ZH
RU
ES

plastic waste emissions

plastic waste emissions, Total:497 items.

In the international standard classification, plastic waste emissions involves: Pipeline components and pipelines, Internal combustion engines, Internal combustion engines for road vehicles, Vocabularies, Installations in buildings, External sewage systems, Air quality, Gas and steam turbines. Steam engines, Domestic, commercial and industrial heating appliances, Wastes, Environmental protection, Valves, Equipment for the rubber and plastics industries, Rubber and plastics products, Motor cycles and mopeds, Road vehicles in general, Plastics, Electric road vehicles, Seals, glands, Materials for aerospace construction, Aerospace electric equipment and systems, Diagnostic, maintenance and test equipment, Farming and forestry, Floor treatment appliances, Shipbuilding and marine structures in general, Insulating materials, Railway engineering in general, Railway rolling stock, Radiation protection, Nuclear energy engineering, Analytical chemistry, Passenger cars. Caravans and light trailers.

Standard Association of Australia （SAA）, plastic waste emissions

AS 2237:1979 Plastics fuel and emission control tube
AS/NZS 4013:1999 Domestic solid fuel burning appliances - Method for determination of flue gas emission
AS 3761:1990 Vehicle exhaust system surface temperatures
AS/NZS 7671:2010

British Standards Institution (BSI), plastic waste emissions

BS ISO 11042-2:1996 Gas turbines. Exhaust gas emission. Automated emission monitoring
BS ISO 8178-1:2017 Reciprocating internal combustion engines. Exhaust emission measurement. Test-bed measurement systems of gaseous and particulate emissions
BS ISO 11042-2:1997 Gas turbines - Exhaust gas emission - Automated emission monitoring
BS ISO 8178-5:2015 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
BS ISO 8178-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Test fuels
BS ISO 11042-1:1996 Gas turbines. Exhaust gas emission. Measurement and evaluation
BS ISO 8178-2:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
BS EN ISO 13255:2017 Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for airtightness of joints
BS ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions
BS ISO 8178-5:2021 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Test fuels
21/30426008 DC BS ISO 8178-2. Reciprocating internal combustion engines. Exhaust emission measurement. Part 2. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-1:2020 Reciprocating internal combustion engines. Exhaust emission measurement - Test-bed measurement systems of gaseous and particulate emissions
BS ISO 8178-3:1996 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 8178-3:1994 Reciprocating internal combustion engines - Exhaust emission measurement - Definitions and methods of measurement of exhaust gas smoke under steady state conditions
BS ISO 11042-1:1997 Gas turbines - Exhaust gas emission - Measurement and evaluation
BS ISO 6460-3:2007+A2:2022 Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption - Fuel consumption measurement at a constant speed
BS ISO 8178-2:2009 Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Measurement of gaseous and particulate exhaust emissions under field conditions
BS ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - General test requirements
BS ISO 6460-3:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Fuel consumption measurement at a constant speed
DD ENV 13801-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
BS ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
BS ISO 6855-1:2012 Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption. General test requirements
19/30387221 DC BS ISO 8178-5. Reciprocating internal combustion engines. Exhaust emission measurement. Part 5. Test fuels
BS ISO 8178-3:2019 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
BS ISO 19449:2015 Mopeds. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS 6069-4.2:1991 Characterization of air quality - Stationary source emissions - Method for the determination of asbestos plant emissions by fibre count measurement
19/30395228 DC BS EN 16429. Stationary source emissions. Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
BS ISO 8178-9:2019 Reciprocating internal combustion engines. Exhaust emission measurement - Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
BS ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Test cycles and specific test conditions
BS ISO 23274-2:2012 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Externally chargeable vehicle
BS ISO 6460-2:2014 Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. Test cycles and specific test conditions
BS ISO 23274-2:2021 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Externally chargeable vehicles
BS EN 16429:2021 Tracked Changes. Stationary source emissions. Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
BS 7158:2001 Plastics inspection chambers for drains and sewers - Specification
DD ENV 1401-2-2001 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U). Guidance for assessment of conformity
BS ISO 6855-3:2012 Mopeds. Measurement method for gaseous exhaust emissions and fuel consumption. Fuel consumption measurement at a constant speed
19/30387314 DC BS ISO 8178-1 AMD1. Reciprocating internal combustion engines. Exhaust emission measurement. Part 1. Test-bed measurement systems of gaseous and particulate emissions
BS ISO 23274-1:2013 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Non-externally chargeable vehicles
BS ISO 6460-1:2022 Tracked Changes. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. General test requirements
BS ISO 17479:2013+A1:2020 Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS DD ENV 1852-2:2001 Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Guidance for the assessment of conformity
BS ISO 23274-1:2019 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles
BS ISO 8178-6:2018 Reciprocating internal combustion engines. Exhaust emission measurement - Report of measuring results and test
BS EN ISO 3994:2011 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
BS EN ISO 3994:2014 Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials Specification
BS ISO 16183:2002 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS 6069 Sec.4.2:1991 Characterization of air quality. Stationary source emissions. Method for the determination of asbestos plant emissions by fibre count measurement
BS EN ISO 8178-6:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and tests
BS ISO 8178-6:2001 Reciprocating internal combustion engines. Exhaust emission measurement. Report of measuring results and test
BS ISO 8178-6:2000 Reciprocating internal combustion engines - Exhaust emission measurement - Report of measuring results and test
BS ISO 8178-8:2015 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Engine group determination
DD ENV 1451-2-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
DD ENV 1519-2-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Guidance for the assessment of conformity
DD ENV 1329-2-2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
22/30451104 DC BS ISO 6460-3:2007 AMD2. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption - Part 3. Fuel consumption measurement at a constant speed
BS PD CEN/TS 1329-2:2021 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
BS ISO 8178-8:1997 Reciprocating internal combustion engines - Exhaust emission measurement - Engine group determination
BS ISO 8178-7:1997 Reciprocating internal combustion engines - Exhaust emission measurement - Engine family determination
BS ISO 3929:2003 Road vehicles. Measurement methods for exhaust gas emissions during inspection or maintenance
BS ISO 8178-7:2015 Tracked Changes. Reciprocating internal combustion engines. Exhaust emission measurement. Engine family determination
21/30384598 DC BS ISO 6460-1. Motorcycles. Measurement method for gaseous exhaust emissions and fuel consumption. Part 1. General test requirements
BS PD CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
BS 7655-6.1:1997 Specification for insulating and sheathing materials for cables - Thermoplastic sheathing compounds having low emission of corrosive gases, and suitable for use in cables having low emission of smoke when affected by fire - General application thermoplast
19/30392436 DC BS ISO 17479 AMD1. Motorcycles. Measurement methods for gaseous exhaust emissions during inspection or maintenance
BS EN 1329-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system
BS ISO 19220:2021 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings. Styrene copolymer blends (SAN + PVC)
PD CEN/TS 1451-2:2019 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Guidance for the assessment of conformity
BS EN 1519-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE). Specifications for pipes, fittings and the system
BS EN 1451-1:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP). Specifications for pipes, fittings and the system
BS EN 15012:2008 Plastics piping systems. Soil and waste discharge systems within the building structure. Performance characteristics for pipes, fittings and their joints
BS EN 15012:2007 Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints
20/30419419 DC BS ISO 19220. Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings. Styrene copolymer blends (SAN + PVC)
BS ISO 7967-12:2022 Tracked Changes. Reciprocating internal combustion engines. Vocabulary of components and systems. Exhaust emission control systems
BS ISO 8178-4:2007 Reciprocating internal combustion engines - Exhaust emission measurement - Steady-state test cycles for different engine applications
BS EN 1451-1:2017 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) - Specifications for pipes, fittings and the system
DD ENV 1453-2-2001 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
BS DD ENV 1453-2:2001 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
BS PD CEN/TS 1453-2:2017 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Guidance for the assessment of conformity
BS ISO 8178-9:2001 Reciprocating internal combustion engines - Exhaust emission measurement - Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transi ent conditions
BS ISO 8178-9:2012 Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions

Danish Standards Foundation, plastic waste emissions

DS/INF 161:2004 Plastics pipes - Soil and waste discharge, sewerage and drainage - Glossary of terms
DS/EN 1054:1996 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints
DS/EN 1055:1997 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
DS/EN 16429:2021 Stationary source emissions – Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
DS/ENV 13801:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
DS/EN ISO 3994:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
DS/ISO 17479:2013 Motorcycles - Measurement methods for gaseous exhaust emissions during inspection or maintenance
DS/ISO 6855-3:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
DS/ISO 23274-2:2012 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 2: Externally chargeable vehicles
DS/ISO 6855-1:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
DS/ISO 6808:1988 Plastic hoses for suction and low-pressure discharge. Petroleum liquids. Specification
DS/ISO 23274-1:2013 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 1: Non-externally chargeable vehicles
DS/ISO 19220:2021 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings – Styrene copolymer blends (SAN + PVC)
DS/CEN/TS 1329-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
DS/CEN/TS 1329-2:2021 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Unplasticized poly(vinyl chloride) (PVC-U) – Part 2: Guidance for the assessment of conformity
DS/ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions

RU-GOST R, plastic waste emissions

GOST R 52408-2005 Reciprocating internal combustion engines. Exhaust emission. Part 2. Measurement of exhaust emission at site
GOST R 52408-2014 Reciprocating internal combustion engines. Exhaust emission and visible pollutants. Measurement of exhaust emission at site
GOST R ISO 11042-1-2001 Gas turbines. Methods of exhaust gas emission determinations
GOST ISO 8178-11-2015 Reciprocating internal combustion engines. Exhaust emission measurement. Part 11. Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
GOST 32412-2013 Unplasticized polyvinylchloride pipes and fittings for waste discharge inside the buildings. Specifications
GOST R ISO 23274-2013 Hybrid-electric road vehicles. Exhaust emissions and fuel consumption measurements. Non-externally chargeable vehicles
GOST R 51249-1999 Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods
GOST R 50953-2008 Emission of the exhaust gas pollutants by the main-line and shunting diesel locomotives. Norms and determination methods
GOST R 50953-1996 Emission of the exhaust gas pollutants by the main line and shunting diesel locomotives. Norms and determination methods
GOST 31967-2012 Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods
GOST R 54942-2012 Gas fuel motor vehicles with spark ignition engines. Emission of the exhaust gas pollutants. Norms and methods of the control for estimation of technical condition
GOST R 17.2.2.07-2000 Nature protection. Atmosphere. Engines for minitractors and minimecanical objects. Rates and testing methods of exhaust emission and smoke
GOST R 54129-2010 Emission of the exhaust gas pollutants by the main-line and shunting for the special-purpose rolling stock. Norms and determination methods

