How to test fluidity

How to test fluidity, Total:238 items.

In the international standard classification, How to test fluidity involves: Fluid power systems, Hydraulic fluids, Road vehicle systems, Acoustics and acoustic measurements, Surface treatment and coating, Rubber and plastics products, Pipeline components and pipelines, Plastics, Ergonomics, Corrosion of metals, Telecommunication terminal equipment, Vibrations, shock and vibration measurements, Radiation measurements, Lubricants, industrial oils and related products, Analytical chemistry, Cellular materials, Products of the chemical industry, Medical equipment, Rubber, Measurement of fluid flow, Telecommunication systems, Protective equipment, Construction materials, Veterinary medicine, Farming and forestry, Lubrication systems, Water quality, Electrical and electronic testing, Electricity. Magnetism. Electrical and magnetic measurements, Testing of metals, Soil quality. Pedology, Wastes.

Japanese Industrial Standards Committee (JISC), How to test fluidity

JIS B 8386:2000 Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics
JIS B 8386:2011 Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics
JIS B 8397-2:2001 Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability
JIS B 8390:2000 Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics
JIS B 8356-6:2011 Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 6: Filter elements -- Determination of resistance to flow fatigue using particulate contaminant
JIS B 8397-3:2001 Hydraulic fluid power -- Determination of characteristics of motors -- Part 3: At constant flow and at constant torque
JIS B 8350-1:2003 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps
JIS B 8384:2011 Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance
JIS B 8350-2:2003 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors
JIS B 8397-1:2001 Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and at constant pressure
JIS B 8356-8:2002 Hydraulic fluid power filters -- Multi-pass method for evaluating filtration performance of a filter element
JIS B 8672-1:2023 Pneumatic fluid power -- Assessment of component reliability by testing -- Part 1: General procedures
JIS B 8390-1:2016 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids -- Part 1: General rules and test methods for steady-state flow
JIS B 8672-2:2023 Pneumatic fluid power -- Assessment of component reliability by testing -- Part 2: Directional control valves
JIS B 8672-4:2023 Pneumatic fluid power -- Assessment of component reliability by testing -- Part 4: Pressure regulators
JIS B 2409:2002 Hydraulic fluid power -- Sealing devices -- Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
JIS B 8350-3:2003 Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array
JIS B 8371-2:2000 Pneumatic fluid power -- Compressed air filters -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature
JIS B 8372-3:2022 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators

International Organization for Standardization (ISO), How to test fluidity

ISO 23181:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using high viscosity fluid
ISO 4411:2008 Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics
ISO 17559:2003 Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics
ISO 4534:1980 Vitreous and porcelain enamels; Determination of fluidity behaviour; Fusion flow test
ISO 15086-3:2008 Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance
ISO 3724:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using particulate contaminant
ISO 18869:2017 Hydraulic fluid power — Test methods for couplings actuated with or without tools
ISO 10770-3:2020 Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves
ISO/PRF TR 16203:2023 Overview of methods available for particle-free erosion corrosion testing in flowing liquids
ISO/TR 16203:2023 Overview of methods available for particle-free erosion corrosion testing in flowing liquids
ISO 5352-1:2023 Hydraulic fluid power — Determination of discharge flow rate and thermal losses of gas loaded accumulators — Part 1: Test method
ISO 15086-3:2022 Hydraulic fluid power — Determination of the fluid-borne noise characteristics of components and systems — Part 3: Measurement of hydraulic impedance
ISO 6358-2:2019 Pneumatic fluid power — Determination of flow-rate characteristics of components using compressible fluids — Part 2: Alternative test methods
ISO/FDIS 5352-1 Hydraulic fluid power — Determination of discharge flow rate and thermal losses of gas loaded accumulators — Part 1: Test method
ISO 19361:2017 Measurement of radioactivity — Determination of beta emitters activities — Test method using liquid scintillation counting
ISO 15086-1:2001 Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 1: Introduction
ISO/TR 10771-2:2008 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 2: Rating methods
ISO 6358-2:2013 Pneumatic fluid power.Determination of flow-rate characteristics of components using compressible fluids.Part 2: Alternative test methods
ISO 6358-1:2013 Pneumatic fluid power.Determination of flow-rate characteristics of components using compressible fluids.Part 1: General rules and test methods for steady-state flow
ISO 4409:2007 Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
ISO 4409:2019 Hydraulic fluid power — Positive-displacement pumps, motors and integral transmissions — Methods of testing and presenting basic steady state performance

