ZH

RU

ES

Mass spectrometer inspection

Mass spectrometer inspection, Total:432 items.

In the international standard classification, Mass spectrometer inspection involves: Analytical chemistry, Mechanical testing, Medical equipment, Quality, Pipeline components and pipelines, Optics and optical measurements, Power stations in general, Linear and angular measurements, Products of the chemical industry, Electricity. Magnetism. Electrical and magnetic measurements, Non-destructive testing, Optoelectronics. Laser equipment, Protection against crime, Vibrations, shock and vibration measurements, Test conditions and procedures in general, Pesticides and other agrochemicals, Tea. Coffee. Cocoa, General methods of tests and analysis for food products, Fruits. Vegetables, Prepackaged and prepared foods, Nuclear energy engineering, Cereals, pulses and derived products, Milk and milk products, Sensory analysis, Spices and condiments. Food additives, Plastics, Fibre optic communications, Water quality, Fishing and fish breeding, Fluid storage devices, Refractories, Non-ferrous metals, Fuels, Lubricants, industrial oils and related products, Physics. Chemistry, Food products in general, Medical sciences and health care facilities in general, Metrology and measurement in general, Radiation measurements, Laboratory medicine, Petroleum products in general, Protection against fire, Ferrous metals, Seals, glands, Shafts and couplings, Meat, meat products and other animal produce, Leather technology, Textile fibres, Electromagnetic compatibility (EMC), Farming and forestry, Natural gas, Animal feeding stuffs, Soil quality. Pedology, Testing of metals, Petroleum, petroleum products and natural gas handling equipment, Organic chemicals, Processes in the food industry, Inorganic chemicals, Radiation protection.


General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Mass spectrometer inspection

  • GB/T 25472-2010 Quality inspection provisions for analyzers
  • GB/T 16860-1997 Sensory analysis methodology--Texture profile
  • GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers
  • GB/T 18654.15-2008 Inspection of germplasm for cultured fishes.Part 15: RAPD analysis
  • GB/T 18654.5-2008 Inspection of germplasm for cultured fishes. Part 5: Analysis of feeding habits
  • GB/T 5750.3-2006 Standard examination methods for drinking water.Water analysis quality control
  • GB/T 42429-2023 Liquid Chromatography-Mass Spectrometry for the Detection of Organic Components in Forensic Science Propellants
  • GB/T 18654.7-2008 Inspection of germplasm for cultured fishes. Part 7: Analysis of ecological characteristics
  • GB/T 5750.3-2023 Standard Examination Methods for Drinking Water Part 3: Water Analysis Quality Control
  • GB/T 18654.12-2002 Inspection of germplasm for cultured fishes--Part 12: Method for the karyotype analysis
  • GB/T 18654.13-2008 Inspection of germplasm for cultured fishes.Part 13:Analysis of isozyme electrophoresis
  • GB/T 18654.12-2008 Inspection of germplasm for cultured fishes. Part 12: Method for the karyotype analysis
  • GB/T 19267.7-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 7:Gas chromatography/mass spectrometry
  • GB/T 19267.7-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 7: Gas chromatography/mass spectrometry
  • GB/T 31836-2015 Radiation protection instrumentation.Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material

Professional Standard - Machinery, Mass spectrometer inspection

National Metrological Verification Regulations of the People's Republic of China, Mass spectrometer inspection

Group Standards of the People's Republic of China, Mass spectrometer inspection

  • T/ZPP 017-2023 Mass Cytometry Analyzer
  • T/CSTM 00253-2020 Test method of thermal analysis coupled with mass spectrometry for phenolic resin
  • T/CAS ES380926001-2022 Rules for quality grading and evaluating of industrial products—Online analyzers – Online combustible and toxic gas detector

Shanxi Provincial Standard of the People's Republic of China, Mass spectrometer inspection

  • DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy
  • DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography

American Society for Testing and Materials (ASTM), Mass spectrometer inspection

  • ASTM E1603-99 Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
  • ASTM E1603-99(2006) Standard Test Methods for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
  • ASTM E1603/E1603M-11 Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
  • ASTM E1603/E1603M-11(2017) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
  • ASTM E498-95(2000) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
  • ASTM E498/E498M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
  • ASTM E498/E498M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
  • ASTM E498-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
  • ASTM E498/E498M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
  • ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
  • ASTM E493-97 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
  • ASTM E499-95(2006) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
  • ASTM E1603/E1603M-11(2022) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
  • ASTM E493-06 Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
  • ASTM E493/E493M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
  • ASTM C791-83(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
  • ASTM E499/E499M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
  • ASTM C1344-03(2008) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
  • ASTM C1344-97(2013) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
  • ASTM D1137-53 Method for Analysis of Natural Gases and Related Types of Gaseous Mixtures by the Mass Spectrometer
  • ASTM C696-11 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
  • ASTM C1344-97(2008) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
  • ASTM D7941/D7941M-23 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
  • ASTM C1429-99(2009)e1 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
  • ASTM D7941/D7941M-14 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
  • ASTM D7690-11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
  • ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
  • ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
  • ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
  • ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
  • ASTM C1429-99(2004) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
  • ASTM C1428-18(2023) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method
  • ASTM C1429-21 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
  • ASTM C1428-99 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
  • ASTM C1429-99(2009) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
  • ASTM C1429-99 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
  • ASTM C1742-10 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double Standard Single-Collector Gas Mass Spectrometer Method
  • ASTM C1429-99(2014) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
  • ASTM E2997-16 Standard Test Method for Analysis of Biodiesel Products by Gas Chromatography-Mass Spectrometry
  • ASTM C791-19 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
  • ASTM C809-94(2000) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum Oxide-Boron Carbide Composite Pellets
  • ASTM C791-12 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
  • ASTM D6621-00(2012) Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
  • ASTM C1428-99(2005) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
  • ASTM C1428-11 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
  • ASTM C791-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
  • ASTM C759-10 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
  • ASTM C791-11 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
  • ASTM C698-16 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
  • ASTM D5142-90(1998) Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
  • ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
  • ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
  • ASTM D933-84(2003) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • ASTM D933-20 Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
  • ASTM D6621-00 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
  • ASTM D6621-00(2006)e1 Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
  • ASTM C1413-05(2011) Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
  • ASTM C698-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
  • ASTM C761-18 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
  • ASTM E2402-11(2017) Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
  • ASTM E2402-19 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
  • ASTM D7649-10 Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis
  • ASTM D7112-18 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
  • ASTM D7112-12 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
  • ASTM D7112-12(2017) Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
  • ASTM D7112-19 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
  • ASTM C1379-10 Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry
  • ASTM C698-98 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
  • ASTM C758-04(2010) Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
  • ASTM C758-18 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
  • ASTM D7751-12 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
  • ASTM C1476-00 Standard Test Method for Analysis of Urin for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry
  • ASTM E1140-95(2000) Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography
  • ASTM C697-98 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
  • ASTM C696-99(2005) Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
  • ASTM C696-99 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
  • ASTM C696-19 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets
  • ASTM C1428-18 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method
  • ASTM C889-06 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
  • ASTM C1476-06 Standard Test Method for Analysis of Urine for Technetium-99 by Inductively Coupled Plasma-Mass Spectrometry
  • ASTM C889-11 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
  • ASTM F2405-04(2011) Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM C761-04 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
  • ASTM C761-04e1 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
  • ASTM C761-11 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
  • ASTM C759-18 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
  • ASTM F1710-97 Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM F1710-97(2002) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D2786-91(2001)e1 Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D2786-91(1996) Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D323-90 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM D323-94 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM D2786-91(2006) Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D2786-91(2011) Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D2786-91(2016) Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D3239-91(2011) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D3239-91(2016) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D323-15 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM D323-15a Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM F2405-04 Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM F1593-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
  • ASTM F1710-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer
  • ASTM C697-10 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
  • ASTM C698-10 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
  • ASTM D8431-22 Standard Test Method for Detection of Water-soluble Petroleum Oils by A-TEEM Optical Spectroscopy and Multivariate Analysis
  • ASTM D8469-22 Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
  • ASTM D846-84 Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
  • ASTM C758-04 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
  • ASTM C697-04 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
  • ASTM C758-98 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
  • ASTM D8310-20 Standard Test Method for Analysis of Target Phenols (TPs) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
  • ASTM C889-99 Standard Test Methods for Chemical and Mass Spectrographic Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
  • ASTM C1455-07 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
  • ASTM D2360-07 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography
  • ASTM C1455-14 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods
  • ASTM C1637-21 Standard Test Method for Determination of Impurities in Plutonium Materials—Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
  • ASTM C1637-13 Standard Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis
  • ASTM D3239-91(1996) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D3239-91(2001) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM D3239-91(2006) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
  • ASTM C1344-97(2003) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
  • ASTM C1344-97 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
  • ASTM C761-01e1 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
  • ASTM C761-96 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
  • ASTM C1344-97(2008)e1 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
  • ASTM D8470-22 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems
  • ASTM C759-98 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
  • ASTM C759-04 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
  • ASTM E1618-11 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
  • ASTM C799-12 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions
  • ASTM C1909-21 Standard Test Method for Moisture Analysis of Plutonium Dioxide (PuO2) by Thermogravimetric Mass Spectrometry (TGA-MS)

RU-GOST R, Mass spectrometer inspection

  • GOST 4.361-1985 Product-quality index system. Mass-spectrometric analysers. Index nomenclature
  • GOST 4.450-1986 Product-quality index system. Instruments for spectral analysis. Nomenclature of indices
  • GOST 33490-2015 Milk and milk products. Detection of vegetable fat by gas chromatography with mass spectrometric detection
  • GOST 4.163-1985 Product-quality index system. Chromatographic liquid and gas analysers. Nomenclature of indices
  • GOST 8.485-2013 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
  • GOST 8.485-1983 State system for ensuring the uniformity of measurements. Analitical gas laboratory chromatographs. Methods and means of verification
  • GOST R 8.772-2011 State system for ensuring the uniformity of measurements. Analytical liquid laboratory chromatographs. The method of verification
  • GOST 8.625-2013 State system for ensuring the traceability of measurements. Chromato-mass-spectrometric multipurpose analyzers for measurement of persistent organic compounds in foodstuffs, feed-stuffs and agricultural productions. Verification procedure
  • GOST R 53079.4-2008 Medical laboratory technologies. Quality assurance of clinical laboratory tests. Part 4. Rules for conducting of preanalytical stage
  • GOST R 55991.1-2014 In vitro diagnostics medical devices. Part 1. Automatic analyzers for biochemical assays. Technical requirements for public procurement

Korean Agency for Technology and Standards (KATS), Mass spectrometer inspection

  • KS C 6918-1995 Test methods of fiber-optic spectrum analyzer
  • KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
  • KS I ISO 23913-2009(2019) Water quality-Determination of chromium(VI)-Method using flow analysis(FIA and CFA) and spectrometric detection
  • KS I ISO 11732-2008(2018) Water quality-Determination of ammonium nitrogen-Method by flow analysis(CFA and FIA) and spectrometric detection
  • KS D ISO 15632:2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
  • KS C IEC 61290-5-1-2007(2022) Optical amplifiers-Test methods-Part 5-1:Reflectance parameters -Optical spectrum analyzer method
  • KS C IEC 61290-5-1-2007(2017) Optical amplifiers-Test methods-Part 5-1:Reflectance parameters -Optical spectrum analyzer method
  • KS C IEC 61290-3-1-2005(2020) Optical amplifiers-Test methods-Part 3-1:Noise figure parameters-Optical spectrum analyzer method
  • KS C IEC 61290-3-1:2005 Optical amplifiers-Test methods-Part 3-1:Noise figure parameters-Optical spectrum analyzer method
  • KS C IEC 61290-5-1:2007 Optical amplifiers-Test methods-Part 5-1:Reflectance parameters -Optical spectrum analyzer method
  • KS C IEC 61290-10-2-2005(2020) Optical amplifiers-Test methods-Part 10-2:Multichannel parameters-Pulse method using a gated optical spectrum analyzer
  • KS I ISO 18749:2010 Water quality-Adsorption of substances on activated sludge-Batch test using specific analytical methods
  • KS C IEC 61290-10-1-2005(2020) Optical amplifiers-Test methods-Part 10-1:Multichannel parameters-Pulse method using an optical switch and optical spectrum analyzer
  • KS C IEC 61290-3-2-2005(2020) Optical amplifiers-Part 3-2:Test methods for noise figure parameters-Electrical spectrum analyzer method
  • KS C IEC 61290-10-2:2005 Optical amplifiers-Test methods-Part 10-2:Multichannel parameters-Pulse method using a gated optical spectrum analyzer
  • KS C IEC 61290-5-3:2003 Basic specification for optical amplifier test methods-Part 5-3:Test methods for reflectance parameters-Reflectance tolerance using an electrical spectrum analyser

Professional Standard - Electricity, Mass spectrometer inspection

  • DL/T 386-2010 Calibration for second derivative flame atomic emission spectrometer
  • DL/T 1028-2006 Verification code for power quality analyzer
  • DL/T 913-2005 Quality inspection guide for water quality analyzers in thermal power plant
  • DL/T 913-2020 Guidelines for quality acceptance of water quality analysis instruments in power plants
  • DL/T 1029-2006 Laboratory quality management guide for water quality analyzers in thermal power plant

ISA - International Society of Automation, Mass spectrometer inspection

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Mass spectrometer inspection

Professional Standard - Agriculture, Mass spectrometer inspection

Military Standard of the People's Republic of China-General Armament Department, Mass spectrometer inspection

  • GJB 8805-2015 Calibration procedures for wideband spectrum analyzers

工业和信息化部, Mass spectrometer inspection

  • HG/T 5831-2021 Online gas mass spectrometer analyzer for chemical industry
  • YB/T 4997-2022 Rules for the use of calibration and quality control charts in spectrochemical analysis

Professional Standard - Electron, Mass spectrometer inspection

  • SJ 20251-1993 Verification reguation of model YH4020/YH4021/YH4022 spectrum analyzers
  • SJ 20250-1993 Verification reguation of model HP8590A RF spectrum analyzers
  • SJ 20249-1993 Verification reguation of model BP28A LF spectrum analyzers
  • SJ 20248-1993 Verification reguation of model ED4070 dual-channel

