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics
BS ISO 4216:2021 Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
BS ISO 23794:2002 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
BS EN 12032:1997 Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes during curing
BS EN 12033:1997 Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes after curing

Association Francaise de Normalisation, Enthalpy of curing

NF T51-507-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: determination of temperature and enthalpy of melting and crystallization
NF T51-507-3*NF EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3 : determination of temperature and enthalpy of melting and crystallization
NF T51-507-5*NF EN ISO 11357-5:2014 Plastics - Differential scanning calorimetry (DSC) - Part 5 : determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
NF EN ISO 11357-5:2014 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 5 : détermination des températures et temps caractéristiques de la courbe de réaction, de l'enthalpie de réaction et du degré de transformation
NF X41-047*NF EN 12033:1996 Self adhesive tapes. Measurement of bonding of thermosetting adhesive tapes after curing.
NF T30-501:1976 Thermo-setting powder paints. Determination of fluidization.
NF C26-245:1990 Test procedure for thermal indurance of insulating varnishes. Electric strength method.
NF X41-046*NF EN 12032:1996 Self adhesive tapes. Measurement of bonding of thermosetting adhesive tapes during curing.
NF T43-020:2010 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance.

ESDU - Engineering Sciences Data Unit, Enthalpy of curing

ESDU 85024 A-2003 Heat capacity and enthalpy of liquids: organic sulphur compounds (thiols and sulphides).

Natural Gas Processor's Association (NGPA), Enthalpy of curing

GPA RR-83-1985 Excess Enthalpy Experimental Data Binary Systems: Water + Carbon Monoxide Water + Carbon Dioxide
GPA RR-37-1979 Enthalpy Measurements on Synthetic Gas Systems: Hydrogen-Methane Hydrogen-Carbon Monoxide
GPA RR-12-1975 Enthalpy and Phase Boundry Measurements on Carbon Dioxide and Mixtures of Carbon Dioxide with Methane, Ethane, and Hydrogen Sulfide

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Enthalpy of curing

ASHRAE HI-02-14-2-2002 An Analytical Optimization Tool for Hydronic Heating and Cooling with Low-Enthalpy Energy Resources

工业和信息化部, Enthalpy of curing

YS/T 1257-2018 Differential scanning calorimetry for melting and crystallization enthalpy tests of non-ferrous metal materials
HG/T 5247-2017 One-component heat-curing epoxy structural adhesive

American Society for Testing and Materials (ASTM), Enthalpy of curing

ASTM D3418-12e1 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D3418-12 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM E793-06 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM E793-01 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
ASTM D3418-21 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D2566-86 Test Method for Linear Shrinkage of Cured Thermosetting Casting Resins During Cure
ASTM D4640-86(1996) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D5028-96(2003) Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5028-17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5948-05e1 Standard Specification for Molding Compounds, Thermosetting
ASTM D5948-05 Standard Specification for Molding Compounds, Thermosetting
ASTM D5948-05(2012) Standard Specification for Molding Compounds, Thermosetting
ASTM D5948-05(2020) Standard Specification for Molding Compounds, Thermosetting
ASTM D5813-04(2018) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D1201-99(2004) Standard Specification for Thermosetting Polyester Molding Compounds
ASTM D1201-99 Standard Specification for Thermosetting Polyester Molding Compounds
ASTM D1201-99(2012) Standard Specification for Thermosetting Polyester Molding Compounds
ASTM D1201-13 Standard Specification for Thermosetting Polyester Molding Compounds
ASTM D1201-13(2022)e1 Standard Specification for Thermosetting Polyester Molding Compounds
ASTM D5813-04 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D5813-04(2008) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D5813-04(2012) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D4640-86(2022) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D6944-03 Standard Test Method for Resistance of Cured Coatings to Thermal Cycling
ASTM D4640-86(2009) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D4640-86(2001) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins
ASTM D4640-86(2017) Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins

American National Standards Institute （ANSI), Enthalpy of curing

BS ISO 24087:2023 Rubber, vulcanized. Determination of the glass transition temperature and enthalpy by differential scanning calorimetry (British Standard)
ANSI/ASTM D1201:1999 Specification for Thermosetting Polyester Molding Compounds
ANSI/ASTM D5813:2004 Specification for Cured-in-place Thermosetting Resin Sewer Piping Systems
ANSI/ASTM D3795:2000 Test Method for Thermal Flow and Cure Properties of Thermosetting Plastics by Torque Rheometer (15.04)
ANSI/ASTM D1896:1999 Transfer Molding Specimens of Thermosetting Compounds, Practice for (08.02)

Society of Automotive Engineers (SAE), Enthalpy of curing

SAE ARP5144-2000 Heat Application for Thermosetting Resin Curing
SAE ARP5144-2011 Heat Application for Thermosetting Resin Curing
SAE AS5528D-2020 Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting
SAE AS5528E-2020 Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting
SAE AS5528F-2023 Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting
SAE AMS3731/9-1981 POTTING COMPOUND, EPOXY Flexible, Thermal Shock Resistant, Heat Cure
SAE AMS3731/9A-1987 POTTING COMPOUND, EPOXY Flexible, Thermal Shock Resistant, Heat Cure
SAE AS5272D-2011 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification
SAE AS5272-2001 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification
SAE AMS3732-2011 POTTING COMPOUND, EPOXY One Part, Filled, Heat Cure, Low CTE
SAE AS5272E-2011 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification
SAE AS5272E-2016 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification
SAE AS5272F-2021 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification
SAE AS5272-1997 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting Procurement Specification R(2001)
SAE AMS5355H-2006 Steel, Corrosion Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
SAE AMS5355E-1944 STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
SAE AMS5355J-2022 Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
SAE AMS3731/2-1981 POTTING COMPOUND, EPOXY Bisphenol A-Type Filled, Heat Cure, Low CTE Thermal Shock Resistant
SAE AMS3731/2B-1991 POTTING COMPOUND, EPOXY Bisphenol A-Type Filled, Heat Cure, Low CTE Thermal Shock Resistant
SAE AMS3731/2A-1986 POTTING COMPOUND, EPOXY Bisphenol A-Type Filled, Heat Cure, Low CTE Thermal Shock Resistant
SAE AMS3731/9B-1993 (Noncurrent)Potting Compound, Epoxy Flexible, Thermal Shock Resistant, Heat Cure
SAE AMS3090A-1993 Lubricant, Dry Film, Heat Cured, for Fasteners Polysulfide Sealant Compatible
SAE AMS3090B-2011 Lubricant, Dry Film, Heat Cured, For Fasteners Polysulfide Sealant Compatible
SAE AMS3732A-1993 (Noncurrent)Potting Compound, Epoxy One Part, Filled, Heat Cure, Low CTE
SAE AMS3731/6A-2011 POTTING COMPOUND, EPOXY Bisphenol A-Type Syntactic Foam, Heat Cure
SAE AMS3731/8-1981 POTTING COMPOUND, EPOXY Bisphenol A-Type Filled, Heat Cure, High HDT
SAE AMS3731/6-1981 POTTING COMPOUND, EPOXY Bisphenol A-Type Syntactic Foam, Heat Cure
SAE AMS3731/8A-1991 POTTING COMPOUND, EPOXY Bisphenol A-Type Filled, Heat Cure, High HDT
SAE AMS3731/2C-1993 (Noncurrent)Potting Compound, Epoxy Bisphenol A-Type Filled, Heat Cure, Low CTE Thermal Shock Resistant
SAE AMS5568F-2006 Steel, Corrosion and Heat Resistant, Welded Tubing 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation-Hardenable
SAE AMS5568J-2023 Steel, Corrosion- and Heat-Resistant, Welded Tubing 17Cr - 7.1Ni - 1.1Al Solution Heat Treated, Precipitation-Hardenable
SAE AMS3090-1987 LUBRICANT, DRY FILM, HEAT CURED, FOR FASTENERS Compatible With Polysulfide Sealants

