ZH
RU
ES

Hole standard diameter

Hole standard diameter, Total:499 items.

In the international standard classification, Hole standard diameter involves: Standardization. General rules, Fasteners, Cutting tools, Valves, Ceramics, Analytical chemistry, Special measuring equipment for use in telecommunications, Screw threads, Measurement of time, velocity, acceleration, angular velocity, Structure and structure elements, Mining equipment, Machine tool systems, Fluid power systems, Electromechanical components for electronic and telecommunications equipment, Woodworking equipment, Dentistry, Fasteners for aerospace construction, Particle size analysis. Sieving, Galvanic cells and batteries, Heat recovery. Thermal insulation, Sports equipment and facilities, Electronic component assemblies, Aerospace fluid systems and components, Pipeline components and pipelines, Textile fibres, Earthworks. Excavations. Foundation construction. Underground works, Tobacco, tobacco products and related equipment, Ground service and maintenance equipment, Aircraft and space vehicles in general, Linear and angular measurements, Electrical wires and cables, Components for aerospace construction, Machine tools, Materials for aerospace construction, Products of the textile industry, Powder metallurgy, Road engineering, Telecommunication terminal equipment, Resistors, Capacitors, Non-destructive testing, Tyres, Vacuum technology, Aerospace electric equipment and systems, Chipless working equipment, Bottles. Pots. Jars, Bearings, Burners. Boilers, On-board equipment and instruments, Shipbuilding and marine structures in general, Gears, Equipment for processing of minerals.

SE-SIS, Hole standard diameter

SIS SMS 1523-1950
SIS SMS 1724-1965
SIS SMS 1486-1950
SIS SMS 1338-1950
SIS SMS 1488-1950
SIS SMS 982-1970 Wood-working machines. Spindle diameters for machines ivith bored tools
SIS SS-ISO 1307:1990 Rubber and plastics hoses — Bore diameters and tolerances on length
SIS SMS 1344-1950
SIS SMS 1487-1950
SIS SMS 1346-1950
SIS SMS 1341-1950
SIS SMS 1356-1950
SIS SMS 1345-1950
SIS SMS 1337-1950
SIS SMS 1489-1950
SIS SMS 1340-1950
SIS SMS 1355-1950
SIS SMS 1343-1950
SIS SS 2173-1988 Diameters of spot facings, counterbores and countersinks - MScrews and nuts with ISO metric screw threads and tapping screws
SIS SMS 1339-1950
SIS SMS 1342-1950
SIS SMS 1491-1950
SIS SMS 1347-1950
SIS SMS 1492-1950
SIS SMS 1493-1950
SIS SMS 1357-1950
SIS SMS 1363-1950
SIS SS-ISO 3320:1990 Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series

Taiwan Provincial Standard of the People's Republic of China, Hole standard diameter

CNS 2-1944 Standard Diameter
CNS 211-1953 Diameters of Drill Heads (for Drilling Bolt Holes)
CNS 4245-1978 Clearance Holes for Metric Bolts (1.6 up to and Including 150 mm Thread Diameter)
CNS 4949-1979 Tapping Screws, Applications and Core Holes
CNS 7338-1981 Countersunk Head Rivets, Nominal Diameters 10 to 36 mm
CNS 7337-1981 Round Head Rivets, Nominal Diameters 10 to 36 mm
CNS 7340-1981 Countersunk Head Rivets, Nominal Diameters 1 to 8 mm
CNS 7339-1981 Round Head Rivets Nominal Diameters 1 to 8 mm
CNS 7562-1981 Mushroom Head Rivets, Nominal Diameters 1.5 to 6 mm
CNS 7563-1981 Flat Round Head Rivets Nominal Diameters 1.4 to 6 mm
CNS 7567-1981 Semi - Tubular Pan Head Rivets Nominal Diameters 1.6 to 10 mm
CNS 4998-1979 Long Shank Machine Taps with Nominal Diameters from 3 to 24 mm

Korean Agency for Technology and Standards (KATS), Hole standard diameter

KS B ISO 273:2010 Diameter of clearance holes and counterbores for bolts and screws
KS B 2305-2006 Nominal size and bore of valves
KS F 7003-2016(2021) Standard test method for bi-directional pile load test of large-diameter drilled shafts
KS B ISO 273-2010(2020) Diameter of clearance holes and counterbores for bolts and screws
KS M ISO 7370:2004 Glass fibre reinforced thermosetting plastics(GRP) pipes and fittings－Nominal diameters, specified diameters and standard lengths
KS F 2493-2017(2022) Standard test method of binder run-off test for porous asphalt mixtures
KS M ISO 1307:2008 Rubber and plastics hoses－Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
KS B ISO 3320-2006(2011) Fluid power systems and components－Cylinder bores and piston rod diameters－Metric series
KS B 5259-2002 Standard straight rules
KS B 5259-2022 Standard straight rulers
KS B 5259-1987 Standard straight rulers
KS F 7003-2016 Standard test method for bi-directional pile load test of large-diameter drilled shafts

RU-GOST R, Hole standard diameter

GOST 21586-1976 Countersinks for machining holes diameters from 3 to 80 mm. Hole tolerance
GOST 19257-1973 Holes for threading metric thread. Diameters
GOST 21350-1975 Holes for threading pipe taper screw thread. Diameters
GOST 21348-1975 Holes for threading pipe cylindrical thread. Diameters
GOST 12813-1967 Aircraft and helicopter tank filling orifices. Diameters
GOST 28701-1990 Wood-cutting tool. Cutters. Diameters of tool mounting bore
GOST 30041-1993 Cigarettes en filters. Determination du diametre nominal. Methode pneumatique
GOST 24115-1980 Keyway depth gauges for holes with diameter from 3 to 10 mm. Design and dimensions
GOST 24116-1980 Keyway depth gauges for holes with diameter over 10 to 90 mm. Design and dimensions
GOST 24117-1980 Keyway depth gauges for holes with diameter over 90 to 200 mm. Design and dimensions
GOST 9523-1984 Shanks for tool. Diameters, squares and holes for driving squares. Dimensions
GOST 24733-1981 Single pole sockets and plugs with contact diameter 1,6 and 4,0 mm. Specifications
GOST 28044-1989 Internal broaches for straight splines based at internal diameter one pass combined type. Construction
GOST R 52912-2008 Nominal diameters of components of vacuum systems. Series
GOST 17573-1972 Multiball hard differential rollers by diameters from 40 to 300 mm for dimension-finishing of openings of machine components by pressere. Design and dimensions
GOST R 50035-1992 Combined broaches with diameter from 50 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 1,5 to 2,5 mm. Construction
GOST R 50037-1992 Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 3 to 4 mm. Construction
GOST R 50038-1992 Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside dimeter with modul from 3 to 5. Construction
GOST 28048-1989 Broaches with diameter from 50 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul frome 1,5 to 2,5 mm. Construction
GOST 28050-1989 Broaches with diameter from 55 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with modul from 3 to 5 mm. Construction
GOST 24822-1981 Broaches combined for 10-slitting holes with straightside profile and centring at outside diameter, alternatives. Design and dimension
GOST R 50036-1992 Combined broaches with diameter from 90 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 2,5 mm. Construction