Association Francaise de Normalisation, How to test fluidity

NF E48-706*NF ISO 23181:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using high viscosity fluid
NF EN 17534:2022 Textiles - Effets physiologiques - Mesurage du transfert de sueur liquide et de l'effet tampon vis-à-vis de la sueur liquide
NF E48-032*NF ISO 10100:2020 Hydraulic fluid power - Cylinders - Acceptance tests
NF E48-690:1990 Hydraulic fluid power. Fluids. Measurement of filtrability of mineral oils.
NF E48-692:1997 Hydraulic fluid power. Fluids. Measurement of filtrability of HFC and HFD class fire resistant fluids.
FD E48-154:2002 Hydraulic fluid power - Test method for determinating the flowrate performances of hydro-pneumatic accumulators
NF ISO 4392-2:2002 Transmissions hydrauliques - Détermination des caractéristiques des moteurs - Partie 2 : essai de démarrage
NF E48-415:2008 Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics.
NF E48-691:1995 Hydraulic fluid power. Fluids. Measurement of filtrability of minerals oils in the presence of water.
NF E48-382*NF ISO 4392-2:2002 Hydraulic fluid power - Determination of characteristics of motors - Part 2 : startability
NF E48-673:1989 Hydraulic fluid power. Filter elements. Methods for checking the compatibility of materials with fluids.
NF E48-392-3*NF ISO 15086-3:2009 Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 3 : measurement of hydraulic impedance
NF ISO 15086-3:2022 Transmissions hydrauliques - Évaluation des caractéristiques du bruit liquidien des composants et systèmes - Partie 3 : mesurage de l'impédance hydraulique
NF E48-392-2*NF ISO 15086-2:2001 Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 2 : measurement of the speed of sound in a fluid in a pipe
NF ISO 4392-1:2002 Transmissions hydrauliques - Détermination des caractéristiques des moteurs - Partie 1 : essai à pression constante et basse vitesse constante
NF ISO 6358-2:2020 Transmissions pneumatiques - Détermination des caractéristiques de débit des composants traversés par un fluide compressible - Partie 2 : méthodes d'essai alternatives
NF E49-160-2*NF ISO 6358-2:2020 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 2 : alternative test methods
NF E48-383:1989 Hydraulic fluid power. Motors. Determination of performances characteristics at constant flow and constant torque.
NF ISO 3724:2007 Transmissions hydrauliques - Éléments filtrants - Détermination de la résistance à la fatigue due au débit en utilisant un contaminant particulaire
NF E49-160-2:2013 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 2: alternative test methods
NF E48-380*NF ISO 4409:2019 Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
NF E48-380:1990 Hydraulic fluid power. Positive displacement pumps, motors and integral transmissions. Determination of steady-state performance.
NF E48-380:2007 Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance.
NF E48-392-1*NF ISO 15086-1:2002 Hydraulic fluid power - Determination of the fluid-borne noise characteristics of components and systems - Part 1 : introduction
NF ISO 15086-2:2001 Transmissions hydrauliques - Évaluation des caractéristiques du bruit liquidien des composants et systèmes - Partie 2 : mesurage de la vitesse du son émis dans un fluide dans une tuyauterie
P15-437:1987 Hydraulic binders. Testing technics. Characterization of cements by fluidity measurement under mortar vibration.
NF E49-160-1*NF ISO 6358-1:2013 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1: general rules and test methods for steady-state flow
NF E48-381*NF ISO 4392-1:2002 Hydraulic fluid power - Determination of characteristics of motors - Part 1 : at constant low speed and constant pressure
NF E49-300:2000 Pneumatic fluid power - Method of characterization of air debit coefficients by drains reservoir.
NF E49-160-1/A1*NF ISO 6358-1/A1:2020 Pneumatic fluid power - Determination of flow-rate characteristics of components using compressible fluids - Part 1 : general rules and test methods for steady-state flow - Amendment 1 : effective conductance
