ZH
RU
ES

What are the measurement standards

What are the measurement standards, Total:346 items.

In the international standard classification, What are the measurement standards involves: Non-destructive testing, Vocabularies, Radiation measurements, Road vehicles in general, Electromagnetic compatibility (EMC), Thermodynamics and temperature measurements, Surface treatment and coating, Crude petroleum, Powder metallurgy, Products of the chemical industry, Products of the textile industry, Soil quality. Pedology, Protection against fire, General methods of tests and analysis for food products, Organic chemicals, Alarm and warning systems, Quantities and units, Character symbols, Medical equipment, Mechanical testing, Fertilizers, Air quality, Insulating materials, CHEMICAL TECHNOLOGY, Optics and optical measurements, Measurement of fluid flow, Quality, Microprocessor systems, Non-textile floor coverings, Textile fibres, Paints and varnishes, Analytical chemistry, Acoustics and acoustic measurements, Freight distribution of goods, Microbiology, Water quality, Inorganic chemicals, Metalliferous minerals, Agricultural machines, implements and equipment, Electrical accessories, Fuels, Metrology and measurement in general, Laboratory medicine, Earthworks. Excavations. Foundation construction. Underground works, SHIPBUILDING AND MARINE STRUCTURES, Plastics, Graphic technology, Footwear, Protective equipment, Electricity. Magnetism. Electrical and magnetic measurements, Open systems interconnection (OSI), Installations in buildings, Solar energy engineering, Audio, video and audiovisual engineering, Nuclear energy engineering, Cereals, pulses and derived products, Lubricants, industrial oils and related products, Fibre optic communications, Road vehicle systems, Pesticides and other agrochemicals.

US-CFR-file, What are the measurement standards

CFR 40-60.5413-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5413:What are the performance testing procedures for control devices used to demonstrate compliance at my storage vessel or centrifugal compressor affected fa
CFR 40-63.144-2014 Protection of Environment. Part63:National emission standards for hazardous air pollutants for source categories. Section63.144:Process wastewater provisions—test methods and procedures for determining applicability and Group 1/Group 2 determinations (det

American Society for Testing and Materials (ASTM), What are the measurement standards

ASTM E1324-11 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
ASTM E1324-00 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination Instruments
ASTM E1324-21 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
ASTM E170-14a Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-15a Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E170-99e1 Standard Terminology Relating to Radiation Measurements and Dosimetry
ASTM E2253-03 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E2253-08e1 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
ASTM E191-64(2005) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM E191-64(2011) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM D1212-91(2001) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D1212-91(1996)e1 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D1212-91(2020) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D1212-91 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D4929-99 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-04 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-15a Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D1212-91(2013) Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D1212-91(2007)e1 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D5861-95(2002) Standard Guide for Significance of Particle Size Measurements of Coating Powders
ASTM E299-17 Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
ASTM D5994/D5994M-10(2021) Standard Test Method for Measuring Core Thickness of Textured Geomembranes
ASTM E299-17a Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
ASTM D5861-07(2013) Standard Guide for Significance of Particle Size Measurements of Coating Powders
ASTM D5994/D5994M-10(2015)e1 Standard Test Method for Measuring Core Thickness of Textured Geomembranes
ASTM D4490-96 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D4929-19a Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-99e1 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM E800-99 Standard Guide for Measurement of Gases Present or Generated During Fires
ASTM E800-01 Standard Guide for Measurement of Gases Present or Generated During Fires
ASTM D4929-19 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM E3083-17 Standard Terminology Relating to Radiation Processing: Dosimetry and Applications
ASTM D4929-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-07(2014) Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-16 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-15 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D5352-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D5352-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D5352-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D1005-95 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D1005-95(2020) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM E800-14 Standard Guide for Measurement of Gases Present or Generated During Fires
ASTM D7466/D7466M-10(2015)e1 Standard Test Method for Measuring Asperity Height of Textured Geomembranes
ASTM D4929-07 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D4490-96(2006)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes
ASTM D1005-95(2001) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM E800-07 Standard Guide for Measurement of Gases Present or Generated During Fires
ASTM D1005-95(2007) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM F2079-09(2013) Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
ASTM D6991-17(2022) Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM D5350-95 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM D5350-95(2001) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM D5350-95(2006) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
ASTM E289-17 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM D6991-05(2010) Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM D2974-20 Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils
ASTM D2974-20e1 Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils
ASTM D4599-97 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM C1616-07e1 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM C1616-07 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM D459-08 Standard Terminology Relating to Soaps and Other Detergents
ASTM D459-08a Standard Terminology Relating to Soaps and Other Detergents
ASTM C1616-07(2012) Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM D6991-17 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM E2222-02 Standard Practice for Host Computer Communication with Spectrometers for Color Measurements
ASTM F2079-02(2008) Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
ASTM D5089-95(2008) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM D6991-05 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM F2079-09(2022) Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
ASTM D8150-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D6991-17e1 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
ASTM E2222-02(2007) Standard Practice for Host Computer Communication with Spectrometers for Color Measurements
ASTM D1005-95(2013) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D5280-96(2021) Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM F457-04 Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
ASTM F457-04(2010) Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
ASTM D4599-20 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D4599-21 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM F387-93 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
ASTM F387-02 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM D6053-00 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
ASTM F387-17(2022) Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM C458/C458M-98(2019) Standard Test Method for Organic Fiber Content of Asbestos-Cement Products (Withdrawn 2022)
ASTM D1770-94(2006) Standard Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top
ASTM D5125-97 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM D5125-97(2005) Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM F387-02(2008) Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM F387-11 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM E2194-14 Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials
ASTM E2403-23 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2903-18 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
ASTM D6053-08 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
ASTM D6053-03 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
ASTM C1616-07(2018) Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
ASTM D6053-14(2018) Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes
ASTM E2963-22 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments
ASTM D7504-23 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D4599-03 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D5116-06 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
ASTM D5094-04 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
ASTM D5116-97 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
ASTM D7504-20 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-17 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM E1706-05(2010) Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
ASTM D7504-21 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-17a Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D5179-16(2021) Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM E2896-12 Standard Test Method for Quantitative Petri Plate Method (QPM) for Determining the Effectiveness of Antimicrobial Towelettes
ASTM D4599-14 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D4599-03(2009)e1 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters
ASTM D7504-16 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-09 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D4129-05 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
ASTM D4129-05(2012) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
ASTM D4129-05(2013) Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection
ASTM E2971-16(2020) Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM D3960-01 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D3960-04 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM E256-98 Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
ASTM D3960-98 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM E256-98(2003)e1 Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
ASTM E738-00 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by Complexometric Titration
ASTM E2403-04 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM D5093-02 Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
ASTM E2403-06 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E257-98 Standard Test Method for Sulfur in Organic Compounds by Sodium Peroxide Bomb Ignition