SAE - SAE International, Enthalpy of curing

SAE ARP5144A-2017 Heat Application for Thermosetting Resin Curing
SAE AMS3731/9C-2016 Potting Compound@ Epoxy Flexible@ Thermal Shock Resistant@ Heat Cure
SAE AS5528B-2014 Lubricant Application@ Solid Film@ Heat Cured@ Corrosion Inhibiting
SAE AS5528-2005 Lubricant Application@ Solid Film@ Heat Cured@ Corrosion Inhibiting
SAE AS5528C-2016 Lubricant Application@ Solid Film@ Heat Cured@ Corrosion Inhibiting
SAE AS5528A-2009 Lubricant Application@ Solid Film@ Heat Cured@ Corrosion Inhibiting
SAE AS5272B-2007 Lubricant@ Solid Film@ Heat Cured@ Corrosion Inhibiting Procurement Specification
SAE AS5272C-2007 Lubricant@ Solid Film@ Heat Cured@ Corrosion Inhibiting Procurement Specification
SAE AMS3731/2D-2016 Potting Compound@ Epoxy Bisphenol A-Type Filled@ Heat Cure@ Low CTE Thermal Shock Resistant
SAE AMS3731/6C-2016 Potting Compound@ Epoxy Bisphenol A-Type Syntactic Foam@ Heat Cure
SAE AMS3731/8C-2016 Potting Compound@ Epoxy Bisphenol A-Type Filled@ Heat Cure@ High HDT

IPC - Association Connecting Electronics Industries, Enthalpy of curing

IPC TM-650 2.3.23B-1988 Cure (Permanency) Thermally Cured Solder Masks

Korean Agency for Technology and Standards (KATS), Enthalpy of curing

KS M ISO 11357-3:2013 Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
KS M ISO 11357-3:2003 Plastics -Differential scanning calorimetry (DSC) -Part 3:Determination of temperature and enthalpy of melting and crystallization
KS M ISO 11357-5:2007 Plastics-Differential scanning calorimetry(DSC)-Part 5:Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11357-5:2015 Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS M ISO 11357-5-2015(2020) Plastics－Differential scanning calorimetry(DSC)－Part 5：Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
KS P 7117-2011 Dentistry－Dental heat curing acrylic resin for crown
KS M ISO 12114-2002(2020) Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of cure characteristics
KS M 3550-9-2016 Cured-in-place thermosetting resin tube for renovation of sewer piping system
KS M ISO 12114:2002 Fibre－reinforced plastics－Thermosetting moulding compounds and prepregs－Determination of cure characteristics
KS M 3550-9-2016(2021) Cured-in-place thermosetting resin tube for renovation of sewer piping system
KS P 7117-2017 Dentistry－Dental heat curing acrylic resin for crown
KS M 3550-7-2019 Cured-in-place thermosetting resin tube for renovation of potable water piping system
KS M ISO 23794:2012 Rubber, vulcanized or thermoplastic-Abrasion testing-Guidance
KS M ISO 23794:2017 Rubber, vulcanized or thermoplastic－Abrasion testing－Guidance

European Committee for Standardization (CEN), Enthalpy of curing

EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
EN ISO 12114:1997 Fibre-Reinforced Plastics - Thermosetting Moulding Compounds and Prepregs - Determination of Cure Characteristics ISO 12114: 1997
EN 12033:1996 Self adhesive tapes - Measurement of bonding of thermosetting adhesive tapes after curing

International Organization for Standardization (ISO), Enthalpy of curing

ISO 11357-3:2011 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-3:1999 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-3:1999/Amd 1:2005 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization; Amendment 1
ISO 11357-5:1999 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO 23794:2010 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
ISO 23794:2003 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance
ISO 23794:2023 Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance
ISO 23794:2015 "Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance"