Society of Automotive Engineers (SAE), Hole standard diameter

SAE RS-178-1-1943 RS178 Standard Diameters
SAE RS-200-1-1943 RS200 Standard Diameters of Jack Piston Rods
SAE AS5202A-2005 PORT OR FITTING END, INTERNAL STRAIGHT THREAD, DESIGN STANDARD FSC 4730; Supersedes SAE AS 33649A [Superseded: SAE AS 33649A, SAE AS 33649, SAE AS 33649]
SAE AS3125-2006 PLUG, EXPANSION - CRES, 416, LONG; STD AND .010 OVERSIZE DIAMETERS
SAE AS3127-2006 PLUG, EXPANSION - CRES, 416, SHORT; STD AND .010 OVERSIZE DIAMETERS
SAE AS3129-2006 PLUG, EXPANSION - CRES, 303, LONG; STD AND .010 OVERSIZE DIAMETERS
SAE AS3131-2006 PLUG, EXPANSION - CRES, 303, SHORT; STD AND .010 OVERSIZE DIAMETERS
SAE RS-199-1-1943 RS199 Standard Diameters of Shock Absorbers and Jack Cylinders
SAE AS152901-2005 STUD, STEPPED, DRILLED, 1.5 DIA ENGAGEMENT, .3125-18 X .250-28
SAE AS152601-2005 STUD, STEPPED, DRILLED, 1.5 DIA ENGAGEMENT, .250-20 X .190-32
SAE AS153201-2007 STUD, STEPPED, DRILLED, 1.5 DIA ENGAGEMENT, .375-16 x .3125-24
SAE AS152901 THRU AS153200-1999 Stud, Stepped, Drilled 1.5 Dia Engagement, .3125-18 X .250-28
SAE AS162501-2005 STUD, STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, .4375 X .375-24
SAE AGS2108-2-1960 AGS2108 Protective Plugs for Plain Bores. 5/8" to 2 1/2 " DIA
SAE AS1620-2012 STUD, LOCKED IN - RING, STRAIGHT, HOLE PREPARATION FOR
SAE AS3129-1981 Plug, Expansion - CRES, 303, Long, Standard and .010 Oversize Diameters
SAE AS3125-1981 Plug, Expansion - CRES, 416, Long, Standard and .010 Oversize Diameters
SAE AS3123-2006 PLUG, EXPANSION -ALUMINUM, 2024-T4, SHORT; STD AND .010 OVERSIZE DIAMETERS
SAE AS3121-2006 PLUG, EXPANSION -ALUMINUM, 2024-T4, LONG; STD AND .010 OVERSIZE DIAMETERS
SAE AS3131C-2019 PLUG, EXPANSION - CRES, 303, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS S30300
SAE AS162501 THRU AS162800-1999 Stud, Stepped, Drilled Necked, 2 Dia Engagement, .4375 X .375-24
SAE AS3131-1981 Plug, Expansion - CRES, 303, Short, Standard and .010 Oversize Diameters
SAE AS3129A-2009 Plug, Expansion - CRES, 303, Long, STD and .010 Oversize Diameters UNS S30300
SAE AS3121-1981 Plug, Expansion - Aluminum, 2024-T4, Long, Standard and .010 Oversize Diameters
SAE MA3393-1990 Clip - Spring, Tension, Outer 6.7 MM Bolt Hole, AMS 5525, Metric FSC 5340
SAE AS3081-1973 Insert - CRES Helical Coil Fine Thread, Straight Stud Locking, 2 Dia Nom Length FSC 5340
SAE AS3083-1973 Insert - CRES Helical Coil Fine Thread, Straight Stud Locking, 3 Dia Nom Length FSC 5340
SAE AS893D-2009 Fitting, Tee, Standard and Reducer, Flareless Tube to Pipe on Side, External Thread
SAE AS3125C-2019 PLUG, EXPANSION - CRES, 416 OR 416SE, LONG; STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623
SAE AS3127C-2019 PLUG, EXPANSION - CRES, 416 OR 416SE, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS S41600/UNS S41623
SAE AS1620-1981 Stud, Locked in - Ring, Straight, Hole Preparation for
SAE AS3121A-2008 Plug, Expansion - Aluminum, 2024-T4 and 2024-T351, Long, Std and .010 Oversize Diameters (UNS A92024)
SAE AS3123A-2014 PLUG, EXPANSION - ALUMINUM, 2024-T4 AND 2024-T351, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS A92024
SAE AS3123B-2019 PLUG, EXPANSION - ALUMINUM, 2024-T4 AND 2024-T351, SHORT; STD AND .010 OVERSIZE DIAMETERS, UNS A92024
SAE AS6098-2011 Fitting, Tee, Standard and Reducer, Bulkhead on Run, Internal on Side, Flared, 37° Spherical
SAE AS3123A-2009 Plug, Expansion - Aluminum, 2024-T4 and 2024-T31, Short, STD and .010 Oversize Diameters, UNS A92024
SAE AS3587A-2014 PIN AND PLUG, EXPANSION, SET OF PARTS, STD AND .010 OVERSIZE DIAMETERS, CRES 303, SHORT, UNS S30300
SAE AS3587B-2020 PIN AND PLUG, EXPANSION, SET OF PARTS, STD AND .010 OVERSIZE DIAMETERS, CRES 303, SHORT, UNS S30300

Professional Standard - Machinery, Hole standard diameter

JB/ZQ 4719-2006 Diameter of twist drill for drilling hole before inside whorl treatment or car (bore) hole diameter
JB/T 9987-1999 Diameter of the twist drill used before tapping

