ZH
RU
ES
DC Contactor Country
DC Contactor Country, Total:69 items.
In the international standard classification, DC Contactor Country involves: Switchgear and controlgear, Electrical accessories, Shipbuilding and marine structures in general, Electric traction equipment, Energy and heat transfer engineering in general, Electricity. Magnetism. Electrical and magnetic measurements, Components and accessories for telecommunications equipment, Telecommunication systems, Metrology and measurement in general, Aerospace electric equipment and systems, Electric road vehicles, Road vehicle systems, Installations in buildings.
Group Standards of the People's Republic of China, DC Contactor Country
Professional Standard - Railway, DC Contactor Country
国家能源局, DC Contactor Country
Professional Standard - Machinery, DC Contactor Country
- JB/T 11309-2013 Technical condition of traction D.C. electro-pneumatic contactor & electromagnetic contactor
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, DC Contactor Country
- GB 21518-2008(XG1-2008) Amendment No. 1 to the national standard "Energy Efficiency Allowable Values and Energy Efficiency Levels of AC Contactors"
- GB 21518-2008/XG1-2008 Amendment No. 1 to the national standard "Energy Efficiency Allowable Values and Energy Efficiency Levels of AC Contactors"
Institute of Electrical and Electronics Engineers (IEEE), DC Contactor Country
- ANSI C37.17-1997 American National Standard for Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers
- ANSI C37.17-1972 American National Standard for Trip Devices for AC and General Purpose DC low-voltage power circuit breakers
- IEEE/ANSI C37.17-1997 American National Standard for Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers
- IEEE P1627/D1.5, March 2012 IEEE Draft Standard for Grounding Practices for dc Electrification Overhead Contact Systems, Including Application of Lightning Arresters, for Transit Systems
United States Navy, DC Contactor Country
- NAVY QPL-2212-QPD-2012 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
- NAVY QPL-2212-QPD-2010 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
- NAVY QPL-2212-2010 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
- NAVY QPL-2212-QPD-2011 CONTACTORS AND CONTROLLERS, ELECTRIC MOTOR AC OR DC, AND ASSOCIATED SWITCHING DEVICES
- NAVY QPL-2212-2012 Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices
- NAVY QPL-2212-2013 Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices
Association Francaise de Normalisation, DC Contactor Country
- NF L54-555:1979 Connecteurs d'aérodrome avec contacts mâles de diamètres 11 mm - 28 volts - Tension continue
- NF L58-100-306*NF EN 2349-306:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 306 : overload d.c. and a.c.
- NF EN 2349-306:2007 Série aérospatiale - Exigences et méthodes d'essais des relais et contacteurs - Partie 306 : surcharges courant continu et alternatif
- NF C63-396-3*NF EN 62196-3:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3 : dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
- NF C99-133-1*NF EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1 : requirements for measuring instruments
AR-IRAM, DC Contactor Country
RU-GOST R, DC Contactor Country
- GOST 8.022-1991 State system for ensuring the uniformity of measurements. State primary standard and state verification schedule for measuring instruments of direct current strength over range from 1·10 in minus 16 degree up to 30A
- GOST R 8.687-2009 State system for ensuring the uniformity of measurements. D. C. measuring voltage dividers. Verification methods
- GOST 8.027-2001 State system for ensuring the uniformity of measurements. State verification schedule for measuring instruments of direct electrical vortage and electromotive force
- GOST 8.027-1989 State system for ensuring the uniformity of measuremente. State primary standard and state verification schedule for measuring instruments of electromotive force and direct current
- GOST 8.278-2013 State system for ensuring the uniformity of measurements. D. c. measuring voltage dividers. Verification methods
- GOST 8.278-1978 State system for ensuring the uniformity of measurements. D.C. Measuring voltaqe dividers. Methods and means of verification
- GOST R 8.867-2014 State system for ensuring the uniformity of measurement. Measuring instruments of direct current in range from 1·10 v stepeni -15 to 1·10 v stepeni -9 A. Verification procedure
American National Standards Institute （ANSI), DC Contactor Country
- ANSI/SCTE 103-2012 Test Method for DC Contact Resistance, Drop cable to ôF connectors and F 81 Barrels
British Standards Institution (BSI), DC Contactor Country
- BS 6328-3:1983 Apparatus for connection to private circuits run by certain public telecommunication operators - Specification for apparatus for connection to direct current circuits
- BS EN 2349-306:2007 Aerospace series - Requirements and test procedures for relays and contactors - Overload d.c and a.c
- BS EN 2349-306:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
- BS 5424-3:1988 Specification for controlgear for voltages up to and including 1000 V a.c. and 1200 V d.c.. Additional requirements for contactors subject to certification
- BS EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings. Requirements for measuring instruments
- 18/30356862 DC BS EN 62196-3. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 3. Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
- 19/30395303 DC BS EN 62196-3. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 3. Dimensional compatibility and interchangeability requirements for DC and AC/DC pin and contact-tube vehicle couplers
- BS EN IEC 62196-6:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles - Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where…
European Committee for Standardization (CEN), DC Contactor Country
- prEN 525-1991 Requirements for non-domestic direct gas-fired convection air heaters for space heating
- EN 2349-306:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
Korean Agency for Technology and Standards (KATS), DC Contactor Country
- KS C IEC 62019:2003 Electrical accessories－Circuit－breakers and similar equipment for household use－Auxiliary contact units
- KS R IEC 62196-3-2017(2022) Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. p
NEMA - National Electrical Manufacturers Association, DC Contactor Country
- NEMA ICS 2-1993 Industrial Control and Systems Controllers@ Contactors@ and Overload Relays Rated Not More Than 2000 Volts AC or 750 Volts DC
Danish Standards Foundation, DC Contactor Country
- DS/EN 2349-306:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
Lithuanian Standards Office , DC Contactor Country
- LST EN 2349-306-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.
German Institute for Standardization, DC Contactor Country
- DIN EN 2349-306:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006
- DIN EN 2349-306:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c.; German and English version EN 2349-306:2006
- DIN 89266:1993 Double-pole cable couplings with earthing contact, 10 A d.c., 16 A a.c., 250 V, degree of protection provided by enclosure IP 56
- DIN EN 62196-3:2015 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers (IEC 62196-3:2014)
- DIN EN 525:1997 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW; German version EN 525:1997
ES-UNE, DC Contactor Country
- UNE-EN 2349-306:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 306: Overload d.c. and a.c. (Endorsed by AENOR in March of 2007.)
- UNE-EN IEC 62196-3:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
- UNE-EN IEC 62196-6:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers intended to be used for DC EV supply equipment where p...
Underwriters Laboratories (UL), DC Contactor Country
- UL 60947-4-2 (ND)-2014 National Differences For UL 60947-4-2 Low-Voltage Switchgear and Controlgear - Part 4-2: Contactors and Motor-Starters - AC Semiconductor Motor Controllers and Starters (First Edition)
- UL 60947-4-1A (ND)-2007 National Differences For UL 60947-4-1A Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Second Edition; Reprint with Revisions Through and Including April 29@ 2011)
- UL 60947-4-1 (ND)-2014 National Differences For UL 60947-4-1 Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters (Third Edition; Reprint with Revisions Through and Including October 17@ 2017)
- UL 60947-4-1 (ND)-2004 National Differences For UL 60947-4-1 Standard for Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Second Edition)
International Electrotechnical Commission (IEC), DC Contactor Country
- IEC 62196-3:2022 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle c
Standard Association of Australia （SAA）, DC Contactor Country
- AS/NZS IEC 62196.3:2023 Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles, Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers
ES-AENOR, DC Contactor Country
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, DC Contactor Country
- PREN 2349-306-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 306: Overload D.C. and A.C. (Edition P 1)
European Committee for Electrotechnical Standardization（CENELEC）, DC Contactor Country
- EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
AENOR, DC Contactor Country
- UNE-EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers
National Electrical Manufacturers Association（NEMA), DC Contactor Country
- NEMA ICS 2 PART 8-1996 CONTROLLERS, CONTACTORS, AND OVERLOAD RELAYS RATED NOT MORE THAN 2000 VOLTS AC OR 750 VOLTS DC, PART 8: DISCONNECT DEVICES FOR USE IN INDUSTRIAL CONTROL EQUIPMENT
Canadian Standards Association (CSA), DC Contactor Country
- CSA/AM CSA/ANSI Z83.4A-2004-2004 Addenda to the Second Edition of
ANSI Z83.4-2003 CSA 3.7-2003
American National Standard/
CSA Standard For
Non-Recirculating Direct Gas-Fired
Industrial Air Heaters