ZH
RU
ES

Analysis of the use of light microscope

Analysis of the use of light microscope, Total:327 items.

In the international standard classification, Analysis of the use of light microscope involves: Optical equipment, Medical equipment, Vocabularies, Analytical chemistry, Particle size analysis. Sieving, Fuels, Coals, Electrical wires and cables, Air quality, Non-ferrous metals, Optoelectronics. Laser equipment, Fluid power systems, Testing of metals, Microbiology, Construction materials, Textile fibres, Physics. Chemistry, Medical sciences and health care facilities in general, Raw materials for rubber and plastics, Lubricants, industrial oils and related products, Glass, Optics and optical measurements, Paints and varnishes, Products of the textile industry, Ergonomics, IT terminal and other peripheral equipment, Paper and board, Protective equipment, Electronic display devices, Surface treatment and coating, Linear and angular measurements, Semiconducting materials.

Association Francaise de Normalisation, Analysis of the use of light microscope

X11-660:1983 Particle size analysis by optical microscope method. General indications on microscope.
NF X11-660:1983 Granulométrie - Analyse granulométrique par microscopie optique - Généralités sur le microscope.
NF S10-500*NF ISO 21073:2020 Microscopes - Confocal microscopes - Optical data of fluorescence confocal microscopes for biological imaging
NF ISO 21073:2020 Microscopes - Microscopes confocaux - Données optiques des microscopes confocaux à fluorescence pour l'imagerie biologique
NF X11-661:1990 Particle size analysis. Determination of particle size of powders. Optical microscope method.
NF X21-069-2:2010 Surface chemical analysis - Vocabulary - Part 2 : terms used in scanning-probe microscopy.
NF EN ISO 17751-1:2016 Textiles - Analyse quantitative du cachemire, de la laine, d'autres fibres animales spéciales et leurs mélanges - Partie 1 : méthode de microscopie optique
NF S10-132-4*NF EN ISO 14880-4:2006 Optics and phonotics - Microlens arrays - Part 4 : test methods for geometrical properties.
NF E48-660:1991 Hydraulic fluid systems. Fluids. Determination of solid particulate contamination by optical microscope and image analysis.
NF S10-132-2*NF EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Part 2 : test methods for wavefront aberrations
NF T90-379*NF EN 15204:2006 Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Uterm？hl technique)
NF G07-142-1*NF EN ISO 17751-1:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 1 : light microscopy method
FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
NF X35-122-333*NF EN ISO 9241-333:2017 Ergonomics of human-system interaction - Part 333 : stereoscopic displays using glasses
NF X21-007:2008 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steel using a calibration curve method.
NF X43-066-2*NF ISO 22262-2:2014 Air quality - Bulk materials - Part 2 : quantitative determination of asbestos by gravimetric and microscopical methods
NF EN ISO 9241-333:2017 Ergonomie de l'interaction homme-système - Partie 333 : écrans stéréoscopiques utilisant des lunettes
NF ISO 11938:2012 Analyse par microfaisceaux - Analyse par microsonde électronique (microsonde de Castaing) - Méthodes d'analyse par cartographie élémentaire en utilisant la spectrométrie à dispersion de longueur d'onde
NF T70-360:2007 Energetic materials for defence - Physico-chemical analyses and properties - Measurement of the penetration depth of plasticizers and/or deterrents - Method by microscopy

British Standards Institution (BSI), Analysis of the use of light microscope

BS 7012-8:1997 Light microscopes - Graticules for eyepieces
BS ISO 21073:2019 Microscopes. Confocal microscopes. Optical data of fluorescence confocal microscopes for biological imaging
BS 7012-10.1:1998 Light microscopes - Minimum requirements for stereo microscopes - Stereo microscopes for general use
BS ISO 11884-1:2006 Optics and photonics - Minimum requirements for stereomicroscopes - Stereomicroscopes for general use
18/30339977 DC BS ISO 21073. Microscopes. Confocal microscopes. Optical data of fluorescence confocal microscopes for biological imaging
BS ISO 27911:2011 Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
BS ISO 10936-2:2010 Optics and photonics - Operation microscopes - Light hazard from operation microscopes used in ocular surgery
BS ISO 25498:2018 Tracked Changes. Microbeam analysis. Analytical electron microscopy. Selected area electron diffraction analysis using a transmission electron microscope
BS ISO 18115-2:2021 Surface chemical analysis. Vocabulary - Terms used in scanning-probe microscopy
BS 7012-10.4:1998 Light microscopes - Minimum requirements for stereo microscopes - Information provided to the user
BS ISO 19056-3:2022 Microscopes. Definition and measurement of illumination properties - Incident light fluorescence microscopy with incoherent light sources
BS 7012-11:1998 Light microscopes - Information provided to the user
21/30395346 DC BS ISO 19056-3. Microscopes. Definition and measurement of illumination properties. Part 3. Incident light fluorescence microscopy with incoherent light sources
BS ISO 21222:2020 Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS ISO 18115-2:2013 Surface chemical analysis. Vocabulary. Terms used in scanning-probe microscopy
BS 7011 Sec.2.1:1989 Consumable accessories for light microscopes. Slides. Specification for dimensions and optical properties
BS ISO 18337:2015 Surface chemical analysis. Surface characterization. Measurement of the lateral resolution of a confocal fluorescence microscope
19/30351707 DC BS ISO 21222. Surface chemical analysis. Scanning probe microscopy. Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
BS ISO 11952:2019 Surface chemical analysis. Scanning-probe microscopy. Determination of geometric quantities using SPM: Calibration of measuring systems
BS ISO 11039:2012 Surface chemical analysis. Scanning-probe microscopy. Measurement of drift rate
BS ISO 19056-1:2015 Microscopes. Definition and measurement of illumination properties. Image brightness and uniformity in bright field microscopy
12/30265696 DC BS ISO 18115-2 AMD1. Surface chemical analysis. Vocabulary. Part 2. Terms used in scanning-probe microscopy
BS ISO 28600:2011 Surface chemical analysis. Data transfer format for scanning-probe microscopy
BS ISO 11938:2013 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BS 7011-0:1989 Consumable accessories for light microscopes. General introduction
BS ISO 23729:2022 Surface chemical analysis. Atomic force microscopy. Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
18/30319114 DC BS ISO 20171. Microbeam analysis. Scanning electron microscopy. Tagged image file format for Scanning electron microscopy(TIFF/SEM)
BS ISO 18115-2:2010 Surface chemical analysis - Vocabulary - Terms used in scanning-probe microscopy
21/30412880 DC BS ISO 23729. Surface chemical analysis. Atomic force microscopy. Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
BS ISO 7404-5:2009 Methods for the petrographic analysis of coals - Method of determining microscopically the reflectance of vitrinite
23/30420097 DC BS ISO 23124 Surface Chemical Analysis. Measurement of lateral and axial resolutions of Raman microscope
BS ISO 11775:2015 Surface chemical analysis. Scanning-probe microscopy. Determination of cantilever normal spring constants
DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS 7011-2.1:1989 Consumable accessories for light microscopes - Slides - Specification for dimensions and optical properties
BS EN ISO 17751-1:2016 Textiles. Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends. Light Microscopy method
BS ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
BS 7012-13:1997 Light microscopes. Interfacing connection for 35 mm SLR photo cameras (T-thread adaptation)
BS 7011-3.1:1989 Consumable accessories for light microscopes - Cover glasses - Specification for dimensions and optical properties
BS 7011 Sec.3.1:1989 Consumable accessories for light microscopes. Cover glasses. Specification for dimensions and optical properties
BS ISO 13095:2014 Surface Chemical Analysis. Atomic force microscopy. Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
BS ISO 22262-2:2014 Air quality. Bulk materials. Quantitative determination of asbestos by gravimetric and microscopical methods
BS 7011 Sec.1.1:1989 Consumable accessories for light microscopes. Immersion oils. Specification for immersion oils for general use
BS ISO 16592:2012 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method
BS ISO 29301:2017 Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures
BS ISO 18115-3:2022 Surface chemical analysis. Vocabulary - Terms used in optical interface analysis
BS ISO 17470:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
BS ISO 21915-2:2020 Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends - Blend quantification using light microscopy method
19/30394914 DC BS ISO 15632. Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energydispersive X-ray spectrometers for use in electron probe microscope or an electron probe microanalyser (EPMA)
BS DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
22/30442788 DC BS EN ISO 17751-1. Textiles. Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1. Light microscopy method
BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
BS 7011 Pt.3 Sec.3.2:1990 Consumable accessories for light microscopes. Cover glasses. Specification for materials and quality of finish
BS ISO 21915-1:2020 Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends - Fibre identification using scanning electron microscopy and spectral analysis methods
BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
BS ISO 15632:2021 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
21/30385921 DC BS ISO 18115-3. Surface chemical analysis. Vocabulary. Part 3. Terms used in optical interface analysis
19/30366981 DC BS ISO 21915-2. Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends. Part 2. Blend quantification using light microscopy method
BS EN ISO 20706-1:2019 Textiles. Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends - Fibre identification using microscopy methods
BS ISO 14594:2003 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
BS ISO 14594:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy

Korean Agency for Technology and Standards (KATS), Analysis of the use of light microscope

KS P ISO 10936-2:2020 Optics and photonics — Operation microscopes — Part 2: Light hazard from operation microscopes used in ocular surgery
KS B ISO 8036-1:2006 Optics and optical instruments－Microscopes－Part 1：Immersion oil for general use in light microscopy
KS B ISO 8036-1:2008 Optics and optical instruments－Microscopes－Part 1：Immersion oil for general use in light microscopy
KS B ISO 10934-2:2011 Optics and optical instruments－Vocabulary for microscopy－Part 2：Advanced techniques in light microscopy
KS B ISO 11884-2:2011 Optics and photonics－Minimum requirements for stereomicroscope－Part 2：High performance microscopes
KS B ISO 12853:2006 Optics and optical instruments-Microscopes-Information provided to the user
KS B ISO 12853-2016(2021) Optics and optical instruments－Microscopes－Information provided to the user
KS B ISO 12853:2016 Optics and optical instruments－Microscopes－Information provided to the user
KS B ISO 15362:2006 Optics and optical instruments-Stereomicroscopes-Information provided to the user
KS B ISO 15362-2016(2021) Optics and optical instruments－Stereomicroscopes－Information provided to the user
KS B ISO 15362:2016 Optics and optical instruments－Stereomicroscopes－Information provided to the user
KS B ISO 19012-1-2016(2021) Optics and photonics－Designation of microscope objectives－Part 1：Flatness of field/Plan
KS D 2713-2006 Evaluation of spatial resolution of NSOM(Near-field Scanning Optical Microscope)
KS D 2713-2016 Evaluation of spatial resolution of NSOM(Near-field Scanning Optical Microscope)
KS D 2713-2016(2021) Evaluation of spatial resolution of NSOM(Near-field Scanning Optical Microscope)
KS B ISO 8038-2-2006(2016) Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces —Part 2: Screw thread type M25 × 0.75 mm
KS B ISO 8038-2-2006(2021) Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces —Part 2: Screw thread type M25 × 0.75 mm
KS B ISO 8038-2:2006 Optics and optical instruments－Screw threads for microscope objectives and related nosepieces－Part 2：Screw thread type M25×0.75 mm
KS B ISO 14880-2:2013 Optics and photonics ― Microlens arrays ― Part 2: Test methods for wavefront aberrations
KS B ISO 14880-2:2008 Optics and photonics-Microlens arrays-Part 2:Test methods for wavefront aberrations
KS B ISO 8038-1-2006(2021) Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces —Part 1: Screw thread type RMS(4/5 in×1/36 in)
KS B ISO 8038-1-2006(2016) Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces —Part 1: Screw thread type RMS(4/5 in×1/36 in)
KS C IEC 62629-12-1:2022 3D Display Devices — Part 12-1: Measuring methods for stereoscopic displays using glasses — Optical
KS B ISO 9345-1:2006 Optics and optical instruments Microscopes - Imaging distances related to mechanical reference planes - Part 1 Tube length 160 mm
KS B ISO 9345-1:2016 Optics and optical instruments Microscopes - Imaging distances related to mechanical reference planes - Part 1 Tube length 160 mm
KS B ISO 9345-1-2023 Image distance of optical and optical instrument microscopes relative to mechanical reference planes Part 1: 160 mm tube length
KS B ISO 9345-2:2006 Optics and optical instruments-Microscopes:Imaging distances related to mechanical reference planes-Part 2:Infinity-corrected optical systems
KS B ISO 9345-2:2016 Optics and optical instruments－Microscopes：Imaging distances related to mechanical reference planes－Part 2：Infinity-corrected optical systems
KS K ISO 17751-1:2019 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 1: Light microscopy method Textiles — Quantitative analysis of cashmere, wool, other specialty
KS B ISO 9345-2-2016(2021) Optics and optical instruments－Microscopes：Imaging distances related to mechanical reference planes－Part 2：Infinity-corrected optical systems
KS B ISO 9345-1-2016(2021) Optics and optical instruments Microscopes - Imaging distances related to mechanical reference planes - Part 1 Tube length 160 mm
KS D ISO 16592:2011 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS I ISO 8672:2021 Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy —Membrane filter method
KS I ISO 8672-2006(2017) Air quality－Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy(Membrane filter method)
KS D ISO 22489:2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS D ISO 14594:2012 Microbeam analysis－Electron probe microanalysis－Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy

KR-KS, Analysis of the use of light microscope

KS P ISO 10936-2-2020 Optics and photonics — Operation microscopes — Part 2: Light hazard from operation microscopes used in ocular surgery
KS B ISO 8036-1-2006 Optics and optical instruments－Microscopes－Part 1：Immersion oil for general use in light microscopy
KS B ISO 12853-2016 Optics and optical instruments－Microscopes－Information provided to the user
KS B ISO 19012-1-2016 Optics and photonics－Designation of microscope objectives－Part 1：Flatness of field/Plan
KS B ISO 15362-2016 Optics and optical instruments－Stereomicroscopes－Information provided to the user
KS B ISO 8038-2-2023 Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces — Part 2: Screw thread type M25 × 0.75 mm
KS C IEC 62629-12-1-2022 3D Display Devices — Part 12-1: Measuring methods for stereoscopic displays using glasses — Optical
KS B ISO 8038-1-2023 Optics and optical instruments — Microscopes — Screw threads for objectives and related nosepieces — Part 1: Screw thread type RMS(4/5 in × 1/36 in)
KS K ISO 17751-1-2019 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends — Part 1: Light microscopy method Textiles — Quantitative analysis of cashmere, wool, other specialty
KS B ISO 9345-2-2016 Optics and optical instruments－Microscopes：Imaging distances related to mechanical reference planes－Part 2：Infinity-corrected optical systems
KS B ISO 9345-1-2016 Optics and optical instruments Microscopes - Imaging distances related to mechanical reference planes - Part 1 Tube length 160 mm
KS B ISO 9345-2-2023 Microscopes — Imaging distances related to mechanical reference planes — Part 2: Infinity-corrected optical systems
KS I ISO 8672-2021 Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy —Membrane filter method
KS D ISO 22489-2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy

Danish Standards Foundation, Analysis of the use of light microscope

DS/ISO 10936-2:2010 Optics and photonics - Operation microscopes - Part 2: Light hazard from operation microscopes used in ocular surgery
DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis

International Organization for Standardization (ISO), Analysis of the use of light microscope

ISO 21073:2019 Microscopes — Confocal microscopes — Optical data of fluorescence confocal microscopes for biological imaging
ISO 10934-2:2007 Optics and optical instruments - Vocabulary for microscopy - Part 2: Advanced techniques in light microscopy
ISO/CD 25498:2023 Microbeam analysis — Analytical electron microscopy — Selected area electron diffraction analysis using a transmission electron microscope
ISO 9344:1996 Optics and optical instruments - Microscopes - Graticules for eyepieces
ISO 11884-1:2006 Optics and photonics - Minimum requirements for stereomicroscopes - Part 1: Stereomicroscopes for general use
ISO 27911:2011 Surface chemical analysis - Scanning-probe microscopy - Definition and calibration of the lateral resolution of a near-field optical microscope
ISO 8036-1:1986 Optics and optical instruments; Microscopes; Part 1 : Immersion oil for general use in light microscopy
ISO 11884-2:2007 Optics and photonics - Minimum requirements for stereomicroscopes - Part 2: High performance microscopes
ISO 11884-1:1998 Optics and optical instruments - Minimum requirements for stereomicroscopes - Part 1: Stereomicroscopes for general use
ISO 10936-2:2001 Optics and optical instruments - Operation microscopes - Part 2: Light hazard from operation microscopes used in ocular surgery
ISO 10936-2:2010 Optics and photonics - Operation microscopes - Part 2: Light hazard from operation microscopes used in ocular surgery
ISO/TS 21383:2021 Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
ISO 15362:1998 Optics and optical instruments - Stereomicroscopes - Information provided to the user
ISO 18115-2:2010 Analyse chimique des surfaces — Vocabulaire — Partie 2: Termes utilisés en microscopie à sonde à balayage (Première édition)
ISO 18337:2015 Surface chemical analysis - Surface characterization - Measurement of the lateral resolution of a confocal fluorescence microscope
ISO/WD TR 23683:2023 Surface chemical analysis — scanning probe microscopy — Guideline for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy
ISO 19056-1:2015 Microscopes - Definition and measurement of illumination properties - Part 1: Image brightness and uniformity in bright field microscopy
ISO 11952:2014 Surface chemical analysis - Scanning-probe microscopy - Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 19214:2017 Microbeam analysis - Analytical electron microscopy - Method of determination for apparent growth direction of wirelike crystals by transmission electron microscopy
ISO 14880-2:2006 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations
ISO 21222:2020 Surface chemical analysis — Scanning probe microscopy — Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method
ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties
ISO 23729:2022 Surface chemical analysis — Atomic force microscopy — Guideline for restoration procedure for atomic force microscopy images dilated by finite probe size
ISO 24639:2022 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
ISO/DIS 23124:2023 Surface Chemical Analysis — Measurement of lateral and axial resolutions of Raman microscope
ISO 11039:2012 Surface chemical analysis - Scanning-probe microscopy - Measurement of drift rate
ISO 28600:2011 Surface chemical analysis - Data transfer format for scanning-probe microscopy
ISO/FDIS 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
ISO 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
ISO 14880-3:2006 Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations
ISO 9345-1:1996 Optics and optical instruments - Microscopes - Imaging distances related to mechanical reference planes - Part 1: Tube length 160 mm
ISO 21466:2019 Microbeam analysis — Scanning electron microscopy — Method for evaluating critical dimensions by CD-SEM
ISO 29301:2017 Microbeam analysis - Analytical electron microscopy - Methods for calibrating image magnification by using reference materials with periodic structures
ISO 18115-2:2013 Surface chemical analysis.Vocabulary.Part 2: Terms used in scanning-probe microscopy
ISO 11952:2019 Surface chemical analysis — Scanning-probe microscopy — Determination of geometric quantities using SPM: Calibration of measuring systems
ISO 11775:2015 Surface chemical analysis - Scanning-probe microscopy - Determination of cantilever normal spring constants
ISO 9345-2:2003 Optics and optical instruments - Microscopes: Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems
ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
ISO 7404-5:2009 Methods for the petrographic analysis of coals - Part 5: Method of determining microscopically the reflectance of vitrinite
ISO 4407:2002 Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope
ISO 17751-1:2023 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends — Part 1: Light microscopy method
ISO 13095:2014 Surface Chemical Analysis - Atomic force microscopy - Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement
ISO/FDIS 17751-1 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends — Part 1: Light microscopy method
ISO 17751-1:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light microscopy method
ISO 16592:2006 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 16592:2012 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method
ISO 22262-2:2014 Air quality - Bulk materials - Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
ISO 9241-333:2017 Ergonomics of human-system interaction - Part 333: Stereoscopic displays using glasses
ISO 9345-2:2014 Microscopes - Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems
ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
ISO 21915-2:2020 Textiles — Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends — Part 2: Blend quantification using light microscopy method
ISO 9345:2019 Microscopes — Imaging distances related to mechanical reference planes — Part 2: Infinity-corrected optical systems
ISO 18115-3:2022 Surface chemical analysis — Vocabulary — Part 3: Terms used in optical interface analysis
ISO 12609-2:2013 Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications.Part 2: Guidance for use
ISO 21915-1:2020 Textiles — Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends — Part 1: Fibre identification using scanning electron microscopy and spectral analysis meth
ISO 14594:2003 Analyse par microfaisceaux - Analyse par microsonde électronique (Microsonde de Castaing) - Lignes directrices pour la détermination des paramètres expérimentaux pour la spectrométrie à dispersion de longueur d'onde
ISO 14594:2014 Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
ISO 20706-1:2019 Textiles — Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends — Part 1: Fibre identification using microscopy methods

Professional Standard - Medicine, Analysis of the use of light microscope

YY 1296-2016 Optical and Photonic Surgical Microscopes Photohazards of Ophthalmic Surgical Microscopes

German Institute for Standardization, Analysis of the use of light microscope

DIN 58629-1:2006 Optics and optical instruments - Vocabulary for microscopy - Part 1: Light microscopy
DIN 58959-4:1997-06 Quality management in medical microbiology - Part 4: Requirements for investigations using light microscopes / Note: To be replaced by DIN 58959-6 Beiblatt 2 (2021-08, t).
DIN ISO 12853:2005 Optics and optical instruments - Microscopes - Information provided to the user (ISO 12853:1997)
DIN ISO 8038-2:2006 Optics and optical instruments - Microscopes - Screw threads for objectives and related nosepieces - Part 2: Screw thread type M 25 x 0,75 mm (ISO 8038-2:2001);English version of DIN ISO 8038-2:2006
DIN EN ISO 14880-2:2007 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations (ISO 14880-2:2006); English version of DIN EN ISO 14880-2:2007-03
DIN ISO 8038-1:2006 Optics and optical instruments - Microscopes - Screw threads for objectives and related nosepieces - Part 1: Screw thread type RMS (4/5 in x 1/36 in) (ISO 8038-1:1997);English version of DIN ISO 8038-1:2006
DIN ISO 9345-2:2005 Optics and optical instruments - Microscopes - Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems (ISO 9345-2:2003)
DIN 53943-3:1983 Testing of textiles; cotton fibre maturity; determination of the percent maturity; microscopic method using a polarisation microscope
DIN EN ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006) English version of DIN EN ISO 14880-4:2006-08
DIN EN ISO 14880-3:2006 Optics and photonics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations (ISO 14880-3:2006) English version of DIN EN ISO 14880-3:2006-08
DIN 58943-32:1995 Medical microbiology - Diagnosis of tuberculosis - Part 32: Detection of mycobacteria by microscopic methods
DIN EN ISO 17751-1:2022-09 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends - Part 1: Light microscopy method (ISO/DIS 17751-1:2022); German and English version prEN ISO 17751-1:2022 / Note: Date of issue 2022-08-19*Intended as r...
DIN EN ISO 17751-1:2016-11 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light microscopy method (ISO 17751-1:2016); German version EN ISO 17751-1:2016 / Note: To be replaced by DIN EN ISO 17751-1 (2022-09).
DIN ISO 16592:2015 Microbeam analysis - Electron probe microanalysis - Guidelines for determining the carbon content of steels using a calibration curve method (ISO 16592:2012)
DIN 58943-32:2011 Medical microbiology - Diagnosis of tuberculosis - Part 32: Detection of mycobacteria by microscopic methods; Text in German and English
DIN 58943-32:2015 Medical microbiology - Diagnosis of tuberculosis - Part 32: Detection of mycobacteria by microscopic methods; Text in German and English
DIN EN ISO 9241-333:2017 Ergonomics of human-system interaction - Part 333: Stereoscopic displays using glasses (ISO 9241-333:2017)
DIN EN ISO 9241-333:2017-08 Ergonomics of human-system interaction - Part 333: Stereoscopic displays using glasses (ISO 9241-333:2017); German version EN ISO 9241-333:2017
DIN 50452-1:1995 Testing of materials for semiconductor technology - Test method for particle analysis in liquids - Part 1: Microscopic determination of particles

Japanese Industrial Standards Committee (JISC), Analysis of the use of light microscope

JIS T 10936-2:2014 Operation microscopes.Part 2: Light hazard from operation microscopes used in ocular surgery
JIS K 3850-1:2006 Determination of airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
JIS K 3850-1:2000 Measuring method for airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
JIS K 0147-2:2017 Surface chemical analysis -- Vocabulary -- Part 2: Terms used in scanning-probe microscopy
JIS K 0189:2013 Microbeam analysis.Electron probe microanalysis.Determination of experimental parameters for wavelength dispersive X-ray spectroscopy
JIS B 7132-2:2009 Microscopes -- Imaging distances related to mechanical reference planes -- Part 2: Infinity-corrected optical systems
JIS L 1030-4-2:2023 Textiles -- Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends -- Part 4-2: Blend quantification using light microscopy method
JIS B 7132-2:2022 Microscopes -- Imaging distances related to mechanical reference planes -- Part 2: Infinity-corrected optical systems
JIS L 1030-4-1:2023 Textiles -- Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends -- Part 4-1: Fibre identification using scanning electron microscopy and spectral analysis methods
JIS H 8680-3:1998 Test methods for thickness of anodic oxide coatings on aluminium and aluminium alloys -- Part 3: Non-destructive measurement by split-beam microscope

Taiwan Provincial Standard of the People's Republic of China, Analysis of the use of light microscope

CNS 11018-1984 Method of Preparing Coal Samples for Microscopical Analysis by Reflected Light

American Society for Testing and Materials (ASTM), Analysis of the use of light microscope

ASTM D3997-97 Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM D3997-97(2004) Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM D2797/D2797M-09 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM F728-81(1997)e1 Standard Practice for Preparing An Optical Microscope for Dimensional Measurements
ASTM F72-95(2001) Standard Specification for Gold Wire for Semiconductor Lead Bonding
ASTM D3997/D3997M-97(2009) Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM D3997/D3997M-16 Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
ASTM D5671-95(2011) Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
ASTM D2797/D2797M-11a(2019) Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D2797/D2797M-20 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D2797/D2797M-20a Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D2797-85(1999) Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D5671-95(2005) Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
ASTM D2797/D2797M-11 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D8075-16 Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite
ASTM D8075-16(2021) Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite
ASTM F3294-18 Standard Guide for Performing Quantitative Fluorescence Intensity Measurements in Cell-based Assays with Widefield Epifluorescence Microscopy
ASTM D4616-95(2000) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D4616-95 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM D4616-95(2018) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM E1588-95(2001) Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM E1588-08 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-10 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-95 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM D3849-02 Standard Test Method for Carbon Black-Morphological Characterization of Carbon Black Using Electron Microscopy
ASTM D3849-04 Standard Test Method for Carbon Black-Morphological Characterization of Carbon Black Using Electron Microscopy
ASTM D7416-08 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Coun
ASTM C978-04(2019) Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
ASTM E2090-06 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM E2090-12(2020) Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
ASTM E2809-13 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations
ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM D2797/D2797M-21 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D2797/D2797M-21a Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D2797-07 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D2797-04 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM E3275-21 Standard Guide for Visualization and Identification of Nanomaterials in Biological and Nonbiological Matrices Using Darkfield Microscopy/Hyperspectral Imaging (DFM/HSI) Analysis
ASTM D7391-09 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM D5671-95(2001) Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
ASTM D5671-95(2019) Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
ASTM D5671-95 Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
ASTM D5671-20 Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
ASTM E1588-20 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM D4616-95(2005) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
ASTM C978-87(1996) Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
ASTM C978-02 Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
ASTM C978-04 Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
ASTM C978-04(2009) Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
ASTM B651-83(2019) Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope
ASTM C978-04(2014) Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
ASTM E280-98(2004)e1 Standard Reference Radiographs for Heavy-Walled (4 &189; to 12-in. [114 to 305-mm]) Steel Castings
ASTM E280-21 Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
ASTM E2809-22 Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
ASTM D5756-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
ASTM D5756-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
ASTM D5755-03 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
ASTM D5755-09 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
ASTM D5755-09(2014)e1 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
ASTM E3309-21 Standard Guide for Reporting of Forensic Primer Gunshot Residue (pGSR) Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
ASTM F1372-93(2005) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2012) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D5755-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
ASTM D5755-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
ASTM D5756-02(2008) Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading
ASTM D8526-23 Standard Test Method for Analytical Procedure Using Transmission Electron Microscopy for the Determination of the Concentration of Carbon Nanotubes and Carbon Nanotube-containing Particles in Ambient
ASTM D7391-17 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM D7391-20 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM D7391-17e1 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM E406-81(1996) Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis

American National Standards Institute （ANSI), Analysis of the use of light microscope

ANSI/TIA/EIA 573C000-1998 Sectional Specification for Field-Portable Optical Microscopes
ANSI/TAPPI T421 om-2012 Qualitative (including optical microscopic) analysis of mineral filler and mineral coating of paper
ANSI/EIA/TIA 546AAOO:1989 Blank Detail Specification for Field Portable Optical Microscopes for Inspection of Optical Waveguides and Related Devices / Note: Approved 1989-07-10.

RU-GOST R, Analysis of the use of light microscope

GOST R ISO 27911-2015 State system for ensuring the uniformity of measurements. Surface chemical analysis. Scanning-probe microscopy. Definition and calibration of the lateral resolution of a near-field optical microscope
GOST 15114-1978 Telescope system for optical devices. Visual method of resolution limits determination
GOST ISO 4407-2006 Industrial cleanliness. Determination of fluid contamination by the counting method using an optical microscope

Standard Association of Australia （SAA）, Analysis of the use of light microscope

AS 2856.1:2000(R2013)
AS 2856.1:2000 Coal petrography - Preparation of coal samples for incident light microscopy

国家市场监督管理总局、中国国家标准化管理委员会, Analysis of the use of light microscope

GB/T 35098-2018 Microbeam analysis—Transmission electron microscopy—Morphological identification method of plant viruses by transmission electron microscopy
GB/T 40905.1-2021 Textiles—Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends—Part 1: Light microscopy method

European Committee for Standardization (CEN), Analysis of the use of light microscope

EN ISO 14880-2:2006 Optics and photonics - Microlens arrays - Part 2: Test methods for wavefront aberrations
EN ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties
EN ISO 14880-3:2006 Optics and phonotics - Microlens arrays - Part 3: Test methods for optical properties other than wavefront aberrations
EN ISO 17751-1:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light Microscopy method (ISO 17751-1:2016)
EN ISO 9241-333:2017 Ergonomics of human-system interaction - Part 333: Stereoscopic displays using glasses
FprEN ISO 17751-1 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light microscopy method (ISO/FDIS 17751-1:2023)
EN ISO 17751-1:2023 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light microscopy method (ISO 17751-1:2023)
EN ISO 20706-1:2019 Textiles - Qualitative and quantitative analysis of some bast fibres (flax, hemp, ramie) and their blends - Part 1: Fibre identification using microscopy methods (ISO 20706-1:2019, Corrected version 2020-03)

TIA - Telecommunications Industry Association, Analysis of the use of light microscope

EIA-546A000-1989 Sectional Specification for a Field Portable Optical Microscope for Inspection of Optical Waveguides and Related Devices
EIA/TIA-546AA00-1990 Blank Detail Specification for Field Portable Optical Microscopes for Inspection of Optical Waveguides and Related Devices
TIA/EIA-455-45-B-1992 FOTP-45 Method for Measuring Optical Fiber Geometry Using a Laboratory Microscope (Withdrawn May@ 2003)

AENOR, Analysis of the use of light microscope

UNE 32300:1995 COAL AND ANTHRACITE. PETROGRAPHY. METHODS OF PREPARING COAL SAMPLES FOR MICROSCOPIC ANALYSIS.
UNE 32301:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MICROSCOPICALLY THE REFLECTANCE OF VITRINITE.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Analysis of the use of light microscope

GB/T 42659-2023 Surface Chemical Analysis Scanning Probe Microscopy Determination of Geometric Quantities Using Scanning Probe Microscopy: Measurement System Calibration
GB/T 20082-2006 Hydraulic fluid power-Fluid contamination-Determination of particulate contamination by the counting method using an optical microscope
GB/T 17507-2008 General specification of thin biological standards for X-ray EDS microanalysis in transmission electron microscope
GB/T 22057.2-2008 Microscopes-Imaging distances related to mechanical reference planes-Part 2:Infinity-corrected optical systems

未注明发布机构, Analysis of the use of light microscope

JIS K 0182:2023 Surface chemical analysis -- Scanning-probe microscopy -- Determination of cantilever normal spring constants
BS EN ISO 17751-1:2023 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends Part 1 : Light microscopy method

未注明发布机构, Analysis of the use of light microscope

JIS K 0182:2023 Surface chemical analysis -- Scanning-probe microscopy -- Determination of cantilever normal spring constants
BS EN ISO 17751-1:2023 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends Part 1 : Light microscopy method

PL-PKN, Analysis of the use of light microscope

PN Z04097 Arkusz 01-1974 Air purity protection Tests for the size composition of dust Measurement of quantitative distribution of projective dust particie size ^2 (im with micros- cope without using of immersion li?uid

ES-UNE, Analysis of the use of light microscope

UNE-EN ISO 17751-1:2016 Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light Microscopy method (ISO 17751-1:2016)
UNE-EN ISO 9241-333:2017 Ergonomics of human-system interaction - Part 333: Stereoscopic displays using glasses (ISO 9241-333:2017) (Endorsed by Asociación Española de Normalización in July of 2017.)

HU-MSZT, Analysis of the use of light microscope

MSZ 14340/3-1979

IT-UNI, Analysis of the use of light microscope

UNI 6500-1969

International Electrotechnical Commission (IEC), Analysis of the use of light microscope

IEC 62629-12-1 3D Display devices.Part 12-1: Measuring methods for stereoscopic displays using glasses – Optical
IEC 62629-12-1:2014 3D display devices - Part 12-1: Measuring methods for stereoscopic displays using glasses - Optical