HU-MSZT, Hole standard diameter

IT-UNI, Hole standard diameter

CZ-CSN, Hole standard diameter

CSN 10 7015-1980 Vacuum technology. Bore diameters.
CSN ON 56 2714-1964
CSN 11 0150-1989 Circumferential diameters of pumps for drilled wells and their co-ordinati- on to rated inside diameters of wells
CSN 20 1505-1983 Metal-working machines. Tool hole diameters for cutting tools with cylindrical shank
CSN 25 4130-1964 Master gauges for thread calliper gauges. Metric thread M 3 to M 100
CSN 02 4650-1965 Tilting double-row ball bearings with bore diamoter d < 10
CSN 02 6204-1976 Shaft couplings for general use. Torque, bore diameters and hub lengths
CSN 13 0014-1977 Joints for pipelines and armatures Nominal diameters
CSN 25 4221-1962 Reference gauges for new ring thread go" gauges. Normal trapezoidal thread. iameter 10—100 mm
CSN 25 4190-1964 Master gauges for thread calliper gauges. Cylindrical pipe thread G 1/8" - G 3 1/2"
CSN 25 3284-1960 Disk reference gauges for diameters from 18 up to 80 mm
CSN 25 3285-1960 Flat reference gauges for diameters from 80 up to 315 mm
CSN 25 4210-1962 Cylindrical limit thread gauges, both- ided. Normal trapezoidal thread. Dia- eter from 10 to 32 mm.
CSN 25 4220-1962 Rilig limit thread "go" gauges. Normal rapezoidal thread. Diameter 10—100 mm
CSN 25 4226-1962 Reference gauges for ring thread "not o" gauges. Normal trapezoidal thread. iameter 10—100 mm
CSN 25 4211-1962 Cylindrical thread "go" gauges. rapezoidal normal thread, gDiameter 34—100 mm
CSN 25 4225-1962 Limit ring thread "not go" gauges. ormal trapezoidal thread. Diameter 0-100 mm
CSN 25 4224-1962 Measuring parts of reference gauges on earing for ring thread "go" gauges. ormal trapezoidal thread. Diameter 0-100 mm
CSN 25 4222-1962 Measuring parts of reference gauges for ew ring thread "go" gauges. Normal rapezoidal thread. Diameter 10—100 mm

North Atlantic Treaty Organization Standards Agency, Hole standard diameter

STANAG 3212-1998 DIAMETERS FOR GRAVITY FILLING ORIFICES

TIA - Telecommunications Industry Association, Hole standard diameter

EIA/TIA-455-167A-1992 FOTP-167 Mode Field Diameter@ Variable Aperture in the Far Field

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Hole standard diameter

GB/T 1967-1996 Test method for pore diameter of porous ceramic
GB/T 20330-2006 Drill diameter for use prior to tapping screw threads

国家市场监督管理总局、中国国家标准化管理委员会, Hole standard diameter

GB/T 38949-2020 Determination of pore size for porous membranes—Standard particle method

American National Standards Institute （ANSI), Hole standard diameter

ANSI/EIA/TIA 455-167A:1992 Mode Field Diameter Measurement - Variable Aperture Method in the Farfield
ANSI B93.3-1984 Cylinder Bore and Piston Rod Diameters - Inch Series
ANSI/ASME B16.47-2011 Large Diameter Steel Flanges - NPS 26 Through NPS 60 Metric/Inch Standard

Danish Standards Foundation, Hole standard diameter

DS 2389:1993 Centre holes 60 degree. Determination of dimensions
DS 2390:1993 Centre holes 90 degree. Determination fo dimensions
DS/EN ISO 2157:1996 Dental rotary instruments - Nominal diameters and designation code number

(U.S.) Ford Automotive Standards, Hole standard diameter

FORD ESH-M9H99-A2-1991 SCREEN, NYLON, MONOFILAMENT, 350 MICROMETRE MESH OPENING (Shown on ESH-M9H99-A1)
FORD ESH-M9H99-A3-1991 SCREEN, NYLON, MONOFILAMENT, 355 MICROMETRE MESH OPENING (Shown on ESH-M9H99-A1)
FORD ESH-M9H99-A4-1991 SCREEN, NYLON, MONOFILAMENT, 132 MICROMETRE MESH OPENING (Shown on ESH-M9H99-A1)
FORD ESE-M2D352-A-2004 TUBING, RUBBER - LARGE DIAMETER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D352-A-2009 TUBING, RUBBER - LARGE DIAMETER ***TO BE USED WITH FORD WSS-M99P1111-A***

TR-TSE, Hole standard diameter

TS 511-1967 Light Metal Rivets for Shipbuilding Nominal Diameters, Rivet Hole Diameters and Clearances

PL-PKN, Hole standard diameter

PN H74238-1993 Seamless steel tubing pipes of standard diameter
PN H74233-1993 Seamless steel casing of standard diameter
PN H74228-1974 Drill pipes Rotary drilling of standart diameter
PN M57025-1974 Holes in steel and cas? iron Diamefers of drills and reamers
PN G61027-1974 Rotary drilling Rotary tables Rotary tables buschings
PN G53045-1975 Wiercenia obrotowe normalno?rednicowe Sprawdzianu doci?gu gwintów rurowych przewodu wiertniczego
PN T80090-1991 Preferred diameters of wire terminations of capacitors and resistors
PN N84507-1991 Still cameras. Lens aperture markings
PN H75210-1957 Cast-iron drain traps for sinks without socket with 50 mm diameters
PN M69224-1960 Gas cylindres. Whitworth threads of 21,8 and 24,3 mm diameters
PN M46693-1972 Corweyors pneumatic ubes omina? diameters
PN P62008-1988 Textile machinery Knitting machines Nomina? diameters of circular machines