British Standards Institution (BSI), Mass spectrometer inspection

  • BS EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
  • BS ISO 13084:2018 Tracked Changes. Surface chemical analysis. Secondary ion mass spectrometry. Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • 20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • BS EN 61290-5-1:2006 Optical amplifiers - Test methods - Reflectance parameters - Optical spectrum analyzer method
  • BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
  • BS ISO 15632:2021 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
  • BS 1902-9.2:1987 Methods of testing refractory materials - Chemical analysis by instrumental methods - Analysis of silica refractories by X-ray fluorescence
  • BS EN 1786:1997 Foodstuffs - Detection of irradiated food containing bone - Method by ESR spectroscopy
  • BS DD ISO/TS 11251:2010 Nanotechnologies. Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
  • BS EN ISO 11732:2005 Water quality. Determination of ammonium nitrogen. Method by flow analysis (CFA and FIA) and spectrometric detection
  • BS EN ISO 23913:2009 Water quality - Determination of Chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection
  • BS PD ISO/TS 17951-1:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
  • BS EN 61290-10-2:2009 Optical amplifiers. Test methods. Multichannel parameters. Pulse method using a gated optical spectrum analyzer
  • BS EN 61290-10-2:2008 Optical amplifiers – Test methods — Part 10-2: Multichannel parameters – Pulse method using a gated optical spectrum analyzer
  • 19/30394914 DC BS ISO 15632. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energydispersive X-ray spectrometers for use in electron probe microscope or an electron probe microanalyser (EPMA)
  • BS EN 1785:2003 Foodstuffs. Detection of irradiated food containing fat. Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones
  • BS EN 61290-5-2:2004 Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Electrical spectrum analyser method
  • BS EN 61290-10-2:2003 Optical amplifiers - Test methods - Multichannel parameters - Pulse method using a gated optical spectrum analyzer
  • BS EN 61290-1-1:2006 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • BS EN 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
  • BS EN 61290-1-1:2015 Optical amplifiers. Test methods. Power and gain parameters. Optical spectrum analyzer method
  • BS EN 61290-1-2:2007 Optical amplifiers. Test methods. Power and gain parameters. Electrical spectrum analyzer method
  • BS EN 61290-1-1:2007 Optical amplifiers. Test methods. Power and gain parameters. Optical spectrum analyzer method
  • BS EN 61290-3-2:2003 Optical fibre amplifiers - Basic specification - Test methods for noise figure parameters - Electrical spectrum analyzer method
  • BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
  • PD ISO/TS 17951-1:2016 Water quality. Determination of fluoride using flow analysis (FIA and CFA). Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
  • BS EN 17212:2019 Animal Feeding stuffs. Methods of sampling and analysis. Determination of melamine and cyanuric acid content by liquid chromatographic method with mass spectrometric detection (LC-MS/MS)
  • BS ISO 13914:2013 Soil quality. Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high-resolution mass selective detection (GC/HRMS)
  • BS ISO 19668:2017 Surface chemical analysis. X-ray photoelectron spectroscopy. Estimating and reporting detection limits for elements in homogeneous materials
  • BS EN 61290-10-1:2003 Optical amplifiers - Test methods - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer

Japanese Industrial Standards Committee (JISC), Mass spectrometer inspection

  • JIS C 6183-1:2019 Optical spectrum analyzers -- Part 1: Test methods
  • JIS Z 8754:1988 Mass-spectrometer-type leak-detector calibration
  • JIS C 6183:1992 Test methods of fiber-optic spectrum analyzer
  • JIS K 0157:2021 Surface chemical analysis -- Secondary ion mass spectrometry -- Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • JIS K 0155:2018 Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-flight mass analysers
  • JIS C 6122-5-1:2001 Optical fiber amplifiers -- Test methods -- Part 5-1: Test methods for reflectance parameters -- Optical spectrum analyzer test method
  • JIS C 6122-3-2:2006 Optical amplifiers -- Test methods -- Part 3-2: Noise figure parameters -- Electrical spectrum analyzer method
  • JIS C 6122-3-1:2011 Optical amplifiers -- Test methods -- Part 3-1: Noise figure parameters -- Optical spectrum analyzer method
  • JIS C 6122-10-2:2010 Optical amplifiers -- Test methods -- Part 10-2: Multichannel parameters -- Pulse method using a gated optical spectrum analyzer
  • JIS K 0167:2011 Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials
  • JIS C 6122-10-1:2007 Optical amplifiers -- Test methods -- Part 10-1: Multichannel parameters -- Pulse method using an optical switch and optical spectrum analyzer
  • JIS C 6122-10-4:2012 Optical amplifiers -- Test methods -- Part 10-4: Multichannel parameters -- Interpolated source subtraction method using an optical spectrum analyzer

司法部, Mass spectrometer inspection

  • SF/T 0079-2020 Real-time direct analysis of inkblots-technical specifications for high-resolution mass spectrometry inspection
  • SF/T 0064-2020 Gas chromatography-high-resolution mass spectrometry detection method for 188 poisons (drugs) in blood

National Metrological Technical Specifications of the People's Republic of China, Mass spectrometer inspection

International Organization for Standardization (ISO), Mass spectrometer inspection

  • ISO 13084:2011 Surface chemical analysis - Secondary-ion mass spectrometry - Calibration of the mass scale for a time-of-flight secondary-ion mass spectrometer
  • ISO 13084:2018 Surface chemical analysis — Secondary ion mass spectrometry — Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • ISO 178:1975 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2013 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 178:2019 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 17862:2022 Surface chemical analysis — Secondary ion mass spectrometry — Linearity of intensity scale in single ion counting time-of-flight mass analysers
  • ISO 28540:2011 Water quality - Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water - Method using gas chromatography with mass spectrometric detection (GC-MS)
  • ISO/TS 11251:2010 Nanotechnologies - Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
  • ISO 18749:2004 Water quality - Adsorption of substances on activated sludge - Batch test using specific analytical methods
  • ISO/CD 2620 Analysis of natural gas — Biomethane — Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors
  • ISO/TS 17951-1:2016 Water quality - Determination of fluoride using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation
  • ISO 17331:2004/Amd 1:2010 Surface chemical analysis - Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy; Amendment 1
  • ISO 13914:2023 Soil, treated biowaste and sludge — Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)
  • ISO 13914:2013 Soil quality.Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high-resolution mass selective detection (GC/HRMS)