NF EN ISO 10414-1:2010 Industries du pétrole et du gaz naturel - Essais in situ des fluides de forage - Partie 1 : fluides aqueux
NF ISO 6358-1:2013 Transmissions pneumatiques - Détermination des caractéristiques de débit des composants traversés par un fluide compressible - Partie 1 : règles générales et méthodes d'essai en régime stationnaire
NF E48-610-1:2004 Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials - Part 1 : formulation and preparation of test elastomers.
NF E48-610-2:2004 Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials - Part 2 : test methods.
NF ISO 4392-3:2005 Transmissions hydrauliques - Détermination des caractéristiques des moteurs - Partie 3 : essai à débit constant et couple constant
NF ISO 16902-1:2004 Transmissions hydrauliques - Code d'essai pour la détermination des niveaux de puissance acoustique à l'aide des techniques d'intensimétrie : méthode d'expertise - Partie 1 : pompes
NF EN 1048:2014 Échangeurs thermiques - Refroidisseurs de liquide à convection forcée ('aéroréfrigérant sec') - Procédures d'essai pour la détermination de la performance
NF ISO 6953-3:2012 Transmissions pneumatiques - Régulateurs de pression et filtre-régulateurs pour air comprimé - Partie 3 : méthodes d'essai alternatives pour mesurer les caractéristiques de débit des réducteurs de pression
NF ISO 4412-3:1992 Transmissions hydrauliques - Code d'essai pour la détermination du niveau de bruit aérien - Partie 3 : pompes - Méthode employant un étalage des microphones en parallélépipède.
NF U47-016:2002 Animal health analysis methods - Detection of antibodies against equine influenza by the complement fixation test.
NF ISO 10041-2:2010 Transmissions pneumatiques - Distributeurs électropneumatiques à commande continue de débit - Partie 2 : méthodes d'essai pour déterminer les principales caractéristiques à inclure dans la documentation du fournisseur
NF E49-088-2*NF ISO 10094-2:2022 Pneumatic fluid power - Electro-pneumatic pressure control valves - Part 2 : test methods to determine main characteristics to include in the supplier's literature
NF ISO 6358-1/A1:2020 Transmissions pneumatiques - Détermination des caractéristiques de débit des composants traversés par un fluide compressible - Partie 1 : règles générales et méthodes d'essai en régime stationnaire - Amendement 1 : conductance effective
NF ISO 5782-2:1998 Transmissions pneumatiques - Filtres pour air comprimé - Partie 2 : méthodes d'essai pour déterminer les principales caractéristiques à inclure dans la documentation des fournisseurs.
NF A49-875-2:2000 Non-destructive testing of steel tubes - Part 2 : automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightness.
NF ISO 10094-2:2022 Transmissions pneumatiques - Appareils électropneumatiques de distribution à commande continue de pression - Partie 2 : méthodes d'essai pour déterminer les principales caractéristiques à inclure dans la documentation des fournisseurs
NF E49-320-2:1998 Pneumatic fluid power. Compressed air lubricators. Part 2 : test methods to determine the main characteristics to be included in supplier's literature.
NF E49-320-2*NF ISO 6301-2:2019 Pneumatic fluid power - Compressed-air lubricators - Part 2 : test methods to determine the main characteristics to be included in supplier's literature
NF E49-310-2*NF ISO 5782-2:1998 Pneumatic fluid power. Compressed air filters. Part 2 : test methods to determine the main characteristics to be included in supplier's literature.
NF EN 14825:2022 Climatiseurs, groupes refroidisseurs de liquide et pompes à chaleur avec compresseur entraîné par moteur électrique pour le chauffage et le refroidissement des locaux, le froid commercial et industriel - Essais et détermination des caractéristiqu...
NF E49-330-3*NF ISO 6953-3:2012 Pneumatic fluid power - Compressed air pressure regulators and filter-regulators -Part 3 : alternative test methods for measuring the flow-rate characteristics of pressure regulators.

British Standards Institution (BSI), How to test fluidity

BS ISO 23181:2007 Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using high viscosity fluid
BS ISO 10100:2020 Hydraulic fluid power. Cylinders. Acceptance tests
BS ISO 4392-2:2002 Hydraulic fluid power - Determination of characteristics of motors - Startability
BS ISO 17559:2003 Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics
BS ISO 4411:2008 Hydraulic fluid power - Valves - Determination of pressure differential/flow characteristics
BS ISO 4411:2019 Hydraulic fluid power. Valves. Determination of differential pressure/flow rate characteristics
BS ISO 15086-2:2000 Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Measurement of speed of sound in a fluid in a pipe
19/30375041 DC BS ISO 10100. Hydraulic fluid power. Cylinders. Acceptance tests
BS ISO 15086-3:2022 Hydraulic fluid power. Determination of the fluid-borne noise characteristics of components and systems - Measurement of hydraulic impedance
BS ISO 15086-1:2001 Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Hydraulic fluid power - Determination of the fluid borne noise characteristics of components and systems - Introduction
BS ISO 5352-1:2023 Hydraulic fluid power. Determination of discharge flow rate and thermal losses of gas loaded accumulators - Test method
BS ISO 6605:2017 Hydraulic fluid power. Test methods for hoses and hose assemblies
BS ISO 6358-2:2019 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids - Alternative test methods
BS 7275-3:1995 Determination of hydraulic fluid power motor characteristics. Method at constant flow and at constant torque
BS ISO 10771-1:2015 Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Test method
BS ISO 4392-1:2002 Hydraulic fluid power - Determination of characteristics of motors - At constant low speed and constant pressure
BS ISO 6358-1:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. General rules and test methods for steady-state flow
BS ISO 6358-1:2013+A1:2020 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. General rules and test methods for steady-state flow
BS ISO 4409:2007 Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance
PD ISO/TR 16203:2023 Overview of methods available for particle-free erosion corrosion testing in flowing liquids
BS ISO 4409:2019 Hydraulic fluid power. Positive-displacement pumps, motors and integral transmissions. Methods of testing and presenting basic steady state performance
BS ISO 18869:2017 Hydraulic fluid power. Test methods for couplings actuated with or without tools
PD ISO/TR 4808:2021 Hydraulic fluid power. Interpolation method for particle count and filter test data
BS PD ISO/TR 4808:2021 Hydraulic fluid power. Interpolation method for particle count and filter test data
PD ISO/TR 10771-2:2008 Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Rating method
19/30378151 DC BS ISO 6358-1 AMD1. Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Part 1. General rules and test methods for steady-state flow
20/30423408 DC BS ISO 15086-3. Hydraulic fluid power. Determination of the fluid-borne noise characteristics of components and systems. Part 3. Measurement of hydraulic impedance
BS EN ISO 4263-2:2003 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Procedure for category HFC hydraulic fluids
BS ISO 6358-2:2013 Pneumatic fluid power. Determination of flow-rate characteristics of components using compressible fluids. Alternative test methods
PD ISO/TR 16194:2017 Pneumatic fluid power. Assessment of component reliability by accelerated life testing. General guidelines and procedures
BS PD ISO/TR 4813:2021 Hydraulic fluid power. Background, impact and use of ISO 11171:2020 on particle count and filter test data
PD ISO/TR 4813:2021 Hydraulic fluid power. Background, impact and use of ISO 11171:2020 on particle count and filter test data
BS EN 12706:2000 Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determinatiion of flow characteristics
BS ISO 6301-2:1997 Pneumatic fluid power - Compressed air lubricators - Test methods to determine the main characteristics to be included in supplier's literature
BS ISO 6301-2:1998 Pneumatic fluid power. Compressed air lubricators. Test methods to determine the main characteristics to be included in supplier's literature
BS ISO 5782-2:1998 Pnuematic fluid power - Compressed air filters - Test methods to determine the main characteristics to be included in supplier's literature
PD ISO/TR 22681:2019 Hydraulic fluid power. Impact and use of ISO 11171:2016 µm(b) and µm(c) particle size designations on particle count and filter test data
19/30376933 DC BS ISO 4548-5. Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 5. Test for cold start simulation and hydraulic pulse durability
BS IEC 61747-40-5:2018 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Strength against dynamic impact by a sharp object with the specimen rigidly supported

Korean Agency for Technology and Standards (KATS), How to test fluidity

KS B ISO 23181:2009 Hydraulic fluid power－Filter elements－Determination of resistance to flow fatigue using high viscosity fluid
KS B ISO 17559:2005 Hydraulic fluid power-Electrically controlled hydraulic pumps-Test methods to determine performance characteristics
KS B ISO 17559:2013 Hydraulic fluid power－Electrically controlled hydraulic pumps－Test methods to determine performance characteristics
KS B ISO 23181-2009(2019) Hydraulic fluid power－Filter elements－Determination of resistance to flow fatigue using high viscosity fluid
KS M 3070-2013 Testing method for melt flow rate of thermoplastics
KS B ISO 15086-2-2006(2011) Hydraulic fluid power－Determination of fluid-borne noise characteristics of components and systems－Part 2：Measurement of speed of sound in a fluid in a pipe
KS B ISO 15086-1-2006(2011) Hydraulic fluid power－Determination of fluid-borne noise characteristics of components and systems－Part 1：Introduction
KS B ISO 15086-2:2006 Hydraulic fluid power-Determination of fluid-borne noise characteristics of components and systems-Part 2:Measurement of speed of sound in a fluid in a pipe

