ZH
RU
ES

Film inside and outside

Film inside and outside, Total:353 items.

In the international standard classification, Film inside and outside involves: Solar energy engineering, Products of the chemical industry, Wood-based panels, Rubber and plastics products, Dentistry, Photography, Organic chemicals, Refractories, Plastics, Piezoelectric and dielectric devices, Construction of waterways and ports, Road engineering, Farm buildings, structures and installations, Testing of metals, Products of non-ferrous metals, Surface treatment and coating, Conducting materials, Glass, Electrical wires and cables, Rubber, Machine tools, Paints and varnishes, Construction materials, Protection of and in buildings, Analytical chemistry, Ceramics, Bearings, Floor treatment appliances, Iron and steel products, Elements of buildings, CONSTRUCTION MATERIALS AND BUILDING, Linear and angular measurements, Company organization and management, Adhesives, Structures of buildings, Resistors, Farming and forestry, Integrated circuits. Microelectronics, Terminology (principles and coordination), Sports equipment and facilities, Electromechanical components for electronic and telecommunications equipment, Geology. Meteorology. Hydrology, Coatings and related processes used in aerospace industry, Fasteners for aerospace construction, Components for aerospace construction, Medical equipment, Fasteners, Ground service and maintenance equipment, Pipeline components and pipelines, Welding, brazing and soldering, Soil quality. Pedology, Fruits. Vegetables, Electricity. Magnetism. Electrical and magnetic measurements.


GM Daewoo, Film inside and outside

Japanese Industrial Standards Committee (JISC), Film inside and outside

  • JIS C 2261:1986 Mica with films on one side (sheets and tapes)
  • JIS C 2260:1986 Mica with films on both sides (sheets and tapes)
  • JIS K 6766:1977 Testing methods for polyethylene coatings on metals
  • JIS R 1636:1998 Test method for thickness of fine ceramic thin films -- Film thickness by contact probe profilometer
  • JIS R 1683:2007 Test method for surface roughness of ceramic thin films by atomic force microscopy
  • JIS R 1683:2014 Test method for surface roughness of ceramic thin films by atomic force microscopy

International Federation of Trucks and Engines, Film inside and outside

U.S. Military Regulations and Norms, Film inside and outside

  • ARMY UFGS-07 55 00-2009 PROTECTED MEMBRANE ROOFING (PMR)
  • ARMY QPL-22332-6 NOTICE 1-2008 Paint, Priming, Exterior and Interior (For Ammunition)
  • ARMY MIL-PRF-914 C (1)-2008 RESISTOR NETWORKS, FIXED, FILM, SURFACE MOUNT, NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
  • ARMY QPL-914-QPD-2010 Resistor Networks, Fixed, Film, Surface Mount, Nonestablished Reliability, and Established Reliability, General Specificaiton for
  • ARMY QPL-914-2011 Resistor Networks, Fixed, Film, Surface Mount, Nonestablished Reliability, and Established Reliability, General Specification for
  • ARMY QPL-914-2012 Resistor Networks, Fixed, Film, Surface Mount, Nonestablished Reliability, and Established Reliability, General Specification for

Indonesia Standards, Film inside and outside

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Film inside and outside

  • GB/T 15870-1995 Chrome thin films for hard surface photomasks
  • GB 13735-1992 Polyethylene blown mulch film for agricultural uses
  • GB/T 22586-2008 Measurements of surface resistance of high temperature superconductor thin films at microwave frequencies
  • GB/T 31729-2015 Test method for mass per unit area of plastic film
  • GB/T 18911-2002 Thin-film terrestrial photovoltaic(PV) modules--Design qualification and type approval
  • GB/T 31227-2014 Test method for the surface roughness by atomic force microscope for sputtered thin films
  • GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)

