ZH
RU
ES
Composition Testing Standardization
Composition Testing Standardization, Total:500 items.
In the international standard classification, Composition Testing Standardization involves: Water quality, Ferrous metals, Testing of metals, Construction industry, Graphic technology, Non-ferrous metals, Ventilators. Fans. Air-conditioners, Products of the chemical industry, Bridge construction, Non-destructive testing, Vocabularies, Analytical chemistry, Petroleum products in general, Quality, Energy and heat transfer engineering in general, Services, Construction materials, Organic chemicals, Law. Administration, Welding, brazing and soldering, Leather technology, Medical equipment, Farming and forestry, Thermodynamics and temperature measurements, Textile fibres, Occupational safety. Industrial hygiene, Environmental protection, Biology. Botany. Zoology, Milk and milk products, Linear and angular measurements, Domestic safety, Alarm and warning systems, Optoelectronics. Laser equipment, FOOD TECHNOLOGY, Paints and varnishes, Civil engineering in general, Standardization. General rules, Coals, Railway rolling stock, Electricity. Magnetism. Electrical and magnetic measurements, Semiconducting materials, Components for electrical equipment, Explosion protection, Glass, Medical sciences and health care facilities in general, Radiation measurements, Applications of information technology, Pipeline components and pipelines, Fibre optic communications, Natural gas, Non-metalliferous minerals, Inorganic chemicals, Paint ingredients, Wood, sawlogs and sawn timber, Air quality, Fuels, Ceramics, Rubber and plastics products, Products of the textile industry, Products of non-ferrous metals, Iron and steel products, Structures of buildings, Cutting tools, Production of metals, Rubber, Raw materials for rubber and plastics, Semi-manufactures of timber, Materials for aerospace construction, Corrosion of metals, Metalliferous minerals, Industrial automation systems, Crude petroleum, Nuclear energy engineering, Ferroalloys, Information sciences. Publishing, Technical drawings, Road engineering, Pharmaceutics.
HU-MSZT, Composition Testing Standardization
American Society for Testing and Materials (ASTM), Composition Testing Standardization
- ASTM E3351-22 Standard Test Method for Detection of Nitric Oxide Production In Vitro
- ASTM D7045-17 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities
- ASTM D7045-04 Standard Guide for Optimization of Ground Water Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
- ASTM D6687-04 Standard Guide for Testing Printing Ink Vehicles and Components Thereof
- ASTM D4788-88(2001) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
- ASTM D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
- ASTM D4788-03(2022) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
- ASTM D2650-04 Standard Test Method for Chemical Composition of Gases By Mass Spectrometry
- ASTM E1806-96(2001) Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
- ASTM D2650-10(2021) Standard Test Method for Chemical Composition of Gases by Mass Spectrometry
- ASTM E1806-23 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
- ASTM D5354-95 Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
- ASTM D5354-95(2006) Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
- ASTM D5354-95(2020) Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
- ASTM C1324-15 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- ASTM F3106-14 Standard Guide for in vitro Osteoblast Differentiation Assays
- ASTM D2650-10(2015) Standard Test Method for Chemical Composition of Gases by Mass Spectrometry
- ASTM C1324-04 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- ASTM C1324-03 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- ASTM D7807-20 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
- ASTM E215-16 Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube
- ASTM D5317-98 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
- ASTM D5317-98(2003)e1 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
- ASTM D5317-98(2011) Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
- ASTM E1806-96(2006) Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
- ASTM E1833-07 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
- ASTM E255-02 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
- ASTM E1806-96 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
- ASTM E1806-18 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
- ASTM E1806-09(2016) Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
- ASTM E1833-07a(2013)e1 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
- ASTM D820-93(2016) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
- ASTM F3106-22 Standard Guide for in vitro Osteoblast Differentiation Assays
- ASTM E1311-14(2018) Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM E1311-14(2022) Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM E255-07 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
- ASTM D7138-07 Standard Test Method to Determine Melting Temperature of Synthetic Fibers
- ASTM D7138-16 Standard Test Method to Determine Melting Temperature of Synthetic Fibers
- ASTM E255-07(2014) Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
- ASTM E3045-21 Standard Practice for Crack Detection Using Vibroacoustic Thermography
- ASTM D6145-97 Standard Guide for Monitoring Sediment in Watersheds
- ASTM D6145-97(2002) Standard Guide for Monitoring Sediment in Watersheds
- ASTM D6145-97(2007) Standard Guide for Monitoring Sediment in Watersheds
- ASTM E1833-07a Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
- ASTM E32-21 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
- ASTM E1833-96(2001) Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
- ASTM E55-91(1996) Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
- ASTM E1833-96 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
- ASTM E32-86(1996)e1 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
- ASTM E255-23 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
- ASTM D5352-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
- ASTM D5352-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
- ASTM D5352-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
- ASTM D2650-10 Standard Test Method for Chemical Composition of Gases By Mass Spectrometry
- ASTM E1306-07 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
- ASTM F1364-92(1997)e1 Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
- ASTM F1364-03e1 Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
- ASTM F1364-03(2022) Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
- ASTM E1753-13 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
- ASTM E88-91(1996) Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
- ASTM D2799-23 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
- ASTM E2862-18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
- ASTM D6146-97(2002) Standard Guide for Monitoring Aqueous Nutrients in Watersheds
- ASTM D6146-97 Standard Guide for Monitoring Aqueous Nutrients in Watersheds
- ASTM D6146-97(2007) Standard Guide for Monitoring Aqueous Nutrients in Watersheds
- ASTM D2799-21 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal
- ASTM F1727-97 Standard Practice for Detection of Oxidation Induced Defects in Polished Silicon Wafers
- ASTM E1311-14 Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems
- ASTM E55-11(2022)e1 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
- ASTM E2520-15 Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors
- ASTM E2520-21 Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors
- ASTM F418-77(1996)e1 Standard Practice for Preparation of Samples of the Constant Composition Region of Epitaxial Gallium Arsenide Phosphide for Hall Effect Measurements
- ASTM E531-76(1996)e1 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
- ASTM E181-10 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
- ASTM E181-17 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
- ASTM E1118/E1118M-16 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
- ASTM E1118/E1118M-16(2020) Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)
- ASTM D820-93 Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
- ASTM D820-93(2003) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
- ASTM D6738-15(2019) Standard Test Method for Precipitated Silica—Volatile Content
- ASTM D5463-18 Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water
- ASTM E3045-22 Standard Practice for Crack Detection Using Vibroacoustic Thermography
- ASTM E88-91(2001) Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
- ASTM C1324-20 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- ASTM C1324-20a Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- ASTM E716-10 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis
- ASTM C560-88(2010)e1 Standard Test Methods for Chemical Analysis of Graphite
- ASTM D49-83(1996)e1 Standard Test Methods of Chemical Analysis of Red Lead
- ASTM C560-88(1998) Standard Test Methods for Chemical Analysis of Graphite
- ASTM C560-88(2005) Standard Test Methods for Chemical Analysis of Graphite
- ASTM C560-88(2005)e1 Standard Test Methods for Chemical Analysis of Graphite
- ASTM C560-15e1 Standard Test Methods for Chemical Analysis of Graphite
- ASTM C560-20 Standard Test Methods for Chemical Analysis of Graphite
- ASTM D49-83(2020) Standard Test Methods of Chemical Analysis of Red Lead
- ASTM E439-23 Standard Test Methods for Chemical Analysis of Beryllium
- ASTM D5463-98 Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water
- ASTM D6687-07(2013) Standard Guide for Testing Printing Ink Vehicles and Components Thereof
- ASTM E410-08 Standard Test Method for Moisture and Residue in Liquid Chlorine
- ASTM D5350-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
- ASTM D5350-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
- ASTM D5350-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
- ASTM C823-00 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
- ASTM C823/C823M-07 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
- ASTM B577-93(2004) Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
- ASTM C823/C823M-12 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
- ASTM B577-19 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
- ASTM C823/C823M-12(2017) Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
- ASTM D6782-05 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
- ASTM D6782-04 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
- ASTM D6782-19 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
- ASTM E32-15 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition
- ASTM E88-11 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
- ASTM E55-23 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
- ASTM D5176-20 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
- ASTM D5173-15 Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
- ASTM D820-93(2009) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
- ASTM G91-97(2004) Standard Practice for Monitoring Atmospheric SO2 Using the Sulfation Plate Technique
- ASTM D7457-11e1 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
- ASTM D7493-08 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection
- ASTM D7675-11 Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer
- ASTM D3171-11 Standard Test Methods for Constituent Content of Composite Materials
- ASTM C156-20 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
- ASTM D5176-91(2003) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
- ASTM D5176-91(1995) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
- ASTM D5176-08 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
- ASTM D5173-15(2023) Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide
- ASTM A262-98 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- ASTM A262-01 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- ASTM A262-02a(2008) Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- ASTM B890-02 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM B890-98 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM E55-11 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
- ASTM E55-11(2017) Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition
- ASTM D4179-11(2017) Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
- ASTM D5061-07 Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke
- ASTM D5061-19 Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke
- ASTM E545-99 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
- ASTM E545-05 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
- ASTM E545-14 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
- ASTM D5774-95(2004)e1 Standard Test Methods for Rubber From Synthetic Sources-Chemical Analysis of Extractables
- ASTM D820-93(2023) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
- ASTM D6227-18(2023) Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component
- ASTM E3243-21 Standard Specification for Field Detection Equipment and Assays Used for Fentanyl and Fentanyl-Related Compounds
- ASTM E3289-21 Standard Guide for Using Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds
- ASTM D6715-08 Standard Practice for Sampling and Preparation of Salt Preserved (Cured) Hides and Skins for Chemical and Physical Tests
- ASTM G108-23 Standard Test Methods for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
- ASTM D8474-23 Standard Test Method for Recovered Carbon Black (rCB)—Compositional Analysis by Thermogravimetry (TGA)
- ASTM D4444-13(2018) Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
- ASTM D7807-12 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
- ASTM F1364-03(2015) Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
- ASTM D4913-00(2005)e1 Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
- ASTM D4913-00(2011) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
- ASTM D5176-08(2015) Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection
- ASTM D4913-00(2016) Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors
- ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM E1306-11 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition
- ASTM E88-11(2017) Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
- ASTM E1753-04 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
- ASTM G3-13 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
- ASTM E1282-11 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
- ASTM C1324-05 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- ASTM C1324-10 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- ASTM E2862-12 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
- ASTM A830/A830M-06 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
- ASTM A830/A830M-11 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
- ASTM E1329-00 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis
- ASTM E1329-00(2005) Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis
- ASTM D6782-13 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
- ASTM D7184-12 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
- ASTM D7184-13 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
- ASTM E877-08 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition
- ASTM D4310-10 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
- ASTM D4810-06 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM D4810-88(1999) Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM D4810-20 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM D4810-06(2015) Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM D283-13 Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
- ASTM D283-13(2019) Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
- ASTM D5317-20 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
- ASTM D5317-98(2017) Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector
- ASTM D7237-15a Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
- ASTM D6687-07 Standard Guide for Testing Printing Ink Vehicles and Components Thereof
- ASTM C1030-95(2001) Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
- ASTM C1030-95 Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
- ASTM D4574-06 Standard Test Methods for Rubber Compounding Materials8212;Determination of Ash Content
- ASTM D5463-13 Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water
- ASTM G3-89(2004) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
- ASTM G3-89(2010) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
- ASTM D1135-86(1999) Standard Test Methods for Chemical Analysis of Blue Pigments
- ASTM D1135-86(2020) Standard Test Methods for Chemical Analysis of Blue Pigments
- ASTM E877-13 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties
- ASTM B772-97 Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
- ASTM A830/A830M-00 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
- ASTM A830/A830M-02 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
- ASTM B772-97(2003) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
- ASTM B772-97(2008) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
- ASTM B772-97(2012) Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)
- ASTM A830/A830M-13 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
- ASTM A830/A830M-14 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
- ASTM A830/A830M-18 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
- ASTM C1324-02 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- ASTM C1324-02a Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- ASTM C1324-96 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- ASTM D5430-93(2000) Standard Test Methods for Visually Inspecting and Grading Fabrics
- ASTM D5430-13(2017) Standard Test Methods for Visually Inspecting and Grading Fabrics
- ASTM F2259-10 Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
- ASTM D4984-89(1999) Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM D4984-20 Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes
- ASTM D7184-15(2019)e1 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
- ASTM G108-94(2004) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
- ASTM G108-94(1999) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
- ASTM G108-94(2010) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
- ASTM G91-97(2010) Standard Practice for Monitoring Atmospheric SO2 Using the Sulfation Plate Technique
- ASTM D7184-19 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
Shandong Provincial Standard of the People's Republic of China, Composition Testing Standardization
- DB37/T 5262-2023 Technical Standard for Quality Inspection of Underground Holes and Grooves
- DB37/T 3104-2018 SSR Molecular Testing Standard for Purity of Sunflower Hybrids
CEN - European Committee for Standardization, Composition Testing Standardization
- PD CEN/TR 10261:2018 Iron and steel - European standards for the determination of chemical composition
Danish Standards Foundation, Composition Testing Standardization
- DS/CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
- DS/EN 573-5:2007 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
European Committee for Standardization (CEN), Composition Testing Standardization
- PD CEN/TR 10261:2013 Iron and steel - European standards for the determination of chemical composition
- CEN/TR 10261:2023 Iron and steel - European standards for the determination of chemical composition
- CEN/TR 10317:2020 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products
- EN ISO 10360-7:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011)
- EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001)
- PD CEN/TR 10317:2013 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)
- PD CEN/TR 10317:2014 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)
- EN 13282-2:2015 Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition@ specifications and conformity criteria
- PD CEN/TR 10317:2009 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization
Group Standards of the People's Republic of China, Composition Testing Standardization
- T/CECS 253-2022 In-hole imaging inspection standard for foundation foundation
- T/CITS 0010-2022 Technical specification for grade assessment of Inspection and testing enterprise safety and health management system
- T/SXCAA 007-2020 Management Requirements for Standard Substances for Chemical Testing
- T/HPAESRCU 0001-2020 Integrated standard for complete set of gas distributed energy system
- T/HB 0008-2020 Inspection and testing scientific and technological achievements transformation service standardization income evaluation and distribution
- T/CSZX 001.11-2021 Part 11 of Standardization and Standardization Construction Specifications of Grassroots Branches of Market Supervision Administration: Inspection, Testing and Supervision
- T/SZGIA 6.1-2019 Genomics Data Normalization Part 1: General Specification
- T/SSACE 018-2022 Technical Standard for Inspection of Pumped Concrete Compressive Strength by Rebound Method in Chengdu
- T/CGCPU 007-2019 Evaluation Standards for Biosample Analysis and Detection Ability
- T/ZZQJ 010-2023 Firstborn Green Pepper Standard Complex Part 5: Raw Material Acceptance and Finished Product Inspection
International Organization for Standardization (ISO), Composition Testing Standardization
- ISO/TR 4644:2021 Nickels, ferronickels and nickel alloys — Standards for the determination of chemical composition
- ISO 16128-2:2017 Cosmetics - Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients - Part 2: Criteria for ingredients and products
- ISO 16128-2:2017/Amd 1:2022 Cosmetics — Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients — Part 2: Criteria for ingredients and products — Amendment 1
- ISO 16128-1:2016 Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products - Part 1: Definitions for ingredients
- ISO 6143:2001 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- ISO 13365:2011 Leather. Chemical tests. Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography
- ISO 22093:2003 Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS)
- ISO/TR 18828-1:2018 Industrial automation systems and integration - Standardized procedures for production systems engineering - Part 1: Overview
British Standards Institution (BSI), Composition Testing Standardization
- BS PD ISO/TR 4644:2021 Nickels, ferronickels and nickel alloys. Standards for the determination of chemical composition
- PD ISO/TR 4644:2021 Nickels, ferronickels and nickel alloys. Standards for the determination of chemical composition
- BS ISO 16128-2:2017+A1:2022 Cosmetics. Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients - Criteria for ingredients and products
- BS ISO 16128-2:2017 Cosmetics. Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients. Criteria for ingredients and products
- PD CEN/TR 10317:2020 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products
- 21/30435237 DC BS ISO 16128-2 AMD1. Cosmetics. Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients. Part 2. Criteria for ingredients and products
- BS ISO 16128-1:2016 Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products. Definitions for ingredients
- BS EN ISO 6143:2001 Gas analysis. Comparison methods for determining and checking the composition of calibration gas mixtures
- BS EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- BS EN ISO 18330:2003 Milk and milk products - Guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues
- BS EN 573-5:2007 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Codification of standardized wrought products
- BS PD CEN/TR 10317:2014 European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)
- BS ISO 22093:2011 Industrial automation systems and integration. Physical device control. Dimensional Measuring Interface Standard (DMIS)
Association Francaise de Normalisation, Composition Testing Standardization
- FD A54-109*FD ISO/TR 4644:2021 Nickels, ferronickels and nickel alloys - Standards for the determination of chemical composition
- FD CEN/TR 10261:2019 Aciers et fontes - Normes européennes pour la détermination de la composition chimique
- NF T75-640-2*NF ISO 16128-2:2017 Cosmetics -Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients - Part 2 : Criteria for ingredients and products
- NF ISO 16128-2:2017 Cosmétiques - Lignes directrices relatives aux définitions techniques et aux critères applicables aux ingrédients cosmétiques naturels et biologiques - Partie 2 : critères relatifs aux ingrédients et aux produits
- NF A09-120-3*NF EN ISO 3452-3:2014 Non-destructive testing - Penetrant testing - Part 3 : reference test blocks
- NF ISO 16128-2/A1:2022 Cosmétiques - Lignes directrices relatives aux définitions techniques et aux critères applicables aux ingrédients et produits cosmétiques naturels et biologiques - Partie 2 : critères relatifs aux ingrédients et aux produits - Amendement 1
- NF L09-505:2020 Aerospace series - Standardized electrical cables - Designation and reference composition
- NF X20-207*NF EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures
- NF T75-640-1*NF ISO 16128-1:2016 Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products - Part 1 : definitions for ingredients
- NF ISO 16128-1:2016 Lignes directrices relatives aux définitions techniques et aux critères applicables aux ingrédients et produits cosmétiques naturels et biologiques - Partie 1 : définitions des ingrédients
American National Standards Institute （ANSI), Composition Testing Standardization
- PD CEN/TR 10261:2023 Tracked Changes. Iron and steel. European standards for the determination of chemical composition (British Standard)
- ANSI/NFPA 720-2012 Standard for the Installation of Carbon Monoxide(CO) Detection and Warning Equipment
- BS ISO 5773:2023 Textiles. Determination of components in flax fibres (British Standard)
- ASTM D4180-23 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
- ASTM D4699-23 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
AASHTO - American Association of State Highway and Transportation Officials, Composition Testing Standardization
- T 219-1987 Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes
- T219-1987 Standard Specification for Testing Lime for Chemical Constituents and Particle Sizes (Eighteenth Edition)
German Institute for Standardization, Composition Testing Standardization
- DIN 24163-2:1985 Fans; performance testing, standardized test airways
- DIN 38408-5:1990-06 German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of chlorine dioxide (G 5)
- DIN 24163-3:1985 Fans; performance testing of small fans using standardized test airways
- DIN EN ISO 18330:2003 Milk and milk products - Guidelines for the standardized description of immunoassays or receptor assays for the detection of antimicrobial residues (ISO 18330:2003); German version EN ISO 18330:2003
- DIN 52340-10:1974 Testing of glass; chemical analysis of colourless soda-lime-glass with SiO<(Index)2>, CaO, MgO and Na<(Index)2>O as main constituents, determination of SO<(Index)3>
- DIN 52340-2:1974 Testing of glass; chemical analysis of colourless soda-lime-glass with SiO<(Index)2>, CaO, MgO and Na<(Index)2>O as main constituents; determination of SiO<(Index)2>
- DIN 38408-3:2011-04 German standard methods for the examination of water, waste water and sludge - Gaseous components (group G) - Part 3: Determination of ozone (G 3)
- DIN 51076-1:1991 Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials
- DIN EN ISO 6143:2006 Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); English version of DIN EN ISO 6143:2006-11
International Federation of Trucks and Engines, Composition Testing Standardization
Professional Standard - Petrochemical Industry, Composition Testing Standardization
- SH/T 3545-2011 Specification for NDT on pipelines in petrochemical industry
- SH/T 3545-2020 Non-destructive testing standards for petrochemical pipeline engineering
Shanxi Provincial Standard of the People's Republic of China, Composition Testing Standardization
- DB14/T 2499-2022 Guidelines for the management and application of reference materials for chemical testing by inspection and testing institutions
BR-ABNT, Composition Testing Standardization
SAE - SAE International, Composition Testing Standardization
- SAE J405-1989 Chemical Compositions of SAE Wrought Stainless Steels@ Standard
- SAE J405-2018 Chemical Compositions of SAE Wrought Stainless Steels@ Standard
Professional Standard - Ferrous Metallurgy, Composition Testing Standardization
- YB/T 9008-1998 Inspection - Acception Regulation and Quality Evaluation Standard of Engineering Survey
- YB/T 9008-1998(条文说明) Inspection - Acception Regulation and Quality Evaluation Standard of Engineering Survey(EXPLANATION)
ES-UNE, Composition Testing Standardization
- UNE-ISO 16128-2:2019 Cosmetics. Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products -- Part 2: Criteria for ingredients and products.
- UNE-ISO 16128-1:2019 Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and products -- Part 1: Definitions for ingredients
- UNE-CEN ISO/ASTM TR 52905:2023 Additive manufacturing of metals - Non-destructive testing and evaluation - Defect detection in parts (ISO/ASTM TR 52905:2023) (Endorsed by Asociación Española de Normalización in August of 2023.)
Korean Agency for Technology and Standards (KATS), Composition Testing Standardization
- KS B ISO 3452-3-2016(2021) Non－destructive testing－Penetrant testing－Part 3：Reference test blocks
- KS I ISO 6143:2008 Gas analysis-Comparison methods for determining and checking the composition of calibration gas mixtures
- KS I ISO 6143:2015 Gas analysis－Comparison methods for determining and checking the composition of calibration gas mixtures
- KS I ISO 6143-2015(2020) Gas analysis－Comparison methods for determining and checking the composition of calibration gas mixtures
- KS D 1920-2004 Standard test methods for chemical analysis of chromium and ferrochromium
Professional Standard - Chemical Industry, Composition Testing Standardization
- HG/T 20707-2014 Inspection and evaluation standard for achievements quality of chemical industry geotechnical investigation
IX-EU/EC, Composition Testing Standardization
- M 335-2003 STANDARDIZATION MANDATE ASSIGNED TO THE CEN CONCERNING THE MODERNISATION OF THE METHODS OF ANALYSIS OF FERTILIZERS
- M 389-2006 STANDARDISATION MANDATE ASSIGNED TO CEN CONCERNING METHODS FOR TESTING EFFICACY OF SUNSCREEN PRODUCTS
- M 402-2007 MANDATE FOR STANDARDISATION ADDRESSED TO CEN for METHODS OF ANALYSIS TO DETECT PERFLUOROOCTANE SULPHONATES IN PREPARATIONS, SEMIFINISHED PRODUCTS AND ARTICLES INCLUDING TEXTILE AND COATED MATERIALS.
- M 315-2001 MANDATE FOR STANDARDISATION ADDRESSED TO CEN in the field of METHODS OF ANALYSIS FOR ANIMAL FEEDINGSTUFFS
- M 382-2006 MANDATE FOR STANDARDISATION ADDRESSED TO CEN in the field of METHODS OF ANALYSIS FOR ANIMAL FEEDINGSTUFFS
- M 374-2005 MANDATE TO CEN AND CENELEC FOR STANDARDISATION IN THE FIELD OF MEASURING INSTRUMENTS
- M 316-2001 STANDARDISATION MANDATE TO CEN FOR STANDARD MEASURING METHODS OF BENZO(A)PYRENE IN AMBIENT AIR
- M 360-2004 STANDARDISATION MANDATE TO CEN FOR STANDARD MEASURING METHODS FOR THE DETERMINATION OF TOTAL GASEOUS MERCURY IN AMBIENT AIR AND THE TOTAL DEPOSITION OF MERCURY
- M 413-2007 STANDARDISATION MANDATE ADDRESSED TO CEN for METHODS OF ANALYSIS TO DETECT POLYCYCLIC AROMATIC HYDROCARBONS (PAH) IN EXTENDER OILS
- M 109-1996 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON FIRE ALARM/DETECTION, FIXED FIREFIGHTING, FIRE AND SMOKE CONTROL AND EXPLOSION SUPPRESSION PRODUCTS
- M 383-2006 MANDATE FOR STANDARDISATION ADDRESSED TO CEN in the field of METHODS OF ANALYSIS FOR MYCOTOXINS IN FOOD
- M 231-1995 MANDATE TO CEN/CENELEC FOR THE ELABORATION AND ADOPTION OF MEASUREMENT STANDARDS FOR BALLASTS FOR FLUORESCENT LAMPS
- M 257-1997 STANDARDISATION MANDATE TO CEN FOR STANDARD MEASURING METHODS OF BENZENE IN AMBIENT AIR
- M 286-1999 STANDARDISATION MANDATE TO CEN FOR STANDARD MEASUREMENT METHODS OF PM 2.5 IN AMBIENT AIR
- M 388-2006 Standardisation Mandate to CEN for Standard Measuring methods for the determination of dioxin-like PCBs from stationary sources
- M 258-1997 STANDARDISATION MANDATE TO CEN AND CENELEC FOR STANDARD MEASURING METHODS OF Pb, Cd, As, Ni IN AMBIENT AIR
- M 256-1997 DRAFT STANDARDISATION MANDATE TO CEN FOR STANDARD MEASURING METHODS OF SO2, NO2, CO, O3 IN AMBIENT AIR
- M 203-1995 MANDATE TO CEN/CENELEC FOR THE ELABORATION AND ADOPTION OF MEASUREMENT STANDARDS FOR HOUSEHOLD OVENS
- M 139 ADD-2001 ADDENDUM TO: MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONISED STANDARDS ON M109 - FIRE ALARM/DETECTION, FIXED FIREFIGHTING, FIRE AND SMOKE CONTROL AND EXPLOSION SUPPRESSION PRODUCTS
- M 356-2004 STANDARDISATION MANDATE TO CEN AND CENELEC FOR THE DEVELOPMENT OF AN EN GUIDANCE STANDARD CONCERNING A STAGED IMPLEMENTATION OF ENVIRONMENTAL MANAGEMENT SYSTEMS (EMS)
- M 267-1997 MANDATE TO CEN/CENELEC FOR THE ELABORATION AND ADOPTION OF STANDARDS FOR THE DESIGNATION OF OPERATIONAL MODES AND FOR THE MEASUREMENT METHOD FOR THE POWER CONSUMPTION OF AUDIO SYSTEMS
- M 202-1995 MANDATE TO CEN/CENELEC FOR THE ELABORATION AND ADOPTION OF MEASUREMENT STANDARDS FOR HOUSEHOLD LIGHT SOURCES
- M 268-1998 MANDATE TO CEN/CENELEC FOR THE ELABORATION AND ADOPTION OF STANDARDS FOR THE MEASUREMENT METHOD FOR THE DETERMINATION OF THE EFFICACY OF FLUORESCENT LIGHTING LUMINAIRES
- M 345-2004 STANDARDISATION MANDATE TO CEN FOR STANDARD MEASURING METHODS FOR THE DETERMINATION OF DEPOSITION OF HEAVY METALS EXCEPT MERCURY
- M 276-1998 STANDARDISATION MANDATE TO CEN FOR MANUAL REFERENCE METHODS FOR THE CALIBRATION OF AUTOMATED MEASUREMENT SYSTEMS FOR CARBON MONOXIDE (CO) EMISSIONS IN STACK
- M 278-1998 STANDARDISATION MANDATE TO CEN FOR MANUAL REFERENCE METHODS FOR THE CALIBRATION OF AUTOMATED MEASUREMENT SYSTEMS FOR SULPHUR DIOXIDE (SO2) AND NITROGEN OXIDES (NOX) EMISSIONS IN STACK
- M 244-1996 MANDATE TO CEN AND CENELEC FOR THE ELABORATION AND ADOPTION OF STANDARDS FOR TEST METHODS AND FOR THE MEASUREMENT, CALCULATION AND DESIGNATION OF EFFICIENCY OF GENERAL PURPOSE LOW VOLTAGE THREE PHASE INDUCTION ELECTRIC MOTORS
- M 274-1998 MANDATE TO CEN/CENELEC FOR THE ELABORATION AND ADOPTION OF STANDARDS FOR THE MEASUREMENT METHOD FOR THE DETERMINATION OF THE EFFICIENCY OF INDIVIDUAL AIR CONDITIONERS
Japanese Industrial Standards Committee (JISC), Composition Testing Standardization
- JIS Z 2345-4:2018 Standard test blocks for ultrasonic testing -- Part 4: Standard test blocks for angle beam ultrasonic testing
- JIS Z 2345-1:2018 Standard test blocks for ultrasonic testing -- Part 1: A1 Standard Test Block
- JIS Z 2345-2:2018 Standard test blocks for ultrasonic testing -- Part 2: A7963 Standard Test Block
- JIS Z 2343-3:2001 Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks
- JIS Z 2343-3:2017 Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks
- JIS Z 2324-1:2018 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 1: Standard test blocks
RU-GOST R, Composition Testing Standardization
- GOST 938.4-1970 Leather. Method of calculation of some chemical characteristics which are not determinated directly
- GOST R ISO 14284-2009 Steel and iron. Sampling and preparation of samples for determination of chemical composition
- GOST R 56512-2015 Non-destructive testing. Metod of magneting particle testing. Standard technological processes
- GOST 21397-1981 Non-destructive testing. Set of standard samples for ultrasonic testing semi-finished and aluminium alloy products. Specifications
- GOST R 57975.1-2017 Associated oil gas. Determination of composition by gas chromatography method. Part 1. Determination of hydrocarbons C1-C8+ and inorganic gases content by flame ionization detector and thermal conductivity detector
- GOST R 57975.2-2017 Associated oil gas. Determination of composition by gas chromatography. Part 2. Determination of sulfur compounds using flame photometric detector
- GOST 23433-1979 Fabrics of chemical fibres. Norms of colour fastness and methods for determination
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Composition Testing Standardization
- GB/T 15000.5-1994 Directives for the work of reference materiapls (5). Technologic rules for reference materials of chemical composition
- GB/T 7918.2-1987 Standard methods of microbiological examination for cosmetics--Standard plate count
- GB 7918.2-1987 Cosmetic microbiology standard test method for determination of total bacterial count
- GB/T 50493-2019 Petrochemical industry combustible gas and toxic gas detection alarm design standards
- GB 10628-1989 Gas analysis－Determination of composition of calibration gas mixtures－Comparison methods
- GB/T 10628-1989 Gas analysis--Determination of composition of calibration gas mixtures—Comparison methods
- GB/T 2481.2-2009 Bonded abrasives-Determination and designation of grain size distribution-Part2:Microgrits
- GB/T 22279-2008 Guide for development of certified reference materials for the composition analysis and the physical property measurements of coal
- GB/T 29164-2012 Guide for utilization of certified reference materials for composition analysis and physical property measurements of coal
- GB/T 26498-2011 Industrial automation systems and integration.Physical device control.Dimensional Measuring Interface Standard(DMIS)
国家市场监督管理总局、中国国家标准化管理委员会, Composition Testing Standardization
- GB/T 37665-2019 Non-destructive testing for chemical compositions of ancient ceramics—PIXE analysis technique standards
- GB/T 2481.2-2020 Bonded abrasives—Determination and designation of grain size distribution—Part 2:Microgrits
PT-IPQ, Composition Testing Standardization
- NP 97-1956
- NP 104-3-1988 Chemistry Layouts for standards Part 3: Standards for molecular absorption spectrometry
- NP 104-4-1988 Chemistry Layouts for standards Part 4: Standards for atomic absorption spectrometric analysis
Agricultural Standard of the People's Republic of China, Composition Testing Standardization
- 农业部2122号公告-1-2014 Detection of genetically modified animals and derived products.Target-taxon-specific qualitative PCR method for Sus scrofa
- 农业部2122号公告-2-2014 Detection of genetically modified animals and derived products.Target-taxon-specific qualitative PCR method for Ovis aries and Capra aegagrus hircus
- 农业部2259号公告-1-2015 Detection of genetically modified plants and derived products.Technical specification for certified value assessment of matrix reference materials
- 农业部1943号公告-1-2013 Detection of genetically modified plants and derived products.Target-taxon-specific qualitative PCR method for cotton
- 农业部2031号公告-8-2013 Detection of genetically modified plants and derived products.Target-taxon-specific qualitative PCR method for soybean
- 农业部1861号公告-3-2012 Detection of genetically modified plants and derived products.Target-taxon-specific qualitative PCR method for maize
- 农业部1782号公告-8-2012 Detection of genetically modified plants and derived products.Technical specification for manufacture of matrix reference material
- 农业部1861号公告-1-2012 Detection of genetically modified plants and derived products.Target-taxon-specific qualitative PCR method for rice
- 农业部2031号公告-9-2013 Detection of genetically modified plants and derived products.Target-taxon-specific qualitative PCR method for rapeseed
- 农业部1782号公告-9-2012 Detection of genetically modified plants and derived products.Technical specification for evaluation on reference material by ring trial
- 农业部2406号公告-7-2016 Detection of genetically modified animals and derived products.DNA extraction and purification
- 农业部1485号公告-4-2010 Detection of genetically modified plants and derived products.DNA extraction and purification
- 农业部1485号公告-19-2010 Detection of genetically modified plants and derived products.Method for identification of matrix reference material candidate
- 农业部2031号公告-10-2013 Detection of genetically modified plants and derived products.Target-taxon-specific qualitative PCR method for Triticum aestivum L.
- 农业部2031号公告-14-2013 Detection of genetically modified animals and derived products.Target-taxon-specific qualitative PCR method for Bos taurus
- 农业部2259号公告-2-2015 Detection of genetically modified plants and derived products.Technical specification for reproduction and identification of maize reference material candidate
- 农业部2259号公告-3-2015 Detection of genetically modified plants and derived products.Technical specification for reproduction and identification of cotton reference material candidate
国家能源局, Composition Testing Standardization
- NB/T 34057.2-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 2: Purification of standard samples
- NB/T 34057.1-2017 Determination of chemical composition of lignocellulosic biomass raw materials Part 1: Preparation of standard samples
Institute of Electrical and Electronics Engineers (IEEE), Composition Testing Standardization
- IEEE/ANSI N42.12-1980 American National Standard Calibration and Usage of Sodium Iodide Detector Systems
- ANSI Std N42.12-1980 American National Standard Calibration and Usage of Sodium Iodide Detector Systems
- NFPA (Fire) 720 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment, 2015 Edition
SE-SIS, Composition Testing Standardization
- SIS SS 11 03 32-1982 Hardness test - Brinell test - Direct verification of standardizing machine for calibration of standardized blocks
- SIS SS 11 03 31-1982 Hardness test - Brinell test - Indirect verification of testing machines using standardized blocks
CU-NC, Composition Testing Standardization
- NC 04-75-1986 Material Testing. Welding. Test Specimen Preparation and Sampling Selection for Chemical Composition Determination
- NC 90-20-10-1988 Standards System for Metrological Arsurance, Carbon Steel AC-AB 3-200. Composition Reference Standards Sampie for Chemical Analysis
- NC 12-01-13-1988 Standards System for Protection Against Corrosión. Determination of Nitrates Content in the Atmosphere. Method of Chemical Analysis
- NC 90-13-33-1986 Reference Standard Samples. Sulfidic Quartz Rock AA MPR of the Composition for Chemical Analysis
卫生健康委员会, Composition Testing Standardization
- WS 817-2023 Positron emission tomography (PET) equipment quality control testing standards
National Metrological Technical Specifications of the People's Republic of China, Composition Testing Standardization
- JJF 1711-2018 Calibration Specification for Sulfur Hexafluoride Decomposition Products Detectors
WRC - Welding Research Council, Composition Testing Standardization
- BULLETIN 235-1978 IMPROVED REPEATABILITY IN ULTRASONIC EXAMINATION ; ULTRASONIC TESTING SYSTEM STANDARDIZATION REQUIREMENTS
UNKNOWN, Composition Testing Standardization
Professional Standard - Agriculture, Composition Testing Standardization
- 农业部2630号公告-13-2017 Technical Specifications for Plasmid DNA Standard Substance Determination of Components of Transgenic Plants and Their Products
- 农业农村部公告第111号-1-2018 Technical specifications for the preparation of genomic DNA reference materials for the detection of components of transgenic plants and their products
- 农业农村部公告第111号-2-2018 Technical specifications for the determination of genomic DNA reference materials for the detection of components of genetically modified plants and their products
- KJ 201903 Rapid detection of barbiturates in health food by colloidal gold immunochromatography
Hebei Provincial Standard of the People's Republic of China, Composition Testing Standardization
- DB13/T 5189.2-2020 Detection of Hazardous Components in Natural Plant Extracts Part 2: Determination of Sulfur Dioxide
Lithuanian Standards Office , Composition Testing Standardization
- LST 0-6-2008+1K-2010 Standardization - Part 6: Taking over of the standards and other deliverables of European organizations for standardization at a national level
- LST 0-2-1-2015 Standardization - Part 2: Common rules for standardization work - Chapter 1: Drafting of purely Lithuanian Standards and other deliverables
- LST EN 573-5-2007 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
The American Road & Transportation Builders Association, Composition Testing Standardization
- AASHTO T219-1987 Standard Method of Test for Testing Lime for Chemical Constituents and Particle Sizes Twentieth Edition R(1999)
- AASHTO M 148-2001 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete HM-22: Part IA; Designation ASTM: C 309-97
Professional Standard - Railway, Composition Testing Standardization
- TB/T 3105.4-2014 Nondestructive testing of cast steel bolsters and side frames for railway freight car.Part 4:Digital radiography and industrial computed tomography testing
Professional Standard - Urban Construction, Composition Testing Standardization
- CJ 26.10-1991 Determination of standard sulfide in urban sewage water quality inspection method
- CJ 26.9-1991 Determination of Standard Cyanide in Municipal Sewage Water Quality Inspection Method
- CJ 26.24-1991 Municipal sewage water quality examination method standard chloride determination silver method
ZA-SANS, Composition Testing Standardization
- SANS 604:2007 Calibration in analytical chemistry and use of certified reference materials
Professional Standard - Electron, Composition Testing Standardization
IT-UNI, Composition Testing Standardization
中国人民银行, Composition Testing Standardization
- JR/T 0045.3-2014 China Financial Integrated Circuit (IC) Card Testing Specifications Part 3: Personalized Testing Specifications for Debit/Credit Applications
International Electrotechnical Commission (IEC), Composition Testing Standardization
- IEC TR 63072-1:2017 Photonic integrated circuits - Part 1: Introduction and roadmap for standardization
UY-UNIT, Composition Testing Standardization
Professional Standard - Recommended Standards for Engineering Construction, Composition Testing Standardization
- CECS 70-1994 STANDARD OF INSPECTION AND MEASUREMENT OF RAY PHOTOGRAPHING FOR METAL MELTING MELD SEAM OF BUILDING INSTALLATION ENGINEERING
工业和信息化部/国家能源局, Composition Testing Standardization
- JB/T 10231.8-2016 Standard testing methods for cutting tool products Part 8: Dies
- JB/T 10231.7-2016 Standard testing methods for cutting tool products Part 7: Round broaches
- JB/T 10231.6-2016 Standard testing methods for cutting tool products Part 6: Gear shaping cutters
- JB/T 10231.5-2016 Standard testing methods for cutting tool products Part 5: Gear hobs
VE-FONDONORMA, Composition Testing Standardization
Professional Standard - Commodity Inspection, Composition Testing Standardization
- SN/T 2051-2008 Determination of bovine,ovine,porcine-derived materials in food,cosmetic and feed.Real-time PCR method
- SN/T 0541.3-1996 Inspecting method for import and export standard rubber.Determination of ash content
Society of Automotive Engineers (SAE), Composition Testing Standardization
- SAE AS5127/1B-2009 Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds
KE-KEBS, Composition Testing Standardization
ES-AENOR, Composition Testing Standardization
- UNE 68-100-1991 Agricultural machinery. Walking tractors and motorhoes. Axle power determination and standardized test for fuel consumption
National Fire Protection Association (NFPA), Composition Testing Standardization
- NFPA 720-2009 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment Effective Date: 10/10/2008
- NFPA 720-2015 Standard for the Installation of Carbon Monoxide (CO) Detection and Warning Equipment (Effective Date: 9/3/2014)
AENOR, Composition Testing Standardization
- UNE-EN 573-5:2008 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
GOSTR, Composition Testing Standardization
- GOST R 59052-2020 Industrial automation systems and integration. Standardized procedures for production systems engineering. Part 1. Overview
Professional Standard-Ships, Composition Testing Standardization
- CB/T 3243.6-1995 Management of ship product drawings and technical documents Part 6: Standardized inspection
Standard Association of Australia （SAA）, Composition Testing Standardization
- AS ISO 22093:2004 Industrial automation systems and integration - Physical device control - Dimensional Measuring Interface Standard (DMIS)