ZH
RU
ES

Standard series concentration

Standard series concentration, Total:500 items.

In the international standard classification, Standard series concentration involves: Products of the textile industry, Processes of the textile industry, Medical sciences and health care facilities in general, Sensory analysis, Organic chemicals, Structures of buildings, Farming and forestry, Food products in general, Air quality, Flexible drives and transmissions, Construction materials, Adhesives, Water quality, Environmental protection, Nuclear energy engineering, Protection against fire, Environmental testing, Explosion protection, General methods of tests and analysis for food products, Fuels, Insulating materials, Plastics, Iron and steel products, Aerospace fluid systems and components, Non-ferrous metals, Radiation measurements, Clothes, Cutting tools, Occupational safety. Industrial hygiene, Aerospace electric equipment and systems, Biology. Botany. Zoology, Power transmission and distribution networks, Software development and system documentation, Thermodynamics and temperature measurements, Measurement of fluid flow, Paints and varnishes, Shipbuilding and marine structures in general, Alarm and warning systems, Vocabularies, CHEMICAL TECHNOLOGY, Sterilization and disinfection, Metrology and measurement in general, Protection against dangerous goods, Inorganic chemicals, On-board equipment and instruments, Testing of metals, Machine tools, Electromagnetic compatibility (EMC), Fasteners for aerospace construction, Measurement of volume, mass, density, viscosity, Microbiology, Lubricants, industrial oils and related products, Analytical chemistry, Coatings and related processes used in aerospace industry, Electrical wires and cables, Shafts and couplings, Ergonomics, Equipment for the chemical industry, Aircraft and space vehicles in general, Sports equipment and facilities, Fasteners, Wood, sawlogs and sawn timber, Test conditions and procedures in general, Paper and board, Textile fibres, Passenger and cabin equipment, Graphical symbols, Technical drawings, Law. Administration, Hydraulic energy engineering, Interface and interconnection equipment, Ceramics, Elements of buildings, Safety of machinery, Fluid storage devices, Bearings, Wastes, Refractories, Inland navigation vessels, Products of the chemical industry, Materials for aerospace construction, Electronic components in general.

Japanese Industrial Standards Committee (JISC), Standard series concentration

JIS L 0808:1994 Standard depths of colour
JIS L 0810:1973 Standard depths of shade no.3
JIS L 0812:1973 Standard depths of shade no.5

Korean Agency for Technology and Standards (KATS), Standard series concentration

KS K 0908-2011 Standard depths of shade NO. 1
KS B ISO 4183:2010 Grooved pulleys for narrow V belts
KS B ISO 4183:2013 Grooved pulleys for narrow V belts
KS B ISO 7091-2005(2020) Plain washers－Normal series－Product grade C
KS B ISO 7089-2005(2020) Plain washers－Normal series－Product grade A
KS A 0061-2015(2020) Specification of colours according to the CIE 1931 standard colorimetric system and the CIE 1964 supplementary standard colorimetric system
KS A 0061-1998 Specification of colours according to the CIE 1931 standard colorimetric system and the CIE 1964 supplementary standard colorimetric system
KS A 0061-1983 Specification of colours according to the CIE 1931 standard colorimetric system and the CIE 1964 supplementary standard colorimetric system

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard series concentration

GB/T 16146-1995 Standards for controlling radon concentration in dwellings
GB 14882-1994 Limited concentrations of radioactive materials in foods
GB/T 27752-2011 Validation of the strength of uranium reference solution, plutonium reference solution and potassium dichromate reference solution
GB/T 21844-2008 Standard test method for concentration limits of flammability of chemicals(vapors and gases)
GB/T 10813.1-1989 Standard of celadon Rorcelain ware series--Celadon Porcelain ware for daily use
GB 19613-2004 Concentration limitations of pollutants in surface water for the destruction of abandoned chemical weapons by Japan in China
GB 19614-2004 Concentration limitations of pollutants in ground water for the destruction of abandoned chemical weapons by Japan in China
GB 19612-2004 Concentration limitation of air pollutants for the destruction of abandoned chemical weapons by Japan in China

(U.S.) Ford Automotive Standards, Standard series concentration

FORD M3C99-B-1991 SOLUBLE OIL CONCENTRATE Shown on M3C99-A
FORD WSS-M99C127-A2-2009 ADDITIVE, CERIUM/IRON BASED FOR USE WITH DIESEL PARTICULATE FILTERS 8.0% CERIUM/IRON CONCENTRATION ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99C127-A1)
FORD WSS-M99C127-A3-2009 ADDITIVE, CERIUM/IRON BASED FOR USE WITH DIESEL PARTICULATE FILTERS 6.5% CERIUM/IRON CONCENTRATION ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M99C127-A1)
FORD ESF-M2C143-A2-2004 LUBRICATING OIL, HIGH TEMPERATURE, P/M IMPREGNATING, THICKENED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M2C143-A
FORD ESF-M2C143-A3-2004 LUBRICATING OIL, HIGH TEMPERATURE, P/M IMPREGNATING, THICKENED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M2C143-A
FORD ESF-M2C143-A2-2009 LUBRICATING OIL, HIGH TEMPERATURE, P/M IMPREGNATING, THICKENED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2C143-A3-2009 LUBRICATING OIL, HIGH TEMPERATURE, P/M IMPREGNATING, THICKENED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G404-A2-2003 ADHESIVES, CYANOACRYLATE, (CA), THICKENED, TOUGHENED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G401-A1)
FORD WSK-M2G404-A3-2003 ADHESIVES, CYANOACRYLATE, (CA), THICKENED, TOUGHENED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G401-A1)
FORD WSK-M2G404-A4-2003 ADHESIVES, CYANOACRYLATE, (CA), THICKENED, TOUGHENED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G401-A1)
FORD WSK-M2G404-A5-2003 ADHESIVES, CYANOACRYLATE, (CA), THICKENED, TOUGHENED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G401-A1)
FORD WSS-M99B188-A2-2009 ACETAL COPOLYMER (POM) COLOR PIGMENT CONCENTRATE, MEDIUM GRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99B188-A3-2009 ACETAL COPOLYMER (POM) COLOR PIGMENT CONCENTRATE, LIGHT BLUE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99B188-A4-2009 ACETAL COPOLYMER (POM) COLOR PIGMENT CONCENTRATE, LIGHT GREEN ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99B188-A5-2009 ACETAL COPOLYMER (POM) COLOR PIGMENT CONCENTRATE, BRIGHT YELLOW ***TO BE USED WITH FORD WSS-M99P1111-A***

