m2a m2m

m2a m2m, Total:500 items.

In the international standard classification, m2a m2m involves: Products of the chemical industry, Pipeline components and pipelines, Waxes, bituminous materials and other petroleum products, Welding, brazing and soldering, Heat pumps, Machine tools, Education, Non-destructive testing, Lifting equipment, Plastics, Linear and angular measurements, Mechanical testing, Gears, Technical drawings, Installations in buildings, Equipment for entertainment, Aerospace fluid systems and components, Components for aerospace construction, Ground service and maintenance equipment, Lamps and related equipment, Audio, video and audiovisual engineering, Analytical chemistry, Metalliferous minerals, Rubber and plastics products, Space systems and operations, Road engineering, Materials for aerospace construction, Mechanical structures for electronic equipment, Aerospace engines and propulsion systems, Non-ferrous metals, Corrosion of metals, Fuels, Photography, Reinforced plastics, Raw materials for rubber and plastics, Paint ingredients, Hydraulic fluids, Lubricants, industrial oils and related products, Paper and board, Rubber, Pulps, Cellular materials, Paints and varnishes, Soil quality. Pedology, Surface treatment and coating, Products of the textile industry, Hospital equipment, Vocabularies, Leather technology, Equipment for petroleum and natural gas industries, Protection against fire, Paint coating processes, Petroleum, petroleum products and natural gas handling equipment, Continuous handling equipment, Petroleum products in general, Footwear, External water conveyance systems.

AIAG - Automotive Industry Action Group, m2a m2m

M-2-1990 Standard Practice for Industry Use of Cumulative Records (Version 1)
M-2-1987 Materials Management Customer-Supplier Partnership

ESDU - Engineering Sciences Data Unit, m2a m2m

SPD-M2-2-2007 Molecular modelling of asphaltene containing systems.
SPA-M2-2-2007 Advanced characterisation of asphaltenes using vibrational spectroscopy.
SPA-M9-2-2008 A study of deposit formation in a micro-bomb reactor (MBR): effect of residence time - Sept. 08 update.
SPG-M8-2-2008 Fouling mitigation/control in preheat trains - Sept. 08 update.
SPF-M4-2-2007 Major effort on rig design.
SPF-M3-2-2007 Major effort on rig design.
SPA-M6-2-2010 Apr.08: Advances in characterising h lt bi asphaltenes combining macro- and micro- ATR-FTIR Imaging
SPG-M7-2-2010 Apr.08: Fouling mitigation in pre-heat trains. Network simulation
SPG-M12-2-2010 Sept.09: Modelling of fouling in heat exchangers: Overview@ recent results and opportunities
SPD-M6-2-2010 Apr.08: Coarse-Grained simulation of asphaltene-hydrocarbon containing systems
SPB-M6-2-2010 Apr.08: Colloidal Interactions Between Asphaltene and Different Surfaces Measured by Atomic force microscopy (AFM)
SPG-M10-2-2010 Apr.09: Advanced modelling and simulation of PHT hot-end exchangers for fouling mitigation
SPG-M5-2-2007 Modelling of shell-and-tube heat exchanger undergoing crude oil fouling.
SPA-M4-2-2007 Advances in characterising asphaltenes combining macro- and micro-ATR-FTIR imaging
SPG-M15-2-2010 Refinery preheat train modelling@ simulation and performance improvement
SPF-M8-2-2008 Fluid dynamic gauging - Sept 08 update.
SPD-M2-1-2007 Modelling asphaltenes using soft or related approaches.
SPD-M4-2-2007 Modelling asphaltenes using SAFT or related approaches.
SPB-M2-1-2007 Interfacial and rheological properties of asphaltenes studied by atomic force microscopy.
SPC-M3-2-2007 Stability of two-fluid flow through a channel.
SPF-M12-2-2010 Sept.09: Fluid dynamic gauging
SPA-M12-2-2010 Sept.09: Application of ATR-FTIR imaging to study precipitation due to heating of crude oil
SPD-M13-2-2010 Oct.09: Simulation of asphaltene-hydrocarbon containing systems
SPA-M10-2-2010 Apr.09: Probing into petroleum heath-exchanger deposits with spectroscopic imaging
SPF-M6-2-2010 Apr.08: Fluid dynamic gauging
SPD-M10-2-2010 Apr.09: Coarse-grained simulation of asphaltene-hydrocarbon containing systems
SPA-M2-1-2007 Characterisation of asphaltenes and deposited foulants.
SPD-M8-2-2008 Thermodynamic modelling of asphaltene - oil systems using SAFT - Sept. 08 update.

IT-UNI, m2a m2m

ANCC M.2.A.2-1973 UNI 5081-62 Special provisions for licensing of C steel plates
ANCC M.2.B.2-1973 UNI 6902-71 Special provisions for use of austenitic stainless steel plates in table 6903-71
ANCC M.6.A.2-1973 Thick-walled pig iron drum with white iron coating
ANCC M.2.A.9-1973 DIN 17155-1959 Special provisions for permission of use of non-alloy steel and alloy steel plates
ANCC M.2.A.8-1973 ASTM A 285-70a． A 299-70, A 442-70, A 515-70, A 516-70a, A 537-70 Special provisions for use permission of non-alloy steel and low alloy steel plates
ANCC M.2.A.11-1973 ASTM A 204-71． A 302-70.A 357-70a. A Special regulations for the use license of 387-70a alloy steel plate
ANCC M.2.A.1-1973 General characteristics requirements for acceptance of non-alloy steels, low alloy steels and alloy steel plates except stainless steel obligations
ANCC M.2.A.10-1973 ASTM A 203-71 and A 553-71 used with permission
ANCC M.3.A.2-1973 UNI 663-68 Special provisions for acceptance of non-alloy steel unwelded pipes
ANCC M.2.A.6-1973 Special Provisions for Use Permits of Non-Alloy or Low-Alloy Steels and Commercially Produced Alloy Steel Plates Bearing the Italsider abbreviation
ANCC M.2.A.4-1973 UNI 5869-66 Special provisions for permission to use non-alloy steels, low-alloy steels and alloy steel plates
ANCC M.2.A.7-1973 Special Provisions for Use Permits of Non-Alloy or Low Alloy Steel and Commercially Produced Alloy Steel Plate with Flack abbreviation
ANCC M.2.A.3-1973 UNI 5335-64 Special provisions for licensing of non-alloy steel plates
ANCC M.2.A.5-1973 Special provisions for license of UNI 592066 alloy steel plate

未注明发布机构, m2a m2m

MIL-M-55554A NOT 2
VDE 0720-2M-1971*DIN VDE 0720-2M:1971
MIL-M-49275 1 NOT 2
NCCLS M37-A2-2002
NCCLS M31-A2-2002
CLSI M40-A2-2014
CLSI M06-A2-2006
CLSI M35-A2-2008
CAN 2-75.1-M77
CAN 2-51.32-M77
CLSI M28-A2-2005
ASME MFC-2M-1983 Uncertainty in liquid flow measurements in sealed pipes
JIS M 8210-2:2023 Iron ores -- Determination of cobalt -- Part 2: Flame atomic absorption spectrometric method
JIS M 8230-2:2023 Iron ores -- Determination of bismuth -- Part 2: Flame atomic absorption spectrometric method after separation of iron

Compressed Gas Association (U.S.), m2a m2m

CGA M-2-2013 GENERAL GUIDE FOR THE MANUFACTURE OF MEDICAL GASES CLASSIFIED AS DRUGS
CGA M-2-2006 GENERAL GUIDE FOR THE MANUFACTURE OF MEDICAL GASES CLASSIFIED AS DRUGS FIRST EDITION

