ZH
RU
ES

Electrophoretic method validation

Electrophoretic method validation, Total:499 items.

In the international standard classification, Electrophoretic method validation involves: Medical sciences and health care facilities in general, Paints and varnishes, Surface treatment and coating, Sports equipment and facilities, Biology. Botany. Zoology, Domestic, commercial and industrial heating appliances, Protection against fire, Installations in buildings, On-board equipment and instruments, Microbiology, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Horology, Company organization and management, Measurement of fluid flow, Environmental protection, Components and accessories for telecommunications equipment, Electronic components in general, Aircraft and space vehicles in general, Linear and angular measurements, Audio, video and audiovisual engineering, Industrial automation systems, Applications of information technology, Measurement of volume, mass, density, viscosity, Fibre optic communications, Equipment for the chemical industry, Water quality, General methods of tests and analysis for food products, Pharmaceutics, Electrical accessories, Thermodynamics and temperature measurements, Analytical chemistry, Quality, Nuclear energy engineering, Welding, brazing and soldering, Non-destructive testing, Testing of metals, Meat, meat products and other animal produce, Protection against crime, Capacitors, Vocabularies, Electric road vehicles, Cereals, pulses and derived products, Shipbuilding and marine structures in general, Packaging and distribution of goods in general, Medical equipment, Rotating machinery, Fluid storage devices, Tyres, Optics and optical measurements, Protective equipment, Electronic tubes, Animal feeding stuffs, Fasteners, Construction materials, Ventilators. Fans. Air-conditioners, Aerospace electric equipment and systems, Products of the chemical industry, Data storage devices, Sterilization and disinfection, AGRICULTURE, Tobacco, tobacco products and related equipment, Raw materials for rubber and plastics, Acoustics and acoustic measurements, Transport.

Korean Agency for Technology and Standards (KATS), Electrophoretic method validation

KS P 1011-2008 Test method of the 2-D electrophoresis for recombinant bacteria
KS P 1011-2019 Test method of the 2-D electrophoresis for recombinant bacteria
KS G 5821-5-2005 Swimming pool equipment－Part 5：Additional specific safety requirements and test methods for lane lines
KS G 5821-3-2015(2020) Swimming pool equipment－Part 3：Additional specific safety requirements and test methods for pool fittings for water treatment purposes
KS G 5821-1-2005 Swimming pool equipment-Part 1:General safety requirements and test methods
KS I ISO TR 13843-2007(2012) Water quality－Guidance on validation of microbiological methods
KS B ISO 3453-2006(2011) Non－destructive testing－Liquid penetrant inspection－Means of verification
KS G 5821-6-2005 Swimming pool equipment-Part 6:Additional specific safety requirements and test methods for lane lines
KS G 5821-11-2005 Swimming pool equipment-Part 11:Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
KS G 5821-4-2005 Swimming pool equipment-Part 4:Additional specific safety requirements and test methods for starting platforms
KS M ISO 10231:2021 Motorcycle tyres — Test methods for verifying tyre capabilties
KS M ISO 10231:2010 Motorcycle tyres－Test methods for verifying tyre capabilities
KS M ISO 10191-2012(2022) Passenger car tyres－Verifying tyre capabilities－Laboratory test methods
KS G 5821-7-2005 Swimming pool equipment-Part 7:Additional specificsafety requirements and test methods for water polo goals
KS G 5821-8-2005 Swimming pool equipment－Part 8：Additional specific safety requirements and test methods for leisure water features
KS G 5821-5-2005(2020) Swimming pool equipment－Part 5：Additional specific safety requirements and test methods for lane lines
KS G 5821-6-2005(2020) Swimming pool equipment－Part 6：Additional specific safety requirements and test methods for lane lines

Professional Standard - Chemical Industry, Electrophoretic method validation

HG/T 3334-2012 General test methods for cataphoretic coatings

American Society for Testing and Materials (ASTM), Electrophoretic method validation

ASTM D4584-86(1999) Standard Test Method for Measuring Apparent pH of Electrocoat Baths
ASTM D4584-05(2022) Standard Test Method for Measuring Apparent pH of Electrocoat Baths
ASTM D4370-01(2017) Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
ASTM D4584-05(2015) Standard Test Method for Measuring Apparent pH of Electrocoat Baths
ASTM E1470-92(2006) Standard Test Method for Characterization of Proteins by Electrophoretic Mobility
ASTM E1470-92(1998) Standard Test Method for Characterization of Proteins by Electrophoretic Mobility
ASTM D4399-05 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D4399-05(2023) Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths
ASTM D5145-03 Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
ASTM D5145-09 Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
ASTM E4-79 Standard Methods of Load Verification Of Testing Machines
ASTM D4370-01(2023) Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath
ASTM D6508-10 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
ASTM D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development
ASTM E77-98(2003) Standard Test Method for Inspection and Verification of Thermometers
ASTM E77-98 Standard Test Method for Inspection and Verification of Thermometers
ASTM E77-14 Standard Test Method for Inspection and Verification of Thermometers
ASTM E2857-11(2021)e1 Standard Guide for Validating Analytical Methods
ASTM E2857-21 Standard Guide for Validating Analytical Methods
ASTM E2857-22 Standard Guide for Validating Analytical Methods
ASTM E2857-11(2016) Standard Guide for Validating Analytical Methods
ASTM E2857-11 Standard Guide for Validating Analytical Methods
ASTM D5145-90(1997) Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
ASTM D5145-09(2021) Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
ASTM F3263-17 Standard Guide for Packaging Test Method Validation
ASTM E77-14e1 Standard Test Method for Inspection and Verification of Thermometers
ASTM E77-14(2021) Standard Test Method for Inspection and Verification of Thermometers
ASTM D6508-15 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
ASTM F1062-97 Standard Test Method for Verification of Ski Binding Test Devices
ASTM D6508-00(2005)e1 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
ASTM D6508-00 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
ASTM D6508-00(2005)e2 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte
ASTM F1940-07a(2014) Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM E2918-18 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-18a Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-13 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-23 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E3116-18 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM D4821-14 Standard Guide for Carbon Blackmdash;Validation of Test Method Precision and Bias
ASTM F1062-97(2013) Standard Test Method for Verification of Ski Binding Test Devices
ASTM E126-13 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E2898-20 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications

CU-NC, Electrophoretic method validation

NC 90-14-01-1985 Metrologlcal Assurance. Working Resistcince Thermometers. Verificatlon Methods and Means
NC 90-15-26-1984 Metrological Assurance. lnductance Measures. Verificatlon Methods and Means
NC 90-13-30-1985 Metrological Assurance. Conductometers Verlfícation Methods and Means
NC 90-19-13-1985 Metrologial Assurance. lectrocardiographs. Verification ethods and Means
NC 90-08-07-1985 Metrological Assurance. Dynamometric Rings. Verification Methods and Means
NC 90-13-07-1984 Metrological Assurance. Photoelectric Coiorimeters. Verification Methods and Means
NC 90-08-10-1987 Metrological Assurance. Dynamometrie Wrenches. Verification Methods and Means
NC 90-14-29-1986 Metrological Assurance. Electronic Thermoregulators. Verification Methods and Means
NC 90-14-19-1984 Metrological Assurance. Photoelectric Pyrometers Verification Methods and Means
NC 90-08-04-1987 Metrological Assurance. Cable In-11. Tensiometers. Methods and Means of Verification
NC 90-11-13-1987 Metrological Assurance. Installations to Verify Clocks. Methods and Means of Verification
NC 90-19-03-1984 Metrological Assurance. Digital lectronic Frequencimeters erification Methods and Means
NC 90-14-32-1987 Metrological Assurance. Standard Platinum Resistance Thermometers. Methods and Means of Verification
NC 90-03-01-1986 Metrological Assurance Square and Bar Levels Verification Methods and Means
NC 90-04-20-1987 Metrological Assurance. Picnometers. Methods and Means of Verification
NC 90-14-08-1984 Metrological Assurance. Working Resistance Thermometers from 73, 15 up to 273, 15 K. Verification Methods and Means
NC 90-19-19-1987 Metrological Assurance, HighFrecuency Alternating Current Voltmeters. Methods and Means of Verification
NC 90-03-07-1987 Metrological Assurance. Micrometric Levels. Methods and Means of Verification
NC 90-14-26-1985 Metrological Assurance. Recording Manóme trie Thermometers with Electric Contact Devices, Verification Methods and Means
NC 90-14-27-1985 Metrological Assurance. MercuryFilled Glass Thermometers with Electrical Contact. Verification Methods and Means
NC 90-19-15-1987 Metrological Assurance. HighStability Standard Generators Verification Methods and Means
NC 90-14-31-1986 Metrological Assurance. Thorraographs. Verification Methods and Means
NC 90-15-34-1987 Metrological Assurance Phasemeters, Class 0.5 Methods and Means of Verification
NC 90-03-09-1987 Metrological Assurance. Geodesia Levels. Verification Methods and Means
NC 90-19-16-1987 Metrological Assurance. Impedance Meters. Methods and Means of Verification
NC 90-03-10-1987 Metrological Assurance. Level Testers. Methods and Means of Verification
NC 90-07-02-1984 Metrological Assurance. Manometers for Tyres. Verification Methods and Means
NC 90-13-32-1985 Metrological Assurance. Refractometers. Verifícation Methods and Means
NC 90-01-64-1988 Standards System for Metrological Assurance. Micators. Methods and Means of Verification
NC 90-13-14-1986 Metrological Assurance. pH Meters. Verification Methods and Means
NC 90-19-20-1987 Metrological Assurance. Impulse Voltmeters. Methods and Means of Verification
NC 90-13-37-1986 Metrological Assurance. Hair Hygrometer. Verification Methods and Means
NC 90-13-40-1987 Metrological Assurance. Polarimetric Quartz Plates. Methods and Means of Verifications
NC 90-19-18-1987 Metrological AssuranceQuality Gager. Methods and Means of Verification
NC 90-07-33-1987 Metrological Assurance. Aneroid Barometers. Methods and Means of Verification
NC 90-19-24-1988 Standards System for Metrological Assurance. Frecuency Deviation Meters. Methods and Means of Verification
NC 90-11-10-1985 Metrological Assurance. Maritime Chronometers. Verification Methods and Means
NC 90-15-35-1987 Metrological Assurance. 1. to 5. Class Working Voltmeters. Methods and Means of Verification
NC 90-04-15-1986 Metrologioal Assiirance. Glass-Capaclty Standard Measures. Verification Methods and Means
NC 90-11-11-1986 Metrological Assurance. Chess Mechanical Clock. Verification Means and Methods
NC 90-04-08-1984 Metrological Assurance Pipettes fop General Use. Verification Methods and Means
NC 90-11-12-1986 Metrological Assurance. Time Delay Measurement. Measurement Methods and Means
NC 90-14-18-1984 Metrological Assurance. Automatic Adjusten Balances. Verification Methods and Means
NC 90-19-21-1988 Standards System for Metrological Assurance. Low-Frequency Altern Current Millivoltimeters and Microamperimeters. Methods and Means of Verification
NC 54-391-1987 Construction Materials Concrete. Methods and Means of Verification
NC 90-18-05-1988 Standards System for Metrological Assurance. Impulse Counters. Methods and Means of Verification
NC 90-15-31-1984 Metrological Assurance. Digital Megaohmmeters and Teraohmmeters. Verification Methods and Means
NC 90-18-02-1988 Standards System for Metrological Assurance. Dosimetric Instruments with lonization Chamber for Measuring the Exposition and Power of Gamma Radiations. Methods and Means of Verification
NC 90-08-08-1986 Metrological Assurance. Sclerometer "SCHMIDT", Type N Verification Methods and Means
NC 90-06-37-1984 Metrological Assurance. BalanceBar and Sliding Block Scales Verification Methods and Means
NC 90-19-17-1987 Metrological Assurance. Low Frecuency Selective Microvoltrneters. Methods and Means of Verification
NC 90-15-36-1988 Standards System for Metrological Assurance. PE-11 Tester. Methods and Means of Verification
NC 90-16-02-1989 Standards System for Metrological Assurance. Wow,Flutter and Drift Meters. Methods and Means of Verification
NC 90-15-03-1985 Metrological Assurance. Voltmeters for Direct and Alternating Currents up to 100 Hz, Classes from 0,05 up to 0,5. Verification Methods and Means
NC 90-15-33-1987 Metrological Assurance. 1 to 5. Class Registering Amperimeters, Voltmeters, Wattmeters and Variometers. Verification Methods and Means
NC 90-13-36-1986 Metrological Assurance Conductometers. Testing Methods
NC 90-15-37-1988 Standards System for Metrological Assurance. 1. to 5. Class Measuring Clamps. Methods and Means of Verification
NC 90-05-07-1986 Metrological Assurance. Industrial Variable Area Flowmeter for Liquids. Verification Methods and Means
NC 90-07-10-1984 Metrological Assurance Diffentical Manometers with Pneumatic Output Signal Verification Method and Means
NC 90-14-35-1988 Standards System for Metrological Assurance. Metastatic Working-Thermometers. Methods and Means of Verification
NC 90-01-65-1989 Standards System for Metrological Assurance. Planoparallel Measures. Methods and Means of Verification

