ZH
RU
ES
Gear Wear Test
Gear Wear Test, Total:457 items.
In the international standard classification, Gear Wear Test involves: Vocabularies, Gears, Machine tool systems, Tyres, Cutting tools, Machine tools, Industrial automation systems, Products of the textile industry, Plastics, Hydraulic energy engineering, Testing of metals, Construction materials, Surface treatment and coating, Glass, Mechanical testing, Equipment for petroleum and natural gas industries, Non-ferrous metals, Linear and angular measurements, Dentistry, Rubber and plastics products, Wood, sawlogs and sawn timber, Graphic technology, Test conditions and procedures in general, Iron and steel products, Paints and varnishes, Road vehicles in general, Lubricants, industrial oils and related products, Analytical chemistry, Protection of and in buildings, Electrical wires and cables, Rubber, Paper products, Wood-based panels, Clothes, Footwear, Fuels, Equipment for the chemical industry, Products of the chemical industry, Power transmission and distribution networks, Shipbuilding and marine structures in general, Seals, glands, Ceramics, Elements of buildings, Pipeline components and pipelines, Road vehicle systems, Road engineering, Powder metallurgy, Miscellaneous domestic and commercial equipment, Wind turbine systems and other alternative sources of energy, Pumps, Electrical accessories, Materials for aerospace construction, Electrical and electronic testing, Medical equipment, Vibrations, shock and vibration measurements, Environmental testing, Hydraulic fluids, Raw materials for rubber and plastics, Cellular materials, Protection against fire, Conducting materials, Fluid power systems.
Korean Agency for Technology and Standards (KATS), Gear Wear Test
- KS B ISO 10825:2001 Gears-Wear and damage to gear teeth-Terminology
- KS B ISO 10825-2016(2021) Gears－Wear and damage to gear teeth－Terminology
- KS B ISO 10825:2016 Gears－Wear and damage to gear teeth－Terminology
- KS K ISO TR 4918:2008 Textile floor coverings－Determination of wear－Castor chair test
- KS B ISO 14104-2015(2020) Gears－Surface temper etch inspection after grinding
- KS D 8314-1-2011(2021) Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys－Part 1：Wheel wear test
- KS D 8314-1-2011(2016) Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys－Part 1：Wheel wear test
- KS B ISO 14104:2006 Gears-Surface temper etch inspection after grinding
- KS B ISO 14104:2015 Gears-Surface temper etch inspection after grinding
- KS D 8314-1-2011 Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys-Part 1:Wheel wear test
- KS P ISO TR 14569-1:2013 Dental materials－Guidance on testing of wear－Part 1：Wear by toothbrushing
- KS K 0607-2011 Test method for abrasion resistance of textile fabrics：Flexing and abrasion method
- KS F 2215-2020 Method of abrasion test for wood
- KS B ISO 14635-3:2009 Gears-FZG test procedures-Part 3:FZG test method A/2.8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
- KS K 0525-2010 Test method for abrasion resistance of textile fabrics-Uniform abrasion method
- KS K 0525-2015 Test method for abrasion resistance of textile fabrics－Uniform abrasion method
- KS K 0525-2021 Test method for abrasion resistance of textile fabrics — Uniform abrasion method
- KS D 0284-2005 Standard test method for abrasion resistance of pipeline coatings
- KS D 8335-2001 Methods of wear resistance test for metallic coatings
- KS D 8335-1986 Methods of wear resistance test for metallic coatings
- KS K 0607-2006 Test method for abrasion resistance of textile fabrics：Flexing and abrasion method
- KS K 0607-2017 Test method for abrasion resistance of textile fabrics：Flexing and abrasion method
- KS B ISO 6545:2013 Gear hobbing machines－Testing of the accuracy
- KS M 6689-2008 Testing methods for abrasion resistance of rubber vulcanized(Pico abrader)
- KS M 6689-1986 Testing methods for abrasion resistance of rubber vulcanized(Pico abrader)
- KS K 0607-2022 Test method for abrasion resistance of textile fabrics: Flexing and abrasion method
- KS M ISO 17693:2005 Footwear－Test methods for uppers－Resistance to damage on lasting
- KS F 2508-2007 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
- KS F 2508-2002 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
- KS F 2508-1982 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine
- KS B 6307-2005 Testing methods for gear pumps and screw pumps
- KS L 6513-2001 Testing methods for bonded abrasive grain size
- KS K ISO 12947-1:2008 Textiles-Determination of abrasion resistance of fabrics by the Martindale method-Part 1:Martindale abrasion testing apparatus
- KS K ISO 12947-1:2014 Textiles — Determination of abrasion resistance of fabrics by the Martindale method — Part 1: Martindale abrasion testing apparatus
KR-KS, Gear Wear Test
- KS B ISO 10825-2016 Gears－Wear and damage to gear teeth－Terminology
- KS B ISO 14635-3-2009 Gears－FZG test procedures－Part 3：FZG test method A/2.8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
- KS K ISO TR 4918-2008 Textile floor coverings－Determination of wear－Castor chair test
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gear Wear Test
- GB/T 3481-1997 Gears--Wear and damage to gear teeth--Terminology
- GB/T 12444.1-1990 Metallic materials--Wear tests MM mode wear test
- GB/T 12444.2-1990 Metallic materials--Wear tests Block-on-ring wear test
- GB/T 12444-2006 Metallic materials Wear test method Block on ring sliding wear test
- GB/T 31558-2015 5-axis simultaneous CNC spiral bevel gear grinding machines.Testing of the accuracy
- GB/T 12967.2-1991 Anodizing of aluminium and aluminium alloys--Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
- GB/T 17879-1999 Gears--Surface temper etch inspection after grinding
- GB/T 17879-2023 Chemical Etching Examination of Surface Tempering of Gears after Grinding
- GB/T 5478-1985 Test method for wear of plastics by rolling
- GB/T 5478-2008 Plastics-Test method for wear by rolling
- GB/T 3960-1983 Test method for friction and wear of plastics by sliding
- GB 3960-1983 Test method for friction and wear of plastics by sliding
- GB/T 11572-1989 Test methods of marine gearbox
- GB 11572-1989 Test methods of marine gearbox
- GB/T 6404.2-2005 Acceptance code for gear units.Part 2: Determination of mechanical vibrations of gear units during acceptance testing
- GB/T 14229-1993 Standard of test method for surface load capacity of gears
- GB/T 14230-1993 Standard of test methed for bending load capacity of gears
- GB/Z 13672-2022 Test method for scuffing load capacity of gears
- GB/T 13672-1992 Standard test method for scuffing load capacity of gears
- GB/T 12812-1991 Test method for tumbling friability of rigid cellular plastics
British Standards Institution (BSI), Gear Wear Test
- BS 7848:1996 Gears - Wear and damage to gear teeth - Terminology
- PD ISO/TR 10825-2:2022 Gears. Wear and damage to gear teeth. Supplementary information
- 21/30397472 DC BS ISO 10825-1. Gears. Wear and damage to gear teeth. Part 1. Terminology
- BS ISO 10825-1:2022 Gears - Wear and damage to gear teeth - Part 1: Nomenclature and characteristics
- BS ISO 14635-3:2006 Gears - FZG test procedures - FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
- BS ISO 14635-3:2023 Gears. FZG test procedures - FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
- BS ISO 14635-3:2005 Gears. FZG test procedures. FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
- BS ISO 24469:2023 Road wear test of studded tyres
- BS ISO/TR 13989-1:2001 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Flash temperature method
- BS ISO/TR 13989-2:2001 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears - Integral temperature method
- PD ISO/TS 6336-20:2022 Calculation of load capacity of spur and helical gears. Calculation of scuffing load capacity. Flash temperature method
- PD ISO/TR 10300-32:2021 Calculation of load capacity of bevel gears. ISO rating system for bevel and hypoid gears. Sample calculation for scuffing load capacity
- BS 7862:1996 Gears - Surface temper etch inspection after grinding
- BS ISO 14635-1:2023 Gears. FZG test procedures - FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
- BS EN 13892-5:2003 Methods of test for screed materials - Determination of wear resistance to rolling wheel of screed material for wearing layer
- PD ISO/TS 6336-21:2022 Calculation of load capacity of spur and helical gears. Part 21: Calculation of scuffing load capacity — Integral temperature method
- PD ISO/TS 10300-20:2021 Calculation of load capacity of bevel gears. Calculation of scuffing load capacity. Flash temperature method
- 21/30415517 DC BS ISO 24469. Road wear test of studded tyres
- BS ISO 14635-2:2023 Gears. FZG test procedures - FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
- BS ISO 14104:2014 Gears. Surface temper etch inspection after grinding, chemical method
- BS ISO 14104:2017 Gears. Surface temper etch inspection after grinding, chemical method
- BS ISO 14635-1:2000 Gears - FZG test procedures - FZG test method A/8, 3/90 for relative scruffing load-carrying capacity of oils
- BS 7676-2:1993 Acceptance code for gears. Determination of mechanical vibrations of gear units during acceptance testing
- BS ISO 6370-1:2011 Vitreous and porcelain enamels. Determination of the resistance to abrasion. Abrasion testing apparatus
- BS EN 12747:1999 Footwear - Test methods for insoles - Abrasion resistance
- BS EN 12770:2000 Footwear - Test methods for outsoles - Abrasion resistance
- BS EN 1071-6:2007 Advanced technical ceramics - Methods of test for ceramic coatings - Determination of the abrasion resistance of coatings by a micro-abrasion wear test
- BS EN ISO 105-X12:2002 Textiles - Tests for colour fastness - Colour fastness to rubbing
- BS ISO 28080:2011 Hardmetals. Abrasion tests for hardmetals
- BS EN ISO 105-X12:2016 Textiles. Tests for colour fastness. Colour fastness to rubbing
- BS EN 12697-16:2016 Tracked Changes. Bituminous mixtures. Test methods. Abrasion by studded tyres
- BS ISO 14242-1:2014 Implants for surgery. Wear of total hip-joint prostheses. Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
- BS ISO 14242-1:2002 Implants for surgery - Wear of total hip joint prostheses - Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
- BS EN 12274-5:2003 Slurry surfacing. Test methods. Determination of wearing
Association Francaise de Normalisation, Gear Wear Test
- NF E23-014*NF ISO 10825:2006 Gears - Wear and damage to gear teeth - Terminology
- NF E23-014:1994 Gears. ISO system of terminology. Terminology for the appearance of gear teeth : wear and damages.
- FD ISO/TR 10825-2:2022 Engrenages - Usure et défauts des dentures - Partie 2 : Informations supplémentaires
- NF ISO 10825-1:2022 Engrenages - Usure et défauts des dentures - Partie 1 : Nomenclature et caractéristiques
- XP E23-030-20*XP ISO/TS 6336-20:2018 Calculation of load capacity of spur and helical gears - Part 20 : calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Flash temperature method
- XP ISO/TS 6336-20:2022 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 20 : Calcul de la capacité de charge au grippage - Méthode de la température-éclair
- XP E23-030-21*XP ISO/TS 6336-21:2018 Calculation of load capacity of spur and helical gears - Part 21 : calculation of scuffing load capacity (also applicable to bevel and hypoid gears) - Integral temperature method
- NF P14-204-5*NF EN 13892-5:2004 Methods of test for screed materials - Part 5 : determination of wear resistance to rolling wheel of screed material for wearing layer
- NF P98-818-16*NF EN 12697-16:2017 Bituminous mixtures - Test methods - Part 16 : abrasion by studded tyres
- NF E23-034:2014 Gears - Surface temper etch inspection after grinding, chemical method
- NF T30-015:1991 Paints and varnishes. Abrasion resistance test.
- NF ISO 24469:2023 Essai d'usure des routes par des pneumatiques cloutés/cramponnés
- NF E60-401:1986 GRINDERS. GRINDING WHEEL GUARDS. STRENGTH TESTS.
- NF EN ISO 13427:2015 Géosynthétiques - Simulation de l'endommagement par abrasion (essai du bloc glissant)
- NF G62-115*NF EN ISO 17693:2005 Footwear - Test methods for uppers - Resistance to damage on lasting
- NF P98-818-16:2004 Bituminous mixtures - test methods for hot mix asphalt - Part 16 : abrasion by studded tyres.
- NF A95-189:2021 Hardmetals - Abrasion tests for hardmetals
- NF EN 12697-16:2017 Mélanges bitumineux - Méthodes d'essai - Partie 16 : abrasion par pneus à crampons
- XP S91-252-1*XP ISO/TS 14569-1:2002 Dental materials - Guidance on testing of wear resistance - Part 1 : wear by tooth brushing
- NF P98-857-7*NF EN 12274-7:2005 Slurry surfacing - Test methods - Part 7 : shaking abrasion test
- NF EN 1097-9:2014 Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 9 : détermination de la résistance à l'usure par abrasion provoquée par les pneus à crampons - Essai scandinave
- NF P18-650-9*NF EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9 : determination of the resistance to wear by abrasion from studded tyres - Nordic test
- NF G38-122*NF EN ISO 13427:2015 Geosynthetics - Abrasion damage simulation (sliding block test)
Japanese Industrial Standards Committee (JISC), Gear Wear Test
- JIS B 0160:1999 Gears -- Wear and damage to gear teeth -- Terminology
- JIS B 0160:2015 Gears -- Wear and damage to gear teeth -- Terminology
- JIS B 0160 ERRATUM 1:2000 Gears -- Wear and damage to gear teeth -- Terminology (Erratum 1)
- JIS H 8682-1:1999 Test methods for abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Wheel wear test
- JIS B 1756:2008 Gears -- Surface temper etch inspection after grinding
- JIS B 1756:2017 Gears -- Surface temper etch inspection after grinding, chemical method
- JIS K 6264:1993 Abrasion testing methods of vulcanized rubber
- JIS B 1758:2013 Acceptance tests for gear measuring instruments
- JIS A 1121:1993 Method of test for resistance to abrasion of coarse aggregates by use of the Los Angeles machine
- JIS A 1120:1976 Method of test for abrasion of coarse aggregate by use of the deval machine
- JIS B 1754:1998 Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing
- JIS B 8312:2022 Gear pumps and screw pumps -- Hydraulic performance acceptance tests
- JIS B 8312:2002 Gear pumps and screw pumps -- Hydraulic performance acceptance tests
International Organization for Standardization (ISO), Gear Wear Test
- ISO 10825:1995 Gears - Wear and damage to gear teeth - Terminology
- ISO/TR 10825-2:2022 Gears — Wear and damage to gear teeth — Part 2: Supplementary information
- ISO 10825-1:2022 Gears — Wear and damage to gear teeth — Part 1: Nomenclature and characteristics
- ISO 14635-3:2023 Gears — FZG test procedures — Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
- ISO/FDIS 14635-3 Gears — FZG test procedures — Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
- ISO 24469:2023 Road wear test of studded tyres
- ISO 14635-1:2023 Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
- ISO/TR 4918:1990 Textile floor coverings; determination of wear; castor chair test
- ISO/TR 10064-2:1996/cor 1:2001 Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash; Technical Corrigendum 1
- ISO/TR 10064-2:1996/cor 2:2006 Cylindrical gears - Code of inspection practice - Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash; Technical Corrigendum 2
- ISO/FDIS 14635-2 Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
- ISO 14635-2:2023 Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
- ISO 14104:1995 Gears - Surface temper etch inspection after grinding
- ISO/FDIS 14635-1 Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
- ISO/TR 14569-1:2007 Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing
- ISO 14635-3:2005 Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
- ISO 8579-2:1993 Acceptance code for gears; part 2: determination of mechanical vibrations of gear units during acceptance testing
- ISO 14104:2014 Gears - Surface temper etch inspection after grinding, chemical method
- ISO 14104:2017 Gears - Surface temper etch inspection after grinding, chemical method
- ISO 17693:2004 Footwear - Test methods for uppers - Resistance to damage on lasting
- ISO 20871:2001 Footwear - Test methods for outsoles - Abrasion resistance
- ISO 20868:2001 Footwear - Test methods for insoles - Abrasion resistance
- ISO 13427:2014 Geosynthetics - Abrasion damage simulation (sliding block test)
- ISO 28080:2011 Hardmetals - Abrasion tests for hardmetals
- ISO 28080:2021 Hardmetals - Abrasion tests for hardmetals
GM Europe, Gear Wear Test
- GME 6755-2008 Tire Wear Test
- GME GMI L-6X01-5-1998 Camshaft Wear Test (English/German; Includes Appendix 1-18; ITDC Release, Draft for Harmonization)
- GME L-6X01-4-1999
- GME6755-2008 Ermittlung des Reifenverschlei脽es Tire Wear Test English/German; This standard may be applied only for current projects incl. Global Epsilon e (37
American National Standards Institute （ANSI), Gear Wear Test
American Gear Manufacturers Association, Gear Wear Test
- AGMA 1010-F14-2014 Appearance of Gear Teeth - Terminology of Wear and Failure
- AGMA 96FTM10-1996 Scuffing Resistance of Vehicle Transmission Gears
- AGMA 90FTM8-1990 Investigations on the Scuffing Resistance of High-Speed Gears
- AGMA 05FTM09-2005 Hypoid Gear Lapping Wear Coefficient and Simulation
- AGMA 1010-E95-1995 Appearance of Gear Teeth - Terminology of Wear and Failure Revision of 110.04
- AGMA 98FTM8-1998 New Test Methods for the Evaluation of Wear, Scuffing and Pitting Capacity of Gear Lubricants
- AGMA 11FTM14-2011 AGMA 925-A03 Predicted Scuffing Risk to Spur and Helical Gears in Commercial Vehicle Transmissions
- AGMA 99FTM1-1999 Barkhausen Noise Inspection Method for Detecting Grinding Damage in Gears
- AGMA 05FTM13-2005 Evaluation of the Scuffing Resistance of Isotropic Superfinished Precision Gears
- AGMA 94FTM9-1994 Analytical and Experimental Vibration Analysis of a Damaged Gear
- AGMA 2007-C00-2000 Gears -- Surface Temper Etch Inspection After Grinding
- AGMA 01FTM7-2001 Chemically Accelerated Vibratory Finishing for the Elimination of Wear and Pitting of Alloy Steel Gears
- AGMA 11FTM28-2011 Simulation of Wear for High Contact Ratio Gear - A Mixed FE and Analytical Approach
- AGMA 14FTM14-2014 Theoretical and Experimental Study of the Frictional Losses of Radial Shaft Seals for Industrial Gearbox
- AGMA 946-A21-2021 Test Methods for Plastic Gears
AGMA - American Gear Manufacturers Association, Gear Wear Test
- 1010-F14-2014 Appearance of Gear Teeth - Terminology of Wear and Failure
- 1010-E95-1995 Appearance of Gear Teeth - Terminology of Wear and Failure
- 08FTM03-2008 Effects of Gear Surface Parameters on Flank Wear
- P219.16-1982 Calculation of Slow Speed Wear of Lubricated Gears
- 05FTM09-2005 Hypoid Gear Lapping Wear Coefficient and Simulation
- 11FTM14-2011 AGMA 925-A03 Predicted Scuffing Risk to Spur and Helical Gears in Commercial Vehicle Transmissions
- 98FTM8-1998 New Test Methods for the Evaluation of Wear@ Scuffing and Pitting Capacity of Gear Lubricants
- 99FTM1-1999 Barkhausen Noise Inspection Method for Detecting Grinding Damage in Gears
- 94FTM9-1994 Analytical and Experimental Vibration Analysis of a Damaged Gear
- 01FTM7-2001 Chemically Accelerated Vibratory Finishing for the Elimination of Wear and Pitting of Alloy Steel Gears
- 11FTM28-2011 Simulation of Wear for High Contact Ratio Gear - A Mixed FE and Analytical Approach
- 14FTM14-2014 Theoretical and Experimental Study of the Frictional Losses of Radial Shaft Seals for Industrial Gearbox
- 2116-A05-2005 Evaluation of Double Flank Testers for Radial Composite Measurement of Gears
- 09FTM07-2009 Optimizing Gear Geometry for Minimum Transmission Error@ Mesh Friction Losses and Scuffing Risk Through Computer Aided Engineering
- P84FTM1-1984 Analytical and Experimental Tooth Strength Study of Spur Planet Gears with Integral Bearings
Professional Standard - Petrochemical Industry, Gear Wear Test
Professional Standard - Machinery, Gear Wear Test
- JB/T 3954.1-1999 Spiral bevel gear grinder Accuracy inspection
- JB/T 7705-1995 Abrasion test method for loose abrasive grains Rubber wheel method
- JB/T 3989.3-2014 Involute cylindrical gear grinding machines.Part 3: Gear grinders with forming grinding wheel-Testing of the accuracy
- JB/T 3989.4-2017 Involute cylindrical gear grinding machines.Part 4: Gear grinders with cone-shaped grinding wheels.Testing of the accuracy
- JB/T 3989.5-2014 Involute cylindrical gear grinding machines.Parts 5: Gear grinders with flat-faced grinding wheel.Testing of the accuracy
- JB/T 6198.2-2007 Cycloidai gear grinding machines.Part 2: Testing of the accuracy
- JB/T 3993-1999 Gear grinding machine with worm wheel Accuracy inspection
- JB/T 3990-1999 Gear grinding machine with form wheel Accuracy inspection
- JB/T 3991-1999 Gear grinding machine with taper wheel Accuracy inspection
- JB/T 3988-1999 Accuracy Inspection of Butterfly Grinding Wheel Gear Grinding Machine
- JB/T 3992-1999 Gear grinding machine with big flat-faced wheel Accuracy inspection
- JB/T 7506-1994 Solid abrasive grain abrasion test. Pin-sand paper disc sliding abrasion method
- JB/T 12402.1-2015 CNC slide-type spiral bevel gear grinding machines.Part 1: Testing of the accuracy
- JB/T 7042-1993 Test methods for hydraulic gear pumps
- JB/T 9396-1999 The compensating exfension wires for tungsten - rhenium thermocouples
- JB/T 9396-2013 Ring-block wear testing machines.Technical specification
- JB/T 11446-2013 Gear hobs length of life test method
- JB/T 5077-1991 Universal gear device Method for type test
AENOR, Gear Wear Test
German Institute for Standardization, Gear Wear Test
- DIN ISO 14635-3:2011-08 Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005)
- DIN 53754:1977 Testing of plastics; determination of abrasion, abrasive disk method
- DIN 51191:2015-01 Vitreous and porcelain enamels - Sliding friction wear test using an abrasion wheel
- DIN 3991-4:1988-09 Calculation of load capacity of bevel gears without pinion offset; calculation of scuffing load capacity
- DIN 52347:1987 Testing of glass and plastics; abrasion test; method using abrasion wheels and measurement of scattered light
- DIN 3990-4:1987-12 Calculation of load capacity of cylindrical gears; calculation of scuffing load capacity
- DIN 52108:2010-05 Testing of inorganic non-metallic materials - Wear test using the grinding wheel according to Böhme - Grinding wheel method
- DIN 51191:2015 Vitreous and porcelain enamels - Sliding friction wear test using an abrasion wheel
- DIN 3991-4:1988 Calculation of load capacity of bevel gears without pinion offset; calculation of scuffing load capacity
- DIN EN 12373-9:1999 Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus; German version EN 12373-9:1998
- DIN EN 13892-5:2003 Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed materials for wearing layer; German version EN 13892-5:2003
- DIN 52108:2007 Testing of inorganic non-metallic materials - Wear test using the grinding wheel according to B?hme - Grinding wheel method
- DIN 52108:2010 Testing of inorganic non-metallic materials - Wear test using the grinding wheel according to Boehme - Grinding wheel method
- DIN 13973-1:2008 Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing (ISO/TR 14569-1:2007)
- DIN ISO 14635-1 Berichtigung 1:2007-03 Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000), Corrigenda to DIN ISO 14635-1:2006-05
- DIN EN 12697-16:2016-10 Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres; German version EN 12697-16:2016
- DIN 50315:2010 Testing of metallic abrasives by centrifugal blasting - Wear testing, efficiency testing
- DIN 52348:1985-02 Testing of glass and plastics; abraison test; sand trickling method
- DIN ISO 14635-3:2011 Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005)
- DIN 8978:1973 Wear test for refrigerant compressors
- DIN VDE 0472-605:1985 Testing of cables, insulated wires and flexible cords; abrasion
- DIN 54607:2014 Tissue paper and tissue products - Determination of dry colour abrasion of table decoration products - Abrasion test
- DIN EN ISO 13427:2015-03 Geosynthetics - Abrasion damage simulation (sliding block test) (ISO 13427:2014); German version EN ISO 13427:2014
- DIN EN 1097-9:2005 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test(includes Amendment A1:2005); English version of DIN EN 1097-9:1998 + A1:2005
- DIN ISO 14635-2:2010-01 Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils (ISO 14635-2:2004)
- DIN EN 4876:2021 Aerospace series - Environmental testing - Hand abrasion and fingerprint test on cabin touchscreen and pencil abrasion on signing touch pads; German and English version prEN 4876:2021
- DIN EN 12773:2000 Footwear - Test methods for outsoles - Needle tear strength; German version EN 12773:1999
- DIN ISO 14635-1 Berichtigung 1:2007 Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000), Corrigenda to DIN ISO 14635-1:2006-05
- DIN 13973-1:2001 Dental materials - Guidance on testing of wear resistance - Part 1: Wear by tooth brushing (ISO/TS 14569-1:1999)
- DIN EN 60068-2-70:1996 Environmental testing - Part 2: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands (IEC 60068-2-70:1995); German version EN 60068-2-70:1996
- DIN 53516:1987 Testing of rubber and elastomers; determination of abrasion resistance
- DIN EN 12274-7:2005-08 Slurry surfacing - Part 7: Shaking abrasion test; German version EN 12274-7:2005
- DIN 14811-3:1977 Fire hoses; abrasion test
- DIN 51165-1:2023-05 Vitreous and porcelain enamels - Determination of the resistance to hydroabrasion - Part 1: Hydroabrasion testing apparatus / Note: Date of issue 2023-04-21
工业和信息化部/国家能源局, Gear Wear Test
- JB/T 3989.6-2017 Involute cylindrical gear grinding machine Part 6: Accuracy inspection of worm grinding wheel gear grinding machine
- JB/T 3954.1-2017 Spiral bevel gear grinding machine Part 1: Accuracy inspection
- JB/T 13087.1-2017 CNC spiral bevel gear milling cutter disc sharpening machine Part 1: Accuracy inspection
水利部, Gear Wear Test
工业和信息化部, Gear Wear Test
- JB/T 6198.2-2021 Cycloidal Gear Grinding Machine Part 2: Accuracy Inspection
- JB/T 13626.1-2019 CNC worm grinding wheel-formed grinding wheel compound gear grinding machine Part 1: Accuracy inspection
- YB/T 4993-2022 Test methods for friction and wear properties of carbon materials
American Society for Testing and Materials (ASTM), Gear Wear Test
- ASTM G105-89(1997)e1 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
- ASTM G105-20 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
- ASTM G105-16 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
- ASTM G176-03 Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test8212;Cumulative Wear Method
- ASTM F1046-93(1997)e1 Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
- ASTM F1046-01(2015) Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
- ASTM G65-00 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
- ASTM G65-16e1 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
- ASTM G65-00e1 Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
- ASTM G65-16(2021) Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
- ASTM G176-03(2017) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
- ASTM G132-96 Standard Test Method for Pin Abrasion Testing
- ASTM G132-96(2001) Standard Test Method for Pin Abrasion Testing
- ASTM G132-96(2007) Standard Test Method for Pin Abrasion Testing
- ASTM G132-96(2018) Standard Test Method for Pin Abrasion Testing
- ASTM G137-97(2009) Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
- ASTM G176-03(2009) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test8212;Cumulative Wear Method
- ASTM G77-05 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
- ASTM G77-05e1 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
- ASTM G77-98 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
- ASTM D5181-91(1997)e1 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
- ASTM D5181-04 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
- ASTM D5181-09 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
- ASTM G77-05(2010) Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
- ASTM D5181-09(2017) Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
- ASTM G77-17(2022) Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
- ASTM D4966-12 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
- ASTM D4158-92 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
- ASTM D4158-01 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
- ASTM D4158-08(2016) Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
- ASTM E2905/E2905M-19 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
- ASTM E2905/E2905M-20 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods
- ASTM D4058-96(2020) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
- ASTM F1046-01 Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
- ASTM F1046-01(2008) Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
- ASTM F1046-21 Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
- ASTM D3885-99 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
- ASTM G99-05(2016) Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
- ASTM D3181-95(2002) Standard Guide for Conducting Wear Tests on Textiles
- ASTM D3181-95(2008) Standard Guide for Conducting Wear Tests on Textiles
- ASTM G98-02(2009) Standard Test Method for Galling Resistance of Materials
- ASTM D4685/D4685M-15(2020) Standard Test Method for Pile Fabric Abrasion
- ASTM D3181-15e1 Standard Guide for Conducting Wear Tests on Textiles
- ASTM G77-17 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
- ASTM D4213-96e1 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
- ASTM D4213-96(2003) Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
- ASTM D4213-08 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
- ASTM G206-17(2021)e1 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
- ASTM D2228-02 Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method
- ASTM D3885-04 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
- ASTM E405-89(1996)e1 Standard Test Methods for Wear Testing Rotary Operators for Windows
- ASTM E405-04 Standard Test Methods for Wear Testing Rotary Operators for Windows
- ASTM G99-95a(2000)e1 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
- ASTM G9-87(1998) Standard Test Method for Water Penetration into Pipeline Coatings
- ASTM G99-05(2010) Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
- ASTM E405-04(2012) Standard Test Methods for Wear Testing Rotary Operators for Windows
- ASTM G99-17 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
- ASTM G83-96 Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus
- ASTM D4966-22 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
- ASTM D4966-12e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
- ASTM G98-91(1996)e1 Standard Test Method for Galling Resistance of Materials
- ASTM D4685-07 Standard Test Method for Pile Fabric Abrasion
- ASTM G98-02 Standard Test Method for Galling Resistance of Materials
- ASTM G98-17(2022) Standard Test Method for Galling Resistance of Materials
- ASTM G206-11 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
- ASTM G195-18 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
- ASTM D3885-07a Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
- ASTM D3885-07a(2011) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
- ASTM D3885-07a(2019) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
- ASTM G195-13a Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
- ASTM D3885-07A(2019)e1 Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
- ASTM D3885-07a(2015) Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
- ASTM G81-97a Standard Test Method for Jaw Crusher Gouging Abrasion Test
- ASTM G81-97a(2007) Standard Test Method for Jaw Crusher Gouging Abrasion Test
- ASTM G81-97a(2002)e1 Standard Test Method for Jaw Crusher Gouging Abrasion Test
- ASTM D2-33(1968) Method of Test for Abrasion of Rock by Use of the Deval Machine
- ASTM G81-97a(2013) Standard Test Method for Jaw Crusher Gouging Abrasion Test
- ASTM G81-97a(2018) Standard Test Method for Jaw Crusher Gouging Abrasion Test
- ASTM D2714-94(2003) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
- ASTM D2714-94(2009) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine
- ASTM D6973-05 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM D6973-08e1 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM D6973-14 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
- ASTM F2497-05 Standard Practice for Abrasion and Scuff Resistance of Inkjet Media by the Sutherland Rub Tester
- ASTM D1508-99 Standard Test Method for Carbon Black, Pelleted-Fines and Attrition
- ASTM G190-06 Standard Guide for Developing and Selecting Wear Tests
- ASTM G196-08 Standard Test Method for Galling Resistance of Material Couples
- ASTM G190-15 Standard Guide for Developing and Selecting Wear Tests
- ASTM D1508-12(2017) Standard Test Method for Carbon Black, Pelleted Fines and Attrition
- ASTM D3181-15(2019) Standard Guide for Conducting Wear Tests on Textiles
- ASTM C1353-07 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
- ASTM C1353-98(2006) Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
European Committee for Standardization (CEN), Gear Wear Test
- EN 1097-9:2014 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
- EN 13892-5:2003 Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer
- EN ISO 28080:2021 Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021)
AT-ON, Gear Wear Test
- ONORM M 6746-1995 Calculation of frictional wear load capacity of slow running cylindrical gears
- ONORM B 3126 Teil.1-1986 Testing of natural stone and of anorganic building materials; wear testing; grinding wheel test-method according to BAUSCHINGER
- ONORM B 3126 Teil.2-1986 Testing of natural stone and of anorganic building materials; wear test; grinding wheel test method according to B?HME
- ONORM B 5214-1991 Organic floor coverings; determination of the wearing process; chair castor test
- ONORM S 1413 Teil.2-1989 Textile jloor coverings; determination of the wearing process; drum test, fraying behaviour of pile carpets
- ONORM M 6720 TeiL.2-1990 Cylindrical gears and cylindrical gear drives with involute shaped tooth profile; terms, definitions and destinating dimensions; test measures for the tooth thickness
ZA-SANS, Gear Wear Test
- SANS 4918:1990 Textile floor coverings - Determination of wear - Castor chair test
PL-PKN, Gear Wear Test
GM North America, Gear Wear Test
Danish Standards Foundation, Gear Wear Test
- DS/ISO/TR 10300-32:2021 Calculation of load capacity of bevel gears – Part 32: ISO rating system for bevel and hypoid gears – Sample calculation for scuffing load capacity
- DS/ISO 28080:2021 Hardmetals – Abrasion tests for hardmetals
- DS/EN 12274-7:2006 Slurry surfacing - Test methods - Part 7: Shaking abrasion test
BE-NBN, Gear Wear Test
Society of Automotive Engineers (SAE), Gear Wear Test
SAE - SAE International, Gear Wear Test
RU-GOST R, Gear Wear Test
- GOST 17367-1971 Metalls. Method of abrasion test by friction against embedded abragant grain
- GOST R 55545-2013 Dental materials. Testing methods of wear. Part 1. Wear by toothbrushing
- GOST 23.207-1979 Ensuring of wear resistance of products. Testing of engineering materials for impact abrasive wear
SE-SIS, Gear Wear Test
IT-UNI, Gear Wear Test
Taiwan Provincial Standard of the People's Republic of China, Gear Wear Test
- CNS 14791-2003 Method of test for degradation of fine aggregate due to attrition
- CNS 12214-1988 Method of Test for Performance of Gear Lubricants in Axles Under High Speed and Shock Loading
- CNS 490-1993 Method of Test for Resistance to Abrasion of Small Size Coarse Aggregates by Use of the Los Angeles Machine
- CNS 11320-2000 Method of Test for Abrasion Resistance of Stone Subjected to Foot Traffic
- CNS 14278-1998 Method of test for abrasion resistance of geotextiles (Sand paper/sliding block method)
- CNS 12213-1988 Method of Test for Performance of Gear Lugricants in Axles at High Speed, Low Torque, Followed by Low Speed, High Torque
- CNS 3408-1985 Method of Test for Resistance to Abrasion of Large Size Coarse Aggregate by Use of the Los Angeles machine
- CNS 12212-1988 Method of Test for Thermal Oxidation Stability of Gear Lubricants
- CNS 7965-1995 Method of Test for Electric Bench Grinders
(U.S.) Ford Automotive Standards, Gear Wear Test
国家能源局, Gear Wear Test
VN-TCVN, Gear Wear Test
- TCVN 7695-3-2007 Gears.FZG test procedures.Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
- TCVN 7676-2-2007 Acceptance code for gears.Part 2: Determination of mechanical vibrations of gear units during acceptance testing
International Federation of Trucks and Engines, Gear Wear Test
API - American Petroleum Institute, Gear Wear Test
YU-JUS, Gear Wear Test
Canadian General Standards Board （CGSB), Gear Wear Test
Group Standards of the People's Republic of China, Gear Wear Test
- T/CFA 010604.6-2018 Test method on three body abrasion of metallic materials
- T/CFA 010604-3-2016 Test method on impact abrasion of steel and iron materials
- T/CSTM 00646.1-2021 Ｍetal materials－Friction and wear testing with a pin-on-disk apparatus － Part 1: Friction and wear testing at ambient temperature
- T/CSTM 00646.2-2021 Metal materials_—Friction and wear testing with a pin-on-disk apparatus — Part 2: Friction and wear testing at high-temperature
- T/CFA 010604.05-2017 Test method on impact corrosion-abrasion of steel and iron materials
International Truck and Engine Corporation (ITEC), Gear Wear Test
ES-AENOR, Gear Wear Test
BR-ABNT, Gear Wear Test
IN-BIS, Gear Wear Test
Military Standard of the People's Republic of China-General Armament Department, Gear Wear Test
GM Daewoo, Gear Wear Test
JSAE - Society of Automotive Engineers of Japan@ Inc., Gear Wear Test
- JASO C717-1991 Bench Test Procedures of Rack and Pinion Type Manual Steering
- JASO C715-1988 Bench Test Procedures of Steering Ball Joint for Rack and Pinion Type
- JASO M354-1999 Automobile diesel engine oils - Valve train wear test
- JASO M354-2006 Automobile diesel engine oils - Valve train wear test
National Metrological Verification Regulations of the People's Republic of China, Gear Wear Test
Standard Association of Australia （SAA）, Gear Wear Test
- AS/NZS 4266.20:2004 Reconstituted wood-based panels - Methods of test - Resistance to surface abrasion (Taber abrasion test)
RO-ASRO, Gear Wear Test
GOSTR, Gear Wear Test
- GOST 34342-2017 Motor vehicles. Pneumatic winter tyres, fitted with antiskid studs. Test methods for determination of the value of test pavement wear
Professional Standard - Light Industry, Gear Wear Test
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Gear Wear Test
National Metrological Technical Specifications of the People's Republic of China, Gear Wear Test
Professional Standard - Electricity, Gear Wear Test
Professional Standard - Chemical Industry, Gear Wear Test
- HG/T 3221-1987 Technical condition and test methods for glass-lined equipment
- HG/T 3221-2009 Viterous and porcelain enamels.Determination of the resistance to abrasion
Professional Standard - Non-ferrous Metal, Gear Wear Test
- YS/T 700-2009 Abrasion method of cathode blocks used in the production of aluminium
国家市场监督管理总局、中国国家标准化管理委员会, Gear Wear Test
Professional Standard-Ships, Gear Wear Test
Professional Standard - Coal, Gear Wear Test
Indonesia Standards, Gear Wear Test
- SNI ISO 12947-1:2010 Textile - Determination of the abrasion resistance of fabrics by the Martindale method Part 1 : Martindale abrasion testing apparatus
The American Road & Transportation Builders Association, Gear Wear Test
- AASHTO TP 108-2014 Standard Method of Test for Determining the Abrasion Loss of Asphalt Mixture Specimens
AASHTO - American Association of State Highway and Transportation Officials, Gear Wear Test
- TP 108-2014 Standard Method of Test for Determining the Abrasion Loss of Asphalt Mixture Specimens
未注明发布机构, Gear Wear Test
- BS ISO 14635-2:2004(2018) Gears — FZG test procedures Part 2 : FZG step load test A10 / 16,6R / 120 for relative scuffing load - carrying capacity of high EP oils
Professional Standard - Building Materials, Gear Wear Test
- JC/T 2102-2012 Wear test procedure on inertia dynamometer for brake friction materials
- JC 329-1982 Test method for abrasion of mosaic tiles and ceramic floor tiles
Professional Standard - Aerospace, Gear Wear Test
- QJ 1238.14-1987 Abrasion Test of Cable Test Method on Missile Launch Vehicle
Anhui Provincial Standard of the People's Republic of China, Gear Wear Test
- DB34/T 3220-2018 Test method for abrasion resistance of cleaning brushes of sanitation vehicles
Liaoning Provincial Standard of the People's Republic of China, Gear Wear Test
- DB21/T 2761-2017 High and low temperature test specification for wind power gearbox
CZ-CSN, Gear Wear Test
- CSN 63 1557-1985 Tyre testing. Tread depth measurement and tread wear indicator checking
- CSN 11 9288-1986 Unified system of industrial hydraulic components. Gear hydraulic generators and hydraulic gear motors. Testing method
Electronic Components, Assemblies and Materials Association, Gear Wear Test
- ECA 364-85-1996 TP-85 General Test Procedure for Assessing Wear and Mechanical Damage Testing of Contact Finishes for Electrical Connectors
Lithuanian Standards Office , Gear Wear Test
Professional Standard - Automobile, Gear Wear Test
- QC/T 642-2000 Test method for abrasion of flocked weather strips for vehicles
中国石油化工总公司, Gear Wear Test
- SH/T 0215-1992 Anti-rust grease deposition value and wear resistance test method