American Water Works Association (AWWA), m2a m2m

AWWA M2-2001 Instrumentation and Control Third Edition; Erratum: 03/2002

(U.S.) Ford Automotive Standards, m2a m2m

FORD ES2-M2A64-A-2003 BRASS, WROUGHT, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ES2-M2A65-A-2003 BRASS WROUGHT, SHEET AND TUBING, GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSE-M2A151-A2-2003 ALUMINUM ALLOY, CASTING, THERMALLY TREATED CONDITION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSH-M2A145-A2-2003 ALUMINUM BRAZING SHEET - TUBE STOCK ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2A146-A2-2003 ALUMINUM ALLOY, BRIGHT ANODISING QUALITY SHEET AND STRIP ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2A156-A2-2003 SPECIAL BRASS, Ni-Al-Co-Alloy ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A164-A2-2009 ALUMINUM ALLOY, EXTRUSION, OVERAGED, WELDABLE JAGUAR LAND ROVER ONLY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A164-A1)
FORD WSS-M2A171-A2-2009 DIE CAST ALUMINUM ?MEDIUM DUTY APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A171-A1
FORD WSH-M2A135-A2-2009 ALUMINUM FIN MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2A147-A2-2010 ALUMINUM ALLOY - BRIGHT ANODISING, IMPROVED APPEARANCE - SHEET AND STRIP ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A171-A2-2010 DIE CAST ALUMINUM - MEDIUM DUTY APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A165-A2-2013 ALUMINUM CASTING ALLOY, CYLINDER BLOCK, 9.5% SILICON ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A165-A
FORD WSS-M2A178-A2-2015 ALUMINUM CASTING ALLOY, CYLINDER HEAD, NORMAL DUTY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A178-A1)
FORD WSD-M2A143-A2-2014 ALUMINUM ALLOY, CASTING, HEAT TREATED CONDITION ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M2A143-A1)
FORD WSS-M2A165-A2-2014 ALUMINUM CASTING ALLOY, CYLINDER BLOCK, 9.5% SILICON ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A165-A)
FORD WSS-M2A163-A2-2014 ALUMINUM ALLOY, AUTOBODY SHEET, NON-HEAT TREATABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A163-A1)
FORD WSS-M2A177-A2-2012 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, SEAMLESS, HIGH STRENGTH, GRAIN SIZE CONTROLLED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A177-A1
FORD WSS-M2A177-A2-2014 ALUMINUM ALLOY, EXTRUSION, HEAT TREATABLE, SEAMLESS, HIGH STRENGTH, GRAIN SIZE CONTROLLED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A177-A1)
FORD WSS-M2A174-A2-2013 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, ENHANCED BAKE RESPONSE ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A174-A1
FORD WSS-M2A175-A2-2013 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, HIGH STRENGTH, THICK GAGE ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A175-A1
FORD WSS-M2A176-A2-2013 ALUMINUM ALLOY, SHEET, NON-HEAT TREATABLE, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A176-A1
FORD WSS-M2A174-A2-2014 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, ENHANCED BAKE RESPONSE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A174-A1)
FORD WSS-M2A175-A2-2015 ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, HIGH STRENGTH, THICK GAGE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A175-A1)
FORD WSS-M2A176-A2-2014 ALUMINUM ALLOY, SHEET, NON-HEAT TREATABLE, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A176-A1)
FORD M2A44-A-1984 METALLURGICAL ALUMINUM
FORD M2A107-A-1994 COPPER AND COPPER BASE ALLOYS FOR WELDING EQUIPMENT
FORD ESB-M2D246-A2-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER, PAINTABLE INTERMEDIATE MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M2D246-A1
FORD ESB-M2D280-A2-2004 SILICONE ELASTOMER, INHERENTLY LUBRICATED - POLYCARBONATE COMPATIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2D348-A2-2004 POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2A83-B2-2003 ALUMINUM ALLOY, EXTERIOR, ORNAMENTATION ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M2A83-B1
FORD ESA-M2P109-A2-2006 PAINT QUALITY, COLOR AND CLEAR COATING, EXTERIOR PARTS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M2P109-B)
FORD ESB-M2D354-A2-2004 POLYURETHANE MICROCELLULAR ELASTOMER, 15% GLASS FIBER REINFORCED - RRIM - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2J218-A2-2003 ENAMEL, ELASTOMERIC CLEARCOAT FOR BASECOAT/ CLEARCOAT WET ON WET PROCESS, EXTERIOR HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESB-M2J218-A1
FORD ESF-M2L25-A2-2003 COPPER WIRE, SOFT ROUND, POLYURETHANE INSULATION WITH POLYAMIDE OVERCOAT, 155 癈 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2L61-A2-2003 WIRE, ALUMINUM, 1.0% SILICON ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M2L61-A1
FORD ESF-M2L68-A2-2003 COPPER WIRE, SOFT ROUND, MODIFIED POLYURETHANE INSULATION WITH POLYAMIDE OVERCOAT, SOLDERABLE, 155 °C ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2C143-A2-2004 LUBRICATING OIL, HIGH TEMPERATURE, P/M IMPREGNATING, THICKENED ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESF-M2C143-A
FORD ESF-M2G156-A2-2003 ADHESIVE, EPOXY, ONE PART, THIXOTROPIC ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D53-A2-2004 FLUOROELASTOMER, OIL SEAL - VALVE STEM - HIGH HEAT - ABRASION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D338-A2-2004 FLUOROELASTOMER, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESE-M2D338-A1
FORD ESE-M2D347-A2-2004 SILICONE RUBBER, HIGH TEMPERATURE - LOW DUROMETER - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D364-A2-2004 SILICONE RUBBER, HIGH ELONGATION, POST CURED, LOW VOLATILE - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESE-M2D364-A
FORD ESH-M2C31-A2-2004 OIL, COMPRESSOR - REFRIGERATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESW-M2C2-B-2004 FLUID, TORQUE - AUTOMATIC TRANSMISSION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESP-M2D130-A2-2004 ETHYLENE ACRYLIC RUBBER, LOW TEMPERATURE RESISTANT-TEAR RESISTANT - OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESP-M2D166-A2-2004 ACRYLONITRILE RUBBER, DUST SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESP-M2D254-A2-2004 POLYACRYLIC RUBBER, HIGH TEMPERATURE - OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESP-M2D294-A2-2004 FLUOROELASTOMER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESP-M2D335-A2-2004 RUBBER, SILICONE - BOOT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESR-M2C163-A2-2004 FLUID, AUTOMATIC TRANSMISSION - 100% SYNTHETIC - SERVICE FILL - DEXRON - II - RED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESK-M2G264-A2-1995 ADHESIVE, PRIMER, SYNTHETIC RUBBER BASED, FOR ADHESIVE TAPE
FORD ESK-M2G298-A2-1995 ADHESIVE, SILICONE, TWO COMPONENT (Shown on ESK-M2G298-A1)
FORD ESK-M2G299-A2-2007 ADHESIVE, SEALER, SYNTHETIC RUBBER, HOT APPLIED 120 - 130 C, NON-REACTIVE Shown on ESK-M2G299-A1
FORD ESK-M2G305-A2-1991 ADHESIVE, HOT MELT, POLYURETHANE - MOISTURE CURING
FORD ESK-M2G307-A2-1987 ADHESIVE, POLYURETHANE - METAL TO METAL - HEAT CURING - HOT APPLICABLE
FORD ESK-M2G324-A2-1988 ADHESIVE, POLYURETHANE, ISOCYANATE Shown on ESK-M2G324-A1
FORD ESK-M2G365-A2-1995 ADHESIVE, POLYURETHANE, TWO COMPONENT, SOLVENT FREE, METAL TO E-COATED METAL, ISOCYANATE COMPONENT
FORD ESK-M2G367-A2-1992 ADHESIVE, POLYURETHANE, TWO COMPONENT, WATER BORNE, HARDENER Shown on ESK-M2G367-A1
FORD ESK-M2G369-A2-2003 ADHESIVE, POLYURETHANE, TWO COMPONENT, ISOCYANATE, METAL TO GLASS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESK-M2G369-A1
FORD ESW-M2D230-A2-2004 ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on ESW-M2D230-A1
FORD ESW-M2G142-A2-2002 ADHESIVE, THERMOSETTING - FOR FICTION MATERIALS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on ESW-M2G142-A1)
FORD WSB-M2D49-A2-2007 COATING, WEATHERSTRIP ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSA-M2P170-A2-2005 PAINT PERFORMANCE, CORROSION/HEAT RESISTANT COATING, 450 °C, MAX ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSA-M2P170-A1; Supersedes ESEN-M91J8-B, ESE-M99J1-A)
FORD WSB-M2D189-A2-2007 WEATHERSTRIP, EXPANDED EPDM, CLOSED CELL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M2D203-A2-2004 POLYURETHANE FOAM, INTEGRAL SKIN PAINTED FORMED ASSEMBLY, NON-CRITICAL AREAS, FUNCTIONAL PARTS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M2D452-A2-2004 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSB-M2D452-A)
FORD WSB-M2D462-A2-2004 THERMOPLASTIC ELASTOMER, CHLORINATED ETHYLENE [TE(PE-C)], 70 A HARDNESS, EXTERIOR ONLY ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSB-M2D462-A1
FORD WSB-M2F174-A2-2003 POLYVINYL CHLORIDE (PVC) FLOOR MATS, EMBOSSED, MOLDED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSB-M2F174-A1)
FORD WSB-M2G112-A2-1994 ADHESIVE, NITRILE BASE, FAST TACK, SOLVENT RELEASE TYPE
FORD WSB-M2G383-A2-2004 TAPE ADHESIVE, EPOXY BASED, STRUCTURAL, MEDIUM-EXPANDING HIGH TEMPERATURE HEAT CURING, WELDABLE, FLOW WASH RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSB-M2G383-A1
FORD WSE-M2D391-A2-2004 FLUOROELASTOMER (FKM), HIGH TEMPERATURE ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSE-M2D401-A2-2004 FLUOROELASTOMER (FKM), OXIDIZED FUEL RESISTANT, COMPRESSION STRESS RELAXATION RESISTANT, LOW TEMPERATURE RESISTANT, O-RING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSD-M2D401-A)