British Standards Institution (BSI), Electrophoretic method validation

BS EN 13451-5:2001 Swimming pool equipment - Additional specific safety requirements and test methods for lane lines
BS EN 13451-1:2020 Swimming pool equipment. General safety requirements and test methods for equipment installed in pools for public use
BS EN 16927:2017 Mini-pools. Specific requirements including safety and test methods for mini-pools
BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
BS EN ISO 16140-3:2021 Microbiology of the food chain. Method validation. Protocol for the verification of reference methods and validated alternative methods in a single laboratory
BS EN 13451-5:2014 Swimming pool equipment. Additional specific safety requirements and test methods for lane lines and dividing line
BS EN 16582-3:2015 Domestic swimming pools. Specific requirements including safety and test methods for aboveground pools
BS EN 16582-2:2015 Domestic swimming pools. Specific requirements including safety and test methods for inground pools
BS EN 13451-1:2011 Swimming pool equipment. General safety requirements and test methods
BS EN ISO 16140-2:2016 Microbiology of the food chain. Method validation. Protocol for the validation of alternative (proprietary) methods against a reference method
BS EN 13138-3:2003 Buoyant aids for swimming instruction - Part 3:Safety requirements and test methods for swim seats to be worn
BS EN 13138-3:2021 Buoyant aids for swimming instruction. Safety requirements and test methods for swim seats into which a user is positioned
BS EN ISO 16140-5:2020 Microbiology of the food chain. Method validation - Protocol for factorial interlaboratory validation for nonproprietary methods
BS EN ISO 16140-4:2020 Microbiology of the food chain. Method validation - Protocol for method validation in a single laboratory
BS EN 13451-4:2014 Swimming pool equipment. Additional specific safety requirements and test methods for starting platforms
BS EN 13451-4:2001 Swimming pool equipment - Additional specific safety requirements and test methods for starting platforms
BS IEC 62530-2:2021 SystemVerilog. Universal Verification Methodology Language Reference Manual
BS EN 13451-6:2001 Swimming pool equipment - Additional specific safety requirements and test methods for turning boards
BS EN 16582-1:2015 Domestic swimming pools. General requirements including safety and test methods
BS EN 13451-11:2014 Swimming pool equipment. Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
BS PD CEN/TS 17329-1:2021 Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods. Single-laboratory validation
23/30452546 DC BS EN ISO 16140-7. Microbiology of the food chain. Method validation - Part 7. Protocol for the validation of identification methods of microorganisms
BS EN 13451-7:2001 Swimming pool equipment - Additional specific safety requirements and test methods for water polo goals
BS EN 16713-1:2016 Domestic swimming pools. Water systems. Filtration systems. Requirements and test methods
BS EN 16713-2:2016 Domestic swimming pools. Water systems. Circulation systems. Requirements and test methods
BS ISO/IEC 7816-11:2022 Tracked Changes. Identification cards. Integrated circuit cards. Personal verification through biometric methods
BS EN 13451-11:2004 Swimming pool equipment - Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
BS PD CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods
BS PD CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods
BS EN 60793-1-30:2002 Optical fibres - Measurement methods and test procedures - Fibre proof test
BS EN 60793-1-30:2011 Optical fibres. Measurement methods and test procedures. Fibre proof test
BS ISO/IEC 10373-9:2011 Identification cards. Test methods. Optical memory cards. Holographic recording method
PD ISO/TS 22176:2020 Cosmetics. Analytical methods. Development of a global approach for validation of quantitative analytical methods
BS EN ISO 16140-1:2016 Microbiology of the food chain. Method validation. Vocabulary
PD ISO/TS 21913:2022 Temperature verification method applied to dynamic fatigue testing
BS EN ISO 16140-6:2019 Microbiology of the food chain. Method validation - Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures
PD 6528:1990 Method for verifying accuracy of tan delta measurements applicable to capacitors
BS PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
DD ENV 1292-1995 Identification card systems. Integrated circuit(s) cards and interface services. Additional test methods
PD CEN/TS 17455:2020 Animal feeding stuffs. Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
21/30395738 DC BS ISO/IEC 7816-11. Identification cards. Integrated circuit cards. Part 11. Personal verification through biometric methods
BS EN 13451-2:2015 Swimming pool equipment. Additional specific safety requirements and test methods for ladders, stepladders and handle bends
BS EN 13451-2:2001 Swimming pool equipment - Additional specific safety requirements and test methods for ladders, stepladders and handle bends
BS ISO 18527-3:2020 Eye and face protection for sports use. Requirements and test methods for eyewear intended to be used for surface swimming
BS EN 13451-2:2015+A1:2020 Swimming pool equipment. Additional specific safety requirements and test methods for ladders, stepladders and handle bends
BS ISO 26101:2012 Acoustics. Test methods for the qualification of free-field environments

CZ-CSN, Electrophoretic method validation

CSN 25 8313-1985 Thermocouples. Soconclary standards. Methods of verification
CSN 25 3308-1980 Block gauges. Methods of verification
CSN 35 6406-1984 Weston cells. Secondary voltage standards. Methods of verification
CSN 25 8307-1980 Industrial resistance temperature sensors. Methods of verification
CSN 25 8305-1980 Industrial thermocouple sensor clemont. Verification methods
CSN 25 7205-1981 Piston gauges. Method* of verification
CSN 25 7216-1984 Working pressure gauges. ethods of verification.
CSN 25 7206-1984 Recording pressure gauges. ethods of verification
CSN 25 6112-1986 Measuring device for length measuring of abric. Methods for verification
CSN 99 0378-1989 Length gauges for meter products. Methods of verification
CSN 99 4179-1990 Grain testers. Methods of verification and calibrating
CSN 25 6112-2004 Measuring device for lenght measuring of fabric - Methods for verification
CSN 25 7209-1986 Indicating and recording differential pres- ure gauges. Methods of verification
CSN 99 5461-1988 Electronic octave and onethird octave filters Methods of verification
CSN 25 7513-1984 Stationary measuring tanks. Technical requirements and verification methods
CSN 99 4442-1989 Indenters for hardness testing machines Methods of verification
CSN 99 2162-1990 Ammeters, voltmeters, wattmeters, varmeters. Methods of verification and testing
CSN 25 7217-1984 Pressure gauges with lelemeasuring evice. Methods of verification
CSN 25 2303-1987 Surface roughness. Calibration speciemens. Methods of verification