American Society for Testing and Materials (ASTM), Hole standard diameter

ASTM D3195-90(1998)e1 Standard Practice for Rotameter Calibration
ASTM D3195/D3195M-10(2015) Standard Practice for Rotameter Calibration
ASTM E2578-07 Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM C585-10(2016) Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
ASTM F1436-92(1997)e1 Standard Guide for Center Serving Diameter Dimensions for Archery Bow Strings
ASTM F1436-07 Standard Guide for Center Serving Diameter Dimensions for Archery Bow Strings
ASTM F1436-11(2017) Standard Guide for Center Serving Diameter Dimensions for Archery Bow Strings
ASTM E2578-07(2012) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM F1311-90(1995)e1 Standard Specification for Large-Diameter Fabricated Carbon Steel Flanges
ASTM F1311-90(2012) Standard Specification for Largendash;Diameter Fabricated Carbon Steel Flanges
ASTM F1311-90(2023) Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges
ASTM D6500-00(2012)e1 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
ASTM D4971-89(1998) Standard Test Method for Determining the In Situ Modulus of Deformation of Rock Using the Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM D6500-00(2006) Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
ASTM D6500-00 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser
ASTM D6466-10(2018) Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM F1436-02 Standard Guide for Center Serving Diameter Dimensions for Archery Bow Strings
ASTM F205-94(2015) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM F205-94(2020) Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM D7864/D7864M-15 Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
ASTM E128-99(2011) Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
ASTM D6466-10 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D2130-90(1995)e1 Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection
ASTM D7864/D7864M-15(2023) Standard Test Method for Determining the Aperture Stability Modulus of Geogrids
ASTM D6466-99(2005) Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D6466-99 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM D4971-16 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM F316-03(2019) Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
ASTM E2578-07(2018) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM E2578-07(2022) Standard Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
ASTM F205-94(2010)e1 Standard Test Method for Measuring Diameter of Fine Wire by Weighing
ASTM F1436-11 Standard Guide for Center Serving Diameter Dimensions for Archery Bow Strings
ASTM C1870-18 Standard Test Method for Determination of Impact Diameter from Falling Ball on Ceramic Tile
ASTM F679-00a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM F679-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM E803-91(2008) Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams
ASTM D8490-23a Standard Test Method for Determining the Pore Size Characteristics of Geotextiles Using an Optical Method
ASTM E128-99(2005) Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
ASTM E128-99(2019) Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
ASTM F894-05 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM E803-91(2002) Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams
ASTM F551-89(2000) Standard Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires
ASTM F894-07 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM A632-04 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
ASTM A632-98 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
ASTM A632-01 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
ASTM A632-02 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
ASTM A632-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
ASTM F894-06 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM A409/A409M-19 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-14 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A632-04(2009) Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
ASTM B258-18 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM E128-99 Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
ASTM F679-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM F894-19 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM B258-96 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM B258-01 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM B258-02 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM B258-02(2008) Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors
ASTM A409/A409M-01 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-95ae1 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM F679-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM F679-06 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM A409/A409M-01(2005) Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM F679-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM F679-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM F679-08 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM A409/A409M-08 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-08a Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM A409/A409M-09 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
ASTM B258-14 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors

German Institute for Standardization, Hole standard diameter

DIN 7952-2:1971-10 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 7952-2:1971 Sheet Metal Rim Holes with Screw Thread; Prepunch Hole Diameters
DIN 20311:2002 Drill tubes with diameters exceeding 100 mm for large hole boring in mining
DIN 2245-1:1989 GO and NOT GO plug gauges from 1 mm to 40 mm nominal diameter
DIN 20311:2002-11 Drill tubes with diameters exceeding 100 mm for large hole boring in mining
DIN 2245-2:1989 GO and NOT GO plug gauges over 40 mm up to 65 mm nominal diameter
DIN ISO 4783-2:1996 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 2: Preferred combinations for woven wire cloth; identical with ISO 4783-2:1989
DIN 7975:2016-04 Tapping screw connections - Guideline values for core hole diameters and use
DIN 7975:2016 Tapping screw connections - Guideline values for core hole diameters and use
DIN 7975:1989 Tapping screw connections; guideline values for core hole diameters and use
DIN 974-2:1991-05 Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions / Note: DIN 74-3 (1991-05) remains valid alongside this standard until 1996-04-30.
DIN 2246-2:2008 Geometrical product specifications (GPS) - "GO" plug gauges - Part 2: For holes over 120 mm up to 200 mm nominal diameter
DIN 2246-1:2008 Geometrical product specifications (GPS) - "GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 2245-1:2008 Geometrical product specifications (GPS) - Limit plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 2245-2:2008 Geometrical product specifications (GPS) - Limit plug gauges - Part 2: For holes over 40 mm up to 65 mm nominal diameter
DIN 2248-2:2008 Geometrical product specifications (GPS) - "GO" gauging members - Part 2: For holes over 40 mm up to 120 mm nominal diameter
DIN 2246-3:2008 Geometrical product specifications (GPS) - "GO" plug gauges - Part 3: For holes over 40 mm up to 120 mm nominal diameter
DIN 974-2:1991 Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
DIN 7500-2:1984 Thread rolling screws for ISO metric thread; guideline values for hole diameters
DIN 20314:1990 Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining
DIN 8606:1976 Machine Tools; Lathes of Normal Accuracy; Swing up to 800 mm; Acceptance Conditions
DIN ISO 4783-1:1996 Industrial wire screens and woven wire cloth - Guide to the choice of aperture size and wire diameter combinations - Part 1: Generalities; identical with ISO 4783-1:1989
DIN 2248-3:2008 Geometrical product specifications (GPS) - "GO" gauging members - Part 3: For holes over 120 mm up to 200 mm nominal diameter
DIN 2248-1:2000-01 Verification of geometrical parameters - "GO" gauging members - Part 1: For holes from 1 mm to 40 mmm nominal diameter
DIN 2247-1:2008 Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 2247-3:1989 NOT GO plug gauges with cylindrical gauging member over 40 mm up to 120 mm nominal diameter
DIN 2246-1:1989 GO plug gauges from 1 mm to 40 mm nominal diameter
DIN 2246-3:1989 GO plug gauges over 40 mm up to 120 mm nominal diameter
DIN 8607:1976 Machine Tools; Lathes of Normal Accuracy, Swing above 800 up to 1600 mm; Acceptance Conditions
DIN 2249-1:2000-01 Verification of geometrical parameters - "NOT GO" gauging members - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 20314:1990-06 Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining
DIN 2248-2:1989 GO gauging members over 40 mm up to 120 mm nominal diameter
DIN 674:2011-03 Flat round head rivets - Nominal diameters 1,4 mm to 6 mm
DIN 2247-1:1989 NOT GO plug gauges from 1 mm to 40 mm nominal diameter
DIN 2248-1:2000 Verification of geometrical parameters - "GO" gauging members - Part 1: For holes from 1 mm to 40 mmm nominal diameter
DIN EN 3149:1996 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard; German version EN 3149:1996
DIN 2246-2:1989 GO segmental cylindrical bar gauges over 120 mm up to 200 mm nominal diameter
DIN 2247-2:1989 NOT GO rod gauges over 40 mm up to 500 mm nominal diameter
DIN 302:2011 Countersunk head rivets - Nominal diameters 10 mm to 36 mm
DIN 28182:2007 Tubular heat exchangers - Tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 7500-2:2016 Thread rolling screws for ISO metric thread - Part 2: Guideline values for hole diameters
DIN 739:2011 Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with cylindrical bore
DIN 28182:1987 Tubular heat exchangers; tube pitches, diameter of bores in tube sheets, baffles and support plates
DIN 2249-2:2008 Geometrical product specifications (GPS) - "NOT GO" gauging members - Part 2: Rod gauge for holes over 40 mm up to 500 mm nominal diameter
DIN 2247-2:2008 Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 2: With rod gauge for holes over 40 mm up to 500 mm nominal diameter
DIN 2249-1:2000 Verification of geometrical parameters - "NOT GO" gauging members - Part 1: For holes from 1 mm up to 40 mm nominal diameter
DIN 2246-4:2008 Geometrical product specifications (GPS) - "GO" plug gauges - Part 4: For holes over 40 mm up to 250 mm nominal diameter for precision mechanics
DIN 6791:2012-05 Semi-tubular pan head rivets - Nominal diameters 1,6 mm to 10 mm
DIN 738:2011 Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with cylindrical bore
DIN 69051-2:1989-05 Machine tools; ball screws; nominal diameters and nominal leads
DIN 2246-3:2008-07 Geometrical product specifications (GPS) - "GO" plug gauges - Part 3: For holes over 40 mm up to 120 mm nominal diameter
DIN 2246-2:2008-07 Geometrical product specifications (GPS) - "GO" plug gauges - Part 2: For holes over 120 mm up to 200 mm nominal diameter
DIN 2248-4:2008 Geometrical product specifications (GPS) - "GO" gauging members - Part 4: For holes over 40 mm up to 250 mm nominal diameter for precision mechanics
DIN 2247-3:2008 Geometrical product specifications (GPS) - "NOT GO" plug gauges - Part 3: With cylindrical gauging member for holes over 40 mm up to 120 mm nominal diameter
DIN 2248-2:2008-07 Geometrical product specifications (GPS) - "GO" gauging members - Part 2: For holes over 40 mm up to 120 mm nominal diameter
DIN 2248-3:2008-07 Geometrical product specifications (GPS) - "GO" gauging members - Part 3: For holes over 120 mm up to 200 mm nominal diameter
DIN 2245-2:2008-07 Geometrical product specifications (GPS) - Limit plug gauges - Part 2: For holes over 40 mm up to 65 mm nominal diameter

Professional Standard - Aerospace, Hole standard diameter

QJ 2920-1997 Bottom hole diameter before MJ internal thread tapping
QJ 151-1974 Type and size of thread rolling wheel (inner hole diameter φ54mm)
QJ 400-1978 Countersinking of countersunk screw holes (screw diameter = M3~M10, ψ = 90°)
QJ 399-1978 Countersink rivet hole countersinking (rivet diameter = 2.5~6, ψ = 90°, 120°)
QJ 395-1978 Countersinking rivet holes countersinking (rivet diameter = 3~6, ψ = 90°, 120°)
QJ 1133.14-1987 Mechanical clamping turning tool pressure plate type 75° inner hole turning tool (tool diameter 25)
QJ 1133.15-1987 Mechanical clamping turning tool pressing plate type 90° inner hole turning tool (shank diameter 16)
QJ 1133.16-1987 Mechanical clamping turning tool pressure plate type 90° inner hole turning tool (tool diameter 25)
QJ 1133.13-1987 Mechanical clamping turning tool pressure plate type 75° inner hole turning tool (tool diameter 16)

AENOR, Hole standard diameter

UNE 25161:1963 SELECTIVE LIST OF THE HOLE DIAMETERS FOR STEEL RIVET SETTING (2-20 MM DIAMETERS).
UNE 25163:1963 SELECTIVE LIST OF THE DIAMETERS OF SCREWS CLEARANCE HOLES (4-24 MM).
UNE 68103:1997 EQUIPMENT FOR CROP PROTECTION. AGRICULTURAL SPRAYERS. TANK NOMINAL VOLUME AND FILLING HOLE DIAMETER.
UNE 101360:1986 FLUID POWER SYSTEMS AND COMPONENTS. CYLINDER BORES AND PISTON DIAMETERS
UNE 25192:1967 SELECTIVE LIST OF ARTICULATIONS. STANDARDIZED SERIES OF AXE DIAMETERS.
UNE 15439-2:1994 BALL SCREWS. PART 2: NOMINAL DIAMETERS AND NOMINAL LEADS.

NL-NEN, Hole standard diameter

NEN 2835-1971 Gauges - Plug gauges for holes, diameters 1 up to and including 40 mm
NEN 2810-1987 Gauges - Plug gauges for holes, diameters 1 up to and including 40 mm

NATO - North Atlantic Treaty Organization, Hole standard diameter

STANAG 3212-1988 Diameters for Gravity Filling Orifices (ED 5 AMD 2)

Association Francaise de Normalisation, Hole standard diameter

NF G32-302:1981 Habillement - Accessoires pour vêtements - Boutons à 2 ou 4 trous - Diamètres et entraxes des trous
NF G32-303:1981 Habillement - Accessoires pour vêtements - Boutons à queue - Diamètre et position du trou .
NF L22-090:1964 Standardized screws, pins and washers with increased diameter intended for repair work.
NF ISO 9357:1990 Matériel de traitement agropharmaceutique - Pulvérisateurs agricoles - Volume nominal du réservoir et diamètre du trou de remplissage.
NF A95-353*NF EN 24003:1993 Permeable sintered metal materials. Determination of bubble test pore size.
NF L22-437:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS,WITH LOCKING HOLES. ISO RH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF L22-438:1987 HEXAGONAL NUTS. REDUCED HEIGHT. NORMAL ACROSS FLATS,WITH LOCKING HOLES. ISO LH THREAD. 4H5H OR 5H TOLERANCE CLASS ACCORDING TO DIAMETER.
NF H35-100:2000 Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules.
NF X11-510:1988 Sieves and sieving. Wire gauze with square apertures made from annealed round wire for industrial use. Wire diameters.
NF J65-100:1958 Shipbuilding. Shaft lines. General specification. Nominal diameters.
NF J41-420:1957 Shipbuilding. Kingston valves, nominal bore 50-175 mm. Body.