Professional Standard - Medicine, Enthalpy of curing

YY/T 0815-2010 Standard test method for measurement of enthalpy of fusion, percent crystallinity ，and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry

Danish Standards Foundation, Enthalpy of curing

DS/EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization
DS/EN 12033:1997 Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes after curing
DS/EN 12032:1997 Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes during curing
DS/EN ISO 12114:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics

General Motors Corporation (GM), Enthalpy of curing

GM 9985682-1997 Resin, Impregnation, Heat-Cured Revision C
GM 9985734-1997 Resin, Impregnation, Heat-Cured Revision C
GM 9985791-1997 Resin, Impregnation, Heat-Cured Revision A
GM 9985511-1989 Rubber, Heat Cured Liquid Silicone
GM 9984805-2005 UV/Thermal Dual Cure Primer For Plastic Substrates

AENOR, Enthalpy of curing

UNE-EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011)
UNE-EN 12033:1996 SELF ADHESIVE TAPES. MEASUREMENT OF BONDING OF THERMOSETTING ADHESIVE TAPES AFTER CURING.
UNE-EN ISO 11357-5:2015 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013)
UNE-EN 12032:1996 SELF ADHESIVE TAPES. MEASUREMENT OF BONDING OF THERMOSETTING ADHESIVE TAPES DURING CURING.

German Institute for Standardization, Enthalpy of curing

DIN EN ISO 11357-3:2018 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2018)
DIN EN ISO 11357-5:2014-07 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013); German version EN ISO 11357-5:2014
DIN EN 12033:1996-07 Self adhesive tapes - Measurement of bonding of thermosetting adhesive tapes after curing; German version EN 12033:1996
DIN EN ISO 11357-3:2013 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011); German version EN ISO 11357-3:2013
DIN EN ISO 12114:1997 Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997); German version EN ISO 12114:1997
DIN EN 12032:1996-07 Self adhesive tapes - Measurement of bonding of thermosetting adhesive tapes during curing; German version EN 12032:1996

GM North America, Enthalpy of curing

GM GM9085P-1988 Test for Heat Curing Sealer
GM 9982059-1997 Additive for Heat Curing Adhesive Replaced by GM3601M
GM 9982226-1993 Adhesive, Heat Curing, Extruded Replaced by 9981691
GM 9982191-1994 Adhesive Heat Curing PVC to Aluminum Injection Molded
GM 9982058-1997 Adhesive Heat Cure, P.V.C. to Glass Replaced by GM3601M
GM 9985638-2015 Adhesive, Hot Melt, Urethane, Moisture Cure (Issue 3)

U.S. Military Regulations and Norms, Enthalpy of curing

ARMY QPL-46010-18 NOTICE 1-2007 LUBRICANT, SOLID FILM: HEAT CURED, CORROSION INHIBITING
ARMY QPL-46010-18-2007 LUBRICANT, SOLID FILM: HEAT CURED, CORROSION INHIBITING
ARMY QPL-46010-2012 Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738
ARMY QPL-46010-QPD-2010 LUBRICANT, SOLID FILM: HEAT CURED, CORROSION INHIBITING NATO CODE - S - 1738
ARMY MIL-PRF-46010 H-2013 LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE - S-1738
ARMY MIL-P-43037-1961 PLASTIC RODS, LAMINATED, THERMOSETTING, NYLON FABRIC BASE, PHENOLIC RESIN