RO-ASRO, How to test fluidity

STAS SR ISO 10100:1996 Hydraulic fluid power - Cylinders - Acceptance test
STAS 7347/3-1983 D etermination of fluid flow in pressure pipe systems METHOD BY KEDUCTING THE FLOW SECTION MEASUREMENT BY VENT.URI TUBES ANU NOZZLES
STAS 7347/1-1983 Measurement of fluid flow in pressure pipe systems METHOD BY THROTTLING THE FLOW SEGTION. MEASUREMENT BYORIFICEPLATESAND NOZZLES

American Society for Testing and Materials (ASTM), How to test fluidity

ASTM D6351-22 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D6351-10 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D6351-10(2016) Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D8534-23 Standard Test Method for Determination of Trace Peroxides in Liquid, Liquefied, and Reagents Soluble Hydrocarbon Streams using Flow Injection System with Ultraviolet/Visible Detector
ASTM D6351-99 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D6351-99(2005) Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids
ASTM D8385-22 Standard Test Method for Dry Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique
ASTM D8277-20 Standard Test Method for Wet Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique
ASTM D5154-91 Standard Test Method for Determining the Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D7605-11 Standard Test Method for Thermoplastic ElastomersMeasurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D4898-23 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D4440-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology
ASTM D4440-08 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
ASTM D7605-11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D7605-11(2022) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D6546-23 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications
ASTM D1238-20 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-23 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-23a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D7605-10 Standard Test Method for Thermoplastic Elastomersx2014;Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM E1294-89(1999) Standard Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter
ASTM D1238-13 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-10 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM C1745/C1745M-18 Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
ASTM D7896-14 Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
ASTM C1310-95(2001) Standard Test Method for Determining Radionuclides in Soils by Inductively Coupled Plasma-Mass Spectrometry Using Flow Injection Preconcentration

AENOR, How to test fluidity

UNE 101400:1993 HYDRAULIC FLUID POWER. HOSE ASSEMBLIES. METHOD OF TEST.
UNE-EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
UNE 26325:1989 ROAD VEHICLES. HYDRAULIC BRAKES. LIQUIDS WITJH PETROLEUM BASE FOR BRAKES AND CENTRALIZED CIRCUITS. HIGROSCOPICITY TEST.
UNE-EN ISO 17491-3:2009 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008)

Society of Automotive Engineers (SAE), How to test fluidity

SAE J1117-1986 Method of Measuring and Reporting the Pressure differential-Flow characteristics of a Hydraulic Fluid Power Valve
SAE J1117-2019 Method of Measuring and Reporting the Pressure differential-Flow characteristics of a Hydraulic Fluid Power Valve
SAE ARP1797-1991 AIRCRAFT AND AIRCRAFT ENGINE FUEL PUMP LOW LUBRICITY FLUID ENDURANCE TEST
SAE ARP1797A-2014 Aircraft and Aircraft Engine Fuel Pump Low Lubricity Fluid Endurance Test
SAE ARP5941-2020 Aerospace Fluid Power - Contamination Sensitivity - Considerations for Establishing Test Procedures for Flight Control Actuators

SAE - SAE International, How to test fluidity

SAE J1117-1975 Method of Measuring and Reporting the Pressure Differential-Flow Characteristics of a Hydraulic Fluid Power Valve
SAE J1117-1980 Method of Measuring and Reporting the Pressure Differential-Flow Characteristics of a Hydraulic Fluid Power Valve
SAE ARP6154-2017 Aerospace Fluid Power Electrohydrostatic Module@ Design@ Performance and Test Recommendations
SAE ARP1797-1983 Aircraft and Aircraft Engine Fuel Pump Low Lubricity Fluid Endurance Test
SAE ARP5941-2008 Aerospace Fluid Power - Contamination Sensitivity - Considerations for Establishing Test Procedures for Flight Control Actuators

German Institute for Standardization, How to test fluidity

DIN ISO 10100:2023-04 Hydraulic fluid power - Cylinders - Acceptance tests (ISO 10100:2020)
DIN ISO 10100:2023 Hydraulic fluid power - Cylinders - Acceptance tests (ISO 10100:2020)
DIN ISO 4534:1985 Vitreous and porcelain enamels; determination of fluidity behaviour; fusion flow test
DIN EN ISO 19879:2021-06 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021); German version EN ISO 19879:2021
DIN 65385:1991-12 Aerospace; hydraulic fluid power; filter elements; reporting of test data
DIN EN ISO 19879:2019 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO/DIS 19879:2019); German and English version prEN ISO 19879:2019
DIN 24550-6:1999-04 Fluid power - Hydraulic filters - Part 6: Test filter housings; dimensions
DIN 24339:2016-04 Hydraulic fluid power - Reservoirs made of steel, nominal sizes 63 to 2 000 - Dimensions, requirements, testing
DIN EN ISO 4534:2011 Vitreous and porcelain enamels - Determination of fluidity behaviour - Fusion flow test (ISO 4534:2010); German version EN ISO 4534:2010
DIN EN 12706:1999 Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics; German version EN 12706:1999
DIN VDE 0404-4:2005 Testing and measuring equipment for testing the electrical safety of electrical devices - Part 4: Handheld and manually operated current clamps/sensors for measurement of protectives conductor currents and touch currents of electrical devices

ES-AENOR, How to test fluidity

UNE 53-592-1988 Samples of elastomers for automotive hydraulic circuit brake fluid testing

ES-UNE, How to test fluidity

UNE-EN ISO 19879:2022 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
UNE-EN ISO 19361:2020 Measurement of radioactivity - Determination of beta emitters activities - Test method using liquid scintillation counting (ISO 19361:2017) (Endorsed by Asociación Española de Normalización in April of 2020.)

IT-UNI, How to test fluidity

UNI ISO 4409:2020 Hydraulic fluid power -- Positive-displacement pumps, motors and integral transmissions -- Methods of testing and presenting basic steady state performance
UNI ISO 6358-2:2020 Pneumatic fluid power -- Determination of flow-rate characteristics of components using compressible fluids - Part 2: Alternative test methods
UNI S 15-1941 Liquid fuel for engines. Determination of the anti-knock performance of aviation gasoline through tests on aviation engines
UNI EN ISO 18589-6:2021 Measurement of radioactivity in the environment - Soil - Part 6: Gross alpha and gross beta activities - Test method using gas-flow proportional counting

IN-BIS, How to test fluidity

IS 13614 Pt.2-1993 Hydraulic fluid power. Quick-action couplings. Part 2: Test methods
IS 12092-1987 Test methods for hose assemblies used in hydraulic fluid power systems

Lithuanian Standards Office , How to test fluidity

LST EN ISO 19879:2011 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010)
LST EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
LST ISO 7241-2:2003 Hydraulic fluid power. Quick-action couplings. Part 2: Test methods (idt ISO 7241-2:2000)
LST EN ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test) (ISO 17491-3:2008)
LST EN ISO 18589-6:2021 Measurement of radioactivity in the environment - Soil - Part 6: Gross alpha and gross beta activities - Test method using gas-flow proportional counting (ISO 18589-6:2019)

AT-ON, How to test fluidity

OENORM EN ISO 19879:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2021)
ONORM C 9515-1982 Testing of plastics; Determination of the Melt-Flow-Index of tbermoplastics
OENORM EN ISO 18589-6:2021 Measurement of radioactivity in the environment - Soil - Part 6: Gross alpha and gross beta activities - Test method using gas-flow proportional counting (ISO 18589-6:2019)

Danish Standards Foundation, How to test fluidity

DS/EN ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections (ISO 19879:2021)
DS/EN ISO 17491-3:2008 Protective clothing - Test methods for clothing providing protection against chemicals - Part 3: Determination of resistance to penetration by a jet of liquid (jet test)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), How to test fluidity

ASHRAE 4841-2006 The Effect of Elbows on the Accuracy of Liquid Flow Measurement with an Insertion Flowmeter

CZ-CSN, How to test fluidity

CSN 25 7712-1995 Measurement of fluid flow in closed conduits. Measurement of viscous fluid flow through concentric orifice plate and quarter- ircle orifice plate