FORD WSF-M2G339-A2-2003 ADHESIVE, EPOXY, THERMAL CURE, SURFACE MOUNTED COMPONENTS ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on WSF-M2G339-A1
FORD WSD-M2A137-B2-2003 ALUMINUM, SILICON COPPER MAGNESIUM ALLOYS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSD-M2A137-B1)
FORD WSD-M2D363-A2-2004 FLUOROELASTOMER (FKM), HIGH HEAT AND COMPRESSION STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D378-A2-2001 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 60 DUROMETER A HARDNESS, INTERIOR
FORD WSD-M2D379-A2-2001 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 69 DUROMETER A HARDNESS, INTERIOR (Shown on WSD-M2D378-A2)
FORD WSD-M2D380-A2-2001 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 75 DUROMETER A HARDNESS, INTERIOR (Shown on WSD-M2D378-A2)
FORD WSK-M2D402-A2-2006 POLYURETHANE (PUR) FOAM, SLAB STOCK ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2D402-A1; USE WSB-M2D402-A3)
FORD WSK-M2D427-A2-2004 FLUOROELASTOMER (FKM), ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2D459-A2-2004 POLYACRYLIC (ACM) RUBBER, ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2D459-A)
FORD WSD-M2D405-A2-2007 RUBBER, ETHYLENE/PROPYLENE (EPDM), SOLID WEATHERSTRIPS, HARDNESS 70 IRHD - ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M2D405-A1)
FORD WSD-M2D440-A2-2004 FLUOROELASTOMER (FKM), OXYGENATED/OXIDIZED FUEL RESISTANT, METHANOL RESISTANT, 70 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G329-A2-2007 ADHESIVE, EPOXY, SOLVENT FREE, 180 DEGREES C CURING, 80 DEGREES C APPLICABLE, METAL/METAL, STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G329-A)
FORD WSK-M2G352-A2-2003 ADHESIVE, BODY, SOLVENT RELEASE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G401-A2-2003 ADHESIVES, CYANOACRYLATE, (CA), METHYL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G401-A1)
FORD WSK-M2G402-A2-2003 ADHESIVES, CYANOACRYLATE, (CA), ETHYL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G401-A1)
FORD WSK-M2G403-A2-2003 ADHESIVES, CYANOACRYLATE, (CA), SURFACE INSENSITIVE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G401-A1)
FORD WSK-M2G404-A2-2003 ADHESIVES, CYANOACRYLATE, (CA), THICKENED, TOUGHENED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G401-A1)
FORD WSK-M2G405-A2-2003 ADHESIVES, CYANOACRYLATE, (CA), ALKOXY, LOW ODOR, LOW BLOOM ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSK-M2G401-A1)
FORD WSK-M2P149-A2-1993 PAINT PERFORMANCE, PRIMED PARTS, 480 H SALT SPRAY, EXTERIOR (Shown on WSK-M2P149-A1)
FORD WSK-M2P161-A2-2006 PAINT PERFORMANCE, PLASTIC SUBSTRATES, INTERIOR 500 kj ARTIFICIAL WEATHERING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C204-A2-2003 FLUID, POWER ASSISTED STEERING, EXTENDED TEMPERATURE RANGE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D241-A2-2004 TUBING, ECO, EPICHLOROHYDRIN - FUEL AND OIL RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** ((Formerly ESE-M2D241-A2))
FORD WSS-M2D376-A2-2004 SILICONE RUBBER ENGINE COOLANT AND COMPRESSION STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D474-A2-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER, 60 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D476-A2-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 100% RECYCLED RUBBER MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D477-A2-2004 POLYURETHANE FOAM, 25% MINIMUM RECYCLED CONTENT HARDNESS 40 DUROMETER "00" ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D492-A2-2004 STYRENE BUTADIENE RUBBER (SBR) AND POLYMER BINDER, DIE CUT SHEET, POST CONSUMER RECYCLATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D496-A2-2004 POLYURETHANE (PUR) FOAM, CELLULAR GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D505-A2-2003 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 60 DUROMETER A HARDNESS, EXTERIOR APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D507-A2-2004 THERMOPLASTIC ELASTOMER (TES) STYRENE BLOCK COPOLYMER 60 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSS-M2D507-A)
FORD WSS-M2F206-A2-2006 FLEXIBLE POLYURETHANE COATED COVERSTOCK, NONWOVEN FABRIC BACKED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSS-M2F206-A1)
FORD WSS-M2G300-A2-2003 ADHESIVE, EPOXY, ONE COMPONENT, INDUCTION HEAT RESPONSIVE, STRUCTURAL, BONDLINE SPACERS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2G410-A2-2002 AFTERMARKET ADHESIVE, WELDABLE, RIVETABLE, AIR DRY, STRUCTURAL, ALUMINUM ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2L67-A2-2003 COPPER WIRE, SOFT OR ANNEALED ROUND, HEAVY POLYURETHANE INSULATED (SOLDERABLE), CLASS 180 °C ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2P177-A2-2003 PAINT PERFORMANCE, CHASSIS LOW LEVEL VISIBLE, 240 H SALT SPRAY RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2P178-A2-2005 PAINT PERFORMANCE, CORROSION/HEAT RESISTANT COATING, 350 DEGREES C, MAX ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSS-M2P178-A)
FORD WSK-M2P137-A2-2010 PAINT PERFORMANCE, ENGINES, AND ENGINE ACCESSORIES, 48 h SALT SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M2D462-A2-2010 THERMOPLASTIC ELASTOMER, CHLORINATED ETHYLENE [TE(PE-C)], 70 A HARDNESS, EXTERIOR ONLY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSB-M2D462-A1)
FORD WSS-M2P187-A2-2010 PAINT PERFORMANCE, WATER BASED, AUTODEPOSITED, NON VISIBLE EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2P191-A2-2010 COATING PERFORMANCE, DECORATIVE FINISH, BRIGHT METAL PARTS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2G373-A2-2008 ADHESIVE, HEM FLANGE, ALUMINUM BONDING, TWO COMPONENT 50 - 70 °C GEL POINT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSB-M2G373-A)
FORD WSS-M2F188-A2-2008 FABRIC, VINYL COATED (PVC) EXPANDED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSA-M2D451-A2-2008 HYDROGENATED NITRILE (HNBR) RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2P140-A2-2008 PAINT PERFORMANCE, ROAD WHEELS, 240 h SALT SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2P140-A1)
FORD WSS-M2C161-A2-2008 PASTE, SOLID LUBRICANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2P152-A2-2008 PAINT PERFORMANCE, LOW LEVEL VISIBLE, 120 h SALT SPRAY, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2P152-A1)
FORD WSK-M2P153-A2-2008 PAINT PERFORMANCE, CHASSIS, LOW LEVEL VISIBLE, 48 h SALT SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2P157-A2-2008 PAINT PERFORMANCE, COMMERCIAL CHASSIS, LOW LEVEL VISIBLE, 72 H SALT SPRAY - ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2P191-A2-2008 COATING PERFORMANCE, DECORATIVE FINISH, BRIGHT METAL PARTS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2P151-A2-2009 PAINT PERFORMANCE, NON-EYE VISIBLE, 48 h SALT SPRAY, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2F186-A2-2009 FABRIC, VINYL COATED, ANTI-SQUEAK FINISH ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D504-A2-2009 THERMOPLASTIC ELASTOMER, STYRENE POLYOLEFIN BLOCK COPOLYMER (TES), 49 DUROMETER A HARDNESS, INTERIOR OR EXTERIOR WEATHERABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2D504-A)
FORD ESB-M2D348-A2-2009 POLYURETHANE ELASTOMER, REACTION INJECTION MOLDED (RIM) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2D354-A2-2009 POLYURETHANE MICROCELLULAR ELASTOMER, 15% GLASS FIBER REINFORCED - RRIM - EXTERIOR - PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D338-A2-2009 FLUOROELASTOMER, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD ESE-M2D338-A1
FORD ESE-M2D347-A2-2009 SILICONE RUBBER, HIGH TEMPERATURE - LOW DUROMETER - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D364-A2-2009 SILICONE RUBBER, HIGH ELONGATION, POST CURED, LOW VOLATILE - LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESE-M2D364-A)
FORD ESP-M2D335-A2-2009 RUBBER, SILICONE-BOOT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D446-A2-2009 POLYURETHANE (PUR) FOAM, ACOUSTICAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M2D446-A1)
FORD WSD-M2D447-A2-2009 ETHYLENE/ACRYLIC (AEM) RUBBER OIL AND ACIDIC AQUEOUS CONDENSATE RESISTANT, 80 HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D448-A2-2009 POLYACRYLIC RUBBER (ACM), HOT AIR, HOT OIL AND COMPRESSION STRESS RELAXATION RESISTANT, 65 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M2D203-A2-2009 POLYURETHANE FOAM, INTEGRAL SKIN PAINTED FORMED ASSEMBLY, NON-CRITICAL AREAS, FUNCTIONAL PARTS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D381-A2-2009 THERMOPLASTIC ELASTOMER (TPE), POLYOLEFIN, EPDM RUBBER MODIFIED, MODERATE HEAT RESISTANT, FLAME RETARDANT, 82 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D386-A2-2009 SILICONE RUBBER (MQ), SELF-LUBRICATED POLYCARBONATE (PC) COMPATIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D393-A2-2009 SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, HIGH ELONGATION, 45 HARDNESS (IRHD), LONG-LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D404-A2-2009 POLYURETHANE ELASTOMER (PUR) REACTION INJECTION MOLDED (RIM), GLASS ENCAPSULATION, 90 IRHD ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2D389-A2-2009 POLYURETHANE (PUR) FOAM, OPEN CELL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2G567-A2-2009 ADHESIVE, TWO COMPONENT, SOLVENT FREE, EPOXY BASE, ADHESIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M2C143-A2-2009 LUBRICATING OIL, HIGH TEMPERATURE, P/M IMPREGNATING, THICKENED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D420-A2-2009 RUBBER, POLYCHLOROPRENE (CR) LOW TEMPERATURE FLEXIBLE, 60 IRHD HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSE-M2C909-A2-2009 OIL, ENGINE, ILSAC GF-1, INITIAL FILL (FFV), SAE 10W-30 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSE-M2C909-A1)
FORD WSE-M2D418-A2-2009 SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, OIL GROMMET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D463-A2-2009 HYDROGENATED NITRILE BUTADIENE RUBBER (HNBR) SUPERIOR COMPRESSION SET, REFRIGERANT AND OIL RESISTANT O-RINGS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSH-M2D463-A)
FORD WSS-M2D475-A2-2009 HYDROGENATED ACRYLONITRILE BUTADIENE (HNBR) O-RING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D488-A2-2009 SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 50 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D489-A2-2009 SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D498-A2-2009 POLYURETHANE FOAM, OPEN CELL - RETICULATED, 18 CELLS/10 MM ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2D498-A1
FORD WSS-M2D500-A2-2009 POLYURETHANE FOAM, CLOSED CELL, HIGH TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C910-A2-2009 OIL, ENGINE, ILSAC GF-2, INITIAL FILL, SAE 10W-30 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2C910-A1)
FORD WSS-M2C923-A2-2009 OIL, ENGINE, INITIAL FILL, API SJ/CF AND ACEA A3/B3, SAE 5W-40 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C926-A2-2009 OIL, ENGINE, INITIAL AND SERVICE FILL SAE 5W-50 ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2C926-A)
FORD ESB-M2A83-B2-2010 ALUMINUM ALLOY, EXTERIOR, ORNAMENTATION ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESB-M2A83-B1)
FORD ESF-M2L61-A2-2010 WIRE, ALUMINUM, 1.0% SILICON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2L69-A2-2010 WIRE, ALUMINUM, 99.99% PURITY ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D498-A2-2010 POLYURETHANE FOAM, OPEN CELL - RETICULATED, 18 CELLS/10 MM ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2D338-A2-2010 FLUOROELASTOMER, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESE-M2D338-A1)
FORD WSP-M2D373-A2-2010 ETHYLENE/ACRYLIC (AEM) RUBBER LOW COMPRESSION SET, OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2F207-A2-2010 FLEXIBLE COVERSTOCK, EXPANDED POLYVINYL CHLORIDE (PVC), POLYESTER KNITTED SPACER FABRIC BACKED, COATED WITH PROTEIN TOP COAT FINISH ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M2C31-A2-2010 OIL, COMPRESSOR - REFRIGERATION ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2C938-A2-2010 FLUID, AUTOMATIC TRANSMISSION OPTIMIZED FOR ANTI SQUAWK PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2D457-A2-2010 POLYACRYLIC (ACM) RUBBER, ROTATING SHAFT OIL SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G348-A2-2011 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSK-M2G348-A1
FORD WSK-M2G350-A2-2011 ADHESIVES, ANAEROBIC, (AN) SEALING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSS-M2F188-A2-2011 FABRIC, VINYL COATED (PVC) EXPANDED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2F173-A2-2015 VINYL FILM, (PVC), UNSUPPORTED BI-AXIAL ORIENTATION TYPE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M2F173-A)
FORD WSD-M2F169-A2-2014 VINYL, UNSUPPORTED, EXPANDED, 1.3 mm ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSD-M2F169-A1)
FORD WSS-M2F210-A2-2012 FABRIC, VINYL (PVC) COATED, POLYESTER BACKED, FLOOR MAT BINDING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2F178-A2-2013 FABRIC, VINYL COATED, ANTI-SQUEAK FINISH ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2F178-A1)
FORD WSB-M2F183-A2-2014 FABRIC, VINYL COATED (PVC), CALENDERED/EXPANDED, MICROPERFORATED, LOW PRESSURE FORMABLE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSB-M2F183-A1)
FORD WSS-M2F188-A2-2014 FABRIC, VINYL COATED (PVC) EXPANDED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2F210-A2-2020 FABRIC, VINYL (PVC) COATED, POLYESTER BACKED, FLOOR MAT BINDING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2F219-A2-2021 FABRIC, VINYL (PVC) COATED, POLYESTER KNITTED FABRIC, STEERING WHEEL/SHIFT KNOBS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2F219-A1)
FORD WSS-M2P185-A2-2015 PAINT PERFORMANCE, ENGINES, METALLIC SUBSTRATES, HIGH PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2P185-A1)
FORD WSD-M2D243-A2-2014 POLYURETHANE (PUR) FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M2G383-A2-2014 TAPE ADHESIVE, EPOXY BASED, STRUCTURAL, MEDIUM-EXPANDING HIGH TEMPERATURE HEAT CURING, WELDABLE, FLOW WASH RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSB-M2G383-A1)
FORD WSB-M2G383-A2-2021 TAPE ADHESIVE, EPOXY BASED, STRUCTURAL, MEDIUM-EXPANDING HIGH TEMPERATURE HEAT CURING, WELDABLE, FLOW WASH RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSB-M2G383-A1)
FORD WSK-M2G348-A2-2021 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G348-A2-2013 ADHESIVES, ANAEROBIC, (AN) GASKETING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A1)
FORD WSK-M2G354-A2-2014 ADHESIVES, ANAEROBIC, PRE-APPLIED THREADLOCKING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G354-A1)
FORD WSB-M2G112-A2-2014 ADHESIVE, NITRILE BASE, FAST TACK, SOLVENT RELEASE TYPE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSF-M2G339-A2-2015 ADHESIVE, EPOXY, THERMAL CURE, SURFACE MOUNTED COMPONENTS ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSF-M2G339-A1)
FORD ESK-M2G367-A2-2015 ADHESIVE, POLYURETHANE, TWO COMPONENT, WATER BORNE, HARDENER ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD ESK-M2G367-A1)
FORD ESF-M2G156-A2-2014 ADHESIVE, EPOXY, ONE PART, THIXOTROPIC ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSF-M2G331-A2-2015 ADHESIVE, EPOXY - ONE COMPONENT - HEAT CURING - STRUCTURAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2G385-A2-2015 ADHESIVE, TWO COMPONENT SILICONE, THERMALLY CONDUCTIVE, HIGH DIELECTRIC STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESK-M2G264-A2-2014 ADHESIVE, PRIMER, ACRYLATE BASED, FOR ADHESIVE TAPE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSF-M2G375-A2-2015 ADHESIVE, HOT MELT, NON-CORROSIVE, EVA-BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESK-M2G365-A2-2015 ADHESIVE, POLYURETHANE, TWO COMPONENT, SOLVENT FREE, METAL TO E-COATED METAL, ISOCYANATE COMPONENT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2G350-A2-2021 ADHESIVES, ANAEROBIC, (AN) SEALING ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSK-M2G348-A2)
FORD WSS-M2C161-A2-2012 PASTE, SOLID LUBRICANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A123-B2-2014 ALUMINUM ALLOY (A356-T6) MODIFIED, CAST WHEEL, HIGH STRENGTH ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A123-B1)
FORD ESF-M2L25-A2-2014 COPPER WIRE, SOFT ROUND, POLYURETHANE INSULATION WITH POLYAMIDE OVERCOAT, 155 °C ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2F208-A2-2014 FLEXIBLE COVERSTOCK, THERMOPLASTIC OLEFIN (TPO), OPEN CELL POLYURETHANE FOAM BACKED ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2F208-A1)
FORD WSS-M2C218-A2-2021 DUAL CLUTCH TRANSMISSION FLUID, LOW VISCOSITY, YELLOW ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2C218-A1)
FORD WSS-M2D517-A2-2014 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 50 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D517-A2-2020 THERMOPLASTIC ELASTOMER (TPS) STYRENE BLOCK COPOLYMER, MEDIUM HEAT RESISTANT 50 DUROMETER A HARDNESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2D379-A2-2020 THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED MODERATE HEAT RESISTANT 69 DUROMETER A HARDNESS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2D516-A2-2021 THERMOPLASTIC ELASTOMER (TPS), STYRENE BLOCK COPOLYMER, 50 DUROMETER, UNDERHOOD ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2D516-A1)
FORD WSE-M2D470-A2-2013 DUCT, CPE, CHLORINATED POLYETHYLENE, MOLDED AIR INTAKE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSE-M2D470-A1)
FORD ESA-M2A62-A-2003 ALUMINUM ALLOYS, BRAKE PISTON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2A123-A-2003 ALUMINUM ALLOY (AA 356- T6) MODIFIED, CAST WHEEL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2A124-A-2003 ALUMINUM ALLOY (AA 6061- T6) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M2A125-A-2003 ALUMINUM, EXTRUSION AND SHEET ALLOY (SAE AA 7129-T6) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2A58-A-2003 BRASS, STRIP (SAE CA 260) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2A114-A-2005 ALUMINUM ALLOYS - FREE MACHINING - GENERAL PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESE-M2A136-A-2003 ALUMINUM, ALCLAD WIRE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M2A106-A-2003 ALUMINUM TUBING-DRAWN-FULLY ANNEALED-SEAMLESS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M2A116-A-2006 BRASS STRIP, ARSENICAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESH-M2A141-A-2003 ALUMINUM TUBING, EXTRUDED, TEMPERED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD M1B2-A-2000 SOAP - HAND, POWDERED

British Standards Institution (BSI), m2a m2m

2M 45 Pt.2-1986 Aircraft tyres and rims. Methods of test for tyres
BS 2M 52:1989 Method for impulse testing of hydraulic hose, tubing and fitting assemblies for aerospace fluid systems
BS 2M 51:1989 Classification for pressure and temperature for fluid systems and components
BS 2M 47:1990 Specification for retreading of cross ply tyres for aircraft
BS 2M 50:1986 Specification for clearance dimensions for tripod jacks for aircraft
BS 2M 49:1997 Aircraft. Hydraulic components. Marking to indicate fluid for which component is approved
BS 2M 54:1991 Specification for temperature control in the heat treatment of metals
BS 2M 41:1977 Methods of numbering propulsion units and components and describing their direction of rotation
BS 2M 53:1997 Aircraft. Fluid systems. Thermal shock testing of piping and fittings
BS 2M 46:1986 Specification for outside diameters and thicknesses of tubing
2M 46-1986 Specification for outside diameters and thicknesses of tubing
2M 50-1986 Specification for clearance dimensions for tripod jacks for aircraft
2M 59-1993 Specification for interface of metric couplings, 24 cone, for aerospace fluid systems
2M 60-1993 Specification for separable tube fittings, 24 cone, for aerospace fluid systems
2M 63-1993 Specification for dimensions of aerospace fluid system port connection, seal and fitting end
BS 2M 59:1993 Specification for interface of metric couplings, 24 cone, for aerospace fluid systems
BS 2M 63:1993 Specification for dimensions of aerospace fluid system port connection, seal and fitting end
2M 41-1977 Methods of numbering propulsion units and components and describing their direction of rotation
2M 51-1989 Classification for pressure and temperature for fluid systems and components
2M 52-1989 Method for impulse testing of hydraulic hose, tubing and fitting assemblies for aerospace fluid systems

Korean Agency for Technology and Standards (KATS), m2a m2m

KS M 3408-2-2013 Plastics piping systems for water supply ?; Polyethylene(PE) ?; Part 2: Pipes
KS M 3521-2-2010 Structured-wall polypropylene(PP) pipes coupler for non-pressure underground drainage and sewerage－Part 2：Fusion coupler
KS M 3604-2-2007 Recycled polyethylene construction parts of water closet wastes disposal facilities-Part 2:Assembly type
KS M 2740-2-2005 Petroleum waxes-Determination of oil content
KS M 3200-2-2014 Plastics — Polyketone(PK) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
KS M 3500-2-2015 Structured-wall polyethylene(PE) pipes for non-pressure underground drainage and sewerage — Part 2: Multi-wall pipe
KS M 3700-2-2016 Structured-wall polypropylene(PP) pipes for non-pressure underground drainage and sewerage－Part 2：Multi-wall pipe
KS M 1998-2-2005 Determination of the emission rate of formaldehyde and volatile organic compounds in building interior products-Part 2:Small chamber method
KS M 3511-2-2012 Structured-wall polyethylene(PE) pipes coupler for non-pressure underground drainage and sewerage－Part 2：Fusion coupler
KS M 1071-2-2007 Determination of boiling temperature for chemical agents
KS M 3408-2-2008 Plastics piping systems for water supply-Polyethylene(PE)-Part 2:Pipes
KS M 3550-2-2011 Unplasticized polyvinyl chloride profile for spiral wound renovation of sewer piping system
KS M 3500-2-2009 Structured-wall polyethylene(PE) pipes for non-pressure underground drainage and sewerage-Part 2:Multi-wall pipe
KS M 3700-2-2009 Structured-wall polypropylene(PP) pipes for non-pressure underground drainage and sewerage-Part 2:Multi-wall pipe
KS M 3604-2-2014 Recycled polyethylene construction parts of water closet wastes disposal facilities — Part 2: Assembly type
KS M 1998-2-2014 Determination of the emission rate of formaldehyde and volatile organic compounds in building interior products－Part 2：Small chamber method
KS M 1071-2-2017 Determination of boiling temperature for chemical agents
KS M 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS M 3408-2-2015 Plastics piping systems for water supply - Polyethylene(PE) - Part 2: Pipes
KS M 1993-2-2020 Determination of emissive organic compounds in solid and/or semi-solid products — Part 2: Formaldehyde and other carbonyl compounds — High performance liquid chromatography
KS M 3408-2-2020 Plastics piping systems for water supply — Polyethylene(PE) — Part 2: Pipes
KS M 3511-2-2017 Structured-wall polyethylene(PE) pipes coupler for non-pressure underground drainage and sewerage－Part 2：Fusion coupler
KS M 3550-2-2020 Unplasticized polyvinyl chloride profile for spiral wound renovation of sewer piping system
KS M 3604-2-2019 Recycled polyethylene construction parts of water closet wastes disposal facilities — Part 2: Assembly type
KS M ISO 10307-2:2011 Petroleum products-Total sediment in residual fuel oils-Part 2:Determination using standard procedures for ageing
KS M ISO 10349-2:2002 Photography－Photographic－grade chemicals－Test methods－Part 2：Determination of matter insoluble in water
KS M ISO 10350-2:2012 Plastics－Acquisition and presentation of comparable single-point data－Part 2：Long-fibre-reinforced plastics
KS M ISO 10366-2:2006 Plastics-Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 1043-2:2013 Plastics — Symbols and abbreviated terms-Part 2: Fillers and reinforcing materials
KS M ISO 4630-2:2010 Clear liquids－Estimation of colour by the Gardner colour scale－Part 2：Spectrophotometric method
KS M ISO 13000-2:2013 Plastics ㅡ Polytetrafluoroethylene (PTFE) semi-finished products ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 13357-2:2003 Petroleum products－Determination of the filterability oflubricating oils－Part 2：Procedure for dry oils
KS M ISO 1874-2:2008 Plastics-Polyamide(PA) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 1924-2:2009 Paper and board－Determination of tensile properties－Part 2：Constant rate of elongation method(20 mm/min)
KS M ISO 4661-2:2009 Rubber, vulcanized-Preparation of samples and test pieces-Part 2:Chemical tests
KS M ISO 2039-2:2008 Plastics－Determination of hardness－Part 2：Rockwell hardness
KS M ISO 3262-2:2007 Extenders for paints－Specfications and methods of test－Part 2：Barytes(natural barium sulfate)
KS M ISO 4894-2:2011 Plastics-Styrene/Acrylonitirile(SAN) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 5263-2:2009 Pulps-Laboratory wet disintegration-Part 2:Disintegration of mechanical pulps at 20 ℃
KS M ISO 5264-2:2009 Pulps-Laboratory beating-Part 2:PFI mill method
KS M ISO 3386-2:2013 Flexible cellular polymeric materials-Determination of stress-strain characteristics in compression-Part 2:High-density materials
KS M ISO 527-2:2013 Plastics ㅡ Determination of tensile properties ㅡ Part 2: Test conditions for moulding and extrusion plastics
KS M ISO 14526-2:2007 Plastics-Phenolic powder moulding compounds(PF-PMCs)-Part 2:Preparation of test specimens and determination of properties
KS M ISO 14527-2:2008 Plastics－Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds(UF- and UF/MF-PMCs)－Part 2：Preparation of test specimens and determination of properties
KS M ISO 34-2:2009 Rubber, vulcanized or thermoplastic-Determination of tear strength-Part 2:Small(Delft) test pieces
KS M ISO 3451-2:2007 Plastics－Determination of ash－Part 2：Poly(alkylene terephthalate) materials
KS M ISO 14529-2:2006 Plastics-Melamine/phenolic powder moulding compounds(MP-PMCs)-Part 2:Preparation of test specimens and determination of properties
KS M ISO 14530-2:2006 Plastics-Unsaturated-polyester powder moulding compounds(UP-PMCs)-Part 2:Preparation of test specimens and determination of properties
KS M ISO 14663-2:2002 Plastics-Ethylene/vinyl alcohol(EVOH) copolymer moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 21227-2:2012 Paints and varnishes－Evaluation of defects on coated surfaces using optical imaging－Part 2：Evaluation procedure for multi-impact stone-chipping test
KS M ISO 21268-2:2008 Soil quality－Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials－Part 2：Batch test using a liquid to solid ratio of 10 L/kg dry matter
KS M ISO 11125-2:2002 Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2 : Determination of particle size distribution
KS M ISO 15106-2:2008 Plastics-Film and sheeting-Determination of water vapour transmission rate-Part 2:Infrared detection sensor method
KS M ISO 22391-2:2010 Plastics piping systems for hot and cold water installations-Polyethylene of raised temperature resistance(PE-RT)-Part 2:Pipes
KS M ISO 3673-2:2012 Plastics-Epoxy resins-Part 2:Preparation of specimens and determination of properties
KS M ISO 3673-2:2013 Plastics — Epoxy resins-Part 2: Preparation of specimens and determination of properties
KS M ISO 15181-2:2008 Paints and varnishes-Determination of release rate of biocides from antifouling paints-Part 2:Determination of copper-ion concentration in the extract and calculation of the release rate
KS M ISO 15181-2:2013 Paints and varnishes — Determination of release rate of biocides from antifouling paints — Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
KS M ISO 1518-2:2013 Paints and varnishes-Determination of scratch resistance -Part 2: Variable-loading method
KS M ISO 2286-2:2012 Rubber- or plastics-coated fabrics-Determination of roll characteristics-Part 2:Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
KS M ISO 3856-2:2007 Paints and varnishes－Determination of “soluble” metal content－Part 2：Determination of antimony content－Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method
KS M ISO 11193-2:2009 Single-use medical examination gloves-Part 2:Specification for gloves made from poly(vinyl chloride)
KS M ISO 15379-2:2010 Carbonaceous materials for the production of aluminium-Cathode block materials-Part 2:Determination of the expansion due to sodium penetration without application of pressure
KS M ISO 11357-2:2003 Plastics&##8722;Differential scanning calorimetry(DSC)-Part 2:Determination of glass transition temperature
KS M ISO 11359-2:2002 Plastics－Thermomechanical analysis(TMA)－Part 2：Determination of coefficient of linear thermal expansion and glass transition temperature
KS M ISO 15876-2:2013 Plastics piping systems for hot and cold water installations ㅡ Polybutylene (PB) ㅡ Part 2: Pipes
KS M ISO 24698-2:2010 Rubber, raw－Determination of bound acrylonitrile content in acrylonitrile-butadiene rubber(NBR)－Part 2：Kjeldahl method
KS M ISO 2470-2:2009 Paper, board and pulps－Measurement of diffuse blue reflectance factor－Part 2：Outdoor daylight conditions(D65 brightness)
KS M ISO 4046-2:2004 Paper, board, pulps and related terms－Vocabulary－Part 2：Pulping terminology
KS M ISO 11403-2:2013 Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
KS M ISO 11542-2:2011 Plastics-Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 1163-2:2006 Plastics - Unplasticized poly(vinyl chloride)(PVC-U) moulding and extrusion materials - Part 2 : Preparation of test specimens and determination of properties
KS M ISO 16065-2:2009 Pulps-Determination of fiber length by automated optical analysis-Part 2:Unpolarized light method
KS M ISO 1622-2:2008 Plastics－Polystyrene(PS) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 16532-2:2009 Paper and board－Determination of grease resistance－Part 2：Surface repellency test
KS M ISO 26082-2:2013 Leather ㅡ Physical and mechanical tests methods for the determination of soiling ㅡ Part 2: Tumbling method
KS M ISO 4263-2:2004 Petroleum and related products－Determination of the ageing behaviour of inhibited oils and fluids－TOST test－Part 2：Procedure for category HFC hydraulic fluids
KS M ISO 4266-2:2003 Petroleum and liquid petroleum products-Measurement of level and temperature in storage tanks by automatic methods-Part 2:Measurement of level in marine vessels
KS M ISO 11890-2:2012 Paints and varnishes-Determination of volatile organic compound(VOC) content-Part 2:Gas-chromatographic method
KS M ISO 11907-2:2004 Plastics-Smoke generation-Determination of the corrosivity of fire effluents-Part 2:Static method
KS M ISO 11997-2:2007 Paints and varnishes-Determination of resistance to cyclic corrosion conditions-Part 2:Wet(salt fog)/dry/humidity/UV light
KS M ISO 1209-2:2012 Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
KS M ISO 28199-2:2012 Paints and varnishes－Evaluation of properties of coating systems related to the application process－Part 2：Colour stability, process hiding power, re-dissolving,overspray absorption, wetting, surface texture and mottling
KS M ISO 458-2:2003 Plastics－Determination of stiffness in torsion of flexible materials－Part 2：Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
KS M ISO 4586-2:2013 High-pressure decorative laminates — Sheets made from thermosetting resins — Part 2: Determination of properties
KS M ISO 12917-2:2003 Petroleum and liquid petroleum products-Calibration of horizontal cylindrical tanks-Part 2:Internal electro-optical distance-ranging method
KS M ISO 12944-2:2008 Paints and varnishes－Corrosion protection of steel structures by protective paint systems－Part 2：Classification of environments
KS M ISO 179-2:2012 Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS M ISO 2884-2:2011 Paints and varnishes－Determination of viscosity using rotary viscometers－Part 2：Disc or ball viscometer operated at a specified speed
KS M ISO 2897-2:2011 Plastics-Impact-resistant polystyrene(PS-I)moulding and extrusion materials-Part 2:Preparation of test specimens and determiniation of properties
KS M ISO 2898-2:2012 Plastics-Plasticized poly(vinyl chloride)(PVC-P) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 4613-2:2011 Plastics-Ethylene/vinyl acetate(E/VAC) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 12985-2:2004 Carbonaceous materials used in the production of aluminium-Baked anodes and cathode blocks-Part 2:Determination of apparent density and of open porosity using a hydrostatic method
KS M ISO 12986-2:2011 Carbonaceous materials used in the production of aluminium-Prebaked anodes and cathode blocks-Part 2:Determination of flexural strength by the foru-point method
KS M ISO 1873-2:2011 Plastics-Polypropylene(PP) moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties
KS M ISO 9184-2:2007 Paper, board and pulps-Fibre furnish analysis-Part 2:Staining guide
KS M ISO 7482-2:2002 Raw goat skins－Part 2：Guidelines for grading on the basis of mass and size
KS M ISO 7507-2:2003 Petroleum and liquid petroleum products－Calibration of vertical cylindrical tanks－Part 2：Optical－reference－line method
KS M ISO 75-2:2003 Plastics-Determination of temperature of deflection under load-Part 2:Plastics and ebonite
KS M ISO 7619-2:2011 Rubber, vulcanized or thermoplastic-Determination of indentation hardness-Part 2:IRHD pocket meter method
KS M ISO 7622-2:2002 Steel cord conveyor belts－Longitudinal traction test－Part 2：Measurement of tensile strength
KS M ISO 7724-2:2007 Paints and varnishes－Colorimetry－Part 2：Colour measurement
KS M ISO 9988-2:2012 Plastics－Polyoxymethylene(POM) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 7792-2:2013 Plastics ㅡ Thermoplastic polyester(TP) moulding and extrusion materials ㅡ Part 2: Preparation of test specimens and determination of properties
KS M ISO 78-2:2011 Chemistry-Layouts for standards-Part 2:Method of chemical analysis
KS M ISO 5470-2:2012 Rubber- or plastics-coated fabrics－Determination of abrasion resistance－Part 2：Martindale abrader
KS M ISO 5631-2:2011 Paper and board-Determination of colour by diffuse reflectance-Part 2:Outdoor daylight conditions (D65/10°)
KS M ISO 5659-2:2012 Plastics-Smoke generation-Part 2:Determination of optical density by a single-chamber test
KS M ISO 5794-2:2012 Rubber compounding ingredients－Silica, precipitated, hydrated－Part 2：Evaluation procedures in styrene-butadiene rubber
KS M ISO 815-2:2010 Rubber, vulcanized or thermoplastic-Determination of compression set-Part 2:At low temperatures
KS M ISO 6225-2:2009 Rubber, raw, natural-Determination of castor oil content-Part 2:Determination of total ricinoleic acid content by gas chromatography
KS M ISO 8254-2:2004 Paper and board-Measurement of specular gloss-Part 2:75 ° gloss with a parallel beam, DIN method
KS M ISO 8257-2:2002 Plastics－Poly(methyl methacrylate) (PMMA) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 6271-2:2010 Clear liquids-Estimation of colour by the platinum-cobalt scale-Part 2:Spectrophotometric method
KS M ISO 6272-2:2008 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 2:Falling-weight test, small-area indenter
KS M ISO 6272-2:2013 Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6293-2:2003 Petroleum products－Determination of saponification number－Part 2：Potentiometric titration method
KS M ISO 6353-2:2002 Reagents for chemical analysis－Part 2：Specifications－First series
KS M ISO 8501-2:2008 Preparation of steel substrates before application of paints and related products-Visual assessment of surface cleanliness-Part 2:Preparation grades of previously coated steel substrates after localized removal of previous coatings
KS M ISO 8502-2:2012 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 2:Laboratory determination of chloride on cleaned surfaces
KS M ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 2：Method for the grading of surface profile of abrasive blast-cleaned steel－Comparator procedure
KS M ISO 6588-2:2006 Paper, board and pulps-Determination of pH of aqueous extracts-Part 2:Hot extraction
KS M ISO 6721-2:2008 Plastics-Determination of dynamic mechanical properties-Part 2:Torsion-pendulum method
KS M ISO 8504-2:2012 Preparation of steel substrates before application of paints and related products-Surface preparation methods-Part 2:Abrasive blast-cleaning
KS M ISO 6743-2:2008 Lubricants, industrial oils and related products(class L)-Clasification-Part 2:Family F(Spindle bearings,bearings and associated clutches)
KS M ISO 877-2:2012 Plastics-Methods of exposure to solar radiation-Part 2:Direct weathering and exposure behind window glass
KS M ISO 8791-2:2008 Paper and board-Determination of roughness/smoothness (air leak methods)-Part 2:Bendtsen method
KS M ISO 8986-2:2013 PLASTIC — POLYBUTYLENE(PB) MOULDING AND EXTRUSION MATERIALS–PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 899-2:2012 Plastics-Determination of creep behavior-Part 2:Flexural creep by three-point loading
KS M ISO 9091-2:2003 Refrigerated light hydrocarbon fluids-Calibration of spherical tanks in ships-Part 2:Triangulation measurement
KS M ISO 9117-2:2012 Paints and varnishes-Drying tests-Part 2:Pressure test for stackability
KS M ISO 16773-2:2013 Paints and varnishes ㅡ Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens ㅡ Part 2: Terms and definitions
KS M ISO 5403-2:2013 Leather ㅡ Determination of Water resistance of flexible leather ㅡ Part 2: Repeated angular compression(Maeser)
KS M ISO 16276-2:2013 Corrosion protection of steel structures by protective paint systems ㅡ Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating ㅡ Part 2: Cross-cut testing and X-cut testing
KS M ISO 6721-2:2013 Plastics ㅡ Determination of dynamic mechanical properties ㅡ Part 2: Torsion-pendulum method
KS M ISO 1874-2:2013 PLASTIC — POLYAMIDE(PA) MOULDING AND EXTRUSION MATERIALS — PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
KS M ISO 75-2:2013 Plastics — Determination of temperature of deflection under load–Part 3: Plastics and ebonite
KS M ISO 4618-2:2012 Paints and varnishes－Terms and definitions for coating materials－Part 2：Special terms relating to paint characteristics and properties
KS M ISO 5751-2:2012 Motorcycle tyres and rims(metric series)--Part 2：Tyre dimensions and load--carrying capacities
KS M ISO 22391-2:2015 Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance(PE-RT) — Part 2: Pipes

AT-ON, m2a m2m

ONORM M 7826-2-2000 Soldering and brazing of copper pipes used for installation purposes - Performance and testing of soldered and brazed joints
ONORM M 7755-2-2000 Electrically driven heat pumps - Special requirements for heat pump-systems using groundwater, surface water or soil
ONORM M 9115-2-2001 Machine tools - Acceptance conditions for single column milling machines with knee of variable height, with vertical spindle
ONORM M 3042-2-2002 Qualification and certification of NDT personnel - Part 2: Sectors and authorization of NDT personnel
ONORM M 1346-2-1995 Control of measuring and test equipment - Testing instruction for ring gauges and setting ring gauges
ONORM M 6794-2-1997 Pinion-type cutters for cylindrical gears - Tolerances and permissible deviations
ONORM M 7387-2-1997 Central gas distribution plants - Gas stations with stationary pressure vessels on ground level
ONORM M 7810-2-1992 General tolerances for welding constructions - Form and position
ONORM M 6781-2-1996 Master gears for checking of cylindrical gears - Arbors
ONORM M 6603-2-1997 Water analysis - Determination of potassium and sodium by flame emission spectrometry
ONORM M 9031-2-1998 Machine tools - Acceptance conditions for internal cylindrical grinding machines with horizontal spindle - Machines having a surfacing wheel slide
ONORM M 6745-2-1993 Calculation of load capacity of bevel gears without offset - Surface durability (pitting)
ONORM M 6791-2-1997 Gear hobs for cylindrical gears - Tolerances and permissible deviations for single-start gear hobs
ONORM M 9033-2-1999 Machine tools - Acceptance conditions for surface grinding machines with vertical grinding wheel spindle and round table
ONORM M 1341-2-1995 Control of measuring and test equipment — Testtng Instruction for vemier callipers for depht measurement
ONORM M 6760-2-1996 Drawing data for toothings - Straight bevel gears
ONORM M 7812-2-1996 Quality assurance of welding - Quality classes
ONORM M 9032-2-1998 Machine tools - Acceptance conditions for surface grinding machines with horizontal grinding wheel spindle and round table
ONORM M 7603-2-1993 Ventilation-plants for garages Installations de Ventilation pour garages
ONORM M 7510-2-1996 Checking of heating Systems - Type of fuel: fuel oils or fuel gases - Part 2: Guiding values and working sheets for fireplaces up to 2 MW nominal thermal Output
ONORM M 1342-2-1994 Control of measuring and test equipment - Testing Instruction for micrometer depth gauges
ONORM M 9630-2-1996 Mechanical equipment on stages - Upper stage machinery
ONORM M 7535-2-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the C02-concentration - Requirements, testing, marking of conformity
ONORM M 1620-2-1994 Bolted connections - Determination of coefficients of friction when tightening
ONORM M 1157-2-1994 Testing methods for foundry sands - Determination of fines content
ONORM M 5861-2-1994 Manual determination of particle concentrations in fluid gases - Gravimetrie method - Special requirements regarding measurement techniques
ONORM M 7390-2-1997 Gas cylinder valves for test pressures up to max. 300 bar - Types, dimensions, connections, threads (includes also corrigendum 1997)
ONORM M 6230-2-1998 Natural waters for swimming purposes - Guidelines for sampling from natural and artificial surface waters for microbiological analysis to determine the suitability for swimming purposes
ONORM M 6770-2-2000 Accuracy of cylindrical gears - Deviations of profile, helix and pitch
ONORM M 6778-2-2000 Accuracy of cylindrical worm gears - Tolerances for individual errors

American Society of Mechanical Engineers (ASME), m2a m2m

ASME HST-2M-1989 Performance standard for hand chain manually operated chain hoists

Society of Motion Picture and Television Engineers (SMPTE), m2a m2m

SMPTE 12M-2-2008 Television ?Transmission of Time Code in the Ancillary Data Space [Superseded: SMPTE 12M, SMPTE RP 159, SMPTE RP 164, SMPTE RP 188]

International Electrotechnical Commission (IEC), m2a m2m

IEC 60061-2M:1994 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders; Supplement 12 to IEC 60061-2 (1969)
IEC 60147-2M:1980 Essential ratings and characteristics of semiconductor devices and general principles of measuring methods. Part 2 : General principles of measuring methods.
IEC 60191-2M:1983 Mechanical standardization of semiconductor devices. Part 2 : Dimensions.

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, m2a m2m

REPORT M.914-2-1990 EFFICIENT USE OF THE RADIO SPECTRUM BY RADAR STATIONS IN THE RADIODETERMINATION SERVICE
REPORT M.904-2-1990 AUTOMATIC DETERMINATION OF LOCATION AND GUIDANCE IN THE LAND MOBILE SERVICE
REPORT M.2039-2-2010 Characteristics of terrestrial IMT-2000 systems for frequency sharing/ interference analyses
REPORT M.927-2-1990 GENERAL CONSIDERATIONS RELATIVE TO HARMFUL INTERFERENCE FROM THE VIEWPOINT OF THE AERONAUTICAL MOBILE SERVICES AND THE AERONAUTICAL RADIONAVIGATION SERVICE
REPORT M.929-2-1990 Compatibility between the broadcasting service in the band of about 87-108 MHz and the aeronautical services in the band 108-136 MHz
REPORT M.901-2-1990 FREQUENCY ASSIGNMENT METHODS FOR TRUNKED MOBILE RADIO SYSTEMS
REPORT M.778-2-1990 Wireless communication systems for persons with impaired hearing
REPORT M.766-2-1990 Feasibility of frequency sharing between the GPS and other services

American National Standards Institute （ANSI), m2a m2m

ANSI/INFOCOMM 2M-2010 Audiovisual Systems Design and Coordination Components

AENOR, m2a m2m

UNE 21814/2M:1993 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES. GENERAL REQUIREMENTS.
UNE 21852/2M:1996 CAST ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR.
UNE 60402-2:2008/2M:2013 Gaseous fuels. Pressure regulator with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,05 bar. Part 2: Regulator with a MOP greater than 150 mbar, with an incorporated minimum low pressure cut-off safety valve, with a maximum pressure safety valve an

Japanese Industrial Standards Committee (JISC), m2a m2m

JIS M 8514 ERRATUM 2:2004 ERRATUM
JIS M 8219-2:2012 Iron ores -- Determination of titanium -- Part 2: Diantipyrylmethane spectrophotometric method
JIS M 8712 AMD 2:2017 Iron ores -- Determination of tumble strength (Amendment 2)
JIS M 8205 ERRATUM 2:2004 ERRATUM
JIS M 8215-2:2006 Iron ores -- Determination of manganese content -- Periodate spectrophotometric method
JIS M 8221-2:2018 Iron ores -- Determination of calcium -- Part 2: Disodium dihydrogen ethylenediamine tetraacetate titrimetric determination after separation of co-existed elements
JIS M 8222-2:2018 Iron ores -- Determination of magnesium -- Part 2: Flame atomic absorption spectrometric method

Consultative Committee for Space Data Systems (CCSDS), m2a m2m

CCSDS 650.0-M-2-2012 Reference model for an open archival information sytem (OAIS)
CCSDS 652.1-M-2-2014 Requirements for bodies providing audit and certification of candidate trustworthy digital repositories

US-CLSI, m2a m2m

CLSI M24-A2-2011 Susceptibility Testing of Mycobacteria, Nocardiae, and Other Aerobic Actinomycetes; Approved Standard- Second Edition

API - American Petroleum Institute, m2a m2m

API RP 2M-1980 RECOMMENDED PRACTICE for QUALIFICATION TESTING of STEEL ANCHOR DESIGNS FOR FLOATING STRUCTURES (First Edition)
API RP 2M-1996 Recommended Practice for Qualification Testing of Steel Anchor Designs for Floating Structures

Association Francaise de Normalisation, m2a m2m

M82-659-2:1988 Mining equipment. Lubricants, industrial oils and related products. Class L. Fire resistant fluids.

ZA-SANS, m2a m2m

SANS 10120-2 M:1996 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2: Project specification Section M: Roads (general)
SANS 10120M-2:1996 Code of practice for use with standardized specifications for civil engineering construction and contract documents Part 2 : Project specification, Portion 2 Section M Contents

KR-KS, m2a m2m

KS M 3408-2-2023 Plastics piping systems for water supply — Polyethylene(PE) — Part 2: Pipes
KS M 3500-2-2023 Structured-wall polyethylene(PE) pipes for non-pressure underground drainage and sewerage — Part 2: Multi-wall pipe

未注明发布机构, m2a m2m

MIL-M-55554A NOT 2
VDE 0720-2M-1971*DIN VDE 0720-2M:1971
MIL-M-49275 1 NOT 2
NCCLS M37-A2-2002
NCCLS M31-A2-2002
CLSI M40-A2-2014
CLSI M06-A2-2006
CLSI M35-A2-2008
CAN 2-75.1-M77
CAN 2-51.32-M77
CLSI M28-A2-2005
ASME MFC-2M-1983 Uncertainty in liquid flow measurements in sealed pipes
JIS M 8210-2:2023 Iron ores -- Determination of cobalt -- Part 2: Flame atomic absorption spectrometric method
JIS M 8230-2:2023 Iron ores -- Determination of bismuth -- Part 2: Flame atomic absorption spectrometric method after separation of iron

The American Road & Transportation Builders Association, m2a m2m

AASHTO M 36-16 (2)

American Society for Testing and Materials (ASTM), m2a m2m

ASTM G2/G2M-06 Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680176;F [360176;C]or in Steam at 750176;F [400176;C]
ASTM G2/G2M-19 Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)