Professional Standard - Aviation, Enthalpy of curing

HB 6688-1992 Heat curing molybdenum disulfide dry film lubricant

(U.S.) Ford Automotive Standards, Enthalpy of curing

FORD S-M4G4610-A-1994 SEALER, HEAT CURING - SOLVENT-TYPE
FORD ESK-M2G305-A2-1991 ADHESIVE, HOT MELT, POLYURETHANE - MOISTURE CURING
FORD FLTM EU-BV 052-11-2000 SEALING ABILITY OF CURED THERMO-ELECTRIC SEALING STRIP
FORD SK-M4G9506-A-1994 SEALING STRIP, EXPANDING SPOT WELDABLE, HEAT CURING
FORD SK-M4G9508-A-1996 SEALER, WELDABLE, HEAT CURING, BUTYL RUBBER
FORD WSS-M4G362-A-1998 SEALER/TAPE, DUAL LAYER, HEAT CURING, PAINTABLE
FORD ESK-M2G307-A2-1987 ADHESIVE, POLYURETHANE - METAL TO METAL - HEAT CURING - HOT APPLICABLE
FORD ESB-M4G101-B-1978 SEALER, LOW TEMPERATURE HEAT CURING SYNTHETIC RESIN BASE - THUMBABLE
FORD ESK-M2G292-A-1994 ADHESIVE, EPOXY FILM - HEAT CURING - CLINCH FLANGE
FORD ESB-M4G304-A-1988 SEALER, RUBBER BASED, HOT MELT EXTRUDED, HEAT CURING, MEDIUM FLOW, NON TACK
FORD ESK-M2G287-A1-1994 ADHESIVE, EPOXY - HEAT CURING, EXCEPTION IN SOLIDS (PARA 3.1.3): MIN. 97,0 %
FORD ESB-M4G70-A-1978 SEALER, POLYVINYL CHLORIDE FOAM PLASTISOL - HEAT CURING
FORD ESB-M4G279-A-1994 SEALER, DIE CUT, POLYOLEFIN, HEAT CURING BONDABLE PATCH
FORD ESB-M4G300-A-2000 SEALER, INJECTION MOLDED POLYOLEFIN - HEAT EXPANDING - HIGH TEMPERATURE CURE
FORD ESF-M2G331-A-1995 ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL
FORD ESK-M4G292-A-1994 SEALER, BUTYL RUBBER - PROFILED - SPOT WELDABLE - HEAT CURING
FORD M99G169-A-2000 MASK PEELABLE - VINYL BASED, LIQUID APPLIED, HEAT CURING
FORD WSK-M4G70-C-1990 SEALER, POLYVINYL CHLORIDE FOAM, PLASTISOL, HEAT CURING

Professional Standard - Military and Civilian Products, Enthalpy of curing

WJ 2191-1994 Specification for anticorrosion heat-curing solid film lubricants

CZ-CSN, Enthalpy of curing

CSN ON 69 6110-1967
CSN 64 0341-1990 Plastics. Termosetting casting resins. etermination of temperature increa- e of epoxy resins during curing
CSN 69 6110-1973 Chemical equipment. Tubular heat ex- changers with fixed tubesheets

RU-GOST R, Enthalpy of curing

GOST R 56755-2015 Plastics. Differential scanning calorimetry (DSC). Part 5. Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
GOST R 8.872-2014 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring specific enthalpy and specific heat-conguction of solid frames in the range of temperature from 700 to 1800 K
GOST R 56345-2015 Organic chemical products. Determination of solidification point by thermistor
GOST R 57694-2017 Polymer composites. Method for determination of curing characteristics of thermosetting resins

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Enthalpy of curing

GB/T 19466.5-2022 Plastics—Differential scanning calorimetry (DSC)—Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
GB/T 5472-1985 Test method for rectangular flow cure properties of thermosetting moulding compounds
GB/T 36532-2018 Fibre-reinforced plastics.Thermosetting moulding compounds and prepregs.Determination of cure characteristics

Group Standards of the People's Republic of China, Enthalpy of curing

T/CRES 0009-2022 Testing method of thermochemical energy storage temperature and energy density for solid compounds
T/ZZB 1982-2020 Autoclave for curing composite materials
T/CFA 0202014-2021 Hardener for thermosetting phenolic resin used for foundry sand mold (core) of binder jetting process

RO-ASRO, Enthalpy of curing

STAS 12593/1-1987 HOT CURING FURANIC RESIN FOR ABRASIVES
STAS 12593/2-1987 HARDENING AGENT FOR HOT CURING FURANIC RESIN FOR ABRASIVES

United States Navy, Enthalpy of curing

NAVY MIL-R-23461 A-1987 RESIN COMPOUND, THERMOSETTING, ROOM TEMPERATURE CURING, FOR METAL COATING
NAVY MIL-DTL-82633 A-2011 COMPOUND, POLYMERIC ELASTOMER, THERMOSETTING
NAVY MIL-I-24768 (2)-1992 INSULATION, PLASTICS, LAMINATED, THERMOSETTING; GENERAL SPECIFICATION FOR
NAVY MIL-I-24768 SUPP 1-1992 INSULATION, PLASTICS, LAMINATED, THERMOSETTING; GENERAL SPECIFICATION FOR
NAVY MIL-I-24768-1992 INSULATION, PLASTICS, LAMINATED, THERMOSETTING; GENERAL SPECIFICATION FOR
NAVY MIL-I-24178 VALID NOTICE 1-1988 INSULATION TAPE, ELECTRICAL, SEMI-CURED THERMOSETTING RESIN TREATED GLASS, ARMATURE BANDING, NAVAL SHIPBOARD
NAVY MIL-I-24178-1966 INSULATION TAPE, ELECTRICAL, SEMI-CURED THERMOSETTING RESIN TREATED GLASS, ARMATURE BANDING, NAVAL SHIPBOARD

GM Holden Ltd, Enthalpy of curing

HOLDEN HN 0002-1967 Breakaway Characteristics of Heat Cured Sealers

International Truck and Engine Corporation (ITEC), Enthalpy of curing

INTERN TMS 6915-2009 Heat Curing Sealant, Body Cabs

International Federation of Trucks and Engines, Enthalpy of curing

NAVISTAR MPAPS K-6915-2015 Heat Curing Sealant, Body Cabs
NAVISTAR MPAPS K-6915-2021 Heat Curing Sealant, Body Cabs
NAVISTAR TMS 6915-2015 VOID - Heat Curing Sealant, Body Cabs

Professional Standard - Chemical Industry, Enthalpy of curing

HG/T 3865-2006 Test method for rectangular flow cure properties of thermosetting moulding compounds

HU-MSZT, Enthalpy of curing

MSZ 19357/4-1981

Lithuanian Standards Office , Enthalpy of curing

LST EN 12033-2000 Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes after curing
LST EN 12032-2000 Self-adhesive tapes - Measurement of bonding of thermosetting adhesive tapes during curing

SE-SIS, Enthalpy of curing

SIS SS 16 67 11-1979 Thermoset polyester moulding compounds

American Water Works Association (AWWA), Enthalpy of curing

AWWA D120-2002 Thermosetting Fiberglass-Reinforced Plastic Tanks

IT-UNI, Enthalpy of curing

UNI 7635-1976

FI-SFS, Enthalpy of curing

SFS-ISO 2577 E:1986 This standard is approved in English

Professional Standard - Construction Industry, Enthalpy of curing

JG/T 260-2009 High-pressure laminates-sheets based on thermosetting resins for curtain wall

国家市场监督管理总局、中国国家标准化管理委员会, Enthalpy of curing

GB/T 39549-2020 Fiber reinforced thermosetting composites septic tank

Professional Standard - Electron, Enthalpy of curing

SJ/T 11742-2019 Thermal conductive semi-solidifying sheets of non-prepreg for printed circuits

Professional Standard - Building Materials, Enthalpy of curing

JC/T 2212-2014 Solid-state pressureless sintered silicon carbide ceramic heat exchanger tubes
JC 586-1995 Thermosetting fiberglass reinforced plastic food container

Indonesia Standards, Enthalpy of curing

SNI 06-4889-1998 Determination of fixed compression of vulcanized rubber or thermoplastic rubber

American Society of Mechanical Engineers (ASME), Enthalpy of curing

ASME B73.5M-1995(R2007) Thermoplastic/Thermoset Polymer Material Horizontal EndSuction Centrifugal Pumps Chemical Process