European Committee for Standardization (CEN), Mass spectrometer inspection

  • PD CEN/TR 16468:2013 Food analysis - Determination of pesticide residues by GC-MS - Retention times@ mass spectrometric parameters and detector response information
  • EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
  • EN ISO 11732:2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005)
  • EN 1785:2003 Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones
  • EN 1785:1996 Foodstuffs - Detection of Irradiated Food Containing Fat - Gas Chromatographic / Mass Spectrometric Analysis of 2-Alkylcyclobutanones
  • EN 16521:2014 Cosmetics - Analytical methods - GC/MS method for the identification and assay of 12 phthalates in cosmetic samples ready for analytical injection
  • CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
  • CEN/TR 16468:2013 Food analysis - Determination of pesticide residues by GC-MS - Retention times, mass spectrometric parameters and detector response information
  • PD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials

Association Francaise de Normalisation, Mass spectrometer inspection

  • NF X20-302:1974 Gas analysis by mass spectrometry. Determination of gas chemical composition.
  • NF V03-155:2010 Food analysis - Determination of patuline by High performance liquid chromatography - Mass spectrometry/Mass spectrometry method (HPLC-MS/MS).
  • NF V56-003-2*NF EN 16466-2:2013 Vinegar - Isotopic analysis of acetic acid and water - Part 2: 0C-IRMS analysis of acetic acid
  • NF EN ISO 11732:2005 Qualité de l'eau - Dosage de l'azote ammoniacal - Méthode par analyse en flux (CFA et FIA) et détection spectrométrique
  • NF EN 1785:2003 Produits alimentaires - Détection d'aliments ionisés contenant des lipides - Analyse par chromatographie en phase gazeuse/Spectrométrie de masse des 2-alkylcytobutanones
  • NF EN ISO 23913:2009 Qualité de l'eau - Dosage du chrome(VI) - Méthode par analyse en flux (FIA et CFA) et détection spectrométrique
  • NF V03-001*NF EN 1785:2003 Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones
  • NF C93-805-5-2*NF EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2 : reflectance parameters - Electrical spectrum analyser method
  • NF C93-805-5-3*NF EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.
  • NF C93-805-3-1*NF EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1 : noise figure parameters - Optical spectrum analyzer method
  • NF EN 1784:2003 Produits alimentaires - Détection d'aliments ionisés contenant des lipides - Analyse par chromatographie en phase gazeuse des hydrocarbures
  • NF C93-805-1-1:2020 Optical amplifiers - Test methods - Part 1-1 : Power and gain parameters - Optical spectrum analyzer method
  • NF C93-805-1-1:2007 Optical amplifiers - Test methods - Part 1-1 : power and gain parameters - Optical spectrum analyzer method.
  • NF A06-902*NF EN 12938:2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry.
  • NF C93-805-5-1:2001 Optical fibre amplifiers - Basic specification - Part 5-1 : test methods for reflectance parameters - Optical spectrum analyser.
  • NF C93-805-2-2*NF EN 61290-2-2:1998 Optical fibre amplifiers. Basic specification. Part 2-2 : test methods for optical power parameters. Electrical spectrum analyzer.
  • FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
  • NF C93-805-1-2*NF EN 61290-1-2:2006 Optical amplifiers - Test methods - Part 1-2 : power and gain parameters - Electrical spectrum analyzer method.
  • NF C93-805-10-4*NF EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4 : multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
  • XP T90-224:2013 Water Quality - Determination of Trihalomethanes in swimming pool water - Method using either static headspace or purge-and-trap with thermal desorption, on-line with gas chromatographic analysis with mass spectrometric detection
  • FD V03-157*FD CEN/TR 16468:2013 Food analysis - Determination of pesticide residues by GC-MS - Retention times, mass spectrometric parameters and detector response information
  • FD CEN/TR 16468:2013 Analyse des produits alimentaires - Détermination des résidus de pesticides par CG-SM - Temps de rétention, paramètres de spectrométrie de masse et information sur la réponse des détecteurs
  • NF EN ISO 13395:1996 Qualité de l'eau - Détermination de l'azote nitreux et de l'azote nitrique et de la somme des deux par analyse en flux (CFA et FIA) et détection spectrométrique
  • NF C93-805-10-2:2003 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer.
  • NF C93-805-10-2*NF EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer
  • NF V18-248*NF EN 17212:2019 Animal Feeding stuffs - Methods of sampling and analysis - Determination of melamine and cyanuric acid content by liquid chromatographic method with mass spectrometric detection (LC-MS/MS)