German Institute for Standardization, plastic waste emissions

DIN EN 1455-1:1999-12 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999 / Note: DIN ...
DIN EN 1566-1:2020-08 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Requirements for pipes, fittings and the system; German and English version prEN 1566-1:2...
DIN EN 1566-1:1999-12 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998 / Note: ...
DIN CEN/TS 1455-2:2012-09*DIN SPEC 19579:2012-09 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1455-2:2012 / Note: Applies...
DIN CEN/TS 1566-2:2012-09*DIN SPEC 19582:2012-09 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1566-2:2012 / Note: Appl...
DIN CEN/TS 1329-2:2018-08*DIN SPEC 19577:2018-08 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1329-2:2018 / Note: Ap...
DIN EN 1455-1:2020-08 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system; German and English version prEN 1455-1:2020...
DIN EN ISO 13255:2018-01 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010); German version EN ISO 13255:2017
DIN EN ISO 18854:2015-08 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015); German version EN ISO 18854:2015
DIN EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
DIN EN ISO 13255:2018 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
DIN 3543-3:1978 PVC tapping valves for plastic pipes; dimensions
DIN EN 1453-1:2017-09 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system; German version EN 1453-1:2017 + ...
DIN CEN/TR 13801:2014-07*DIN SPEC 19637:2014-07 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation; German version CEN/TR 13801:2014
DIN EN 16429:2021-05 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German version EN 16429:2021
DIN EN 16429:2020 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German and English version prEN 16429:2019
DIN V ENV 13801:2001 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation; German version ENV 13801:2001
DIN EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere; German version EN 16429:2021
DIN EN ISO 3994:2015-11 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014); German version EN ISO 3994:2014
DIN EN 15012:2008 Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints; English version of DIN EN 15012:2008-02
DIN 25466:1995 Fume hoods for radioactive materials - Rules for construction and tests
DIN 25466:2012 Fume hoods for radioactive materials - Rules for construction and tests
DIN CEN/TS 1519-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1519-2:2012

ES-UNE, plastic waste emissions

UNE-CEN/TS 1329-2:2021 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normali...
UNE-CEN/TS 1519-2:2020 Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 20...
UNE-EN ISO 13255:2018 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints (ISO 13255:2010)
UNE-EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO 18854:2015)
UNE-EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere

SE-SIS, plastic waste emissions

SIS SS 3638-1990 Plastics pipes — Sealing rings of thermoplastic elastomers ITPE) for plastic discharge, drainage and sewage pipe systems

Association Francaise de Normalisation, plastic waste emissions

NF E37-504-2*NF ISO 11042-2:2016 Gaz turbines - Exhaust gas emission - Part 2 : automated emission monitoring
NF R10-019*NF ISO 3930:2001 Instruments for measuring vehicle exhaust emissions
NF J95-067*NF EN ISO 18854:2015 Small craft - Reciprocating internal combustion engines exhaust emission measutrement - Test-bed measurement of gaseous and particulate exhaust emissions
NF E37-504-2:1999 Gas turbines - Exhaust gas emission - Part 2 : automated emission monitoring.
NF T54-902*NF EN ISO 13255:2017 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
NF E37-211-2*NF ISO 8178-2:2022 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions
NF E37-211-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF E37-211-1:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.
NF E37-211-5:1997 Reciprocating internal combustion engines. Exhaust emission measurement. Part 5 : test fuels.
NF E37-211-5*NF ISO 8178-5:2021 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5 : test fuels
NF ISO 8178-5:2021 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 5 : carburants d'essai
NF ISO 8178-2:2022 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 2 : mesurage des émissions de gaz et de particules sur site
NF E37-504-1:1999 Gas turbines - Exhaust gas emission - Part 1 : measurement and evaluation.
NF E37-504-1*NF ISO 11042-1:2016 Gaz turbines - Exhaust gas emission - Part 1 : measurement and evaluation
NF E37-211-2:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.
NF T54-902:1995 Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints.
NF ISO 8178-1:2020 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 1 : mesurage des émissions de gaz et de particules au banc d'essai
NF ISO 8178-9:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 9 : cycles et procédures d'essai pour le mesurage au banc d'essai des émissions de fumées de gaz d'échappement des moteurs alternatifs à combust...
NF X43-134*NF EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
NF E37-211-5:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 5 : test fuels.
NF E37-211-1*NF ISO 8178-1:2020 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1 : test-bed measurement systems of gaseous and particulate emissions
NF E37-211-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions.
NF E37-211-9*NF ISO 8178-9:2019 Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 : test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
NF X43-317:2011 Émissions de sources fixes - Détermination de l'indice de pollution acide ou alcaline des effluents gazeux
NF R10-018*NF ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
NF R10-018:1996 Road vehicles. Measurement procedures for exhaust gas emissions during inspection or maintenance.
NF T54-903:1996 Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling.
NF ISO 8178-3:2019 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 3 : définitions et méthodes de mesure de la fumée des gaz d'échappement dans des conditions stabilisées
NF P41-213:1993 DTU 60.33 - Building works - Unplasticized polyvinyl chloride piping installations - Waste water drainage - Technical specifications.
NF T47-265:2011 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification.
NF T47-265*NF EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
NF DTU 60.33 P1-2:2007 Travaux de bâtiment - Canalisations en polychlorure de vinyle non plastifié - Évacuation d'eaux usées et d'eaux vannes - Partie 1-2 : critères généraux de choix des matériaux
NF E37-211-8*NF ISO 8178-8:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 8 : engine group determination
NF E37-211-7*NF ISO 8178-7:2015 Reciprocating internal combustion engines - Exhaust emission measurement - Part 7 : engine family determination
NF ISO 8178-6:2018 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 6 : rapport de mesure et d'essai
NF ISO 8178-8:2015 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 8 : détermination des groupes de moteurs
NF T54-977:2008 Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints.
NF DTU 60.33 P1-1:2007 Travaux de bâtiment - Canalisations en polychlorure de vinyle non plastifié - Évacuation d'eaux usées et d'eaux vannes - Partie 1-1 : cahier des clauses techniques
NF D35-372*NF EN 1266:2003 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases.
NF D35-372/A1*NF EN 1266/A1:2005 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
NF E37-211-6:2010 Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test.
NF E37-002-12*NF ISO 7967-12:2015 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 12 : exhaust emission control systems
NF E37-211-6*NF ISO 8178-6:2018 Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test
NF ISO 8178-7:2015 Moteurs alternatifs à combustion interne - Mesurage des émissions de gaz d'échappement - Partie 7 : détermination des familles de moteurs
NF ISO 7967-12:2022 Moteurs alternatifs à combustion interne - Vocabulaire des composants et des systèmes - Partie 12 : systèmes de contrôle des émissions de gaz d'échappement
NF T54-017:1981 Plastics. Un-plasticized pipes and fittings for domestic water drainage installations. Specifications.
NF R10-019:1996 Road vehicles. Measurement equipment for exhaust gas emissions during inspection or maintenance. Technical specifications.

Korean Agency for Technology and Standards (KATS), plastic waste emissions

KS B ISO 11042-2-2015(2020) Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS B ISO 11042-2:2005 Gas turbines-Exhaust gas emission-Part 2:Automated emission monitoring
KS B ISO 11042-2:2015 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
KS R ISO 8178-1:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS R ISO 8178-2:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS B ISO 11042-1:2015 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
KS B ISO 11042-1:2005 Gas turbines-Exhaust gas emission-Part 1:Measurement and evaluation
KS B ISO 11042-1-2015(2020) Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
KS B ISO 8178-11:2008 Reciprocating internal combustion engines－Exhaust emission measurement－Part 11：Test bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
KS M ISO 3633-2012(2022) Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride) (PVC-U)
KS M ISO 3633-2012(2017) Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride) (PVC-U)
KS M ISO 3633:2012 Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Unplasticized poly(vinyl chloride) (PVC-U)
KS R 0122-2018 Road vehicles — Exhaust emissions and fuel consumption measurements for externally chargeable hybrid electric vehicles
KS R 1046-2001(2011) Road vehicles?Measurement methods for exhaust gasemissions during inspection or maintenance
KS R ISO 16185-2006(2016) Road vehicles－Engine families for certification ofheavy－duty vehicles－Exhaust emissions
KS R ISO 16185-2006(2021) Road vehicles－Engine families for certification ofheavy－duty vehicles－Exhaust emissions
KS R ISO 3929-2006(2021) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 3929-2006(2016) Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS M ISO 7682:2009 Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings－Acrylonitrile-butadiene-styrene(ABS)
KS M ISO 7682:2019 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene(ABS)
KS R ISO 8178-3-2007(2022) Reciprocating internal combustion engines－Exhaust emission measurement－Part 3：Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
KS R ISO 3929:2006 Road vehicles－Measurement methods for exhaust gas emissions during inspection or maintenance
KS R ISO 8178-8:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination
KS R ISO 8178-5:2018 Reciprocating internal combustion engines－Exhaust emission measurement－Part 5：Test fuels
KS M ISO TR 7074:2003 Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
KS R ISO 8178-7:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination
KS R ISO 8178-6:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test
KS R ISO 8178-9:2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition eng

Japanese Industrial Standards Committee (JISC), plastic waste emissions

JIS B 8043-2:2000 Gas turbines -- Exhaust gas emission -- Part 2: Automated emission monitoring
JIS B 8008-2:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions at site
JIS B 8008-1:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
JIS B 8008-5:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 5: Test fuels
JIS B 8043-1:2000 Gas turbines -- Exhaust gas emission -- Part 1: Measurement and evaluation
JIS B 8008-1:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate emissions
JIS B 8008-1:2023 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement systems of gaseous and particulate emissions
JIS B 8008-11:2008 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
JIS D 0108:1985 Glossary of terms relating to control of air pollutions from automobile emissions
JIS B 8008-2:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
JIS B 8008-3:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
JIS D 1047-1:2017 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 1: General test requirements
JIS B 8008-5:2009 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 5: Test fuels
JIS B 8008-6:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 6: Test report
JIS B 8008-7:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 7: Engine family determination
JIS B 8008-8:2000 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 8: Engine group determination
JIS D 1047-3:2017 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 3: Fuel consumption measurement at a constant speed
JIS B 8008-9:2004 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
JIS D 1047-2:2017 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 2: Test cycles and specific test conditions
JIS K 7217:1983 Analytical method for determining gases evolved from burning plastics
JIS A 4101:1994 Construction parts of glassfiber reinforced plastic water closet wastes disposal plant

未注明发布机构, plastic waste emissions

BS ISO 11042-2:1996(2000) Gas turbines — Exhaust gas emission — Part 2 : Automated emission monitoring
DIN EN ISO 8178-1:1996 Reciprocating internal combustion engines, Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
DIN EN ISO 8178-5:1999 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
BS ISO 11042-1:1996(2000) Gas turbines — Exhaust gas emission — Part 1 : Measurement and evaluation
BS ISO 8178-10:2002(2003) Reciprocating internal combustion engines — Exhaust emission measurement — Part 10 : Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
BS 3841-2:1994(1999) Determination of smoke emission from manufactured solid fuels for domestic use — Part 2 : Methods for measuring the smoke emission rate
BS 3841-1:1994(1999) Determination of smoke emission from manufactured solid fuels for domestic use — Part 1 : General method for determination of smoke emission rate
BS ISO 16183:2002(2003) Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions

International Organization for Standardization (ISO), plastic waste emissions

ISO 11042-2:1996 Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
ISO 8178-1:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
ISO 8178-1:2017 Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 3930:2000 Instruments for measuring vehicle exhaust emissions
ISO 8178-2:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO 8178-2:2008 Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
ISO 8772:2006 Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE)
ISO 8178-5:2021 Reciprocating internal combustion engines — Exhaust emission measurement — Part 5: Test fuels
ISO/TS 7024:2005 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Thermoplastics - Recommended practice for installation
ISO 11042-1:1996 Gas turbines - Exhaust gas emission - Part 1: Measurement and evaluation
ISO 8770:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
ISO 7671:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP)
ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
ISO 3633:1991 Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings; specifications
ISO 13255:2010 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
ISO 8178-1:2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement systems of gaseous and particulate emissions
ISO 7675:2003 Plastic piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)
ISO 8178-3:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type
ISO 8178-9:2019 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines usin
ISO 6460-1:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
ISO 3633:2002 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U)
ISO 23274:2007 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Non-externally chargeable vehicles
ISO 19449:2015 Mopeds — Measurement methods for gaseous exhaust emissions during inspection or maintenance
ISO 19220:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Styrene copolymer blends (SAN + PVC)
ISO 19220:2021 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Styrene copolymer blends (SAN + PVC)
ISO 6460-3:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed
ISO 7682:2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)
ISO 6855-1:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements
ISO 3994:2007 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (Fourth Edition)
ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification
ISO 6460-1:2007/Amd 1:2015 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 1: General test requirements; Amendment 1
ISO 23274-2:2012 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 2: Externally chargeable vehicles
ISO 23274-2:2021 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 2: Externally chargeable vehicles
ISO/TR 7074:1986 Performance requirements for plastics pipes and fittings for use in underground drainage and sewage
ISO 3929:2003 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance
ISO 3929:1995 Road vehicles - Measurement methods for exhaust gas emmissions during inspection or maintenance
ISO 23274-1:2013 Hybrid-electric road vehicles - Exhaust emissions and fuel consumption measurements - Part 1: Non-externally chargeable vehicles
ISO 6460-3:2007/Amd 1:2015 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 3: Fuel consumption measurement at a constant speed; Amendment 1
ISO 6808:1984 Plastics hoses for suction and low-pressure discharge; Petroleum liquids; Specification
ISO 6460-2:2007 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
ISO 6460-2:2014 Motorcycles - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
ISO 6855-2:2012 Mopeds - Measurement method for gaseous exhaust emissions and fuel consumption - Part 2: Test cycles and specific test conditions
ISO 7967-12:2022 Reciprocating internal combustion engines — Vocabulary of components and systems — Part 12: Exhaust emission control systems

Federal Aviation Administration (FAA), plastic waste emissions

FAA 14 CFR PART 34-2011 Fuel venting and exhaust emission requirements for turbine engine powered airplanes

American Society for Testing and Materials (ASTM), plastic waste emissions

ASTM F2135-01 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
ASTM F2135-01(2017) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
ASTM F2135-01(2012) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
ASTM F2135-01(2017)e1 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
ASTM D3311-08 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-11 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D2665-02a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665-20 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM F2536-06b(2011) Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
ASTM F2536-17 Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
ASTM F628-12e3 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core (Withdrawn 2021)
ASTM D2661-14e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D3311-09 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-92 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-94 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-17(2021) Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-22 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D2949-01ae1 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM F628-06e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
ASTM C1440-21 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
ASTM C1440-99e1 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
ASTM D3311-02 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-02e1 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-06a Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-06 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-09a Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-11(2016) Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM D3311-17 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ASTM F2135-01(2022) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
ASTM C1440-17 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
ASTM F2390-12(2017) Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
ASTM D2665-78 Standard Specification for Poly(inyl Chloride) (PVC) Plastic Drain, Waste, And Vent Pipe And Fittings
ASTM D2665-91 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665-91a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665-91b Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665-08 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665-08a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665-08b Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM C1304-95 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
ASTM C1304-18 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
ASTM D2665-01 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665-00 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665-10 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665-11 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2665-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM F2826-14 Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units

API - American Petroleum Institute, plastic waste emissions

API PUBL 841-44700-1988 EXHAUST BENZENE EMISSIONS FROM LATE MODEL VEHICLES
API PUBL 4603-1994 Investigation of MOBILE5a Emission Factors: Assessment of Exhaust and Nonexhaust Emission Factor Methodologies and Oxygenate Effects
API PUBL 4680-1998 Amine Unit Air Emissions Model Evaluation
API PUBL 4470 VOL II-1988 Exhaust Benzene Emissions from Late Model Vehicles (Volume II)
API PUBL 931 C14-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 14 - WASTE GASES AND INCINERATION
API PUBL 931 C7-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS Chapter 7 - Hydrocarbon Emissions
API PUBL 931-1975 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS AND VOLUME ON LIQUID WASTES
API PUBL 931 C9-1977 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 9-SOURCES AND CONTROLS FOR EMISSIONS OF NITROGEN OXIDES
API PUBL 931 C15-1977 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 15-FLARES
API ATMOSPHERIC EMISSIONS-1980 ATMOSPHERIC EMISSIONS FROM OILY WASTE LANDSPREADING - FINAL REPORT
API PUBL 931 C1-1975 MANUAL ON DIPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS Chapter 1 - Introduction
API PUBL 931 C16-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 16-ODOR
API PUBL 931 C4-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 4-GAS FLOW MEASUREMENT METHODS
API PUBL 931 C11-1975 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 11-CYCLONE SEPARATORS
API PUBL 931 C8-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 8-SULFER/SULFER COMPOUNDS
API PUBL 931 C12-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 12 - ELECTROSTATIC PRECIPITATORS
API PUBL 931 C5-1976 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS CHAPTER 5-SAMPLING AND SURVEYS
API PUBL 931 C17-1974 MANUAL ON DISPOSAL OF REFINERY WASTES VOLUME ON ATMOSPHERIC EMISSIONS - CHAPTER 17-NOISE
API PUBL 4518-1990 Measurement of BTEX Emission Fluxes from Refinery Wastewater Impoundments Using Atmospheric Tracer Techniques
API PUBL 4436-1986 Study of the Effects of Gasoline Reid Vapor Pressure (RVP) on the Evaporative and Exhaust Emissions from In-Use Automobiles Phase II (Withdrawn)

Lithuanian Standards Office , plastic waste emissions

LST EN 1054-2002 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints
LST EN 1055-2002 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
LST L ENV 13801-2002 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
LST EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
LST ISO 7671:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP) (idt ISO 7671:2003)
LST EN 15012-2008 Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints
LST ISO 3929:2004 Road vehicles - Measurement methods for exhaust gas emissions during inspection or maintenance (idt ISO 3929:2003)
LST ISO 16183:2006 Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions (identical ISO 16183:2002)
LST CEN/TS 1329-2-2021 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
LST ISO 16185:2006 Road vehicles - Engine families for certification of heavy-duty vehicles by Exhaust emission (identical ISO 16185:2000)

AENOR, plastic waste emissions

UNE-EN 1054:1996 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints
UNE-EN 1055:1996 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
UNE 53944:2011 IN Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation.
UNE-EN ISO 3994:2014 Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
UNE-EN 15012:2008 Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints
UNE-ENV 1329-2:2002 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity.

KR-KS, plastic waste emissions

KS R ISO 8178-1-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
KS R ISO 8178-2-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
KS M ISO 7682-2019 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Acrylonitrile-butadiene-styrene(ABS)
KS R ISO 8178-8-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 8: Engine group determination
KS R ISO 8178-5-2018 Reciprocating internal combustion engines－Exhaust emission measurement－Part 5：Test fuels
KS R ISO 8178-7-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 7: Engine family determination
KS R ISO 8178-6-2020 Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test
KS R ISO 8178-9-2018 Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition eng

Society of Automotive Engineers (SAE), plastic waste emissions

SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions measurement
SAE J254-2011 Instrumentation and Techniques for Exhaust Gas Emissions measurement
SAE J1094-2011 Constant Volume Sampler System for Exhaust Emissions measurement
SAE J1094A-1978 CONSTANT VOLUME SAMPLER SYSTEM FOR EXHAUST EMISSIONS MEASUREMENT
SAE ARP6229-2012 Fluoride Offgassing in Fluoropolymer Insulations
SAE J1094-1992 Constant Volume Sampler System for Exhaust Emissions Measurement, Information Report June 1992
SAE J1711-1999 Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles
SAE J1088-1993 (R) Test Procedure for the Measurement of Gaseous Exhaust Emissions from Small Utility Engines, Recommended Practice February 1993

SAE - SAE International, plastic waste emissions

SAE J254-1971 INSTRUMENTATION AND TECHNIQUES FOR EXHAUST GAS EMISSIONS MEASUREMENT
SAE J254-1984 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
SAE J1088-2013 Test Procedure for the Measurement of Gaseous Exhaust Emissions from Small Utility Engines
SAE J1088-1983 Test Procedure for the Measurement of Exhaust Emissions from Small Utility Engines

GB-REG, plastic waste emissions

REG 14 CFR PART 34-2012 Fuel venting and exhaust emission requirements for turbine engine powered airplanes
REG 40 CFR PART 600-2011 FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES

US-FCR, plastic waste emissions

FCR UFGS-23 35 00.00 10-2009 OVERHEAD VEHICLE TAILPIPE [AND WELDING FUME] EXHAUST REMOVAL SYSTEM(S)

American National Standards Institute （ANSI), plastic waste emissions

ANSI/SAE J254-1993 Instrumentation and Techniques for Exhaust Gas Emissions Measurement
ANSI/ASTM D2661:2014 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain@ Waste@ and Vent Pipe and Fittings
ANSI/ASTM D3311:2011 Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
ANSI/ASTM F2826:2014 Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units

Indonesia Standards, plastic waste emissions

Shandong Provincial Standard of the People's Republic of China, plastic waste emissions

DB37/ 006-1991 Discharge Standards of Waste Gas Pollutants in Shandong Province
DB37/T 2706-2015 Technical Specifications for Monitoring Low-concentration Exhaust Gases from Stationary Pollution Sources

Group Standards of the People's Republic of China, plastic waste emissions

T/SHDSGY 163-2022 Cable combustion laboratory exhauste mission standards
T/QGCML 729-2023 Laboratory waste gas collection and treatment discharge technical regulations
T/SDEPI 026-2022 Guidelines for Acceptance of Power Consumption Monitoring System for Exhaust Emission Units
T/CASTENG 014-2023 Specification for carbon emission accounting of plastic product enterprises
T/ACEF 002-2020 Technical specification for on-line monitoring of odor emitted from stationary sources
T/SDEPI 024-2022 Technical Guidelines for the Construction of Power Consumption Monitoring System for Exhaust Gas Emission Units
T/ZGZS 0802-2022 Calculation of Carbon Emissions from Physical Recycling of Recycled Plastics
T/CAEPI 46-2022 Specifications for monitoring point setting of stationary source emission point
T/CAEPI 35-2021 Technical Guidelines for Data Acquisition Monitoring of Exhaust Gas Emission Process (Working Condition) in Catering Industry
T/GDC 143-2022 Fugitive emissions—Determination of volatile organic compounds metal oxide method
T/SDAS 209-2020 Technical specifications for waste gas emission during the fermentation process of harmless treatment of breeding manure
T/ACRI 0006-2018 Emission standard of air pollutants for refractory industry

CZ-CSN, plastic waste emissions

CSN IEC 761-3:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 3: Specific requirements for noble gas effluent monitors
CSN IEC 761-2:1992 Equipment for continuously monitoring radioactivity in gaseous effluents Part 2: Specific requirements for aerosol effluent monitors
CSN IEC 761-1:1992 Equipment for continuously monitoring radioactivity in gaseous effluents Part 1: General requirements
CSN IEC 761-6:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 6: Specific requirements for transuranic aerosol effluent monitors
CSN IEC 761-5:1993 Equipment for continuously monitoring radioactivity in gaseous effluents Part 5: Specific requirements for tritium effluent monitors
CSN IEC 761-4:1993 Equipment for continuously monitoring radioactivity in gaseous effluents. Part 4: Sepcific requirements for iodine monitors

GOSTR, plastic waste emissions

GOST R ISO 8178-5-2017 Reciprocating internal combustion engines. Exhaust emission measurement. Part 5. Test fuels
GOST 34471.6-2018 Reciprocating internal combustion engines. Exhaust emission measurement. Part 6. Report of measuring results and test
GOST 24585-1981 Marine, locomotive and commercial diesels. Emission of harmful substances with exhaust gases. Permissible values and measurement methods

American Society of Mechanical Engineers (ASME), plastic waste emissions

ASME B133.9-1994 Measurement of exhaust emissions from stationary gas turbine engines
ASME B133.9-1994(R2001) Measurement of Exhaust Emissions from Stationary Gas Turbine Engines

VN-TCVN, plastic waste emissions

TCVN 6438-2005 Road vehicles.Maximum permitted emission limits of exhaust gases
TCVN 6503-1-1999 Gas turbines.Exhaust gas emission.Part 1: Measurement and evaluation
TCVN 6440-1-2009 Motorcycles.Measurement method for gaseous exhaust emissions and fuel consumption.Part 1: General test requirements
TCVN 6440-3-2009 Motorcycles.Measurement method for gaseous exhaust emissions and fuel consumption.Part 3: Fuel consumption measurement at a constant speed
TCVN 6204-2008 Road vehicles.Measurement methods for exhaust gas emissions during inspection or maintenance
TCVN 6440-2-2009 Motorcycles.Measurement method for gaseous exhaust emissions and fuel consumption.Part 2: Test cycles and specific test conditions

IX-UIC, plastic waste emissions

UIC O 624-2012 Exhaust emission tests for diesel traction engines

US-CFR-file, plastic waste emissions

CFR 14-34.23-2013 Aeronautics and Space. Part34:Fuel venting and exhaust emission requirements for turbine engine powered airplanes. Section34.23:Exhaust emission standards for engines manufactured on and after july 18, 2012.

Professional Standard - Machinery, plastic waste emissions

JB/T 5417-2007 Plastics vented extruder
JB/T 5417-1991 Plastic venting extruder

Shanghai Provincial Standard of the People's Republic of China, plastic waste emissions

DB31/ 767-2013 Air Pollutant Emission Standards for Hazardous Waste Incineration

Beijing Provincial Standard of the People's Republic of China, plastic waste emissions

DB11/ 503-2007 Air Pollutant Emission Standards for Hazardous Waste Incineration

ZA-SANS, plastic waste emissions

SANS 8770:2008 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polyethylene (PE)
SANS 7675:2004 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Chlorinated poly(vinyl chloride) (PVC-C)
SANS 7682:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS)

European Committee for Standardization (CEN), plastic waste emissions

PD CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
prEN 23994-1992 Plastic products; hose of polymer reinforced thermoplastics for suction and discharge (ISO 3994:1977)
CEN/TR 13801:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
EN ISO 13255:2017 Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for airtightness of joints
EN 16429:2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
DD ENV 1401-2-2000 Plastics Piping Systems for Non-Pressure Underground Drainage and Sewerage - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 2: Guidance for Assessment of Conformity
EN ISO 3994:2000 Plastics Hoses - Helical-Thermoplastic-Reinforced Thermoplastics Hoses for Suction and Discharge of Aqueous Materials - Specification
EN 1054:1995 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints
CEN EN 15012-2007 Plastics piping systems — Soil and waste discharge systems within the building structure — Performance characteristics for pipes, fittings and their joints
EN 15012:2007 Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints
EN 1329-1:1999 Plastics Piping Systems for Soil and Waste Discharge (Low and High Temperature) within the Building Structure - Unplasticized Poly(Vinyl Chloride) (PVC-U) - Part 1: Specifications for Pipes, Fittings and the System
EN 1329-1:2014 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
EN 1329-1:2020 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
PD CEN/TS 1329-2:2018 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
PD CEN/TS 1329-2:2021 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
DD ENV 1453-2-2000 Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity

Hebei Provincial Standard of the People's Republic of China, plastic waste emissions

DB13/T 2583-2017 Test method for exhaust gas emission from civil clean combustion stoves

Association of German Mechanical Engineers, plastic waste emissions

VDI 3481 Blatt 2-1998 Gaseous emission measurement - Determination of gaseous organic carbon in waste gases - Adsorption on silica gel
VDI 3862 Blatt 8-2015 Measurement of gaseous emissions - Measurement of formaldehyde in the exhaust gas of combustion engines - FTIR method
VDI 2462 Blatt 2-2011 Measurement of gaseous emissions - Determination of sulphur trioxide in water vapour containing exhaust gas - Condensation method
VDI 3861 Blatt 2-2008 Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method

AT-ON, plastic waste emissions

OENORM EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere

CH-SNV, plastic waste emissions

SN EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere

IT-UNI, plastic waste emissions

UNI EN 16429-2021 Stationary source emissions - Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere
UNI CEN/TS 1329-2-2021 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity

NZ-SNZ, plastic waste emissions

AS/NZS 4401:2006 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings-Polyethylene (PE)

U.S. Environmental Protection Agency (U.S. EPA), plastic waste emissions

EPA 40 CFR PART 600-2010 FUEL ECONOMY AND CARBON-RELATED EXHAUST EMISSIONS OF MOTOR VEHICLES

Henan Provincial Standard of the People's Republic of China, plastic waste emissions

DB41/T 2199-2021 Technical specifications for continuous monitoring of ammonia emissions from stationary pollution sources
DB41/ 2166-2021 Emission standard of air pollutants for refractory industry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plastic waste emissions

GB 17691-2001 Limits and measurement methods for exhaust pollutants from compression ignition(C.I.) engines of vehicles
GB 14569.2-1993 Characteristic requirements for solidified waste of low and intermediate level radioactive waste. Plastic solidified waste
GB 3847-2005 Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equiped with C.I.E.
GB 20891-2007 Limits and measurement methods for exhaust pollutants from diesel engines of non-road mobile machinery (Ⅰ、Ⅱ)
GB 18285-2005 Limits and measurement methods for exhaust pollutants from vehicles equipped ignition engine under two-speed idle conditions and simple driving mode conditions

PL-PKN, plastic waste emissions

PN-EN 16429-2021-08 E Stationary source emissions -- Reference method for the determination of the concentration of gaseous hydrogen chloride (HCl) in waste gases emitted by industrial installations into the atmosphere

Zhejiang Provincial Standard of the People's Republic of China, plastic waste emissions

DB33/T 2167-2018 Technical specification for low-concentration emission monitoring of waste gas from stationary pollution sources in coal-fired power plants

TH-TISI, plastic waste emissions

TIS 1410-1997 Unplasticized polyvinyl chloride pipe fittings for soil, waste and vent (swv) applications
TIS 1727-1998 Road vehicles.measurement methods for exhaust gas emissions during inspection or maintenace

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, plastic waste emissions

GB/T 34593-2017 Test methods of hydrogen emission for fuel cell engine

Shanxi Provincial Standard of the People's Republic of China, plastic waste emissions

DB14/ 2800-2023 Air pollutant emission standards for the refractory industry

HU-MSZT, plastic waste emissions

MSZ 21869/3-1981

National Aeronautics and Space Administration (NASA), plastic waste emissions

NASA-STD-(I)-6001 REV A-2008 FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES (NASA Interim Standard)

Jiangxi Provincial Standard of the People's Republic of China, plastic waste emissions

DB36/ 1101.4-2019 Volatile Organic Compound Emission Standard Part 4: Plastic Products Industry

国家市场监督管理总局、中国国家标准化管理委员会, plastic waste emissions

GB/T 39382-2020 Thermoplastics piping systems for soil and waste discharge inside buildings—Test method for airtightness of joints
GB/T 37154-2018 Fuel cell electric vehicles—Test methods of hydrogen emission

AIA/NAS - Aerospace Industries Association of America Inc., plastic waste emissions

NAS275-1947 Plug & Bleeder - Screw Thread Plastic (Rev 2)

Liaoning Provincial Standard of the People's Republic of China, plastic waste emissions

DB21/T 3793-2023 Technical Specifications for Low Concentration Emission Monitoring of Stationary Pollution Source Exhaust Gas from Coal-fired Power Plants in Liaoning Province
DB21/ 3011-2018 Emission standard of air pollutants for magnesia refractory industry

CEN - European Committee for Standardization, plastic waste emissions

PD CEN/TS 1329-2:2012 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity

Tianjin Provincial Standard of the People's Republic of China, plastic waste emissions

DB12/ 765-2016 Air Pollutant Emission Standards for Biomass Formed Fuel Boilers
DB12/ 765-2018 Air Pollutant Emission Standards for Biomass Formed Fuel Boilers

Jilin Provincial Standard of the People's Republic of China, plastic waste emissions

DB22/T 2581-2016 Air Pollutant Emission Standards for Biomass Formed Fuel Boilers