American Society for Testing and Materials (ASTM), Standard series concentration

ASTM E679-04 Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
ASTM E679-91(1997) Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
ASTM E679-04(2011) Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
ASTM E679-19 Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
ASTM D2194-02(2012) Standard Test Method for Concentration of Formaldehyde Solutions
ASTM D2194-22 Standard Test Method for Concentration of Formaldehyde Solutions
ASTM E544-99 Standard Practices for Referencing Suprathreshold Odor Intensity
ASTM E544-99(2004) Standard Practices for Referencing Suprathreshold Odor Intensity
ASTM E544-10 Standard Practices for Referencing Suprathreshold Odor Intensity
ASTM D1583-01(2018) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D3977-97(2013) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D1583-01 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM D1583-00 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM E3242-20 Standard Guide for Determination of Representative Sediment Background Concentrations
ASTM D1583-01(2013) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
ASTM G128-95 Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
ASTM G128-02(2008) Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM C187-11e1 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
ASTM E1515-03 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM E681-01 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM E1515-14(2022) Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM D3977-97(2019) Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM D3977-97(2013)e1 Standard Test Methods for Determining Sediment Concentration in Water Samples
ASTM E1515-14 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM E2079-01 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
ASTM E2079-00 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
ASTM C1785-16a Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
ASTM D8062-23 Standard Specification for Purified Terephthalic Acid (PTA) with Low p-Toluic Acid
ASTM C1514-08(2017) Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM D789-18 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
ASTM D789-19 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
ASTM E1515-00 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM C1514-02 Standard Test Method for Measurement of ²³⁵U Fraction using the Enrichment Meter Principle
ASTM E2931-13(2019) Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
ASTM F862-11(2017) Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM D8451-22 Standard Test Method for Calculation of Unfixed Chrome Concentration in Wet Blue
ASTM C1343-11 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
ASTM D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
ASTM E1515-07 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
ASTM D6258-98(2003)e1 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM D6258-98e1 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM E2931-13 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
ASTM D6258-17 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM E1242-97(2003) Standard Practice for Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis
ASTM E1242-97(2008) Standard Practice for Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis
ASTM D4490-96 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D5462-01 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
ASTM D5835-95 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D5835-95(2001) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM E681-85 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM E681-98 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM E2079-19 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
ASTM E207-08(2015) Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM E207-08(2015)e1 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
ASTM D5462-21 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water
ASTM D7512-09 Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
ASTM E1242-97(2014) Standard Practice for Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis
ASTM D3624-85a(2005) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2005) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D4599-03 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D4599-97 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D3717-85a(2005) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(2010) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2010) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2010) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D459-08 Standard Terminology Relating to Soaps and Other Detergents
ASTM D459-08a Standard Terminology Relating to Soaps and Other Detergents
ASTM D4599-14 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D4599-03(2009)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM E1891-21 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E681-04 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM E2079-07 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
ASTM D6258-04 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM D4490-23 Red Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors (Standard + Redline PDF Bundle)
ASTM D4490-96(2001)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM E681-09(2023) Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM E681-09(2015) Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM F862-11(2022) Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM D7821-12(2018) Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
ASTM D4490-23 Standard Practice for the Use of Detector Tubes in the Measurement of Toxic Gases and Vapors
ASTM D4490-96(2016) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D4490-96(2011) Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D6258-09(2014) Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels
ASTM E1413-06 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM C1625-05 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM D6007-02(2008) Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
ASTM D4599-20 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D4599-21 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D8027-17 Standard Practice for Concentration of Select Radionuclides Using MnO2 for Measurement Purposes
ASTM D7042-11 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM E1891-10a Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM D4490-96(2006)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM C1514-08 Standard Test Method for Measurement of ²³⁵U Fraction Using Enrichment Meter Principle
ASTM E2657-21 Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
ASTM E2079-07(2013) Standard Test Methods for Limiting Oxygen 40;Oxidant41; Concentration in Gases and Vapors
ASTM E2657-16 Standard Practice for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
ASTM D5835-20 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM E2250-02 Standard Method for Determination of Endotoxin Concentration in Water Miscible Metal Working Fluids
ASTM C1785-15 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
ASTM D6071-96(2000) Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D6071-96 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM C1625-12 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM B800-05(2015) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes&x2014;Annealed and Intermediate Tempers
ASTM D3627-96 Standard Test Method for Color of Cresylic Acids ("C" Series Standards)
ASTM E1891-97(2002) Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1891-97 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1891-10 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM D6782-02 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
ASTM C1625-19 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM E611-08(2015) Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
ASTM D5149-95 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
ASTM D5149-02 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
ASTM D6058-96(2006) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM D6582-00(2005)e1 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D3718-85a(1999) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(1999) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(1999) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM E611-03 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
ASTM D6058-96(2001) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM D6058-96 Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM D6582-00 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM F862-11 Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
ASTM D3624-85a(2022) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2022) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D6582-00(2005) Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D3718-85A(2022)e1 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3624-85a(2015) Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
ASTM D3717-85a(2015) Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
ASTM D3718-85a(2015) Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D8027-16 Standard Practice for Concentration of Select Radionuclides Using MnO2 for Measurement Purposes
ASTM D778-97(2007) Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot-Extraction and Cold-Extraction Procedures)
ASTM D5149-02(2016) Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
ASTM D5835-95(2013) Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations
ASTM D5149-02(2008) Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
ASTM D7042-16e1 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM D7042-10 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM B800-00 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
ASTM B800-05(2021) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
ASTM E1242-23 Standard Practice for Using Octanol-Water Partition Coefficient to Estimate Median Lethal Concentrations for Fish Due to Narcosis
ASTM D4840-99(2004) Standard Guide for Sampling Chain-of-Custody Procedures
ASTM D4840-99 Standard Guide for Sampling Chain-of-Custody Procedures
ASTM D7042-12 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
ASTM F2591-06(2022) Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
ASTM D4913-00 Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
ASTM D4913-00(2011) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
ASTM D4913-00(2016) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
ASTM D6245-07 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
ASTM D2863-10 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
ASTM D6058-96(2011) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM E2657-11 Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids
ASTM D2863-12 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
ASTM D2863-12e1 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
ASTM F3414-20 Standard Test Method for Determining Ortho-Phthalate Concentration in Flooring Containing Polyvinyl Chloride
ASTM D2863-13 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics lpar;Oxygen Indexrpar;
ASTM D6058-96(2016) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
ASTM C861-93(2000) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
ASTM C861-93(2020) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
ASTM D1122-20 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D1440-96(2002) Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method)
ASTM D1440-96 Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method)
ASTM D1440-77(1982) Standard Test Method for Length and Length Distribution of Cotton Fibers (array Method)
ASTM D1440-07(2019) Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method)
ASTM D1440-07(2012) Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method)
ASTM C1343-96(2002) Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence
ASTM C1343-96 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-Ray Fluorescence
ASTM D6007-02 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
ASTM D6007-96 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
ASTM D6764-02 Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
ASTM D3335-85a(2005) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM D6245-98 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
ASTM D6245-98(2002) Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
ASTM D6764-02(2007) Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
ASTM D3335-85a(2009) Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM D7872-13(2018) Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
ASTM E3344-22 Standard Guide for Selection of Background Reference Areas for Determination of Representative Sediment Background Concentrations
ASTM E611-08(2015)e1 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
ASTM D6764-02(2013) Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels
ASTM D6245-12 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
ASTM D778-97(2002) Standard Test Methods for Hydrogen Ion Concentration (pH) of Paper Extracts (Hot- Extraction and Cold-Extraction Procedures)
ASTM D7872-13(2022) Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
ASTM D6245-18 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
ASTM D6007-22 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
ASTM D7872-13 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
ASTM D6007-14 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber

American National Standards Institute （ANSI), Standard series concentration

ANSI/SJI LH/DLH-2010 Standard Specifications for Longspan Steel Joists, LH-Series, and Deep Longspan Steel Joists, DLH-Series
ANSI/IEEE 824:2004 Standard for Series Capacitors in Power Systems
ANSI/SJI JG-2010 Standard Specification for Joist Girders, JG-Series
ANSI/VITA 41.2-2006 VXS 4X Serial Rapid IO Layer Protocol Standard
ANSI/SJI CJ-2010 Standard Specifications for Composite Steel Joists, CJ-Series
ANSI/SJI K-2010 Standard Specifications for Open Web Steel Joists, K-Series

Group Standards of the People's Republic of China, Standard series concentration

T/CPPC 1047-2022 Hemoglobin concentration standard for healthy lean pigs
T/HEBQIA 051-2021 A series of standardized assembled high weather resistance tanks

International Organization for Standardization (ISO), Standard series concentration

ISO 4183:1995 Belt drives - Classical and narrow V-belts - Grooved pulleys (system based on datum width)
ISO/TR 10652:1991 Standard sizing systems for clothes
ISO/TR 11064-10:2020 Ergonomic design of control centres — Part 10: Introduction to the control room design series of standards
ISO/TR 23107:2019 Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series
ISO 7089:1983 Plain washers; Normal series; Product grade A
ISO 7091:1983 Plain washers; Normal series; Product grade C
ISO/IEC 14143-6:2012 Information technology - Software measurement - Functional size measurement - Part 6: Guide for use of ISO/IEC 14143 series and related International Standards

RO-ASRO, Standard series concentration

STAS SR ISO 10275-1:1997 PI aste rs - General specification sample preparing, preparation of normal consistency paste and determination of white degree
STAS 2285/1-1981 Normal angles SER IES OF CONICAL TAPERS AND TAPER ANGLES
STAS 10792-1989 INTERNATIO NAL STANDARD SERIAL NUMBKRING (ISSN)

Jiangxi Provincial Standard of the People's Republic of China, Standard series concentration

DB36/T 561-2018 Main scale series of standard ship type for ships passing through locks

German Institute for Standardization, Standard series concentration

DIN EN 14625:2012-12 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German version EN 14625:2012 / Note: To be replaced by DIN EN 14625 (2022-11).
DIN EN 14625:2022-11 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German and English version prEN 14625:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14625 (2012-12).
DIN EN 16966:2019 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
DIN EN 14212 Berichtigung 1:2014-08 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence; German version EN 14212:2012, Corrigendum to DIN EN 14212:2012-11 / Note: To be replaced by DIN EN 14212 (2022-11).
DIN EN 14212:2012-11 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence; German version EN 14212:2012 / Note: To be replaced by DIN EN 14212 (2022-11).
DIN EN 14212:2022-11 Ambient air - Standard method for the measurement of the concentration of sulfur dioxide by ultraviolet fluorescence; German and English version prEN 14212:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14212 (2012-11), DIN EN...
DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
DIN EN 4165-003:2008 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard; German and English version EN 4165-003:2008
DIN EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
DIN EN 14791:2017-05 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method; German version EN 14791:2017
DIN EN 15549:2008-06 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
DIN EN 14789:2017-05 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism; German version EN 14789:2017
DIN EN 4165-003:2016-08 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard; German and English version EN 4165-003:2016
DIN EN 4723:2015 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats; German and English version EN 4723:2015
DIN EN 4723:2015-12 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats; German and English version EN 4723:2015
DIN EN 14625:2012 Ambient air.Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German version EN 14625:2012
DIN EN 4617:2008-02 Aerospace series - Recommended practices for standardising company standards; German and English version EN 4617:2006
DIN EN 3149:1996 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard; German version EN 3149:1996
DIN EN ISO 7089:2000 Plain washers - Normal series, Product grade A (ISO 7089:2000); German version EN ISO 7089:2000
DIN EN ISO 7091:2000 Plain washers - Normal series, Product grade C (ISO 7091:2000); German version EN ISO 7091:2000
DIN EN 14626:2022-11 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German and English version prEN 14626:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14626 (201...
DIN EN 14626:2012-12 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012 / Note: To be replaced by DIN EN 14626 (2022-11).
DIN CEN/TS 17340:2021-01 Stationary source emissions - Determination of mass concentration of fluorinated compounds expressed as HF - Standard reference method; German version CEN/TS 17340:2020

National Health Commission of the People's Republic of China, Standard series concentration

GB 5009.225-2016 Determination of ethanol concentration in national food safety standard wine

Lithuanian Standards Office , Standard series concentration

LST EN 14625-2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
LST EN 15549-2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
LST EN 14212-2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
LST EN 4165-003-2008 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard
LST EN 4617-2006 Aerospace series - Recommended practices for standardising company standards
LST EN 2859-2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1 100 MPa (at ambient temperature) / 235 °C
LST EN 2550-2002 Aerospace series - Rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series
LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
LST EN 14626-2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy

Danish Standards Foundation, Standard series concentration

DS/EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
DS/EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
DS/EN 50370-2:2003 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity
DS/EN 14212:2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
DS/EN 4165-003:2008 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard
DS/ISO 7089:1986 Plain washers. Normal series. Product grade A
DS/EN 4617:2006 Aerospace series - Recommended practices for standardising company standards
DS/EN 2859:2006 Aerospace series – Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series – Classification: 1 100 MPa (at ambient temperature) / 235 °C
DS/ISO 7091:1986 Plain washers. Normal series. Product grade C
Standardpakke - CE-mærkning af pyrotekniske artikl Standards Package – Pyrotechnic articles – The DS/EN 15947 series
DS/EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy

AENOR, Standard series concentration

UNE-EN 14625:2013 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
UNE-EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
UNE-EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
UNE-EN 50370-2:2004 Electromagnetic compatibility (EMC) - Product family standard for machine tools -- Part 2: Immunity
UNE-EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
UNE-EN 14212:2013 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
UNE 25192:1967 SELECTIVE LIST OF ARTICULATIONS. STANDARDIZED SERIES OF AXE DIAMETERS.
UNE-EN 2550:1993 AEROSPACE SERIES. RIVETS, SOLID, 100o NORMAL COUNTERSUNK HEAD, IN ALUMINIUM 1050A, INCH BASED SERIES.
UNE-EN 3612:1997 AEROSPACE SERIES. UNDERCUTS FOR SPLINES. DESIGN STANDARD.
UNE-EN 14626:2013 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
UNE-EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter

Underwriters Laboratories (UL), Standard series concentration

UL 331A-2015 UL Standard for Safety Strainers for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations Up to 85 Percent (E0 �C E85) (First Edition)
UL 2775-2014 UL Standard for Safety Fixed Condensed Aerosol Extinguishing System Units (First Edition; Reprint with revisions through and including August 5, 2016)

European Association of Aerospace Industries, Standard series concentration

AECMA TR 2410-1996 Luft- Und Raumfahrt Metallische Werkstoffe Querverweis Zwischen Den Mabnormen Und Den Normen Uber Werkstoffe Aerospace Series Metallic Materials Relationship Between Dimensional Standards and Material Standards Serie aerospatiale Materiaux Metalliques Co
AECMA PREN 3112-1987 Screws, Hexagonal Normal Head, Fully Threaded in Steel, Cadmium Plated Classification 900 MPa/235 Degrees Celsius
AECMA PREN 3112-1994 Aerospace Series Bolts, Normal Hexagonal Head, Threaded to Head, in Alloy Steel, Cadmium Plated Classification: 900 MPa (at Ambient Temperature)/235 Degrees C Edition P 2
AECMA PREN 3782-1992 Aerospace Series Holes for 100 Degrees Countersunk Head Screws Design Standard Issue P 1
AECMA PREN 3113-1999 Aerospace Series Screws, Hexagonal Normal Head, Fully Threaded, in Titanium Alloy Anodized Classification: 900 MPa/315 Degrees C Edition P 2; Withdrawn - Not Replaced
AECMA PREN 3419-1990 Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Nickel Base Alloy NI-P11, Metric Series
AECMA PREN 3419-1991 Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Nickel Base Alloy NI-P11, Metric Series Issue P 1
AECMA PREN 3421-1995 Aerospace Series Rivets, Solid, 100 Degrees Countersunk Normal Head, in Corrosion Resisting Steel FE-PA11, Passivated, Metric Series Edition P 1
AECMA PREN 2267-003-1991 Aerospace Series Electrical Cables for General Use Operating Temperatures between -55 and +260 Degrees Celsius Product Standard
AECMA PREN 2895-1993 Aerospace Series Nuts, Hexagonal, Plain, Normal Height, Normal Across Flats, in Corrosion Resisting Steel, Passivated Classification : 900 MPa (at Ambient Temperature) / 425 Degrees C Edition P 1
AECMA PREN 6123-2003 Aerospace Series Fitting End, 24 Degrees Internal cone, External Thread, Flareless Type Extra Fine Thread Pitch Inch Series Design Standard Edition P 1
AECMA PREN 6123-2006 Aerospace series Fitting end, 24?internal cone, external thread, flareless type Extra fine thread pitch Inch series Design standard Edition P 2
AECMA PREN 3418-1990 Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Nickel Base Alloy NI-P11, Cadmium Plated, Metric Series
AECMA PREN 3418-1991 Aerospace Series Rivets, Solid, 100 Degree Normal Countersunk Head, in Nickel Base Alloy NI-P11, Cadmium Plated, Metric Series Issue P 1
AECMA PREN 3423-1995 Aerospace Series Rivets, Solid, 100 Degrees Countersunk Normal Head, in Titanium TI-P02, Anodized, Metric Series Edition P 1
AECMA PREN 3582-1991 Aerospace Series Standard-Weight PTFE Flexible Hose Assembly of a Nominal Pressure Equal to 21000 kPa with 24 Degree Fitting in Titanium Product Standard

CEN - European Committee for Standardization, Standard series concentration

EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration@ surface area concentration and mass concentration
EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
EN 14212:2005 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
PREN 17346-2019 Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling
EN ISO 10673:2009 Plain washers for screw and washer assemblies - Small@ normal and large series - Product grade A

Association Francaise de Normalisation, Standard series concentration

NF X43-602*NF EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
NF EN 14625:2013 Air ambiant - Méthode normalisée de mesurage de la concentration en ozone par photométrie U.V
NF EN 4617:2006 Série aérospatiale - Normaliser les standards d'entreprise
NF E66-217:1977 SLOT DRILL WITH PARALLEL SHANKS. SHORT SERIES AND STANDARD SERIES.
NF E66-218:1977 SLOT DRILLS WITH MORSE TAPER SHANK. SHORT SERIES AND STANDARD SERIES.
NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
NF L24-505*NF EN 3226:2010 Aerospace series - Nuts, hexagon, plain, normal height, normal across flats,steel, cadmium plated - Classification : 1 100 MPa/235oC
NF X43-064*NF EN 14625:2013 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
NF E66-210:1977 SLOT DRILLS WITH 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.
NF L54-110-003:2008 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 003 : Modules series 2 and series 3 - Product standard.
NF X43-372*NF EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
NF EN 14791:2017 Émissions de sources fixes - Détermination de la concentration massique des oxydes de soufre - Méthode de référence normalisée
NF EN 14212:2013 Air ambiant - Méthode normalisée pour le mesurage de la concentration en dioxyde de soufre par fluorescence UV
NF EN 15549:2008 Qualité de l'air - Méthode normalisée pour le mesurage de la concentration du benzo[a]pyrene dans l'air ambiant
NF E25-600:1984 Fasteners. Wood screws family standard.
NF EN 50370-2:2003 Compatibilité électromagnétique (CEM) - Norme de famille de produits pour les machines-outils - Partie 2 : immunité
NF L20-030*NF EN 3149:1996 Aerospace series. Shank nuts. Installation holes, 60 degrees swage, flanges. Design standard.
NF X43-560*NF EN 15549:2008 Air quality - Standard method for the measurement of the concentration of Benzo[a]pyrene in ambient air
NF X43-370*NF EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method : Paramagnetism
NF EN 14789:2017 Émissions de sources fixes - Détermination de la concentration volumique en oxygène - Méthode de référence normalisée : paramagnétisme
NF L54-110-003*NF EN 4165-003:2016 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 003: Modules series 2 and series 3 - Product standard
NF EN 4165-003:2016 Série aérospatiale - Connecteurs électriques rectangulaires, modulaires - Température d'utilisation 175 oC continu - Partie 003 : Modules série 2 et série 3 - Norme de produit
NF E66-211:1977 END MILLS WITH PARALLEL SHANKS. STANDARD SERIES AND LONG SERIES.
NF EN 3149:1996 Série aérospatiale - Écrous à sertir - Trous d'installation, sertissage 60 degrés, brides - Norme de conception.
NF E22-051:1970 Cylindrical shaft ends.long series (normal).
NF L61-023*NF EN 4723:2016 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats
NF L52-275-010:2014 Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 oC and 260 oC - Part 010 : DR family, single UV laser printable - Product standard
NF L54-110-013:2006 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 013 : cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product Standard.
NF L54-110-014*NF EN 4165-014:2006 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 oC continuous - Part 014 : shielded accessory body, 2 and 4 modules, for connectors series 2 and series 3 - Product standard.
NF E66-212:1977 END MILLS WITH MORSE TAPER SHANK. STANDARD SERIES AND LONG SERIES.
NF L24-105*NF EN 2887:1995 Aerospace series. Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated. Classification : 600 MPa (at ambient temperature) / 425 degrees celsius.
NF L24-103*NF EN 2549:2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1100 MPa (at ambient temperature)/315oC
NF L24-132*NF EN 2654:1996 Aerospace series. Screws, 100 degrees countersunk normal head, slotted, threaded to head, in brass, tin plated. Classification : 380 MPa (at ambient tmeperature) / 80 degrees celsius.
NF EN 2267-010:2018 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 010 : famille DR, fil simple marquable au laser UV - Norme de produit
NF E25-515:2009 Single coil spring washers - Standard series - Symbol W.
NF E25-526*NF EN ISO 7089:2000 Plain washers - Normal series - Product grade A.
NF E25-528*NF EN ISO 7091:2000 Plain washers - Normal series - Product grade C
NF E25-100:1985 FASTENERS. SCREWS FAMILY STANDARD.
NF L24-131*NF EN 2653:1996 Aerospace series. Screws, 100 degrees countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated. Classification : 600 MPa (at ambient temperature) / 425 degrees celsius.
NF E66-209:1977 END MILLS 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.
NF X43-320*NF EN 1911:2010 Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method.
NF CEN/TS 17340:2020 Emissions de sources fixes - Détermination de la concentration massique en composés fluorés, exprimée en HF - Méthode de référence normalisée
NF EN 2267-009:2017 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre -55 oC et 260 oC - Partie 009 : famille DRA, fil simple et éléments assemblés - Norme de produit
NF EN 2346-003:2006 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 003 : famille DL, fil simple - Norme de produit
NF L00-014*NF EN 4617:2006 Aerospace series - Recommanded parctices for standardising compagny standards
NF L21-321*NF EN 2550:1993 Aerospace series. Rivets, solid, 100 degrees normal countersunk head, in aluminium 1050A, inch based series.
NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
NF X43-062*NF EN 14212:2013 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
NF X43-373*NF EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method : chemiluminescence
NF EN 14792:2017 Émissions de sources fixes - Détermination de la concentration massique des oxydes d'azote - Méthode de référence normalisée : chimiluminescence

