ZH
RU
ES

Exhaust Diluted Emissions

Exhaust Diluted Emissions, Total:385 items.

In the international standard classification, Exhaust Diluted Emissions involves: Air quality, Internal combustion engines for road vehicles, Internal combustion engines, Valves, Gas and steam turbines. Steam engines, Pipeline components and pipelines, Wastes, Environmental protection, Vocabularies, Road vehicles in general, Construction materials, Domestic, commercial and industrial heating appliances, Motor cycles and mopeds, Diagnostic, maintenance and test equipment, Electric road vehicles, Farming and forestry, Floor treatment appliances, Shipbuilding and marine structures in general, Glass, Railway engineering in general, Railway rolling stock, Metrology and measurement in general.

British Standards Institution (BSI), Exhaust Diluted Emissions

BS ISO 16183:2002 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS ISO 25597:2013 Stationary source emissions. Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
BS ISO 11042-2:1996 Gas turbines. Exhaust gas emission. Automated emission monitoring
BS ISO 16183:2003 Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS ISO 8178-1:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement systems of gaseous and particulate emissions
BS ISO 11042-2:1997 Gas turbines - Exhaust gas emission - Automated emission monitoring
BS ISO 11042-1:1996 Gas turbines. Exhaust gas emission. Measurement and evaluation
BS ISO 8178-2:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
21/30426008 DC BS ISO 8178-2. Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
BS ISO 8178-3:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 8178-3:1994 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 11042-1:1997 Gas turbines - Exhaust gas emission - Measurement and evaluation
BS ISO 8178-2:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-5:2015 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Test fuels
BS EN 16516:2017+A1:2020 Construction products: Assessment of release of dangerous substances. Determination of emissions into indoor air
BS ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
BS ISO 8178-3:2019 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
BS ISO 19449:2015 Mopeds. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS 6069-4.2:1991 Characterization of air quality - Stationary source emissions - Method for the determination of asbestos plant emissions by fibre count measurement
19/30395228 DC BS EN 16429. Stationary source emissions. Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
BS ISO 8178-9:2019 Reciprocating internal combustion engines. Exhaust emission measurement - Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
BS EN 16429:2021 Tracked Changes. Stationary source emissions. Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
19/30387314 DC BS ISO 8178-1 AMD1. Reciprocating internal combustion engines. Exhaust emission measurement. Part 1. Test-bed measurement systems of gaseous and particulate emissions
BS ISO 17479:2013+A1:2020 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS ISO 8178-5:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
19/30392693 DC BS EN 16516. Construction products. Assessment of release of dangerous substances. Determination of emissions of into indoor air
BS ISO 8178-6:2018 Reciprocating internal combustion engines. Exhaust emission measurement - Report of measuring results and test
BS 6069 Sec.4.2:1991 Characterization of air quality. Stationary source emissions. Method for the determination of asbestos plant emissions by fibre count measurement
BS EN ISO 8178-6:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and tests
BS ISO 8178-6:2001 Reciprocating internal combustion engines. Exhaust emission measurement. Report of measuring results and test
BS ISO 8178-6:2000 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and test
BS ISO 8178-8:2015 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Engine group determination
BS ISO 8178-8:1997 Reciprocating internal combustion engines - Exhaust emission measurement - Engine group determination
BS ISO 8178-7:1997 Reciprocating internal combustion engines - Exhaust emission measurement - Engine family determination
BS ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - General test requirements
BS ISO 3929:2003 Road vehicles. Measurement methods for exhaust gas emissions during inspection or maintenance
BS ISO 8178-7:2015 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Engine family determination
BS ISO 6855-1:2012 Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption. General test requirements
BS EN 17416:2021 Glass in building. Assessment of release of dangerous substances. Determination of emissions into indoor air from glass products
19/30387221 DC BS ISO 8178-5. Reciprocating internal combustion engines. Exhaust emission measurement. Part 5. Test fuels
19/30392436 DC BS ISO 17479 AMD1. Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS ISO 6460-3:2007+A2:2022 Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption - Fuel consumption measurement at a constant speed
BS ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Test cycles and specific test conditions
BS ISO 6460-3:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Fuel consumption measurement at a constant speed
BS ISO 23274-2:2012 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Externally chargeable vehicle
BS ISO 6460-2:2014 Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. Test cycles and specific test conditions
BS ISO 7967-12:2022 Tracked Changes. Reciprocating internal combustion engines. Vocabulary of components and systems. Exhaust emission control systems
BS ISO 23274-2:2021 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Externally chargeable vehicles
19/30395447 DC BS EN 17416. Glass in building. Assessment of relaease of dangerous substances. Determination of emissions into indoor air from glass products
BS ISO 8178-4:2007 Reciprocating internal combustion engines - Exhaust emission measurement - Steady-state test cycles for different engine applications
BS ISO 23274-1:2013 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Non-externally chargeable vehicles
BS ISO 6460-1:2022 Tracked Changes. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. General test requirements
BS ISO 8178-9:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transi ent conditions
BS ISO 8178-9:2012 Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS ISO 23274-1:2019 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles
BS ISO 8178-4:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Steady-state and transient test cycles for different engine applications
BS ISO 6855-3:2012 Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption. Fuel consumption measurement at a constant speed
21/30434480 DC BS ISO 7967-12. Reciprocating internal combustion engines. Vocabulary of components and systems. Part 12. Exhaust emission control systems