Professional Standard - Aviation, Hole standard diameter

HB/Z 259-1994 Bottom hole diameter and deviation of interference thread process
HB 3874-1986 Bottom hole diameter and deviation of internal thread cutting process
HB 4270-2004 Small diameter smooth plug gauge of standard tapping ring for wire thread insert
HB 4207-1989 Vernier caliper for inner hole clearance groove diameter
HB 2075-1989 Vernier caliper for inner hole clearance groove diameter
HB 2075-1974 Vernier caliper for bore diameter
HB 2074-1974 Vernier caliper for bore diameter
HB 2074-1989 Vernier caliper for inner hole clearance groove diameter (B＝6~100mm)

AR-IRAM, Hole standard diameter

IRAM OFICIAL 11 N I O-1949

Professional Standard - Electron, Hole standard diameter

SJ 1819-1981 Preferred series--Module, number of teeth,face width and diameter of datum apperture for fine-pitch gears
SJ/T 10171.10-1991 Determination of maximum Pore diameter in separator.Bubble test method

JP-JARI, Hole standard diameter

JRIS R 0301-2006 Rolling stock-Hole size atandard for piping and wiring tube

CH-SNV, Hole standard diameter

SN EN 54 Teil 9-1984 Components of automatic fire detection SystemsPart 9: Fire sensitivity festOrganes constitutifs des systemes de detection automatique d'incendiePartie 9: Essais de sensibilite sur foyers types
SN ISO 105/X04:1984

RO-ASRO, Hole standard diameter

STAS SR ISO 10323:1995 Dental rotary instruments - Bore diameters for discs and wheels
STAS 12757/1-1989 BALL SCREWS Nominal diameteres and basic leads
STAS 2099-1989 Pipe componenls NOMINAL JMAMETERS
STAS R 584/1-1969
STAS 2561/4-1990 Foundation ground LARGE DIAMETER DRILLED PILES Design, construction and acceptance general specifications
STAS 3633-1971 Non-adjustable plain hole gauges. PLUG-GAUGE, WITH THE DIAME- TER FROM 100 to 200 mm Dimensions
STAS 8195-1984 RUBBER HOSKS Bore diameters and tolerances on length, proof and burst pressures
STAS 2374-1979 Geological Investigation equipment DRILLING HEADS AND COLLARS FOR DRILLING MACHINES Types and diameters
STAS 981-1974 ISO general purpose metric screw threads NOMINAL DIAMETERS AND PITCHES

GM North America, Hole standard diameter

GM GMT-81.103-1968 Tubeless Tire Valve Assemblies Straight Snap-in Type for .625 DIA Rim Holes
GM GMT-81.101-1968 Tubeless Tire Valve Assemblies Straight Snap-in Type for .453 DIA Rim Holes Recommended Valve Assembly for Passenger Cars

YU-JUS, Hole standard diameter

JUS K.T3.123-1983 G0 plug gauges for hofos from 1 to anti inckiding 50 mm nominal aintnater
JUS K.T3.120-1983 60 gauging membres for holes from 1 up to and including 50 mm nominal diameter
JUS K.T3.131-1983 NOTGO gauging memberes for holes over 40 to 120 mm nominal diameter cylindrical plug gauges
JUS K.T3.124-1983 NO TGO plug gauges for holes from 1 to and including 50 mm nominal diameter
JUS K.T3.121-1983 NOTGOgauging members; for vvholes from 1 to and including 50 mm nominal diameter
JUS K.T3.122-1983 GO and NO TGO plug gauges for holes from f to and including 50 mm nominal diameter
JUS K.T3.112-1983 Tile gauges GO and NOTGO for measures over 2 up to and including 8 mm nominal si?e
JUS K.T3.111-1983 Tile gauges GO and NOT GO for measures up to including 12 mm nominal si?e

British Standards Institution (BSI), Hole standard diameter

PD IEC TR 61760-3-1:2022 Surface mounting technology - Standard method for the specification of components for through hole reflow (THR) soldering. Guidelines for through hole diameter design with solder paste surface printing method
BS EN 4641-301:2022 Tracked Changes. Aerospace series. Cables, optical 125 μm diameter cladding. Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter. Product standard
BS 4185-14:1987 Machine tool components - Method for determination of the pilot diameter of 60 ° centre holes
BS ISO 8051:1999 Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess
BS ISO 8051:2016 Long shank taps with nominal diameters from M3 to M10. Full-diameter shank taps with recess
BS W 13:1973 Specification for preformed corrosion-resisting steel wire rope (ISO diameters and strengths)
BS EN 3145:2002 Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm D 250 mm - Dimensions
BS 5693:1978 Recommendations for preferred diameters of wire terminations of capacitors and resistors
BS EN 4641-301:2011 Aerospace series. Cables, optical 125 μm diameter cladding. Part 301: Tight structure 50/125 μm GI fibre nominal 1,8 mm outside diameter.Product standard
BS EN 4641-105:2010 Aerospace series. Cables, optical 125 $Gmm diameter cladding. Semi-loose, ruggedized quadraxial construction 62,5/125 $Gmm GI fibre nominal, 5,72 mm outside diameter. Product standard
BS 1580-3:2007 Unified screw threads - Part 3:Screw threads with diameters below 1/4 in - Requirements
BS EN 4641-106:2018 Aerospace series. Cables, optical, 125 μm diameter cladding - Semi-loose structure 62,5/125 μm GI fibre nominal 0,9 mm outside diameter. Product standard
BS EN 4641-200:2018 Aerospace series. Cables, optical, 125 μm diameter cladding - Semi-loose structure 9/125 μm GI fibre nominal 0,9 mm outside diameter. Product standard
BS EN 4641-201:2018 Aerospace series. Cables, optical, 125 μm diameter cladding - Semi-loose structure 9/125 μm SM fibre nominal 1,8 mm outside diameter. Product standard
BS 6101-5:1992 Machine tool ball screws. Specification for nominal diameters and nominal leads
BS 1580-1:2007 Unified screw threads Part 1: Screw threads with diameters 1/4 in and larger – Requirements
BS 3409-2:1966 Specification for the tapping of holes to receive wire thread inserts (UNC and UNF threads) - Diameters below 1/4 in

BE-NBN, Hole standard diameter

KR-KS, Hole standard diameter

KS M ISO 7370-2004 Glass fibre reinforced thermosetting plastics(GRP) pipes and fittings－Nominal diameters, specified diameters and standard lengths

SAE - SAE International, Hole standard diameter

SAE AS152601 THRU AS152900-1999 Stud@ Stepped@ Drilled@ 1.5 Dia Engagement@ .250-20 X .190-32
SAE AS153201 THRU AS153500-1998 Stud@ Stepped@ Drilled@ 1.5 Dia Engagement@ .375-16 x .3125-24
SAE AS152601 THRU AS152900A-2006 Stud Step Drill 1.5 Diameter Engage .250-20 X .190-32
SAE AS153201 THRU AS153500A-2010 Stud Stepped Drill 1.5 Diameter Engage .375-16 x .3125-24
SAE AS1620A-2019 STUD@ LOCKED IN - RING@ STRAIGHT@ HOLE PREPARATION FOR
SAE AS162501 THRU AS162800B-2016 Stud, Stepped, Drilled Necked, 2 Dia Engagement, .4375 X .375-24
SAE AS162501 THRU AS162800A-2007 Stud, Stepped, Drilled Necked, 2 Dia Engagement, .4375 X .375-24
SAE ARP551A-1958 "ACCESSORY ENVELOPE FOR 8"" NOMINAL DIAMETER GENERATORS"
SAE AS3121B-2019 PLUG@ EXPANSION@ ALUMINUM@ 2024-T4 AND 2024-T351@ LONG; STD AND .010 OVERSIZE DIAMETERS (UNS A92024)
SAE AS152601 THRU AS152900B-2014 STUD@ STEPPED@ DRILLED 1.5 DIA ENGAGEMENT@ CADMIUM PLATED@ STEEL UNS G87400@ .2500-20 UNS X .1900-32 UNF-3A
SAE AS3123-1981 Plug@ Expansion - Aluminum@ 2024-T4@ Short; Std and .010 Oversize Diameters

American Society of Mechanical Engineers (ASME), Hole standard diameter

ASME B16.47-2006 Large Diameter Steel Flanges NPS 26 Through NPS 60 Metric/Inch Standard
ASME B16.47-2011 Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard

National Metrological Technical Specifications of the People's Republic of China, Hole standard diameter

JJF 1806-2020 Calibration Specification for Measuring Equipment of Diameter of Micro and Small Hole
JJF(机械) 027-2008 Calibration Specifications for Relative Aperture Testers
JJF(机械) 1069-2021 Calibration specification for steel ball diameter checker
JJF(机械)1069-2021
JJF(机械) 1035-2019 Calibration specification for tapered roller diameter angle linearity measuring instrument
JJF(机械)1035-2019 Calibration specification for tapered roller diameter angle linearity measuring instrument

International Organization for Standardization (ISO), Hole standard diameter

ISO 7370:1983 Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings; Nominal diameters, specified diameters and standard lengths
ISO 3017:1973 Title missing - Legacy paper document
ISO 3017:1981 Abrasive discs; Designation, dimensions and tolerances; Selection of disc outside diameter/centre hole diameter combinations
ISO 3320:1975 Fluid power systems and components — Cylinder bores and piston rod diameters — Metric series
ISO 4783-1:1981 Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diameter combinations — Part 1: Generalities

PT-IPQ, Hole standard diameter

United States Navy, Hole standard diameter

NAVY MIL-T-23099 A (2)-1969 TAPPING KIT FOR SERVO-MOUNT POTENTIOMETERS TWO INCH DIAMETER
NAVY MIL-T-23099 A-1963 TAPPING KIT FOR SERVO-MOUNT POTENTIOMETERS TWO INCH DIAMETER
NAVY QPL-25896-2012 Adapter, Pressure Fuel Servicing, Nominal 2.5-Inch Diameter

IPC - Association Connecting Electronics Industries, Hole standard diameter

IPC TR-579 CD-1988 Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards

IN-BIS, Hole standard diameter

Defense Logistics Agency, Hole standard diameter

DLA AN160401 THRU AN160700 REV 2 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, 1.5 DIA ENGAGEMENT, .500-13 X .4375-20
DLA AN160401 THRU AN160700 REV 2-1972 STUD-STEPPED, DRILLED, NECKED, 1.5 DIA ENGAGEMENT, .500-13 X .4375-20
DLA AN163101 THRU AN163400 REV 3 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, .5625-12 X .500-20
DLA AN163101 THRU AN163400 REV 3-1986 STUD-STEPPED, DRILLED, NECKED, 2 DIA ENGAGEMENT, .5625-12 X .500-20
DLA AN160701 THRU AN161000 REV 3 VALID NOTICE 1-20 STUD STEPPED, DRILLED, NECKED, 1.5 DIA ENGAGEMENT, .5625-12 X .500-20
DLA AN160701 THRU AN161000 REV 3-1987 STUD STEPPED, DRILLED, NECKED, 1.5 DIA ENGAGEMENT, .5625-12 X .500-20
DLA AN170301 THRU AN170600 REV 2 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 2 DIA ENGAGEMENT, .5625-12 X .5000-20
DLA AN170301 THRU AN170600 REV 2-1972 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 2 DIA ENGAGEMENT, .5625-12 X .5000-20
DLA AN165501 THRU AN165800 REV 3 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .3125-18 X .250-28
DLA AN165501 THRU AN165800 REV 3-1987 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .3125-18 X .250-28
DLA AN166101 THRU AN166400 REV 3 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .4375-14 X .375-24
DLA AN166101 THRU AN166400 REV 3-1987 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .4375-14 X .375-24
DLA AN166401 THRU AN166700 REV 3 VALID NOTICE 1-20 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .500-13 X .4375-20
DLA AN166401 THRU AN166700 REV 3-1987 STUD-STEPPED, DRILLED, NECKED, WRENCH PAD, 1.5 DIA ENGAGEMENT, .500-13 X .4375-20
DLA A-A-59581 B-2003 BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, BORE DIAMETERS UNDER 10 MM
DLA AN154401 THRU AN154700 REV 4 VN 1-1994 STUD STEPPED, DRILLED, 1.5 DIA. ENGAGEMENT, .625-11 X .5625-18 (INACTIVE 10-26-72)
DLA AN154401 THRU AN154700 REV 4-1987 STUD STEPPED, DRILLED, 1.5 DIA. ENGAGEMENT, .625-11 X .5625-18 (INACTIVE 10-26-72)

VN-TCVN, Hole standard diameter

TCVN 2145-1977 Hydrostatic and pneumatic drives and lubricating systems.Standards diameters
TCVN 2017-1977 Hydraulic,pneumatic and lubricating systems.Moninal diameters

The American Road & Transportation Builders Association, Hole standard diameter

AASHTO M 294-2009 Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter
AASHTO M 326-2008 Standard Specification for Polyethylene (PE) Liner Pipe, 300- to 1600-mm Diameter, Based on Controlled Outside Diameter
AASHTO M 294-2007 Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter
AASHTO M 294-2008 Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter
AASHTO M 330-2013 Standard Specification for Polypropylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter
AASHTO MP 21-2011 Standard Specification for Polypropylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter
AASHTO M 294-2002 Standard Specification for Corrugated Polyethylene Pipe, 300- to 1200-mm Diameter HM-22; Part IB
AASHTO M 294-2011 Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter
AASHTO M 294-2015 Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter
AASHTO M 294-2016 Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter
AASHTO M 294-2021 Standard Specification for Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Hole standard diameter

IPC TR-579-1988 Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in Printed Wiring Boards

AASHTO - American Association of State Highway and Transportation Officials, Hole standard diameter

M 326-2018 Standard Specification for Polyethylene (PE) Liner Pipe@ 300- to 1600-mm Diameter@ Based on Controlled Outside Diameter
M 326-2008 Standard Specification for Polyethylene (PE) Liner Pipe@ 300- to 1600-mm Diameter@ Based on Controlled Outside Diameter
MP7-1997 Standard Specification for Corrugated Polyethylene Pipe@ 1350 and 1500 mm Diameter
M 294-2008 Standard Specification for Corrugated Polyethylene Pipe@ 300- to 1500-mm Diameter
M 294-2004 Standard Specification for Corrugated Polyethylene Pipe@ 300- to 1500-mm Diameter
M 294-2003 Standard Specification for Corrugated Polyethylene Pipe@ 300- to 1500-mm Diameter
M 294-2006 Standard Specification for Corrugated Polyethylene Pipe@ 300- to 1500-mm Diameter
M 294-2009 Standard Specification for Corrugated Polyethylene Pipe@ 300- to 1500-mm Diameter
M 294-2007 Standard Specification for Corrugated Polyethylene Pipe@ 300- to 1500-mm Diameter
M294-1998 Standard Specification for Corrugated Polyethylene Pipe@ 300- to 1200-mm Diameter (Twentieth Edition)
MP7-1999 Standard Specification for Corrugated Polyethylene Pipe@ 1350 and 1500 mm Diameter (2000 Edition)
MP6-1995 Standard Specification for Corrugated Polyethylene Pipe 1050 and 1200 mm Diameter (First Edition)
M294M-1998 Standard Specification for Corrugated Polyethylene Pipe@ 300- to 1200-mm Diameter (Nineteenth Edition)
M 330-2019 Standard Specification for Polypropylene Pipe@ 300- to 1500-mm (12- to 60-in.) Diameter
M 330-2018 Standard Specification for Polypropylene Pipe@ 300- to 1500-mm (12- to 60-in.) Diameter
MP 21-2011 Standard Specification for Polypropylene Pipe@ 300- to 1500-mm (12- to 60-in.) Diameter
M 330-2013 Standard Specification for Polypropylene Pipe@ 300- to 1500-mm (12- to 60-in.) Diameter

European Association of Aerospace Industries, Hole standard diameter

AECMA PREN 3145-1995 Aerospace Series Round Bars with Normal Tolerances Hot Formed, in Steel Diameter 6 mm Less Than or Equal to D Less Than or Equal to 250 mm Dimensions Edition P 1

AT-ON, Hole standard diameter

ONORM B 4440-2001 Geotechnical engineering (foundation engineering) - Large diameter bored piles - Bearing capacity
ONORM M 7331-1980 Nominal sizes (diameters) of piping Systems

Military Standard of the People's Republic of China-General Armament Department, Hole standard diameter

GJB 9353-2018 External calibration method for spaceborne synthetic aperture radar
GJB 9352-2018 Internal calibration method of spaceborne synthetic aperture radar

International Electrotechnical Commission (IEC), Hole standard diameter

IEC TR 61760-3-1:2022 Surface mounting technology - Part 3-1: Standard method for the specification of components for through hole reflow (THR) soldering – Guidelines for through hole diameter design with solder paste surf

Institute of Electrical and Electronics Engineers (IEEE), Hole standard diameter

SMPTE ST 215:1995 ST 215:1995 - SMPTE Standard - For Motion-Picture Film (65-mm) — Camera Aperture Image
SMPTE ST 201:1996 ST 201:1996 - SMPTE Standard - For Motion-Picture Film (16-mm)— Type W Camera Aperture Image
SMPTE ST 7:2004 ST 7:2004 - SMPTE Standard - For Motion-Picture Film (16-mm) — Camera Aperture Image and Usage
SMPTE ST 59:1998 ST 59:1998 - SMPTE Standard - For Motion-Picture Film (35-mm) — Camera Aperture Images and Usage
SMPTE ST 417:2005 ST 417:2005 - SMPTE Standard - For Motion-Picture Film (65-mm) — Camera Aperture Image and Usage, 15/70 Format

Japanese Industrial Standards Committee (JISC), Hole standard diameter

JIS R 1671:2006 Testing method for water permeability and hydraulic equivalent diameter of porous fine ceramics
JIS Z 2324-1:2018 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 1: Standard test blocks

Professional Standard - Medicine, Hole standard diameter

YY/T 1011-2014 Dental rotary instruments.Nominal diameters and designation code number
YY/T 1011-2022

PK-PSQCA, Hole standard diameter

PS 282-1963 METHOD OF TEST FOR AMOUNT OF MATERIAL FINER THAN No. 200 BS SIEVE IN AGGREGATES

European Committee for Standardization (CEN), Hole standard diameter

EN 3145:2001 Aerospace series - Round bars, hot rolled in steel - Normal tolerances; Diameter 6 mm <= D <= 250 mm; Dimensions
EN ISO 2157:2016 Dentistry - Nominal diameters and designation code numbers for rotary instruments

Aerospace Industries Association/ANSI Aerospace Standards, Hole standard diameter

AIA/NAS NASM28728/2-2011 DIAL, CONTROL, MULTITURN COUNTERS, VERNIER, 1.75 DIAMETER

AIA/NAS - Aerospace Industries Association of America Inc., Hole standard diameter

NASM28728/2-2001 Dial@ Control@ Multiturn Counters@ Vernier@ 1.75 Diameter
NASM28728/8-2001 Dial@ Control@ Multiturn Counters@ Vernier@ .88 Diameter
NASM28728/4-2001 Dial@ Control@ Multiturn Counters@ Vernier@ 1.16 Diameter
NASM28728/1-2001 Dial@ Control@ Multiturn Counters@ Vernier@ 1.81 Diameter

ES-UNE, Hole standard diameter

UNE-EN 4641-301:2022 Aerospace series - Cables, optical 125 µm diameter cladding - Part 301: Tight structure 50/125 µm GI, fibre nominal 1,8 mm, outside diameter - Product standard