ZH
RU
ES
Comparison of two measurement methods
Comparison of two measurement methods, Total:105 items.
In the international standard classification, Comparison of two measurement methods involves: Microbiology, Paper and board, Thermodynamics and temperature measurements, Water quality, Air quality, Construction materials, Ergonomics, Acoustics and acoustic measurements, Integrated circuits. Microelectronics, Analytical chemistry, Occupational safety. Industrial hygiene, Protection against fire, Audio, video and audiovisual engineering, Measurement of force, weight and pressure, Vacuum technology, Paint ingredients, Plastics, Geology. Meteorology. Hydrology.
AENOR, Comparison of two measurement methods
- UNE 66057:1978 COMPARISON OF TWO MEANS IN THE CASE OF PAIRED OBSERVATIONS
- UNE-EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO 17994:2014)
- UNE-EN 61094-5:2002 Measurement microphones -- Part 5: Methods for pressure calibration of working standard microphones by comparison.
- UNE-EN ISO 787-25:2007 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:1993)
Association Francaise de Normalisation, Comparison of two measurement methods
- NF EN ISO 17994:2014 Qualité de l'eau - Exigences pour la comparaison du rendement relatif des microorganismes par deux méthodes quantitatives
- NF X20-105*NF ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
- NF X35-012:2010 3-D scanning methodologies for internationally compatible anthropometric databases.
- NF X43-508*NF EN ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- NF X20-105/A1*NF ISO 12963/A1:2021 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - AMENDMENT 1 : correction to Formula 5
- NF ISO 12963/A1:2021 Analyse des gaz - Méthodes de comparaison pour la détermination de la composition des mélanges de gaz basées sur un ou deux points d'étalonnage - Amendement 1 : correction de la Formule 5
- NF C97-338*NF EN 61094-8:2013 Measurement microphones - Part 8 : methods for determining the free-field sensitivity of working standard microphones by comparison
German Institute for Standardization, Comparison of two measurement methods
- DIN EN ISO 17994:2014-06 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO 17994:2014); German version EN ISO 17994:2014
- DIN 38402-71:2020-10 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Equivalence of two analysis methods based on the comparison of analysis results (A 71)
- DIN EN ISO 787-1:2018-01 General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982); German version EN ISO 787-1:2017
- DIN EN ISO 787-22:2018-01 General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments (ISO 787-22:1980); German version EN ISO 787-22:2017
- DIN 51899:2010-09 Gas analysis - Measurement programs and data evaluation procedures for gas chromatography and other comparison methods; only on CD-ROM / Note: To be amended by DIN 51899/A1 (2022-01).
- DIN 28418-2:1978 Vakuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vaccum gauge, ionization vacuum gauge
- DIN EN ISO 787-1:2018 General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982)
- DIN EN 61094-5:2016-12 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2016); German version EN 61094-5:2016
- DIN ISO 17714:2008-06 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics (ISO 17714:2007)
- DIN EN ISO 787-25:2019-06 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:2019); German version EN ISO 787-25:2019
- DIN EN ISO 20685:2006 3-D scanning methodologies for internationally compatible anthropometric databases (ISO 20685:2005); German version EN ISO 20685:2005
- DIN EN ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases (ISO 20685:2010); German version EN ISO 20685:2010
- DIN EN 61094-8:2013-04 Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison (IEC 61094-8:2012); German version EN 61094-8:2012 + AC:2013
- DIN 38402-71:2002 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Equivalance of two analytical methods based on the comparison of results and their statistical evaluation, Procedure for quantitative c
- DIN EN ISO 787-25:2019 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:2019)
Korean Agency for Technology and Standards (KATS), Comparison of two measurement methods
- KS I ISO 17994:2021 Water quality — Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
- KS C IEC 61094-5-2007(2012) Measurement microphones－Part 5：Methods for pressure calibration of working standard microphones by comparison
- KS C IEC 61094-5A:2017 Electroacoustics — Measurement microphones — Part 5: Methods for pressure calibration of working standard microphones by comparison
- KS I ISO 17714:2020 Meteorology — Air temperature measurements —Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
KR-KS, Comparison of two measurement methods
- KS I ISO 17994-2021 Water quality — Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
- KS I ISO 17714-2020 Meteorology — Air temperature measurements —Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Comparison of two measurement methods
- ASHRAE AB-10-012-2010 A Comparative Analysis and Validation of Two DX Cooling Coil Modeling Methods
- ASHRAE 3847-1995 Comparison of Energy Prediction of Three Ground-Coupling Heat Transfer Calculation Methods
- ASHRAE AC-02-14-2-2002 Comparison of Three Fault Detection Methods Based on Field Data of an Air-Handling Unit
- ASHRAE 3928-1995 Measurement of Two-Phase Refrigerant Liquid-Vapor Mass Flow Rate - Part III: Combined Turbine and Venturi Meters and Comparison with Other Methods
- ASHRAE 105-2014 Standard Methods of Measuring@ Expressing and Comparing Building Energy Performance and Greenhouse Gas Emissions
CU-NC, Comparison of two measurement methods
- NC 92-17-1987 Quality Control. Comparison of Two Means in the Case of Paired Observations
IT-UNI, Comparison of two measurement methods
European Committee for Standardization (CEN), Comparison of two measurement methods
- EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
- EN ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty ISO 14956: 2002
- EN 61094-5:2001 Measurement
microphones
Part 5: Methods for pressure calibration
of working standard microphones by
comparison
Standard Association of Australia （SAA）, Comparison of two measurement methods
- AS/NZS 1301.452rp:2006 Methods of test for pulp and paper - Determination of weight factors by the comparison method
- AS 1141.30.1:2009
- AS 1141.30:1996 Methods for sampling and testing of aggregates - Coarse aggregate quality by visual comparison
- AS 1141.30.1:2022 Methods for sampling and testing aggregates, Method 30.1: Coarse aggregate quality by visual comparison
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Comparison of two measurement methods
- ASHRAE 105-2007 Standard Methods of Measuring, Expressing and Comparing Building Energy Performance Includes Access to Additional Content
- ASHRAE 105 ADD A AND B-2012 Standard Methods of Measuring, Expressing and Comparing Building Energy Performance
American National Standards Institute （ANSI), Comparison of two measurement methods
- ANSI/ASHRAE 105-2007 Standard Methods of Measuring, Expressing and Comparing Building Energy Performance
International Organization for Standardization (ISO), Comparison of two measurement methods
- ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
- ISO 20685:2005 3-D scanning methodologies for internationally compatible anthropometric databases
- ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases
- ISO 12963:2017/Amd 1:2020 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - Amendment 1: Correction to Formula 5
British Standards Institution (BSI), Comparison of two measurement methods
- BS EN ISO 17994:2014 Water quality. Requirements for the comparison of the relative recovery of microorganisms by two quantitative method
- BS EN ISO 787-1:2017 General methods of test for pigments and extenders. Comparison of colour of pigments
- BS EN ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases
- BS EN ISO 787-22:2017 General methods of test for pigments and extenders. Comparison of resistance to bleeding of pigments
- 20/30419851 DC BS ISO 12963 AMD1. Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
- BS EN 61094-5:2002 Measurement microphones - Methods for pressure calibration of working standard microphones by comparison
- BS EN 61094-5:2016 Tracked Changes. Electroacoustics. Measurement microphones. Methods for pressure calibration of working standard microphones by comparison
- BS 1741 Sec.5.1:1988 Methods for chemical analysis of liquid milk and cream. Determination of the nitrogen content of liquid milk. Reference method
- BS EN ISO 787-21:2017 General methods of test for pigments and extenders. Comparison of heat stability of pigments using a stoving medium
- BS EN ISO 787-17:2019 Tracked Changes. General methods of test for pigments and extenders. Comparison of lightening power of white pigments
- BS 1741 Sec.7.1:1989 Methods for chemical analysis of liquid milk and cream. Determination of lactose content. Reference method
- BS EN ISO 787-25:2019 Tracked Changes. General methods of test for pigments and extenders. Comparison of the colour, in full-shade systems, of white, black and coloured pigments. Colorimetric method
- BS 1741 Sec.6.1:1990 Methods for chemical analysis of liquid milk and cream. Determination of casein nitrogen content of liquid milk. Reference method
- BS EN 689:1996 Workplace atmospheres - Guidance for the assessment of exposure by inhalation to chemical agents for comparison with limit values and measurement strategy
Association of German Mechanical Engineers, Comparison of two measurement methods
- VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
Acoustical Society of America (ASA), Comparison of two measurement methods
- ASA S12.57-2002 Acoustics ?Determination of Sound Power Levels of Noise Sources using Sound Pressure Comparison Method in Situ
RU-GOST R, Comparison of two measurement methods
- GOST 23089.14-1988 Integrated microcircuits. Methods for measuring delay time of the switching on/off the voltage comparators
- GOST R ISO 20685-2013 Ergonomics. 3-D scanning methodologies for internationally compatible anthropometric databases
- GOST 23089.1-1983 Integrated circuits. Method of measuring the operational amplifiers and voltage comparators gain
- GOST 23089.3-1983 Integrated circuits. Methods of measuring the operational amplifiers and voltage comparators zero offset voltage and emf
- GOST 23089.11-1983 Integrated circuits. Methods of measuring the operational amplifiers and voltage comparators input common mode voltage rejection ratio
American Society for Testing and Materials (ASTM), Comparison of two measurement methods
- ASTM D7298-06(2017) Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
- ASTM D3801-19 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-19a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-00 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-20 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D5048-20 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-03 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-18 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-97 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-09 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-19 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-14 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
Japanese Industrial Standards Committee (JISC), Comparison of two measurement methods
- JIS A 1129-1:2010 Methods of measurement for length change of mortar and concrete -- Part 1: Method with comparator
ES-UNE, Comparison of two measurement methods
- UNE-EN ISO 787-1:2018 General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982)
- UNE-EN ISO 787-22:2018 General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments (ISO 787-22:1980)
- UNE-EN ISO 787-17:2020 General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments (ISO 787-17:2019)
- UNE-EN ISO 787-15:2020 General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types (ISO 787-15:2019)
European Committee for Electrotechnical Standardization（CENELEC）, Comparison of two measurement methods
- EN 61094-5:2016 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
ZA-SANS, Comparison of two measurement methods
- SANS 61094-5:2009 Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparison
IN-BIS, Comparison of two measurement methods
Lithuanian Standards Office , Comparison of two measurement methods
- LST EN 61094-5-2002 Measurement microphones. Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001)
- LST EN ISO 787-25:2007 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:1993)
Institute of Electrical and Electronics Engineers (IEEE), Comparison of two measurement methods
Danish Standards Foundation, Comparison of two measurement methods
- DS/ISO 17714:2007 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- DS/EN 61094-5:2002 Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
International Telecommunication Union (ITU), Comparison of two measurement methods
- ITU-T P.1401-2012 Methods, metrics and procedures for statistical evaluation, qualification and comparison of objective quality prediction models (Study Group 12)