ZH
RU
ES

How to Test for Conductivity

How to Test for Conductivity, Total:499 items.

In the international standard classification, How to Test for Conductivity involves: Semiconductor devices, Electrical wires and cables, Water quality, Non-destructive testing, Integrated circuits. Microelectronics, Electrical engineering in general, Heat recovery. Thermal insulation, Products of non-ferrous metals, Materials for aerospace construction, Electricity. Magnetism. Electrical and magnetic measurements, On-board equipment and instruments, Insulating fluids, Insulating materials, Printed circuits and boards, Surface treatment and coating, Conducting materials, Electromechanical components for electronic and telecommunications equipment, Testing of metals, Power transmission and distribution networks, Lubricants, industrial oils and related products, Burners. Boilers, Corrosion of metals, Test conditions and procedures in general, Radiation measurements, Optics and optical measurements, Electronic tubes, Telecommunication systems, Components and accessories for telecommunications equipment, Protection against fire, Adhesives, Raw materials for rubber and plastics, Electrical and electronic testing, Products of the chemical industry, Piezoelectric and dielectric devices, Pulps, Electrical accessories, Pipeline components and pipelines, Optoelectronics. Laser equipment, Farming and forestry, Continuous handling equipment, Welding, brazing and soldering, Electronic component assemblies, Rectifiers. Convertors. Stabilized power supply, Refractories, Nuclear energy engineering, Acoustics and acoustic measurements, Analytical chemistry, Soil quality. Pedology, Semiconducting materials, Shipbuilding and marine structures in general, Aerospace electric equipment and systems, Environmental testing, Agricultural machines, implements and equipment, Organic chemicals, Fuel cells, Installations in buildings, Electromagnetic compatibility (EMC), Ceramics, Petroleum products in general, Fuels, Power stations in general, Components for electrical equipment, Internal combustion engines, Railway rolling stock, Iron and steel products, Paper and board, Astronomy. Geodesy. Geography, Radiocommunications, Mobile services, Road vehicle systems, Plastics, Geology. Meteorology. Hydrology, Construction materials.

British Standards Institution (BSI), How to Test for Conductivity

BS EN 62047-3:2006 Semiconductor devices - Micro-electromechanical devices - Thin film standard test piece for tensile testing
BS DD IEC/PAS 62596:2009 Electrotechnical products - Determination of restricted substances - Sampling procedure - Guidelines
BS 6043-3.1.2:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of anodes
BS 6043-3.1.1:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of cathodes
BS DD IEC/PAS 61338-1-5:2010 Waveguide type dielectric resonators - General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
BS EN 61338-1-5:2015 Waveguide type dielectric resonators. General information and test conditions. Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
BS 6043-2.1:1985 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling
BS IEC 62899-202-5:2018 Printed electronics - Materials. Conductive ink. Mechanical bending test of a printed conductive layer on an insulating substrate
PD IEC/TR 62878-2-2:2015 Device embedded substrate. Guidelines. Electrical testing
BS 6043-1.1:2002 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Sampling. Section 1.1: Sampling
BS IEC 62951-6:2019 Semiconductor devices. Flexible and stretchable semiconductor devices - Test method for sheet resistance of flexible conducting films
BS EN 61395:1998 Overhead electrical conductors. Creep test procedures for stranded conductors
BS EN 17294:2019 Animal feeding stuffs. Methods of sampling and analysis. Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
BS EN ISO 18592:2019 Resistance welding. Destructive testing of welds. Method for the fatigue testing of multi-spot-welded specimens
BS EN 61620:1999 Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method
BS EN 61000-4-6:1996 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Results of interlaboratory testing of poly(methyl methacrylate) samples
BS ISO 23331:2021 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for total electrical conductivity of conductive fine ceramics
PD ISO/TR 6307:2023 Effect of conductivity on multipass testing as per ISO 4548-12:2017
BS EN 61788-6:2011 Superconductivity. Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
BS EN 50702:2021 Railway applications. Rolling stock. Conductor rail current collectors (shoegear): Characteristics and tests
BS EN IEC 61000-4-20:2022 Tracked Changes. Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
BS IEC 62951-1:2017 Semiconductor devices. Flexible and stretchable semiconductor devices - Bending test method for conductive thin films on flexible substrates
23/30448070 DC BS EN IEC 61810-7-0. Electrical relays. Tests and Measurements - Part 7-0. General and Guidance
BS EN 61000-4-20:2010 Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
BS EN 61000-4-20:2011 Electromagnetic compatibility (EMC). Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides
BS EN 3475-505:2023 Tracked Changes. Aerospace series. Cables, electrical, aircraft use. Test methods. Tensile test on conductors and strands

Group Standards of the People's Republic of China, How to Test for Conductivity

T/CAS 529-2021 Test methods of conductor DC resistance for short samples of electric cables and wires
T/CSEE 0209-2021 Guidelines for testing low-voltage power emergency power supply equipment
T/CEC 611-2022 Technical Guidelines for Acoustic Imaging Testing of Substation Equipment
T/CSEE 0114-2019 Injection capacitive current test guide for neutral point different frequency signal
T/CIMA 0007-2020 Test guideline for synchronous line loss measuring device of distribution network
T/ZGIA 001-2019 Graphene test method for the determination of powder conductivity four-probe method
T/CEC 618-2022 Guidelines for testing interconnection devices of AC and DC hybrid power distribution systems
T/CES 185-2022 The guideline for on-site partial discharge testing of 66kV～220kV power cables based on damped AC voltage excited by AC source

PL-PKN, How to Test for Conductivity

PN C99460-09-1986 Sampling of photographic light sensitive materials for testing Guide sampling of aerofilms
PN T04850-1974 Transmiliing tubes Elec?rical ?es?s
PN E04160 ArkusZ54-1973 Electric cables Me?hods of ?esting Te?t for resistant againt? gluing ol con- duc?ors
PN E04160-68-1988 Electric cables Methods of test Electrical test of conducting polymeric screen
PN E04410-15-1986 Electroinsulating varnishes Test methods Samples preparation
PN E04605-02-1992 Electrical and electronic products Basic cnvironmental testing procedures Test Eb and guidance: bump
PN E04605-05-1992 Electrical and electronic products Basic environmental testing procedures Test Ee and guidance: bounce
PN E04160 ArkusZ84-1973 Bectric cables Methods ot testing Measuring ot the transfer admi??ance due to electric coupling
PN C82055-08-1990 Test methods of pressed carbon products Determination of resistivity on samples

