ZH
RU
ES
Comparison of Three Measurement Methods
Comparison of Three Measurement Methods, Total:107 items.
In the international standard classification, Comparison of Three Measurement Methods involves: Ergonomics, Air quality, Photography, Paper and board, Thermodynamics and temperature measurements, Construction materials, Microbiology, Acoustics and acoustic measurements, Integrated circuits. Microelectronics, Occupational safety. Industrial hygiene, Protection against fire, Fertilizers, Optics and optical measurements, Audio, video and audiovisual engineering, Quality, Measurement of force, weight and pressure, Vacuum technology, Paint ingredients, Plastics, Geology. Meteorology. Hydrology.
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Comparison of Three Measurement Methods
- ASHRAE 3847-1995 Comparison of Energy Prediction of Three Ground-Coupling Heat Transfer Calculation Methods
- ASHRAE AC-02-14-2-2002 Comparison of Three Fault Detection Methods Based on Field Data of an Air-Handling Unit
- ASHRAE 3928-1995 Measurement of Two-Phase Refrigerant Liquid-Vapor Mass Flow Rate - Part III: Combined Turbine and Venturi Meters and Comparison with Other Methods
- ASHRAE 105-2014 Standard Methods of Measuring@ Expressing and Comparing Building Energy Performance and Greenhouse Gas Emissions
International Organization for Standardization (ISO), Comparison of Three Measurement Methods
- ISO 20685:2005 3-D scanning methodologies for internationally compatible anthropometric databases
- ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases
- ISO 20462-2:2005/cor 1:2007 Photography - Psychophysical experimental methods for estimating image quality - Part 2: Triplet comparison method; Technical Corrigendum 1
- ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
Association Francaise de Normalisation, Comparison of Three Measurement Methods
- NF X35-012:2010 3-D scanning methodologies for internationally compatible anthropometric databases.
- NF EN ISO 17994:2014 Qualité de l'eau - Exigences pour la comparaison du rendement relatif des microorganismes par deux méthodes quantitatives
- NF X43-508*NF EN ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty
- NF U42-502*NF EN 15749:2010 Fertilizers - Determination of sulfates content using three different methods.
- NF C97-338*NF EN 61094-8:2013 Measurement microphones - Part 8 : methods for determining the free-field sensitivity of working standard microphones by comparison
British Standards Institution (BSI), Comparison of Three Measurement Methods
- BS EN ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases
- BS ISO 20462-2:2005 Photography. Psychophysical experimental methods for estimating image quality - Triplet comparison method
- 20/30425659 DC BS EN 13523-3. Coil coated metals. Test methods. Part 3. Colour difference. Instrumental comparison
- BS EN ISO 787-1:2017 General methods of test for pigments and extenders. Comparison of colour of pigments
- BS EN ISO 787-22:2017 General methods of test for pigments and extenders. Comparison of resistance to bleeding of pigments
- BS EN 61094-5:2002 Measurement microphones - Methods for pressure calibration of working standard microphones by comparison
- PD ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
- BS EN 61094-5:2016 Tracked Changes. Electroacoustics. Measurement microphones. Methods for pressure calibration of working standard microphones by comparison
- BS EN 15749:2009 Fertilizers - Determination of sulfates content using three different methods
- BS 1741 Sec.5.1:1988 Methods for chemical analysis of liquid milk and cream. Determination of the nitrogen content of liquid milk. Reference method
- BS EN ISO 787-21:2017 General methods of test for pigments and extenders. Comparison of heat stability of pigments using a stoving medium
- BS EN ISO 787-17:2019 Tracked Changes. General methods of test for pigments and extenders. Comparison of lightening power of white pigments
- 14/30313916 DC BS ISO 25749. Fertilizers. Determination of sulfates content using three different methods
- 21/30400088 DC BS EN 15749. Fertilizers. Determination of sulfates content using three different methods
- BS 1741 Sec.7.1:1989 Methods for chemical analysis of liquid milk and cream. Determination of lactose content. Reference method
- BS EN ISO 787-25:2019 Tracked Changes. General methods of test for pigments and extenders. Comparison of the colour, in full-shade systems, of white, black and coloured pigments. Colorimetric method
- BS EN 15749:2022 Tracked Changes. Fertilizers. Determination of sulfates content using three different methods
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Comparison of Three Measurement Methods
- GB/T 14675-1993 Air quality. Determination of odor. Triangle odor bag method
RU-GOST R, Comparison of Three Measurement Methods
- GOST R ISO 20685-2013 Ergonomics. 3-D scanning methodologies for internationally compatible anthropometric databases
- GOST 23089.14-1988 Integrated microcircuits. Methods for measuring delay time of the switching on/off the voltage comparators
- GOST 23089.1-1983 Integrated circuits. Method of measuring the operational amplifiers and voltage comparators gain
- GOST EN 15749-2013 Fertilizers. Determination of sulfates content using three different methods
German Institute for Standardization, Comparison of Three Measurement Methods
- DIN EN ISO 17994:2014-06 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO 17994:2014); German version EN ISO 17994:2014
- DIN EN ISO 20685:2006 3-D scanning methodologies for internationally compatible anthropometric databases (ISO 20685:2005); German version EN ISO 20685:2005
- DIN EN ISO 20685:2010 3-D scanning methodologies for internationally compatible anthropometric databases (ISO 20685:2010); German version EN ISO 20685:2010
- DIN EN ISO 787-1:2018-01 General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982); German version EN ISO 787-1:2017
- DIN EN 15749:2022 Fertilizers - Determination of sulfates content using three different methods
- DIN EN 15749:2022-10 Fertilizers - Determination of sulfates content using three different methods; German version EN 15749:2022
- DIN EN ISO 787-22:2018-01 General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments (ISO 787-22:1980); German version EN ISO 787-22:2017
- DIN 51899:2010-09 Gas analysis - Measurement programs and data evaluation procedures for gas chromatography and other comparison methods; only on CD-ROM / Note: To be amended by DIN 51899/A1 (2022-01).
- DIN 28418-2:1978 Vakuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vaccum gauge, ionization vacuum gauge
- DIN EN ISO 787-1:2018 General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982)
- DIN EN 61094-5:2016-12 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2016); German version EN 61094-5:2016
- DIN ISO 17714:2008-06 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics (ISO 17714:2007)
- DIN EN ISO 787-25:2019-06 General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:2019); German version EN ISO 787-25:2019
Korean Agency for Technology and Standards (KATS), Comparison of Three Measurement Methods
- KS I ISO 17994:2021 Water quality — Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
- KS A ISO 20462-2-2007(2017) Photography－Psychophysical experimental methods for estimating image quality－Part 2：Triplet comparison method
- KS A ISO 20462-2-2007(2022) Photography－Psychophysical experimental methods for estimating image quality－Part 2：Triplet comparison method
- KS C IEC 61094-5-2007(2012) Measurement microphones－Part 5：Methods for pressure calibration of working standard microphones by comparison
- KS Q ISO TR 13587:2021 Three statistical approaches for the assessment and interpretation of measurement uncertainty
- KS C IEC 61094-5A:2017 Electroacoustics — Measurement microphones — Part 5: Methods for pressure calibration of working standard microphones by comparison
KR-KS, Comparison of Three Measurement Methods
- KS I ISO 17994-2021 Water quality — Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
- KS Q ISO TR 13587-2021 Three statistical approaches for the assessment and interpretation of measurement uncertainty
Standard Association of Australia （SAA）, Comparison of Three Measurement Methods
- AS/NZS 1301.452rp:2006 Methods of test for pulp and paper - Determination of weight factors by the comparison method
- AS 1141.30.1:2009
- AS 1141.30:1996 Methods for sampling and testing of aggregates - Coarse aggregate quality by visual comparison
- AS 1141.30.1:2022 Methods for sampling and testing aggregates, Method 30.1: Coarse aggregate quality by visual comparison
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Comparison of Three Measurement Methods
- ASHRAE 105-2007 Standard Methods of Measuring, Expressing and Comparing Building Energy Performance Includes Access to Additional Content
- ASHRAE 105 ADD A AND B-2012 Standard Methods of Measuring, Expressing and Comparing Building Energy Performance
American National Standards Institute （ANSI), Comparison of Three Measurement Methods
- ANSI/ASHRAE 105-2007 Standard Methods of Measuring, Expressing and Comparing Building Energy Performance
AENOR, Comparison of Three Measurement Methods
- UNE-EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO 17994:2014)
- UNE-EN 15749:2010 Fertilizers - Determination of sulfates content using three different methods
Association of German Mechanical Engineers, Comparison of Three Measurement Methods
- VDI 2463 Blatt 8-1982 Particulate matter measurement; measurement of mass concentration in ambient air; standard method for the comparsion of nonfractionating methods
MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Comparison of Three Measurement Methods
- SP 112 COMPARATOR-2016 Quality Standard For Evaluation Of Cast Surface Finishes – Visual and Tactile Method – Three Dimensional Cast Surface Comparator
未注明发布机构, Comparison of Three Measurement Methods
- BS ISO 20462-2:2005(2007) Photography — Psychophysical experimental methods for estimating image quality — Part 2 : Triplet comparison method
European Committee for Standardization (CEN), Comparison of Three Measurement Methods
- EN ISO 17994:2014 Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
- EN ISO 14956:2002 Air quality - Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty ISO 14956: 2002
- PD CEN/TS 15749:2008 Fertilizers - Determination of sulfates content using three different methods
- prEN 15749-2021 Fertilizers - Determination of sulfates content using three different methods
- EN 61094-5:2001 Measurement
microphones
Part 5: Methods for pressure calibration
of working standard microphones by
comparison
- EN 15749:2009 Fertilizers - Determination of sulfates content using three different methods
Acoustical Society of America (ASA), Comparison of Three Measurement Methods
- ASA S12.57-2002 Acoustics ?Determination of Sound Power Levels of Noise Sources using Sound Pressure Comparison Method in Situ
American Society for Testing and Materials (ASTM), Comparison of Three Measurement Methods
- ASTM D7298-06(2017) Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
- ASTM D3801-19 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-19a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-00 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-20 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- ASTM E1347-06(2020) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
- ASTM E1347-97 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
- ASTM D5048-20 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-03 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-18 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-97 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-09 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-19 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- ASTM D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
- ASTM D5048-14 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
Japanese Industrial Standards Committee (JISC), Comparison of Three Measurement Methods
- JIS A 1129-1:2010 Methods of measurement for length change of mortar and concrete -- Part 1: Method with comparator
ES-UNE, Comparison of Three Measurement Methods
- UNE-EN ISO 787-1:2018 General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982)
- UNE-EN 15749:2023 Fertilizers - Determination of sulfates content using three different methods
- UNE-EN ISO 787-22:2018 General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments (ISO 787-22:1980)
- UNE-EN ISO 787-17:2020 General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments (ISO 787-17:2019)
Danish Standards Foundation, Comparison of Three Measurement Methods
- DS/EN 15749:2009 Fertilizers - Determination of sulfates content using three different methods
- DS/ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
- DS/ISO 17714:2007 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
Lithuanian Standards Office , Comparison of Three Measurement Methods
- LST EN 15749-2010 Fertilizers - Determination of sulfates content using three different methods
- LST EN 61094-5-2002 Measurement microphones. Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001)
PH-BPS, Comparison of Three Measurement Methods
- PNS ASTM E1347:2021 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
European Committee for Electrotechnical Standardization（CENELEC）, Comparison of Three Measurement Methods
- EN 61094-5:2016 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
ZA-SANS, Comparison of Three Measurement Methods
- SANS 61094-5:2009 Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparison
IN-BIS, Comparison of Three Measurement Methods
Institute of Electrical and Electronics Engineers (IEEE), Comparison of Three Measurement Methods