未注明发布机构, Exhaust Diluted Emissions

BS ISO 16183:2002(2003) Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS ISO 11042-2:1996(2000) Gas turbines — Exhaust gas emission — Part 2 : Automated emission monitoring
DIN EN ISO 8178-1:1996 Reciprocating internal combustion engines, Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
BS ISO 11042-1:1996(2000) Gas turbines — Exhaust gas emission — Part 1 : Measurement and evaluation
BS ISO 25597:2013(2015) Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
DIN EN 16516:2018 Construction products – assessment of the release of hazardous substances – determination of emissions into indoor air
ISO 25597:2013/Cor 1:2015 Stationary Source Emissions. Technical Corrigendum 1 for Test Method for Determination of PM and PM Mass in Stack Waste Using Cyclone Samples and Sample Concentration Dilutions
BS ISO 8178-10:2002(2003) Reciprocating internal combustion engines — Exhaust emission measurement — Part 10 : Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
DIN EN ISO 8178-5:1999 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels

Association of German Mechanical Engineers, Exhaust Diluted Emissions

VDI 3872 Blatt 2-1995 Emission measurement - Measurement of polycyclic aromatic hydrocarbons (PAHs) - Measurement of PAHs in the diluted exhaust gas from gasoline and diesel engines of passenger cars gas chromatographic determination - Dilution tunnel method
VDI 3873 Blatt 1-1992 Emission measurement; measurement of Polycyclic Aromatic Hydrocarbons (PAH) in stationary industrial plants; dilution method (RWTÜV method); gas-chromatographic determination
VDI 3481 Blatt 2-1998 Gaseous emission measurement - Determination of gaseous organic carbon in waste gases - Adsorption on silica gel
VDI 3862 Blatt 8-2015 Measurement of gaseous emissions - Measurement of formaldehyde in the exhaust gas of combustion engines - FTIR method
VDI 2462 Blatt 2-2011 Measurement of gaseous emissions - Determination of sulphur trioxide in water vapour containing exhaust gas - Condensation method
VDI 3861 Blatt 2-2008 Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method

Lithuanian Standards Office , Exhaust Diluted Emissions

LST ISO 16183:2006 Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions (identical ISO 16183:2002)
LST EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
LST EN 17416-2021 Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products
LST ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance (idt ISO 3929:2003)
LST ISO 16185:2006 Road vehicles - Engine families for certification of heavy-duty vehicles by Exhaust emission (identical ISO 16185:2000)

Korean Agency for Technology and Standards (KATS), Exhaust Diluted Emissions

KS R ISO 16183-2009(2019) Heavy duty engines－Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
KS R ISO 16183:2009 Heavy duty engines-Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
KS B ISO 11042-2-2015(2020) Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS B ISO 11042-2:2005 Gas turbines-Exhaust gas emission-Part 2:Automated emission monitoring
KS B ISO 11042-2:2015 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS R ISO 8178-1:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS R ISO 8178-2:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS B ISO 11042-1:2015 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
KS B ISO 11042-1:2005 Gas turbines-Exhaust gas emission-Part 1:Measurement and evaluation
KS B ISO 11042-1-2015(2020) Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
KS B ISO 8178-11:2008 Reciprocating internal combustion engines－Exhaust emission measurement－Part 11：Test bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
KS R 1046-2001(2011) Road vehicles?Measurement methods for exhaust gasemissions during inspection or maintenance
KS R ISO 16185-2006(2016) Road vehicles－Engine families for certification ofheavy－duty vehicles－Exhaust emissions
KS R ISO 16185-2006(2021) Road vehicles－Engine families for certification ofheavy－duty vehicles－Exhaust emissions
KS R ISO 3929-2006(2021) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 3929-2006(2016) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 8178-3-2007(2022) Reciprocating internal combustion engines－Exhaust emission measurement－Part 3：Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
KS R ISO 3929:2006 Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 8178-8:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination
KS R ISO 8178-7:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination
KS R ISO 8178-6:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test
KS R ISO 8178-9:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition eng
KS R 0122-2018 Road vehicles — Exhaust emissions and fuel consumption measurements for externally chargeable hybrid electric vehicles
KS R 1021-2005 Analytical procedure for continuous measurement of carbonmonoxide, carbon dioxide and hydrocarbon in automobile exhaust gas
KS R ISO PAS 3930:2014 Instruments for measuring vehicle exhaust emissions — Metrological and technical requirements; Metrological control and performance tests
KS R ISO 8178-4:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state test cycles for different engine applications