German Institute for Standardization, Mass spectrometer inspection

  • DIN 10785:2013 Analysis of coffee and coffee products - Determination of acrylamide - Methods using HPLC-MS/MS and GC-MS after derivatization
  • DIN 28411:1976 Vacuum technology; acceptance specifications for mass spectrometer-type leak-detector, terms
  • DIN EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors; German version EN 1518:1998
  • DIN EN ISO 11732:2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005); German version EN ISO 11732:2005
  • DIN EN 12938:2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry (includes AC:2000); German version EN 12938:1999 + AC:2000
  • DIN ISO 15632:2022-09 Microbeam analysis - Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA) (ISO 15632:2...
  • DIN EN 61290-5-1:2007 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006); German version EN 61290-5-1:2006
  • DIN 51820-1:1989 Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum
  • DIN 38407-14:1994 German standard methods for the examination of water, waste water, and sludge - Jointly determinable substances (group F) - Part 14: Determination of phenoxyalkyl carbonic acids by gas chromatography and mass-spectrometric detection after solid-liquid-ext
  • DIN EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method (IEC 61290-5-2:2003); German version EN 61290-5-2:2004
  • DIN EN 1785:2003-11 Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones; German version EN 1785:2003
  • DIN 51577-4:1994 Testing of mineral oil hydrocarbons and similar products; determination of chlorine and bromine content; analysis by energy dispersive X-ray spectrometry with low cost instruments
  • DIN EN 61290-3-1:2004 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method (IEC 61290-3-1:2003); German version EN 61290-3-1:2003
  • DIN EN 61290-1-1:2007 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method (IEC 61290-1-1:2006); German version EN 61290-1-1:2006
  • DIN EN 1785:2003 Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones; German version EN 1785:2003
  • DIN EN ISO 11732:2005-05 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005); German version EN ISO 11732:2005
  • DIN EN ISO 23913:2009-09 Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006); German version EN ISO 23913:2009
  • DIN ISO 28540:2014 Water quality - Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water - Method using gas chromatography with mass spectrometric detection (GC-MS) (ISO 28540:2011)
  • DIN 10336:1994 Detection and determination of foreign fats in milk fat by gaschromatographic analysis of triglycerides
  • DIN 3761-14:1984 Rotary shaft lip type seals for automobils; test; infrared-spectroscopic analysis of elastomers
  • DIN 10968:2003 Sensory analysis - Determination and examination of the sensory minimum durability of foodstuffs
  • DIN 53345-8:1984 Testing of fat liquors for leather; methods of analysis; evaluation of electrolyte resistance
  • DIN EN ISO 20418-3:2020 Textiles - Qualitative and quantitative proteomic analysis of some animal hair fibres - Part 3: Peptide detection using LC-MS without protein reduction (ISO 20418-3:2020); German version EN ISO 20418-3:2020
  • DIN 38407-9:1991 German standard methods for the examination of water, waste water and sludge; substance group analysis (group F); determination of benzene and some of its derivatives by gas chromatography (F 9)
  • DIN 53346:1984 Testing of fat liquors for furskins; methods of analysis, evaluation of electrolyte resistance
  • DIN EN 61290-10-4:2008 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007); German version EN 61290-10-4:2007
  • DIN 38413-6:2007 German standard methods for the examination of water, waste water and sludge - Single components (group P) - Part 6: Determination of acrylamide - Methode using high performance liquid chromatography with mass spectrometric detection (HPLC-MS/MS) (P 6)
  • DIN 51451:2004 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
  • DIN EN 17212:2019-11 Animal Feeding stuffs - Methods of sampling and analsysis - Determination of melamine and cyanuric acid content by liquid chromatographic method with mass spectrometric detection (LC-MS/MS); German version EN 17212:2019
  • DIN EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008
  • DIN 51431-2:2004 Testing of lubricants - Determination of the magnesium content - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRF)
  • DIN IEC 61453:2008 Nuclear Instrumentation - Scintillation gamma ray detector systems for the assay of radionuclides - Calibration and functional checks (IEC 61453:2007)
  • DIN EN 61290-1-2:2006 Optical amplifier - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method (IEC 61290-1-2:2005); German version EN 61290-1-2:2005
  • DIN EN 17212:2019 Animal Feeding stuffs - Methods of sampling and analsysis - Determination of melamine and cyanuric acid content by liquid chromatographic method with mass spectrometric detection (LC-MS/MS)
  • DIN 38407-37:2013 German standard methods for the examination of water, waste water and sludge - Jointly determinable substances (group F) - Part 37: Determination of organochlorine pesticides, polychlorinated biphenyls and chlorobenzene in water - Method using gas chromat

国家市场监督管理总局、中国国家标准化管理委员会, Mass spectrometer inspection

  • GB/T 40129-2021 Surface chemical analysis—Secondary ion mass spectrometry—Calibration of the mass scale for a time-of-flight secondary ion mass spectrometer
  • GB/T 39879-2021 Examination methods for five components in opium in suspected drugs—Gas chromatography and gas chromatography-mass spectrometry
  • GB/T 39884-2021 Examination methods for three components in cannabis in suspected drugs—Gas chromatography and gas chromatography-mass spectrometry

Taiwan Provincial Standard of the People's Republic of China, Mass spectrometer inspection

  • CNS 8861-1982 Method of Test for Glass Apparatus for Chemical Analysis

GB-REG, Mass spectrometer inspection

Professional Standard - Grain, Mass spectrometer inspection

  • LS/T 3706-2012 Test instrument of grain and oils.Technical requirements and test method for automatic titration analyzer
  • LS/T 6105-2012 Determination of fatty acid value of grains and oils in grains and products Automatic titration analyzer method