ASTM E738-00(2005) Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by Complexometric Titration
ASTM D3960-02 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM E257-98(2003)e1 Standard Test Method for Sulfur in Organic Compounds by Sodium Peroxide Bomb Ignition
ASTM E256-09 Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition
ASTM E2903-13 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
ASTM D3960-05(2018) Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM E2403-06(2012) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM D3960-05 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D3960-05(2013) Standard Practice for Determining Volatile Organic Compound lpar;VOCrpar; Content of Paints and Related Coatings
ASTM E1195-01(2008) Standard Test Method for Determining a Sorption Constant (K_oc) for an Organic Chemical in Soil and Sediments
ASTM D6053-14 Standard Test Method for Determination of Volatile Organic Compound 40;VOC41; Content of Electrical Insulating Varnishes
ASTM D5179-16 Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D5093-02(2008) Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D6132-13(2022) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D6132-13(2017) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM E258-67(2002) Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method
ASTM E1706-05 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
ASTM E1064-00 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM E1064-08 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM E1706-05e1 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
ASTM C1649-14(2021) Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
ASTM D1997-20 Standard Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass
ASTM D1400-00 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base
ASTM D7875-14 Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography
ASTM E1064-04 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D2908-91(2001) Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
ASTM D5812-96(2002)e1 Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography
ASTM D5812-96 Standard Test Method for Determination of Organochlorine Pesticides in Water by Capillary Column Gas Chromatography
ASTM D5195-02 Standard Test Method for Density of Soil and Rock In-Place at Depths Below the Surface by Nuclear Methods
ASTM D5195-91(1996) Standard Test Method for Density of Soil and Rock In-Place at Depths Below the Surface by Nuclear Methods
ASTM D5352-95(2012) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D7504-18 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM E2971-14 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM E2971-16 Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements
ASTM B934-21 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
ASTM D4128-06 Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
ASTM D4128-94 Standard Practice for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
ASTM D5175-91(2011) Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
ASTM B934-04a Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
ASTM B934-04 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
ASTM E246-01 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titration
ASTM E246-95 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titration
ASTM E246-01(2005) Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titration
ASTM D2908-91(2011) Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography
ASTM D7504-11 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7504-12 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM E1367-03(2014) Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
ASTM D7504-15 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D2908-91(2017) Standard Practice for Measurement of Volatile Organic Compounds in Water by Water Jet Gas Chromatography
ASTM D290-91a Standard Practice for Measurement of Volatile Organic Compounds in Water by Water Jet Gas Chromatography
ASTM D8150-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D5507-21 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
ASTM D5507-21a Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
ASTM D6132-13 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D6956-03 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM D5790-95(2001) Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM D5790-95 Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM F2495-05 Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment
ASTM F695-96 Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, or Related Materials
ASTM F695-01 Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials
ASTM D5790-95(2006) Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM D5285-03 Standard Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments
ASTM E1064-12 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
ASTM D5895-01 Standard Test Methods for Measuring Times of Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
ASTM D5790-18 Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM D5895-20 Standard Test Methods for Measuring Times of Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
ASTM F695-01(2009) Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials
ASTM C1649-14 Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
ASTM D7504-15e1 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D7382-07 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
ASTM B934-15 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (PM) Parts Using Microindentation Hardness Measurements
ASTM F1930-00 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin
ASTM D6132-04 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage
ASTM D6132-97 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Over Concrete Using an Ultrasonic Gage
ASTM D5895-01e1 Standard Test Methods for Measuring Times of Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
ASTM D5895-96 Standard Test Methods for Measuring Times of Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
ASTM B934-10 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements
ASTM D7768-12(2018) Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
ASTM D6132-08 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage
ASTM D5790-95(2012) Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry
ASTM D5220/D5220M-21 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM D5220-14 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM F1769-97 Standard Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector (Withdrawn 2004)
ASTM D5507-99 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
ASTM D5507-99(2008)e1 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
ASTM D5507-99(2012) Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
ASTM E2963-14 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments
ASTM D7768-12 Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
ASTM D7911-19 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
ASTM F2495-05(2011) Standard Test Method for Determining Energy Consumption of MFDs with Copying Capability and Similar Office Imaging Equipment
ASTM C1204-14 Standard Test Method for Uranium in Presence of Plutonium by Iron40;II41; Reduction in Phosphoric Acid Followed by Chromium40;VI41; Titration
ASTM D7911-14 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
ASTM D5087-91(1994) Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D5087-02 Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D5087-02(2008) Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D6886-03(2009) Standard Test Method for Speciation of the Volatile Organic Compounds (VOCs) in Low VOC Content Waterborne Air-Dry Coatings by Gas Chromatograpy
ASTM D7041-04 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
ASTM D6886-18 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
ASTM D7419-07 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
ASTM D6113-11 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
ASTM D6029-96(2004) Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
ASTM D6029-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
ASTM D5904-96 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D5904-02 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D7041-04(2010)e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
ASTM D6266-00a(2017) Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D6266-00a(2023) Standard Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
ASTM D5904-02(2009) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
ASTM D8316-20 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine
ASTM D6886-14e1 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
ASTM D8316-20a Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine
ASTM D5087-02(2014) Standard Test Method for Determining Amount of Volatile Organic Compound 40;VOC41; Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device 40;Abatement41;