Group Standards of the People's Republic of China, Film inside and outside

  • T/QGCML 237-2021 Peppermint Chamomile Soothing Mask
  • T/CECA 69-2022 Single-crystal thin film substrates for SAW devices
  • T/SFAEA 010003-2019 VSWQ124 series roof fully open plastic film greenhouse
  • T/SZBX 054-2021 Polyimide-fluorine 46 composite film sintering and single-sided film reinforced mica tape wrapped copper flat wire
  • T/CPIA 0036.1-2022 Retroreflective optical films for photovoltaic modules Part 1: Films for tinned ribbon surfaces
  • T/CNFPIA 3018-2021 Composite plywood of surface decorated extremely thin fiberboard with paper impregnated thermosetting resi
  • T/CEC 728-2022 Operation and maintenance rules for household wall thin-film photovoltaic power generation system
  • T/CEC 5081-2022 Specifications for installation and commissioning of household wall thin film photovoltaic power generation systems
  • T/CSTM 00852-2023 General evaluation technology system of biodegradable agricultural mulching films
  • T/BBSCA 006-2019 Specification for high-altitude cleaning service for interior and exterior facades of buildings
  • T/CAB 0118.4-2021 Polyethylene (PE) ecologically degradable plastic —Part 4:Mulch film for agricultural uses
  • T/CABEE 006-2021 Technical specification for engineering of external thermal insulation of mortar-coating faced EPS panel with fire separation slats
  • T/ZHCA 013-2021 Method of eye irritation test in vitro for facial cleanser cosmetic products - In vitro eye irritation test with reconstructed human cornea-like epithelial model

BE-NBN, Film inside and outside

AR-IRAM, Film inside and outside

ES-AENOR, Film inside and outside

Professional Standard - Forestry, Film inside and outside

国家林业和草原局, Film inside and outside

American National Standards Institute （ANSI), Film inside and outside

  • ANSI/ASTM D2457:1997 Test Method for Specular Gloss of Plastic Film and Sheeting
  • ANSI A108.16-2005 Installation of Paper-Faced, Back-Mounted, Edge-Mounted, or Clear Film Face-Mounted Glass Mosaic Tile
  • ANSI/UL 61646-2012 Standard for Thin-Film Terrestrial Photovoltaic (PV) Modules - Design Qualification and Type Approval
  • ANSI/ABMA 15-1991 Ball Bearings with Spherical Outside Surfaces and Extended Inner Ring Width (Includes Eccentric Locking Collars)
  • ANSI/AWWA D104-2011 Automatically Controlled, Impressed-Current Cathodic Protection for the Interior Submerged Surfaces of Steel Water Storage Tanks

British Standards Institution (BSI), Film inside and outside

  • BS EN ISO 22803:2006 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
  • BS ISO 8296:2003 Plastics - Film and sheeting - Determination of wetting tension
  • BS ISO 13424:2013 Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of results of thin-film analysis
  • BS 8747:2007 Reinforced bitumen membranes (RBMs) for roofing - Guide to selection and specification
  • BS EN ISO 22803:2005 Dentistry. Membrane materials for guided tissue regeneration in oral and maxillofacial surgery. Contents of a technical file
  • BS EN 61646:2008 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
  • BS EN 61646:1997 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
  • BS EN 61646:2009 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
  • BS EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
  • BS EN 15836-1:2010 Plastics.Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools. Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
  • 19/30386035 DC BS EN IEC 60794-6. Optical Fibre Cables. Part 6. Indoor-Outdoor cables. Sectional specification for Indoor-Outdoor cables
  • BS EN 15286:2013 Agglomerated stone. Slabs and tiles for wall finishes (internal and external)
  • BS EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
  • BS EN 15285:2008 Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
  • BS 5385-3:2007 Wall and floor tiling – Part 3: Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions – Code of practice
  • BS 5385-3:2014 Wall and floor tiling. Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice
  • PD ISO/TS 25138:2019 Tracked Changes. Surface chemical analysis. Analysis of metal oxide films by glow-discharge optical-emission spectrometry
  • BS EN 15042-1:2006 Thickness measurement of coatings and characterization of surfaces with surface waves - Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
  • BS EN 61788-17:2013 Superconductivity. Electronic characteristic measurements. Local critical current density and its distribution in large-area superconducting films
  • BS EN IEC 61788-17:2021 Tracked Changes. Superconductivity. Electronic characteristic measurements. Local critical current density and its distribution in large-area superconducting films

American Society for Testing and Materials (ASTM), Film inside and outside

  • ASTM E2244-05 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
  • ASTM E2244-11 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
  • ASTM E2244-11(2018) Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
  • ASTM D3633-98 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
  • ASTM D3633-98(2006) Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
  • ASTM F22-02 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
  • ASTM F22-02(2007) Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
  • ASTM F22-13 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
  • ASTM D3633/D3633M-12 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
  • ASTM D4073-06 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
  • ASTM D3207-92(2002) Standard Test Method for Detergent Resistance of Floor Polish Films
  • ASTM F21-65(2007) Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
  • ASTM D3617-83(1994)e1 Standard Practice for Sampling and Analysis of New Built-Up Roof Membranes
  • ASTM D3617-02 Standard Practice for Sampling and Analysis of New Built-Up Roof Membranes
  • ASTM D4073-94(2003) Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
  • ASTM D3207-92(2008) Standard Test Method for Detergent Resistance of Floor Polish Films
  • ASTM D4073-94(1998)e1 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
  • ASTM D4073/D4073M-06(2019)e1 Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
  • ASTM D4073-06(2013) Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes
  • ASTM B825-19 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
  • ASTM D3207-92(2016) Standard Test Method for Detergent Resistance of Floor Polish Films
  • ASTM D5635-04a Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
  • ASTM D5602-98 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
  • ASTM D5602-98(2006) Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
  • ASTM D5635-98 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
  • ASTM D2457-97 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
  • ASTM D5635/D5635M-11 Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
  • ASTM D5602/D5602M-11 Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
  • ASTM D2457-08 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
  • ASTM D2457-08e1 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
  • ASTM D2457-13 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
  • ASTM D7105-06(2013) Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
  • ASTM D2457-21 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
  • ASTM D2457-03 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
  • ASTM E455-98 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
  • ASTM D5295-00 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
  • ASTM F21-14 Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
  • ASTM D5295/D5295M-14 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
  • ASTM B825-97 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
  • ASTM F22-21 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
  • ASTM E2244-02 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
  • ASTM E907-96 Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
  • ASTM F1843-15 Standard Practice for Sample Preparation of Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements
  • ASTM B825-02 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
  • ASTM B825-02(2008) Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
  • ASTM E2244-11e1 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
  • ASTM B825-13 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
  • ASTM F2359-04 Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source
  • ASTM F2360-04 Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source
  • ASTM F1995-12 Standard Test Method for Determining the Shear Force of a Surface Mount Device (SMD) in a Membrane Switch
  • ASTM E455-04 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
  • ASTM D5405-98(2004) Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
  • ASTM D7093-04 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
  • ASTM D5405-98 Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
  • ASTM C1471-00 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
  • ASTM D5405/D5405M-98(2011)e1 Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
  • ASTM D7352-07(2012) Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)
  • ASTM F1995-00(2005) Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch
  • ASTM F1995-00 Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch
  • ASTM C957/C957M-10 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
  • ASTM F1995-13 Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch
  • ASTM D7832/D7832M-14(2021) Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces)
  • ASTM C957-05 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
  • ASTM C957-05a Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
  • ASTM C957-06 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
  • ASTM C1471-05 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Film inside and outside

  • GB/T 33051-2016 Optical functional films—Superficial hardening film—Determination of thickness of hardening coating
  • GB/T 35795-2017 Biodegradable mulching film for agricultural uses
  • GB 13735-2017 Polyethylene blown mulch film for agricultural uses
  • GB/T 33398-2016 Optical functional films—Polyethylene terephthalate(PET) film—Determination of surface resistance

Korean Agency for Technology and Standards (KATS), Film inside and outside

  • KS M ISO 8296:2012 Plastics-Film and sheeting-Determination of wetting tension
  • KS P ISO 22803:2013 Dentistry-Membrane materials for guided tissue regeneration in oral and maxillofacial surgery-Contents of a technical file
  • KS C 6111-4-2007 Homogeneity in the surface resistance of large high-Tc superconductor films at microwave frequencies
  • KS F 2622-2018 Standard test method for performance evaluation of membrane roofing systems
  • KS C IEC 61646-2010(2020) Thin-film terrestrial photovoltaic(PV) modules－Design qualification and type approval
  • KS C IEC 61646:2010 Thin-film terrestrial photovoltaic(PV) modules-Design qualification and type approval
  • KS P ISO 22803:2019 Dentistry ― Membrane materials for guided tissue regeneration in oral and maxillofacial surgery ― Contents of a technical file
  • KS C 6111-4-2007(2022) Homogeneity in the surface resistance of large high-Tc superconductor films at microwave frequencies
  • KS C 6111-3-2007(2017) Electronic characteristic measurements－Intrinsic surface impedance of high-TC superconductor films at microwave frequencies
  • KS P ISO 5837-1-2010(2016) Implants for surgery－Intramedullary nailing systems－Part 1：Intramedullary nails with cloverleaf or V-shaped cross-section
  • KS D ISO 13663:2002 Welded steel tubes for pressure purposes-Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
  • KS C 6111-3-2007 Electronic characteristic measurements－Intrinsic surface impedance of high-TC superconductor films at microwave frequencies
  • KS P ISO 5837-1:2021 Implants for surgery — Intramedullary nailing systems — Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section

International Organization for Standardization (ISO), Film inside and outside

  • ISO 8296:2003 Plastics - Film and sheeting - Determination of wetting tension
  • ISO 8296:1987 Plastics; Film and sheeting; Determination of wetting tension
  • ISO 22803:2004 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
  • ISO 8296:1987/Cor 1:1998 Plastics - Film and sheeting - Determination of wetting tension; Technical Corrigendum 1
  • ISO 2264:1972 Rolling bearings — Bearings with spherical outside surface and extended inner ring width
  • ISO 13424:2013 Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of results of thin-film analysis
  • ISO 23170:2022 Surface chemical analysis — Depth profiling — Non-destructive depth profiling of nanoscale heavy metal oxide thin films on Si substrates with medium energy ion scattering
  • ISO 2428:1974 Plywood; Veneer plywood with rotary cut veneer for general use; Classification by appearance of panels with outer veneers of birch
  • ISO 2427:1974 Plywood; Veneer plywood with rotary cut veneer for general use; Classification by appearance of panels with outer veneers of beech
  • ISO 2430:1974 Plywood; Veneer plywood with rotary cut veneer for general use; Classification by appearance of panels with outer veneers of poplar
  • ISO 3228:1977 Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Cast and pressed housings
  • ISO/TS 25138:2010 Surface chemical analysis - Analysis of metal oxide films by glow-discharge optical-emission spectrometry
  • ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
  • ISO 2429:1974 Plywood; Veneer plywood with rotary cut veneer for general use; Classification by appearance of panels with outer veneers of broadleaved species of tropical Africa
  • ISO 3145:1974 Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Eccentric locking collars
  • ISO 5841-3:1992 Cardiac pacemakers; part 3: low-profile connectors (IS-1) for implantable pacemakers

German Institute for Standardization, Film inside and outside

  • DIN ISO 8296:2006 Plastics - Film and sheeting - Determination of wetting tension (ISO 8296:2003)
  • DIN ISO 8296:2008 Plastics - Film and sheeting - Determination of wetting tension (ISO 8296:2003);English version of DIN ISO 8296:2008-03
  • DIN EN ISO 22803:2006 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004); English version of DIN EN ISO 22803:2006
  • DIN EN 61646:2009 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval (IEC 61646:2008); German version EN 61646:2008
  • DIN EN ISO 22803:2006-01 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004); German version EN ISO 22803:2005
  • DIN EN 140401:2009-12 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors; German version EN 140401:2009 / Note: DIN EN 140401 (2002-12) remains valid alongside this standard until 2012-03-01.
  • DIN EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements; English version of DIN EN 14782:2006-03
  • DIN EN 15285:2008 Agglomerated stone - Modular tiles for flooring and stairs (internal and external); German version EN 15285:2008
  • DIN EN 15286:2013-09 Agglomerated stone - Slabs and tiles for wall finishes (internal and external); German version EN 15286:2013
  • DIN EN 15042-1:2006-06 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves; German version EN 15042-1:2006
  • DIN EN 15836-2:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm; German version EN 15836-2:2010
  • DIN EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm; German version EN 15836-1:2010
  • DIN EN 16240:2014 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods; German version EN 16240:2013
  • DIN EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods; German version EN 16153:2013

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Film inside and outside

  • IPC TM-650 2.4.41.3-1995 In-Plane Coefficient of Thermal Expansion, Organic Films
  • IPC 4203-2002 Adhesive Coated Dielectric Films for Use as Cover Sheets for Flexible Printed Circuitry and Flexible Adhesive Bonding Films [Superseded: IPC FC-232 ADDENDUM, IPC FC-233A]

Association Francaise de Normalisation, Film inside and outside

  • NF EN ISO 22803:2006 Art dentaire - Membranes pour régénération de tissus en chirurgie buccale et maxillo-faciale - Contenu du dossier technique
  • NF S91-164*NF EN ISO 22803:2006 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
  • NF C57-109:2005 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval.
  • NF EN 15286:2013 Pierres agglomérées - Carreaux et plaques pour finitions murales (intérieures et extérieures)
  • NF C57-109*NF EN 61646:2008 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
  • NF P34-330*NF EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
  • NF C96-500-2*NF EN 165000-2:1996 Film and hybrid integrated circuits - Part 2 : internal visual inspection and special tests
  • NF C83-241*NF EN 140401:2009 Blank Detail Specification : fixed low power film surface mount (SMD) resistors
  • NF EN 15042-1:2006 Mesure de l'épaisseur des revêtements et caractérisation des surfaces à l'aide d'ondes de surface - Partie 1 : guide pour la détermination des constantes élastiques, de la masse volumique et de l'épaisseur des films à l'aide d'ondes de su...
  • NF B10-604*NF EN 15286:2013 Agglomerated stone - Slabs and tiles for wall finishes (internal and external)
  • NF P38-508:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
  • NF P38-508*NF EN 16153+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
  • NF P38-508/IN1*NF EN 16153/IN1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
  • NF B10-603*NF EN 15285:2008 Agglomerated stone - Modular tiles for flooring and stairs (internal and external)
  • NF P98-284-1:1992 Tests relating to pavements. Waterproofing materials for structures. Determination of cracking stregth. Part 1 : tests on adhesive thin film.
  • NF C31-888-15*NF EN 61788-15:2012 Superconductivity - Part 15 : electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
  • NF EN 61788-15:2012 Supraconductivité - Partie 15 : mesures de caractéristiques électroniques - Impédance de surface intrinsèque de films supraconducteurs aux fréquences micro-ondes
  • NF S90-420*NF ISO 5837-1:1986 Medico-surgical equipment. Implants for surgery. Intramedullary nailing systems. Part 1 : intramedullary nails with cloverleaf or V-shaped cross-section.
  • NF C83-241-804*NF EN 140401-804:2011 Detail Specification : fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1-0,25.

AENOR, Film inside and outside

  • UNE 55708:1984 SURFACE ACTIVE AGENTS. DETERMINATION OF INTERFACIAL TENSION BY DRAWING UP LIQUID FILMS
  • UNE 55501:1990 SURFACE ACTIVE AGENTS. DETERMINATION OF SURFACE TENSION BY DRAWING UP LIQUID FILMS.
  • UNE-EN 15286:2013 Agglomerated stone - Slabs and tiles for wall finishes (internal and external)
  • UNE-EN 61646:2009 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
  • UNE-EN ISO 22803:2006 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004)
  • UNE-EN 15042-1:2007 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
  • UNE 55708/1C:1989 SURFACE ACTIVE AGENTS. DETERMINATION OF INTERFACIAL TENSION BY DRAWING UP LIQUID FILMS. ILLUSTRATED DESCRIPTION OF ITS DEVELOPMENT USING THE RING MEASUREMENT METHOD.

Gansu Provincial Standard of the People's Republic of China, Film inside and outside

Qinghai Provincial Standard of the People's Republic of China, Film inside and outside

Xinjiang Provincial Standard of the People's Republic of China, Film inside and outside

IPC - Association Connecting Electronics Industries, Film inside and outside

US-FCR, Film inside and outside

ECIA - Electronic Components Industry Association, Film inside and outside

  • IS-34-1987 Leaded Surface Mount Resistor Networks Fixed Film

European Committee for Standardization (CEN), Film inside and outside

  • EN ISO 22803:2005 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
  • EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
  • EN 15286:2013 Agglomerated stone - Slabs and tiles for wall finishes (internal and external)
  • EN 16153:2013 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods (Incorporates Amendment A1: 2015)
  • EN 16153:2013+A1:2015 Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods

Professional Standard - Non-ferrous Metal, Film inside and outside

  • YS/T 718-2009 Flat magneting sputtering target.Niobium target for optical coating
  • YS/T 719-2009 Flat magneting sputtering target.Silicon target for optical coating

Professional Standard - Chemical Industry, Film inside and outside

  • HG/T 4303-2012 Test method of resistance to abrasion for hard-coating polyester film
  • HG/T 2348-1992 The stylus method for measuring surface roughness of polyester film for magnetic tape
  • HG/T 4949~4950-2016 Matte polyethylene terephthalate (PET) hardened films for in-mold decoration (IMD) for clear optics and indium tin oxide (ITO) coatings (2016)

(U.S.) Ford Automotive Standards, Film inside and outside

  • FORD WSS-M99P37-A-2014 PERFORMANCE,LAMINATED IN-COLOR FILM MATERIALS, CLASS "A" SURFACE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99P37-B-2014 PERFORMANCE,LAMINATED IN-COLOR FILM MATERIALS, CLASS "A" SURFACE, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4G355-A1-1994 SEALER, TAPE FORM, EPDM BASE (TACKY SIDE) AND EVA FILM (NON-TACKY SIDE), HEAT
  • FORD WSF-M3G215-A-2006 TAPE, TWO SIDED PRESSURE SENSITIVE ADHESIVE FILM, THERMALLY CONDUCTIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M5P10-A-1990 METALLIZE, PLASTIC PARTS, FIRST SURFACE, INTERIOR OR EXTERIOR

European Committee for Electrotechnical Standardization（CENELEC）, Film inside and outside

  • EN 61646:2008 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
  • EN 140401:2009 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors

International Electrotechnical Commission (IEC), Film inside and outside

  • IEC 61646:2008 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
  • IEC 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies

GM Europe, Film inside and outside

RU-GOST R, Film inside and outside

  • GOST 260-1975 Rubber. Method for determination of resilience of the lacquer film on rubber surface
  • GOST 25209-1982 Plastics and polymer films. Methods for the determination of surface charges of electrets
  • GOST R IEC 61646-2013 Thin-film terrestrial photovoltaic modules. Procedure of tests for the prove of conformity of functional characteristics
  • GOST 8756.18-2017 Canned foods. Methods for determination of appearance, tightness of package and inner surface condition of package

国家市场监督管理总局、中国国家标准化管理委员会, Film inside and outside

  • GB/T 40279-2021 Test method for thickness of films on silicon wafer surface—Optical reflection method
  • GB/T 36401-2018 Surface chemical analysis—X-ray photoelectron spectroscopy—Reporting of results of thin-film analysis

YU-JUS, Film inside and outside

  • JUS G.S2.740-1996 Plastics - Optical properties of thermoplastic films - Determination of specular gloss of plastic films
  • JUS N.A8.230-1990 Plastic films for electrical purposes. Definitions and general requirements

Professional Standard - Machinery, Film inside and outside

  • JB/T 8078-1999 Grinders for internal surface of outer ring of bearings parameters
  • JB/T 8079-1999 Grinder for outer surface of inner rings of bearings parameters
  • JB/T 8079.1-1999 Bearing inner ring outer surface grinding machine parameters

工业和信息化部, Film inside and outside

  • HG/T 6003-2022 Water-based coatings for external surfaces of internal combustion engines
  • HG/T 4950-2016 Matte polyethylene terephthalate (PET) hardened film for indium tin oxide (ITO) coating

Defense Logistics Agency, Film inside and outside

KR-KS, Film inside and outside

  • KS F 2622-2018(2023) Standard test method for performance evaluation of membrane roofing systems
  • KS P ISO 22803-2019 Dentistry ― Membrane materials for guided tissue regeneration in oral and maxillofacial surgery ― Contents of a technical file
  • KS P ISO 5837-1-2021 Implants for surgery — Intramedullary nailing systems — Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section

HU-MSZT, Film inside and outside

Professional Standard - Medicine, Film inside and outside

  • YY/T 0526-2009 Dentistry Membrane materials for guided tissue regeneration in oral and maxillofacial surgery Contents of a technical file
  • YY/T 0019.1-2011 Implants for surgery.Intramedullary nailing systems.Part 1:Intramedullary nails with cloverleaf or V-shaped cross-section

Danish Standards Foundation, Film inside and outside

  • DS/EN 15286:2013 Agglomerated stone - Slabs and tiles for wall finishes (internal and external)
  • DS/EN 61646:2008 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval
  • DS/EN ISO 22803:2005 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file
  • DS/EN 140401:2009 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors
  • DS/EN 165000-2:1997 Film and hybrid integrated circuits - Part 2: Internal visual inspection and special tests
  • DS/EN 15042-1:2006 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves
  • DS/EN 61788-15:2012 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies

未注明发布机构, Film inside and outside

  • BS EN 61646:2008(2009) Thin - film terrestrial photovoltaic (PV) modules — Design qualification and type approval
  • DIN EN ISO 527-3 Berichtigung 1:1998 Plastics – Determination of tensile properties – Part 3: Test conditions for films and panels
  • DIN EN ISO 527-3:1995 Plastics – Determination of tensile properties DIN Part 3: Test conditions for films and panels
  • BS EN 61788-15:2011(2012) Superconductivity Part 15 : Electronic characteristic measurements – Intrinsic surface impedance of superconductor films at microwave frequencies

CEN - European Committee for Standardization, Film inside and outside

  • EN 14783:2006 Fully supported metal sheet and strip for roofing@ external cladding and internal lining - Product specification and requirements

Standard Association of Australia （SAA）, Film inside and outside

TH-TISI, Film inside and outside

  • TIS 2210-2012 Thin.film terrestrial photovoltaic (pv) modules.design qualification and type approval

European Association of Aerospace Industries, Film inside and outside

  • AECMA PREN 6085-1999 Aerospace Series Non-Metallic Materials Epoxy Surfacing Films Edition P1
  • AECMA PREN 6084-1999 Aerospace Series Non-Metallic Materials Surfacing Films Technical Specification General Requirements Edition P1

RO-ASRO, Film inside and outside

  • STAS 10157-1975 PAINTS AND VARNISHES Determination of film gloss by measuring specular reflexion
  • STAS 10465/1-1976 Housing for rolling bearings CAST HOUSING FOR BEARINGS WITH SPHERICAL OUTSIDE SURFACE AND EXTENDED INNER RING WIDTH Boundary dimensions
  • STAS 1373/2-1973 VERNIER CALIPERS WITH INTERNAL AND EXTERNAL MEASURING FACES Dimensions

VDI - Verein Deutscher Ingenieure, Film inside and outside

  • VDI 2534 Blatt 1-1966 Oberflaechenschutz mit organischen Werkstoffen; Oberflaechenueberzuege mit Folien aus PVC hart (Polyvinylchlorid hart)

PT-IPQ, Film inside and outside

  • NP EN 1850-1-2001 Flexible sheets for waterproofing Determination of visible defescts Part 1:Bitumen sheets for roof waterproofing

Lithuanian Standards Office , Film inside and outside

  • LST EN 140401-2009 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors
  • LST EN 61646-2008 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval (IEC 61646:2008)
  • LST EN 165000-2-2001 Film and hybrid integrated circuits. Part 2: Internal visual inspection and special tests
  • LST EN ISO 22803:2006 Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004)
  • LST EN 15042-1-2006 Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1: Guide to the determination of elastic constants, density and thickness of films by laser induced surface acoustic waves

Canadian Standards Association (CSA), Film inside and outside

  • CAN/CSA-IEC 61646:2010 Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval (First Edition)
  • CAN/CSA-A123.21-2014 Standard test method for the dynamic wind uplift resistance of membraneroofing systems (Third Edition; Update No. 1: May 2015)

Guizhou Provincial Standard of the People's Republic of China, Film inside and outside

  • DB52/T 1729-2023 Evaluation of Planting Effect of Fully Biodegradable Agricultural Ground Cover Film Tobacco
  • DB52/T 1676-2022 Regulations for the use of fully biodegradable agricultural ground covering film for tobacco planting

ES-UNE, Film inside and outside

  • UNE-EN 140401:2009 Blank Detail Specification: Fixed low power film surface mount (SMD) resistors (Endorsed by AENOR in July of 2009.)
  • SAE AS3505C-2023 INSERT - THIN WALL, LONG, SELF-LOCKING, 1025 °F, SILVER PLATED ON INTERNAL SURFACES ONLY, UNS N07718, UNJ THREAD
  • SAE AS3504C-2023 INSERT - THIN WALL, SHORT, SELF-LOCKING, 1025 °F, SILVER PLATED ON INTERNAL SURFACES ONLY, UNS N07718, UNJ THREAD
  • UNE-EN 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies (Endorsed by AENOR in March of 2012.)

Canadian General Standards Board （CGSB), Film inside and outside

  • CGSB 62-GP-6M-1982 Standard for Prefabricated Transparent-Base Markings, General- Purpose, for Use on Exterior and Interior Surfaces
  • CGSB 62-GP-7M-1982 Standard for Prefabricated"Mirrorized" Markings, General Purpose, for Use on Exterior and Interior Surfaces
  • CGSB 62-GP-2B AMD 2-1970 Decalcomanias: General Purpose, for Use on Exterior and Interior Surfaces, Specification for
  • CGSB 62-GP-2B-1965 Decalcomanias: General Purpose, for Use on Exterior and Interior Surfaces, Specification for

American Society of Mechanical Engineers (ASME), Film inside and outside

  • ASME N-552-2001 Alternative Methods - Qualification for Nozzle Inside Radius Section from the Outside Surface Section XI, Division 1

PL-PKN, Film inside and outside

  • PN C94300-030-1988 Tires and tubes Tire tread abrasion test on -roads
  • PN C94300-38-1988 Tires and tubes Properties of rubber for tires tread
  • PN F06100-08-1988 Furniture Testing methods for the properties of lacquered and decorative luminated surfaces Determination of ultraviolet light resistance and light resistance degree

ZA-SANS, Film inside and outside

  • SANS 1227:2005 Textured wall coatings, emulsion base, for interior and exterior use
  • SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

American Bearing Manufacturers Association, Film inside and outside

  • ABMA 15-1991 Ball Bearings with Spherical Outside Surfaces and Extended Inner Ring Width (Includes Eccentric Locking Collars) Includes Errata: 1991

Professional Standard - Ocean, Film inside and outside

  • HY/T 266-2018 Hydrophilic property testing for outside-in hollow fiber ultrafiltration membrane—Contact angle method

TR-TSE, Film inside and outside

  • TS 3108-1978 PLYVVOOD - VENEER PLYVVOOD WITH ROTARY CUT VENEER FOR GENERAL USE - CLASS1FICATION BY APPEARANCE OF PANELS WITH OUTER VENEERS OF POPLAR
  • TS 3107-1978 Plywood - Veneer Plywood With Rotary Cut Veneer For General Use - Classification By Appearance Of Panels With Outer Veneers Of Beech

Taiwan Provincial Standard of the People's Republic of China, Film inside and outside

  • CNS 5507-1982 Rolling Bearings Bearing with Spherical Outside Surface and Extended Inner Ring Width, Insert BEARING

GM North America, Film inside and outside

  • GM GM9165P-1993 Test for the Embossing Properties of Dielectrically Bonded Flat Vinyl Coated Metallized Mylar

Shandong Provincial Standard of the People's Republic of China, Film inside and outside

  • DB37/T 4168-2020 Technical regulations for soil environmental safety monitoring of fully biodegradable agricultural ground cover films
  • DB37/T 4183.1-2020 Technical regulations for the application of fully biodegradable agricultural ground cover films for major crops Part 1: Peanut
  • DB37/T 4183.5-2020 Technical regulations for the application of fully biodegradable agricultural ground cover films for major crops Part 5: Tobacco
  • DB37/ 4183.2-2020 Technical regulations for the application of fully biodegradable agricultural ground cover films for major crops Part 2: Garlic
  • DB37/T 4183.4-2020 Technical regulations for the application of fully biodegradable agricultural ground cover films for major crops Part 4: Cotton
  • DB37/T 4183.2-2020 Technical regulations for the application of fully biodegradable agricultural ground cover films for major crops Part 2: Garlic
  • DB37/T 4183.3-2020 Technical regulations for the application of fully biodegradable agricultural ground cover films for major crops Part 3: Potatoes

Society of Automotive Engineers (SAE), Film inside and outside

  • SAE AMS3603A-2002 (R) Protective Film, High Performance, Polymeric Pressure Sensitive Adhesive, for Aircraft Exterior Applications
  • SAE AS3504B-2012 Insert - Thin Wall, Short Self-Locking, 1025 degrees F, Silver Plated on Internal Surfaces Only UNS N07718, UNJ Thread
  • SAE AS3505B-2012 Insert - Thin Wall, Long Self-Locking, 1025 degrees F, Silver Plated on Internal Surfaces Only, UNS N07718, UNJ Thread

ESDU - Engineering Sciences Data Unit, Film inside and outside

  • ESDU 74043-1974 Flexibilities of and stresses in unrestrained pressurised thin pipe bends subjected to in-plane bending.

Professional Standard - Aviation, Film inside and outside

  • HB 3352-1981 Internal and external blades for 3－1/2 ~18 spiral bevel gear single blade cutter head (Trial Implementation)
  • HB 3351-1981 Internal and external blades for 3－1/2 ~18 spiral bevel gear alternate blade cutter head (Trial Implementation)

Jiangsu Provincial Standard of the People's Republic of China, Film inside and outside

  • DB32/T 4378-2022 Four-probe method for non-destructive testing of sheet resistance of nanometer and submicron scale thin films on substrate surface

Underwriters Laboratories (UL), Film inside and outside

  • UL 61646-2012 UL Standard for Safety Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval (First Edition)

VN-TCVN, Film inside and outside

  • TCVN 4412-1987 Canned foods.Method for determination of can appearance, tightness and inner surface state

SE-SIS, Film inside and outside

  • SIS SMS 2502-1974 Refrigerators for household use. Determination of externat dimensions, interna/ volumes and storage areas

IN-BIS, Film inside and outside

National Association of Corrosion Engineers (NACE), Film inside and outside

  • NACE RP0388-2001 Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks Item No. 21040
  • NACE SP0388-2007 Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks Item No. 21040

CENELEC - European Committee for Electrotechnical Standardization, Film inside and outside

  • EN 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies

American Water Works Association (AWWA), Film inside and outside

  • AWWA D104-2011 Automatically Controlled, Impressed-Current Cathodic Protection for the Interior Submerged Surfaces of Steel Water Storage Tanks

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Film inside and outside

  • ASHRAE 3916-1995 Effects of Surface Enhancement@ Film-Feed Supply Rate@ and Bundle Geometry on Spray Evaporation Heat Transfer Performance

  in-plane and out-of-plane, Out-of-Plane Diffraction In-Plane Diffraction, out-of-plane and in-plane, Film inside and outside.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved