ZH

RU

ES

Commonly used for extraction

Commonly used for extraction, Total:418 items.

In the international standard classification, Commonly used for extraction involves: Plastics, Wastes, Sterilization and disinfection, Paint ingredients, Analytical chemistry, Products of the chemical industry, Pharmaceutics, Soil quality. Pedology, Rubber and plastics products, Home textiles. Linen, Cutting tools, Animal feeding stuffs, Fuels, Products of the textile industry, Chipless working equipment, Air quality, Raw materials for rubber and plastics, Tobacco, tobacco products and related equipment, Non-metalliferous minerals, Paper and board, Water quality, Surface treatment and coating, Coals, Leather technology, Organic chemicals, Environmental protection, Items of art and handicrafts, Bottles. Pots. Jars, Medical equipment, Powder metallurgy, Materials and articles in contact with foodstuffs, Packaging materials and accessories, Insulating materials, Pipeline components and pipelines, Insulating fluids, General methods of tests and analysis for food products, Laundry appliances, Floor treatment appliances, Hospital equipment, Crude petroleum, Test conditions and procedures in general, Pulps, Milk and milk products, Glass, Ceramics, Refractories, Acoustics and acoustic measurements, Cereals, pulses and derived products, Home economics in general, Fertilizers, Edible oils and fats. Oilseeds, Road engineering, External water conveyance systems, Installations in buildings, Fruits. Vegetables, Kitchen equipment, Linear and angular measurements, Inorganic chemicals, Nuclear energy engineering, Metalliferous minerals, Semiconducting materials, Farming and forestry, Burners. Boilers, Vocabularies.


European Committee for Standardization (CEN), Commonly used for extraction

  • EN ISO 6427:1998 Plastics - Determination of Matter Extractable by Organic Solvents (Conventional Methods) ISO 6427:1992
  • EN ISO 6427:2014 Plastics - Determination of matter extractable by organic solvents (conventional methods)
  • EN 16278:2012 Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE)
  • EN 14671:2006 Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride
  • EN 16693:2015 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • HD 381 S1-1979 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
  • EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
  • EN 16691:2015 Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • EN 16694:2015 Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS)
  • EN 14719:2005 Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction
  • EN ISO 3735:1999 Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735-1999)
  • EN ISO 14719:2011 Chemical analysis of refractory material glass and glazes - Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline (ISO 14719:2011)
  • EN 15598:2008 Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction
  • EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
  • EN ISO 9377-2:2000 Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography
  • FprCEN/TS 17743-2021 Foodstuff - Determination of pesticide residues by ethyl acetate extraction using GC- and LC-MS/MS (SweEt)
  • prEN 24491-4-1992 Metallic powders; determination of oxygen content by reduction methods; part 4: total oxyen by reduction-extraction (ISO 4491-4:1989)
  • EN 15637:2008 Foods of plant origin - Determination of pesticide residues using LC-MS/MS following methanol extraction and clean-up using diatomaceous earth
  • FprEN 17547-2021 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction clean-up and High Performance Liquid Chromatography
  • EN ISO 787-3:1995 General Methods of Test for Pigments and Extenders - Part 3: Determination of Matter Soluble in Water - Hot Extraction Method (ISO 787-3: 1979)
  • EN 24491-4:1993 Metallic Powders - Determination of Oxygen Content by Reduction Methods - Part 4: Total Oxygen by Reduction-Extraction (ISO 4491-4: 1989)

International Organization for Standardization (ISO), Commonly used for extraction

  • ISO 6427:2013 Plastics - Determination of matter extractable by organic solvents (conventional methods)
  • ISO 6427:1992 Plastics; determination of matter extractable by organic solvents (conventional methods)
  • ISO 6427:1982 Plastics — Determination of matter extractable by organic solvents (conventional methods)
  • ISO 17586:2016 Soil quality - Extraction of trace elements using dilute nitric acid
  • ISO 8502-15:2020 Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 15: Extraction of soluble contaminants for analysis by acid e
  • ISO 11379:2009 Textile floor coverings - Laboratory cleaning procedure using spray extraction
  • ISO 1952:1976 Brown coals and lignites; Method of extraction for the determination of sodium and potassium soluble in dilute hydrochloric acid
  • ISO 12914:2012 Soil quality - Microwave-assisted extraction of the aqua regia soluble fraction for the determination of elements
  • ISO 19730:2008 Soil quality - Extraction of trace elements from soil using ammonium nitrate solution
  • ISO 8795:1990 Plastics pipes for the transport of water intended for human consumption; extractability of constituents; test method
  • ISO 599:1985 Plastics; Polyamide homopolymers; Determination of matter extractable by boiling methanol
  • ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply; Extractability of lead and tin; Test method
  • ISO 8723:1986 Carbonaceous materials for the production of aluminium; Calcined coke; Determination of oil content; Method by solvent extraction
  • ISO 12243:2003 Medical gloves made from natural rubber latex - Determination of water-extractable protein using the modified Lowry method
  • ISO 3889:1977 Milk and milk products; Determination of fat content; Mojonnier-type fat extraction flasks
  • ISO 8871-1:2003 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates
  • ISO 23637:2021 Cereals — Determination of cadmium content by graphite furnace atomic absorption spectrometry with diluted nitric acid extraction
  • ISO 3858-1:1990 Carbon black for use in the rubber industry; determination of light transmittance of toluene extract; part 1: rapid method
  • ISO 4491-4:2013 Metallic powders.Determination of oxygen content by reduction methods.Part 4: Total oxygen by reduction-extraction
  • ISO 4491-4:1989 Metallic powders; determination of oxygen content by reduction methods; part 4: total oxygen by reduction-extraction
  • ISO 3858-2:1982 Title missing - Legacy paper document
  • ISO 3858-2:1990 Carbon black for use in the rubber industry; determination of light transmittance of toluene extract; part 2: method for product evaluation
  • ISO 787-14:2002 General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract
  • ISO 21571:2005/Amd 1:2013 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Nucleic acid extraction; Amendment 1
  • ISO 787-4:1981 General methods of test for pigments and extenders; Part 4 : Determination of acidity or alkalinity of the aqueous extract
  • ISO 20179:2005 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
  • ISO 24293:2009 Water quality - Determination of individual isomers of nonylphenol - Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS)
  • ISO 20280:2007 Soil quality - Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry
  • ISO 11085:2008 Cereals, cereals-based products and animal feeding stuffs - Determination of crude fat and total fat content by the Randall extraction method
  • ISO 6374:1981 Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of phosphorus content; Atomic absorption spectrometric method after extraction
  • ISO 10136-4:1993 Glass and glassware; analysis of extract solutions; part 4: determination of aluminium oxide by molecular absorption spectrometry
  • ISO 11085:2015 Cereals, cereals-based products and animal feeding stuffs - Determination of crude fat and total fat content by the Randall extraction method

British Standards Institution (BSI), Commonly used for extraction

  • BS EN ISO 6427:1999 Plastics - Determination of matter extractable by organic solvents (conventional methods)
  • BS EN ISO 6427:2014 Plastics. Determination of matter extractable by organic solvents (conventional methods)
  • BS 2071:1990 Specification for Soxhlet extractors
  • BS 2071:1989 Specification for Soxhlet extractors
  • BS ISO 17586:2016 Soil quality. Extraction of trace elements using dilute nitric acid
  • BS EN 16278:2012 Animal feeding stuffs. Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE)
  • BS 5293-16:1990 Sampling and testing carbon black for use in the rubber industry - Method for determination of solvent extractable material
  • BS ISO 22303:2009 Tobacco. Determination of tobacco specific nitrosamines. Method using buffer extraction
  • BS ISO 22303:2008 Tobacco - Determination of tobacco specific nitrosamines - Method using buffer extraction
  • BS EN 14671:2006 Characterization of Sludges. Pre-treatment for the Determination of Extractable Ammonia Using 2 mol/l Potassium Chloride
  • BS EN 14671:2007 Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride
  • BS ISO 19730:2009 Soil quality - Extraction of trace elements from soil using ammonium nitrate solution
  • BS EN ISO 8871-1:2004 Elastomeric parts for parenterals and for devices for pharmaceutical use - Extractables in aqueous autoclavates
  • BS EN ISO 14254:2018 Soil quality. Determination of exchangeable acidity using barium chloride solution as extractant
  • BS EN 15598:2008 Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction
  • BS EN ISO 9377-2:2000 Water quality. Determination of hydrocarbon oil index. Method using solvent extraction and gas chromatography
  • BS EN ISO 4491-4:2013 Metallic powders. Determination of oxygen content by reduction methods. Total oxygen by reduction-extraction
  • BS EN ISO 787-14:2002 General methods of test for pigments and extenders - Determination of resistivity of aqueous extract
  • BS DD ISO/TS 22304:2009 Tobacco - Determination of tobacco specific nitrosamines - Method using alkaline dichloromethane extraction
  • BS EN 50569:2013 Household and similar electrical appliances. Safety. Particular requirements for commercial electric spin extractors
  • BS EN 60335-2-68:2012 Household and similar electrical appliances. Safety. Particular requirements for spray extraction machines, for commercial use
  • BS EN 12350-1:2019 Tracked Changes. Testing fresh concrete. Sampling and common apparatus
  • BS PD CEN/TS 15968:2010 Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams. Method for sampling, extraction and analysis by LCqMS or LC-tandem/MS
  • BS ISO 12243:2003+A1:2012 Medical gloves made from natural rubber latex. Determination of water-extractable protein using the modified Lowry method
  • BS PD CEN/TR 17063:2017 Foods of plant origin. Multimethod for the determination of pesticide residues using GC- or LC-based analysis following acetonitrile extraction/partitioning and cleanup by dispersive SPE. Validation data of the modular QuEChERS-method
  • BS EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract
  • BS EN 14671:2006(2007) Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride
  • 23/30462494 DC BS EN 455-5. Medical gloves for single use - Part 5. Extractable chemical residues
  • BS 3483-C3:1982 Methods for testing pigments for paints - Determination of acidity or alkalinity of the aqueous extract
  • BS EN ISO 21571:2005+A1:2013 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Nucleic acid extraction
  • PD CEN/TS 17743:2022 Foodstuff. Determination of pesticide residues by ethyl acetate extraction using GC- and LC-MS/MS (SweEt)
  • BS EN ISO 18609:2001 Animal and vegetable fats and oils. Determination of unsaponifiable matter. Method using hexane extraction
  • BS EN 16057:2012 Influence of metallic materials on water intended for human consumption. Determination of residual surface lead (Pb). Extraction method
  • BS 6043-2.8:1987 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of oil content by solvent extraction of calcined coke
  • BS EN 15637:2008 Foods of plant origin - Determination of pesticide residues using LC-MS/MS following methanol extraction and clean-up using diatomaceous earth
  • BS EN 12393-2:2008 Foods of plant origin - Multiresidue methods for the gas chromatographic determination of pesticide residues - Part 2: Methods for extraction and cleanup
  • BS EN 1014-4:2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Determination of the water-extractable phenols content of creosote
  • BS 6043 Sec.4.3:1991 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Determination of aggregate size distribution after extraction by dichloromethane
  • 14/30298371 DC BS EN 60335-2-68 AMD1. Household and similar electrical appliances. Safety. Part 2-68. Particular requirements for spray extraction machines for commercial use
  • BS ISO 24293:2009 Water quality - Determination of individual isomers of nonylphenol - Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS)
  • BS ISO 20280:2008 Soil quality. Determination of arsenic, antimony and selenium in aqua regia soil extracts with electrothermal or hydride-generation atomic absorption spectrometry
  • 19/30393209 DC BS EN IEC 60335-2-68. Household and similar electrical appliances. Safety. Part 2-68. Particular requirements for spray extraction machines, for commercial use
  • BS 6043-4.3:1991 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Cold ramming pastes - Determination of aggregate size distribution after extraction by dichloromethane
  • BS EN 17547:2021 Animal feeding stuffs: Methods of sampling and analysis. Determination of vitamin A, E and D content. Method using solid phase extraction (SPE) clean-up and highperformance liquid chromatography (HPLC)
  • BS EN ISO 13437:1998 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory
  • BS EN ISO 17993:2002 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction

Association Francaise de Normalisation, Commonly used for extraction

  • NF EN ISO 6427:2014 Plastiques - Détermination des matières extractibles par des solvants organiques (Méthodes conventionnelles)
  • XP X31-080*XP CEN/TS 16177:2012 Sludge, treated biowaste and soil - Extraction for the determination of extractable ammonia, nitrate and nitrite
  • NF V18-251*NF EN 16278:2012 Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE)
  • NF X31-445*NF ISO 19730:2009 Soil quality - Extraction of trace elements from soil using ammonium nitrate solution.
  • NF X31-011*NF ISO 12914:2012 Soil quality - Microwave-assisted extraction of the aqua regia soluble fraction for the determination of elements.
  • NF EN ISO 14362-1:2017 Textiles - Méthodes de détermination de certaines amines aromatiques dérivées de colorants azoïques - Partie 1 : détection de l'utilisation de certains colorants azoïques accessibles avec ou sans extraction
  • NF T51-039*NF EN ISO 6427:2014 Plastics - Determination of matter extractable by organic solvents (conventional methods)
  • NF T45-136:1992 Raw material for the rubber industry. Carbon black. Determination of solvent extractable material.
  • NF G07-500*NF EN 15598:2008 Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction
  • NF T51-036:1986 Plastics. Polyamide homopolymers. Determination of matter extractable by boiling methanol.
  • NF T20-184*NF ISO 8723:1987 Carbonaceous materials for the production of aluminium. Calcined coke. Determination of oil content. Method by solvent extraction.
  • NF ISO 8723:1987 Produits carbonés pour la production de l'aluminium - Coke calciné - Détermination de la teneur en huile - Méthode par extraction à l'aide d'un solvant
  • NF EN 14671:2006 Caractérisation des boues - Prétraitement pour le dosage de l'azote ammoniacal extractible par une solution de chlorure de potassium à 2 mol/l
  • NF V03-023/A1*NF EN ISO 21571/A1:2013 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Nucleic acid extraction
  • NF S93-102-1*NF EN ISO 8871-1:2005 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1 : Extractables in aqueous autoclavates
  • NF A95-181-4*NF EN ISO 4491-4:2019 Metallic powders - Determination of oxygen content by reduction methods - Part 4 : total oxygen by reduction-extraction
  • NF P41-041*NF EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
  • NF EN ISO 17495:2003 Qualité de l'eau - Dosage des nitrophénols sélectionnés - Méthode par extraction en phase solide avec détection par chromatographie en phase gazeuse et spectrométrie de masse
  • NF T70-319:1995 Energetic materials for defense. Physical-chemical analysis and properties. Double extraction of high explosives with solvent.
  • NF EN ISO 787-8:2001 Méthodes générales d'essai des pigments et matières de charge - Partie 8 : détermination des matières solubles dans l'eau - Méthode par extraction à froid
  • NF EN ISO 787-3:2001 Méthodes générales d'essai des pigments et matières de charge - Partie 3 : détermination des matières solubles dans l'eau - Méthode par extraction à chaud
  • NF A95-181-4:2013 Metallic powders - Determination of oxygen content by reduction methods - Part 4: total oxygen by reduction-extraction
  • NF A95-181-4:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 4: total oxygen by reduction-extraction
  • NF T90-123*NF EN ISO 11369:1997 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction.
  • NF T54-081:1987 Plastics. Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply. Extractability of cadmium and mercury occurring as impurities.
  • NF U42-602-1*NF EN 13466-1:2002 Fertilizers - Determination of water content (Karl Fischer methods) - Part 1 : methanol as extracting medium.
  • NF T51-030:1986 Plastics. Determination of the percentage of extractable materials by boilling water in polyamide 6 (refractometric method).
  • NF EN ISO 11369:1997 Qualité de l'eau - Dosage de certains agents de traitement des plantes - Méthode par chromatographie en phase liquide haute performance (CLHP) avec détection UV après extraction solide-liquide
  • NF U42-602-2*NF EN 13466-2:2002 Fertilizers - Determination of water content (Karl Fischer methods) - Part 2 : 2-propanol as extracting medium
  • NF T70-346:1996 Energetic materials for defense. Physico-chemical analysis and properties. Determination of viton in octoviton. Method by extraction.
  • NF T70-337:1997 Energetic materials for defense. Physico-chemical analysis and properties. Determination of secondary explosive constituents by room temperature extraction.
  • NF T90-202:1979 Essais des eaux - Effluents aqueux des raffineries de pétrole - Dosage des matières organiques en suspension dans l'eau extractibles à l'hexane
  • NF EN ISO 6468:1997 Qualité de l'eau - Dosage de certains insecticides organochlorés, des polychlorobiphényles et des chlorobenzènes - Méthode par chromatographie en phase gazeuse après extraction liquide-liquide
  • NF V18-806*NF EN 17547:2021 Animal feeding stuffs - Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC)
  • NF T70-347:1997 Energetic materials for defense. Physico-chemical analysis and properties. Determination of graphite content in secondary explosives by extraction.
  • NF V03-062*NF EN 15637:2009 Foods of plant origin - Determination of pesticide residues using LC-MS/MS following methanol extraction and clean-up using diatomaceous earth

RO-ASRO, Commonly used for extraction

  • STAS 9116-1990 Oil extract for carbon black
  • STAS 21/8-1980 SOYA BEAN EXTRACTION RESIDUES FOR FORAGE
  • STAS 8004-1982 OLEAGINEOUS SEEDS Determination of oil content by extraction with petroleum ether
  • SR EN 645-1996 Paper and board intended to come into contact with foodstuffs-Preparation of a cold water extract

American Society for Testing and Materials (ASTM), Commonly used for extraction

  • ASTM D5284-09(2023) Standard Test Method for Sequential Batch Extraction of Waste with Acidic Extraction Fluid
  • ASTM D5369-93(2008)e1 Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction
  • ASTM F619-14 Standard Practice for Extraction of Medical Plastics
  • ASTM D5369-93(1998) Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction
  • ASTM F619-03(2008) Standard Practice for Extraction of Medical Plastics
  • ASTM D7168-05 Standard Test Method for99Tc in Water by Solid Phase Extraction Disk
  • ASTM D7168-11e1 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
  • ASTM D3987-06 Standard Test Method for Shake Extraction of Solid Waste with Water
  • ASTM D1239-98 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
  • ASTM D6016-06 Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
  • ASTM D5517-07 Standard Test Method for Determining Extractability of Metals from Art Materials
  • ASTM D7168-16 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
  • ASTM D7168-21 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
  • ASTM D4578-06(2021) Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction
  • ASTM D7168-11 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
  • ASTM D5263-21 Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
  • ASTM D1239-14 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
  • ASTM D473-02(2006) Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM G136-96(2002) Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
  • ASTM G136-96 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
  • ASTM F1308-98 Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
  • ASTM F1308-98(2003) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
  • ASTM D473-07 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D473-07(2012) Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D473-22 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D5263-15 Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction
  • ASTM E1979-98 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
  • ASTM E1979-12(2016) Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
  • ASTM D7621-16(2021) Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D4578-22 Standard Test Methods for Rubber Chemicals—Determination of Percent Insoluble Sulfur by Extraction
  • ASTM D473-07(2012)e1 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D473-07(2017) Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
  • ASTM D7621-15 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM G136-03 Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
  • ASTM G136-03(2009) Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
  • ASTM F1308-98(2008) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
  • ASTM G120-15 Standard Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction
  • ASTM D7621-13 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7621-14 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7621-15a Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM D7621-16 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • ASTM E1386-00 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
  • ASTM E1386-95 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
  • ASTM E1386-00(2005) Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
  • ASTM E1386-09 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
  • ASTM D7202-05 Standard Test Method for Determination of Beryllium in the Workplace Using Field-Based Extraction and Fluorescence Detection
  • ASTM D5258-92(1996) Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
  • ASTM D7202-21 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
  • ASTM D7202-15 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
  • ASTM D7202-22 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
  • ASTM D5258-22 Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
  • ASTM F1519-98 Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
  • ASTM F1519-98(2003) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
  • ASTM D7202-06 Standard Test Method for Determination of Beryllium in the Workplace Using Field-Based Extraction and Fluorescence Detection
  • ASTM D5351-93(2003) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
  • ASTM D4542-07 Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
  • ASTM D7202-11 Standard Test Method for Determination of Beryllium in the Workplace Using Field-Based Extraction and Optical Fluorescence Detection
  • ASTM F1308-98(2014) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
  • ASTM F1519-98(2008) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
  • ASTM D7202-14 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
  • ASTM D5351-93(2021) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
  • ASTM G136-03(2016) Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
  • ASTM C1457-00 Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
  • ASTM D5258-02 Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
  • ASTM F2519-05 Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
  • ASTM D5258-02(2007) Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
  • ASTM D4578-89(2002) Standard Test Methods for Rubber Chemicals8212;Determination of Percent Insoluble Sulfur by Solvent Extraction
  • ASTM D4578-89(1998) Standard Test Methods for Rubber Chemicals-Determination of Percent Insoluble Sulfur by Solvent Extraction
  • ASTM F2519-05(2011) Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
  • ASTM D7567-09 Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction
  • ASTM E2941-14 Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion
  • ASTM F2519-05(2011)e1 Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
  • ASTM F2519-05(2015) Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
  • ASTM D6889-03(2017) Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
  • ASTM C1457-00(2010)e1 Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
  • ASTM D6889-03 Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
  • ASTM D6010-96(2006) Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices
  • ASTM D6010-96(2001) Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices
  • ASTM D5351-93(2009) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
  • ASTM D6010-12 Standard Practice for Closed Vessel Microwave Solvent Extraction of Organic Compounds from Solid Matrices
  • ASTM D6889-03(2011) Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
  • ASTM D5258-02(2013) Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
  • ASTM E1386-23 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
  • ASTM D5175-91(2003) Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
  • ASTM C1457-00(2005) Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
  • ASTM E1979-04 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
  • ASTM F1724-96 Standard Test Method for Measuring Surface Metal Contamination of Polycrystalline Silicon by Acid Extraction-Atomic Absorption Spectroscopy
  • ASTM F1519-98(2014) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
  • ASTM F1519-98(2019) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
  • ASTM D7458-21 Standard Test Method for Determination of Beryllium in Soil and Sediment Using Ammonium Bifluoride Extraction and Fluorescence Detection
  • ASTM D4542-15 Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
  • ASTM D6348-98 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D6021-96(2001)e1 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
  • ASTM E3346-22 Standard Guide for Combustion, Inert Gas Fusion and Hot Extraction Instruments for use in Analyzing Metals, Ores, and Related Materials
  • ASTM D6348-12 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D6348-12(2020) Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

Group Standards of the People's Republic of China, Commonly used for extraction

  • T/ZZB 1750-2020 Bamboo vinegar extractive purified liquid for deodorization and antimicrobial
  • T/CNTAC 59-2020 Technical specification for reactive dyes cotton dyeing residue extraction salt reuse system engineering
  • T/JPMA 002-2019 Determination of 9 organophosphorus flame retardants in drinking water by solid phase extraction-gas chromatography method
  • T/FSBMEA 0001-2023 Simultaneous Determination of 16 Coumarin Compounds in Cosmetics Plant Extract RawMaterials by Ultra Performance Liquid Chromatography-Mass Spectrometry

AENOR, Commonly used for extraction

  • UNE-EN ISO 6427:2015 Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013)
  • UNE 40228-6:1974 DETERMINATION OF EXTRACTABLE MATTER WITH ALCOHOL IN WASHED WOOL SUBSAMPLES.
  • UNE-EN ISO 18609:2002 Animal and vegetable fats and oils. Determination of unsaponifiable matter. Method using hexane extraction. (ISO 18609:2000).
  • UNE-EN ISO 3596:2002 Animal and vegetable fats and oils. Determination of unsaponifiable matter. Method using diethyl ether extraction. (ISO 3596:2000)
  • UNE 21370:1985 METHODS OF TEST FOR THE DETERMINATION OF IONIC IMPURITIES IN ELECTRICAL INSULATING MATERIALS BY EXTRACTION WITH LIQUIDS.
  • UNE-EN 14671:2007 Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride
  • UNE-EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
  • UNE-EN ISO 17993:2004 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction (ISO 17993:2002)
  • UNE-EN ISO 9377-2:2001 Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography. (ISO 9377-2:2000)

Japanese Industrial Standards Committee (JISC), Commonly used for extraction

  • JIS K 5101-17-2:2004 Test methods for pigments -- Part 17: pH value -- Section 2: Extraction at normal temperature
  • JIS K 5101-16-2:2004 Test methods for pigments -- Part 16: Matter soluble in water -- Section 2: Extraction at normal temperature
  • JIS B 7993:2008 Automated measuring systems for flue gas using non-exractive methods
  • JIS B 7991:2002 Automated measuring systems for sulfur dioxide in flue gas using non-extractive methods
  • JIS B 7992:2002 Automated measuring systems for oxides of nitrogen in flue gas using non-extractive methods
  • JIS K 0400-28-20:1999 Water quality Determination of selected monovalent phenols -- Part 1: Gas-chromatographic method after enrichment by extraction

Korean Agency for Technology and Standards (KATS), Commonly used for extraction

  • KS M ISO 787-14:2012 General methods of test for pigments and extenders-Part 14:Determination of resistivity of aqueous extract
  • KS M ISO 787-4:2007 General methods of test for pigments and extenders-Part 4:Determination of acidity or alkalinity of the aqueous extract
  • KS M ISO 787-3:2012 General methods of test for pigments and extenders-Part 3:Determination of matter soluble in water-Hot extraction method
  • KS M ISO 787-8:2007 General methods of test for pigments and extenders-Part 8:Determination of matter soluble in water-Cold extraction method
  • KS I ISO 17586:2022 Soil quality — Extraction of trace elements using dilute nitric acid
  • KS L ISO 21951:2004 Coated abrasives-Plain discs with holes for dust extraction
  • KS L ISO 21951:2013 Coated abrasives-Plain discs with holes for dust extraction
  • KS K ISO 11379:2022 Textile floor coverings — Laboratory cleaning procedure using spray extraction
  • KS I ISO 19730:2009 Soil quality-Extraction of trace elements from soil using ammonium nitrate solution
  • KS M ISO 8723:2004 Carbonaceous materials for the production of aluminium-Calcined coke-Determination of oil content-Method by solvent extraction
  • KS M ISO 12243:2007 Medical gloves made from natural rubber latex-Determination of water-extractable protein using the modified Lowry method
  • KS M ISO 6992-2003(2013) Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply-Extractability of cadmium and mercury occurring as impurities
  • KS M ISO 12243:2017 Medical gloves made from natural rubber latex — Determination of water-extractable protein using the modified Lowry method
  • KS M ISO 8723-2004(2019) Carbonaceous materials for the production of aluminium-Calcined coke-Determination of oil content-Method by solvent extraction
  • KS M ISO 3858-1:2009 Carbon black for use in the rubber industry-Determination of light transmittance of toluene extract-Part 1:Rapid method
  • KS M ISO 3858-1-2002(2007) Carbon black for use in the rubber industry-Determination of light transmittance of toluene extract-Part 1:Rapid method
  • KS M ISO 3114:2003 Unplasticized polyvinyl chloride(PVC-U) pipes for potable water supply-Extractability of lead and tin-Test method
  • KS P ISO 8871-1-2010(2016) Elastomeric parts for parenterals and for devices for pharmaceutical use-Part 1:Extractables in aqueous autoclavates
  • KS M ISO 787-3-2012(2017) General methods of test for pigments and extenders-Part 3:Determination of matter soluble in water-Hot extraction method
  • KS M ISO 3858-2-2002(2007) Carbon black for use in the rubber industry-Determination of light transmittance of toluene extract-Part 2:Method for product evaluation
  • KS M ISO 787-8-2007(2017) General methods of test for pigments and extenders-Part 8:Determination of matter soluble in water-Cold extraction method
  • KS C IEC 60335-2-68:2014 Household and similar electrical appliances — Safety — Part 2-68: Particular requirements for spray extraction machines, for commercial use
  • KS C IEC 60335-2-68:2007 Household and similar electrical appliances-Safety-Part 2-68:Particular requirements for spray extraction appliances, for industrial and commercial use
  • KS K ISO 13437:2007 Geotextiles and geotextile-related products-Method for installing and extracting samples in soil, and testing specimens in laboratory
  • KS P ISO 8871-1:2021 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates

IN-BIS, Commonly used for extraction

RU-GOST R, Commonly used for extraction

  • GOST 28508-1990 Vegetable tanning extracts. Methods of determination
  • GOST 32976-2014 Hard coal. Determination of the relative degree of oxidation by the method of alkali extracnion
  • GOST 3594.5-1977 Moulding clay. Method for the determination of hydrogen ion concentration of water extract
  • GOST 21216.8-1993 Clay raw materials. Method for determination of sulphate ions in water extract
  • GOST 2706.7-1974 Benzene hydrocarbons and allied products. Method of determination of water extraction reaction
  • GOST 23409.22-1978 Moulding sands and sand mixtures. Method for determination of water extract hydrogen ions concentration
  • GOST R ISO 8871-1-2010 Elastomeric parts for parenterals and for devices for pharmaceutical use. Part 1. Extractables in aqueous autoclavates
  • GOST R ISO 8723-2015 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of oil content. Method by solvent extraction
  • GOST 27417-1998 Metallic powders. Determination of total oxygen by reduction - extraction
  • GOST 27417-1987 Metal powders. Methods for determination of oxygen
  • PNST 94-2016 Automobile roads of general use. Hot asphalt mixtures and asphalt. Determination of binder content by extraction method
  • GOST 33457-2015 Fruit and vegetable products. Method for qualitative detection of synthetic colours using ion-paired extraction
  • GOST ISO 3890-1-2013 Milk and milk products. Determination of residues of organochlorine compounds (pesticides). Part 1. General considerations and extraction methods

Taiwan Provincial Standard of the People's Republic of China, Commonly used for extraction

  • CNS 11453-1985 Hide Powder for Analysis of Vegetable Tannin Extracts
  • CNS 7312-1986 Assembly of Soxhlet's Glass Extractor for Chemical Analysis
  • CNS 10633-1983 Method of Test for Lead, Arsenic and Alkal Content Extracted From Carbonated Beverage Bottles

CU-NC, Commonly used for extraction

  • NC 3-1966 Code of hygiene practices for the extraction elaboration and commercialization of drinking water

国家市场监督管理总局、中国国家标准化管理委员会, Commonly used for extraction

  • GB/T 36796-2018 Rubber latex gloves for food services—Limits for extractable substances

KR-KS, Commonly used for extraction

  • KS I ISO 17586-2022 Soil quality — Extraction of trace elements using dilute nitric acid
  • KS K ISO 11379-2022 Textile floor coverings — Laboratory cleaning procedure using spray extraction
  • KS C IEC 60335-2-4-2013(2023) Household and similar electrical appliances-Safety-Part 2-4:Particular requirements for spin extractors
  • KS P ISO 8871-1-2021 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Commonly used for extraction

  • GB/T 27754-2011 Home textiles.The limited of water extraction material within towel
  • GB/T 28025-2011 Determination of the residure chlorine in products with filling materials.Water extraction method
  • GB/T 16416-1996 Method of extraction for the determination of sodium and potassium in brown coal soluble in dilute hydrochloric acid
  • GB/T 16416-2007 Method of extraction for the determination of sodium and potassium in brown coal soluble in dilute hydrochloric acid
  • GB 7196-1987 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
  • GB/T 7196-1987 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
  • GB/T 7196-2012 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
  • GB/T 10726-1989 Chemical reagent--General method for the determination of metals by solvent extraction followed by AAS
  • GB/T 10726-2007 Chemical reagent.General method for the determination of metals by solvent extraction followed by AAS
  • GB/T 10538-1989 Analytical methods for boiler water and cooling water--Determination of quoaternary ammonium salte--Trichloromethane extraction spectrophtometry
  • GB/T 26310.4-2010 Carbonaceous materials used in the production of aluminium.Calcined coke.Part 4:Determination of oil content.Method by solvent extraction

Danish Standards Foundation, Commonly used for extraction

  • DS/CEN/TS 16177:2012 Sludge, treated biowaste and soil - Extraction for the determination of extractable ammonia, nitrate and nitrite
  • DS/EN 14671:2006 Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride
  • DS/EN ISO 4491-4:2013 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction
  • DS/EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
  • DS/EN 24491-4:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 4: Total oxygen by reduction-extraction
  • DS/EN ISO 11369:1998 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction

German Institute for Standardization, Commonly used for extraction

  • DIN ISO 21951:2001 Coated abrasives - Plain discs with holes for dust extraction (ISO 21951:2001)
  • DIN 19730:1997 Soil quality - Extraction of trace elements with ammonium nitrate solution
  • DIN EN 16278:2012 Animal feeding stuffs - Determination of inorganic arsenic by hydride generation atomic absorption spectrometry (HG-AAS) after microwave extraction and separation by solid phase extraction (SPE); German version EN 16278:2012
  • DIN EN 455-5:2023 Medical gloves for single use - Part 5: Extractable chemical residues; German and English version prEN 455-5:2023
  • DIN EN ISO 6427:1998 Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:1992); German version EN ISO 6427:1998
  • DIN EN 455-5:2023-04 Medical gloves for single use - Part 5: Extractable chemical residues; German and English version prEN 455-5:2023 / Note: Date of issue 2023-03-24
  • DIN 10280:1973-08 Apparatus for dairy analysis; Mojonnier type extraction flask for the determination of fat content
  • DIN EN 920:2000 Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract; German version EN 920:2000
  • DIN EN 14671:2006-09 Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride; German version EN 14671:2006
  • DIN EN 12350-1:2019 Testing fresh concrete - Part 1: Sampling and common apparatus
  • DIN EN 12350-1:2019-09 Testing fresh concrete - Part 1: Sampling and common apparatus; German version EN 12350-1:2019
  • DIN SPEC 1038:2010 Determination of extractable perfluorooctanesulfonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS; German version CEN/TS 15968:2010
  • DIN EN 14719:2005 Pulp, paper and board - Determination of the Diisopropylnaphthalene (DIPN) content by solvent extraction; German version EN 14719:2005
  • DIN EN ISO 18609:2002-03 Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using hexane extraction (ISO 18609:2000); German version EN ISO 18609:2001
  • DIN EN ISO 3596:2002-03 Animal and vegetable fats and oils - Determination of unsaponifiable matter - Method using diethyl ether extraction (ISO 3596:2000); German version EN ISO 3596:2001
  • DIN EN ISO 14254:2018-11 Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO 14254:2018); German version EN ISO 14254:2018
  • DIN EN ISO 4491-4:2012 Metallic powders - Determination of oxygen content by reduction methods - Part 4: Total oxygen by reduction-extraction
  • DIN EN 15598:2008 Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction; English version of DIN EN 15598:2008-11
  • DIN CEN/TS 17743:2022-10 Foodstuff - Determination of pesticide residues by ethyl acetate extraction using GC- and LC-MS/MS (SweEt); German version CEN/TS 17743:2022
  • DIN EN 15921:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at 65 °C; German version EN 15921:2011
  • DIN 58356-11:1997 Membrane filter elements - Part 11: Determination of non volatile extractable components by soaking procedure
  • DIN EN ISO 6427:2014 Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013); German version EN ISO 6427:2014
  • DIN 51933:2012 Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials
  • DIN EN ISO 14254:2018 Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO 14254:2018)
  • DIN ISO 4491-4:1990 Metallic powders; determination of oxygen content by reduction methods; total oxygen by reduction-extraction; identical with ISO 4491-4:1989
  • DIN EN ISO 8871-1:2004-11 Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates (ISO 8871-1:2003); German version EN ISO 8871-1:2004, text in German and English
  • DIN ISO 787-4:1983 General methods of test for pigments and extenders; part 4: determination of acidity or alkalinity of the aqueous extract
  • DIN EN 15637:2009 Foods of plant origin - Determination of pesticide residues using LC-MS/MS following methanol extraction and clean-up using diatomaceous earth; English version of DIN EN 15637:2009-02
  • DIN EN 17547:2020 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction clean-up and High Performance Liquid Chromatography; German and English version prEN 17547:2020
  • DIN 51933:1990 Testing of carbon materials; determination of content of dedusting substances in cokes by extraction; solid materials
  • DIN VDE 0303-33:1991 Testing of insulating materials; methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids; identical with IEC 60589:1977 (status as of 1978)
  • DIN EN 17547:2022 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC)
  • DIN EN 17547:2022-01 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC); German version EN 17547:2021
  • DIN EN 16057:2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method; German version EN 16057:2012
  • DIN EN 17899:2022 Water quality - Spectrophotometric determination of chlorophyll-a content by ethanol extraction for the routine monitoring of water quality; German and English version prEN 17899:2022

NL-NEN, Commonly used for extraction

  • NEN-EN 645-1994 Paper and board intended to come into contact with foodstuffs.Preparation of a cold water extract
  • NEN-EN 647-1994 Paper and board intended to come into contact with foodstuffs.Preparation of a hot water extract
  • NEN-ISO 4491-4:1993 Metallic powders. Determination of oxygen content by reduction methods. Part 4: Total oxygen by reduction-extraction (ISO 4491-4:1989)

PL-PKN, Commonly used for extraction

  • PN C89063-1986 Plastics products Determination ot' matter extractable by organie solvents
  • PN C04841-1990 Agents for launderingland washing Washing powder and pastes Determination of matter extrable by ethyl alcohol

TR-TSE, Commonly used for extraction

  • TS 2387-1976 DETERMINATION OF pH VALUE OF THE WATER-EXTRACT FROM BLEACHED TEXT1LE MATERIALE (BY pH METER)
  • TS 2325-1976 GENERAL METHODS OF TEST FOR PIGMENTS PART — VIII DETERMINATION OF MATTER SOLUBLE ?N WATER (COLD EXTRACTION METHOD)
  • TS 2613-1977 General Methods of Test For Pipents PartXIV Determination of Resistivity of flpeons Extract

Military Standard of the People's Republic of China-General Armament Department, Commonly used for extraction

  • GJB 212.12-1986 Determination of dichloromethane extracts from leather for special industrial use
  • GJB 215.6-1986 Leather seals for special industrial use - Determination of benzene extractables
  • GJB 2589.18A-2021 Test methods for physical and chemical properties of military leather fur Part 18: Determination of methylene chloride extract

CZ-CSN, Commonly used for extraction

  • CSN 79 3875-1975 Testing of leather and furs. Determination of substances extractable by means of dichlormethan
  • CSN 34 6464-1985 Method of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids

ZA-SANS, Commonly used for extraction

  • SANS 11379:2003 Textile floor coverings - Laboratory cleaning procedure using spray extraction
  • SANS 17495:2002 Water quality - Determination of selected nitrophenols - Method by solid-phase extraction and gas chromatography with mass spectrometric detection

IT-UNI, Commonly used for extraction

European Committee for Electrotechnical Standardization(CENELEC), Commonly used for extraction

  • HD 381-1979 Methods of Test for the Determination of Ionic Impurities in Electrical Insulating Materials by Extraction with Liquids

国家质量监督检验检疫总局, Commonly used for extraction

  • SN/T 4852-2017 Evaluation Guide for Solid Phase Extraction Columns for Food Testing Polymer Ion Exchange Columns

CEN - European Committee for Standardization, Commonly used for extraction

  • PREN 12350-1-2017 Testing fresh concrete - Part 1: Sampling and common apparatus
  • EN ISO 787-14:2019 General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract
  • EN ISO 787-4:2017 General methods of test for pigments and extenders - Part 4: Determination of acidity or alkalinity of the aqueous extract
  • EN 14524:2004 Foodstuffs - Determination of okadaic acid in mussels - HPLC method with solid phase extraction clean-up@ derivatization and fluorimetric detection

ES-UNE, Commonly used for extraction

  • UNE-EN 12350-1:2020 Testing fresh concrete - Part 1: Sampling and common apparatus
  • UNE-EN ISO 14254:2018 Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO 14254:2018) (Endorsed by Asociación Española de Normalización in June of 2018.)
  • UNE-CEN/TS 17743:2022 Foodstuff - Determination of pesticide residues by ethyl acetate extraction using GC- and LC-MS/MS (SweEt) (Endorsed by Asociación Española de Normalización in May of 2022.)
  • UNE-EN 17547:2022 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC)

VN-TCVN, Commonly used for extraction

  • TCVN 6140-1996 Unplasticized polyvinyl choloride (PVC.U) pipes for drinking water supply.Extractability of cadmium and mercury occurring as impurities

SE-SIS, Commonly used for extraction

  • SIS SS IEC 589:1982 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids

Lithuanian Standards Office , Commonly used for extraction

  • LST EN 14671-2006 Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride
  • LST EN 16057-2012 Influence of metallic materials on water intended for human consumption - Determination of residual surface lead (Pb) - Extraction method
  • LST HD 381 S1-2002 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids (IEC 60589:1977)
  • LST EN ISO 17993:2004 Water quality - Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction (ISO 17993:2002)

CENELEC - European Committee for Electrotechnical Standardization, Commonly used for extraction

  • HD 381-1978 Methods of Test for the Determination of Ionic Impurities in Electric Insulation Materials by Extraction with Liquids

PT-IPQ, Commonly used for extraction

  • NP 1782-1986
  • NP 902-1987 Edible fats and oils Determination of unsaponifiable matter. Method using hexane. extraction. Routine method

International Electrotechnical Commission (IEC), Commonly used for extraction

  • IEC 60335-2-68:2021 RLV Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use
  • IEC 60335-2-68:2012/AMD1:2016 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use
  • IEC 60335-2-68:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction machines, for commercial use
  • IEC 60335-2-68:2005 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction appliances, for industrial and commercial use
  • IEC 60335-2-68:2007 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction appliances, for industrial and commercial use
  • IEC 60335-2-68:2002 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction appliances, for industrial and commercial use
  • IEC 60335-2-68/AMD2:2007 Household and similar electrical appliances - Safety - Part 2-68: Particular requirements for spray extraction appliances, for industrial and commercial use; Amendment 2

Professional Standard - Agriculture, Commonly used for extraction

  • GB 10726-1989 General method for the determination of metal impurities by chemical reagent solvent extraction-atomic absorption spectrometry

Professional Standard - Commodity Inspection, Commonly used for extraction

  • SN/T 3626-2013 Determination of hexanal in edible oil for export.Headspace-SPME-GC method

(U.S.) Ford Automotive Standards, Commonly used for extraction

  • FORD FLTM AO 108-02-2021 DETERMINATION OF ACETIC ACID IN RESINS QUANTITATIVELY USING THERMAL EXTRACTION AND GAS CHROMATOGRAPHY - MASS SPECTROMETRY (GC-MS)

Hebei Provincial Standard of the People's Republic of China, Commonly used for extraction

  • DB13/T 5459-2021 Determination of anionic synthetic detergents in drinking water by direct extraction spectrophotometry

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Commonly used for extraction

  • IPC TM-650 2.3.25-2001 Detection and Measurement of Ionizable Surface Contaminants by Resistivity of Solvent Extract (ROSE) Revision C [Superseded: IPC TM-650 2.3.26, IPC TM-650 2.3.26.1]

TH-TISI, Commonly used for extraction

  • TIS 1780.14-1999 General methods of test for pigments.part ⅩⅣ: determination of resistivity of aqueous extract
  • TIS 1780.4-2000 General methods of test for pigments and extenders.part 4: determination of acidity or alkalinity of the aqueous extract

Indonesia Standards, Commonly used for extraction

  • SNI 06-6989.37-2005 Water and waste water - Part 37: Test methods of cadmium (Cd) content with atomic absorption spectrophotometers (AAS) by extraction
  • SNI 06-6989.49-2005 Water and waste water - Part 49: Test methods of iron (Fe) content with atomic absorption spectrophotometers (AAS) by extraction
  • SNI 06-6989.47-2005 Water and wastewater - Part 47: Test methods of nickel (Ni) content with atomic absorption spectrophotometers (AAS) by extraction
  • SNI 06-6989.52-2005 Water and waste water - Part 52: Test methods of nitrogen organic content by macro Kjeldahl and titration
  • SNI 6989.67-2009

未注明发布机构, Commonly used for extraction

  • BS 4088-1.2:1995(1999) Carpet cleaning products — Part 1 : Methods of sampling and test — Section 1.2 Determination of cleaning performance of formulations designed for use with spray extraction machines
  • BS 6043-4.3:1991(2008) Methods of sampling and test for Carbonaceous materials used in aluminium manufacture — Part 4 : Cold ramming pastes — Section 4.3 Determination of aggregate size distribution after extraction by dichloromethane

GM North America, Commonly used for extraction

  • GMP.PA66.062-2011 Nylon 66 ?Very High Impact Modified, Heat Stabilized Do Not Use on New Programs; Replaced by GMW16447

Inner Mongolia Provincial Standard of the People's Republic of China, Commonly used for extraction

  • DB15/T 2687-2022 Determination of volatile components in natural green hay by headspace solid-phase microextraction-gas chromatography mass spectrometry

AT-ON, Commonly used for extraction

  • ONORM L 1086-1-2001 Chemical analyses of soils - Determination of exchangeable cations and of effective cation exchange capacity (CECeff) by extraction with bariumchloride solution

Aerospace Industries Association, Commonly used for extraction

  • AIA NAS 1021-1991 (Inactive)Nut, Self-Locking, Hexagon-Regular Height Superseded - September 1985 (Use MS21042 Thru MS21046) (Rev. 10)

Standard Association of Australia (SAA), Commonly used for extraction

  • AS ISO/IEC 19762.1:2006 Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary - General terms relating to AIDC




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved