Standard Curve Series

Standard Curve Series, Total:500 items.

In the international standard classification, Standard Curve Series involves: Noise with respect to human beings, Machine tools, Aerospace electric equipment and systems, Pharmaceutics, Road engineering, Paints and varnishes, Testing of metals, Aerospace fluid systems and components, Pipeline components and pipelines, Electrical wires and cables, Products of the textile industry, Beverages, Sports equipment and facilities, Earth-moving machinery, Construction industry, Electrical accessories, Medical equipment, Waxes, bituminous materials and other petroleum products, Non-ferrous metals, IT terminal and other peripheral equipment, Fasteners for aerospace construction, Hand-held tools, Fruits. Vegetables, Iron and steel products, Products of non-ferrous metals, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Raw materials for rubber and plastics, Clothes, Cutting tools, Power transmission and distribution networks, Measurement of volume, mass, density, viscosity, Structures of buildings, Shipbuilding and marine structures in general, Photography, Nuclear energy engineering, Construction materials, Textile fibres, Shafts and couplings, Ergonomics, Equipment for the chemical industry, Aircraft and space vehicles in general, Sterilization and disinfection, Springs, Solar energy engineering, Flexible drives and transmissions, Graphical symbols, Technical drawings, Law. Administration, Fasteners, Hydraulic energy engineering, Interface and interconnection equipment, Protection against fire, Elements of buildings, Occupational safety. Industrial hygiene, Safety of machinery, Fluid storage devices, Components and accessories for telecommunications equipment, Bearings, Applications of information technology, Optics and optical measurements, Refractories, Telecommunication systems, Petroleum products in general, Road vehicles in general, Analytical chemistry, Insulating materials, Plastics, Electrical engineering in general, Company organization and management, Information technology (IT) in general, Buildings, Industrial automation systems, Open systems interconnection (OSI), On-board equipment and instruments, Metrology and measurement in general, Air quality, Water quality, Equipment for petroleum and natural gas industries, Integrated Services Digital Network (ISDN).

United States Navy, Standard Curve Series

NAVY MIL-M-18550 (1)-1957 METER, FREQUENCY, RF, LM SERIES
NAVY MIL-M-18550-1956 METER, FREQUENCY, RF, LM SERIES

Professional Standard - Machinery, Standard Curve Series

JB/T 9912.1-1999 Optical Curve Grinder Series Spectrum

European Association of Aerospace Industries, Standard Curve Series

AECMA PREN 3658-1990 Aerospace Series Tube Bend Radii Design Standard Edition 1
AECMA PREN 3373-010-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 010: Terminal lugs, ring shaped, tin plated, for crimping on copper conductors, temperature up to 150 癈 for metric and inch stud series Product standard Edition
AECMA PREN 3373-011-2006 Aerospace series Terminal lugs and in-line splices for crimping on electric conductors Part 011: Terminal lugs, ring shaped, nickel plated, for crimping on copper conductors, temperature up to 260 癈 for metric and inch stud series Product standard Editi
AECMA PREN 3373-012-2003 Aerospace Series Terminal Lugs and In-line Splices for Crimping on Electric Conductors Part 012: In-line Splices, Insulated and Sealed, for Crimping on Copper Conductors, Temperature up to 150 Degrees C Product Standard Edition P 1
AECMA PREN 3373-013-2003 Aerospace Series Terminal Lugs and in-line Splices for Crimping on Electric Conductors Part 013: In-line Splices, Insulated and Moisture Resistant, for Crimping on Copper Conductors, temperature up to 260 degrees C Product Standard Edition P 1
AECMA TR 2410-1996 Luft- Und Raumfahrt Metallische Werkstoffe Querverweis Zwischen Den Mabnormen Und Den Normen Uber Werkstoffe Aerospace Series Metallic Materials Relationship Between Dimensional Standards and Material Standards Serie aerospatiale Materiaux Metalliques Co
AECMA PREN 3795-1997 Aerospace Series Anaerobic Polymerisable Compounds Test Method Determination of Freedom from Excessive Cure Rate Edition P1
AECMA PREN 3218-003-1990 Aerospace Series Connector, Rectangular, Metallic Shells, Screw-Locking Part 003 - Plug for Front-Removable Size 22 Crimp Contacts Product Standard
AECMA PREN 3112-1987 Screws, Hexagonal Normal Head, Fully Threaded in Steel, Cadmium Plated Classification 900 MPa/235 Degrees Celsius
AECMA PREN 3112-1994 Aerospace Series Bolts, Normal Hexagonal Head, Threaded to Head, in Alloy Steel, Cadmium Plated Classification: 900 MPa (at Ambient Temperature)/235 Degrees C Edition P 2
AECMA PREN 3113-1999 Aerospace Series Screws, Hexagonal Normal Head, Fully Threaded, in Titanium Alloy Anodized Classification: 900 MPa/315 Degrees C Edition P 2; Withdrawn - Not Replaced
AECMA PREN 6019-1990 Aerospace Series Test Methods for Metallic Materials Recommended Practice for R-Curve and Kco Determination Issue P 1
AECMA PREN 4651-2008 Aerospace series Copper-clad aluminium alloy conductors for electrical cables Product standard Edition P 1
AECMA PREN 3113-1987 Aerospace Series Screws, Hexagonal Normal Head, Fully Threaded in Titanium Alloy Anodized Classification: 900 MPa/315 Degrees Celsius Issue P 1
AECMA PREN 4008-007-1996 Aerospace Series Elements of Electrical and Optical Connection General Accessories and Tooling Part 007 - Positioner for Crimping Tool M22520/2-01 Electrical Contacts According to EN 3155-016 Product Standard
AECMA PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire Issue P 1
AECMA PREN 3373-001-1996 Aerospace Series Terminal Lugs and In-Line Splices for Crimping on Electric Cables Part 001: Technical Specification Edition P 1
AECMA PREN 3373-001-2006 Aerospace Series Terminal Lugs and In-Line Splices for Crimping on Electric Conductors Part 001: Technical Specification Edition P 3
AECMA PREN 3373-001-1999 Aerospace Series Terminal Lugs and In-Line Splices for Crimping on Electric Conductors Part 001: Technical Specification Edition P 2
AECMA PREN 4300-1996 Aerospace Series Identification Marking of Engine Items Design Standard Edition P1
AECMA PREN 4300-1998 Aerospace Series Identification Marking of Engine Items Design Standard Edition P 1
AECMA PREN 2346-003-1997 Aerospace Series Cable, Electrical, Fire Resistant Part 003: Standard Version Product Standard Supersedes 3E: 08/96
AECMA PREN 3371-1994 Aerospace Series Electrical Bonding Technical Specification Edition P 1
AECMA PREN 2003-15-1993 Aerospace Series Ultrasonic Testing Reference Blocks
AECMA PREN 3676-1993 Aerospace Series Inserts, Thin Wall Design Standard Edition P 1
AECMA PREN 4385-2001 Aerospace Series Non-Metallic Materials General Organisation of Standardisation Links between Types of Standards Edition P 2
AECMA PREN 4385-1998 Aerospace Series Non-Metallic Materials General Organisation of Standardisation Links between Types of Standards Edition P 1

ITE - Institute of Transportation Engineers, Standard Curve Series

PD-O01- Introduction to ITS Standards Online Series

Association Francaise de Normalisation, Standard Curve Series

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours
NF L43-112*NF EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard.
NF EN 3658:2008 Série aérospatiale - Rayon de cintrage des tubes, pour applications moteurs - Norme de conception
NF EN 4617:2006 Série aérospatiale - Normaliser les standards d'entreprise
NF E66-217:1977 SLOT DRILL WITH PARALLEL SHANKS. SHORT SERIES AND STANDARD SERIES.
NF E66-218:1977 SLOT DRILLS WITH MORSE TAPER SHANK. SHORT SERIES AND STANDARD SERIES.
NF EN 4056-002:2014 Série aérospatiale - Frettes de câblage pour harnais - Partie 002 : liste des normes de produit
NF E66-210:1977 SLOT DRILLS WITH 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.
NF E25-600:1984 Fasteners. Wood screws family standard.
NF L52-253-002*NF EN 4056-002:2014 Aerospace series - Cable ties for harnesses - Part 002 : index of product standards
NF E66-211:1977 END MILLS WITH PARALLEL SHANKS. STANDARD SERIES AND LONG SERIES.
NF E22-051:1970 Cylindrical shaft ends.long series (normal).
NF E66-212:1977 END MILLS WITH MORSE TAPER SHANK. STANDARD SERIES AND LONG SERIES.
NF EN 2267-010:2018 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 010 : famille DR, fil simple marquable au laser UV - Norme de produit
NF E25-515:2009 Single coil spring washers - Standard series - Symbol W.
NF E25-526*NF EN ISO 7089:2000 Plain washers - Normal series - Product grade A.
NF E25-528*NF EN ISO 7091:2000 Plain washers - Normal series - Product grade C
NF E25-100:1985 FASTENERS. SCREWS FAMILY STANDARD.
NF C93-587-2:2006 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 2 : patch cords and work area cords.
NF EN 2267-009:2017 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre -55 oC et 260 oC - Partie 009 : famille DRA, fil simple et éléments assemblés - Norme de produit
NF EN 2346-003:2006 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 003 : famille DL, fil simple - Norme de produit
NF E66-209:1977 END MILLS 7/24 TAPER SHANKS. STANDARD SERIES AND LONG SERIES.
NF L00-014*NF EN 4617:2006 Aerospace series - Recommanded parctices for standardising compagny standards
NF L53-201-076:2012 Aerospace series - Electrical contacts used in elements of connection - Part 076 : contacts, electrical, male, type A, crimp, class R - Product standard.
NF L21-321*NF EN 2550:1993 Aerospace series. Rivets, solid, 100 degrees normal countersunk head, in aluminium 1050A, inch based series.
NF E25-515:1986 Single coil spring washers. Standard serie. Symbol W.
NF EN 2267-012:2015 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 oC et 260 oC - Partie 012 : famille DZ, fil simple marquable au laser UV pour emploi en basse pression - Norme de produit
NF EN 2267-007:2006 Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55oC et 260oC - - Partie 007 : famille DMA, fil simple marquable au jet d'encre et éléments assemblés - Norme de produit
NF EN 4681-005:2019 Série aérospatiale - Câbles, électriques, d'usage général, avec conducteurs en aluminium ou en aluminium chemisé cuivre - Partie 005 : famille AZ, fil simple, pour emploi en basse pression - Norme de produit
NF L36-221*NF EN 2569:1991 Aerospace series. Control cable fittings and turnbarrels. Technical specification.
NF EN 4300:2008 Série aérospatiale - Marquage des articles moteurs - Norme de conception
NF EN 3368:2008 Série aérospatiale - Trous pour pieds de centrage - Normes de conception
NF C61-3XXF1:1999 NF C 61-3 Standard Series Instructions No. 99-108
NF EN 2346-005:2017 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 005 : famille DW, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produit
NF EN 2346-004:2006 Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 oC et 260 oC - Partie 004 : famille DN, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produit
NF L53-202-002*NF EN 3373-002:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002 : general and list of product standard
NF C93-587-1:2006 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 1 : installed cabling.
NF EN 4650:2023 Série aérospatiale - Procédé de marquage des fils et câbles par laser UV
NF L32-612*NF EN 3612:1996 Aerospace series. Undercuts for splines. Design standard.
NF EN 4681-006:2019 Série aérospatiale - Câbles, électriques, d'usage général, avec conducteurs en aluminium ou en aluminium chemisé cuivre - Partie 006 : famille AZA, fil simple et éléments assemblés, pour emploi en basse pression - Norme de produit
NF X01-002:1967 Basic standards. Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers.
NF EN 4385:2022 Série aérospatiale - Matériaux non métalliques - Organisation générale de la normalisation - Liens entre les types de normes
NF L61-027*NF EN 4727:2017 Aerospace series - Standardized passenger seat weight information
NF EN 3612:1996 Série aérospatiale - Gorges de dégagement pour cannelures - Norme de conception.

British Standards Institution (BSI), Standard Curve Series

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
BS EN 3373-014:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard
BS EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard
BS EN 3711:2008 Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset
BS EN 4056-002:2014 Aerospace series. Cable ties for harnesses. Index of product standards
BS EN 3373-008:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C. Product standard
BS EN 3373-007:2012 Aerospace series. Terminal lugs and in-line splices for crimping on electric conductors. Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs. Product standard
BS EN IEC 61853-4:2018 Photovoltaic (PV) module performance testing and energy rating - Standard reference climatic profiles
BS PD 308:1996 Guide to the European Standards for engineering drawing in the BS EN series
PD 308-1996 Guide to the European standards for engineering drawing in the BS EN series
BS EN 4617:2006 Recommended practices for standardizing company standards
BS EN ISO 7089:2000 Plain washers. Normal series. Product grade A
BS EN ISO 7091:2000 Plain washers. Normal series. Product grade C
BS PD ISO/TR 23107:2021 Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series
PD ISO/TR 23107:2021 Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series
BS EN 61935-1:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 1: Installed cabling
BS EN 61935-1:2006 Testing of balanced communication cabling in accordance with standards series EN 50173: Installed cabling
BIP 0125-2011 Introduction to the ISO/IEC 20000 Series. IT Service management
19/30389262 DC BS EN 7110. Aerospace series. Bolt, 12 point flange head, metric series. Product standard
BS EN 61158-1:2014 Industrial communication networks. Fieldbus specifications. Overview and guidance for the IEC 61158 and IEC 61784 series
BS EN 3375-009:2009 Aerospace series - Cable, electrical, for digital data transmission - Single braid - CAN Bus - 120 Ohms - Type WX - Product standard
BS EN 3375-009:2016 Aerospace series. Cable, electrical, for digital data transmission. Single braid. CAN Bus. 120 ohms. Type WX. Product standard
BS EN 4650:2023 Aerospace series. Wire and cable marking process, UV Laser
18/30375254 DC BS EN 7100. Aerospace series. Bolt, hexagonal head, metric and inch series. Product standard
BS EN 4385:2022 Aerospace series. Non-metallic materials. General organization of standardization. Links between types of standards
BS EN ISO 7090:2000 Plain washers, chamfered. Normal series. Product grade A
BS EN 4880:2023 Aerospace series. General technical specification for standard parts

RU-GOST R, Standard Curve Series

GOST 9735-1987 Profile grinders. Standards of accuracy
GOST 11970.0-2003 Textile materials. Threads. The series of nominal values of linear density of single cotton yarn
GOST 11970.2-1976 Textile threads. A number of nominal linear densities of bast fibre single yarn
GOST 11970.0-1970 Textile threads. The series of nominal linear densities of single cotton yarn
GOST 11970.1-1970 Textile threads. A number of nominal linear densities of single wool and half-wool yarn
GOST 21750-1976 Chemical fiber and bunch. A number of nominal values of linear density

International Organization for Standardization (ISO), Standard Curve Series

ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2003 Acoustics - Normal equal-loudness-level contours
ISO/TR 10652:1991 Standard sizing systems for clothes
ISO/TR 11064-10:2020 Ergonomic design of control centres — Part 10: Introduction to the control room design series of standards
ISO 4183:1995 Belt drives - Classical and narrow V-belts - Grooved pulleys (system based on datum width)
ISO/TR 23107:2019 Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series
ISO 7089:1983 Plain washers; Normal series; Product grade A
ISO 7091:1983 Plain washers; Normal series; Product grade C
ISO 7089:2000 Plain washers - Normal series - Product grade A
ISO 7091:2000 Plain washers - Normal series - Product grade C
ISO 7090:1983 Plain washers, chamfered; Normal series; Product grade A
ISO/DIS 7661:2023 Aerospace Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing (Metric series)
ISO 7090:2000 Plain washers, chamfered - Normal series - Product grade A
ISO/TR 23107:2021 Criteria for assessment of new extinguishants for inclusion in the ISO 14520 series

未注明发布机构, Standard Curve Series

DIN ISO 226 E:2001-11 Acoustics - Normal equal-loudness-level contours
ASTM E1541-98(2003) Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM D3627-96(2000) Standard Test Method for Color of Cresylic Acids ("C" Series Standards)
DIN EN 4056-002 E:2013-10 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards
DIN EN ISO 7090:2000 Flat discs with chamfer – Normal series – Product class A
DB1303/T 08-1999 Sweet potato virus-free seedling breeding technology series standards
DIN EN IEC 61158-1:2020 Industrial communication networks – Fieldbuses – Part 1: Overview and guidelines for the standards of the IEC 61158 and IEC 61784 series

Professional Standard - Tobacco, Standard Curve Series

YC/T 169.3-2002 Testing physical and chemical characteristics of tow for cigarette----Part 3: Crimp number
YC/T 169.4-2002 Testing physical and chemical characteristics of tow for cigarette----Part 4: Crimp index and percentage crimp recovery
YC/T 169.1-2002 Testing physical and chemical characteristics of tow for cigarette----Part 1: Total line density
YC/T 169.2-2002 Testing physical and chemical characteristics of tow for cigarette----Part 2: Linear density of filament

Group Standards of the People's Republic of China, Standard Curve Series

T/GDPA 6-2021 Quality standard of Trelagliptin succinate
T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations
T/GZRHJX 005-2019 Technical specification for thereference materials preparation of Daqu Jiang-xiang Baijiu series in Renhuai production region
T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers
T/HEBQIA 051-2021 A series of standardized assembled high weather resistance tanks
T/HGJ 12401-2021 Design standard for electronic marshalling of control system

Korean Agency for Technology and Standards (KATS), Standard Curve Series

KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS B ISO 4183:2010 Grooved pulleys for narrow V belts
KS B ISO 4183:2013 Grooved pulleys for narrow V belts
KS B ISO 7091-2005(2020) Plain washers－Normal series－Product grade C
KS B ISO 7089-2005(2020) Plain washers－Normal series－Product grade A
KS B ISO 7089:2005 Plain washers－Normal series－Product grade A
KS B ISO 7091:2005 Plain washers－Normal series－Product grade C
KS W ISO 7661-2009(2014) Aerospace－Fluid systems－Clamp blocks for tube lines having axial alignment－Design standard and qualification testing－Metric series
KS B ISO 7090-2005(2020) Plain washers, chamfered－Normal series－Product grade A
KS B ISO 7090:2005 Plain washers, chamfered－Normal series－Product grade A

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard Curve Series

GB/T 4963-2007 Acoustics.Normal equal-loudness-level contours
GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration

American Society for Testing and Materials (ASTM), Standard Curve Series

ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM E561-21 Standard Test Method for KR Curve Determination
ASTM E561-20 Standard Test Method for KR Curve Determination
ASTM E561-19 Standard Test Method for KR Curve Determination
ASTM E561-19e1 Standard Test Method for KR Curve Determination
ASTM E561-22 Standard Test Method for KR Curve Determination
ASTM E561-08e1 Standard Test Method forK-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM B230/B230M-07(2012) Standard Specification for Aluminum 1350ndash;H19 Wire for Electrical Purposes
ASTM B230/B230M-07 Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM E561-15 Standard Test Method for KR Curve Determination
ASTM E561-08 Standard Test Method forK-R Curve Determination
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method forK-R Curve Determination
ASTM E561-15a Standard Test Method for KR Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM E1541-98 Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method forK-R Curve Determination
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM B236M-07 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM E561-23 Standard Test Method for KR Curve Determination
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM B609/B609M-99 Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM B800-05 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
ASTM B800-05(2011) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical PurposesAnnealed and Intermediate Tempers
ASTM D3883-99 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D3883-04(2008) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM C1656-07 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D3883-04(2012) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D3627-96 Standard Test Method for Color of Cresylic Acids ("C" Series Standards)
ASTM B800-00 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
ASTM B800-05(2021) Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes—Annealed and Intermediate Tempers
ASTM B801-07(2012) Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM E1891-21 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E2736-17 Standard Guide for Digital Detector Array Radiography
ASTM B389-81(1998) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM B389-81(2020) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM C1656-13 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D4840-99(2004) Standard Guide for Sampling Chain-of-Custody Procedures
ASTM D4840-99 Standard Guide for Sampling Chain-of-Custody Procedures
ASTM F2591-06(2022) Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
ASTM B801-99 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM E1891-10a Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM C861-93(2000) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
ASTM C861-93(2020) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
ASTM E2736-17(2022) Standard Guide for Digital Detector Array Radiography
ASTM E1891-97 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1891-10 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM E1891-97(2002) Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM B801-18(2023) Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM D4840-99(2010) Standard Guide for Sampling Chain-of-Custody Procedures
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E1082-90(2002) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E305-07 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C16-03(2008) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C1656-13(2018) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM C1699-09(2023) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM E305-13 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM C1699-08 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM C1656-13(2023) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM B801-07 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM D3412-01 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D3412-95 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D3412/D3412M-13(2020) Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D2241-04b Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D2241-04 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D2241-04a Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D2241-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D4882-97 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM F2771-10 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D2241-05 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D2241-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D2241-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM E305-21 Standard Practice for Establishing and Controlling Spark Atomic Emission Spectrochemical Analytical Curves
ASTM E2955-13 Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces
ASTM D6177-19 Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets

AASHTO - American Association of State Highway and Transportation Officials, Standard Curve Series

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)
T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)
R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
PP 62-2010 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA) (Revision 1)

SE-SIS, Standard Curve Series

SIS SMS 2027-1975 Dust separating. Standard curves for dust
Nr 39-1992 Curve electronics according to Swedish standards

German Institute for Standardization, Standard Curve Series

DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04
DIN EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard; German and English version EN 3658:2008
DIN EN 3658:2008-12 Aerospace series - Tube bend radii, for engine application - Design standard; German and English version EN 3658:2008
DIN VDE 0472 Bb.1:2005 Testing of cables, wires and flexible cords - List of the standards series DIN VDE 0472 (VDE 0472)
DIN EN 3711:2008 Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset; German and English version EN 3711:2008
DIN 48051-1:1959-09 Power current overhead lines; bent insulator spindles, standard design
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN EN 4056-002:2014-10 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards; German and English version EN 4056-002:2014
DIN EN 3044:1998-07 Aerospance series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard; German version EN 3044:1998
DIN EN 4617:2008-02 Aerospace series - Recommended practices for standardising company standards; German and English version EN 4617:2006
DIN EN ISO 7089:2000 Plain washers - Normal series, Product grade A (ISO 7089:2000); German version EN ISO 7089:2000
DIN EN ISO 7091:2000 Plain washers - Normal series, Product grade C (ISO 7091:2000); German version EN ISO 7091:2000
DIN EN 3044:1998 Aerospance series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard; German version EN 3044:1998
DIN EN 3612:1996 Aerospace series - Undercuts for splines - Design standard; German version EN 3612:1996
DIN EN 4617:2008 Aerospace series - Recommended practices for standardising company standards; German and English version EN 4617:2006
DIN EN 3155-015:2007 Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard; German and English version EN 3155-015:2006
DIN VDE 0207 Bb.1:2005 Insulating and sheathing compounds for cables and flexible cords - List of the standards of the series DIN VDE 0207 (VDE 0207)
DIN EN 4385:2022 Aerospace series - Non-metallic materials - General organization of standardization - Links between types of standards; German and English version EN 4385:2022
DIN EN 3612:1996-10 Aerospace series - Undercuts for splines - Design standard; German version EN 3612:1996
DIN EN 4650:2023-06 Aerospace series - Wire and cable marking process, UV Laser; German and English version EN 4650:2023
DIN EN 4385:2022-07 Aerospace series - Non-metallic materials - General organization of standardization - Links between types of standards; German and English version EN 4385:2022
DIN EN 4641-401:2022-12 Aerospace series - Cables, optical 125 ?m diameter cladding - Part 401: Tight structure bend insensitive 50 µm/125 µm GI fibre nominal, 1,8 mm outside diameter Product standard; German and English version prEN 4641-401:2022 / Note: Date of issue 2...
DIN EN 4727:2017 Aerospace series - Standardized passenger seat weight information; German and English version EN 4727:2017, only on CD-ROM
DIN EN 4880:2022-12 Aerospace series - General technical specification for standard parts; German version ASD-STAN prEN 4880:2022 / Note: Date of issue 2022-11-18

European Committee for Standardization (CEN), Standard Curve Series

EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard
EN 3711:2008 Aerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset
EN 3373-008:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 008: Copper lugs nickel plated ring shaped for copper conductors nickel plated for inch series studs up to 340 °C - Product standard
EN 4651:2014 Aerospace series - Copper-clad aluminium alloy conductors for electrical cables - Product standard
EN 3373-007:2012 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 007: Nickel plated aluminium terminal lugs for crimping on nickel plated aluminium cable for inch series studs - Product standard
EN 4056-002:2014 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards
EN 3155-026:2010 Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product standard
EN 4617:2006 Aerospace series - Recommended practices for standardising company standards
EN 3155-071:2014 Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts@ electrical@ female@ type A@ crimp@ class S - Product standard
EN 3044:1998 Aerospace series - Installation holes for inserts, screw thread, helical coil, self-locking - Design standard
EN 3612:1996 Aerospace series - Undercuts for splines - Design standard
EN ISO 10673:1998 Plain Washers for Screw and Washer Assemblies - Small, Normal and Large Series - Product Grade A Corrected 98-09-10; ISO 10673:1998
EN ISO 7089:2000 Plain Washers - Normal Series - Product Grade A ISO 7089:2000
EN ISO 7091:2000 Plain Washers - Normal Series - Product Grade C ISO 7091:2000
EN 4620:2010 Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys - Design standard

ES-UNE, Standard Curve Series

UNE-EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard (Endorsed by AENOR in May of 2008.)
UNE-EN 4056-002:2014 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards (Endorsed by AENOR in September of 2014.)
UNE-EN 4617:2006 Aerospace series - Recommended practices for standardising company standards (Endorsed by AENOR in July of 2006.)
UNE-EN 3373-002:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 002: General and list of product standard (Endorsed by AENOR in April of 2009.)
UNE-EN 3567-001:2001 Aerospace series. In line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B. Part 001: Technical specification (Endorsed by AENOR in April of 2002.)
UNE-EN 4650:2023 Aerospace series - Wire and cable marking process, UV Laser (Endorsed by Asociación Española de Normalización in April of 2023.)

The American Road & Transportation Builders Association, Standard Curve Series

AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures

Society of Automotive Engineers (SAE), Standard Curve Series

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991
SAE MA1567B-2018 Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For
SAE MA1567B-1996 Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For
SAE J2271-2009 Ship Systems and Equipment Part Standard for Studs Continuous and Double End (Inch Series)
SAE AS39029/106B-2011 Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-DTL-38999 Series I, III, IV, MIL-DTL-55302 and AS29600 Series A Connectors)

RO-ASRO, Standard Curve Series

STAS 6901-1978 Psycho-physiological acou stics STANDARD CURVES OF EQUAL LOUDNESS LEVEL AND RELATIONS BETWEEN SOUND PRESSURE LEVELS
STAS 10792-1989 INTERNATIO NAL STANDARD SERIAL NUMBKRING (ISSN)
STAS 6696-1974 Printing inks RANGE OF STANDARD INKS FOR LETTER-PRESS PRINTING

American National Standards Institute （ANSI), Standard Curve Series

ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI/IEEE 824:2004 Standard for Series Capacitors in Power Systems
ANSI/SJI JG-2010 Standard Specification for Joist Girders, JG-Series
BS ISO 13050:2022 Synchronous belt drives. Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys (British Standard)
ANSI/VITA 41.2-2006 VXS 4X Serial Rapid IO Layer Protocol Standard
ANSI/SJI CJ-2010 Standard Specifications for Composite Steel Joists, CJ-Series
ANSI/SJI K-2010 Standard Specifications for Open Web Steel Joists, K-Series
ANSI/ATIS 0300091-2012 Serialization Standard for Telecommunications Network Infrastructure Equipment
ANSI/SJI CJCOSP-1.0-2006 Standard Specifications and Code of Standard Practice for Composite Steel Joists, CJ-Series
ANSI/TIA-862-A-2011 Building Automation Systems Cabling Standard
ANSI/SJI LH/DLH-2010 Standard Specifications for Longspan Steel Joists, LH-Series, and Deep Longspan Steel Joists, DLH-Series
ONORM EN 4341:2002 Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding - Wire and rod (Austrian Standard)

IT-UNI, Standard Curve Series

UNI S 195-1943 Insulation material standards. Numerical charts and graphs
UNI 7435-1975 Anelli elastici di sicurezza, per alberi Serie normale Sostituisce UNI 3653
UNI 7437-1975 Safety elastic washer for the hole. Standard series

VE-FONDONORMA, Standard Curve Series

COVENIN 636-1974 Provisions on twist coefficient of spinning yarn in Venezuelan national standards

Professional Standard - Electron, Standard Curve Series

SJ/T 9535-1993 Grading standard of quality for twisted nematic liquid crystal display divices

Defense Logistics Agency, Standard Curve Series

DLA MS27661 REV E VALID NOTICE 1-2007 Connectors, Plug, Electrical, Crimp Type, Lanyard Release, Fail- Safe, Series I
DLA MS27661 REV E-2002 CONNECTORS, PLUG, ELECTRICAL, CRIMP TYPE, LANYARD RELEASE, FAIL-SAFE, SERIES I
DLA MS3471 REV E-2007 CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES II, CRIMP TYPE, CABLE CONNECTING, BAYONET COUPLING, CLASSES A, L and W

PK-PSQCA, Standard Curve Series

PS 122-1985 PAKISTAN STANDARD METHOD FOR THE DETERMINATION OF CRIMP OF YARN IN FABRIC
PS 63-1959 PAKISTAN STANDARD SPECIFICATION FOR COTTON SARIES (TENTATIVE)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Standard Curve Series

PREN 3658-1992 Aerospace Series Tube Bend Radii@ for Engine Application Design Standard (Issue P 1)
PREN 4056-002-2012 Aerospace series Cable ties for harnesses Part 002: Index of product standards (Edition P 2)
PREN 4056-002-2000 Aerospace Series Cable Ties for Harnesses Part 002: Index of Product Standards (Edition 4)
PREN 4056-002-2002 Aerospace Series Cable Ties for Harnesses Part 002: Index of Product Standards (Edition P 1)
PREN 6019-1990 Aerospace Series Test Methods for Metallic Materials Recommended Practice for R-Curve and Kco Determination (Issue P 1)
PREN 4617-2004 Aerospace series Recommended practices for standardising company standards (Edition P 1)
TR 2410-1996 Luft- Und Raumfahrt Metallische Werkstoffe Querverweis Zwischen Den Mabnormen Und Den Normen Uber Werkstoffe (Edition 2)
PREN 4056-006-2012 Aerospace series Cable ties for harnesses Part 006: Peek cable ties For operating temperatures - 55 °C to 240 °C Product standard (Edition P 1)
PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)
PREN 4056-003-2018 Aerospace series Cable ties for harnesses Part 003: Plastic cable ties Operating temperatures – 65 °C to 105 °C and – 65 °C to 150 °C Product standard (Edition P 2)
PREN 3658-1990 Aerospace Series Tube Bend Radii Design Standard (Edition 1)

Institute of Electrical and Electronics Engineers (IEEE), Standard Curve Series

IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions
IEEE Std 1386-2001 IEEE Standard for a Common Mezzanine Card Family: CMC
Introduction to the IEEE P2520(TM) Series of Stand Introduction to the IEEE P2520(TM) Series of Standards on Olfaction Devices and Systems
Introduction to the IEEE P2520(TM) Series of Standards on Olfaction Devices and Systems Introduction to the IEEE P2520(TM) Series of Standards on Olfaction Devices and Systems
ANSI/IEEE Std 796-1983 IEEE Standard Microcomputer System Bus
IEEE Std 603-2009 IEEE Standard Criteria for Safety Systems for Nuclear Power Generating Stations - Redline

VN-TCVN, Standard Curve Series

TCVN 5782-2009 Standard sizing systems for clothes

International Telecommunication Union (ITU), Standard Curve Series

ITU-T VOLUME 1X Protection Against Interference - Series K Recommendations Construction, Installation and Protection of Cable and Other Elements of Outside Plant - Series L Recommendations
ITU-T V.92-2000 Enhancement to Recommendation V.90 Series V: Data Communication over the Telephone Network Simultaneous Transmission of Data and Other Signals Study Group 16

SAE - SAE International, Standard Curve Series

SAE MA1567C-2019 Insert@ Screw Thread@ Helical Coil Metric Series@ Standard Assembly Dimensions for

Aerospace, Security and Defence Industries Association of Europe (ASD), Standard Curve Series

ASD-STAN PREN 4056-002-2012 Aerospace series Cable ties for harnesses Part 002: Index of product standards (Edition P 2)
ASD-STAN TR 2410-1996 Aerospace series. metallic material. Relationship between dimensional standards and material standards
ASD-STAN PREN 4617-2004 Aerospace series Recommended practices for standardising company standards (Edition P 1)
ASD-STAN PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire (Issue P 1)
ASD-STAN PREN 4487-1999 Aerospace Series Carbon Filament Yarn 5500 MPa Nominal Strength 300 GPa Nominal Modulus

VDE - VDE Verlag GmbH@ Berlin@ Germany, Standard Curve Series

VDE 0207 BEIBLATT 1-2005 Isolier- und Mantelmischungen fuer Kabel und isolierte Leitungen - Verzeichnis der Normen der Reihe DIN VDE 0207 (VDE 0207)

Professional Standard - Aerospace, Standard Curve Series

QJ 906-1985 固体发动机

HU-MSZT, Standard Curve Series

MI 1702-1969 standard number and a series of
MNOSZ 16168-1954 Standard printed matter product series 1
MSZ 11023/2-1971 Standard series of reinforced concrete components

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Standard Curve Series

SERIES Y SUPP 49-2018 ITU-T Y.3500-series – Cloud computing standardization roadmap (Study Group 15)

Anhui Provincial Standard of the People's Republic of China, Standard Curve Series

DB34/T 2392-2015 The main scale series of standard ship types of main cargo ships passing through the lock of Heyu Line

CN-STDBOOK, Standard Curve Series

图书 3-9861 Standard Application of Standardized Vocational Education Series Textbooks
图书 3-9533 Standardization methods for standardization of vocational education series textbooks
图书 3-9534 Standardization Practice of Standardized Vocational Education Series Textbooks
图书 3-9718 Formulation and implementation of group standards for Mongolian word mark certification series
图书 3-9893 Interpretation of GB/T 39551 "Patent Navigation Guide" Series Standards

CENELEC - European Committee for Electrotechnical Standardization, Standard Curve Series

PREN 50471-2005 Electromagnetic compatibility (EMC) - Product family emission standard for wire-line telecommunication networks
EN 61935-1:2005 Testing of balanced communication cabling in accordance with standards series EN 50173 Part 1: Installed cabling

(U.S.) Ford Automotive Standards, Standard Curve Series

FORD ESB-M2E13-C-2003 PAPERBOARD, KRAFT LINED - BENDING GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on ESB-M2E13-A)
FORD ESB-M2E13-D-2003 PAPERBOARD, KRAFT LINED - BENDING GRADE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on ESB-M2E13-A)
FORD WSD-M15H51-E-1992 THREAD, POLYAMIDE, THREE PLY, UNDERTHREAD Shown on WSD-M15H51-D
FORD WSD-M15H51-E-2009 THREAD, NYLON, THREE PLY, UNDERTHREAD, TEX 70 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2L61-A2-2003 WIRE, ALUMINUM, 1.0% SILICON ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M2L61-A1
FORD M2C15-B-2009 OIL - REFRIGERATION
FORD M2C15-C-2009 OIL - REFRIGERATION
FORD ESF-M2L61-A2-2010 WIRE, ALUMINUM, 1.0% SILICON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M11G28-A3-2004 DECORATIVE WOOD VENEER, WALNUT-JUGLANS NIGRA, CURL CUT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2L69-A2-2010 WIRE, ALUMINUM, 99.99% PURITY ***TO BE USED WITH FORD WSS-M99P1111-A***

Professional Standard - Nuclear Industry, Standard Curve Series

EJ/T 656-1999 The kits of γ-ray standard point-source for γ-ray spectrometry

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Standard Curve Series

ASHRAE CI-01-9-2-2001 NBS Research and ASHRAE?s 90 Series Standards

YU-JUS, Standard Curve Series

JUS U.J1.070-1986 Fire protection. Standard time-temperature curve in fire resistance test furnaces for constructions
JUS Z.A4.031-1979 Information and documentation. International standard serial numbering

National Association of Corrosion Engineers (NACE), Standard Curve Series

NACE RP0197-1997 Standard Format for Computerized Electrochemical Polarization Curve Data Files
NACE RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files Item No. 21080

CEN - European Committee for Standardization, Standard Curve Series

EN ISO 10673:2009 Plain washers for screw and washer assemblies - Small@ normal and large series - Product grade A
EN 3155-026:2006 Aerospace series Electrical contacts used in elements of connection Part 026: Contacts@ electrical@ male@ type A@ crimp@ class R Product standard (Incorporating Corrigendum 2006)

Danish Standards Foundation, Standard Curve Series

DS/ISO 7089:1986 Plain washers. Normal series. Product grade A
DS/EN 4617:2006 Aerospace series - Recommended practices for standardising company standards
DS/ISO 7091:1986 Plain washers. Normal series. Product grade C
Standardpakke - CE-mærkning af pyrotekniske artikl Standards Package – Pyrotechnic articles – The DS/EN 15947 series
DS/ISO 7090:1986 Plain washers, chamfered. Normal series. Product grade A
DS/EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins
DS/EN 4650:2010 Aerospace series - Wire and cable marking process, UV Laser
DS/EN 3612:1997 Aerospace series - Undercuts for splines - Design standard
Standardpakke - Personligt flydeudstyr-2021 Standards Package – Personal flotation devices – The DS/EN ISO 12042 series

Professional Standard - Chemical Industry, Standard Curve Series

HG/T 21504.1-1992 FRP storage tank standard series (VN0.5m3~VN100m3)
HG/T 21616-1997 Standard series of mufflers for common equipment in chemical plants
HG/T 21616-1997（编制说明） Standard series of mufflers for common equipment in chemical plants
HG/T 21504.2-1992 Assembled FRP Storage Tank Standard Series (VN100m3~VN500m3)
HG/T 21548-1993 Standard series of suction dredges in radial secondary settling ponds
HG/T 21504.1-1992（条文说明） VN0.5m~VN100m FRP storage tank standard series
HG/T 21548-1993（编制说明） Standard series of radial flow secondary sedimentation tank suction dredger
HG 21588-1995 Standard series and technical requirements of glass plate liquid level gauge
HG/T 21588-1995 Glass plate liquid level gauge standard series and technical requirements

Military Standard of the People's Republic of China-General Armament Department, Standard Curve Series

GJB 9988-2021 Prestressed anchor cable series standard atlas

Lithuanian Standards Office , Standard Curve Series

LST EN 4617-2006 Aerospace series - Recommended practices for standardising company standards
LST EN 2550-2002 Aerospace series - Rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series
LST EN 3368-2008 Aerospace series - Aerospace design standard - Holes for locating pins
LST EN 4650-2010 Aerospace series - Wire and cable marking process, UV Laser
LST EN 3612-2001 Aerospace series - Undercuts for splines - Design standard

Sichuan Provincial Standard of the People's Republic of China, Standard Curve Series

DB5105/T 36-2020 Technical Specifications for the Production of Geographical Indication Products Luzhou Laojiao Series Quyao (Jiuxiang Brand)

AENOR, Standard Curve Series

UNE 25192:1967 SELECTIVE LIST OF ARTICULATIONS. STANDARDIZED SERIES OF AXE DIAMETERS.
UNE-EN 3044:1998 AEROSPACE SERIES. INSTALLATION HOLES FOR INSERTS, SCREW THREAD, HELICAL COIL, SELF-LOCKING. DESIGN STANDARD.
UNE-EN 2550:1993 AEROSPACE SERIES. RIVETS, SOLID, 100o NORMAL COUNTERSUNK HEAD, IN ALUMINIUM 1050A, INCH BASED SERIES.
UNE-EN 3612:1997 AEROSPACE SERIES. UNDERCUTS FOR SPLINES. DESIGN STANDARD.
UNE-EN 3643:1997 AEROSPACE SERIES. RIVETS, SOLID, 100o COUNTERSUNK NORMAL HEAD, IN TITANIUM TI-PO2, ANODIZED, INCH BASED SERIES.
UNE-EN 2555:1993 AEROSPACE SERIES. RIVETS, SOLID, 100o NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 5056A, INCH BASED SERIES.
UNE-EN 2553:1993 AEROSPACE SERIES. RIVETS, SOLID, 100o NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2017A, INCH BASED SERIES.
UNE-EN 2551:1993 AEROSPACE SERIES. RIVETS, SOLID, 100o NORMAL COUNTERSUNK HEAD WITH DOME, IN ALUMINIUM ALLOY 2117, INCH BASED SERIES.
UNE-EN 3676:1998 AEROSPACE SERIES. INSERTS, THIN WALL, SELF-LOCKING. DESIGN STANDARD.

Aerospace Industries Association/ANSI Aerospace Standards, Standard Curve Series

AIA/NAS NASM33537-2013 INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR (Rev 2)
AIA/NAS NAS983-2013 STANDARD FORMAT FOR NAS 900 SERIES EQUIPMENT SPECIFICATIONS Rev 4

国家市场监督管理总局、中国国家标准化管理委员会, Standard Curve Series

GB 38030.4-2019 Dimensions series of standard transport ship types passing the locks of inland rivers—Part 4：The “three lanes” of the Pearl River system
GB 38030.3-2019 Dimensions series of standard transport ship types passing the locks of inland rivers—Part 3：Xijiang main river

AT-ON, Standard Curve Series

ONORM ISO 3408-2:1993 Ball screws - Nominal diameters and nominal leads - Metrie series
ONORM EN 2550-1993 Aerospace series — Rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series

ETSI - European Telecommunications Standards Institute, Standard Curve Series

ETSI EN 302 262:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Product family emission standard for wire-line telecommunication networks (V1.1.1)
TR 103 088-2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the EN 301 489 series of EMC standards (V1.1.1)
TR 103 088-2014 Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the EN 301 489 series of EMC standards (V1.2.1)
TR 103 088-2016 Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the ETSI EN 301 489 series of EMC standards (V1.3.1)
ETR 276-1996 Transmission and Multiplexing (TM); Open Network Provision (ONP) Leased Lines; Standardization Requirements for Synchronous Digital Hierarchy (SDH) Leased Lines

Professional Standard - Water Conservancy, Standard Curve Series

SL/T 248-1999 Criterion of water filling valve series for hydraulic steel gate
SL/T 248-1999（条文说明） Criterion of water filling valve series for hydraulic steel gate(explanation)
SL 40-1992 QPG winch type: Standards for high-lift hoist series

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Standard Curve Series

IEEE COLOR BOOKS SET CD-2008 COMPLETE STANDARDS SERIES: VUSPEC (SE118A@ 13 Books)

Standard Association of Australia （SAA）, Standard Curve Series

AS 4024.1:2006 Series(CD) Safety of machinery series on CD

Professional Standard - Military and Civilian Products, Standard Curve Series

WJ 1259-1992 LEH series flame sensor (restricted standard)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Standard Curve Series

JEDEC JESD11-1984 Chip Carrier Pinouts Standardized for CMOS 4000, HC and HCT Series of Logic Circuits

BR-ABNT, Standard Curve Series

ABNT PB-528-1979 railway. Fixed facility building boundaries. The tangent and curve radii are greater than 500 m. Standard gauge and broad gauge

American Society of Mechanical Engineers (ASME), Standard Curve Series

ASME STP-PT-094-2022 Determination of Stress Strain Curves of 304, 304L, 316, 316L for Strain-Based Design Criteria

Professional Standard - Agriculture, Standard Curve Series

GB 29922-2013实施指南 National Food Safety Standard Propaganda and Implementation Series Guidelines for the Implementation of Series Standards for Formula Foods for Special Medical Purposes

AIA/NAS - Aerospace Industries Association of America Inc., Standard Curve Series

NASM33537-2017 INSERT@ SCREW THREAD@ HELICAL COIL@ INCH SERIES@ COARSE AND FINE THREAD@ STANDARD ASSEMBLY DIMENSIONS FOR (Rev 3)
NASM33537-2013 INSERT@ SCREW THREAD@ HELICAL COIL@ INCH SERIES@ COARSE AND FINE THREAD@ STANDARD ASSEMBLY DIMENSIONS FOR (Rev 2)
NASM33537-2002 Insert@ Screw Thread@ Helical Coil@ Inch Series@ Coarse and Fine Thread@ Standard Assembly Dimensions for
NASM33537-2009 INSERT@ SCREW THREAD@ HELICAL COIL@ INCH SERIES@ COARSE AND FINE THREAD@ STANDARD ASSEMBLY DIMENSIONS FOR (Rev 1)

NZ-SNZ, Standard Curve Series

NZSS GP 8-1963 STANDARD SPECIFICATION (GOVERNMENT PURCHASING SERIES) FOR CARBON PAPER

NO-SN, Standard Curve Series

NS 5317-1977 End mills with Morse taper shanks - Standard series

ATIS - Alliance for Telecommunications Industry Solutions, Standard Curve Series

0300091-2007 Serialization Standard for Telecommunications Network infrastructure Equipment
0300091-2012 Serialization Standard for Telecommunications Network Infrastructure Equipment

European Telecommunications Standards Institute (ETSI), Standard Curve Series

ETSI TR 103 088-2016 Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the ETSI EN 301 489 series of EMC standards (V1.3.1)
ETSI TR 103 088-2012 Electromagnetic compatibility and Radio spectrum Matters (ERM); Using the EN 301 489 series of EMC standards V1.1.1

未注明发布机构, Standard Curve Series

DIN ISO 226 E:2001-11 Acoustics - Normal equal-loudness-level contours
ASTM E1541-98(2003) Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM D3627-96(2000) Standard Test Method for Color of Cresylic Acids ("C" Series Standards)
DIN EN 4056-002 E:2013-10 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards
DIN EN ISO 7090:2000 Flat discs with chamfer – Normal series – Product class A
DB1303/T 08-1999 Sweet potato virus-free seedling breeding technology series standards
DIN EN IEC 61158-1:2020 Industrial communication networks – Fieldbuses – Part 1: Overview and guidelines for the standards of the IEC 61158 and IEC 61784 series

CH-SNV, Standard Curve Series

SEV 3044-1964 Metric ISO thread. Standard series (coarse) M 1 ... M 68

Aeronautical Radio Inc., Standard Curve Series

ARINC 701-1 ITEM 11.0 Flight Control System Wire Separation Criteria

Underwriters Laboratories (UL), Standard Curve Series

UL 183-1993 UL Standard for Safety Manufactured Wiring Systems
UL 999F BULLETIN-2008 UL Standard for Safety Manufactured Wiring Systems
UL 183 BULLETIN-2000 UL Standard for Safety Manufactured Wiring Systems

API - American Petroleum Institute, Standard Curve Series

API STD 1163 RUSSIAN-2013 In-line Inspection Systems Qualification Standard (ВТОРОЕ ИЗДАНИЕ)
API STD 1163-2005 In-line Inspection Systems Qualification Standard (First Edition)
API STD 1163-2013 In-line Inspection Systems Qualification Standard (Second Edition)

IN-BIS, Standard Curve Series

IS 13742 Pt.2-1993 Carbide tipped single point tools. ISO series. Part 2: Cranked turning and facing tool (ISO 2). Specification

CZ-CSN, Standard Curve Series

CSN ISO 3408-2:1993 Ball screws. Part 2: Nominal diameters and nominal leads. Metric series

Professional Standard - Railway, Standard Curve Series

TB/T 1506-2003 Standards of operation of receiving and departing trains on single and double lines with telephone block and without interlocking

IX-UIC, Standard Curve Series

UIC OR 552-1997 Electrical power supply for trains Standard technical characteristics of the train bus

U.S. Air Force, Standard Curve Series

AIR FORCE MIL-S-7742 D (1)-1992 SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES: GENERAL SPECIFICATION FOR [Use In Lieu Of: AIR FORCE MIL-S-007742 C CANC NOTICE 1]
AIR FORCE MIL-S-7742 D-1991 SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES: GENERAL SPECIFICATION FOR

Alliance of Telecommunications Industry Solutions （ATIS), Standard Curve Series

ATIS 0300091-2012 Serialization Standard for Telecommunications Network Infrastructure Equipment

Jiangxi Provincial Standard of the People's Republic of China, Standard Curve Series

DB36/T 561-2018 Main scale series of standard ship type for ships passing through locks

Taiwan Provincial Standard of the People's Republic of China, Standard Curve Series

CNS 13687-1996 Guidance to the Integrated Services Digital Network (ISDN) Series Standards

PT-IPQ, Standard Curve Series

NP 2023-1986 document. International Standard Number (ISSN) of a series of publications