American Society for Testing and Materials (ASTM), How to Test for Conductivity

ASTM D5391-99 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D5391-99(2005) Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM E423-71(2019) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM D5391-99(2009) Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D117-96 Standard Guide for Sampling, Test Methods, Specifications, and Guide for Electrical Insulating Oils of Petroleum Origin
ASTM D3394-16 Standard Test Methods for Sampling and Testing Electrical Insulating Board
ASTM D5391-23 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D5391-14 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
ASTM D4399-05(2023) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4496-21 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
ASTM D4399-05 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM B826-09 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
ASTM E423-71(2014) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
ASTM D4399-90(1999) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D2739-97 Standard Test Method for Volume Resistivity of Conductive Adhesives
ASTM B193-02 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-00 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-01 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM D1125-95(1999) Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM B193-87(1992) Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-19 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-87 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM B193-20 Standard Test Method for Resistivity of Electrical Conductor Materials
ASTM D3376-88(2000) Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM D4399-05e1 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4399-05(2011) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4399-05(2017) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D3376-88(2005) Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM D3376-18 Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM B342-63(1980)e1 Test Method for Electrical Conductivity by Use of Eddy Currents
ASTM F1896-10 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM C483-95(2000) Standard Test Method for Electrical Resistance of Conductive Ceramic Tile (Withdrawn 2004)
ASTM D5128-90(1999)e1 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D6035-08 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
ASTM E1004-09 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
ASTM E2775-16 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction
ASTM D202-97(2002)e1 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
ASTM D202-08 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
ASTM D6035/D6035M-13 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
ASTM F1896-98(2004) Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM E1004-17 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
ASTM F1896-16 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM F1896-98 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
ASTM D5128-90(2005) Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D5128-09 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D5015-95 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D5015-02 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D5015-15(2022) Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D257-14(2021)e1 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM D5015-02(2008) Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D2624-09 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM E1161-95 Standard Test Method for Radiologic Examination of Semiconductors and Electronic Components
ASTM D2624-00 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
ASTM D6035/D6035M-19 Standard Test Methods for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
ASTM B63-07(2018) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
ASTM D5139-10 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM D6035-02 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Undisturbed Soil Specimens Using a Flexible Wall Permeameter
ASTM D6035-96 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Undisturbed Soil Specimens Using a Flexible Wall Permeameter
ASTM D4308-95(2005) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-95(2000)e1 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D5464-93(2001) Standard Test Methods for pH Measurement of Water of Low Conductivity
ASTM D5128-14(2022) Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D4308-95(2010) Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D4308-10 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ASTM D5464-16 Standard Test Method for pH Measurement of Water of Low Conductivity
ASTM D5128-14 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
ASTM D1677-02 Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
ASTM D1677-86(1993)e1 Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
ASTM D5139-12 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM D6391-11(2020) Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration

HU-MSZT, How to Test for Conductivity

CL-INN, How to Test for Conductivity

IN-BIS, How to Test for Conductivity

Association Francaise de Normalisation, How to Test for Conductivity

NF EN 62047-3:2006 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 3 : éprouvettes d'essai normalisée en couche mince pour l'essai de traction
NF X10-021:1972 Matériaux faiblement conducteurs - Détermination de la conductivité thermique - Méthode de la plaque chaude gardée avec échantillons symétriques
NF EN 62415:2010 Dispositifs à semiconducteurs - Essai d'électromigration en courant constant
NF EN ISO 284:2013 Courroies transporteuses - Conductibilité électrique - Spécification et méthode d'essai
NF V18-217*NF EN 17294:2019 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
NF EN 17294:2019 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Dosage des acides organiques par chromatographie ionique avec détection conductimétrique (CI-DC)
NF C53-225:1985 Testing of semiconductor valves for high-voltage D.C. Power transmission.
NF EN 61338-1-5:2015 Résonateurs diélectriques à modes guidés - Partie 1-5 : informations générales et conditions d'essais - Méthode de mesure de la conductivité au niveau de l'interface entre une couche conductrice et un substrat diélectrique fonctionnant aux h...
NF A89-570:2002 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds.
NF EN 62567:2014 Lignes électriques aériennes - Méthodes d'essai des caractéristiques d'auto-amortissement des conducteurs
NF EN 61620:1999 Isolants liquides - Détermination du facteur de dissipation diélectrique par la mesure de la conductance et de la capacité - Méthode d'essai.
NF EN 60332-1-1/A1:2015 Essais des câbles électriques et à fibres optiques soumis au feu - Partie 1-1 : essai de propagation verticale de la flamme sur conducteur ou câble isolé - Appareillage d'essai
NF EN 60332-1-1:2005 Essais des câbles électriques et à fibres optiques soumis au feu - Partie 1-1 : essai de propagation verticale de la flamme sur conducteur ou câble isolé - Appareillage d'essai
NF EN 61788-14:2014 Supraconductivité - Partie 14 : dispositifs supraconducteurs de puissance - Exigences générales pour les essais de caractéristiques d'amenées de courant conçus pour alimenter des dispositifs supraconducteurs
NF T90-111:1975 Water testing - Estimate of dissolved salt content from the determination of theoretical electrical conductivity
NF Q03-067:1981 Paper, board and pulp tests. Determination of conductivity of aqueous extracts.
NF C91-004-20*NF EN IEC 61000-4-20:2022 Electromagnetic compatibility (EMC) - Part 4-20 : testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
NF EN 61000-4-31:2017 Compatibilité électromagnétique (CEM) - Partie 4-31 : techniques d'essai et de mesure - Essai d'immunité aux perturbations conduites à large bande sur les accès d'alimentation secteur en courant alternative
NF F21-702*NF EN 50702:2021 Railway applications - Rolling stock - Conductor rail current collectors (shoegear) : characteristics and tests
NF EN ISO 23908:2013 Protection contre les blessures par perforants - Exigences et méthodes d'essai - Dispositifs de protection des aiguilles hypodermiques, des introducteurs pour cathéters et aiguilles utilisées pour les prélèvements sanguins, non réutilisables
NF C32-074:1993 TEST ON GASES EVOLVED DURING THE COMBUSTION OF MATERIALS FROM CABLES. DETERMINATION OF DEGREE OF ACIDITY (CORROSIVITY) OF GASES BY MEASURING PH AND CONDUCTIVITY.
NF C91-004-31*NF EN 61000-4-31:2017 Electromagnetic compatibility (EMC) - Part 4-31 : testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test
NF ISO 16525-1:2014 Adhésifs - Méthodes d'essai pour adhésifs à conductivité électrique isotrope - Partie 1 : méthodes d'essai générales

