ZH
RU
ES

Test fluidity

Test fluidity, Total:498 items.

In the international standard classification, Test fluidity involves: Fluid power systems, Hydraulic fluids, Road vehicle systems, Acoustics and acoustic measurements, Surface treatment and coating, Valves, Measurement of fluid flow, Pipeline components and pipelines, Rubber, Compressors and pneumatic machines, Plastics, Ergonomics, Products of the chemical industry, Vocabularies, Analytical chemistry, Corrosion of metals, Environmental protection, Rubber and plastics products, Waxes, bituminous materials and other petroleum products, Aerospace fluid systems and components, Vibrations, shock and vibration measurements, Lubricants, industrial oils and related products, Radiation measurements, Cellular materials, Products of the textile industry, Non-destructive testing, Ceramics, Protection against fire, Paints and varnishes, Metalliferous minerals, Medical equipment, Fuel cells, Chipless working equipment, Metrology and measurement in general, Environmental testing, Measurement of volume, mass, density, viscosity, Telecommunication systems, Construction materials, Radiation protection, Pumps, Safety of machinery, Laboratory medicine, Equipment for petroleum and natural gas industries, Protective equipment, Equipment for processing of minerals, Earthworks. Excavations. Foundation construction. Underground works, Linear and angular measurements.

Japanese Industrial Standards Committee (JISC), Test fluidity

JIS B 8386:2000 Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics
JIS B 8386:2011 Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics
JIS B 8397-2:2001 Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability
JIS B 8390:2000 Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics
JIS B 8348:2002 Hydraulic fluid power -- Pumps and motors -- Test methods
JIS B 8661:2002 Hydraulic fluid power -- Test method for electrically controlled oil hydraulic pumps
JIS B 8356-6:2011 Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 6: Filter elements -- Determination of resistance to flow fatigue using particulate contaminant
JIS B 8397-3:2001 Hydraulic fluid power -- Determination of characteristics of motors -- Part 3: At constant flow and at constant torque
JIS B 9930:2000 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using a microscope
JIS B 8350-1:2003 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps
JIS B 9934:2012 Hydraulic fluid power -- Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
JIS B 8384:2011 Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance
JIS B 8350-2:2003 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors
JIS B 9939-1:2003 Hydraulic fluid power -- Measurement techniques -- Part 1: General measurement principles
JIS B 9930:2006 Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope
JIS B 8397-1:2001 Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and at constant pressure
JIS B 9934:2000 Hydraulic fluid power -- Determination of particulate contamination by automatic counting using the light extinction principle
JIS B 8671:2006 Hydraulic fluid power -- Compatibility between fluids and standard elastomeric materials
JIS B 8356-8:2002 Hydraulic fluid power filters -- Multi-pass method for evaluating filtration performance of a filter element
JIS B 8672-1:2023 Pneumatic fluid power -- Assessment of component reliability by testing -- Part 1: General procedures
JIS B 8390-1:2016 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow
JIS B 8659-1:2000 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves
JIS B 8672-2:2023 Pneumatic fluid power -- Assessment of component reliability by testing -- Part 2: Directional control valves
JIS B 8672-4:2023 Pneumatic fluid power -- Assessment of component reliability by testing -- Part 4: Pressure regulators
JIS B 8306:2002 Centrifugal type oil pumps -- Hydraulic performance acceptance tests by oil as testing liquid
JIS B 8659-2:2002 Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves

International Organization for Standardization (ISO), Test fluidity

ISO 23181:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using high viscosity fluid
ISO 4411:2008 Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics
ISO 17559:2003 Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics
ISO 4534:1980 Vitreous and porcelain enamels; Determination of fluidity behaviour; Fusion flow test
ISO 15086-3:2008 Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance
ISO 3724:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using particulate contaminant
ISO 6072:1986 Hydraulic fluid power; Compatibility between elastomeric materials and fluids
ISO 18869:2017 Hydraulic fluid power — Test methods for couplings actuated with or without tools
ISO 10770-3:2020 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
ISO 6073:1980 Hydraulic fluid power; Petroleum fluids; Prediction of bulk moduli
ISO/PRF TR 16203:2023 Overview of methods available for particle-free erosion corrosion testing in flowing liquids
ISO/TR 16203:2023 Overview of methods available for particle-free erosion corrosion testing in flowing liquids
ISO 5352-1:2023 Hydraulic fluid power — Determination of discharge flow rate and thermal losses of gas loaded accumulators — Part 1: Test method
ISO 15086-3:2022 Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance
ISO 9104:1991 Measurement of fluid flow on closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids
ISO 6358-2:2019 Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 2: Alternative test methods
ISO/DIS 21018-1:2023 Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 1: General principles
ISO/CD 21018-1 Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 1: General principles
ISO 4411:1986 Hydraulic fluid power; Valves; Determination of pressure differential/flow characteristics
ISO/FDIS 5352-1 Hydraulic fluid power — Determination of discharge flow rate and thermal losses of gas loaded accumulators — Part 1: Test method
ISO 18237:2017 Hydraulic fluid power - Method for evaluating water separation performance of dehydrators
ISO 19361:2017 Measurement of radioactivity — Determination of beta emitters activities — Test method using liquid scintillation counting
ISO 4411:2019 Hydraulic fluid power — Valves — Determination of pressure differential/flow characteristics
ISO 4534:2010 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
ISO 4405:2022 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method
ISO 15086-1:2001 Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 1: Introduction
ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 6358:1989 Pneumatic fluid power; components using compressible fluids; determination of flow-rate characteristics
ISO 6072:2002 Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials
ISO 10770-3:2007 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
ISO 1133:1981 Plastics — Determination of the melt flow rate of thermoplastics
ISO 21903:2020 Refrigerated hydrocarbon fluids — Dynamic measurement — Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydro
ISO/CD 4407 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope

Association Francaise de Normalisation, Test fluidity

NF E48-706*NF ISO 23181:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using high viscosity fluid
NF EN 17534:2022 Textiles - Effets physiologiques - Mesurage du transfert de sueur liquide et de l'effet tampon vis-à-vis de la sueur liquide
NF E48-690:1990 Hydraulic fluid power. Fluids. Measurement of filtrability of mineral oils.
NF E48-032*NF ISO 10100:2020 Hydraulic fluid power - Cylinders - Acceptance tests
NF E48-692:1997 Hydraulic fluid power. Fluids. Measurement of filtrability of HFC and HFD class fire resistant fluids.
FD E48-154:2002 Hydraulic fluid power - Test method for determinating the flowrate performances of hydro-pneumatic accumulators
NF ISO 4392-2:2002 Transmissions hydrauliques - Détermination des caractéristiques des moteurs - Partie 2 : essai de démarrage
NF E48-415:2008 Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics.
NF E48-032:2002 Hydraulic fluid power - Cylinders - Acceptance tests.
NF E48-691:1995 Hydraulic fluid power. Fluids. Measurement of filtrability of minerals oils in the presence of water.
NF E48-382*NF ISO 4392-2:2002 Hydraulic fluid power - Determination of characteristics of motors - Part 2 : startability
NF E48-673:1989 Hydraulic fluid power. Filter elements. Methods for checking the compatibility of materials with fluids.
NF E48-614:1973 FLUIDS FOR HYDRAULIC POWER SYSTEMS-DETERMINATION OF DEAERATION ABILITY OF FIRE-RESISTANT FLUIDS
NF E48-392-3*NF ISO 15086-3:2009 Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 3 : measurement of hydraulic impedance
NF ISO 15086-3:2022 Transmissions hydrauliques - Évaluation des caractéristiques du bruit liquidien des composants et systèmes - Partie 3 : mesurage de l'impédance hydraulique
NF E48-392-2*NF ISO 15086-2:2001 Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2 : measurement of the speed of sound in a fluid in a pipe
NF ISO 4392-1:2002 Transmissions hydrauliques - Détermination des caractéristiques des moteurs - Partie 1 : essai à pression constante et basse vitesse constante
NF E48-752:2017 Hydraulic fluid power - Fluids - Determination of fire resistant fluids overall particulate contamination by the gravimetric method
NF E48-652:1990 Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the gravimetric method.
NF ISO 6358-2:2020 Transmissions pneumatiques - Détermination des caractéristiques de débit des composants traversés par un fluide compressible - Partie 2 : méthodes d'essai alternatives
NF E48-083:1990 Hydraulic fluid power. Hose assemblies. Methods of test.
NF E49-160-2*NF ISO 6358-2:2020 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 2 : alternative test methods
NF E48-383:1989 Hydraulic fluid power. Motors. Determination of performances characteristics at constant flow and constant torque.
NF ISO 3724:2007 Transmissions hydrauliques - Éléments filtrants - Détermination de la résistance à la fatigue due au débit en utilisant un contaminant particulaire
NF E48-084:1990 Hydraulic fluid power. Connecting hoses. Flame resistance.
NF E48-677:2002 Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics.
NF E49-160-2:2013 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 2: alternative test methods
NF E48-380*NF ISO 4409:2019 Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
NF E48-354:1989 Hydraulic fluid power. Positive displacement pumps and motors.
NF E48-380:1990 Hydraulic fluid power. Positive displacement pumps, motors and integral transmissions. Determination of steady-state performance.
NF E48-380:2007 Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance.
NF E48-392-1*NF ISO 15086-1:2002 Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 1 : introduction
NF ISO 15086-2:2001 Transmissions hydrauliques - Évaluation des caractéristiques du bruit liquidien des composants et systèmes - Partie 2 : mesurage de la vitesse du son émis dans un fluide dans une tuyauterie
NF E48-032/A1:2012 Hydraulic fluid power - Cylinders - Acceptance tests - Amendment 1.
NF E48-664*NF ISO 18237:2018 Hydraulic fluid power - Method for evaluating water separation performance of dehydrators
NF E48-675:1988 Hydraulic fluid power. Filter elements. Resistance to the fatigue due to cyclic flow variations.
NF X10-121:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids.
NF E49-160-1*NF ISO 6358-1:2013 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1: general rules and test methods for steady-state flow
P15-437:1987 Hydraulic binders. Testing technics. Characterization of cements by fluidity measurement under mortar vibration.
NF ISO 10770-2:2013 Transmissions hydrauliques - Distributeurs hydrauliques à modulation électrique - Partie 2 : méthodes d'essai pour distributeurs de commande de débit à trois voies
NF E48-075:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
NF E48-655:1992 Hydraulic fluid power. Fluids. Particulate contamination. Expression of results.
NF E48-658:1990 Hydraulic fluid power. Fluids. Determination of particulate contamination by automatic counting using the light interruption principle.
NF ISO 10770-1:2009 Transmissions hydrauliques - Distributeurs hydrauliques à modulation électrique - Partie 1 : méthodes d'essai pour distributeurs de commande de débit à quatre voies
NF E48-381*NF ISO 4392-1:2002 Hydraulic fluid power - Determination of characteristics of motors - Part 1 : at constant low speed and constant pressure
NF E48-674*NF ISO 3723:2015 Hydraulic fluid power - Filter elements - Method for end load test
NF E48-674:1988 Hydraulic fluid power. Filter elements. Method for end load test.
NF E48-083*NF ISO 6605:2017 Hydraulic fluid power - Test methods for hoses and hose assemblies
NF E49-300:2000 Pneumatic fluid power - Method of characterization of air debit coefficients by drains reservoir.
NF A92-202*NF EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
NF E48-661-1*NF ISO 21018-1:2008 Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - Part 1 : general principles.
NF E49-160-1/A1*NF ISO 6358-1/A1:2020 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1 : general rules and test methods for steady-state flow - Amendment 1 : effective conductance
NF E48-660:1991 Hydraulic fluid systems. Fluids. Determination of solid particulate contamination by optical microscope and image analysis.
NF E48-075:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections.
NF EN ISO 10414-1:2010 Industries du pétrole et du gaz naturel - Essais in situ des fluides de forage - Partie 1 : fluides aqueux
NF E48-707*NF ISO 23369:2021 Hydraulic fluid power - Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
NF E48-651*NF ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope.
NF P18-469:2023 Essai pour béton frais - Temps d'écoulement au cône
NF E48-041:1995 Hydraulic fluid power. Multiple lip packing sets. Methods for measuring stock heights.
NF ISO 6358-1:2013 Transmissions pneumatiques - Détermination des caractéristiques de débit des composants traversés par un fluide compressible - Partie 1 : règles générales et méthodes d'essai en régime stationnaire
NF E49-160-3*NF ISO 6358-3:2015 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fmuids - Part 3 : method for calculating steady-state flow-rate characteristics of systems
NF E48-651:1986 Hydraulic fluid power. Fluids. Determination of particulate contamination by the counting method using a microscope.
NF ISO 4405:2022 Transmissions hydrauliques - Pollution des fluides - Détermination de la pollution particulaire par la méthode gravimétrique
NF ISO 10770-3:2020 Transmissions hydrauliques - Distributeurs hydrauliques à modulation électrique - Partie 3 : méthodes d'essai pour distributeurs de commande de pression
NF E48-610-1:2004 Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials - Part 1 : formulation and preparation of test elastomers.
NF E48-661-4*NF ISO 21018-4:2019 Hydraulic fluid power - Monitoring the level of particulate contamination in the fluid - Part 4 : use of the light extinction technique
NF E48-685*NF ISO 16889:2022 Hydraulic fluid power - Filters - Multi-pass method for evaluating filtration performance of a filter element
NF E48-695:2003 Hydraulic fluid power - Parts and components - Expression of particulate pollution measurement results.
NF E48-610-2:2004 Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials - Part 2 : test methods.
NF E48-661-3*NF ISO 21018-3:2008 Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - Part 3 : use of the filter blockage technique.
NF ISO 4411:2020 Transmissions hydrauliques - Distributeurs - Détermination des caractéristiques de pression différentielle/débit
NF E48-658*NF ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle.
NF ISO 18869:2020 Transmissions hydrauliques - Méthodes d'essai pour les raccords actionnés avec ou sans outils
NF E48-035:1993 Hydraulic fluid power. Cylinders. Pistons housings for elastomer-energized, plastic-faced seals Dimensions and tolerances.
NF ISO 6403:2019 Transmissions hydrauliques - Régulateurs de débit et de la pression - Méthodes d'essai
NF E48-201*NF EN ISO 4413:2011 Hydraulic fluid power - General rules and safety requirements for systems and their components
NF ISO 4392-3:2005 Transmissions hydrauliques - Détermination des caractéristiques des moteurs - Partie 3 : essai à débit constant et couple constant
NF EN 60861:2008 Équipements pour la surveillance des radionucléides dans les effluents liquides et les eaux de surface
NF E48-440-3*NF ISO 10770-3:2020 Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 3 : test methods for pressure control valves

British Standards Institution (BSI), Test fluidity

BS ISO 23181:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using high viscosity fluid
BS ISO 10100:2020 Hydraulic fluid power. Cylinders. Acceptance tests
BS ISO 4392-2:2002 Hydraulic fluid power - Determination of characteristics of motors - Startability
BS ISO 17559:2003 Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics
BS ISO 4411:2008 Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics
BS ISO 4411:2019 Hydraulic fluid power. Valves. Determination of differential pressure/flow rate characteristics
BS ISO 15086-2:2000 Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe
19/30375041 DC BS ISO 10100. Hydraulic fluid power. Cylinders. Acceptance tests
BS ISO 15086-3:2022 Hydraulic fluid power. Determination of the fluid-borne noise characteristics of components and systems - Measurement of hydraulic impedance
BS ISO 15086-1:2001 Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Hydraulic fluid power - Determination of the fluid borne noise characteristics of components and systems - Introduction
BS ISO 5352-1:2023 Hydraulic fluid power. Determination of discharge flow rate and thermal losses of gas loaded accumulators - Test method
BS 4617:1983 Methods for determining the performance of pumps and motors for hydraulic fluid power transmission
BS ISO 6358-2:2019 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids - Alternative test methods
BS 7275-3:1995 Determination of hydraulic fluid power motor characteristics. Method at constant flow and at constant torque
BS ISO 4405:2022 Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the gravimetric method
BS ISO 4392-1:2002 Hydraulic fluid power - Determination of characteristics of motors - At constant low speed and constant pressure
BS EN 29104:1991 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
BS ISO 10770-2:2012 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for three-port directional flow-control valves
BS ISO 6358-1:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. General rules and test methods for steady-state flow
BS ISO 6358-1:2013+A1:2020 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. General rules and test methods for steady-state flow
BS ISO 9110-1:2020 Hydraulic fluid power. Measurement techniques - General measurement principles
BS ISO TR 3313:1998 Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations on flow-measurement instruments
BS ISO 4409:2007 Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
21/30430260 DC BS ISO 4405. Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the gravimetric method
BS EN 1267:1999 Valves - Test of flow resistance using water as a test fluid
BS ISO 18237:2017 Hydraulic fluid power. Method for evaluating water separation performance of dehydrators
BS ISO 10771-1:2015 Tracked Changes. Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Test method
PD ISO/TR 4808:2021 Hydraulic fluid power. Interpolation method for particle count and filter test data
BS ISO 6605:2017 Tracked Changes. Hydraulic fluid power. Test methods for hoses and hose assemblies
BS 7294:1990 Methods for determination of flow-rate characteristics of pneumatic fluid power components
BS ISO 10770-3:2007 Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
BS ISO 10770-3:2020 Tracked Changes. Hydraulic fluid power. Electrically modulated hydraulic control valves. Test methods for pressure control valves
BS EN ISO 4534:2011 Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test
BS EN ISO 4534:2010 Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test
BS PD ISO/TR 4808:2021 Hydraulic fluid power. Interpolation method for particle count and filter test data
PD ISO/TR 10771-2:2008 Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Rating method
BS EN 1267:2012 Industrial valves. Test of flow resistance using water as test fluid
BS ISO 16860:2005 Hydraulic fluid power. Filters. Test method for differential pressure devices
BS ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
19/30378151 DC BS ISO 6358-1 AMD1. Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Part 1. General rules and test methods for steady-state flow
BS 5944-2:1992 Measurement of airborne noise from hydraulic fluid power systems and components. Method of test for motors
BS 5944-1:1992 Measurement of airborne noise from hydraulic fluid power systems and components. Method of test for pumps
19/30376110 DC BS EN ISO 19879. Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
BS ISO 11500:2008 Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
BS ISO 2941:1996 Hydraulic fluid power - Filter elements - Verification of collapse/burst resistance
BS ISO 8426:2008 Hydraulic fluid power - Positive displacement pumps and motors - Determination of derived capacity
BS ISO 21018-3:2008 Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - Use of the filter blockage technique
20/30423408 DC BS ISO 15086-3. Hydraulic fluid power. Determination of the fluid-borne noise characteristics of components and systems. Part 3. Measurement of hydraulic impedance
BS ISO 3723:1976 Hydraulic fluid power - Filter elements - Method for end load test
BS ISO 3723:1996 Hydraulic fluid power. Filter elements. Method for end load test
BS ISO 3723:2015 Hydraulic fluid power. Filter elements. Method for end load test
BS ISO 4409:2019 Tracked Changes. Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance
BS EN ISO 4263-2:2003 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for category HFC hydraulic fluids
PD ISO/TR 16203:2023 Tracked Changes. Overview of methods available for particle-free erosion corrosion testing in flowing liquids
BS ISO 21018-4:2019 Tracked Changes. Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid. Use of the light extinction technique
BS ISO 18869:2017 Tracked Changes. Hydraulic fluid power. Test methods for couplings actuated with or without tools
BS 4062-2:1990 Valves for hydraulic fluid power systems. Methods for determining performance
BS EN ISO 19879:2021 Tracked Changes. Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
BS ISO 21018-1:2008 Hydraulic fluid power - Monitoring the level of particulate contamination of the fluid - General principles
BS ISO 6358-2:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Alternative test methods
BS ISO 23783-2:2022 Automated liquid handling systems - Measurement procedures for the determination of volumetric performance
BS EN ISO 23783-2:2023 Automated liquid handling systems - Measurement procedures for the determination of volumetric performance
BS ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
BS EN 982:1996 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
BS ISO 6358-3:2014 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Method for calculating steady-state flow-rate characteristics of systems
PD ISO/TR 19972-1:2009 Hydraulic fluid power. Methods to assess the reliability of hydraulic components. General procedures and calculation method
BS 7198-1:1989 Hydraulic fluid power quick-action couplings - Specification for dimensions and performance
BS ISO 21018-4:2016 Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid. Use of the light extinction technique
BS EN 60068-2-60:2015 Tracked Changes. Environmental testing. Tests. Test Ke: Flowing mixed gas corrosion test
22/30429423 DC BS ISO 11500. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
BS 1344-18:1981 Methods of testing vitreous enamel finishes - Determination of fluidity behaviour: fusion flow test
22/30446471 DC BS ISO 23369. Hydraulic fluid power. Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
20/30347205 DC BS ISO 23369. Hydraulic fluid power. Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
19/30372061 DC BS ISO 10770-3. Hydraulic fluid power. Electrically modulated hydraulic control valves. Part 3. Test methods for pressure control valves
BS ISO 10771-1:2002 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Test method
BS 5944-6:1992 Measurement of airborne noise from hydraulic fluid power systems and components. Method of test for pumps using a parallelepiped microphone array
BS EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters
BS ISO 11500:2022 Tracked Changes. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
19/30371857 DC BS ISO 9110-1. Hydraulic fluid power. Measurement techniques. Part 1. General measurement principles
BS ISO 9110-2:2020 Hydraulic fluid power. Measurement techniques - Measurement of average steady-state pressure in a closed conduit
BS 2000-281:1993 Methods of test for petroleum and its products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
BS ISO 23783-3:2022 Automated liquid handling systems - Determination, specification and reporting of volumetric performance
BS EN ISO 23783-3:2023 Automated liquid handling systems - Determination, specification and reporting of volumetric performance
BS ISO 23369:2022 Tracked Changes. Hydraulic fluid power. Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions

Korean Agency for Technology and Standards (KATS), Test fluidity

KS B ISO 23181:2009 Hydraulic fluid power－Filter elements－Determination of resistance to flow fatigue using high viscosity fluid
KS B ISO 17559:2005 Hydraulic fluid power-Electrically controlled hydraulic pumps-Test methods to determine performance characteristics
KS B ISO 17559:2013 Hydraulic fluid power－Electrically controlled hydraulic pumps－Test methods to determine performance characteristics
KS B ISO 23181-2009(2019) Hydraulic fluid power－Filter elements－Determination of resistance to flow fatigue using high viscosity fluid
KS B ISO 10100-2003(2008) Hydraulic fluid power－Cylinders－Acceptance tests
KS B ISO 6403-2004(2009) Hydraulic fluid power－Valves controlling flow and pressure－Test methods
KS B ISO 6072-2002(2012) Hydraulic fluid power－Compatibility between elastomeric materials and fluids
KS I ISO 27407-2014(2019) Hydraulic fluid power — Marking of performance characteristics on hydraulic filters
KS I ISO 27407:2014 Hydraulic fluid power — Marking of performance characteristics on hydraulic filters
KS B 6931-2005(2010) Pneumatic fluid power－Determination of flow-ratecharacteristics of pneumatic control valves
KS B ISO 15086-2-2006(2011) Hydraulic fluid power－Determination of fluid-borne noise characteristics of components and systems－Part 2：Measurement of speed of sound in a fluid in a pipe
KS M 3070-2013 Testing method for melt flow rate of thermoplastics
KS B 5325-2009 Proving methods for liquid flowmeters
KS M 3978-2019 Magnetorheological elastomer — Determination of dynamic magnetorheological properties by shear vibration
KS B ISO 15086-1-2006(2011) Hydraulic fluid power－Determination of fluid-borne noise characteristics of components and systems－Part 1：Introduction
KS M ISO 4404-2-2012(2017) Petroleum and related products－Determination of the corrosion resistance of fire-resistant hydraulic fluids－Part 2：Non-aqueous fluids
KS M ISO 4404-2-2012(2022) Petroleum and related products－Determination of the corrosion resistance of fire-resistant hydraulic fluids－Part 2：Non-aqueous fluids
KS I ISO 4405-2005(2020) Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the gravimetric method
KS M ISO 6073-2003(2008) Petroleum products－Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
KS B ISO 6072:2002 Hydraulic fluid power-Compatibility between elastomeric materials and fluids
KS M 3070-2011 Testing method for melt flow rate of thermoplastics
KS M 3070-1986 Testing method for melt flow rate of thermoplastics
KS I ISO 3724-2009(2019) Hydraulic fluid power－Filter elements－Determination of resistance to flow fatigue using particulate contaminant
KS B ISO 15086-2:2006 Hydraulic fluid power-Determination of fluid-borne noise characteristics of components and systems-Part 2:Measurement of speed of sound in a fluid in a pipe
KS L 1626-2017 Testing method for flowability of fine ceramic powders
KS C IEC 60068-2-60:2019 Environmental testing — Part 2-60: Tests —Test Ke: Flowing mixed gas corrosion test
KS F 2428-1990 Testing Method for Determination of Vibrating Factor by Consistency of Concrete
KS C IEC 60861-2012(2022) Equipment for monitoring of radionuclides in liquid effluents and surface waters
KS B ISO 15086-1:2006 Hydraulic fluid power-Determination of fluid-borne noise characteristics of components and systems-Part 1:Introduction
KS M ISO 6073:2003 Petroleum products-Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
KS M ISO 6073:2013 Petroleum products－Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
KS B ISO 21018-1-2014(2019) Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 1: General principles
KS M 3004-2013 Testing method for flow properties of thermoplastics with a capillary rheometer
KS F 2303-2000 Test method for liquid limit and plastic limit of soils
KS B ISO 4392-3-2002(2012) Hydraulic fluid power－Determination of characteristics of motors－Part 3：At constant flow and at constant torque
KS F 2594-2009 Method of test for slump flow of fresh concrete

RO-ASRO, Test fluidity

STAS SR ISO 10100:1996 Hydraulic fluid power - Cylinders - Acceptance test
STAS 7347/3-1983 D etermination of fluid flow in pressure pipe systems METHOD BY KEDUCTING THE FLOW SECTION MEASUREMENT BY VENT.URI TUBES ANU NOZZLES
STAS 10041-1975 LIQUID PENETRANT FLOW DETECTION Terminology
STAS 12055-1982 MEASUREMENT OF FLUID FLOW Vocabulary
STAS 7347/1-1983 Measurement of fluid flow in pressure pipe systems METHOD BY THROTTLING THE FLOW SEGTION. MEASUREMENT BYORIFICEPLATESAND NOZZLES
SR ISO 4411:1994 Hydraulic fluid power - Valves - Determination of pressure differential / flow characteristics
STAS 9917-1974 Hydroslatic drives DEVICES Mcthods of testing
STAS SR ISO 3724:1993 Hdrauilc fiuid power. Filter elernents . Verification of flow fatigue charcteristics.
SR ISO 4407:1991 Hydraulic fluid power -Fluid contamination - Determinatidn of particulate contamination by the counting method using a microscope
STAS 9047-1971 PLASTICS Determination of the melt flow rate of thermoplastics

American Society for Testing and Materials (ASTM), Test fluidity

ASTM D6351-22 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D6351-10 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D6351-10(2016) Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D3585-08(2020) Standard Specification for ASTM Reference Fluid for Coolant Tests
ASTM D6351-99 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D6351-99(2005) Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D8385-22 Standard Test Method for Dry Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique
ASTM D8277-20 Standard Test Method for Wet Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique
ASTM D5621-19 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids
ASTM D5621-20 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids
ASTM D5154-91 Standard Test Method for Determining the Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D7605-11 Standard Test Method for Thermoplastic ElastomersMeasurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D4440-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology
ASTM D4440-08 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
ASTM D5621-94 Standard Test Method for Sonic Shear Stability of Hydraulic Fluid
ASTM D5621-01 Standard Test Method for Sonic Shear Stability of Hydraulic Fluid
ASTM D5621-07(2013) Standard Test Method for Sonic Shear Stability of Hydraulic Fluids
ASTM D5621-07 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids
ASTM D7605-11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D7605-11(2022) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM E3277-21 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM E3277-22 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM D6546-23 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
ASTM D2619-21 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
ASTM D4486-91(2006) Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
ASTM D4486-91(2001) Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
ASTM D4486-91(1996)e1 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
ASTM D4486-18 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
ASTM D4486-10 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
ASTM D4486-91(2010) Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
ASTM D1238-20 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-23 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D4525-04 Standard Test Method for Permeability of Rocks by Flowing Air
ASTM D4525-08 Standard Test Method for Permeability of Rocks by Flowing Air

Cooling Technology Institute, Test fluidity

CTI STD-146-2008 Standard for Liquid Flow Measurement

AENOR, Test fluidity

UNE 101400:1993 HYDRAULIC FLUID POWER. HOSE ASSEMBLIES. METHOD OF TEST.
UNE-EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
UNE-EN 29104:1996 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS. METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS. (ISO 9104:1991).
UNE 22910:2007 Hardly flammable fluids intended to be used in hydraulic fluids. Flammability test and flame propagation test.
UNE 26325:1989 ROAD VEHICLES. HYDRAULIC BRAKES. LIQUIDS WITJH PETROLEUM BASE FOR BRAKES AND CENTRALIZED CIRCUITS. HIGROSCOPICITY TEST.
UNE-EN 60068-2-60:1997 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST KE: FLOWING MIXED GAS CORROSION TEST.
UNE-EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)

Society of Automotive Engineers (SAE), Test fluidity

SAE J1117-1986 Method of Measuring and Reporting the Pressure differential-Flow characteristics of a Hydraulic Fluid Power Valve
SAE J1117-2019 Method of Measuring and Reporting the Pressure differential-Flow characteristics of a Hydraulic Fluid Power Valve
SAE J643B-1979 HYDRODYNAMIC DRIVE TEST CODE
SAE J2658-2003 Metallic Tube Conductor Assemblies for Fluid Power and General UseTest Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J1235-1986 Measuring and Reporting the Internal Leakage of a Hydraulic fluid power Valve
SAE J1235-2023 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve
SAE ARP1797-1991 AIRCRAFT AND AIRCRAFT ENGINE FUEL PUMP LOW LUBRICITY FLUID ENDURANCE TEST
SAE J1644-1998 Metallic Tube Connections for Fluid Power and General Use - Test Methods for Threaded Hydraulic Fluid Power Connectors
SAE TS377-1-1990 TS377 Test for Silicone Elastomer High Temperature Endurance and Fluid Resistance
SAE J2470-1999 Hydraulic Fluid PowerValvesMethod for Assessing the Lock Sensitivity to Contaminants
SAE J1276-1979 Standardized Fluid for Hydraulic Component Tests, Recommended Practice
SAE ARP1797A-2014 Aircraft and Aircraft Engine Fuel Pump Low Lubricity Fluid Endurance Test

SAE - SAE International, Test fluidity

SAE J1117-1975 Method of Measuring and Reporting the Pressure Differential-Flow Characteristics of a Hydraulic Fluid Power Valve
SAE J1117-1980 Method of Measuring and Reporting the Pressure Differential-Flow Characteristics of a Hydraulic Fluid Power Valve
SAE ARP6154-2017 Aerospace Fluid Power Electrohydrostatic Module@ Design@ Performance and Test Recommendations
SAE J643-2018 Hydrodynamic Drive Test Code
SAE J643-1989 Hydrodynamic Drive Test Code
SAE J2658-2010 Metallic Tube Conductor Assemblies for Fluid Power and General UseTest Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J2658-2013 Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use - Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies
SAE J1235-2015 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve
SAE J1235-1978 Measuring and Reporting the Internal Leakage of a Hydraulic Fluid Power Valve@ Recommended Practice
SAE J1644-1993 Metallic Tube Connections for Fluid Power and General Use-Test Methods for Threaded Hydraulic Fluid Power Connectors
SAE J1644-2007 Metallic Tube Connections for Fluid Power and General Use-Test Methods for Threaded Hydraulic Fluid Power Connectors
SAE ARP1797-1983 Aircraft and Aircraft Engine Fuel Pump Low Lubricity Fluid Endurance Test
SAE J2890-2010 Hydraulic Fluid Power - Accelerated Method for Determining the Wear Characteristics of a Hydraulic Component Due to Contaminants

German Institute for Standardization, Test fluidity

DIN ISO 10100:2023-04 Hydraulic fluid power - Cylinders - Acceptance tests (ISO 10100:2020)
DIN ISO 10100:2023 Hydraulic fluid power - Cylinders - Acceptance tests (ISO 10100:2020)
DIN ISO 4534:1985 Vitreous and porcelain enamels; determination of fluidity behaviour; fusion flow test
DIN EN ISO 19879:2021-06 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021); German version EN ISO 19879:2021
DIN 65385:1991-12 Aerospace; hydraulic fluid power; filter elements; reporting of test data
DIN EN ISO 19879:2019 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO/DIS 19879:2019); German and English version prEN ISO 19879:2019
DIN EN 29104:1993 Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991); German version EN 29104:1993
DIN 24550-6:1999-04 Fluid power - Hydraulic filters - Part 6: Test filter housings; dimensions
DIN EN ISO 4534:2011-04 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010); German version EN ISO 4534:2010
DIN 24339:2016-04 Hydraulic fluid power - Reservoirs made of steel, nominal sizes 63 to 2 000 - Dimensions, requirements, testing
DIN ISO 10100:2013 Hydraulik fluid power - Cylinders - Acceptance tests (ISO 10100:2001 + Amd.1:2012)
DIN EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010); German version EN ISO 4534:2010
DIN 51389-3:1998 Determination of lubricants - Mechanical testing of hydraulic fluids in the vane-cell-pump - Part 3: Method B for aqueous not easily inflammable hydraulic fluids
DIN 50920-1:1985 Corrosion of metals; corrosion testing in flowing liquids; general
DIN 65385:1991 Aerospace; hydraulic fluid power; filter elements; reporting of test data
DIN 24339:2016 Hydraulic fluid power - Reservoirs made of steel, nominal sizes 63 to 2 000 - Dimensions, requirements, testing

Group Standards of the People's Republic of China, Test fluidity

T/CAIA YQ002-2016 Testing Method of Micro-Flow Liquid
T/CSTM 00031-2020 Thermoplastic elastomer - Determination of the melt mass-flow rate and melt volume-flow rate
T/CPCIF 0148-2021 Plastics—Ultrahigh melt fluidity polypropylene materials— Determination of melt volume-flow rate（MVR）and melt mass-flow rate（MFR）
T/CIET 20-2023 DC motor air tightness automatic test equipment
T/CGA 024-2021 Determination method of fluidity of whole tailings paste in gold mine
T/CCSA 319-2021 User Experience of Smart Terminal-Technical Requirement and Test Methods for Fluency Performance

ES-AENOR, Test fluidity

UNE 53-592-1988

ES-UNE, Test fluidity

UNE-EN ISO 19879:2022 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
UNE-EN ISO 19361:2020 Measurement of radioactivity - Determination of beta emitters activities - Test method using liquid scintillation counting (ISO 19361:2017) (Endorsed by Asociación Española de Normalización in April of 2020.)
UNE-EN 60068-2-60:2016 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test

NO-SN, Test fluidity

NS 5923-1981 Hydraulic fluid power - Filter elements - Verification of flow fatigue characteristics
NS 5922-1981 Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids
NS 5920-1981 Hydraulic fluid power - Filter elements - Verification of collapse/burst resistance

HU-MSZT, Test fluidity

MSZ 1709/12-1983

IT-UNI, Test fluidity

UNI ISO 4409:2020 Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance
UNI ISO 6358-2:2020 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids - Part 2: Alternative test methods
UNI EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
EC 1-2021 UNI ISO 21018-3:2021 Hydraulic fluid power -- Monitoring the level of particulate contamination of the fluid - Part 3: Use of the filter blockage technique
UNI ISO 10770-3:2020 Hydraulic fluid power -- Electrically modulated hydraulic control valves - Part 3: Test methods for pressure control valves

Indonesia Standards, Test fluidity

SNI 13-6677-2002 Reporting of geothermal wells fluid flow test
SNI 13-6605-2001 Test methods for fluid flow geothermal wells
SNI 06-6442-2000 Test methods for rheology of asphalt using dynamic shifting reometer

European Committee for Standardization (CEN), Test fluidity

EN 29104:1993 Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
EN 1267:1999 Valves - Test of Flow Resistance Using Water as Test Fluid
EN 1267:2012 Industrial valves - Test of flow resistance using water as test fluid
EN ISO 19361:2020 Measurement of radioactivity - Determination of beta emitters activities - Test method using liquid scintillation counting (ISO 19361:2017)
EN ISO 4534:2010 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)
EN ISO 4404-2:2010 Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010)
EN 463:1994 Protective Clothing - Protection Against Liquid Chemicals - Test Method: Determination of Resistance to Penetration by a Jet of Liquid (Jet Test)
EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)

GOSTR, Test fluidity

GOST R 58500-2019 Hydraulic fluid power. Marking of performance characteristics on hydraulic filters
GOST 28988-1991 Fluid power systems. Vibration characteristics, vibration tests

Lithuanian Standards Office , Test fluidity

LST EN ISO 19879:2011 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
LST EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
LST ISO 7241-2:2003 Hydraulic fluid power. Quick-action couplings. Part 2: Test methods (idt ISO 7241-2:2000)
LST EN 29104-2001 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
LST EN ISO 9038:2004 Test for sustained combustibility of liquids (ISO 9038:2002)
LST EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010)

AT-ON, Test fluidity

OENORM EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
ONORM C 9515-1982 Testing of plastics; Determination of the Melt-Flow-Index of tbermoplastics
ONORM EN 29104-1993 Measurement of fluid flow in closed conduits - Methods of evaluating the Performance of electromagnetic flow-meters forliquids (ISO 9104:1991)
ONORM C 9445-1985 Testing of elastomeres; determination of the effect of liquids
ONORM C 9445-1998 Testing of elastomeres - Determination of the effect of liquids

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test fluidity

GB 7369-1987 Carrier--Determination of flowability
GB/T 14832-1993 Test of compatibility between rubber material and hydraulic fluid
GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
GB/T 15357-2014 Surface active agents and detergents.Determination of viscosity and flow properties of liquid products using a rotational viscometer
GB/T 23460.1-2009 Test methods of ceramic glazes.Part 1:Determination of fluidity behaviour.Fusion flow test
GB/T 17286.2-2016 Liquid hydrocarbons.Dynamic measurement.Proving systems for volumetric meters.Part 2: Pipe provers
GB/T 17286.2-1998 Liquid hydrocarbons--Dynamic measurement--Proving systems for volumetric meters--Part 2: Pipe provers
GB/T 30176-2013 Filter for liquid filtration.Performance measurement methods
GB/T 11547-2008 Plastic.Methods of test for the determination of the effects of immersion in liquid chemicals
GB/T 18659-2002 Measurement of fluid flow in closed conduits--Methods of evaluating the performance of electromagnetic flow-meters for liquids

IN-BIS, Test fluidity

IS 13614 Pt.2-1993 Hydraulic fluid power. Quick-action couplings. Part 2: Test methods
IS 12092-1987
IS 8532-1977
IS 10810 Pt.23-1984

Danish Standards Foundation, Test fluidity

DS/ISO 6072:1989 Hydraulic fluid power. Compatibility between elastomeric materials and fluids
DS/EN ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections (ISO 19879:2021)
DS/ISO 6073:1989 Hydraulic fluid power. Petroleum fluids. Prediction of bulk moduli
DS/ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections
DS/EN 29104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/ISO 9104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
DS/EN 29104:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test
DS/EN 60861:2008 Equipment for monitoring of radionuclides in liquid effluents and surface waters
DS/EN ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test)

PL-PKN, Test fluidity

PN M73283-1988 Hydraulic fluid power Valves Determination of pressure differential/flow characteristics
PN M42363-1986 Turbin? flowmeters for li?uids e?uirements and Tests
PN-ISO 4407-2021-03 P Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope
PN M73763-1992 Pneumatic fluid power. Components using compressible fluids. Determination of flow-rate characteristics
PN-EN ISO 19879-2021-08 E Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections (ISO 19879:2021)
PN C89069-1993 Plastics. Determination of the melt massflow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
PN BN 7469-07-1966 Printing inks Methods of testing Determination of flow property

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Test fluidity

ASHRAE 4841-2006 The Effect of Elbows on the Accuracy of Liquid Flow Measurement with an Insertion Flowmeter
ASHRAE 41.8-1989 Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters

CZ-CSN, Test fluidity

CSN 25 7712-1995 Measurement of fluid flow in closed conduits. Measurement of viscous fluid flow through concentric orifice plate and quarter- ircle orifice plate
CSN 65 6282-1986 Hydraulic oils and fluids. etermination of wear proper- ies (Vickers test)
CSN 62 1510-1978 Testing of vulcanized rubber. Determinatiou of the resistaace to liquids
CSN 62 1501-1973 Testing of vulcanized rubber. Determinatiou of the resistaace to liquids
CSN 13 4509 Cast.3-1985 Method for measuring of control valvea. Sizing cquations for compresaible fluids flow
CSN 64 0214-1975 Flowability determination of ermosetting molding materials y means of cup-test
CSN 03 8135-1984 Corrosion tests of metals in liquids and vapours
CSN 34 6432-1983 Test methods for determination of the electrical properties of insulating liquids
CSN 03 8135-1969 Corrosion tests of metals in liquids and vapours

RU-GOST R, Test fluidity

GOST 15528-1986 Instruments for measuring flowrate, volume or mass of flowing fluid and gas. Terms and definitions
GOST 23409.25-1978 Fluid self-hardening sand mixtures. Method for determination of mobility
GOST 8.586.5-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
GOST 31177-2003 Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
GOST R ISO 3724-2011 Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant
GOST 8.586.2-2005 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements

国家市场监督管理总局、中国国家标准化管理委员会, Test fluidity

GB/T 40244-2021 Chemicals—Liquid or solid identification—Fluidity test method
GB/T 38092-2019 Vitreous and porcelain enamels—Determination of fluidity behaviour—Fusion flow test
GB/T 14513.2-2019 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 2: Alternative test methods

Professional Standard - Aerospace, Test fluidity

QJ 1153-1987 Specification for steady-state flow measurement of liquid rocket motors
QJ 2159-1991 Specifications for vibration measurement of liquid rocket motor tests
QJ 2160-1991 Specification for dynamic volumetric liquid flow measurement and calibration devices
QJ 1794-1989 Uncertainty Estimation Method for Steady-state Flow Measurement of Liquid Rocket Engine

未注明发布机构, Test fluidity

DIN EN ISO 9038:2004 Test for sustained combustibility of liquids
BS ISO 6073:1997(1999) Petroleum products — Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems
BS EN ISO 4534:2010(2014) Vitreous and porcelain enamels — Determination of fluidity behaviour — Fusion flow test
DIN EN ISO 1133:2005 Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics
BS EN 463:1995(1999) Protective clothing — Protection against liquid chemicals — Test method : Determination of resistance to penetration by a jet of liquid (Jet test)
BS EN 369:1993(1999) Protective clothing — Protection against liquid chemicals — Test method : Resistance ofmaterials to permeation by liquids

YU-JUS, Test fluidity

JUS H.P5.010-1991 Testing of pesticides.Dusts. Determination of flowability
JUS B.H8.022-1981 Testing of petroleum products — Determination ofkinematic viscosity of transparent and opaque liquids andcalculation ofdynamic viscosity

(U.S.) Ford Automotive Standards, Test fluidity

FORD FLTM EU-BV 052-2-2000 DETERMINATION OF FLOW PROPERTIES OF EXTRUDED BODY FILLERS
FORD FLTM EU-BV 052-02-2000 DETERMINATION OF FLOW PROPERTIES OF EXTRUDED BODY FILLERS

NL-NEN, Test fluidity

NEN-ISO 9104:1994 Measurement of fluid flow in xlosed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)

SE-SIS, Test fluidity

SIS SS-ISO 4534:1984 Vitreous and porcelain enamels - Deter- mination of fluidity behaviour - Fusion f low test
SIS SMS 2957-1972 Vitreous enamels. Apparatus for testing with alkaline liquids
SIS SS 16 11 47-1983 Plastics - Determination of the melt flow rate of thermoplastics
SIS SS 13 75 30-1980 Concrete testing — Mortar for injection — Fluidity
SIS SS 13 75 30-1984 Concrete testing — Mortar for injection — Fluidity
SIS SS 13 71 23-1983 Concrete testing - Fresh concrete - Consistency - Flow table test

CU-NC, Test fluidity

NC 48-57-1988 Hydrology. Exploitation Hydrology in Internal Systems Determination of Flows Hydrometric Regulating Work Methods

API - American Petroleum Institute, Test fluidity

API TR 2577-2018 Performance of Full-bore Vortex Meters for Measurement of Liquid Flows (FIRST EDITION)

KR-KS, Test fluidity

KS K ISO 23232-2016 Textiles－Aqueous liquid repellency－Water/alcohol solution resistance test
KS C IEC 60068-2-60-2019 Environmental testing — Part 2-60: Tests —Test Ke: Flowing mixed gas corrosion test
KS M ISO 4404-1-2013(2023) Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids

Military Standard of the People's Republic of China-General Armament Department, Test fluidity

GJB 9359-2018 Liquid rocket engine test and detection methods
GJB 2898-1997 Liquid rocket engine ground test measurement methods

BR-ABNT, Test fluidity

ABNT NBR NM 334-2012 Non-destructive testing - Liquid penetrant - Detection of discontinuities
ABNT P-MB-408-1966

BE-NBN, Test fluidity

NBN-ISO 6358:1990 Fluidtechnik - Pneumatik - Pneumatikgerate mit Druckluft - Ermittlung der Durchflusskennwerte

Professional Standard - Petroleum, Test fluidity

SY/T 6282-1997 Analytical approach of fluid physical property for heavy-oil reservoirs-Measurements of porous flow rheological characterization for crude oil

国家食品药品监督管理局, Test fluidity

YY/T 1564-2017 Test method for in vitro pulsating flow performance of cardiovascular implant pulmonary artery valved conduits

国家能源局, Test fluidity

NB/T 42081-2016 All-vanadium redox flow battery single cell performance test method

International Electrotechnical Commission (IEC), Test fluidity

IEC 60068-2-60:2015 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test

Standard Association of Australia （SAA）, Test fluidity

IEC 60068-2-60:2015 RLV Environmental testing — Part 2-60: Tests — Test Ke: Flowing mixed gas corrosion test
AS 2360.7.1:2001 Measurement of fluid flow in closed conduits - Assessment of uncertainty in the calibration and use of flow measurement devices - Linear calibration relationships

GM Daewoo, Test fluidity

GMKOREA EDS-T-7726-2011

ESDU - Engineering Sciences Data Unit, Test fluidity

ESDU 85032-1985 EJECTORS AND JET PUMPS - DESIGN AND PERFORMANCE FOR INCOMPRESSIBLE LIQUID FLOW
ESDU 85032 A-2007 Ejectors and jet pumps. Design and performance for incompressible liquid flow.

American Society of Mechanical Engineers (ASME), Test fluidity

ASME MFC-5.3-2013 Measurement of Liquid Flow in Closed Conduits Using Doppler Ultrasonic Flowmeters

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Test fluidity

GB/T 14513.1-2017 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow

European Association of Aerospace Industries, Test fluidity

AECMA PREN 2672-1989 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Design of Rigid Lines Issue P 1

National Metrological Technical Specifications of the People's Republic of China, Test fluidity

JJF 2019-2022 Specification for temperature performance test of liquid constant temperature test equipment

Professional Standard - Medicine, Test fluidity

YY/T 0700-2008 Clothing for protection against contact with blood and body fluids.Determination of the resistance of protective clothing materials to penetration by blood and body fluids.Test method using synthetic blood

CEN - European Committee for Standardization, Test fluidity

EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1133:1999 Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Test fluidity

ASHRAE 184 ERTA-2017 Method of Test for Field Performance of Liquid-Chilling Systems
ASHRAE 184 ADD A-2018 Method of Test for Field Performance of Liquid-Chilling Systems
ASHRAE 184-2016 Method of Test for Field Performance of Liquid-Chilling Systems

CY-CYS, Test fluidity

CYS 145 Pt.6 Method 601-1984 CYPRUS STANDARD METHOD OF TESTING PLASTICS Part 6: Rheological Properties METHOD 601: DETERMINATION OF MELT PLOW RATE OF THERMOPLASTICS