ZH
RU
ES

Electromagnetic flowmeter quality requirements

Electromagnetic flowmeter quality requirements, Total:499 items.

In the international standard classification, Electromagnetic flowmeter quality requirements involves: Measurement of fluid flow, Environmental protection, Aerospace electric equipment and systems, Quality, Shipbuilding and marine structures in general, Nuclear energy engineering, Installations in buildings, Electrical engineering in general, Linear and angular measurements, Transport, Services, Equipment for petroleum and natural gas industries, Rotating machinery, Electrical accessories, Electricity. Magnetism. Electrical and magnetic measurements, Motor cycles and mopeds, Electromagnetic compatibility (EMC), Geology. Meteorology. Hydrology, Ventilators. Fans. Air-conditioners, Vocabularies, Welding, brazing and soldering, Acoustics and acoustic measurements, Metrology and measurement in general, Electromechanical components for electronic and telecommunications equipment, Medical equipment, Textile fibres, Information sciences. Publishing, Conducting materials, Sports equipment and facilities, Protection against crime, Electronic components in general, Equipment for entertainment, Audio, video and audiovisual engineering, Technical drawings, Materials for aerospace construction, IT terminal and other peripheral equipment, Telecommunication terminal equipment, Coals, Freight distribution of goods, Electrical and electronic testing, Industrial automation systems, Space systems and operations, Kitchen equipment, Radiocommunications, Cinematography, Measurement of force, weight and pressure, Air quality, Farming and forestry, Fluid power systems, Radiation protection, Galvanic cells and batteries, Electric road vehicles, Road vehicle systems.

RO-ASRO, Electromagnetic flowmeter quality requirements

STAS 11298-1980 ELECTROMAGNETIC FLOWMETERS General tehnical requirements for quality
STAS 11080-1978 DIRECT-CURRENT POTENTIO- METERS General technical requirements for quality
STAS 7208-1983 DRIV1NG ELECTROMAGNETS Special technical requiremcnts for quality
STAS 11396-1980 D. C. BRIDGES FOR MEASURING RESISTANCE General technical requirements for quality
STAS 12028-1981 DIRECT-CURRENT RESISTIVE VOLT General technical requirements for quality
STAS 12082-1982 LABORATORY A.C. RESISTORS General technical requirements for quality
STAS E 12704-1988 MAGNETIZ1 NO E QUIPMENT FOR MAGNETIC PARTICLE FLAW DETECTION General technical requirements for quality
STAS 9565-1974 RADIO SHIELDING CHOKECOILS General technical requirements for quality
STAS 12000-1981 DIRECT CURRENT MILL MOTORS General technical requirements for quality
STAS 8273/0-1979 BALLASTS FOR GAZ DISCHARGE LAMPS General technical requirements for quality
STAS 3034-1972 SRI.ENJUM RFCTIFIF.RS General teehnioal requiremenls for quality
STAS 7977-1982 PLAN WASHERS General requirements for quality
STAS 4620-1990 Preambulators. General technological requirements for quality
STAS 10200-1975 ALTERNATING CURRENT GENERATORS FOR MOTOR VEHICLES Generals technical requirements for quality
STAS 12365-1985 PERSONAL PHOTOGRAPHIC DOSEMETERS General technical requirements for quality
STAS 11671-1983 INTERNAL MICROMETERS Technical general requirementslor quality
STAS 4198-1979 ALTERNATING-CURRENT WATTHOUR AND VARHOUR METERS General teehnical requirements for quality
STAS 8669-1988 GARBURETER JETS General tehnical reguirements for quality
STAS 11243-1979 LABORATORY D. C. REZISTORS General technical requirements for quality
STAS 2425-1984 LEVER SWITCHES UP TO 660 V a.c. and 1 000 A Technical requirements for quality
STAS 12765-1989 Automation devices and meanq| ELECTROMAGNETIC VALVES General technical requirements for quality
STAS 12931-1990 Industrial-process measurement and control. Vortex generation flow-meters. General technical requirements
STAS 1564/1-1985 ALTERNATING CURRENT DISCONNECTORS FOR VOLTAGES ABOVE 1 KV General technical requirements for quality
STAS 9822/1-1992 Motorvehicles electrical equipments. Electromechanical peedometers. General technical requirements for quality
STAS 7352/1-1988 APPARATUS FOR BLOOD PRESSURE MEASUREMENT WITH MERCURY GAUGES General technical requirements for quality
STAS 10228-1984 SILICON RECTIFIER DIODES General tehnical requirements lor quality
STAS 10954-1977 SEMICONDUCTOR RECTIFIERS General technical requirements for quality
STAS 12100/7-1986 Equipaments for wellhcad CIIOKES Special technical requirements for quality
STAS 11672-1983 SCREW MICROMETERS Technical general requirements for quality
STAS 8420-1986 TECHNICAL THERMOMETRES WITH ELECTRIC REZISTANCE General technical requirements for quality
STAS 10877-1977 UNRECORDED MAGNETIC TAPES FOR INSTRUMENTATIONAPPLICATIONS Technical requirements for quality
STAS 10253-1988 AIRCRAFT Static invertors General technical requirements for quality
STAS 8935-1990 CURRENT-LIMITING HIGH VOLTAGE FUSES General technical requirements for quality
STAS 12756-1989 DIRECT CURRENT ELECTRICALENGINES FOR AIRCRAFT General technical requirements for quality
STAS 6391/1-1986 BUSHINGS FOR ALTERNAT1NG VOLTA GES ABOVE 1 kV General technical requirements for quality
STAS 7237-1982 LABORATOR Y DYNAMOMETERS CALIBRATION Technical requirements for quality
STAS 6526-1990 Differential pressure gauges with u shaped tube. General technical requirements for quality
STAS 808/1-1985 PRIMARY BATTER1ES General technical requirements for quality
STAS 8273/1-1979 Ballasts for gaz discharge lamps BALLASTS FOR LOW PRESSURE MERCURY LAMPS Special technical requirements for quality
STAS 8273/2-1979 Ballasts for gaz discharge lamps BALLASTS FOR HIGH PRESSURE MERCURY VAPOUR LAMPS Special technical requirements for quality
STAS 12542-1987 BALLASTS FOR HIGH PRESSURE MERCURY VAPOUR LAMPS General technical requirements for quality
STAS 12541-1987 BALLASTS FOR 'FIBULAR FLUORESCENT LAMPS General technical requirements for quality
STAS 4264-1986 ELECTRIC BELLS AND BUZZERS Technicalrequirements for quality
STAS SR EN 30012-1/C1-1996 Quality assurance requirements for measuring equipment Part 1: Metrotogical confirmation system for measuring equipment
STAS 5414-1983 ROTAR Y SWITCHES AND CIRCUIT BREAKERS UP TO 100 A AND 660 V a.c. AND 440 V d.c. Special technical requirements
STAS 10940-1978 Information processing 7 TRACK, MAGNETIC TAPE RECORDED AT 8 rpmm. Technical requirements for quality.
STAS 7352/2-1987 APARATUS FOR BLOOD PRESSURE MEASUREMENT WITH ELASTIC ELEMENT GAUGES General technical requirements for quality
STAS 8273/3-1984 Ballasts for gaz discharge lamps BALLASTS FOR HIGH PRESSURE SODIUM VAPOUR LAMPS Special technical requirements for quality
STAS 11190/3-1980 Electronic measuring instruments STABILIZED POWER SUPPLIES FOR MEASURING General prescriptions lor measuring tests
STAS 10145-1980 STANDARD REZISTORS General technical requirements for quality
STAS 9293-1973 GABLE SOCKETS Technical general requirements for quality
STAS 4483/1-1977 TELECOMMUNICATION CABLES General technical requirements for quality
STAS 3686/1-1974 CIRCUIT—BREAKEBS FOR ALTERNATING VOLTAGES ABOVE 1 kV General technical requirements for quality
STAS 6391/2-1986 BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1 kV General technical requirements for quality
STAS SR EN 30012-1-1995 Quality assurance requirements for measuring equipment. Part 1: Metrological confirmation system for measuring equipment
STAS 1020/1-1977 ELECTRICAL WELDING CABLES General technical requirements for quality
STAS 4986-1973 GENERAL PURPOSE POCKET I.AMPS General technical requirements for qnality
STAS 10784/1-1977 TURBO-GENERATORS General technical requirements for quality
STAS 10784/1-1977-1 TURBO-GENERATORS General technical requirements for quality
STAS 1703/1-1980 Power transformers GENERAL TECHNICAL REQUIRE- MENTS FOR QUALITY
STAS 9057/2-1971 ELECTROMEDICAL APPARATUS AND EQUIPMENT Tehnical requirements [for quality
STAS 9057/2-1971-1 ELECTROMEDICAL APPARATUS AND EQUIPMENT Technical requirements for quality
STAS 4130-1977 COPPER ROUND WIRE FOR ELECTROTECHNICAL PURPOSES General technical requirements for quality
STAS 8421-1987 Temperature measurement TECHNICAL THERMOCOUPLES General technical requirements for quality
STAS 10429-1982 ELECTRICAL POWER SUPPLY SWITCHBORD FOR TELECOM MUNICATION General technical requirements for quality
STAS 11000-1986 Electrical rotating machines BRUSHES General technical requirements for quality
STAS 9838-1982 LABORATORY TORSION DYNAMOMETERS CALIBRATION. Tecchnical rrquircments for quality
STAS 12865-1990 Repairable contactors (Nothermetically sealed) for aircraft General technical requirements for quality
STAS 8533-1985 FLUID POWER SYSTEMS COMPONENTS OF FLUID POWER SYSTEM General technical requirements for quality
STAS 10405-1985 AXIAL FANS FOR PARTIAL MINE VENTILATION General technical quality requirements
STAS 7377-1973 NON-LINEAR RESISTOR TYPE ARRESTERS G eneral technical requiremenls for quality
STAS 12425-1986 MINE ELECTRIC LOCOMOTIVES Genera] technical requirements for quality
STAS 7833-1981 BICYCI.E DYNAMOS General technical requirements for quality
STAS 9226-1973 BANDAGES FOR TRAMWAY WHEELS General technical requirements for quality
STAS 9673/1-1987 SIGNALLING ELECTRIC INCANDESCENT LAMPS General technical requirements for quality
STAS 10915-1979 UNRECORDED MAGNETIC TAPES FOR INFORMATION INTERCHANGE USED AS AN INPUT/OUTPUT MEDIUM FOR COMPUTERS Technical requirements for quality