Consumer Electronics Association （U.S.), What are the measurement standards

CEA-2010-A-2012 Standard Method of Measurement for Powered Subwoofers

SE-SIS, What are the measurement standards

SIS SEN 24 06 00-1975 Insulators. Survey of standards. International recommendations' validity as Swedish standard
SIS SEN 31 00 00-1975 Lighting equipment. Survey of standards. International recommendations' validity as Swedish standard
SIS SEN 43 30 00-1974 Printed circuits. Survey of standards. International recommendations' validity as Swedish standard
SIS SEN 43 32 00-1973 Semiconductor devices. Survey of standards. International recommendations' validity as Swedish standard
SIS SEN 47 10 00-1976 Radio interference. Survey of standards. International recommendations' validity as Swedish standard
SIS SS 428 04 00-1978 Valve type surge arresters - Survey of standards - International standard's validity as Swedish standard
SIS SEN 36 04 00-1972 Electrical equipment of machine tools. Survey of standards. International recommendations' validity as Swedish Standard
SIS SEN 43 71 00-1975 Magnetic materials and components. Survey of standards. International recommendations' validity as Swedish standard
SIS SS 426 01 00-1980 Rotating electrical machinery — Survey of standards — International standards' validity as Swedish standard
SIS SEN 47 01 00-1973 Radio transmitters. Survey of standards. International recommendations' validity as Swedish standard
SIS SS 424 16 50-1979 Telesignal wires and cables — Survey of standards — International standards' validity as Swedish standard
SIS SEN 43 04 00-1971 Fixed capacitors for electronic equipment. Survey of standards. International recommendations'validity as Swedish standard
SIS SS 436 14 10-1982 Electrical safety of data processing equipment — Survey of standards — International standards' validity as Swedish standard
SIS SS 428 06 00-1984 Switching devices for max 1 kV — Survey of standards — Internatonal standards' validity as Swedish standard
SIS SS 436 14 00-1980 Electrical safety of data processing equipment — Survey of standards — International standards' validity as Swedish standard
SIS SEN 32 01 00-1971 Vacuum cleaners. Methods for measuring performance. International recommendation's validity as Swedish Standard
SIS SS 436 21 00-1983 Low-voltage switchgear and controlgear assemblies - Survey of standards - International standards' validity as Swedish standard
SIS SS 02 52 54-1980 Building acoustics — Measurement of sound insulation in buildings and of building elements — International standard's validity as Swedish Standard

The American Road & Transportation Builders Association, What are the measurement standards

AASHTO T 267-1986 Standard Method of Test for Determination of Organic Content in Soils by Loss on Ignition

Institute of Electrical and Electronics Engineers (IEEE), What are the measurement standards

IEEE 299-1997 Standard method for measuring the effectiveness of electromagnetic shielding enclosures
IEEE 299-1991 IEEE Standard for Measuring the Effectiveness of Electromagnetic Shielding Enclosures
IEEE Std 299-1991 IEEE Standard for Measuring the Effectiveness of Electromagnetic Shielding Enclosures
IEEE Std 260.1-2004 IEEE Standard Letter Symbols for Units of Measurement (SI Customary Inch-Pound Units, and Certain Other Units)
IEEE Std 299-1997 IEEE Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures
IEEE 260-1978 IEEE Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE Std P299/D13, Sep 2005 Approved Draft IEEE Standard for Measuring the Effectiveness of the Electromagnetic Shielding Enclosure
IEEE P260.1/D20, May 2023 IEEE Draft Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
P260.1/D19, February 2023 IEEE Draft Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE P260.1/D18, August 2022 IEEE Draft Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE P260.1 IEEE Draft Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE P260.1/D19, February 2023 IEEE Draft Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
IEEE Std P299/D13 Unapproved Draft IEEE Standard for Measuring the Effectiveness of the Electromagnetic Shielding Enclosure (Revision of IEEE 299-1997)
IEEE 1848-2020 IEEE Standard for Techniques and Measurement to Manage Functional Safety and Other Risks with Regards to Electromagnetic Disturbances
IEEE Std 1848-2020 IEEE Standard for Techniques and Measurement to Manage Functional Safety and Other Risks with Regards to Electromagnetic Disturbances
IEEE Std P299/D5 Unapproved Draft IEEE Standard for Measuring the Effectiveness of the Electromagnetic Shielding Enclosure (Revision of IEEE 299-1997) Superseded by P299/D12
IEEE 299.1-2013 IEEE Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m
IEEE Std P299/D12 Unpproved Draft IEEE Standard for Measuring the Effectiveness of the Electromagnetic Shielding Enclosure (Revision of IEEE 299-1997) Superseded by P299/D123
IEEE P299.1/D7, July19, 2013 IEEE Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m
IEEE Std 299.1-2013 IEEE Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m
IEEE P299.1/D6, July 2013 IEEE Draft Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having All Dimensions between 0.1 m and 2 m
IEEE P299.1/D4, March 19, 2011 IEEE Draft Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having All Dimensions between 0.1 m and 2 m

Korean Agency for Technology and Standards (KATS), What are the measurement standards

KS F 2104-2013(2018) Standard test method of organic matter contents in soils by ignition loss
KS D 0287-2005 Standard test method for determining the effective elastic parameter for X-ray diffraction measurements of residual stress
KS C IEC 60904-3:2010 Photovoltaic devices-Part 3:Measurement principles for terrestrial photovoltaic(PV) solar vices with reference spectral irradiance data

National Health Commission of the People's Republic of China, What are the measurement standards

GB 5009.215-2016 National Food Safety Standards Determination of Organotin Content in Food
GB 23200.116-2019 National Food Safety Standard for the Determination of 90 Organophosphorus Pesticides and Their Metabolite Residues in Plant-derived Foods by Gas Chromatography

UY-UNIT, What are the measurement standards

NORMA 49-P-1947

Professional Standard - Non-ferrous Metal, What are the measurement standards

YS/T 114-1992 Acceptance standard for energy balance and electric energy balance test of non-ferrous metal enterprises

中国有色金属工业总公司, What are the measurement standards

YS 114-1992 Energy balance and electric energy balance test acceptance standards for non-ferrous metal enterprises

American National Standards Institute （ANSI), What are the measurement standards

ANSI/IEEE 260.1:2004 Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)

PL-PKN, What are the measurement standards

PN C81549-01-1986 Paints and varnishes Determination of toxic metals content General, scope of the standard
PN-EN ISO 6647-2-2021-02 E Rice - Determination of amylose content - Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards (ISO 6647-2:2020)

RU-GOST R, What are the measurement standards

GOST 12.1.016-1979 Occupational safety standards system. Working zone air. Requirements for measurement techniques of unhealthy matters concentrations
GOST 27915-1988 Single input energizing quantity measuring relays with non-specified time or wiht independent specified time
GOST R 8.926-2016 State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with halocarbons. Procedure of determining the metrological characteristics
GOST R ISO 15194-2013 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation
GOST R 8.919-2016 State system for ensuring the uniformity of measurements. Reference systems for certification reference materials composition of magistral natural gas and substitute natural gas. The method of verification
GOST R 8.921-2016 State system for ensuring the uniformity of measurements. Certified reference materials of natural gas magistral and substitute natural gas. Procedure of determining the metrological characteristics
GOST R 55542-2013 System of national standards for quality of telecommunication services. Management of quality communications services. Monitoring of quality communications services
GOST 12.1.014-1984 Occupational safety standards sytem. Air in the zone of operation. Method of measuring unhealthy matters concentration using indicator tubes
GOST R 8.925-2016 State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Hydrogen, Nitrogen, Oxygen, Carbon Oxide, Carbon Dioxide, Methane, Propane, Hexane. Procedure of determining the metrological characteristics
GOST R 8.920-2016 State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Nitrogen oxide, Nitrogen dioxide, Hydrogen sulfide, Sulfur dioxide, Ammonia. Procedure of determining the metrological characteristics

Shanxi Provincial Standard of the People's Republic of China, What are the measurement standards

DB14/T 1981-2020 Internal quality control reference material control method for the validity of test results

AASHTO - American Association of State Highway and Transportation Officials, What are the measurement standards

T267-1986 Standard Method of Test for Determination of Organic Content in Soils by Loss on Ignition
T 267-1986 Standard Method of Test for Determination of Organic Content in Soils by Loss on Ignition

KR-KS, What are the measurement standards

KS F 2104-2013(2023) Standard test method of organic matter contents in soils by ignition loss

IX-EU/EC, What are the measurement standards

M 074-1994 MANDATE TO CEN/CENELEC FOR THE ELABORATION OF A PROGRAMME FOR MEASUREMENT STANDARDS FOR CERTAIN TYPE OF HOUSEHOLD APPLIANCES
COM(93) 218-1993 Proposal for a Council Decision on Common Rules and Standards for Ship Inspection and Survey Organisations
M 296-1999 MANDATE TO CEN/CENELEC FOR THE REVISION AND EXTENSION OF THE EN 50294 STANDARD “MEASUREMENT METHODS OF TOTAL INPUT POWER OF BALLAST-LAMP CIRCUIT”

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, What are the measurement standards

GB/T 27408-2010 Quality control in laboratories.Evaluating validity of non-standard test method.Practice for a linear relationship

Acoustical Society of America (ASA), What are the measurement standards

ASA S12.9 PART 3-2013 American National Standard Quantities and Procedures for Description and Measurement of Environmental Sound - Part 3: Short-term Measurements with an Observer Present
ASA S12.9 PART 7-2016 American National Standard Quantities and Procedures for Description and Measurement of Environmental Sound, Part 7: Measurement of Low-frequency Noise and Infrasound Outdoors in the Presence of Wind and Indoors in Occupied Spaces

Association Francaise de Normalisation, What are the measurement standards

FD X07-021:1999 Fundamental standards - Metrology and application of the statistics - Help to the process for the estimation and the use of the measurement and test results uncertainty
NF V03-734-2*NF EN ISO 6647-2:2020 Rice - Determination of amylose content - Part 2 : spectrophotometric routine method without defatting procedure and with calibration from rice standards
NF EN IEC 61326-2-3:2021 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 2-3 : exigences particulières - Configurations d'essai, conditions de fonctionnement et critères de performance des transducteurs avec un système ...
NF C99-117/A1*NF EN 50413/A1:2014 Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
NF C91-013:1991 Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment.
NF EN ISO 21253-2:2019 Qualité de l'eau - Méthodes d'analyse de composés multi-classes - Partie 2 : critères pour la détermination quantitative de composés organiques avec une méthode d'analyse de composés multi-classes
NF T90-253-2*NF EN ISO 21253-2:2019 Water quality - Multi-compound class methods - Part 2 : criteria for the quantitative determination of organic substances using a multi-compound class analytical method
NF EN IEC 61326-2-1:2021 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 2-1 : exigences particulières - Configurations d'essai, conditions fonctionnelles et critères de performance pour essai de sensibilité et matérie...
NF EN IEC 61326-2-2:2021 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 2-2 : exigences particulières - Configurations d'essai, conditions de fonctionnement et critères de performance des matériels portables d'essai, ...