RU-GOST R, Exhaust Diluted Emissions

GOST R 52408-2005 Reciprocating internal combustion engines. Exhaust emission. Part 2. Measurement of exhaust emission at site
GOST R ISO 16183-2013 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
GOST R 52408-2014 Reciprocating internal combustion engines. Exhaust emission and visible pollutants. Measurement of exhaust emission at site
GOST R ISO 11042-1-2001 Gas turbines. Methods of exhaust gas emission determinations
GOST ISO 8178-11-2015 Reciprocating internal combustion engines. Exhaust emission measurement. Part 11. Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
GOST R 51249-1999 Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods
GOST R 50953-2008 Emission of the exhaust gas pollutants by the main-line and shunting diesel locomotives. Norms and determination methods
GOST R 50953-1996 Emission of the exhaust gas pollutants by the main line and shunting diesel locomotives. Norms and determination methods
GOST 31967-2012 Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods
GOST R 17.2.2.07-2000 Nature protection. Atmosphere. Engines for minitractors and minimecanical objects. Rates and testing methods of exhaust emission and smoke
GOST R 54129-2010 Emission of the exhaust gas pollutants by the main-line and shunting for the special-purpose rolling stock. Norms and determination methods
GOST R ISO 23274-2013 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Non-externally chargeable vehicles
GOST 8.615-2013 State system for ensuring the traceability of measurements. Instruments for measuring vehicle exhaust emissions. Verification procedure
GOST ISO 8178-9-2014 Reciprocating internal combustion engines. Exhaust emission measurement. Part 9. Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
GOST ISO 8178-10-2014 Reciprocating internal combustion engines. Exhaust emission measurement. Part 10. Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
GOST 32210-2013 Emission of the exhaust gas pollutants by the main-line and shunting of the special-purpose railway rolling stock. Norms and determination methods

United States Navy, Exhaust Diluted Emissions

NAVY MIL-R-25410 G NOTICE 1-1997 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
NAVY MIL-R-25410 G-1991 REGULATORS, OXYGEN, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
NAVY MIL-R-29585 NOTICE 1-1997 REGULATOR, OXYGEN, CHEST MOUNTED, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING
NAVY MIL-R-29585-1991 REGULATOR, OXYGEN, CHEST MOUNTED, DILUTER-DEMAND, AUTOMATIC-PRESSURE BREATHING

International Organization for Standardization (ISO), Exhaust Diluted Emissions

ISO 16183:2002 Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
ISO 11042-2:1996 Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 3930:2000 Instruments for measuring vehicle exhaust emissions
ISO 8178-2:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution
ISO 11042-1:1996 Gas turbines - Exhaust gas emission - Part 1: Measurement and evaluation
ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
ISO 8178-1:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 8178-3:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type
ISO 8178-9:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines usin
ISO 19449:2015 Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
ISO 8178-5:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
ISO 13199:2012 Stationary source emissions - Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes - Non-dispersive infrared analyser equipped with catalytic converter
ISO 3929:2003 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
ISO 3929:1995 Road vehicles - Measurement methods for exhaust gas emmissions during inspection or maintenance
ISO 7967-12:2022 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 12: Exhaust emission control systems
ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
ISO 23274:2007 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles
ISO 6855-1:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
ISO 6460-1:2007/Amd 1:2015 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements; Amendment 1
ISO 23274-2:2012 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 2: Externally chargeable vehicles
ISO 23274-2:2021 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 2: Externally chargeable vehicles