British Standards Institution (BSI), Standard series concentration

22/30450365 DC BS EN 14625. Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS EN 14625:2012 Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS EN 4165-003:2008 Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature 175 °C continuous — Part 003: Modules series 2 and series 3 — Product standard
BS EN 4165-003:2016 Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 C continuous. Modules series 2 and series 3. Product standard
BS EN 17346:2020 Ambient air. Standard method for the determination of the concentration of ammonia using diffusive samplers
BS EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo(a)pyrene in ambient air
BS EN 3226:2010 Aerospace series. Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated. Classification: 1100 MPa/235C
BS EN 3226:2009 Aerospace series - Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated - Classification: 1100 MPa/235 °C
19/30367217 DC BS EN 17346. Ambient Air Quality. Standard method for the determination of the concentration of ammonia by diffusive sampling
BS EN 14212:2012 Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN 14212:2012(2014) Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN 1911:2010 Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method
BS EN 2852:2010 Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated - Classification: 1100 MPa/650 °C
BS PD 308:1996 Guide to the European Standards for engineering drawing in the BS EN series
PD 308-1996 Guide to the European standards for engineering drawing in the BS EN series
BS EN 4617:2006 Recommended practices for standardizing company standards
22/30450996 DC BS EN 14212. Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
PD CEN/TS 17340:2020 Stationary source emissions. Determination of mass concentration of fluorinated compounds expressed as HF. Standard reference method
BS EN 3139:2001 Aerospace series - Rivets, solid, 100 ° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based series
BS EN 2825:2011 Aerospace series. Burning behaviour of non metallic materials under the influence of radiating heat and flames. Determination of smoke density
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS EN 14212:2005 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
BS EN 14791:2017 Tracked Changes. Stationary source emissions. Determination of mass concentration of sulphur oxides. Standard reference method

Professional Standard - Tobacco, Standard series concentration

YC/T 169.5-2002 Testing physical and chemical characteristics of tow for cigarette----Part 5: Breaking strength
YC/T 169.1-2002 Testing physical and chemical characteristics of tow for cigarette----Part 1: Total line density
YC/T 169.2-2002 Testing physical and chemical characteristics of tow for cigarette----Part 2: Linear density of filament

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Standard series concentration

PREN 3401-1992 Aerospace Series Rivets@ Solid@ 100 Degree Normal Countersunk Head@ in Aluminium Alloy 7050@ Metric Series (Issue P 1)
PREN 3413-1990 Aerospace Series Rivets@ Solid@ 100 Degree Normal Countersunk Head with Dome@ in Aluminium Alloy 7050@ Metric Series
PREN 3782-1992 Aerospace Series Holes for 100 Degrees Countersunk Head Screws Design Standard (Issue P 1)
PREN 2553-1999 Aerospace Series Rivets@ Solid@ 100 Degree Normal Countersunk Head with Dome@ in Aluminium Alloy 2017A@ Inch Based Series (Edition 2)
PREN 2267-003-1991 Aerospace Series Electrical Cables for General Use Operating Temperatures between -55 and +260 Degrees Celsius Product Standard
PREN 2550-1989 Aerospace Series Rivets@ Solid@ 100 Degrees Normal Countersunk Head@ in Aluminium EN 2114
PREN 3396-1991 Aerospace Series Rivets@ Solid@ 100 Degree Normal Countersunk Head with Dome@ in Aluminium Alloy 5056A@ Metric Series (Issue P 1)
PREN 3413-1992 Aerospace Series Rivets@ Solid@ 100 Degree Normal Countersunk Head with Dome@ in Aluminium Alloy 7050@ Metric Series (Issue P 1)
PREN 2346-003-2001 Aerospace Series Cable@ Electrical@ Fire Resistant Operating Temperatures between -65 Degrees C and 260 Degrees C Part 003: DL Family@ Single Core Product Standard (Issue P 1)
PREN 6123-2003 Aerospace Series Fitting End@ 24 Degrees Internal cone@ External Thread@ Flareless Type Extra Fine Thread Pitch Inch Series Design Standard (Edition P 1)
PREN 4165-003-2014 Aerospace series Connectors@ electrical@ rectangular@ modular Operating temperature 175 °C continuous Part 003: Modules series 2 and series 3 Product standard (Edition P 3)
PREN 3226-1992 Aerospace Series Nuts@ Hexagon@ Plain@ Normal Height@ Normal Across Flats@ in Steel@ Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius (Edition P 1)
PREN 4165-003-2001 Aerospace Series Connectors@ Electrical@ Rectangular@ Modular Operating Temperature 175 Degrees C Continuous Part 003: Modules Series 2 and Series 3 Product Standard (Edition P 1;:2001 Edition P 2)
PREN 2267-007-1998 Aerospace Series Cables@ Electrical@ for General Purpose Operating Temperatures between -55 Degrees Celsius and 260 Degrees Celsius Part 007: DM Family@ Single and Multicore Assembly Product Standard
PREN 3138-2001 Aerospace Series Rivets@ Solid@ 100 Degree Countersunk Normal Head with Dome@ in Corrosion Resisting Steel FE-PA92HT@ Passivated@ Inch Based Series (Edition P 2)

VN-TCVN, Standard series concentration

TCVN 5782-2009 Standard sizing systems for clothes

International Telecommunication Union (ITU), Standard series concentration

ITU-T VOLUME 1X Protection Against Interference - Series K Recommendations Construction, Installation and Protection of Cable and Other Elements of Outside Plant - Series L Recommendations
ITU-T V.92-2000 Enhancement to Recommendation V.90 Series V: Data Communication over the Telephone Network Simultaneous Transmission of Data and Other Signals Study Group 16

European Committee for Standardization (CEN), Standard series concentration

EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
EN 4560:2015 Aerospace series - Pipe coupling 37°, spherical up to 21000 kPa - Inch series - Technical specification
EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
EN 4165-003:2008 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard
EN 14212:2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
CEN EN 15549-2008 Air quality — Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
EN 3745-601:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density
EN 4165-003:2016 Aerospace series - Connectors@ electrical@ rectangular@ modular - Operating temperature 175 ��continuous - Part 003: Modules series 2 and series 3 - Product standard
EN 4701-003:2013 Aerospace series - Connectors@ optical@ rectangular@ modular@ operating temperature 125 �� for EN 4531-101 contacts - Part 003: Module series 2 - Product standard
prEN 14212 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
CEN EN 4165-003-2008 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard
EN 4723:2015 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats
EN 4617:2006 Aerospace series - Recommended practices for standardising company standards
EN 3149:1996 Aerospace series - Shank nuts - Installation holes, 60° swage, flanges - Design standard
EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
EN 13205-1:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
CEN/TS 17340:2020 Stationary source emissions - Determination of mass concentration of fluorinated compounds expressed as HF - Standard reference method

Professional Standard-Safe Production, Standard series concentration

AQ 4202-2008 Administrative standard for personal exposure concentration of respirable coal dust in the air of workplace
AQ 4203-2008 Administrative standards for personal exposure concentration of respirable rock dust in the air of workplace

Professional Standard - Labor and Labor Safety, Standard series concentration

LD 39-1992 Management standards for exposure concentration of respirable coal dust in air in workplaces
LD 41-1992 Management standards for exposure concentration of respirable rock dust in the air of workplaces

CU-NC, Standard series concentration

NC 19-26-1988 Occupational Hygiene and Safety Standards System. Safety Technique. Hot Water and Steam Boilers. General Requirements for Strength Calculation
NC 38-06-02-1987 Food Sanitary Standards System. Food Enrichment General Sanitary Requirements
NC 19-01-55-1986 Occupational Hygiene and Safety Standars System. Working Area Ventilation. Determination of Chrome Trioxide, Chromatos and Dichromatos

Association of German Mechanical Engineers, Standard series concentration

VDI 2453 Blatt 1-1990 Gaseous air pollution measurement; determination of nitrogen dioxide concentration; photometric manual standard method (Saltzmann)

HU-MSZT, Standard series concentration

ITE - Institute of Transportation Engineers, Standard series concentration

PD-O01- Introduction to ITS Standards Online Series

Professional Standard - Aerospace, Standard series concentration

QJ 906-1985 固体发动机

Standard Association of Australia （SAA）, Standard series concentration

AS/NZS ISO/IEC 14143.6:2006 Information technology - Software measurement - Functional size measurement - Guide for use of ISO/IEC 14143 series and related International Standards
AS 4024.1:2006 Series(CD) Safety of machinery series on CD

CH-SNV, Standard series concentration

SN EN 17346-2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
SNV 95841-1950
VSM 10852.1-1943
SN 212 202-1978
VSM 13792-1969

PL-PKN, Standard series concentration

PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers

ES-UNE, Standard series concentration

UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
UNE-EN 14212:2013/AC:2014 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
UNE-EN 4165-003:2016 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard (Endorsed by AENOR in May of 2016.)
UNE-EN 4723:2015 Aerospace series - Standardized measurement methods for comfort and living space criteria for aircraft passenger seats (Endorsed by AENOR in October of 2015.)
UNE-EN 4617:2006 Aerospace series - Recommended practices for standardising company standards (Endorsed by AENOR in July of 2006.)

European Committee for Electrotechnical Standardization（CENELEC）, Standard series concentration

EN 50370-2:2003 Electromagnetic compatibility (EMC) - Product family standard for machine tools Part 2: Immunity

Anhui Provincial Standard of the People's Republic of China, Standard series concentration

DB34/T 2392-2015 The main scale series of standard ship types of main cargo ships passing through the lock of Heyu Line
DB34/T 2391-2015 Main scale series of standard ship types of main cargo ships passing through the locks of Huaihe River and Shaying River

CN-STDBOOK, Standard series concentration

图书 3-9861 Standard Application of Standardized Vocational Education Series Textbooks
图书 3-9533 Standardization methods for standardization of vocational education series textbooks
图书 3-9534 Standardization Practice of Standardized Vocational Education Series Textbooks

RU-GOST R, Standard series concentration

GOST R 8.943-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Telluritny glasses of system TeO2 + R2O and their fusions. Thermal conductivity in the temperatures range from 300 to 800 K and concentration of oxides o
GOST 33587-2015 Activated carbon. Standard method for determination of adsorptive capacity for adsorbates at trace concentrations
GOST 12.1.014-1984 Occupational safety standards sytem. Air in the zone of operation. Method of measuring unhealthy matters concentration using indicator tubes
GOST 11970.0-2003 Textile materials. Threads. The series of nominal values of linear density of single cotton yarn
GOST 11970.2-1976 Textile threads. A number of nominal linear densities of bast fibre single yarn
GOST 21750-1976 Chemical fiber and bunch. A number of nominal values of linear density
GOST 11970.0-1970 Textile threads. The series of nominal linear densities of single cotton yarn
GOST R 8.934-2017 State system for ensuring the uniformity of measurements. National standard. Standard reference data. Titanates of strontium and barium. Lattice parameters in the concentration range from 0 at. % to 50 % at. Ba

Professional Standard - Agriculture, Standard series concentration

GB 5009.225-2023 National Food Safety Standard Determination of Ethanol Concentration in Wine and Edible Alcohol
GB 29922-2013实施指南 National Food Safety Standard Propaganda and Implementation Series Guidelines for the Implementation of Series Standards for Formula Foods for Special Medical Purposes

Aerospace, Security and Defence Industries Association of Europe (ASD), Standard series concentration

ASD-STAN PREN 3475-601-2006 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 601: Smoke Density (Edition P 2)
ASD-STAN PREN 3226-1992 Aerospace Series Nuts, Hexagon, Plain, Normal Height, Normal Across Flats, in Steel, Cadmium Plated Classification: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius (Edition P 1)
ASD-STAN PREN 3745-601-2006 Aerospace series Fibres and cables, optical, aircraft use Test methods Part 601: Smoke density (Edition P 1)
ASD-STAN PREN 4165-003-2014 Aerospace series Connectors, electrical, rectangular, modular Operating temperature 175 °C continuous Part 003: Modules series 2 and series 3 Product standard (Edition P 3)
ASD-STAN TR 2410-1996

Professional Standard - Nuclear Industry, Standard series concentration

EJ/T 656-1999 The kits of γ-ray standard point-source for γ-ray spectrometry

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Standard series concentration

ASHRAE CI-01-9-2-2001 NBS Research and ASHRAE?s 90 Series Standards

国家市场监督管理总局、中国国家标准化管理委员会, Standard series concentration

GB 38030.1-2019 Dimensions series of standard transport ship types passing the locks of inland rivers—Part 1：Changjiang River system
GB 38030.4-2019 Dimensions series of standard transport ship types passing the locks of inland rivers—Part 4：The “three lanes” of the Pearl River system

AT-ON, Standard series concentration

ONORM EN 3149-1996 Aerospace series-Shank nuts-Installation holes,60 degree swage,flanges-Design standard

Professional Standard - Chemical Industry, Standard series concentration

HG/T 21504.1-1992 FRP storage tank standard series (VN0.5m3~VN100m3)

Military Standard of the People's Republic of China-General Armament Department, Standard series concentration

GJB 9988-2021 Prestressed anchor cable series standard atlas

Defense Logistics Agency, Standard series concentration

DLA A-A-59649 B-2005 BEARINGS, ROLLER, TAPERED, SINGLE ROW, NORMAL ANGLE (TYPE TS)

YU-JUS, Standard series concentration

JUS Z.A4.031-1979 Information and documentation. International standard serial numbering

IT-UNI, Standard series concentration

UNI 7437-1975
UNI 7435-1975 Anelli elastici di sicurezza, per alberi Serie normale Sostituisce UNI 3653

Professional Standard - Water Conservancy, Standard series concentration

SL/T 248-1999 Criterion of water filling valve series for hydraulic steel gate
SL/T 248-1999（条文说明） Criterion of water filling valve series for hydraulic steel gate(explanation)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Standard series concentration

IEEE COLOR BOOKS SET CD-2008 COMPLETE STANDARDS SERIES: VUSPEC (SE118A@ 13 Books)

Institute of Electrical and Electronics Engineers (IEEE), Standard series concentration

IEEE Std 1386-2001 IEEE Standard for a Common Mezzanine Card Family: CMC

Professional Standard - Military and Civilian Products, Standard series concentration

WJ 1259-1992 LEH series flame sensor (restricted standard)

Guizhou Provincial Standard of the People's Republic of China, Standard series concentration

DB52/T 810-2013 Guizhou Province Wujiang Cargo Ship (Team) Standard Ship Type Main Scale Series Cargo Ship and Ship Group

Consumer Electronics Association （U.S.), Standard series concentration

CEA-CEB11-2002 NTSC/ATSC Loudness Matching

ESDU - Engineering Sciences Data Unit, Standard series concentration

ESDU 78012 B-1996 Height relationships for non-standard atmospheres.