PL-PKN, Electrophoretic method validation

PN E04160 ArkusZ05-1973 Electric caibles Methods of testing Verification of the ?uality of the silvering
PN-EN ISO 16140-3-2021-07 E Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
PN-EN ISO 16140-4-2021-01 E Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
PN-EN ISO 16140-5-2021-01 E Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for nonproprietary methods (ISO 16140-5:2020)
PN-EN 13451-1-2021-05 E Swimming pool equipment -- Part 1: General safety requirements and test methods for equipment installed in pools for public use

Association Francaise de Normalisation, Electrophoretic method validation

NF P90-302:2002 Kit swimming - Safety requirements and test methods.
NF P90-303:2002 Small swimming pools - Safety requirements and test methods.
NF P90-316:2011 Domestic swimming pools for family use - Kit form swimming pools - General safety requirements and test methods.
NF ISO 12828-2:2020 Méthode de validation des analyses de gaz d'incendie - Partie 2 : validation intralaboratoire des méthodes de quantification
NF S52-388-1:2020 Swimming pool equipment - Part 1 : general safety requirements and test methods for equipment installed in pools for public use
NF EN ISO 16140-3:2021 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 3 : protocole pour la vérification dans un seul laboratoire de méthodes de référence et de méthodes alternatives validées
NF P90-317:2011 Domestic swimming pools for family use - Means of access - General safety requirements and test methods.
NF V08-103-5*NF EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 4 : protocol for method validation in a single laboratory
NF V08-103-4*NF EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4 : protocol for method validation in a single laboratory
NF X65-040-2*NF ISO 12828-2:2020 Validation method for fire gas analysis - Part 2 : Intralaboratory validation of quantification methods
NF EN ISO 16140-4:2020 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 4 : protocole pour la validation de méthodes dans un seul laboratoire
NF V08-103-3*NF EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3 : protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
NF EN ISO 16140-2:2016 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 2 : protocole pour la validation de méthodes alternatives (commerciales) par rapport à une méthode de référence
NF S52-388-5*NF EN 13451-5:2014 Swimming pool equipment - Part 5 : additional specific safety requirements and test methods for lane lines and dividing line
XP CEN/TS 16800:2021 Lignes directrices pour la validation des méthodes d'analyse physico-chimiques
NF V08-103-2*NF EN ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2 : protocol for the validation of alternative (proprietary) methods against a reference method
NF S52-010:2014 Public swimming pool - Computer vision systems for the detection of drowning accidents in swimming pools - Safety requirements and test methods
NF X45-306:2000 Filter cartridges - Test methods - Verification of the cleanliness.
NF S52-388-1:2011 Swimming pool equipment - Part 1 : general safety requirements and test methods.
XP T90-800*XP CEN/TS 16800:2021 Guideline for the validation of physico-chemical analytical methods
NF X45-308:2000 Filter cartridges - Test methods - Verification of resistance to high temperatures.
NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
NF ISO 9186-1:2014 Symboles graphiques - Méthodes d'essai - Partie 1 : méthodes de vérification de la compréhensibilité
XP CEN/TS 17329-1:2019 Denrées alimentaires - Lignes directrices générales pour la validation des méthodes de PCR qualitative en temps réel - Partie 1 : validation intralaboratoire
NF EN ISO 16140-6:2019 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 6 : protocole pour la validation de méthodes alternatives (commerciales) pour la confirmation microbiologique et le typage
XP V03-329-1*XP CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1 : single- laboratory validation
XP V18-801*XP CEN/TS 17455:2020 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
XP V18-800*XP CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
NF EN ISO 16140-5:2020 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 5 : protocole pour la validation interlaboratoires de méthodes non commerciales par plan factoriel
NF ISO 10191:2021 Pneumatiques pour voitures particulières - Vérification de l'aptitude des pneumatiques - Méthodes d'essai en laboratoire
XP ISO/TS 22176:2020 Cosmétiques - Méthodes analytiques - Développement d'une approche globale pour la validation des méthodes analytiques quantitatives
NF P90-303/A1:2003 Small swimming pools - Safety requirements and test methods - Requirements specific to the wood used for the manufacture of small swimming pools.
NF P90-306/A1:2005 Protective elements for in-ground, barrier-free, private of collective use swimming pools - Safety barriers and means of access to pool - Safety requirements and test methods.
NF V37-022:2013 Routine analytical cigarette-smoking machine - Additional test methods for machine verification
NF S93-100*NF EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods
NF X45-310:2000 Filter cartridges - Test methods - Verification of the crushing or bursting strength.
NF R12-755*NF ISO 10191:2021 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires

American National Standards Institute （ANSI), Electrophoretic method validation

ANSI/ASHRAE 146-2011 Methods of Testing and Rating Pool Heaters
ANSI/ASHRAE 190P-2013 Method of Testing for Rating Indoor Pool Dehumidifiers
ANSI/SCTE 34-2010 Test Method for Cored Depth Verification
ANSI/TIA/EIA 455-31C-1994 Proof Testing Optical Fibers by Tension
ANSI/EIA 364-1004:2010 TS-1004 Environmental Test Methodology for Verifying the Current Rating of Free-Standing Power Contacts or Electrical Connectors
ANSI/AMCA 230-2012 Laboratory Methods of Testing Air Circulating Fans for Rating and Certification

Professional Standard - Physical Culture, Electrophoretic method validation

TY/T 1003-2005 Technical requirements and test methods for swimming, diving, water polo and synchronised swimming establishments

European Committee for Standardization (CEN), Electrophoretic method validation

EN 13451-5:2001 Swimming Pool Equipment - Part 5: Additional Specific Safety Requirements and Test Methods for Lane Lines
EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
EN 13451-1:2001 Swimming Pool Equipment - Part 1: General Safety Requirements and Test Methods
EN 13451-1:2020 Swimming pool equipment - Part 1: General safety requirements and test methods for equipment installed in pools for public use
EN ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016)
EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
EN 13451-1:2011 Swimming pool equipment - Part 1: General safety requirements and test methods
EN 13451-11:2004 Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads
EN 13451-3:2001 Swimming Pool Equipment - Part 3: Additional Specific Safety Requirements and Test Methods for Pool Fittings for Water Treatment Purposes
PD CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods
PD CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods
PD CEN/TS 17329-1:2021 Tracked Changes. Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods. Single-laboratory validation
CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
EN ISO 16140-6:2019 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
EN 13451-1:2011+A1:2016 Swimming pool equipment - Part 1: General safety requirements and test methods
ENV EN ISO 13843:2001 Water Quality - Guidance on Validation of Microbiological Methods

Society of Automotive Engineers (SAE), Electrophoretic method validation

SAE AS4764-1995 Validation Methods for Mil-Std-1760 Aircraft Station Interfaces
SAE AS4270-1995 Validation Methods for Mil-Std-1760 Mission Stores
SAE AS4270-2012 Validation Methods for MIL-STD-1760 Mission Stores
SAE AS42701-2014 Validation Methods For MIL-STD-1760D Mission Stores
SAE AS4764-2012 Validation Methods for MIL-STD-1760 Aircraft Station Interfaces
SAE AS47642A-2012 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces
SAE AS47641-2012 Validation Methods for MIL-STD-1760B Aircraft Station Interfaces
SAE AS47642A-2007 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces

ES-UNE, Electrophoretic method validation

UNE 202009-25:2021 Methodology for periodic verification of electrical installations at homes.
UNE-EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
UNE-EN ISO 16140-4:2021 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
UNE-CEN GUIA 13:2010 IN Validation of environmental test methods
UNE-EN ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016)
UNE-EN ISO 16140-5:2021 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
UNE 80404:2018 Methods of testing cement. Validation of cement test methods.
UNE 202009-52:2021 Methodology for verification and inspection of low voltage electrical installations. Installations for the recharge of electric vehicles.
UNE 202009-28:2020 Methodology for verification and inspection of low voltage electrical installations at communal facilities.
UNE 202009-12:2020 Methodology for the verification and inspection of common low-voltage electrical installations in apartment buildings
UNE-CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods (Endorsed by Asociación Española de Normalización in February of 2021.)
UNE-CEN/TS 17329-1:2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation (Endorsed by Asociación Española de Normalización in August of 2021.)
UNE 202009-38:2020 Methodology for the verification and inspection of low voltage electrical installations in operating theatres and intervention rooms.
UNE-EN ISO 16140-6:2020 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
UNE 202009-27:2020 Methodology for verification and inspection of electrical installations in locations containing a bath or shower
UNE-CEN/TS 17455:2021 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins

International Organization for Standardization (ISO), Electrophoretic method validation

ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
ISO 16140-4:2020 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory
ISO/DIS 16140-7 Microbiology of the food chain — Method validation — Part 7: Protocol for the validation of identification methods of microorganisms
ISO 16140-4:2020/DAmd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Validation of a larger test portion size for qualitative methods
ISO 12828-2:2016 Validation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods
ISO 16140-4:2020/CD Amd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Annex H - Validation of larger test portion size for qualitative methods
ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method
ISO 16140-5:2020 Microbiology of the food chain — Method validation — Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods
ISO/TS 21913:2022 Temperature verification method applied to dynamic fatigue testing
ISO 16140-2:2016/CD Amd 1 Microbiology of the food chain — Method validation — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method — Amendment 1
ISO 10231:2003 Motorcycle tyres - Test methods for verifying tyre capabilities
ISO/TS 22176:2020 Cosmetics — Analytical methods — Development of a global approach for validation of quantitative analytical methods
ISO 20072:2009 Aerosol drug delivery device design verification - Requirements and test methods
ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 10191:2021 Passenger car tyres — Verifying tyre capabilities — Laboratory test methods
ISO 16140-6:2019 Microbiology of the food chain — Method validation — Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures
ISO 26101:2012 Acoustics - Test methods for the qualification of free-field environments
ISO 26101:2017 Acoustics - Test methods for the qualification of free-field environments

未注明发布机构, Electrophoretic method validation

NB/T 31053-2014 Wind turbine low voltage ride through modeling and verification method
WS/T 514-2017 Establishment and verification of detection capability for clinical laboratory measurement procedures

German Institute for Standardization, Electrophoretic method validation

DIN EN 13451-5:2001 Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines; German version EN 13451-5:2001
DIN EN ISO 16140-3:2021-06 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021); German version EN ISO 16140-3:2021
DIN EN ISO 16140-4:2020-12 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020); German version EN ISO 16140-4:2020
DIN EN 16927:2017 Mini pools - Specific requirements including safety and test methods for mini pools; German version EN 16927:2017
DIN EN 13451-1:2021 Swimming pool equipment - Part 1: General safety requirements and test methods for equipment installed in pools for public use; German version EN 13451-1:2020
DIN EN ISO 16140-2:2016-11 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016); German version EN ISO 16140-2:2016
DIN EN ISO 16140-5:2020-12 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020); German version EN ISO 16140-5:2020
DIN EN ISO 16140-3:2018 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference and validated alternative methods implemented in a single laboratory (ISO/DIS 16140-3:2017); German and English version prEN ISO 16140-3:2017
DIN EN ISO 16140-4/A1:2023-08 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory - AMENDMENT 1: Validation of a larger test portion size for qualitative methods (ISO 16140-4:2020/DAM 1:2023); German and English version...
DIN EN ISO 16140-2:2016 Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016)
DIN EN ISO 16140-7:2023-05 Microbiology of the food chain - Method validation - Part 7: Protocol for the validation of identification methods of microorganisms (ISO/DIS 16140-7:2023); German and English version prEN ISO 16140-7:2023 / Note: Date of issue 2023-04-21
DIN EN 13138-2:2008 Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held; English version of DIN EN 13138-2:2008-01
DIN CEN/TS 17329-1:2021-09 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation; German version CEN/TS 17329-1:2021
DIN CEN/TS 17174:2018-10*DIN SPEC 10796:2018-10 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals; German version CEN/TS 17174:2018
DIN CEN/TS 16800:2016-03*DIN SPEC 38402-61:2016-03 Guideline for the validation of physico-chemical analytical methods (CEN/TS 16800:2015); German version CEN/TS 16800:2015
DIN EN 13451-5:2014 Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines and dividing line; German version EN 13451-5:2014
DIN EN ISO 16140-6:2020-04 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019); German version EN ISO 16140-6:2019
DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020); German version EN ISO 16140-4:2020
DIN CEN/TS 17455:2020-07 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins; German version CEN/TS 17455:2020
DIN EN 13451-4:2001 Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms; German version EN 13451-4:2001

Professional Standard - Commodity Inspection, Electrophoretic method validation

SN/T 1405-2004 Inspection of 10-hydroxy-α-decenoic acid in bee products for import and export--Capillary electrophoresis method
SN/T 2497.21-2010 Test method of import and export dangerous chemicals-Part 21: Agarose gel electrophoresis
SN/T 2497.12-2010 Test method of import and export dangerous chemicals-Part 12: Single cell gel electrophoresis (SCGE) assay
SN/T 2497.14-2010 Test method of import and export dangerous chemicals-Part 14: Determination of sodium dodecyl sulfate polyacrylamide gel electropheresis
SN/T 3033-2011 Analysis of edible bird's nest product by molecular biological methods.Real-time PCR and 2DGE
SN/T 4001-2015 Protocol of verification for animal quarantine method standards
SN/T 2910.2-2011 Identification method of irradiated food for export.Part 2:Single cell gel electrophoresis
SN/T 3898-2014 Guidance on the validation and acceptance of cosmetics alternative testing methods in vitro

Hebei Provincial Standard of the People's Republic of China, Electrophoretic method validation

DB13/T 221-1994 Method for testing the purity of corn hybrids, inbred lines, and wheat seeds - protein electrophoresis

RU-GOST R, Electrophoretic method validation

GOST 8.216-2011 State system for ensuring the uniformity of measurements. Voltage transformers. Verification procedure
GOST 8.216-1988 State system for ensuring the uniformity of measurements. Voltage transformers. Verification methods
GOST 8.286-1978 State system for ensuring the uniformity of measurements. Electrical timemeters. Methods and means for verification
GOST R 57639-2017 Fire safety engineering. Validation and verification of calculation methods
GOST 8.320-1978 State system for ensuring the uniformity of measurements. Flowmeter electromagnetic industry. Methods and means for verification
GOST 12441-1966 Horisontal length comparators. Methods and means for verification
GOST R 8.683-2009 State system for ensuring the uniformity of measurements. Selective electronic voltmeters. Verification methods
GOST R 8.732-2011 State system for ensuring the uniformity of measurements. State verification schedule for means measuring inductance
GOST R 8.631-2007 State system for ensuring the uniformity of measurements. Scanning electron microscopes. Methods for verification
GOST R 8.687-2009 State system for ensuring the uniformity of measurements. D. C. measuring voltage dividers. Verification methods
GOST R 8.680-2009 State system for ensuring the uniformity of measurements. Volumetric glassware. Verification procedure
GOST R 8.709-2010 State system for ensuring the uniformity of measurements. The laboratory conductometers of liquid. Methods of verification
GOST 15982-1970 Levels with micrometrical feed of ampule. Methods and means of veritification
GOST R 8.624-2006 State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistance thermometers. Verification methods
GOST R 8.877-2014 The state system of measurement assurance. Measures of electromotive force (standard cells) and measures of direct electrical voltage. Methods of verification
GOST R 8.562-2007 State system for ensuring the uniformity of measurements. State verification schedule for means measuring the power and voltage of electromagnetic waves
GOST R 8.562-1996 State system for ensuring the uniformity of measurements. State verification schedule for means measuring power of electromagnetic waves within frequency range from 0,03 to 37,50 GHz
GOST 8.351-1979 State system for ensuring the uniformity of measurements. Slotted lines. Methods and means for verification
GOST R 8.708-2010 State system for ensuring the uniformity of measurements. Piezosorbtion hygrometers. Verification procedure
GOST 33984.3-2017 Lifts. Rules and method of examination (test) and measurement by certification of safety device of lifts. Rules of sampling
GOST 8.461-2009 State system for ensuring the uniformity of measurements. Platinum, copper and nickel resistive temperature transducers. Verification methods
GOST 8.461-1982 State system for ensuring the uniformity of measurements. Resistive temperature transducers. Methods and means of calibration
GOST 8.046-1985 State system for ensuring the uniformity of measurements. Optical dividing heads. Verification methods
GOST 8.252-1977 State system for ensuring the uniformity of measurements. Tachometric ball flowmeters. Methods and means for verification
GOST 8.366-1979 State system for ensuring the uniformity of measurements. Digital ohmmeters. Methods and means for verification
GOST R 8.789-2012 State system for ensuring the uniformity of measurements. The bomb calorimeters. The method of the verification
GOST 8.119-1985 State system for ensuring the uniformity of measurements. Selective electron voltmeters. Methods of verification
GOST 17639-1972 Kinescopes for black-and-white television receivers. Test method for guaranted operating time
GOST 8.261-1977 State system for ensuring the uniformity of measurements. Galvanometers. Methods and means of verification
GOST 30159-1994 Wood chemical products. Provision of accuracy for testing methods
GOST 24297-2013 Verification of purchased product. Organization and methods of control
GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison
GOST 8.311-1978 State system for ensuring the uniformity of measurements. Cathode-ray oscillographs. Methods and means for verification
GOST R 8.704-2010 State system for ensuring the uniformity of measurements. Working dilatometers. Verification procedure

Danish Standards Foundation, Electrophoretic method validation

DS/ISO 16140-3:2021 Microbiology of the food chain â€” Method validation â€” Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory
DS/EN ISO 16140-3:2021 Microbiology of the food chain – Method validation – Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
DS/ENV ISO/TR 13843:2001 Water quality - Guidance on validation of microbiological methods
DS/ISO/IEC 7816-11:2004 Identification cards - Integrated circuit cards - Part 11: Personal verification through biometric methods
DS/CEN/TS 16800:2021 Guideline for the validation of physico-chemical analytical methods
DS/EN 2591-B7:1994 Aerospace series-Elements of electrical and optical connection-Test methods-Part B7: Voltage proof test
DS/EN 13451-1:2020 Swimming pool equipment – Part 1: General safety requirements and test methods for equipment installed in pools for public use
DS/CEN/TS 17329-1:2021 Foodstuffs – General guidelines for the validation of qualitative real-time PCR methods – Part 1: Single-laboratory validation
DS/ISO/IEC 10373-2/Corr. 1:2010 Identification cards - Test methods - Part 2: Cards with magnetic stripes
DS/ISO/IEC 10373-2:2007 Identification cards - Test methods - Part 2: Cards with magnetic stripes
DS/EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods
DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons

Group Standards of the People's Republic of China, Electrophoretic method validation

T/HNCAA 027-2021 Verification of inspection and testing standard methods
T/CECPA 002-2020 Evaluation and Validation Method for Nuclear Power Design and Safety Analysis Software
T/ZMDS 10006-2019 Reliability Testing and Assessment for Medical Electron Linear Accelerator Part 2:Method of Reliability Index Verification for Power Supply of Electron Gun

Compressed Gas Association (U.S.), Electrophoretic method validation

CGA M-6-2013 Guideline for analytical method volidation

工业和信息化部, Electrophoretic method validation

JB/T 12992.2-2018 Measurement and Verification Methods for Energy Savings in Motor Systems Part 2: Measurement and Verification Methods for Energy Savings in Pump Systems
YD/T 3154-2016 Network electronic identity eID verification service interface testing method
JB/T 12992.1-2018 Measurement and verification method of energy saving of electric motor system Part 1: On-site energy efficiency test method of electric motor
YD/T 3782-2020 Mobile communication smart terminal vulnerability verification method

Professional Standard - Electricity, Electrophoretic method validation

DL/T 1593-2016 Reliability Verification Method of Electric Energy Information Collection Terminal

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electrophoretic method validation

GB/T 18204.9-2000 Methods of microbiological examination for water in swimming pool-Determination of aerobic bacterial count
GB/T 18204.10-2000 Methods of microbiological examination for water in swimming pool-Determination of Coliform bacteria
GB/T 15647-1995 Compliance test procedures for steady-state availability
GB/T 14127-1993 Bayeses method of reliability demonstration testing for black and white TV receivers
GB/T 9382-1988 Bayes method of reliability demonstration testing for colour broadcasting TV receiver
GB/T 22517.2-2008 Technical requirements and test methods for sports field.Part 2:Swimming
GB/T 30010-2013 Method for the verification of energy efficiency design index of ships
GB/T 29180.2-2012 The investigative methods and procedures for electrical fire.Part 2:Methods for dissolution and separation of physical evidence
GB/T 16840.5-2012 Technical determination methods for electrical fire evidence.Part 5:Method of recognizing and collecting the physical evidence of electrical fire

Professional Standard - Agriculture, Electrophoretic method validation

NY/T 449-2001 Identification purity of maize variety using salting in protein eletrohporesis
SN/T 5490-2023 Guidelines for Method Validation of Customs Technical Specifications
SN/T 3033-2018 Molecular Biological Identification Methods of Exported Bird's Nest Real-time Fluorescent PCR and Two-dimensional Electrophoresis

IN-BIS, Electrophoretic method validation

SAE - SAE International, Electrophoretic method validation

SAE AS6088-2019 Verification Methods for AS5653 Network Terminal
SAE AS6089-2017 Verification Methods for AS5653 Network Controller
SAE AS4270A-2017 Validation Methods for MIL-STD-1760 Mission Stores
SAE AS47642-2004 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces
SAE AS4764A-2017 Validation Methods for MIL-STD-1760 Aircraft Station Interfaces
SAE AS47643-2017 Verification Methods for MIL-STD-1760E Aircraft Station Interfaces
SAE AS47642B-2017 Validation Methods for MIL-STD-1760C Aircraft Station Interfaces
SAE AS47641A-2017 Validation Methods for MIL-STD-1760B Aircraft Station Interfaces

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Electrophoretic method validation

GJB 1209-1991 Test methods and procedures for microcircuit line certification

Professional Standard - Electron, Electrophoretic method validation

SJ/T 10386-1993 Compliance test method of reliability target for electronic industry special equipment
SJ/T 31107-1994 Requirements of readiness and methods of inspection and assessment for ZDS-1 electrophoresis apparatuses

AT-ON, Electrophoretic method validation

OENORM EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
OENORM EN ISO 16140-4:2021 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
OENORM EN ISO 16140-5:2021 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
ONR CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

CH-SNV, Electrophoretic method validation

SN EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
SN EN ISO 16140-4:2021 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
SN EN ISO 16140-5:2021 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)

Lithuanian Standards Office , Electrophoretic method validation

LST EN ISO 16140-3:2021 Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021)
LST EN ISO 16140-4:2020 Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory (ISO 16140-4:2020)
LST CEN/TS 16800-2021 Guideline for the validation of physico-chemical analytical methods
LST EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
LST CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

Standard Association of Australia （SAA）, Electrophoretic method validation

AS 16140.3:2022 Microbiology of the food chain — Method validation, Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021, MOD)

IX-SA, Electrophoretic method validation

American Society of Quality Control （ASQC), Electrophoretic method validation

ASQ D61070-1997 Compliance Test Procedures for Steady-State Availability (T82E)

Professional Standard - Public Safety Standards, Electrophoretic method validation

GA/T 1170-2014 Examination methods for evidence collection from mobile terminals
GA/T 1964-2021 Forensic Scientist Porcine STR Multiplex Amplification Assay Capillary Electrophoresis Fluorescence Detection
GA/T 1200-2014 Methods for examination of light distribution of evidence photography in forensic science
GA/T 1420-2017 Analysis of inorganic ions in explosive residues in Forensics.Capillary electrophoresis
GA/T 999-2012 Test method for verifying field performance of smoke management system.Hot smoke test
GA/T 1568-2019 Forensic Science Electronic Examination Terminology
GA/T 1569-2019 Specifications for the Construction of Forensic Science Electronic Evidence Testing Laboratory

司法部, Electrophoretic method validation

SF/T 0063-2020 General principles for validation of forensic toxicological analysis methods

Military Standard of the People's Republic of China-General Armament Department, Electrophoretic method validation

GJB 5309.10-2004 Test methods for pyrotechnics Part 10: Verification test for non-ignition of pyrotechnics
GJB 9339-2018 Accelerated life verification test method for spacecraft solar array drive mechanism
GJB 9916-2021 Aeroengine thermal barrier coating test verification method

ZA-SANS, Electrophoretic method validation

SANS 53138-3:2009 Buoyant aids for swimming instruction Part 3: Safety requirements and test methods for swim seats to be worn
SANS 53138-2:2007 Buoyant aids for swimming instruction Part 2: Safety requirements and test methods for buoyant aids to be held
SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons

AENOR, Electrophoretic method validation

UNE 40241-1:1973 METHOD OF DETERMINATION THE CONTENT IN CISTEMIC ACID OF WOOL HYDROLIZED BY MEANS OF ELECTROPHORESIS IN PAPER AND COLOURIMETRY.
UNE 40241-2:1975 PRECISIONS IN THE METHOD OF DETERMINING THE CONTENT IN CISTERNIC ACID OF HYDROLIZED OF WOOL BY MEANS OF ELECTROPHORESIS ON PAPER AND COLOURIMETRY.

GOSTR, Electrophoretic method validation

GOST 17215-1971 Micrometric hole gauges. Methods and means of verification
GOST R 58671-2019 Identification cards. Integrated circuit cards. Part 11. Personal verification through biometric methods
GOST R 8.684-2009 State system for ensuring the uniformity of measurements. Electronic analogue pulse voltmeters. Verifi cation methods

Indonesia Standards, Electrophoretic method validation

SNI ISO/TR 13843:2011 Water quality - Guidance on validation of microbiological methods

CEN - European Committee for Standardization, Electrophoretic method validation

ENV ISO 13843:2001 Water Quality - Guidance on Validation of Microbiological Methods
PD CEN/TS 17329-1:2019 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

国家市场监督管理总局, Electrophoretic method validation

RB/T 004-2019 Validation Guidelines for GMO Detection Methods
RB/T 033-2020 Guidelines for Validation and Validation of Microbiological Test Methods

Association of German Mechanical Engineers, Electrophoretic method validation

DVS 3210-1995

Professional Standard-Ships, Electrophoretic method validation

CB 20072-2012 Test method of sea trial for verifying torpedo guidance law

Liaoning Provincial Standard of the People's Republic of China, Electrophoretic method validation

DB21/T 1861.1-2010 Isoenzyme electrophoresis analysis method for water product germplasm inspection technical regulations
DB21/T 3156-2019 Specifications for third-party inspection and witness inspection of wire and cable products

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Electrophoretic method validation

ASHRAE SE-99-6-3-1999 Validation of Two French Building Energy Programs@ Part 2: Parameter Estimation Method Applied to Empirical Validation
ASHRAE SE-99-6-1-1999 Overview of Validation Methods for Energy and Environmental Software

Canadian Standards Association (CSA), Electrophoretic method validation

CAN/CSA-ISO/IEC 7816-11:2005 Identification cards - Integrated circuit cards - Part 11: Personal verification through biometric methods

ANSI - American National Standards Institute, Electrophoretic method validation

INCITS/ISO/IEC 7816-11:2004 Identification cards — Integrated circuit cards — Part 11: Personal verfication through biometric methods
INCITS/ISO/IEC 10373-2:1998 Identification cards - Test methods - Part 2: Cards with magnetic stripes

International Electrotechnical Commission (IEC), Electrophoretic method validation

IEC TR 60996:1989 Method for verifying accuracy of tan delta measurements applicable to capacitors

VN-TCVN, Electrophoretic method validation

TCVN 5728-1993 Measuring means of Vicker hardness.Verification schedules
TCVN 7532-2005 Passenger car tyres.Verifying tyre capabilities.Laboratory test methods
TCVN 4547-1994 Barges for oil produsts.Method and means of verification

IT-UNI, Electrophoretic method validation

UNI CEN/TS 16800-2021 Guideline for the validation of physico-chemical analytical methods
UNI CEN/TS 17329-1-2021 Foodstuffs - General guidelines for the validation of qualitative real-time PCR methods - Part 1: Single-laboratory validation

(U.S.) Telecommunications Industries Association , Electrophoretic method validation

TIA-455-31-C-1994 FOTP-31 Proof Testing Optical Fibers by Tension

Shanxi Provincial Standard of the People's Republic of China, Electrophoretic method validation

DB14/T 2798-2023 Specification for verification of chemical analysis methods in testing laboratories
DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy
DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography

应急管理部, Electrophoretic method validation

XF/T 999-2012 On-site verification method of smoke prevention and exhaust system performance hot smoke test method

AASHTO - American Association of State Highway and Transportation Officials, Electrophoretic method validation

T 67-2008 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
T 67-2005 Standard Method of Test for Standard Practices for Force Verification of Testing Machines
T 67-1985 Standard Method of Test for Standard Practices for Load Verification of Testing Machines

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Electrophoretic method validation

GB/T 34867.1-2017 Procedures for measurement and verification of motor-system energy-savings—Part 1: Test procedures on working site for energy efficiency of motor

IETF - Internet Engineering Task Force, Electrophoretic method validation

RFC 1961-1996 GSS-API Authentication Method for SOCKS Version 5

Japanese Industrial Standards Committee (JISC), Electrophoretic method validation

JIS B 7556:2003 Proving methods and procedures for gas flowmeters

KR-KS, Electrophoretic method validation

KS M ISO 10231-2021 Motorcycle tyres — Test methods for verifying tyre capabilties

Professional Standard - Post and Telecommunication, Electrophoretic method validation

YD/T 716-1994 Test method for screening (verification) of optical fiber strength Longitudinal tension winding method

BELST, Electrophoretic method validation

STB 8010-99 System for ensuring the uniformity of measurement of Belarus. Electrocardiographs. Methods of verification

U.S. Air Force, Electrophoretic method validation

AIR FORCE MIL-STD-1537 C-2002 ELECTRICAL CONDUCTIVITY TEST FOR VERIFICATION OF HEAT TREATMENT OF ALUMINUM ALLOYS EDDY CURRENT METHOD

Taiwan Provincial Standard of the People's Republic of China, Electrophoretic method validation

CNS 14271-1998 Method of qualification for nuclear safety grade stationary lead-acid batteries

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Electrophoretic method validation

REPORT SM.2056-2005 Airborne verification of antenna patterns of broadcasting stations

Shanghai Provincial Standard of the People's Republic of China, Electrophoretic method validation

DB31/T 764-2013 Validation test methods for content of solid waste in inorganic building materials

Professional Standard - Aerospace, Electrophoretic method validation

QJ 1512-1988 Reliability Verification Test Method for Silicon Low Power NPN Transistor
QJ 2497.1-1993 Acceptance method of wire and cable for aerospace - wire acceptance method
QJ 2497.2-1993 Acceptance method of wire and cable for aerospace - Cable acceptance method

NL-NEN, Electrophoretic method validation

NEN 3365-1969 Jerrycans of PE for gasoline, 5 I

American Society of Mechanical Engineers (ASME), Electrophoretic method validation

ASME STP-PT-022-2008 COMPARISON AND VALIDATION OF CREEP-BUCKLING ANALYSIS METHODS

国家食品药品监督管理局, Electrophoretic method validation

YY/T 1495-2016 Microbial verification method for cleaning and disinfection effectiveness

Shandong Provincial Standard of the People's Republic of China, Electrophoretic method validation

DB37/T 273-1999 Electrophoresis identification method for authenticity and variety purity of maize inbred lines and single-cross varieties

JP-JEM, Electrophoretic method validation

JEM 1495-2011 The safety and technical standard and validation method for small fuel cell systems built in apartments

ETSI - European Telecommunications Standards Institute, Electrophoretic method validation

TR 101 034-1997 Methods for Testing and Specification (MTS); Reports on Experiments in Validation Methodology; PISN Cordless Terminal Mobility Incoming Call Additional Network Feature (ANF-CTMI) (V1.1.1)
EG 201 015-2012 Methods for Testing and Specification (MTS); Standards engineering process; A Handbook of validation methods (V2.1.1)
EG 201 015-2011 Methods for Testing and Specification (MTS); Standards engineering process; A Handbook of validation methods (V2.1.1)

RO-ASRO, Electrophoretic method validation

STAS R 12500/1-1987 ULTRASONIC FLAW DETECTION Checking up methods of flaw detection equipments having in view aecepteuce

Professional Standard - Traffic, Electrophoretic method validation

JT/T 826-2012 Limits and verification methods of fuel consumption for commercial ships