Association Francaise de Normalisation, Exhaust Diluted Emissions

NF E37-504-2*NF ISO 11042-2:2016 Gaz turbines - Exhaust gas emission - Part 2 : automated emission monitoring
NF R10-019*NF ISO 3930:2001 Instruments for measuring vehicle exhaust emissions
NF J95-067*NF EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measutrement - Test-bed measurement of gaseous and particulate exhaust emissions
NF E37-504-2:1999 Gas turbines - Exhaust gas emission - Part 2 : automated emission monitoring.
NF E37-211-2*NF ISO 8178-2:2022 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions
NF X43-052*NF ISO 25597:2014 Stationary source emissions - Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF ISO 8178-2:2022 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 2 : mesurage des émissions de gaz et de particules sur site
NF E37-504-1:1999 Gas turbines - Exhaust gas emission - Part 1 : measurement and evaluation.
NF E37-504-1*NF ISO 11042-1:2016 Gaz turbines - Exhaust gas emission - Part 1 : measurement and evaluation
NF E37-211-2:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.
NF ISO 8178-1:2020 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 1 : mesurage des émissions de gaz et de particules au banc d'essai
NF ISO 8178-9:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 9 : cycles et procédures d'essai pour le mesurage au banc d'essai des émissions de fumées de gaz d'échappement des moteurs alternatifs à combust...
NF X43-134*NF EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
NF E37-211-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5 : test fuels.
NF E37-211-1*NF ISO 8178-1:2020 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement systems of gaseous and particulate emissions
NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
NF P01-025*NF EN 16516+A1:2020 Construction products : assessment of release of dangerous substances - Determination of emissions of into indoor air
NF P01-025/IN1*NF EN 16516/IN1:2020 Construction products : assessment of release of dangerous substances - Determination of emissions of into indoor air
NF E37-211-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions.
NF D35-338:1986 GAS-FIRED BOILERS OF OUTPUT LESS THAN OR EQUAL TO 70 KW. GAS FIRED CONDENSING BOILERS EQUIPPED WITH A FAN BUT WITHOUT A DRAUGHT BREAK OR OPENING FOR DILUTION OF THE COMBUSTION PRODUCTS.
NF E37-211-9*NF ISO 8178-9:2019 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 : test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
NF E37-211-5:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 5 : test fuels.
NF E37-211-5*NF ISO 8178-5:2021 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5 : test fuels
NF X43-317:2011 Émissions de sources fixes - Détermination de l'indice de pollution acide ou alcaline des effluents gazeux
NF ISO 8178-5:2021 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 5 : carburants d'essai
NF R10-018*NF ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
NF R10-018:1996 Road vehicles. Measurement procedures for exhaust gas emissions during inspection or maintenance.
NF X43-337*NF EN ISO 13199:2012 Stationary source emissions - Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes - Non-dispersive infrared method equipped with catalytic converter
NF ISO 8178-3:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 3 : définitions et méthodes de mesure de la fumée des gaz d'échappement dans des conditions stabilisées
NF E37-211-8*NF ISO 8178-8:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 8 : engine group determination
NF P78-002*NF EN 17416:2021 Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products
NF E37-211-7*NF ISO 8178-7:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 7 : engine family determination
NF ISO 8178-6:2018 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 6 : rapport de mesure et d'essai
NF ISO 8178-8:2015 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 8 : détermination des groupes de moteurs
NF D35-372*NF EN 1266:2003 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases.
NF D35-372/A1*NF EN 1266/A1:2005 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
NF E37-211-6:2010 Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test.
NF E37-002-12*NF ISO 7967-12:2015 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 12 : exhaust emission control systems
NF E37-211-6*NF ISO 8178-6:2018 Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test
NF ISO 8178-7:2015 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 7 : détermination des familles de moteurs
NF ISO 7967-12:2022 Moteurs alternatifs à combustion interne - Vocabulaire des composants et des systèmes - Partie 12 : systèmes de contrôle des émissions de gaz d'échappement
NF R10-019:1996 Road vehicles. Measurement equipment for exhaust gas emissions during inspection or maintenance. Technical specifications.
NF X43-404-9*NF EN ISO 16000-9:2006 Indoor air - Part 9 : determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method
FD P01-026*FD CEN/TR 17304:2019 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air of ammonia from cellulose insulation at 90 % RH
NF R10-025-3:2016 Véhicules routiers - Mesurage de l'opacité des gaz d'échappement émis par les moteurs à allumage par compression (diesel) - Partie 3 : procédure de contrôle des polluants visibles (opacité) des gaz d'échappement
NF E37-211-4:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4 : steady-state test cycles for different engine applications.
NF E37-211-4:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 4 : test cycles for different engine applications.
NF EN ISO 23210:2009 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des faibles concentrations au moyen d'impacteurs
NF T54-902*NF EN ISO 13255:2017 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
NF E37-211-9:2012 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9: test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
NF E37-211-10:2003 Reciprocating internal combustion engines - Exhaust emission measurement - Part 10 : test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions.

Japanese Industrial Standards Committee (JISC), Exhaust Diluted Emissions

JIS B 8043-2:2000 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring
JIS B 8008-2:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions at site
JIS B 8008-1:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
JIS B 8043-1:2000 Gas turbines -- Exhaust gas emission -- Part 1: Measurement and evaluation
JIS B 8008-1:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate emissions
JIS B 8008-1:2023 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement systems of gaseous and particulate emissions
JIS B 8008-11:2008 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
JIS D 0108:1985 Glossary of terms relating to control of air pollutions from automobile emissions
JIS B 8008-2:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
JIS B 8008-3:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
JIS B 8008-5:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 5: Test fuels
JIS B 8008-5:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 5: Test fuels
JIS B 8008-6:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 6: Test report
JIS B 8008-7:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 7: Engine family determination
JIS B 8008-8:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination
JIS B 8008-9:2004 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
JIS D 1047-1:2017 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 1: General test requirements
JIS B 8008-4:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Steady-state test cycles for different engine applications
JIS B 8008-4:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Test cycles for different engine applications

US-CFR-file, Exhaust Diluted Emissions

CFR 40-1065.240-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.240:Dilution air and diluted exhaust flow meters.
CFR 14-34.23-2013 Aeronautics and Space. Part34:Fuel venting and exhaust emission requirements for turbine engine powered airplanes. Section34.23:Exhaust emission standards for engines manufactured on and after july 18, 2012.
CFR 40-63.1316-2014 Protection of Environment. Part63:National emission standards for hazardous air pollutants for source categories (continued). Section63.1316:PET and polystyrene affected sources—emissions control provisions.
CFR 40-86.1823-08-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1823-08:Durability demonstration procedures for exhaust emissions.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Exhaust Diluted Emissions

ASHRAE CH-99-7-1-1999 Dilution Calculations for Determining Laboratory Exhaust Stack Heights

API - American Petroleum Institute, Exhaust Diluted Emissions

API PUBL 841-44700-1988 EXHAUST BENZENE EMISSIONS FROM LATE MODEL VEHICLES
API PUBL 4603-1994 Investigation of MOBILE5a Emission Factors: Assessment of Exhaust and Nonexhaust Emission Factor Methodologies and Oxygenate Effects
API PUBL 4680-1998 Amine Unit Air Emissions Model Evaluation
API PUBL 4470 VOL II-1988 Exhaust Benzene Emissions from Late Model Vehicles (Volume II)
API PUBL 931 C14-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 14 - WASTE GASES AND INCINERATION
API PUBL 931 C7-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS Chapter 7 - Hydrocarbon Emissions
API PUBL 931-1975 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS AND VOLUME ON LIQUID WASTES
API PUBL 931 C9-1977 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 9-SOURCES AND CONTROLS FOR EMISSIONS OF NITROGEN OXIDES
API PUBL 931 C15-1977 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 15-FLARES
API ATMOSPHERIC EMISSIONS-1980 ATMOSPHERIC EMISSIONS FROM OILY WASTE LANDSPREADING - FINAL REPORT
API PUBL 931 C1-1975 MANUAL ON DIPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS Chapter 1 - Introduction
API PUBL 931 C16-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 16-ODOR
API PUBL 931 C4-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 4-GAS FLOW MEASUREMENT METHODS
API PUBL 931 C11-1975 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 11-CYCLONE SEPARATORS
API PUBL 931 C8-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 8-SULFER/SULFER COMPOUNDS
API PUBL 931 C12-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 12 - ELECTROSTATIC PRECIPITATORS
API PUBL 931 C5-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 5-SAMPLING AND SURVEYS
API PUBL 931 C17-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 17-NOISE
API PUBL 4518-1990 Measurement of BTEX Emission Fluxes from Refinery Wastewater Impoundments Using Atmospheric Tracer Techniques
API PUBL 4436-1986 Study of the Effects of Gasoline Reid Vapor Pressure (RVP) on the Evaporative and Exhaust Emissions from In-Use Automobiles Phase II (Withdrawn)
API PUBL 931 C2-1977 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 2 PROPERTIES AND SOURCES OF AIR POLLUTANTS FROM REFINERIES
API 4124-1972 EFFECTS OF GASOLINE ADDITIVES ON CARBURETOR AND PCV SYSTEM PERFORMANCE AS THEY RELATE TO EXHAUST EMISSIONS
API 4056-1972 EFFECTS OF GASOLINE ADDITIVES ON CARBURETOR AND PCV SYSTEM PERFORMANCE AS THEY RELATE TO EXHAUST EMISSIONS
API 4056-1970 EFFECTS OF GASOLINE ADDITIVES ON CARBURETOR AND PCV SYSTEM PERFORMANCE AS THEY RELATE TO EXHAUST EMISSIONS

KR-KS, Exhaust Diluted Emissions

KS R ISO 8178-1-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS R ISO 8178-2-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS R ISO 8178-8-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination
KS R ISO 8178-7-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination
KS R ISO 8178-6-2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test
KS R ISO 8178-9-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition eng
KS R ISO PAS 3930-2014 Instruments for measuring vehicle exhaust emissions — Metrological and technical requirements; Metrological control and performance tests
KS R ISO 8178-4-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 4: Steady-state test cycles for different engine applications

Society of Automotive Engineers (SAE), Exhaust Diluted Emissions

SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions measurement
SAE J254-2011 Instrumentation and Techniques for Exhaust Gas Emissions measurement
SAE J1094-2011 Constant Volume Sampler System for Exhaust Emissions measurement
SAE J1094A-1978 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT
SAE J1094-1992 Constant Volume Sampler System for Exhaust Emissions Measurement, Information Report June 1992
SAE J1711-1999 Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles
SAE J1088-1993 (R) Test Procedure for the Measurement of Gaseous Exhaust Emissions from Small Utility Engines, Recommended Practice February 1993
SAE AIR1312-2002 EXHAUST EMISSION LIMITS FOR DIESEL ENGINES USED IN AIRCRAFT GROUND SUPPORT EQUIPMENT AT AIRPORT ENVIRONMENTS

SAE - SAE International, Exhaust Diluted Emissions

SAE J254-1971 INSTRUMENTATION AND TECHNIQUES FOR EXHAUST GAS EMISSIONS MEASUREMENT
SAE J254-1984 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
SAE J1088-2013 Test Procedure for the Measurement of Gaseous Exhaust Emissions from Small Utility Engines
SAE J1088-1983 Test Procedure for the Measurement of Exhaust Emissions from Small Utility Engines
SAE AIR1312-1975 EXHAUST EMISSION LIMITS FOR DIESEL ENGINES USED IN AIRCRAFT GROUND SUPPORT EQUIPMENT AT AIRPORT ENVIRONMENTS

German Institute for Standardization, Exhaust Diluted Emissions

DIN EN ISO 18854:2015-08 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015); German version EN ISO 18854:2015
DIN EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
DIN EN 16516:2020-10 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air; German version EN 16516:2017+A1:2020
DIN EN 16429:2021-05 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German version EN 16429:2021
DIN EN 16429:2020 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German and English version prEN 16429:2019
DIN EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German version EN 16429:2021
DIN EN 16516:2020 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air (includes Amendment :2020)
DIN EN 17416:2021-05 Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products; German version EN 17416:2021
DIN CEN/TS 16516:2013 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air; German version CEN/TS 16516:2013
DIN EN 17416:2019 Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products; German and English version prEN 17416:2019
DIN EN 17416:2021 Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products; German version EN 17416:2021
DIN EN ISO 13255:2018-01 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010); German version EN ISO 13255:2017

ES-UNE, Exhaust Diluted Emissions

UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
UNE-EN 16516:2018+A1:2021 Construction products: Assessment of release of dangerous substances - Determination of emissions of into indoor air
UNE-EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
UNE-EN 17416:2021 Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products
UNE-EN ISO 13255:2018 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)

GB-REG, Exhaust Diluted Emissions

REG 14 CFR PART 34-2012 Fuel venting and exhaust emission requirements for turbine engine powered airplanes
REG 40 CFR PART 600-2011 FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES

US-FCR, Exhaust Diluted Emissions

FCR UFGS-23 35 00.00 10-2009 OVERHEAD VEHICLE TAILPIPE [AND WELDING FUME] EXHAUST REMOVAL SYSTEM(S)

American Society for Testing and Materials (ASTM), Exhaust Diluted Emissions

ASTM E2515-09 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM E2515-07 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
ASTM E2515-11(2017) Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
ASTM F2826-14 Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units

American National Standards Institute （ANSI), Exhaust Diluted Emissions

ANSI/SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
ANSI/AWWA C512-2015 Air-Release@ Air/Vacuum@ and Combination Air Valves for Water and Wastewater Service
ANSI/ASTM F2826:2014 Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units

Indonesia Standards, Exhaust Diluted Emissions

Standard Association of Australia （SAA）, Exhaust Diluted Emissions

AS 2237:1979 Plastics fuel and emission control tube
AS 3761:1990 Vehicle exhaust system surface temperatures
AS/NZS 4013:1999 Domestic solid fuel burning appliances - Method for determination of flue gas emission

Shandong Provincial Standard of the People's Republic of China, Exhaust Diluted Emissions

DB37/ 006-1991 Discharge Standards of Waste Gas Pollutants in Shandong Province
DB37/T 2706-2015 Technical Specifications for Monitoring Low-concentration Exhaust Gases from Stationary Pollution Sources

Group Standards of the People's Republic of China, Exhaust Diluted Emissions

T/SHDSGY 163-2022 Cable combustion laboratory exhauste mission standards
T/QGCML 729-2023 Laboratory waste gas collection and treatment discharge technical regulations
T/SDEPI 026-2022 Guidelines for Acceptance of Power Consumption Monitoring System for Exhaust Emission Units
T/ACEF 002-2020 Technical specification for on-line monitoring of odor emitted from stationary sources
T/SDEPI 024-2022 Technical Guidelines for the Construction of Power Consumption Monitoring System for Exhaust Gas Emission Units
T/CAEPI 46-2022 Specifications for monitoring point setting of stationary source emission point
T/CAEPI 35-2021 Technical Guidelines for Data Acquisition Monitoring of Exhaust Gas Emission Process (Working Condition) in Catering Industry
T/GDC 143-2022 Fugitive emissions—Determination of volatile organic compounds metal oxide method
T/SDAS 209-2020 Technical specifications for waste gas emission during the fermentation process of harmless treatment of breeding manure
T/SXCAA 017-2022 Guidelines for the Construction and Operation of Remote Quality Control System for Continuous Monitoring Equipment of Exhaust Gas Emissions from Stationary Pollution Sources

CZ-CSN, Exhaust Diluted Emissions

CSN IEC 761-3:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 3: Specific requirements for noble gas effluent monitors
CSN IEC 761-2:1992 Equipment for continuously monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosol effluent monitors
CSN IEC 761-1:1992 Equipment for continuously monitoring radioactivity in gaseous effluents Part 1: General requirements
CSN IEC 761-6:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 6: Specific requirements for transuranic aerosol effluent monitors
CSN IEC 761-5:1993 Equipment for continuously monitoring radioactivity in gaseous effluents Part 5: Specific requirements for tritium effluent monitors
CSN IEC 761-4:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 4: Sepcific requirements for iodine monitors

American Society of Mechanical Engineers (ASME), Exhaust Diluted Emissions

ASME B133.9-1994 Measurement of exhaust emissions from stationary gas turbine engines
ASME B133.9-1994(R2001) Measurement of Exhaust Emissions from Stationary Gas Turbine Engines

VN-TCVN, Exhaust Diluted Emissions

TCVN 6438-2005 Road vehicles.Maximum permitted emission limits of exhaust gases
TCVN 6503-1-1999 Gas turbines.Exhaust gas emission.Part 1: Measurement and evaluation
TCVN 6204-2008 Road vehicles.Measurement methods for exhaust gas emissions during inspection or maintenance
TCVN 6440-1-2009 Motorcycles.Measurement method for gaseous exhaust emissions and fuel consumption.Part 1: General test requirements

IX-UIC, Exhaust Diluted Emissions

UIC O 624-2012 Exhaust emission tests for diesel traction engines

Federal Aviation Administration (FAA), Exhaust Diluted Emissions

FAA 14 CFR PART 34-2011 Fuel venting and exhaust emission requirements for turbine engine powered airplanes

Shanghai Provincial Standard of the People's Republic of China, Exhaust Diluted Emissions

DB31/ 767-2013 Air Pollutant Emission Standards for Hazardous Waste Incineration

Beijing Provincial Standard of the People's Republic of China, Exhaust Diluted Emissions

DB11/ 503-2007 Air Pollutant Emission Standards for Hazardous Waste Incineration

Hebei Provincial Standard of the People's Republic of China, Exhaust Diluted Emissions

DB13/T 2583-2017 Test method for exhaust gas emission from civil clean combustion stoves
DB13/T 5147-2019 Technical Requirements for Detection of Ozone Release from Organic Waste Gas Purification Devices

Danish Standards Foundation, Exhaust Diluted Emissions

DS/EN 16429:2021 Stationary source emissions – Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
DS/ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
DS/EN 17416:2021 Glass in building – Assessment of release of dangerous substances – Determination of emissions into indoor air from glass products
DS/ISO 23274-2:2021 Hybrid-electric road vehicles – Exhaust emissions and fuel consumption measurements – Part 2: Externally chargeable vehicles

European Committee for Standardization (CEN), Exhaust Diluted Emissions

EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
EN 16516:2017 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air
PD CEN/TS 16516:2013 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air
EN 17416:2021 Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products
CEN/TR 17304:2018 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air of ammonia from cellulose insulation at 90 % RH
EN 13526:2001 Stationary Source Emissions - Determination of the Mass Concentration of Total Gaseous Organic Carbon in Flue Gases From Solvent Using Processes - Continuous Flame Ionisation Detector Method

AT-ON, Exhaust Diluted Emissions

OENORM EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
OENORM EN 16516-2021 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air
OENORM EN 17416-2021 Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products

CH-SNV, Exhaust Diluted Emissions

SN EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere

IT-UNI, Exhaust Diluted Emissions

UNI EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
UNI EN 17416-2021 Glass in building - Assessment of release of dangerous substances - Determination of emissions into indoor air from glass products

Professional Standard - Environmental Protection, Exhaust Diluted Emissions

HJ 77.2-2008 Ambient air and flue gas.Determination of polychlorinated dibenzo-p-dioxins(PCDDS)and polychlorinated dibenzofurans(PCDFs).Isotope dilution HRGC-HRMS
HJ 77.3-2008 Solid waste.Determination of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs).Isotope dilution HRGC-HRMS

U.S. Environmental Protection Agency (U.S. EPA), Exhaust Diluted Emissions

EPA 40 CFR PART 600-2010 FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES

Henan Provincial Standard of the People's Republic of China, Exhaust Diluted Emissions

DB41/T 2199-2021 Technical specifications for continuous monitoring of ammonia emissions from stationary pollution sources

PL-PKN, Exhaust Diluted Emissions

PN-EN 16516+A1-2020-12 E Construction products: Assessment of release of dangerous substances -- Determination of emissions into indoor air
PN-EN 16429-2021-08 E Stationary source emissions -- Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
PN-EN 17416-2021-08 E Glass in building -- Assessment of release of dangerous substances -- Determination of emissions into indoor air from glass products

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Exhaust Diluted Emissions

GB 17691-2001 Limits and measurement methods for exhaust pollutants from compression ignition(C.I.) engines of vehicles
GB 3847-2005 Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E.
GB 20891-2007 Limits and measurement methods for exhaust pollutants from diesel engines of non-road mobile machinery (Ⅰ、Ⅱ)
GB 18285-2005 Limits and measurement methods for exhaust pollutants from vehicles equipped ignition engine under two-speed idle conditions and simple driving mode conditions
GB 14762-2002 Limits and measurement methods for exhaust pollutants from positive ignition(P.I.)engines of vehicles and vehicles equipped with P.Iengines

GOSTR, Exhaust Diluted Emissions

GOST R ISO 8178-5-2017 Reciprocating internal combustion engines. Exhaust emission measurement. Part 5. Test fuels
GOST 34471.6-2018 Reciprocating internal combustion engines. Exhaust emission measurement. Part 6. Report of measuring results and test
GOST 24585-1981 Marine, locomotive and commercial diesels. Emission of harmful substances with exhaust gases. Permissible values and measurement methods

CEN - European Committee for Standardization, Exhaust Diluted Emissions

EN 16516:2017/PRA1:2019 Construction products: Assessment of release of dangerous substances - Determination of emissions of into indoor air
PD CEN/TR 17304:2018 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air of ammonia from cellulose insulation at 90 % RH

BELST, Exhaust Diluted Emissions

STB 17.08.05-01-2016 Environmental Protection and Nature Use. Air. Methods for determination of atmospheric humidity of gas emissions, released into the atmosphere from stationary sources of pollution
STB 17.08.05-02-2016 Environmental Protection and Nature Use. Air. Methods for determination of velocity and flowrate of gas emissions, released into the atmosphere from stationary sources of pollution
STB 17.08.05-03-2016 Environmental Protection and Nature Use. Air. Methods for determination of pressure and temperature of gas emissions, released into the atmosphere from stationary sources of pollution

Zhejiang Provincial Standard of the People's Republic of China, Exhaust Diluted Emissions

DB33/T 2167-2018 Technical specification for low-concentration emission monitoring of waste gas from stationary pollution sources in coal-fired power plants

TH-TISI, Exhaust Diluted Emissions

TIS 1727-1998 Road vehicles.measurement methods for exhaust gas emissions during inspection or maintenace

HU-MSZT, Exhaust Diluted Emissions

MSZ 21869/3-1981

National Aeronautics and Space Administration (NASA), Exhaust Diluted Emissions

NASA-STD-(I)-6001 REV A-2008 FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES (NASA Interim Standard)

Liaoning Provincial Standard of the People's Republic of China, Exhaust Diluted Emissions

DB21/T 3793-2023 Technical Specifications for Low Concentration Emission Monitoring of Stationary Pollution Source Exhaust Gas from Coal-fired Power Plants in Liaoning Province

Canadian Standards Association (CSA), Exhaust Diluted Emissions

CSA N288.1-08-2008 Guidelines for calculating derived release limits for radioactive material in airborne and liquid effluents for normal operation of nuclear facilities
CSA N288.1-M87-CAN/CSA-1987 Guidelines for Calculating Derived Release Limits for Radioactive Material in Airborne and Liquid Effluents for Normal Operation of Nuclear Facilities General Instruction No 1

RO-ASRO, Exhaust Diluted Emissions

STAS SR ISO 8178-3:1996 Reciprocating internai combustion engines - Exhaust emission measurement - Part 3: Definitions and methods of measure-ment of exhaust gas smoke under steady-state conditions