Group Standards of the People's Republic of China, How to test fluidity

T/TAF 176-2023 User experience of smart terminal— Test method for fluency performance
T/CCSA 319-2021 User Experience of Smart Terminal-Technical Requirement and Test Methods for Fluency Performance

European Committee for Standardization (CEN), How to test fluidity

EN ISO 19361:2020 Measurement of radioactivity - Determination of beta emitters activities - Test method using liquid scintillation counting (ISO 19361:2017)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to test fluidity

GB/T 15357-2014 Surface active agents and detergents.Determination of viscosity and flow properties of liquid products using a rotational viscometer

国家食品药品监督管理局, How to test fluidity

YY/T 1564-2017 Test method for in vitro pulsating flow performance of cardiovascular implant pulmonary artery valved conduits

VDE - VDE Verlag GmbH@ Berlin@ Germany, How to test fluidity

VDE 0493-361-2018 Nachweis der Radioaktivitaet - Bestimmung der Aktivitaet von Betastrahlern - Verfahren mit Fluessigszintillationszaehlung (ISO 19361:2017)

国家市场监督管理总局、中国国家标准化管理委员会, How to test fluidity

GB/T 14513.2-2019 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 2: Alternative test methods

Standard Association of Australia （SAA）, How to test fluidity

AS 2360.7.1:2001 Measurement of fluid flow in closed conduits - Assessment of uncertainty in the calibration and use of flow measurement devices - Linear calibration relationships
ISO 19973-2:2015/Amd.1:2019 Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control valves AMENDMENT 1
AS 2360.1.5:2001 Measurement of fluid flow in closed conduits - Pressure differential methods - Measurement using orifice plates, nozzles or Venturi meters - Pulsating flow, in particular sinusoidal or square wave intermittent periodic-type fluctuations
ISO 9902-3:2001/Amd.1:2009 Textile machinery — Noise test code — Part 3: Nonwoven machinery AMENDMENT 1

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to test fluidity

GB/T 14513.1-2017 Pneumatic fluid power—Determination of flow-rate characteristics of components using compressible fluids—Part 1: General rules and test methods for steady-state flow
GB/T 3682.2-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture

YU-JUS, How to test fluidity

JUS B.H8.022-1981 Testing of petroleum products — Determination ofkinematic viscosity of transparent and opaque liquids andcalculation ofdynamic viscosity

CY-CYS, How to test fluidity

CYS 145 Pt.6 Method 601-1984 CYPRUS STANDARD METHOD OF TESTING PLASTICS Part 6: Rheological Properties METHOD 601: DETERMINATION OF MELT PLOW RATE OF THERMOPLASTICS

PT-IPQ, How to test fluidity

NP EN ISO 13479:2002 Polyolefin pipes for the conveyance of fluids Determination of resistance to crack propagation Test method for slow crack growth on notched pipes (notch test) (ISO 13479-1997)

GB-REG, How to test fluidity

REG NASA-LLIS-0763-2000 Lessons Learned - Systems Test Considerations for High Performance Liquid Propellant Rocket Engines

未注明发布机构, How to test fluidity

BS 5944-6:1992(2012) Measurement of airborne noise from hydraulic fluid power systems and components — Part 6 : Method of test for pumps using a parallelepiped microphone array
BS ISO 5782-2:1997(1999) Pneumatic fluid power — Compressed air filters — Part 2 : Test methods to determine the main characteristics to be included in supplier’s literature

VN-TCVN, How to test fluidity

TCVN 7433-2-2004 Thermoplastics pipes and fittings.Determination of melt mass-flow rate.Part 2: Test conditions
TCVN 7433-1-2004 Thermoplastics pipes and fittings.Determination of melt mass-flow rate.Part 1: Test method

API - American Petroleum Institute, How to test fluidity

API TR 13M-5-2018 Procedure for Testing and Evaluating the Performance of Friction (Drag) Reducers in Aqueous-based Fluid Flowing in Straight@ Smooth Circular Conduits (FIRST EDITION)

ZA-SANS, How to test fluidity

SANS 9854-1:1994 Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method Part 1: General test method
SANS 9854-2:1994 Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method Part 2: Test conditions for pipes of various materials

CH-SNV, How to test fluidity

SN EN ISO 18589-6:2021 Measurement of radioactivity in the environment - Soil - Part 6: Gross alpha and gross beta activities - Test method using gas-flow proportional counting (ISO 18589-6:2019)