Professional Standard - Navy, Mass spectrometer inspection

  • HJB 399.13-2007 JL-1 Submarine Strategic Missile Technology Position Support Equipment Repair Inspection and Acceptance Regulations Part 13: Helium Mass Spectrometer Leak Detector

CN-STDBOOK, Mass spectrometer inspection

  • 图书 A-4792 Case Analysis of Qualification Accreditation of Inspection and Testing Institutions (Volume 1)

ZA-SANS, Mass spectrometer inspection

  • SANS 11732:2006 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection
  • SANS 61290-5-1:2007 Optical amplifiers - Test methods Part 5-1: Reflectance parameters - Optical spectrum analyzer method

Professional Standard - Medicine, Mass spectrometer inspection

  • YY/T 0188.5-1995 Operating methods for the tests and assays of drugs.Part 5:Instrumental determinations of drugs

CEN - European Committee for Standardization, Mass spectrometer inspection

  • EN ISO 11732:1997 Water Quality - Determination of Ammonium Nitrogen by Flow Analysis (CFA and FIA) and Spectrometric Detection

Indonesia Standards, Mass spectrometer inspection

VN-TCVN, Mass spectrometer inspection

  • TCVN 7409-2010 Foodstuffs.Detection of irradiated food containing fat.Gas chromatographic/mass spectrometric analysic of 2-alkylcyclobutanones
  • TCVN 6134-2009 Soil quality.Solvent extractable nonvolatile compounds by high performance liquid omatography/thermospray/mass spectrometry (HPLC/TS/MS) or ultraviolet (UV) detection

BR-ABNT, Mass spectrometer inspection

RO-ASRO, Mass spectrometer inspection

AT-ON, Mass spectrometer inspection

  • ONORM M 6623-1994 Water analysis - Determination of phenoxyalkyl carbonic acids by gas chromatography and mass-spectrometric detection after solid-liquid-extraction and derivatization

KR-KS, Mass spectrometer inspection

  • KS D ISO 15632-2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis

Professional Standard - Commodity Inspection, Mass spectrometer inspection

  • SN/T 0736.11-2002 Chemical analysis of fertilizers for import and export.Determination of nitrogen content by auto analyzer
  • SN/T 1672.3-2005 Rules for the inspection of medical equipment for import and export --Part 3: Transcranical Doppler blood flow analyzer
  • SN/T 1737.3-2010 Determination of herbicide residues- Part 3: Determination of cyclohexanediones herbicide residues in foodstuffs for import and export by LC-MS/MS method
  • SN/T 1737.4-2010 Determination of herbicide residues- Part 4: Determination of aryloxyphenoxypropionate herbicide residues in foodstuffs for import and export by GC-MS/MS method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Mass spectrometer inspection

  • GB/T 35655-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography

Danish Standards Foundation, Mass spectrometer inspection

  • DS/EN 1785:2003 Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones
  • DS/EN ISO 11732:2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection
  • DS/EN ISO 23913:2009 Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection
  • DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
  • DS/ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
  • DS/CEN/TR 16468:2013 Food analysis - Determination of pesticide residues by GC-MS - Retention times, mass spectrometric parameters and detector response information

Lithuanian Standards Office , Mass spectrometer inspection

  • LST EN 1785-2003 Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones
  • LST EN ISO 11732:2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005)
  • LST EN ISO 23913:2009 Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006)
  • LST EN 12393-3-2014 Foods of plant origin - Multiresidue methods for the determination of pesticide residues by GC or LC-MS/MS - Part 3: Determination and confirmatory tests

AENOR, Mass spectrometer inspection

  • UNE-EN 1785:2004 Foodstuffs - Detection of irradiated food containing fat - Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones.
  • UNE-EN ISO 11732:2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005)
  • UNE-EN ISO 23913:2010 Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006)

Beijing Provincial Standard of the People's Republic of China, Mass spectrometer inspection

  • DB11/T 1963-2022 Technical specifications for quality control of instant blood gas analysis

Professional Standard - Public Safety Standards, Mass spectrometer inspection

  • GA/T 1008.2-2013 GC and GC-MS examination methods for drugs.Part 2:Morphine
  • GA/T 1008.9-2013 GC and GC-MS examination methods for drugs.Part 9:Estazolam
  • GA/T 1008.4-2013 GC and GC-MS examination methods for drugs.Part 4:Cocaine
  • GA/T 1008.6-2013 GC and GC-MS examination methods for drugs.Part 6:Methadone
  • GA/T 1008.7-2013 GC and GC-MS examination methods for drugs.Part 7:Methaqualone
  • GA/T 1008.8-2013 GC and GC-MS examination methods for drugs.Part 8:Triazolam
  • GA/T 1008.10-2013 GC and GC-MS examination methods for drugs.Part 10:Diazepam
  • GA/T 1008.11-2013 GC and GC-MS examination methods for drugs.Part 11:Bromazepam
  • GA/T 1008.12-2013 GC and GC-MS examination methods for drugs.Part 12:Chlordiazepoxide
  • GA/T 1008.1-2013 GC and GC-MS examination methods for drugs.Part 1:Five components in opium
  • GA/T 1008.3-2013 GC and GC-MS examination methods for drugs.Part 3:Three components in cannabis
  • GA/T 1008.5-2013 GC and GC-MS examination methods for drugs.Part 5:MDMA
  • GA/T 2075.3-2023 Forensic sciences—Examination methods for common ignitable liquid and its residues—Part 3:Thermo desorption-GC/MS
  • GA/T 2075.2-2023 Forensic sciences—Examination methods for common ignitable liquid and its residues—Part 2:Purge and trap-GC/MS
  • GA/T 2075.1-2023 Forensic sciences—Examination methods for common ignitable liquid and its residues—Part 1:Solvent extraction-GC/MS

GOSTR, Mass spectrometer inspection

  • GOST R 8.771-2011 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. The method of verification

American National Standards Institute (ANSI), Mass spectrometer inspection

  • ANSI N42.23-1996 Measurement and Associated Instrumentation Quality Assurance for Radioassay Laboratories

International Electrotechnical Commission (IEC), Mass spectrometer inspection

  • IEC 61290-5-2:2003 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters; Electrical spectrum analyser method
  • IEC 61290-3-1:2003 Optical amplifiers - Test methods - Part 3-1: Noise figure parameters; Optical spectrum analyzer method
  • IEC 61290-1-1:2020 RLV Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • IEC 61290-3-2:2003 Optical amplifiers - Part 3-2: Test methods for noise figure parameters; Electrical spectrum analyzer method
  • IEC 61290-1-1:2015 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • IEC 61290-1-1:2006 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
  • IEC 61290-10-2:2003 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters; Pulse method using a gated optical spectrum analyzer
  • IEC 61290-1-2:2005 Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
  • IEC 61290-10-2:2007 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
  • IEC 61290-5-3:2002 Optical fibre amplifiers - Basic specifications - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance test method using electrical spectrum analyzer
  • IEC 61290-10-1:2003 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters; Pulse method using an optical switch and optical spectrum analyzer
  • IEC 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyser

Professional Standard - Hygiene , Mass spectrometer inspection

  • WS/T 406-2012 Analytical quality specifications for routine tests in clinical hematology
  • WS/T 403-2012 Analytical quality specifications for routine analytes in clinical biochemistry

IT-UNI, Mass spectrometer inspection

CENELEC - European Committee for Electrotechnical Standardization, Mass spectrometer inspection

  • EN 61290-5-1:2000 Optical Fibre Amplifiers - Basic Specification - Part 5-1: Test Methods for Reflectance Parameters - Optical Spectrum Analyser
  • EN 61290-1-2:1998 Optical Fibre Amplifiers - Basic Specification Part 1-2: Test Methods for Gain Parameters Electrical Spectrum Analyzer

IN-BIS, Mass spectrometer inspection

Liaoning Provincial Standard of the People's Republic of China, Mass spectrometer inspection

  • DB21/T 1861.1-2010 Isoenzyme electrophoresis analysis method for water product germplasm inspection technical regulations

国家卫生计生委, Mass spectrometer inspection

  • WS/T 494-2017 Analysis quality requirements for important routine items in clinical qualitative immunoassay testing

European Committee for Electrotechnical Standardization(CENELEC), Mass spectrometer inspection

  • EN 61290-5-2:2004 Optical amplifiers Test methods Part 5-2: Reflectance parameters Electrical spectrum analyser method
  • EN 61290-5-1:2006 Optical amplifiers - Test methods Part 5-1: Reflectance parameters - Optical spectrum analyzer method
  • EN 61290-3-1:2003 Optical amplifiers Test methods Part 3-1: Noise figure parameters Optical spectrum analyzer method
  • EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer

Agricultural Standard of the People's Republic of China, Mass spectrometer inspection

  • 农业部1782号公告-12-2012 Food safety detection of genetically modified organisms and derived products.Methods for analysis of amino acid sequence of protein by MALDI-TOF-MS

BELST, Mass spectrometer inspection

  • STB 8048-2015 System for ensuring the uniformity of measurements of the Republic of Belarus. Analyzers of consecutive action spectrum. Methods of verification

ES-UNE, Mass spectrometer inspection

  • UNE-EN 17212:2020 Animal Feeding stuffs - Methods of sampling and analysis - Determination of melamine and cyanuric acid content by liquid chromatographic method with mass spectrometric detection (LC-MS/MS)

Professional Standard - Energy, Mass spectrometer inspection

  • NB/SH/T 0940-2016 Test method for the analysis of in-use lubricants using a specific 4-in-1 tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity and Laser Particle Counter)

国家能源局, Mass spectrometer inspection

  • SH/T 0940-2016 Test methods for analyzing in-service lubricants using specific four-in-one testers (atomic emission spectrometry, infrared spectroscopy, viscosity and laser particle counter)

PT-IPQ, Mass spectrometer inspection

  • NP EN 1784-2000 Foodstuffs Detection of irradiated food containing fat Gas chromatographic analysis of hydrocarbons

Standard Association of Australia (SAA), Mass spectrometer inspection

  • AS ISO 18118:2006 Surface chemical analysis - Auger electron spectroscopy and X-ray photoelectron spectroscopy - Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materials




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved