ZH
RU
ES

Microscopy for front-end analysis

Microscopy for front-end analysis, Total:94 items.

In the international standard classification, Microscopy for front-end analysis involves: Analytical chemistry, Optical equipment, Medical equipment, Vocabularies, Coals, Fuels, Air quality, Raw materials for rubber and plastics, Construction materials, Physics. Chemistry, Lubricants, industrial oils and related products, Medical sciences and health care facilities in general, Microbiology, Linear and angular measurements, Textile fibres, Semiconducting materials, Testing of metals.

International Organization for Standardization (ISO), Microscopy for front-end analysis

ISO/CD 25498:2023 Microbeam analysis — Analytical electron microscopy — Selected area electron diffraction analysis using a transmission electron microscope
ISO/TS 21383:2021 Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
ISO 19214:2017 Microbeam analysis - Analytical electron microscopy - Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy
ISO/FDIS 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
ISO 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
ISO 18115-2:2010 Analyse chimique des surfaces — Vocabulaire — Partie 2: Termes utilisés en microscopie à sonde à balayage (Première édition)
ISO 21466:2019 Microbeam analysis — Scanning electron microscopy — Method for evaluating critical dimensions by CD-SEM
ISO/WD TR 23683:2023 Surface chemical analysis — scanning probe microscopy — Guideline for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy
ISO 19056-1:2015 Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy
ISO 7404-5:2009 Methods for the petrographic analysis of coals - Part 5: Method of determining microscopically the reflectance of vitrinite
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
ISO 11952:2014 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 24639:2022 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
ISO 22262-2:2014 Air quality - Bulk materials - Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
ISO 18115-2:2013 Surface chemical analysis.Vocabulary.Part 2: Terms used in scanning-probe microscopy
ISO 11952:2019 Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 20706-1:2019 Textiles — Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends — Part 1: Fibre identification using microscopy methods
ISO 13095:2014 Surface Chemical Analysis - Atomic force microscopy - Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement

British Standards Institution (BSI), Microscopy for front-end analysis

BS ISO 25498:2018 Tracked Changes. Microbeam analysis. Analytical electron microscopy. Selected area electron diffraction analysis using a transmission electron microscope
BS ISO 18115-2:2021 Surface chemical analysis. Vocabulary - Terms used in scanning-probe microscopy
18/30319114 DC BS ISO 20171. Microbeam analysis. Scanning electron microscopy. Tagged image file format for Scanning electron microscopy(TIFF/SEM)
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS ISO 7404-5:2009 Methods for the petrographic analysis of coals - Method of determining microscopically the reflectance of vitrinite
21/30395346 DC BS ISO 19056-3. Microscopes. Definition and measurement of illumination properties. Part 3. Incident light fluorescence microscopy with incoherent light sources
BS ISO 11952:2019 Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
12/30265696 DC BS ISO 18115-2 AMD1. Surface chemical analysis. Vocabulary. Part 2. Terms used in scanning-probe microscopy
BS ISO 11938:2013 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BS ISO 22262-2:2014 Air quality. Bulk materials. Quantitative determination of asbestos by gravimetric and microscopical methods
BS ISO 18115-2:2010 Surface chemical analysis - Vocabulary - Terms used in scanning-probe microscopy
BS ISO 29301:2017 Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures
BS ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS EN ISO 20706-1:2019 Textiles. Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends - Fibre identification using microscopy methods
19/30394914 DC BS ISO 15632. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energydispersive X-ray spectrometers for use in electron probe microscope or an electron probe microanalyser (EPMA)
BS ISO 13095:2014 Surface Chemical Analysis. Atomic force microscopy. Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
BS DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
18/30372709 DC BS ENISO 20706-1. Textiles. Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends. Part 1. Fibre identification using microscopy methods
BS ISO 21915-1:2020 Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends - Fibre identification using scanning electron microscopy and spectral analysis methods

Korean Agency for Technology and Standards (KATS), Microscopy for front-end analysis

KS B 5617-2018 Stage micrometer for biological microscope
KS P ISO 10936-2:2020 Optics and photonics — Operation microscopes — Part 2: Light hazard from operation microscopes used in ocular surgery
KS D ISO 5949-2002(2012) Tool steels and bearing steels－Micrographic method for assessing the distribution of carbides using reference photomicrographs

Japanese Industrial Standards Committee (JISC), Microscopy for front-end analysis

JIS T 10936-2:2014 Operation microscopes.Part 2: Light hazard from operation microscopes used in ocular surgery
JIS L 1030-4-1:2023 Textiles -- Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends -- Part 4-1: Fibre identification using scanning electron microscopy and spectral analysis methods

KR-KS, Microscopy for front-end analysis

KS P ISO 10936-2-2020 Optics and photonics — Operation microscopes — Part 2: Light hazard from operation microscopes used in ocular surgery

Danish Standards Foundation, Microscopy for front-end analysis

DS/ISO 10936-2:2010 Optics and photonics - Operation microscopes - Part 2: Light hazard from operation microscopes used in ocular surgery
DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis

Association Francaise de Normalisation, Microscopy for front-end analysis

NF T90-379*NF EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Uterm？hl technique)
NF X43-066-2*NF ISO 22262-2:2014 Air quality - Bulk materials - Part 2 : quantitative determination of asbestos by gravimetric and microscopical methods
FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
NF G06-009-1*NF EN ISO 20706-1:2019 Textiles - Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends - Part 1 : fibre identification using microscopy methods
NF T70-360:2007 Energetic materials for defence - Physico-chemical analyses and properties - Measurement of the penetration depth of plasticizers and/or deterrents - Method by microscopy

American Society for Testing and Materials (ASTM), Microscopy for front-end analysis

ASTM D3997/D3997M-97(2009) Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM D3997/D3997M-16 Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM D2797-85(1999) Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D3849-02 Standard Test Method for Carbon Black-Morphological Characterization of Carbon Black Using Electron Microscopy
ASTM D3849-04 Standard Test Method for Carbon Black-Morphological Characterization of Carbon Black Using Electron Microscopy
ASTM D5671-95(2011) Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
ASTM D5671-95(2005) Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
ASTM D4616-95(2000) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D4616-95 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D4616-95(2018) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D7416-08 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Coun
ASTM E1588-95(2001) Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM E1588-08 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-10 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-95 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM F3294-18 Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
ASTM D5756-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
ASTM D5756-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
ASTM D5755-03 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
ASTM D5755-09 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
ASTM D5755-09(2014)e1 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
ASTM F1372-93(2005) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2012) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D5755-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
ASTM D5755-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
ASTM D5756-02(2008) Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading
ASTM D8526-23 Standard Test Method for Analytical Procedure Using Transmission Electron Microscopy for the Determination of the Concentration of Carbon Nanotubes and Carbon Nanotube-containing Particles in Ambient
ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E3275-21 Standard Guide for Visualization and Identification of Nanomaterials in Biological and Nonbiological Matrices Using Darkfield Microscopy/Hyperspectral Imaging (DFM/HSI) Analysis
ASTM F1438-93(2012) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components

AENOR, Microscopy for front-end analysis

UNE 32301:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MICROSCOPICALLY THE REFLECTANCE OF VITRINITE.

HU-MSZT, Microscopy for front-end analysis

MSZ 14340/3-1979

German Institute for Standardization, Microscopy for front-end analysis

DIN 58959-4:1997-06 Quality management in medical microbiology - Part 4: Requirements for investigations using light microscopes / Note: To be replaced by DIN 58959-6 Beiblatt 2 (2021-08, t).
DIN 50452-1:1995 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles
DIN EN ISO 20706-1:2020-06 Textiles - Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends - Part 1: Fibre identification using microscopy methods (ISO 20706-1:2019, Corrected version 2020-03); German version EN ISO 20706-1:2019

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Microscopy for front-end analysis

GB/T 17507-2008 General specification of thin biological standards for X-ray EDS microanalysis in transmission electron microscope

European Committee for Standardization (CEN), Microscopy for front-end analysis

EN ISO 20706-1:2019 Textiles - Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends - Part 1: Fibre identification using microscopy methods (ISO 20706-1:2019, Corrected version 2020-03)

ES-UNE, Microscopy for front-end analysis

UNE-EN ISO 20706-1:2021 Textiles - Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends - Part 1: Fibre identification using microscopy methods (ISO 20706-1:2019, Corrected version 2020-03)

未注明发布机构, Microscopy for front-end analysis

BS EN ISO 20706-1:2019(2020) Textiles — Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends Part 1 : Fibre identification using microscopy methods

PL-PKN, Microscopy for front-end analysis

PN Z04097 Arkusz 01-1974 Air purity protection Tests for the size composition of dust Measurement of quantitative distribution of projective dust particie size ^2 (im with micros- cope without using of immersion li?uid