German Institute for Standardization, How to Test for Conductivity

DIN EN 17294:2019-12 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by lon Chromatography with Conductivity Detection (IC-CD); German version EN 17294:2019
DIN EN 62415:2010-12 Semiconductor devices - Constant current electromigration test (IEC 62415:2010); German version EN 62415:2010
DIN EN ISO 284:2013-04 Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012); German version EN ISO 284:2012
DIN 19683-9:2012 Soil quality - Physical laboratory tests - Part 9: Determination of the saturated hydraulic water conductivity in the cylindrical core-cutter
DIN EN 17294:2019 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by lon Chromatography with Conductivity Detection (IC-CD)
DIN EN ISO 14272:2016-11 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds (ISO 14272:2016); German version EN ISO 14272:2016
DIN EN ISO 14273:2016-11 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds (ISO 14273:2016); German version EN ISO 14273:2016
DIN 51412-2:2013 Testing of petroleum products.Determination of the electrical conductivity.Part 2: Field method
DIN 51412-2:2006 Testing of petroleum products - Determination of the electrical conductivity - Part 2: Field method
DIN EN 61338-1-5:2016-04 Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency (IEC 61338-1-5:2015); German version EN 6...
DIN 50448:1998 Testing of materials for semiconductor technology - Contactless determination of the electrical resistivity of semi-insulating semi-conductor slices using a capacitive probe
DIN 51412-2:2013-01 Testing of petroleum products - Determination of the electrical conductivity - Part 2: Field method
DIN EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method (IEC 61620:1998); German version EN 61620:1999
DIN EN 60749-27:2013-04 Semiconductor devices - Mechanical and climatic test methods - Part 27: Electrostatic discharge (ESD) sensitivity testing - Machine model (MM) (IEC 60749-27:2006 + A1:2012); German version EN 60749-27:2006 + A1:2012 / Note: DIN EN 60749-27 (2007-01) re...
DIN EN ISO 14270:2016-11 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016); German version EN ISO 14270:2016
DIN EN ISO 23908:2013-10 Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling (ISO 23908:2011); German version EN ISO 23908:2013
DIN 51412-1:2005-06 Testing of petroleum products - Determination of the electrical conductivity - Part 1: Laboratory method
DIN 57472-625:1983 Testing of cables, wires and flexible cords; traction relief for cables and insulated wires by strain-bearing elements [VDE Specification]
DIN EN 3475-505:2023-05 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands; German and English version EN 3475-505:2023

工业和信息化部/国家能源局, How to Test for Conductivity

JB/T 12727.3-2016 Non-destructive testing instrument specimens Part 3: Electromagnetic (eddy current) testing specimens
JB/T 13537-2018 Test method for volume resistivity of conductive powder for electromagnetic shielding
JB/T 13536-2018 Test method for magnetic permeability of electromagnetic shielding and absorbing materials

Japanese Industrial Standards Committee (JISC), How to Test for Conductivity

JIS C 5630-3:2009 Semiconductor devices -- Micro-electromechanical devices-- Part 3: Thin film standard test piece for tensile testing
JIS K 7194:1994 Testing method for resistivity of conductive plastics with a four-point probe array

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to Test for Conductivity

GB/T 14115-1993 General principles of measuring methods of Sample/Hold amplifiers for semiconductor integrated circuits
GB/T 28030-2011 Earth continuity tester
GB/T 12631-1990 Test method for resistance of conductor of printed boards
GB/T 1550-1997 Standard methods for measuring conductivity type of extrinsic semiconducting materials
GB/T 5201-1994 Test procedures for semiconductor charged particle detectors
GB/T 32206-2015 Standard practice for testing electrolytic conductivity detectors used in gas chrometography
GB/T 15662-1995 Method of testing volume resistivity of conducting and antistatic plastics
GB/T 12966-1991 The method for electrical conductivity measurement of aluminium alloys by use of eddy current
GB/T 12966-2008 The method for determining aluminum alloys conductivity using eddy current
GB/T 42838-2023 Semiconductor Integrated Circuit Hall Circuit Test Method
GB/T 4825.1-1984 Test method for partial discharge of conductors on printed boards
GB/T 4377-2018 Semiconductor integrated circuits.Measuring method of voltage regulators
GB 12201-1990 Test methods of VSWR of the waveguide feed-system for marine radar
GB/T 32791-2016 Electromagnetic (eddy-current) examination method for electrical conductivity of copper and copper alloys
GB/T 22586-2008 Measurements of surface resistance of high temperature superconductor thin films at microwave frequencies
GB/T 42975-2023 Semiconductor integrated circuit driver test methods
GB/T 6833.9-1987 Electromagnetic compatibility test specification forelectronic measuring instruments--Conduced interference test
GB/T 3789.6-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of transconductance and amplification factor
GB/T 42970-2023 Semiconductor integrated circuit video encoding and decoding circuit testing methods
GB/T 6833.6-1987 Electromagnetic compatibility test specification for electronic measuring instruments--Conducted susceptibility test
GB 35007-2018 Semiconductor integrated circuit low voltage differential signal circuit testing method
GB/T 43061-2023 Semiconductor integrated circuit PWM controller testing method
GB/T 2423.7-1995 Environmental testing for electric and electronic products. Test 2:Test methods. Test Ec and guidance:Drop and topple. Primarily for equipment-type specimens
GB/T 6616-2023 Non-contact eddy current method for testing semiconductor wafer resistivity and semiconductor film sheet resistance
GB/T 36477-2018 Semiconductor integrated circuit.Measuring methods for flash memory
GB/T 43040-2023 Semiconductor integrated circuit AC/DC converter testing method
GB/T 14030-1992 General principles of measuring methods of timer circuits for semiconductor integrated circuits
GB 14030-1992 Basic principles of semiconductor integrated circuit time-based circuit testing methods
GB/T 6798-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage comparators
GB/T 4377-1996 Semiconductor integrated circuits. General principles of measuring methods of voltage regulator
GB/T 15136-1994 General principles of measuring methods for quartz clock and watch circuits of semiconductor integrated circuits
GB/T 14862-1993 Junction-to-case thermal resistance test methods of packages for semiconductor integrated circuits

CZ-CSN, How to Test for Conductivity

CSN 34 7007-1964 Power conductors and cables. Testing.
CSN 35 8548-1969 Methods of testing admittance of electron ic tubes
CSN 35 8537-1968 Methods of testing mutual conductance of eleotronio tubes
CSN 34 7171-1965 Breakdown voltage test. Wires. Conductors for winding
CSN 56 0161-4-1996 Methods for testing of liquid sugars. Determination of ash by conductometric method.
CSN 50 0450-1987 Condenser páper. Determination of the number of conducting paths
CSN 64 0141-1953
CSN 35 8538-1968 Methods of testing conversion transconductance of eleetronic tubes
CSN 01 5057-1988 Non-destructive testing. Testing of tubes from non-ferrous metals and alloys by eddy-current method
CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity
CSN 34 5791 Cast.2-10-1989 Electrotechnical and electronic products. Basic environmental testing procedures.Test J and guidence: Mould growth
CSN 35 1601-1980 Power semiconductor devices. General technical requirements. Testing methods
CSN 46 2520-15-1997 Testing of hops - Part 15: Determination of alpha bitter acid by the conductometric method
CSN 46 2520-14-1997 Testing of hops - Part 14: Determination of the conductometric value of hops by the method MEBAK
CSN 46 2520-13-1997 Testing of hops - Part 13: Determination of the conductometric value of hops by the method EBC

FI-SFS, How to Test for Conductivity

RU-GOST R, How to Test for Conductivity

GOST 28106-1989 Copper cathodes. Sampling and preparation of samples and test pieces for determination of electrical resistivity
GOST 19296-1973 Petroleum oils. Test for soda reaction from petroleum oils. Photoelectric colorimeter method
GOST 7229-1976 Cables, wires and cords. Method of measurement of electrical resistance of conductors
GOST 28106-2015 Copper cathodes. Sampling and preparation of samples and pieces for determination of electrical resistivity
GOST 24461-1980 Power semiconductor devices. Test and measurement methods
GOST 6433.1-1971 Solid electrical insulating materials. Environmental conditions at preparation of samples and testing
GOST R 53781-2010 Lifts. Rules and method of examination (test) and measurement by certification of lifts. Rules of sampling
GOST R 52865-2009 Global navigation satellite system. Parameters radionavigation field. Technical requirements and test methods
GOST R 52865-2007 Global navigation satellite system. Parameters radionavigation field. Technical requirements and test methods

Defense Logistics Agency, How to Test for Conductivity

DLA MIL-DTL-13169 D-2006 WIRE, ELECTRICAL (FOR INSTRUMENT TEST LEADS)
DLA MIL STD 750 3-2012 TEST METHOD STANDARD TRANSISTOR ELECTRICAL TEST METHODS FOR SEMICONDUCTOR DEVICES PART 3: TEST METHODS 3000 THROUGH 3999
DLA MIL STD 750 4 E-2012 TEST METHOD STANDARD DIODE ELECTRICAL TEST METHODS FOR SEMICONDUCTOR DEVICES PART 4: TEST METHODS 4000 THROUGH 4999

Professional Standard - Aerospace, How to Test for Conductivity

QJ 1523-1988 Conductive Adhesive Resistivity Test Method
QJ 259-1977 器件
QJ 257-1977 Semiconductor TTL Integrated Digital Circuit Testing Method
QJ 1528-1988 Semiconductor integrated circuit time base test method
QJ 260-1977 器件
QJ 20022-2011 The electrical measuring method of radome for passive seeker
QJ 1460-1988 Test method for broadband amplifier of semiconductor integrated circuit
QJ 2491-1993 Test methods for operational amplifiers in semiconductor integrated circuits
QJ 2660-1994 Test method for pulse width modulator of semiconductor integrated circuit switching power supply
QJ 2428-1993 Electromagnetic Compatibility Test Method for Tactical Missile Weapon System

KR-KS, How to Test for Conductivity

KS C IEC PAS 62596-2011 Electrotechnical products－Determination of restricted substances－Sampling procedure－Guidelines
KS I 3201-2023 Testing methods for electric conductivity in highly purified water
KS C IEC 61395-2020 Overhead electrical conductors — Creep test procedures for stranded conductors
KS C IEC 61788-21-2020 Superconductivity — Part 21: Superconducting wires — Test methods for practical superconducting wires — General characteristics and guidance
KS C IEC 61788-14-2020 Superconductivity — Part 14: Superconducting power devices —General requirements for characteristic tests of current leads designed for powering superconducting devices
KS C IEC 60754-2-2019 Test on gases evolved during combustion of materials from cables — Part 2: Determination of acidity(by pH measurement) and conductivity

Standard Association of Australia （SAA）, How to Test for Conductivity

AS/NZS 1660.3:1998 Test methods for electric cables, cords and conductors - Electrical tests
AS 3894.1:2002(R2013)
AS 3894.2:2002(R2013)

CU-NC, How to Test for Conductivity

NC 66-100-1988 Electronic and Electrotechical Industry. Power Conductors Electric Tests
NC 90-13-36-1986 Metrological Assurance Conductometers. Testing Methods

AR-IRAM, How to Test for Conductivity

IRAM 2069-1948

National Metrological Verification Regulations of the People's Republic of China, How to Test for Conductivity

JJG 984-2004 Earth-Continuity Testers
JJG(民航) 0092-2006 Verification Regulation of Eddy Current Conductivity Meter
JJG(电子) 310003-2006 Specification for verification of capacitor parameter testers for semiconductor discrete devices

Institute of Electrical and Electronics Engineers (IEEE), How to Test for Conductivity

IEEE No 51-1955 IEEE Guiding Principles for Dielectric Tests
IEEE Std 82-1963 IEEE Test Procedure for Impulse Voltage Tests on Insulated Conductors
IEEE 82-1963 IEEE Test Procedure for Impulse Voltage Tests on Insulated Conductors
IEEE 82-2002 Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
IEEE 82-1994 Test procedure for impulse voltage tests on insulated conductors
IEEE Std 82-2002 IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
IEEE Std 82-1994 IEEE Standard test procedure for impulse voltage tests on insulated conductors
IEEE 82/COR-2009 Errata to IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors
IEEE Std 300-1988 IEEE Standard Test Procedures for Semiconductor Charged-Particle Detectors
ANSI/IEEE Std 300-1982 IEEE Standard Test Procedures for Semiconductor Charged-Particle Detectors
IEEE Std C62.35-1987 IEEE Standard Test Specifications for Avalanche Junction Semiconductor Surge Protective Devices

IX-ICAO, How to Test for Conductivity

ICAO 8071-1-2000 Manual on Testing of Radio Navigation Aids - Volume I: Testing of Ground-based Radio Navigation Systems
ICAO 8071-2-2007 Manual on Testing of Radio Navigation Aids - Volume II: Testing of Satellite-based Radio Navigation Systems
ICAO 8071-2 CORR-2008 Manual on Testing of Radio Navigation Aids - Volume II: Testing of Satellite-based Radio Navigation Systems; Corrigendum
ICAO 8071-3-1998 Manual on Testing of Radio Navigation Aids - Volume III: Testing of Surveillance Radar Systems

YU-JUS, How to Test for Conductivity

JUS N.C0.035-1983 Tatting of insulatad conductors and cables. Measurement of electrical resistance of conductors.
JUS N.C6.005-1981 Ri>dio-frequency cables. Continuity test of the silver coating of inner conductors
JUS N.A5.053-1990 Electrotechnical engineering. Pire bazsrd testivg. Glou-wire test
JUS N.R1.500-1980 Semioonductor ?evices. Acceptance. Electrical tests
JUS N.C0.031-1987 Electric povver and lighting. Testing of insulated conductors and cables. Checking of construction
JUS N.C0.048-1985 Electrical power and lighting. Testing of insulated conductors and cables. Separability of cores of flat twin insulated conductors
JUS N.C0.050-1984 Electrical power andlighting. Tests of insulatedconductors and cables. I/Vear resistance
JUS N.C0.030-1987 E/etric povver and lighting. Testing of insulated conductors and cab/es. General testing conditions
JUS N.C0.082-1990 Electric povverandlighting. Testing ofinsu/atedconductors andcables. Tinning ofplain conductors
JUS N.C0.036-1980 Testing offlexible cords and cables. Measurements ofinsulation resistance, resistance of semi-conducting layers and surface resistance.
JUS N.C0.055-1985 Electric povverandlighting. Testing of insulatedconductors andcables. Hotdeformation
JUS N.C0.052-1984 Electrical povner and lighting. Testing of insulated conductors andcables. Flexibility
JUS N.C0.056-1985 Electrical povverand lighting\ Testing of insulatedconductors andcables. Elasticity atlow temperatures

IPC - Association Connecting Electronics Industries, How to Test for Conductivity

IPC TM-650 2.6.25B-2016 Conductive Anodic Filament (CAF) Resistance Test: X-Y Axis
IPC TM-650 2.6.25A-2012 Conductive Anodic Filament (CAF) Resistance Test: X-Y Axis
IPC 9691A CHINESE-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)
IPC 9691A CD-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)
IPC 9691A CHINESE CD-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)

Korean Agency for Technology and Standards (KATS), How to Test for Conductivity

KS I 3201-2007(2017) Testing methods for electric conductivity in highly purified water
KS C IEC 61395:2014 Overhead electrical conductors — Creep test procedures for stranded conductors
KS C IEC 61395:2020 Overhead electrical conductors — Creep test procedures for stranded conductors
KS C 2129-1996(2001) TESTING METHODS FOR DC RESISTANCE OR CONDUCTANCE OF INSULATING MATERIALS
KS C IEC 61788-21:2020 Superconductivity — Part 21: Superconducting wires — Test methods for practical superconducting wires — General characteristics and guidance
KS M 6773-2014 Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS L 3306-2007(2012) Testing method for thermal conductivity of firebricks by hot wire
KS L 3306-1980 Testing method for thermal conductivity of firebricks by hot wire
KS C 2603-1980(2020) Testing Method for Conductor-Resistance and Resistivity of Metallic Resistance materials
KS L 1619-2013(2018) Testing methods for resistivity of conductive fine ceramic thin films with four point probe array
KS M 6773-2014(2019) Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS M 6773-2009 Testing method for volume resistivity of electrically conductive rubber and plastic materials
KS L 1620-2013(2018) Test methods for measuring resistivity of electrically conductive ceramic thin films with Van der Pauw method
KS C 0243-2016 Environmental testing Part 2：Tests－Test Ec： Drop and topple, primarily for equipment－type specimens
KS C IEC 61788-14:2020 Superconductivity — Part 14: Superconducting power devices —General requirements for characteristic tests of current leads designed for powering superconducting devices
KS C 0267-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASUREMENT TECHNIQNES -IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO FREQUENCY FIELDS
KS C 6111-2004 TEST METHODS OF D.C. CRITICAL CURRENT OF Cu/Nb-Ti COMPOSITE SUPERCONDUCTORS
KS C IEC 60754-2:2019 Test on gases evolved during combustion of materials from cables — Part 2: Determination of acidity(by pH measurement) and conductivity
KS F 2711-2002 Testing method for electrical indication of concrete’s ability to resist chloride ion penetration

Hebei Provincial Standard of the People's Republic of China, How to Test for Conductivity

DB/1300 F04 6-1990 Guidelines for Water Balance Test in Thermal Power Plants
DB13/T 58-1991 Guidelines for Water Balance Test in Thermal Power Plants

RO-ASRO, How to Test for Conductivity

STAS SR 11388-2000 Common test methods for electric cables and conductors
STAS 6693/2-1975 Semiconductor devices TRANSISTORS Methods for measuring electrical properties

Institute of Interconnecting and Packaging Electronic Circuits (IPC), How to Test for Conductivity

IPC TM-650 2.6.25-2003 Conductive Anodic Filament (CAF) Resistance Test: X-Y Axis
IPC 9691-2005 User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)
IPC 9691A-2007 User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)

国家市场监督管理总局、中国国家标准化管理委员会, How to Test for Conductivity

GB/T 1550-2018 Test methods for conductivity type of extrinsic semiconducting materials
GB/T 12966-2022 The methods for determining aluminium and aluminium alloys conductivity using eddy current
GB/T 40284-2021 Guide for energy saving test of waste heat recovery system in power plant

Danish Standards Foundation, How to Test for Conductivity

DS/EN 61395:1998 Overhead electrical conductors. Creep test procedures for stranded conductors
DS/EN 62415:2010 Semiconductor devices - Constant current electromigration test
DS/EN ISO 284:2013 Conveyor belts - Electrical conductivity - Specification and test method
DS/EN ISO 14272:2002 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds
DS/EN 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
DS/EN 61000-4-20:2011 Electromagnetic compatibility (EMC) – Part 4-20: Testing and measurement techniques – Emission and immunity testing in transverse electromagnetic (TEM) waveguides
DS/EN 50702:2021 Railway applications – Rolling stock – Conductor rail current collectors (shoegear): Characteristics and tests
DS/EN ISO 14273:2002 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to Test for Conductivity

GB/T 12631-2017 Test method for resistance of conductors of printed boards
GB/T 33655-2017 Superconducting power devices—General requirements for characteristic tests of current leads designed for powering superconducting devices
GB/T 35006-2018 Semiconductor integrated circuits—Measuring method of level converter
GB/T 35007-2018 Semiconductor integrated circuits—Measuring method of low voltage differential signaling circuitry
GB/T 14028-2018 Semiconductor integrated circuits—Measuring method of analogue switch
GB/T 34657.1-2017 Interoperability test specifications of electric vehicle conductive charging—Part 1: Supply equipment
GB/T 34657.2-2017 Interoperability test specifications of electric vehicle conductive charging—Part 2：Vehicle

Guangdong Provincial Standard of the People's Republic of China, How to Test for Conductivity

DB4401/T 116-2021 Guidelines for Energy Efficiency Testing of Electric Heating Boilers

AT-ON, How to Test for Conductivity

ONORM C 9430-1982 Testing of Elastomers;Directives for the preparation of test samples for testing of elastomers and tissues covered with elastomers
ONORM EN 20284-1993 Conveyor belts — Electrical conductivity — Specification and method of test (ISO 284:1982)
ONORM E 3510 Teil.3-1989 Concepts for cables, flexible cords and insulated wires; types of testing, samples and values; terms and definitions

Professional Standard - Electron, How to Test for Conductivity

SJ/Z 9010.12-1987 Measurements of electrical properties of electronic tubes and valves--Part 12: Methods of measuring for electrode resistance, transcondductance, amplification factor, conversion resistance and conversion transconductance
SJ/T 2215-2015 Measuring methods for semiconductor photocouplers
SJ 2857.2-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurements of conductivity
SJ 2355.4-1983 Methods of measurement for junction capacitance of light-emitting devices
SJ/T 11386-2008 General specification of earth coninuity tester
SJ/T 11098-1996 Test method for standing wave coefficient of marine navigation radar waveguide feed system
SJ 2355.3-1983 Method of measurement for reverse current of light-emitting devices
SJ 1388-1978 Methods of measurement for anode conductance of noise-generator diodes
SJ/Z 9010.3-1987 Measurements of electrical properties of electronic tubes and valves--Part 3: Measurement of equivalent input and output admittances
SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity
SJ 2658.4-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for capacitance
SJ/T 2214-2015 Measuring methods for semiconductor photodiode and phototransistor
SJ 2658.3-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for backward voltage
SJ/T 10735-1996 Semiconductor integrated circuits General principles of measuring methods for TTL circuits
SJ/T 10736-1996 Semiconductor integrated circuits - General principles of measuring methods for HTL circuits
SJ/T 10737-1996 Semiconductor integrated circuits - General principles of measuring methods for ECL circuits
SJ/T 10741-2000 Semiconductor integrated circuits General principles of measuring methods for CMOS circuits
SJ/T 10741-1996 Semiconductor integrated circuits--General principles of measuring methods for CMOS circuits
SJ/T 10482-1994 Test method for characterizing semiconductor deep levels by transient capacitance techniques
SJ 2214.3-1982 Method of measurement for dark current of semiconductor photodiodes
SJ 2214.5-1982 Method of measurement for junction capacitance of semiconductor photodiodes
SJ 2214.8-1982 Method of measurement for dark current voltage of semiconductor phototransistors
SJ 2214.10-1982 Method of measurement for light current of semiconductor photodiodes and phototransistors
SJ 2658.5-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for forward series resistance
SJ/T 10804-2000 Semiconductor integrated circuits.General principles of measuring methods for level translator
SJ/T 10805-2000 Semiconductor integrated circuits.General principles of measuring methods for voltage comparators
SJ/T 10803-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for line circuits
SJ 2215.6-1982 Method of measurement for junction capacitance of semiconductor photocouplers (diodes)
SJ/T 11005-1996 Semiconductor TV integrated circuits - General principles of measuring methods for audio channel circuits
SJ/T 11006-1996 Semiconductor TV integrated circuits - General principles of measuring methods for horizontal and vertical sweep circuits
SJ/T 11004-1996 Semiconductor TV integrated circuits - General principles of measuring methods for picture channel circuits
SJ/Z 9011.3-1987 Measurement of photosensitive components Part 3 Methods of measurement for photoconductive cells for visible spectra
SJ 2215.3-1982 Method of measurement for forward current of semiconductor photocouplers (diodes)
SJ 2214.4-1982 Method of measurement for reverse break-down voltage of semiconductor photodiodes
SJ 2215.4-1982 Method of measurement for reverse current of semiconductor photocouplers (diodes)
SJ 2215.10-1982 Method of measurement for direct current transfer ratio of semiconductor photocouplers
SJ 2215.12-1982 Method of measurement for input-to-output capacitance of semiconductor photocouplers
SJ 2215.13-1982 Method of measurement for input-to-output isolation resistance of semiconductor photocouplers

BR-ABNT, How to Test for Conductivity

ABNT NBR 9150-2013 Wire and cables for telecommunication — Separation of insulated conductors — Test method

工业和信息化部, How to Test for Conductivity

SJ/T 11792-2022 Test method for conductivity of lithium-ion battery electrode materials
SJ/T 10805-2018 Semiconductor integrated circuit voltage comparator test method
SJ/T 11702-2018 Semiconductor integrated circuit serial peripheral interface test method

Professional Standard - Non-ferrous Metal, How to Test for Conductivity

YS/T 63-1993 Roasting method for test sample of carbon paste for aluminum electrolysis

(U.S.) Ford Automotive Standards, How to Test for Conductivity

FORD FLTM BI 128-1-2001 ELECTROSTATIC CONDUCTIVITY TEST FOR PLASTIC PARTS

CENELEC - European Committee for Electrotechnical Standardization, How to Test for Conductivity

EN 62415:2010 Semiconductor devices - Constant current electromigration test

Professional Standard - Aviation, How to Test for Conductivity

HB 5356-1986 Eddy current test method for electrical conductivity of aluminum alloy

Professional Standard - Energy, How to Test for Conductivity

NB/T 11072-2023 Guidelines for the application of test voltage measurement systems
NB/T 10827-2021
NB/T10827-2021

ES-UNE, How to Test for Conductivity

UNE-EN 62415:2010 Semiconductor devices - Constant current electromigration test (Endorsed by AENOR in September of 2010.)
UNE-EN ISO 284:2012 Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012) (Endorsed by AENOR in February of 2013.)
UNE-EN 17294:2020 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
UNE-EN ISO 14273:2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds (ISO 14273:2016)
UNE-EN ISO 14272:2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds (ISO 14272:2016, Corrected version 2016-09-01)
UNE-EN 62047-22:2014 Semiconductor devices - Micro-electromechanical devices - Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates (Endorsed by AENOR in November of 2014.)
UNE-EN 50702:2021 Railway applications - Rolling stock - Conductor rail current collectors (shoegear): Characteristics and tests
UNE-EN 4158:2006 Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers (Endorsed by AENOR in March of 2007.)
UNE-EN 61000-4-31:2017 Electromagnetic Compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test (Endorsed by Asociación Española de Normalización in April of 2017.)
UNE-EN 61788-14:2010 Superconductivity -- Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices (Endorsed by AENOR in November of 2010.)
UNE-EN ISO 14270:2016 Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016)
UNE-EN IEC 61000-4-20:2022 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
UNE-EN 3475-505:2023 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands (Endorsed by Asociación Española de Normalización in April of 2023.)

NZ-SNZ, How to Test for Conductivity

AS/NZS 1660.5.5:2005 Test Methods for Electric Cables, Cords and Conductors Method 5.5: Fire Tests - Circuit integrity
AS/NZS 1660.1:1998 Test Methods for Electric Cables, Cords and Conductors Method 1: Conductors and Metallic Components
AS/NZS 1660.5.6:2005 Test Methods for Electric Cables, Cords and Conductors Method 5.6: Fire Tests - Test for vertical flame propagation for a single insulated wire or cable
AS/NZS 1660.5.4:1998 Test Methods for Electric Cables, Cords and Conductors Method 5.4: Fire Tests - Determination of Degree of Acidity of Gases Evolved During the Combustion of Materials Taken from Electric Cables by Measuring pH and Conductivity

Taiwan Provincial Standard of the People's Republic of China, How to Test for Conductivity

CNS 7367-1981 Method of Test for D.C. Resistance or Conductance of Insulating Materials
CNS 7631-1981 Method of Test for Surface Insulation Resistivity of Multi-Strip Specimens
CNS 6802-1980 Standard Test Procedured for Noise Margin Measurements for Semiconductor Logic Gating Microcircuits

ZA-SANS, How to Test for Conductivity

SANS 6282-1:2007 Test methods for bare conductors and conductors of insulated electric cables Part 1: Conductor resistance
SANS 6282-3:2007 Test methods for bare conductors and conductors of insulated electric cables Part 3: Mechanical tests
SANS 6281-1:2007 Test methods for impregnated paper-insulated electric cables Part 1: Tests on insulating and semi-conducting paper

TR-TSE, How to Test for Conductivity

TS 2643-1977 Test Procedures For Bemiconductor Detectors For Ionizing Radiation
TS 2452-1976 MEASUBEMENTS OF THE ELECTRICAL PROPERTIES OF EIJECTRONIC TUBES AND VALVES PART 12 : METHODS OF MEASURING ELECTRODE RESISTANCE, TRANSCONDUCTANE, AMPLIFICATION FACTOR, CONVERSION RESISTANCE AND CONVERSION TRANSCONDUCTANCE
TS 2683-1977 Methods Of Test For General Purpose Electrical Cables With Copper Conductors For lircraft
TS 2443-1976 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 3 : MEASUREMENT OF EQUIVALENT INPUT AND OUTPUT ADMITTANCES
TS 2586-1977 METHODS OF TEST FOR HEAT - RESISTING (190°C) ELEKCTRICAL CABLES WITH COPPER CONDUCTORS FOR AIRCRAFT

Electronic Components, Assemblies and Materials Association, How to Test for Conductivity

ECA 186-E-1978 Passive Electronic Component Parts, Test Methods for; General Instructions and Index of Tests

Professional Standard - Electricity, How to Test for Conductivity

DL/T 1095-2008 Guide to on-site determination of electrostatic charging tendency of transformer oil
DL/T 2231-2021 Guidelines for frequency-domain dielectric spectrum testing of oil-paper insulated power equipment
DL/T 1323-2014 Guide for measurement of wide-frequency AC voltage withstand test on site
DL/T 520-1993 Technical Guidelines for Incoming Coal Testing Laboratory of Thermal Power Plants
DL/T 1566-2016 Guide for measurement of DC transmission line and earth electrode line parameters

ET-QSAE, How to Test for Conductivity

ES 491-2000

AENOR, How to Test for Conductivity

UNE 22315:1985 VENTILATION DUCTS. ELECTRIC CONDUCTIVITY. TESTING METHOD. SPECIFICATIONS.
UNE 18155:1981 ANTISTATIC ENDLESS V-BELTS - ELECTRICAL CONDUCTIVITY - CHARACTERISTICS AND METHOD OF TEST.
UNE-EN 61395:1999 OVERHEAD ELECTRICAL CONDUCTORS. CREEP TEST PROCEDURES FOR STRANDED CONDUCTORS.
UNE 22070:1992 COMPRESSED AIR HOSES. ELECTRIC CONDUCTIVITY. TESTING METHOD AND SPECIFICATIONS.
UNE-EN 61620:1999 INSULATING LIQUIDS. DETERMINATION OF THE DIELECTRIC DISSIPATION FACTORBY MEASUREMENT FO THE CONDUCTANCE AND CAPACITANCE. TEST METHOD

未注明发布机构, How to Test for Conductivity

DIN EN ISO 284:2004 Conveyor Belts – Electrical Conductivity – Specification and Test Methods

Association of German Mechanical Engineers, How to Test for Conductivity

DVS 2216-1 Beiblatt 1-2005 DVS test specimens with an energy director for the ultrasonic welding of thermoplastics and testing conditions

SE-SIS, How to Test for Conductivity

SIS SS IEC 700:1984 Power electronics — Semiconductor valves for high-voltage d.c. power transmission — Testing
SIS SS IEC 333:1986 Nuclear instrumentation - Testprocedures for semiconductor chargedparticle detectors
SIS SS 06 17 10-1984 Welding electrodes - Test specimen for determination of weld metal composition

Indonesia Standards, How to Test for Conductivity

SNI 06-6989.1-2004 Water and waste water - Part 1: Test methods of electrical conductivity

United States Navy, How to Test for Conductivity

NAVY MIL-T-81290 NOTICE 1-1995 TEST SET, MISSILE ELECTRICAL SYSTEM MARK 363 MOD 3
NAVY MIL-T-81290-1965 TEST SET, MISSILE ELECTRICAL SYSTEM MARK 363 MOD 3
NAVY MIL-STD-287 A NOTICE 2-1997 TEST SIGNALS FOR ELECTRONIC TACTICAL AIR NAVIGATION EQUIPMENT (TACAN)
NAVY MIL-STD-287 A VALID NOTICE 1-1991 TEST SIGNALS FOR ELECTRONIC TACTICAL AIR NAVIGATION EQUIPMENT (TACAN)
NAVY MIL-STD-287 A-1958 TEST SIGNALS FOR ELECTRONIC TACTICAL AIR NAVIGATION EQUIPMENT (TACAN)
NAVY MIL-T-81404 B NOTICE 1-1996 TEST SET, ELECTRICAL CIRCUIT, GUIDED MISSILE LAUNCHER AND AIRCRAFT, AN/ASM-149C
NAVY MIL-T-81404 B (1)-1985 TEST SET, ELECTRICAL CIRCUIT, GUIDED MISSILE LAUNCHER AND AIRCRAFT, AN/ASM-149C
NAVY MIL-T-81404 B-1985 TEST SET, ELECTRICAL CIRCUIT, GUIDED MISSILE LAUNCHER AND AIRCRAFT, AN/ASM-149C

Military Standard of the People's Republic of China-General Armament Department, How to Test for Conductivity

GJB 6919-2009 Test and evaluation methods of conductorial-fibre performance
GJB 8681-2015 Calibration procedures for conductivity and volume resistance testers of solid explosives
GJB 8696.7-2015 Terminal guided projectile test method Part 7: Circuit resistance detection
GJB 1047.2-1990 Test Methods for Black Powder - Determination of Potassium Nitrate Conductivity Method
GJB 9147-2017 Semiconductor integrated circuit operational amplifier test methods
GJB 8701.7-2015 Anti-tank missile test methods Part 7: Circuit resistance (electrical parameters) detection

GOSTR, How to Test for Conductivity

GOST 33461-2015 Aviation and distillate fuels. Test methods for electrical conductivity
GOST IEC 61000-4-31-2019 Electromagnetic compatibility (EMC). Part 4-31. Testing and measurement techniques. AC mains ports broadband conducted disturbance immunity test

Anhui Provincial Standard of the People's Republic of China, How to Test for Conductivity

DB34/T 3571-2019 Electrical test method for insulating layer of large superconducting magnet
DB34/T 3770-2020 Test method for electrical testing of composite insulators for use in superconducting magnet systems
DB34/T 3424-2019 Superconducting cyclotron electrostatic deflection plate test technical requirements
DB34/T 3240-2018 Testing method of voltage distribution in superconducting cyclotron resonator cavity

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., How to Test for Conductivity

IEEE 300-1988 Standard Test Procedures for Semiconductor Charged-Particle Detectors
IEEE 300-1982 STANDARD TEST PROCEDURES FOR SEMICONDUCTOR CHARGED-PARTICLE DETECTORS
IEEE 82 ERTA-2009 Errata to IEEE Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors

Professional Standard - Ferrous Metallurgy, How to Test for Conductivity

YB/T 4148-2006 Methods of measurement of the magnetic properties of electrical steel sheet and strip with a single small sheet sample

American National Standards Institute （ANSI), How to Test for Conductivity

ANSI/ASTM B63:2001 Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
ANSI/IEEE 300:1988 Test Procedures for Semiconductor Charged-Particle Detectors
ANSI/ASTM D257:2014 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ANSI/ASTM D4308:2013 Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ANSI/ASTM D4308:2021 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
ANSI/ASTM A804/A 804M:1999 Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
ANSI/ASTM A932:2001 Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
ANSI/ASTM D2624:2021 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, How to Test for Conductivity

GJB 5389.10-2005 Test method of gun-launched missile Part 10:Circuit resistance inspection
GJB 5491.7-2005 Test method of terminally guided projectile Part 7:Circuit resistance detection test and measurement
GJB 5895.7-2006 Test method for anti-tank missile Part 7: Circuit resistance (electric parameters) inspection
GJB 5389.12-2005 Test method of gun-launched missile Part 12:Electrostatic parameters inspection

GM North America, How to Test for Conductivity

GM GMP.PE.021-2003 Polyethylene (PE) High Density, Conductive, Blow Moldable, ASTM Tests

Lithuanian Standards Office , How to Test for Conductivity

LST EN 62415-2010 Semiconductor devices - Constant current electromigration test (IEC 62415:2010)
LST EN ISO 284:2013 Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2012)
LST EN 61395-2001 Overhead electrical conductors. Creep test procedures for stranded conductors (IEC 61395:1998)
LST EN 50702-2021 Railway applications - Rolling stock - Conductor rail current collectors (shoegear): Characteristics and tests
LST EN 61620-2001 Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method (IEC 61620:1998)

Society of Automotive Engineers (SAE), How to Test for Conductivity

SAE ARP5724-2013 Aerospace - Testing of Electromechanical Actuators, General Guidelines For

CEN - European Committee for Standardization, How to Test for Conductivity

PREN 17294-2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)

PT-IPQ, How to Test for Conductivity

NP 2849-1985

国家能源局, How to Test for Conductivity

NB/T 25083-2018 Technical Guidelines for Basic Vibration Isolation Testing of Nuclear Power Plant Turbine Generator Units
NB/T 42080-2016 Test method for ion conductive membranes for all-vanadium redox flow batteries

Professional Standard - Machinery, How to Test for Conductivity

JB/T 6307.1-1992 Test method for power semiconductor module Rectifier diode pair of arms
JB/T 6307.2-1992 Test method for power semiconductor module Single-phase bridge rectifier diodes
JB/T 6307.3-1992 Test method for power semiconductor module Triphase bridge rectifier diode
JB/T 4219-1999 Type designation of measuring equipments for power semiconductor devices

International Electrotechnical Commission (IEC), How to Test for Conductivity

IEC 62899-202-5:2018 Printed electronics - Part 202-5: Materials - Conductive ink - Mechanical bending test of a printed conductive layer on an insulating substrate
IEC 60333:1993 Nuclear instrumentation; semiconductor charged-particle detectors; test procedures
IEC 61000-4-31:2016 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test

International Organization for Standardization (ISO), How to Test for Conductivity

ISO/TR 6307:2023 Effect of conductivity on multipass testing as per ISO 4548-12:2017
ISO/DTR 6307 Effect of conductivity on multipass testing as per ISO 4548-12:2017

VE-FONDONORMA, How to Test for Conductivity

European Committee for Electrotechnical Standardization（CENELEC）, How to Test for Conductivity

EN 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
EN IEC 61000-4-20:2022 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
EN 61000-4-31:2017 Electromagnetic compatibility (EMC) - Part 4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance immunity test

BE-NBN, How to Test for Conductivity

NBN I-983-1969

ECIA - Electronic Components Industry Association, How to Test for Conductivity

251-A-1970 Test to Determine the Temperature Rise as a Function of Current in Printed Conductors
EIA/ECA-364-54A-1999 TP-54A Magnetic Permeability Test Procedure for Electrical Connectors@ Contacts@ and Sockets
364-47-1988 TP-47 Conductor Unwrap Test Procedure for Solderless Wrapped Electrical Connectors

Electronic Components, Assemblies and Materials Association, How to Test for Conductivity

EIA_ECA-364-54A-1999 TP-54A Magnetic Permeability Test Procedure for Electrical Connectors, Contacts, and Sockets