Professional Standard - Urban Construction, Electromagnetic flowmeter quality requirements

CJ/T 364-2011 Online calibration requirement for piping electromagnetic flowmeter
CJ/T 3017-1993 Submersible electromagnetic flowmeter

Professional Standard - Machinery, Electromagnetic flowmeter quality requirements

JB/T 9248-2015 Electromagnetic flowmeter
JB/T 9248-1999 Electromagnetic flowmeters
JB/T 50134.1-1999 Quality requirements for mobile power station product quality grading
JB/T 51089-1999 Product quality classification of electromagnetic ammeters for tractors and internal combustion engines
JB/T 51084-1999 Product quality classification of permanent magnet alternators for tractors and internal combustion engines

Group Standards of the People's Republic of China, Electromagnetic flowmeter quality requirements

T/ZZB 0354-2018 Electromagnetic flowmeters
T/CAS ES380508007-2022 Rules for quality grading and evaluating of industrial products—Flow meter – Electromagnetic flowmeter
T/CAEPI 67-2023 Technical Requirements for Portable (Magnetostrictive) Open Channel Flowmeters
T/CMA NY050-2020 Technical requirements of flow measurement for industrial steam
T/CMA YJ051-2021 Technical Requirements of Flow Measurement for Mixed Gas
T/CFLP 0008-2017 The Requirements of Service Quality for Transportation Packaging of Energy Measurement instruments
T/GDLIA 11-2023 Quality requirement of trading logistics service
T/DGSWLHYXH 007-2019 Green logistics service quality requirements
T/CIECCPA 002-2022 Quality control requirements of remanufacturing three-phase permanent magnet motor
T/SHMHZQ 122-2022 Quality requirements for audit consulting services
T/CASME 706-2023 Quality inspection requirements and testing process for electric scooters
T/SZAS 50-2022 Assessment requirements for quality grading and forerunner - direct-current motor
T/CPSS 1010-2021 Power quality technical requirements for low-voltage AC distribution system of civil buildings
T/CSBME 039-2021 Requirements for quality control of carotid magnetic resonance vessel wall imaging
T/CSTE 0207-2022 Assessment requirements for quality grading and forerunner —magnetic exercise bicycles
T/IGIA 003-2020 General quality requirements for electric scooter
T/CEA 8012-2021 Quality management system requirements for elevator industry
T/SZEIA 004-2023 Electronic product refurbishment quality management requirements
T/CNHA 1061-2023 Quality Technical Requirements for Kitchen Appliances for Centralized Purchase and Similar Purposes integration (electromagnetism) cooking appliances
T/CFLP 0040-2022 Assessment requirements for forerunner standards—Integrated Logistics Services
T/CEC 669-2022 Energy router electromagnetic compatibility requirements and test methods
T/IGIA 008-2022 General quality requirements for handheld lithium cleaning machine
T/CMEPCA 004-2023 3.Assessment requirements for quality grading and forerunner — motor
T/CASME 810-2023 Pack assembly quality requirements for lithium-ion battery modules

Korean Agency for Technology and Standards (KATS), Electromagnetic flowmeter quality requirements

KS B 5260-1995 Electromagnetic flowmeters
KS B 5260-2009(2019) Electromagnetic flowmeters
KS B ISO TR 11974-2005(2015) Measurement of liquid flow in open channels－Electromagnetic current meters
KS B ISO 13359:2014 Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
KS B ISO 13359:2004 Measurement of conductive liquid flow in closed conduits-Flanged electromagnetic flowmeters-Overall length
KS B ISO 13359-2014(2019) Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
KS C IEC 62052-11-2005(2020) Electricity metering equipments(a.c)－General requirements, tests and test conditions－Part 11：Metering equipment
KS B ISO 14554-1:2021 Quality requirement for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements
KS B ISO 14554-2:2021 Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements
KS B ISO 14554-1:2016 Quality requirement for welding - Resistance welding of metallic materials -Part 1 : Comprehensive quality requirements
KS B ISO 14554-2:2016 Quality requirements for welding - Resistance welding of metallic materials -Part 2 : Elementary quality requirements
KS B 0907-2001 Quality requirements for welding - Resistance welding of metallic materials -Part 2 : Elementary quality requirements
KS B 0906-2001 Quality requirement for welding - Resistance welding of metallic materials -Part 1 : Comprehensive quality requirements
KS C IEC 62054-21-2017(2022) Electricity metering (a.c.) ― Tariff and load control ― Part 21: Particular requirements for time switches
KS C IEC 62475:2020 High-current test techniques — Definitions and requirements for test currents and measuring systems
KS B ISO TS 15768:2020 Measurement of liquid velocity in open channels —Design, selection and use of electromagnetic current meters
KS C IEC 62053-23:2005 Electricity metering equipments(a.c)－Particular requirements－Part 23：Static meters for reactive energy(classes 2 and 3)

Japanese Industrial Standards Committee (JISC), Electromagnetic flowmeter quality requirements

JIS B 7554:1997 Electromagnetic flowmeters
JIS Z 8764:1980 Method of flow measurement by electromagnetic flowmeters
JIS C 1910-1:2017 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings -- Part 1: Requirements for measuring instruments
JIS H 7311:2018 Superconductivity -- AC loss measurements -- Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
JIS H 7311:2006 Superconductivity -- AC loss measurements -- Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites

Association Francaise de Normalisation, Electromagnetic flowmeter quality requirements

NF UTE C46-305:1981 Mesure et commande dans les processus industriels - Débitmètres électromagnétiques - Prescriptions de qualification - Prescriptions provisoires.
NF C46-305:1981 Industrial-Process Measurement and Control Electromagnetic flowmeters Qualification Requirements
UTE C46-305U*UTE C46-305:1981 Industrial-process measurement and control. Electromagnetic flowmeters. Qualification requirments.
NF X10-120:1995 Measurement of conductive liquid flow in closed conduits. Method using electromagnetic flow meters.
NF X10-121*NF EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
NF EN ISO 20456:2019 Mesurage du débit des fluides dans les conduites fermées - Lignes directrices pour l'utilisation des débitmètres électromagnétiques dans les liquides conducteurs
NF X10-121:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids.
NF EN 62053-61:1998 Équipement de comptage de l'électricité (c.a.) - Prescriptions particulières - Partie 61 : puissance absorbée et prescriptions de tension.
NF C99-133-1*NF EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1 : requirements for measuring instruments
NF EN ISO 14554-2:2014 Exigences de qualité en soudage - Soudage par résistance des matériaux métalliques - Partie 2 : exigences de qualité élémentaire
NF EN ISO 14554-1:2014 Exigences de qualité en soudage - Soudage par résistance des matériaux métalliques - Partie 1 : exigences de qualité complète
NF A89-260-2*NF EN ISO 14554-2:2014 Quality requirements for welding - Resistance welding of metallic materials - Part 2 : elementary quality requirements
NF A89-260-1*NF EN ISO 14554-1:2014 Quality requirements for welding - Resistance welding of metallic materials - Part 1 : comprehensive quality requirements
NF S31-137-1*NF ISO 17534-1:2015 Acoustics - Software for the calculation of sound outdoors - Part 1 : quality requirements and quality assurance
NF EN 61788-13:2013 Supraconductivité - Partie 13 : mesure des pertes en courant alternatif - Méthodes de mesure par magnétomètre des pertes par hystérésis dans les composites multi-filamentaires supraconducteurs
NF EN 60255-151:2010 Relais de mesure et dispositifs de protection - Partie 151 : exigences fonctionnelles pour les protections à maximum et minimum de courant
NF C44-470-2*NF EN 50470-2:2007 Electricity metering equipment (a.c.) - Part 2 : particular requirements - Electromechanical meters for active energy (class indexes A and B)
NF X07-009-1:1994 Quality assurance requirements for measuring equipment. Part 1 : metrological confirmation system for measuring equipment.
NF C44-470-1*NF EN 50470-1:2007 Electricity metering equipment (a.c.) - Part 1 : general requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
NF C44-470-1/A1*NF EN 50470-1/A1:2018 Electricity metering equipment (a.c.) - Part 1 : general requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
NF C44-053-61*NF EN 62053-61:1998 Electricity metering equipment (a.c.). Particular requirements. Part 61 : power consumption and voltage requirements.
NF C44-053-22*NF EN IEC 62053-22:2021 Electricity metering equipment - Particular requirements - Part 22 :static meters for AC active energy (classes 0,1S, 0,2S and 0,5S)
NF C44-053-21/A1*NF EN 62053-21/A1:2017 Electricity metering equipment (a.c.) - Particular requirements - Part 21 : static meters for active energy (classes 1 and 2)
NF EN 62053-11:2003 Équipement de comptage de l'électricité (c.a.) - Prescriptions particulières - Partie 11 : compteurs électromécaniques d'énergie active (classes 0,5, 1 et 2)
NF C44-470-3*NF EN 50470-3:2007 Electricity metering equipment (a.c.) - Part 3 : particular requirements - Static meters for active energy (class indexes A, B and C).
NF C41-109*NF EN 62475:2011 High-current test techniques - Definitions and requirements for test currents and measuring systems.
NF C44-053-22/A1*NF EN 62053-22/A1:2017 Electricity metering equipment (a.c.) - Particular requirements - Part 22 : static meters for active energy (classes 0,2 S and 0,5 S)

Professional Standard - Environmental Protection, Electromagnetic flowmeter quality requirements

HJ/T 367-2007 Technical requirement for environmental protection products. Electromagnetic pipe flowmeters
HJ/T 366-2007 Technical requirement for environmental protection products. Ultrasonic pipe flowmeters
HJ 15-2019 Ultrasonic open channel sewage flowmeter technical requirements and testing methods

British Standards Institution (BSI), Electromagnetic flowmeter quality requirements

BS EN ISO 6817:1993 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
BS EN ISO 20456:2019 Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
BS EN 62053-61:1999 Electricity metering equipment (a.c.). Particular requirements. Power consumption and voltage requirements
BS ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
16/30323541 DC BS ISO 20456. Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
BS ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
BS EN 62053-22:2003 Electricity metering equipment (a.c.) - Particular requirements - Static meters for active energy (classes 0,2 S and 0,5 S)
BS EN 62053-21:2003 Electricity metering equipment (a.c.) - Particular requirements - Static meters for active energy (classes 1 and 2)
BS EN 29104:1991 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
BS EN 62053-23:2003 Electricity metering equipment (a.c.) - Particular requirements - Static meters for reactive energy (classes 2 and 3)
BS ISO 21562:2020 Ships and marine technology. Bunker fuel mass flow meters on receiving vessel. Requirements
BS EN 62053-11:2003 Electricity metering equipment (a.c.) - Particular requirements - Electromechanical meters for active energy (classes 0,5, 1 and 2)
BS EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings. Requirements for measuring instruments
19/30340762 DC BS ISO 21562. Ships and marine technology. Bunker fuel mass flow meters on receiving vessel. Requirements
BS EN ISO 14554-2:2013 Quality requirements for welding. Resistance welding of metallic materials. Elementary quality requirements
BS EN ISO 14554-1:2013 Quality requirements for welding. Resistance welding of metallic materials. Comprehensive quality requirements
BS ISO 17534-1:2015 Acoustics. Software for the calculation of sound outdoors. Quality requirements and quality assurance
BS EN IEC 62053-21:2021+A11:2021 Electricity metering equipment. Particular requirements. Static meters for AC active energy (classes 0,5, 1 and 2)
BS EN 62053-24:2015 Electricity metering equipment (a.c.). Particular requirements. Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)
BS EN 62052-11:2003 Electricity metering equipment (AC) - General requirements, tests and test conditions - Metering equipment
BS EN 50470-1:2006+A1:2018 Electricity metering equipment (a.c.) - General requirements, tests and test conditions. Metering equipment (class indexes A, B and C)
BS EN 62053-11:2003+A1:2017 Electricity metering equipment (a.c.). Particular requirements. Electromechanical meters for active energy (classes 0,5, 1 and 2)
BS EN 61788-13:2003 Superconductivity - AC loss measurements - Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
BS EN 60255-26:2010 Measuring relays and protection equipment. Electromagnetic compatibility requirements
BS EN 60255-26:2013 Measuring relays and protection equipment. Electromagnetic compatibility requirements
19/30350319 DC BS EN IEC 62052-11. Electricity metering equipment (a.c.). General requirements, tests and test conditions. Part 11. Metering equipment
BS EN 62054-21:2004+A1:2017 Electricity metering (AC). Tariff and load control. Particular requirements for time switches
19/30350370 DC BS EN IEC 62053-23. Electricity metering equipment (a.c.). Particular requirements. Part 23. Static meters for reactive energy (classes 2 and 3)
PD IEC TS 62600-30:2018 Marine energy. Wave, tidal and other water current converters. Electrical power quality requirements
BS EN 50470-2:2006+A1:2018 Electricity metering equipment (a.c.) - Particular requirements. Electromechanical meters for active energy (class indexes A and B)
BS EN IEC 62052-11:2021+A11:2022 Electricity metering equipment. General requirements, tests and test conditions - Metering equipment
BS ISO 27025:2023 Space systems. Programme management. Product quality assurance requirements
BS EN IEC 62053-22:2021 Electricity metering equipment. Particular requirements - Static meters for AC active energy (classes 0,1S, 0,2S and 0,5S)
18/30350374 DC BS EN 62053-24. Electricity metering equipment (a.c.). Particular requirements. Part 24. Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1S and 1)
BS EN 61326-1:2013 Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements
22/30461479 DC BS ISO 27025. Space systems. Programme management. Quality assurance requirements
BS EN 50470-4:2023 Electricity metering equipment - Particular requirements. Static meters for DC active energy (class indexes A, B and C)
BS EN 60255-151:2010 Measuring relays and protection equipment. Functional requirements for over/under current protection
BS EN 60255-151:2009 Measuring relays and protection equipment - Functional requirements for over/under current protection
BS CECC 210000:1995 Harmonized system of quality assessment for electronic components - Requirements for technology approval schedules (TAS)
BS EN 62054-11:2004+A1:2017 Electricity metering (a.c.). Tariff and load control. Particular requirements for electronic ripple control receivers
BS EN 62475:2010 High-current test techniques. Definitions and requirements for test currents and measuring systems
BS EN 60255-26:2009 Measuring relays and protection equipment - Electromagnetic compatibility requirements
BS EN 60255-26:2005 Electrical relays - Electromagnetic compatibility requirements for measuring relays and protection equipment

United States Navy, Electromagnetic flowmeter quality requirements

NAVY MIL-F-24291 C NOTICE 1-1998 FLOWMETER, FLUID ELECTROMAGNETIC TYPE
NAVY MIL-F-24291 C-1990 FLOWMETER, FLUID ELECTROMAGNETIC TYPE
NAVY MIL-PRF-85337 B-2012 MANUALS, TECHNICAL: QUALITY ASSURANCE PROGRAM; REQUIREMENTS FOR

未注明发布机构, Electromagnetic flowmeter quality requirements

BS ISO/TR 11974:1997(1999) Measurement of liquid flow in open channels — Electromagnetic current meters
BS EN ISO 6817:1997(1999) Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters
BS ISO 13359:1998(1999) Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
BS ISO TS 15768:2000 Measurement of liquid velocity in open channels - Design , selection and use of electromagnetic current meters
DIN EN ISO 14554-1:2000 Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements
BS EN 30012-1:1994(1998)*BS 5781-1-1994, ISO 10012-1:1992 Quality assurance requirements for measuring equipment — Part 1 : Metrological confirmation system for measuring equipment

American National Standards Institute （ANSI), Electromagnetic flowmeter quality requirements

ANSI/ASME MFC-16M-2007 Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters
BS ISO 15259:2023 Air quality. Measurement of stationary source emissions. Requirements for measurement sections and sites and for the measurement objective, plan and report (British Standard)

ETSI - European Telecommunications Standards Institute, Electromagnetic flowmeter quality requirements

TS 102 845-2018 User Group; Quality of ICT Services; Requirements for Check-up on Metering and Billing Processes (V2.0.0)
TS 102 845-2010 User Group; Quality of ICT Services; Requirements for Check-up on Metering and Billing Processes (V1.2.1)
TS 102 845-2009 User Group; Quality of ICT Services; Requirements and Method for checking Metering and Billing systems (V1.1.1)
TS 102 846-2010 User Group; Quality of ICT Services; Requirements for Bodies Providing Conformity Assessment of Checking-up on Metering and Billing Processes (V1.1.1)

National Metrological Verification Regulations of the People's Republic of China, Electromagnetic flowmeter quality requirements

JJG 1033-2007 Electromagnetic Flowmeters

RU-GOST R, Electromagnetic flowmeter quality requirements

GOST 28723-1990 Velocity electromagnetic and vortex flowmeters. General technical requirements and test methods
GOST 4.158-1985 System of product-quality indices. Volumetric, velocity counters, batchmeters and flowmeters. Electromagnetic flowmeters. Vortex flowmeters, batchmeters and metering plants. Nomenclature of indices
GOST 5.357-1970 Electromagnetic relays type ANSH2 and ANSH5. Quality requirements for certified production
GOST 31819.23-2012 Electricity metering equipment (a.c). Particular requirements. Part 23. Static meters for reactive energy
GOST 31819.11-2012 Electricity metering equipment (a.c). Particular requirements. Part 11. Electromechanical meters for active energy (classes 0,5; 1 and 2)
GOST 31819.21-2012 Electricity metering equipment (a.c). Particular requirements. Part 21. Static meters for active energy (classes 1 and 2)
GOST 31819.22-2012 Electricity metering equipment (a.c.). Particular requirements. Part 22. Static meters for active energy classes (0,2S and 0,5S)
GOST R 8.909-2016 State system for insuring the uniformity of measurements. Secondary standards of units of mass and volumetric flow rate, mass and volume fluid. General metrological and technical requirements
GOST 5.1644-1972 Axial fans. Quality requirements for certified production
GOST 8.320-1978 State system for ensuring the uniformity of measurements. Flowmeter electromagnetic industry. Methods and means for verification
GOST R 8.675-2009 State system for ensuring the uniformity of measurements. Electromagnetic flowmeter. Salibration methods
GOST 31818.11-2012 Electricity metering equipment (a.c). Particular general requirements. Tests and test conditions. Part 11. Meters for electric energy
GOST 13109-1997 Electric energy. Electromagnetic compatibility of technical equipment. Power quality limits in public electrical systems
GOST 13109-1987 Electrical energy. Demand for quality of electrical energy in general purpose electrical networks
GOST R 55753-2013 Complex quality control system. Electronic components. Requirements quality assurance and quality control
GOST R 8.787-2012 State system for ensuring the uniformity of measurements. Mass of mazut. Measurement of the fuel oil mass in railway tanks. General metrological requirements
GOST R 8.786-2012 State system for ensuring the uniformity of measurements. Fuel oil mass. Measurement procedure in horizontal storage tanks by indirect method of static measurements. General metrological requirements
GOST 5.197-1972 Electromagnetic relays types NMSH1, NMSH2, NMSH4, NMSHM1, NMSHM2, NMSHM4, AMSHM2, NM1, NM2, NM4, NMM1, NMM2, NMM4. Quality requirements for certified production
GOST 8.586.2-2005 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements
GOST IEC 62053-61-2012 Electricity metering equipment (a.c.). Particular requirements. Part 61. Power consumption and voltage requirements
GOST R 8.788-2012 State system for ensuring the uniformity of measurements. Mass of mazut. Measurement procedure in vertical storage tanks. General metrological requirements
GOST 30129-1996 Scale load cells. General technical requirements
GOST 8.586.1-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
GOST 8.586.4-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 4. Venturi tubes. Technical requirements

HU-MSZT, Electromagnetic flowmeter quality requirements

American Society of Mechanical Engineers (ASME), Electromagnetic flowmeter quality requirements

ASME MFC-16-2007 Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
ASME MFC-16-2014(R2019) Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
ASME MFC-16-2014 Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
ASME MFC-16M-1995 Measurement of fluid flow in closed conduits by means of electromagnetic flowmeters
ASME N45.2.11-1974 Quality assurance requirements for the design of nuclear power plants
ASME N45.2.12-1977 Requirements for auditing of quality assurance programs for nuclear power plants
ASME N45.2-1977 Quality assurance program requirements for nuclear facilities

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Electromagnetic flowmeter quality requirements

GJB 5998-2007 Specincation for electromagnetic flowmeters of ships
GJB 2712-1996 Quality assurance requirements for measuring equipment Metrological confirmation system

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electromagnetic flowmeter quality requirements

GB/T 18659-2023 Guidelines for the use of electromagnetic flowmeters for measuring fluid flow in closed pipes
GB/T 18660-2002 Measurement of conductive liquid flow in closed conduits--Method using electromagnetic flowmeters
GB/T 18659-2002 Measurement of fluid flow in closed conduits--Methods of evaluating the performance of electromagnetic flow-meters for liquids
GB/T 20729-2006 Measurement of conductive liquid flow in closed conduits Flanged electromagnetic flowmeters Overall length
GB/T 24359-2009 Quality requirements for third party logistics service
GB/T 29815-2013 The electromagnetic flowmeter based on HART protocol general technical specification
GB 11216-1989 General requirements of quality assurance program for effluent and environmental radioactivity monitoring at nuclear facilities
GB/T 19483-2016 Requirements and measurement methods of electromagnetic compatibility for cordless telephone
GB 19483-2004 Requirements and Measurement methods of electromagnetic compatibility for Cordless telephone
GB/T 19862-2016 General requirements for monitoring equipment of power quality
GB/T 19862-2005 General requirements for monitoring equipments of power quality
GB/T 9109.2-2014 Dynamic measurement of petroleum and liquid petroleum products.Part 2:Technical requirements of meter installation
GB 30439.5-2013 Safety requirements for industrial automation products.Part 5:Safety requirements for flowmeter
GB 19286-2003 Electromagnetic compatibility Requirement and measurement methods for Telecommunication Network Equipment
GB/T 19286-2015 Electromagnetic Compatibility Requirements and Measurement Methods for Telecommunications Network Equipment
GB/T 29316-2012 Power quality requirements for electric vehicle charging/battery swap infrastructure
GB/T 26572-2011 Requirements of concentration limits for certain restricted substances in electrical and electronic products

German Institute for Standardization, Electromagnetic flowmeter quality requirements

DIN EN ISO 6817:1995 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992); German version EN ISO 6817:1995
DIN EN ISO 20456:2020-09 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017); German version EN ISO 20456:2019
DIN EN ISO 20456:2020 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
DIN 94701:2021-02 Ventilation systems - Air meters and air energy meters - Requirements
DIN ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged-type electromagnetic flowmeters - Overall length (ISO 13359:1998)
DIN EN 29104:1993 Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991); German version EN 29104:1993
DIN EN 62054-21:2005 Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches (IEC 62054-21:2004); German version EN 62054-21:2004
DIN EN 62053-23:2003 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) (IEC 62053-23:2003); German version EN 62053-23:2003
DIN EN ISO 14554-2:2014-05 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2013); German version EN ISO 14554-2:2013
DIN EN ISO 14554-1:2014-05 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013); German version EN ISO 14554-1:2013
DIN SPEC 91411:2021 Requirements for the technical representation of magnetic measurement scales in design drawings
DIN ISO 17534-1:2022-05 Acoustics - Software for the calculation of sound outdoors - Part 1: Quality requirements and quality assurance (ISO 17534-1:2015); Text in German and English / Note: Date of issue 2022-03-25

International Organization for Standardization (ISO), Electromagnetic flowmeter quality requirements

ISO/TR 6817:1980 Measurement of conductive fluid flowrate in closed conduits — Method using electromagnetic flowmeters
ISO 21562:2020 Ships and marine technology — Bunker fuel mass flow meters on receiving vessel — Requirements
ISO 20456:2017 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
ISO 9104:1991 Measurement of fluid flow on closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids
ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
ISO 6817:1992 Measurement of conductive liquid flow in closed conduits; method using electromagnetic flowmeters
ISO/TS 15768:2000 Measurement of liquid velocity in open channels - Design, selection and use of electromagnetic current meters
ISO 14554-1:2013 Quality requirements for welding.Resistance welding of metallic materials.Part 1: Comprehensive quality requirements
ISO 14554-2:2013 Quality requirements for welding.Resistance welding of metallic materials.Part 2: Elementary quality requirements
ISO 14554-1:2000 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements
ISO 14554-2:2000 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements
ISO 7858-2:1987 Measurement of water flow in closed conduits; Meters for cold potable water; Combination meters; Part 2 : Installation requirements
ISO 10012-1:1992 Quality assurance requirements for measuring equipment; part 1: metrological confirmation system for measuring equipment
ISO 17534-1:2015 Acoustics - Software for the calculation of sound outdoors - Part 1: Quality requirements and quality assurance
ISO 4064-2:1978 Measurement of water flow in closed conduits; Meters for cold potable water; Part II : Installation requirements
ISO 15259 Air quality — Measurement of stationary source emissions — Requirements for measurement sections and sites and for the measurement objective, plan and report
ISO 3716:1977 Liquid flow measurement in open channels; Functional requirements and characteristics of suspended sediment load samplers

Professional Standard - Nuclear Industry, Electromagnetic flowmeter quality requirements

EJ/T 598-1991 Technical conditions of double-tube electromagnetic flowmeter
EJ/T 906-1994 Nuclear industry product design quality control requirements
EJ/T 907-1994 Process Quality Control Requirements for Nuclear Industry Process Materials

ES-UNE, Electromagnetic flowmeter quality requirements

UNE-EN ISO 20456:2021 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
UNE-EN ISO 14554-2:2014 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2013)
UNE-EN ISO 14554-1:2014 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14554-1:2013)
UNE-EN IEC 62053-21:2021 Electricity metering equipment - Particular requirements - Part 21: Static meters for AC active energy (classes 0,5, 1 and 2) (Endorsed by Asociación Española de Normalización in May of 2021.)
UNE-EN IEC 62053-21:2021/A11:2021 Electricity metering equipment - Particular requirements - Part 21: Static meters for AC active energy (classes 0,5, 1 and 2) (Endorsed by Asociación Española de Normalización in September of 2021.)

European Committee for Standardization (CEN), Electromagnetic flowmeter quality requirements

EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
EN 29104:1993 Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
EN ISO 6817:1995 Measurement of Conductive Liquid Flow in Closed Conduits - Method Using Electromagnetic Flowmeters ISO 6817: 1992
EN ISO 14554-1:2013 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements
EN ISO 14554-2:2013 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements
prEN 30012-1-1993 Quality assurance requirements for measuring equipment; part 1: metrological confirmation system for measuring equipment (ISO 10012-1:1992)
EN ISO 14554-1:2000 Quality Requirements for Welding - Resistance Welding of Metallic Materials - Part 1: Comprehensive Quality Requirements
EN ISO 14554-2:2000 Quality Requirements for Welding - Resistance Welding of Metallic Materials - Part 2: Elementary Quality Requirements ISO 14554-2:2000

AT-ON, Electromagnetic flowmeter quality requirements

ONORM M 5885-1998 Measurement of pH - Requirements for electrometric additional devices for pH-meters
ONORM M 5921-1988 Heatmeters (meters for quantities of heat) for liquid heat carrier fluids; requirements for measurement
ONORM EN 29104-1993 Measurement of fluid flow in closed conduits - Methods of evaluating the Performance of electromagnetic flow-meters forliquids (ISO 9104:1991)

Danish Standards Foundation, Electromagnetic flowmeter quality requirements

DS/EN ISO 6817:1996 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
DS/EN 29104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/ISO 9104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/EN 29104:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/EN ISO 14554-1:2000 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements
DS/EN ISO 14554-2:2000 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements
DS/EN 30012-1:1994 Quality assurance requirements for measuring equipment. Part 1: Metrological confirmation system for measuring equipment
DS/EN 50470-1:2007 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
DS/EN 62053-22:2003 Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 and 0,5)
DS/EN 62053-21:2003 Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)
DS/EN 50470-3:2007 Electricity metering equipment (a.c.) - Part 3: Particular requirements - Static meters for active energy (class indexes A, B and C)
DS/EN 62053-61:1999 Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements
DS/EN 62475:2011 High-current test techniques - Definitions and requirements for test currents and measuring systems
DS/IEC TR 63282:2020 LVDC systems – Assessment of standard voltages and power quality requirements

SAE - SAE International, Electromagnetic flowmeter quality requirements

SAE AIR6202-2012 Test Cell Mass Fuel Flow Measurement Using Coriolis Flow Meters

Society of Automotive Engineers (SAE), Electromagnetic flowmeter quality requirements

SAE AIR6202-2017 Test Cell Mass Fuel Flow Measurement Using Coriolis Flow Meters
SAE ARP7212-2022 Recommended Design and Test Requirements for Hydraulic Flow Regulators
SAE J2894/1-2011 Power Quality Requirements for Plug-In Electric Vehicle Chargers
SAE J2894/1-2019 Power Quality Requirements for Plug-In Electric Vehicle Chargers
SAE J2894-1-2011 Power Quality Requirements for Plug-In Electric Vehicle Chargers
SAE J2894-2-2015 Power Quality Requirements for Plug-In Electric Vehicle Chargers
SAE J2894-1-2019 Power Quality Requirements for Plug-In Electric Vehicle Chargers

Chongqing Provincial Standard of the People's Republic of China, Electromagnetic flowmeter quality requirements

DB50/T 540-2014 Microelectronic Thermal Mass Gas Flow Meter

NL-NEN, Electromagnetic flowmeter quality requirements

NEN-ISO 9104:1994 Measurement of fluid flow in xlosed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)

Lithuanian Standards Office , Electromagnetic flowmeter quality requirements

LST EN ISO 6817:2001 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992)
LST EN 29104-2001 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
LST 1339-2000 Retted straw. Quality requirements. Determination and estimation
LST EN ISO 14554-2:2000 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements (ISO 14554-2:2000)
LST EN ISO 14554-1:2000 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements (ISO 14544-1:2000)
LST EN 50470-1-2007 Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
LST EN 50470-3-2007 Electricity metering equipment (a.c.) - Part 3: Particular requirements - Static meters for active energy (class indexes A, B and C)

AENOR, Electromagnetic flowmeter quality requirements

UNE-EN ISO 6817:1996 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS. METHOD USING ELECTROMAGNETIC FLOWMETERS. (ISO 6817:1992).
UNE-EN 29104:1996 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS. METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS. (ISO 9104:1991).
UNE-EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments
UNE 73402:1995 QUALITY ASSURANCE REQUIREMENTS FOR THE DESIGN OF NUCLEAR FACILITIES.
UNE-EN 62053-22:2003 Electricity metering equipment (a.c.) - Particular requirements -- Part 22: Static meters for active energy (classes 0,2 S and 0,5 S).
UNE-EN 62053-61:1999 ELECTRICITY METERING EQUIPMENT (A.C.) - PARTICULAR REQUIREMENTS. PART 61: POWER CONSUMPTION AND VOLTAGE REQUIREMENTS.
UNE-EN 62475:2012 High-current test techniques - Definitions and requirements for test currents and measuring systems

Standard Association of Australia （SAA）, Electromagnetic flowmeter quality requirements

AS 3912.1:1993 Quality assurance requirements for measuring equipment Part 1 : Metrological confirmation system for measuring equipment
AS 3778.2.4:2007 Measurement of water flow in open channels - General - Estimation of uncertainty of a flow rate measurement
AS ISO 13485:2017 Medical devices — Quality management systems — Requirements for regulatory processes
AS/NZS 61786.1:2021 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings, Part 1: Requirements for measuring instruments (IEC 61786-1:2013 (ED.1.0) MOD)
AS IEC 62053.41:2023 Electricity metering equipment — Particular requirements, Part 41: Static meters for DC energy (classes 0.5 and 1)
AS 1428.1:2001 Design for access and mobility - General requirements for access - New building work
AS 1428.1:1998 Design for access and mobility - General requirements for access - New building work
AS IEC 62475:2019 High-current test techniques — Definitions and requirements for test currents and measuring systems

Professional Standard - Post and Telecommunication, Electromagnetic flowmeter quality requirements

YD/T 3265-2017 Technical requirements and test methods of electromagnetic compatibility for DC port Of telecommunication & data equipments
YD/T 4271-2023 Technical requirements for automatic quality measurement of in-band flow information in telecom operators' networks
YD/T 1103-2001 Requirements and Measurement Methods of Electromagnetic Compatibility for Cordless Telephone
YD/T 968-2002 Requirements and methods of measurement of electromagnetic compatibility for telecommunication terminal equipment
YD/T 983-2013 Limits and methods of measurement of electromagnetic compatibility of telecommunication power supply equipment
YD/T 968-2010 Requirements and measurement methods of electromagnetic compatibility for telecommunication terminal equipment
YD/T 968-2023 Electromagnetic Compatibility Requirements and Measurement Methods for Telecom Terminal Equipment
YD/T 2654-2013 Electromagnetic Compatibility Requirements and Measurement Methods for Wireless Power Devices

European Committee for Electrotechnical Standardization（CENELEC）, Electromagnetic flowmeter quality requirements

EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments
EN 62058-21:2010 Electricity metering equipment (a.c.) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B)
EN 62052-11:2003 Electricity metering equipment (AC) General requirements, tests and test conditions Part 11: Metering equipment

GOSTR, Electromagnetic flowmeter quality requirements

GOST 9486-1979 Alternating current measuring bridges. General requirements
GOST R 56234.1-2019 Acoustics. Software for the calculation of sound outdoor. Part 1. Quality requirements and quality assurance

Professional Standard - Meteorology, Electromagnetic flowmeter quality requirements

QX/T 219-2013 Technical requirements for metrology laboratory of air speed

Henan Provincial Standard of the People's Republic of China, Electromagnetic flowmeter quality requirements

DB4102/T 010-2020 Installation and construction requirements of gas Roots flowmeter
DB4102/T 011-2020 Gas turbine flowmeter installation and construction requirements
DB4102/T 009-2020 Gas ultrasonic flowmeter installation and construction requirements

CSIC-HYS, Electromagnetic flowmeter quality requirements

HYS-2-1989 The provision technical regulation for flowmeter and liquidometer of wastewater in open channel

ANS - American Nuclear Society, Electromagnetic flowmeter quality requirements

15.8-1995 Quality assurance program requirements for research reactors

Professional Standard-Ships, Electromagnetic flowmeter quality requirements

CB 973-1981 Diesel Engine Parts Magnetic Particle Inspection Quality Requirements (Trial)
CB/Z 233-1987 Press-fit calculation and quality requirements for stern tube bearings
CB/T 3606-1993 Mechanical and electrical equipment installation quality requirements
CB/T 3624-1994 Diesel generator set installation quality requirements

Professional Standard - Electron, Electromagnetic flowmeter quality requirements

SJ/T 10419-1993 Quality control pivot of production for plastic sealed electromagnetic relays
SJ/T 9559.5-1993 D.C. permanent magnet torque motor--Quality grading standard
SJ/T 9559.9-1993 D.C. permanent magnet motors for recorders--Quality grading standard
SJ/T 9559.12-1993 D.C. servomotors for data tape transport--Quality grading standard
SJ/T 9559.11-1993 D.C. brushless motors for use in diskette drivers--Quality grading standard
SJ/T 10664-1995 Technical requirements and measuring methods for e1ectromagnetic compatibility of telephone terminal

International Federation of Trucks and Engines, Electromagnetic flowmeter quality requirements

NAVISTAR MPAPS P-9516-2014 Quality Requirements For Resistance Spot Welds
NAVISTAR MPAPS P-9516-2016 Quality Requirements for Resistance Spot Welds
NAVISTAR TMS 9516-2014 VOID - Quality Requirements For Resistance Spot Welds
NAVISTAR TMS 9565-2014 VOID - Truck Door Trim Design, Performance, and Quality Requirements
NAVISTAR TMS 9564-2014 VOID - Truck Instrument Panel Assembly Design, Performance, and Quality Requirements

American Society for Testing and Materials (ASTM), Electromagnetic flowmeter quality requirements

ASTM D5089-95(1999) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM D5089-95(2014) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters

International Electrotechnical Commission (IEC), Electromagnetic flowmeter quality requirements

IEC 62052-11:2020 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment
IEC 62052-11:2003+AMD1:2016 CSV Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment
IEC 62053-23:2003 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
IEC 62053-61:1998 Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements
IEC 61786-1:2013 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments (Proposed Horizontal Standards)
IEC 62053-41:2021 Electricity metering equipment - Particular requirements - Part 41: Static meters for DC energy (classes 0,5 and 1)
IEC 62053-52:2005 Electricity metering equipment (AC) - Particular requirements - Part 52: Symbols
IEC 62053-23:2003/AMD1:2016 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3); Amendment 1
IEC 61326-1:1998 Electrical equipment for measurement, control and laboratory use - EMC requirements
IEC 62053-24:2014 Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)
IEC 62053-24:2016 Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1)
IEC 62053-11:2016 Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
IEC 62053-11:2003+AMD1:2016 CSV Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
IEC 61788-13:2003 Superconductivity - Part 13: AC loss measurements; Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
IEC 62053-22:2020 Electricity metering equipment (a.c.) - Particular Requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
IEC 62053-22:2003+AMD1:2016 CSV Electricity metering equipment (a.c.) - Particular Requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
IEC 62053-24:2014/AMD1:2016 Electricity metering equipment (a.c.) - Particular requirements - Part 24: Static meters for reactive energy at fundamental frequency (classes 0,5 S, 1 S and 1); Amendment 1

国家市场监督管理总局, Electromagnetic flowmeter quality requirements

RB/T 067-2021 Quality management system requirements for logistics service organizations

US-FCR, Electromagnetic flowmeter quality requirements

FCR NE-F-2-4-1981 QUALITY VERIFICATION PROGRAM REQUIREMENTS (INACTIVE FOR NEW DESIGN)
FCR NE-F-2-2 (6)-1982 QUALITY ASSURANCE PROGRAM REQUIREMENTS (AMENDMENTS INCORPORATED) (INACTIVE FOR NEW DESIGN)
FCR NE-F-2-2 (7)-1982 QUALITY ASSURANCE PROGRAM REQUIREMENTS (AMENDMENTS INCORPORATED) (INACTIVE FOR NEW DESIGN)
FCR NE-F-2-2 (4)-1976 QUALITY ASSURANCE PROGRAM REQUIREMENTS (AMENDMENTS INCORPORATED) (INACTIVE FOR NEW DESIGN)
FCR NE-F-2-2 (5)-1979 QUALITY ASSURANCE PROGRAM REQUIREMENTS (AMENDMENTS INCORPORATED) (INACTIVE FOR NEW DESIGN)
FCR NE-F-2-10-1985 QUALITY ASSURANCE PROGRAM REQUIREMENTS (SUPPLEMENT TO ANSI/ASME NQA-1) (INACTIVE FOR NEW DESIGN)

North Atlantic Treaty Organization Military Agency for Standardization (NATO-MAS), Electromagnetic flowmeter quality requirements

AQAP-2105-2009 NATO requirements for deliverable quality plans
AQAP-2110-2009 "NATO quality assurance requirements for design, development and production"

NATO - North Atlantic Treaty Organization, Electromagnetic flowmeter quality requirements

AQAP-2105-2019 NATO REQUIREMENTS FOR QUALITY PLANS (ED C; Ver. 1)
AQAP 2105-2005 NATO REQUIREMENTS FOR DELIVERABLE QUALITY PLANS (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int. For additi
AQAP 2110-2003 NATO QUALITY ASSURANCE REQUIREMENTS FOR DESIGN@ DEVELOPMENT AND PRODUCTION (ED 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: n
AQAP 2110-2006 NATO QUALITY ASSURANCE REQUIREMENTS FOR DESIGN@ DEVELOPMENT AND PRODUCTION (ED 2; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email:
AQAP-110-1995 NATO Quality Assurance Requirements for Design Development and Production (ED 2)

Anhui Provincial Standard of the People's Republic of China, Electromagnetic flowmeter quality requirements

DB34/T 1384-2011 Integrity measurement requirements of power supply enterprises

Professional Standard - Press and Publication, Electromagnetic flowmeter quality requirements

CY/T 111-2015 Basic specifications of e-book quality

CZ-CSN, Electromagnetic flowmeter quality requirements

CSN 36 7303-1989 Radio receivers. Quality requirements
CSN 25 7859-1990 Diaphragm gas meters. Fundamental parameters and technical requirements

BELST, Electromagnetic flowmeter quality requirements

STB 2192-2011 Telecom quality management systems. Requirements

KR-KS, Electromagnetic flowmeter quality requirements

KS B ISO 14554-1-2021 Quality requirement for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements
KS B ISO 14554-2-2021 Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements
KS B ISO 14554-2-2016 Quality requirements for welding - Resistance welding of metallic materials -Part 2 : Elementary quality requirements
KS B ISO 14554-1-2016 Quality requirement for welding - Resistance welding of metallic materials -Part 1 : Comprehensive quality requirements
KS C IEC 62475-2020 High-current test techniques — Definitions and requirements for test currents and measuring systems
KS B ISO TS 15768-2020 Measurement of liquid velocity in open channels —Design, selection and use of electromagnetic current meters

Professional Standard - Petroleum, Electromagnetic flowmeter quality requirements

SY/T 6999-2014 General requirements for flow meters on-line verification with a traveling gas flow standard facility
SY 6999-2014 General requirements for on-line verification of flowmeters with mobile gas flow standard devices

Professional Standard - Business, Electromagnetic flowmeter quality requirements

SB/T 11019-2013 Service procedure and quality requirement for hairdressing

Professional Standard - Public Safety Standards, Electromagnetic flowmeter quality requirements

GA/T 1379-2018 Basic requirements for the quality of DNA magnetic bead purification reagents for forensic science

American Nuclear Society (ANS), Electromagnetic flowmeter quality requirements

ANS 15.8-1995 Quality assurance program requirements for research reactors

International Truck and Engine Corporation (ITEC), Electromagnetic flowmeter quality requirements

INTERN TMS 9516-2008 Quality Requirements for Resistance Spot Welds in Steel

Professional Standard - Energy, Electromagnetic flowmeter quality requirements

NB/T 25001-2011 Quality assurance in siting for nuclear power plants
NB/T 20605-2021 General requirements for quality assurance of nuclear power plant suppliers
NB/T 41005-2014 General technical requirement of power quality control devices

Guangdong Provincial Standard of the People's Republic of China, Electromagnetic flowmeter quality requirements

DB44/T 1680-2015 Quality of Service Requirements for IP Network TV

SE-SIS, Electromagnetic flowmeter quality requirements

SIS SEN 08 01 01-1965 Lead-acid batteries Quality requirements for starter batteries
SIS SS IEC 801-3:1988 Electromagnetic compatibility for industrial-process measurement and control equipment — Radiated electromagnetic field requirements

YU-JUS, Electromagnetic flowmeter quality requirements

JUS ISO 10012-1:1993 Quality assurance requirements for measuring equipment. Part 1: Metrological confirmation system for measuring equipment
JUS B.E4.350-1987 Laboratory glassvvare. General quality reguirements of design and construction of volumetric glassvvare
JUS L.N4.208-1989 Tn?ustrial-process measuro.mcnt and control. Electromagoetic compatibillty? Electrostatlc dlscharge requiremeots

Defense Logistics Agency, Electromagnetic flowmeter quality requirements

DLA MIL-STD-981 B CHG NOTICE 4-2000 DESIGN, MANUFACTURING AND QUALITY STANDARDS FOR CUSTOM ELECTROMAGNETIC DEVICES FOR SPACE APPLICATIONS
DLA MIL-STD-981 C-2010 Design, Manufacturing and Quality Standards for Custom Electromagnetic Devices for Space Applications

API - American Petroleum Institute, Electromagnetic flowmeter quality requirements

API MPMS 21.2 ADD-2000 Manual of Petroleum Measurement Standards Chapter 21-Flow Measurement Using Electronic Metering Systems Addendum to Section 2-Flow Measurement Using Electronic Metering Systems@ Inferred Mass (First Edition)

PT-IPQ, Electromagnetic flowmeter quality requirements

NP 4360-1999 Meters for cold potable water Electromagnetic flowmeters. Terminology, definitions, technical characteristics and metrological characteristics

ZA-SANS, Electromagnetic flowmeter quality requirements

SANS 62053-52:2006 Electricity metering equipment (AC) - Particular requirements Part 52: Symbols

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Electromagnetic flowmeter quality requirements

ITU-T E.502-1989 Traffic Measurement Requirements for SPC (Especially Digital) Telecommunication Exchanges - Telephone Network and ISDN - Quality of Service@ Network Management and Traffic Engineering (Study Group II) 15 pp
ITU-T E.502 (REV 1)-1992 Traffic Measurement Requirements for Digital Telecommunication Exchanges (Study Group II) 23 pp

Sichuan Provincial Standard of the People's Republic of China, Electromagnetic flowmeter quality requirements

DB51/T 1318-2011 Technical requirements for coal quality acceptance for power generation

Professional Standard - Agriculture, Electromagnetic flowmeter quality requirements

GB/T 19022.1-1994 Quality Assurance Requirements for Measuring Equipment Part 1: Metrological Confirmation System for Measuring Equipment

NO-SN, Electromagnetic flowmeter quality requirements

NS-ISO 10012-1:1993 Quality assurance requirements for measuring equipment. Part 1: Metrological confirmation system for measuring equipment

Canadian Standards Association (CSA), Electromagnetic flowmeter quality requirements

CSA ISO 10012-1-97-CAN/CSA:1997 Quality Assurance Requirements for Measuring Equipment - Part 1: Metrological Confirmation System for Measuring Equipment R(2002)
CSA N286.0-92-CAN/CSA-1992 Overall Quality Assurance Program Requirements for Nuclear Power Plants Third Edition; General Instruction No 1

国家市场监督管理总局、中国国家标准化管理委员会, Electromagnetic flowmeter quality requirements

GB/T 37503-2019 Logistics public information platform service quality requirements and evaluation
GB/T 37139-2018 Requirements for EMC measurement methods for DC powered equipment
GB 8999-2021 General regulation of quality assurance for ionizing radiation monitoring

Professional Standard - Automobile, Electromagnetic flowmeter quality requirements

QC/T 29117.18.1-1993 Motorcycles and mopeds product quality inspection engine permanent magnet alternator quality assessment method

工业和信息化部, Electromagnetic flowmeter quality requirements

YD/T 983-2018 Electromagnetic compatibility requirements and measurement methods for communication power equipment
YD/T 3482-2019 Technical requirements for application security audit based on mobile network traffic

European Telecommunications Standards Institute (ETSI), Electromagnetic flowmeter quality requirements

ETSI TS 102 250-4-2009 Speech and multimedia Transmission Quality (STQ); QoS aspects for popular services in GSM and 3G networks; Part 4: Requirements for Quality of Service measurement equipment V1.3.1; Includes Diskette
ETSI TS 102 250-4-2011 Speech and multimedia Transmission Quality (STQ); QoS aspects for popular services in mobile networks; Part 4: Requirements for Quality of Service measurement equipment (V2.2.1; Includes Diskette)

International Telecommunication Union (ITU), Electromagnetic flowmeter quality requirements

ITU-R BT.1127-1994 Relative Quality Requirements of Television Broadcast Systems
ITU-R BT.1127 SPANISH-1994 Relative Quality Requirements of Television Broadcast Systems

Professional Standard - Aerospace, Electromagnetic flowmeter quality requirements

QJ 2671-1994 Quality management requirements for imported electronic components
QJ 1969-1990 General requirements for quality control of electronic products
QJ 2598-1994 Printed circuit board quality control procedures and requirements

Jilin Provincial Standard of the People's Republic of China, Electromagnetic flowmeter quality requirements

DB22/T 3438-2023 Production Quality Requirements for Interactive Animation Films

PL-PKN, Electromagnetic flowmeter quality requirements

PN S95021-1991 Measuring instruments for motor vehicles. Tachometers. Requirements and tests
PN E06506-1986 Elektricity meters Induction var-hour maters Requirements and tests

TH-TISI, Electromagnetic flowmeter quality requirements

TIS 1030-2009 Electricity metering equipment (ac): general requirements tests and test conditions

CU-NC, Electromagnetic flowmeter quality requirements

NC 98-81-1988 Cultural and Sport Items. Judo Timing and Information System. Quality Specifications

Professional Standard - Traffic, Electromagnetic flowmeter quality requirements

JT/T 408-1999 Check indexes and statistics requests of carrying quality for freight bu water

Xinjiang Provincial Standard of the People's Republic of China, Electromagnetic flowmeter quality requirements

DB65/T 3676-2014 Design requirements for agricultural product quality and safety information traceability labels

National Metrological Technical Specifications of the People's Republic of China, Electromagnetic flowmeter quality requirements

JJF 1186-2018 Reference material certificates and labeling requirements Metrological technical specifications

Institute of Electrical and Electronics Engineers (IEEE), Electromagnetic flowmeter quality requirements

IEEE 467-1980 IEEE Standard Quality Assurance Program Requirements for the Design and Manufacture of Class 1E Instrumentation and Electric Equipment for Nuclear Power Generating Stations

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Electromagnetic flowmeter quality requirements

IPC 6012B ITALIAN-2004 Qualification and Performance Specification for Rigid Printed Boards Qualificazione e Specifica dei Requisiti per i Circuiti Stampati Rigidi

National Electrical Manufacturers Association（NEMA), Electromagnetic flowmeter quality requirements

NEMA C82.77-10-2014 Harmonic Emission Limits - Related Power Quality Requirements