International Telecommunication Union (ITU), What are the measurement standards

ITU-R BT.1683-2004 Objective perceptual video quality measurement techniques for standard definition digital broadcast television in the presence of a full reference

NZ-SNZ, What are the measurement standards

NZS 4402.3.1.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 3.1: Soil Chemical Tests - Determination of the Organic Matter Content Test 3.1.1: Standard Method by Titration

GOSTR, What are the measurement standards

GOST R 8.976-2019 State system for ensuring the uniformity of measurements. Certified reference materials of composition of gas mixtures. General specifications

British Standards Institution (BSI), What are the measurement standards

FD X07-021-1999 Fundamental standards - Metrology and application of the statistics - Help to the process for the estimation and the use of the measurement and test results uncertainty.
BS EN ISO 21253-2:2019 Water quality. Multi-compound class methods - Criteria for the quantitative determination of organic substances using a multi-compound class analytical method

未注明发布机构, What are the measurement standards

BS EN ISO 15194:2009(2016) In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for certified reference materials and the content of supporting documentation

Professional Standard - Agriculture, What are the measurement standards

GB 31656.8-2021 National Food Safety Standard for the Determination of Organophosphorus Drug Residues in Aquatic Products by Liquid Chromatography-Tandem Mass Spectrometry

International Electrotechnical Commission (IEC), What are the measurement standards

IEC 62055-52:2008 Electricity metering - Payment systems - Part 52: Standard transfer specification (STS) - Physical layer protocol for a two-way virtual token carrier for direct local connection
IEC 60904-3:1989 Photovoltaic devices; part 3: measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
IEC 60904-3:2008 Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data

European Committee for Standardization (CEN), What are the measurement standards

EN ISO 21253-2:2019 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)

International Organization for Standardization (ISO), What are the measurement standards

ISO 21253-2:2019 Water quality — Multi-compound class methods — Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method

German Institute for Standardization, What are the measurement standards

DIN EN ISO 21253-2:2022-12 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019); German version EN ISO 21253-2:2019
DIN 38414-19:1999 German standard methods for the examination of water, waste water and sludge - Sludge and sediments (group S) - Part 19: Determination of the steam-volatile organic acids (S 19)

ES-UNE, What are the measurement standards

UNE-EN ISO 21253-2:2020 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)
UNE-EN IEC 61326-2-5:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC ...

CH-SNV, What are the measurement standards

SN EN ISO 6647-2:2021 Rice - Determination of amylose content - Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards (ISO 6647-2:2020)

Lithuanian Standards Office , What are the measurement standards

LST EN ISO 6647-2:2020 Rice - Determination of amylose content - Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards (ISO 6647-2:2020)

DE-VDA, What are the measurement standards

VDA 276-2005 Determination of organic substances as emitted from automotive interior products using a 1 m3 test cabinet - Part 1: Standard-Emission - Part 2: Determination of the release of formaldehyde, ammoniak and phenole; Measurement by method of steady state conc
VDA 276-2000 Determination of organic substances as emitted from automotive interior products using a 1 m3 test cabinet - Part 1: Standard-Emission - Part 2: Determination of the release of formaldehyde, ammoniak and phenole; Measurement by method of steady state conc

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., What are the measurement standards

ASHRAE 41.2-1987 Standard Methods for Laboratory Air Flow Measurement; (Reaffirmation of ANSI/ASHRAE 41.2-1987 with Minor Editorial Changes) (R 1992) Errata Sheet No. 1 March 11@ 1993

Japanese Industrial Standards Committee (JISC), What are the measurement standards

JIS K 5601-5-2:2008 Testing methods for paint components -- Part 5: Determination of volatile organic compound (VOC) content in paints -- Section 2: Water-based paints (Multiple standard addition method)

Underwriters Laboratories (UL), What are the measurement standards

UL 61010-2-030 BULLETIN-2018 UL Standard for Safety Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-030: Particular Requirements for Equipment Having Testing or Measuring Circuits (COMMENTS DUE: OCTOBER 15@ 2018)